Nickel Complexes Bearing Quinoline Derived NNS Donor Ligands as Catalytic Activators for N-Alkylation of Anilines with Alcohols

Herein, we have reported a new series of NNS-donor ligands coordinated Ni(II) complexes and utilized them as catalytic activator to synthesize N-alkylated amines and 1,2-disubstituted benzimidazoles. The reaction of thiophenol/4-chlorothiophenol/4-methylthiophenol/4-methoxythiophenol with 2-bromo-N-quinolin-8-yl-acetamide in presence of sodium hydroxide in ethanol at 80 °C gave [C9H6N-NH-C(O)-CH2-S-Ar] [Ar=C6H5 (L1); C6H4Cl-4 (L2); C6H4Me-4 (L3) and C6H4-OMe-4 (L4)], respectively. The corresponding reaction of L1-L4 with Ni(OAc)2 in methanol at 80 °C for 3 hours resulted in octahedral nickel complexes [(L1-H)2Ni] (C1), [(L2-H)2Ni] (C2), [(L3-H)2Ni] (C3), and [(L4-H)2Ni] (C4), respectively. All compounds have been characterized by micro and spectroscopic analysis. The molecular structure of complexes C1-C3 has also been determined by single crystal X-ray diffraction data. The utility of complexes C1-C4 were evaluated for the N-alkylation of aniline with benzyl alcohols, and for 1,2-disubstituted benzimidazoles synthesis. The obtained results indicate that complex C1 showed better catalytic activity in both N-alkylation of amines with benzyl alcohols [catalyst loading: 2.0 mol %; Yield up to 92 %], and for 1,2-disubstituted benzimidazoles derivatives [catalyst loading: 2.0 mol %; Yield up to 94 %)]. The mechanistic studies suggested that the reaction works through hydrogen borrowing from benzyl alcohol and its subsequent utilization for in situ reduction of imine. The experimentally observed catalytic reactivity patterns of complexes C1-C4 have found in good agreement with the HOMO-LUMO energy gaps obtained by DFT analysis of corresponding complexes.

Nickel oxide nanoparticles modified with dimethylglyoxime grafted on a cellulose surface as an efficient adsorbent for thin film microextraction of tramadol in biological fluids followed by its determination using HPLC

In the current study, nickel oxide nanoparticles (NiO NPs) modified with dimethylglyoxime (DMG) were deposited onto the cellulose surface (Ni(DMG)2-NiO-Cell) and used as an efficient adsorbent for thin film microextraction (TFME) of tramadol (TRA). The extracted TRA was determined using a high-performance liquid chromatography-ultraviolet detector (HPLC-UV). NiO NPs were synthesized by co-precipitation method on the surface of the cellulose substrate; afterward, its surface was modified by DMG to increase the extraction capability of the thin film toward TRA. The synthesized NiO-Cell and Ni(DMG)2-NiO-Cell thin films were characterized using various techniques. The effect of modification of the NiO thin film with DMG reagent on the extraction efficiency was investigated. The crucial parameters influencing the extraction efficiency, including extraction time, desorption time, desorption solvent, pH and salt content, were investigated via a one-at-a-time approach. The figures of merit for the developed method were evaluated in urine, plasma, and deionized water under the optimized extraction and desorption condition. The limits of detection and limits of quantification were in the range of 0.1 to 1 ng mL-1 and 0.3 to 3 ng mL-1, respectively, for the studied samples. The linear dynamic ranges of the developed TFME-HPLC-UV method were 0.3-1000, 1-2500, and 3-5000 ng mL-1 for the deionized water, urine, and plasma samples, respectively. The reproducibility and repeatability of the developed method was assayed in terms of intra-day, inter-day, and inter-thin film precisions by conducting six-replicate experiments at the concentration level of 0.1 and 1 μg mL-1, which were in the range of 5.9% to 8.3%. The sufficiency and applicability of the developed TFME-HPLC-UV method was investigated by determining TRA in urine and plasma samples, and the resulting relative recoveries (RR%) were 85.9% and 91.7%, respectively.

Stable and reproducible MIP-ECL sensors for ultra-sensitive and accurate quantitative detection of Estrone

Estrone (E1), as an endogenous estrogen, has a variety of physiological functions in human body and is of great significance to human health. On the other hand, it is a widely distributed and highly disturbing environmental endocrine disruptor in water. Therefore, there is an urgent need to develop a sensitive, rapid, and inexpensive method for the on-site determination of E1, which is not only for clinical diagnosis and treatment, but also for the investigation and monitoring of endogenous estrogen pollution in environmental water. In this study, Ru(bpy)3 2+/MWCNTs/Nafion/gold electrodes were prepared by surface electrostatic adsorption and ion exchange. A molecularly imprinted membrane (MIP) with the capability to recognize E1 molecules was prepared by sol-gel method, and the electrodes were modified with MIP to form an electrochemical luminescence sensor (MIP-ECL). This method simultaneously possesses ECL's advantage of high sensitivity and MIP's advantage of high selectivity. Moreover, the addition of carboxylated multi-walled carbon nanotubes (MWCNT-COOH) improved the functionalization of the gold electrode surface and increased the binding sites of MIP. Meanwhile, the good conductivity of MWCNTs promoted electron transfer and further improved the sensitivity of the sensor. The sensor showed a wide linear interval in which the E1 concentrations can range from 0.1 μg/L to 200 μg/L, along with a high linear correlation coefficient (R 2 = 0.999). The linear regression equation of the sensor was Y = 243.64x-79.989, and the detection limit (LOD) was 0.0047 μg/L. To validate our sensor, actual samples were also measured by the reference method (LC-MS/MS), and it was found that the relative deviation of quantitative results of the two different methods was less than 4.1%. This indicates that the quantitative results obtained by this sensor are accurate and can be used for rapid in situ determination of E1 in clinical samples and environmental water.

Molecularly imprinted electrochemiluminescence sensor based on ZIF-8 doped with CdSe quantum dots for the detection of trace estriol

A composite of the metal-organic framework compound ZIF-8 doped with CdSe quantum dots (QDs) with sensitive and stable luminescence was synthesized, and a molecularly imprinted electrochemiluminescence (ECL) sensor was constructed on the basis of this composite. The ZIF-8@CdSe molecularly imprinted ECL sensor combines the high sensitivity of ECL and the high selectivity of molecular imprinting to realize the sensitive and specific detection of estriol. CdSe QDs and gold nanoparticles were encapsulated within ZIF-8 to obtain the ZIF-8@CdSe QDs/GNP (ZIF@CdSe/GNP) composite. Subsequently, the GNPs were further loaded on the surface of this composite to obtain the GNP/ZIF@CdSe/GNP composite. L-cysteine was used to immobilize the GNP/ZIF@CdSe/GNP composite on the surface of a gold electrode to obtain the GNP/ZIF@CdSe/GNP-modified gold electrode. A molecularly imprinted polymer (MIP) film was prepared on the surface of the modified electrode via electropolymerization with o-phenylenediamine as the functional monomer and estriol as the template molecule. After elution, estriol could be specifically recognized by the cavities. The re-adsoption of estriol by the MIP can prevent the coreactant from reaching the electrode surface through the cavities, thereby weakening ECL. A good linear relationship existed between the ∆ECL and lg C of estriol concentrations of 1 × 10^-14 - 1 × 10^-9 mol·L^-1 . The detection limit was as low as 8.9 × 10^-16 mol·L^-1 . The sensor was applied in the determination of estriol in serum samples with a recovery of 97.0 % - 102 %.

A versatile and ultrasensitive molecularly imprinted electrochemiluminescence sensor with HRP-encapsulated liposome labeled by light-triggered click reaction for pesticide residues

A novel approach for trace detection of fipronil with a molecularly imprinted electrochemiluminescence sensor (MIECLS) is proposed. The sensitivity is significantly improved via signal amplification of the enzymatic reaction of horseradish peroxidase (HRP) released from encapsulated liposomes which linked onto the template molecules after rebinding. The molecularly imprinted polymer membrane was prepared through the electropolymerization of monomers with fipronil as a template. After the elution of the template molecules, the analyte fipronil was reabsorbed into the cavities. HRP-encapsulated liposomes were linked to the target molecules by light-triggered click reaction. The higher the concentration of the target was, the more HRP-encapsulated liposomes were present on the molecularly imprinted polymer (MIP) sensor. Then, HRP was liberated from liposomes, and the catalytic degradation of hydrogen peroxide (H₂O₂) by HRP occurs, which changed the electrochemiluminescence intensity of luminol significantly. The change of the ∆ECL intensity was linearly proportional to the logarithm of the fipronil concentration ranging from 1.00 × 10^-14 to 1.00 × 10^-9 mol/L, and the detection limit was 7.77 × 10^-16 mol/L. The recoveries obtained ranged from 95.7 to 105.8% with RSD < 5%. The sensitivity of the detection was significantly improved, and the analysis process was simplified in that the incubation step required in the conventional method was avoided. The sensor proposed provides a feasible platform for ultra-trace amount determination.

Biomimetic electrochemical sensors: New horizons and challenges in biosensing applications

The urge to meet the ever-growing needs of sensing technology has spurred research to look for new alternatives to traditional analytical methods. In this scenario, the glucometer is the flagship of commercial electrochemical sensing platforms, combining selectivity, reliability and portability. However, other types of enzyme-based biosensors seldom achieve the market, in spite of the large and increasing number of publications. The reasons behind their commercial limitations concern enzyme denaturation, and the high costs associated with procedures for their extraction and purification. In this sense, biomimetic materials that seek to imitate the desired properties of natural enzymes and biological systems have come out as an appealing path for robust and sensitive electrochemical biosensors. We herein portray the historical background of these biomimicking materials, covering from their beginnings until the most impactful applications in the field of electrochemical sensing platforms. Throughout the discussion, we present and critically appraise the major benefits and the most significant drawbacks offered by the bioinspired systems categorized as Nanozymes, Synzymes, Molecularly Imprinted Polymers (MIPs), Nanochannels, and Metal Complexes. Innovative strategies of fabrication and challenging applications are further reviewed and evaluated. In the end, we ponder over the prospects of this emerging field, assessing the most critical issues that shall be faced in the coming decade.

DFT Investigation of the Molecular Properties of the Dimethylglyoximato Complexes [M(Hdmg)2] (M = Ni, Pd, Pt)

Important applications of the NiII, PdII and PtII complexes [M(Hdmg)2] (H2dmg = dimethylglyoxime) stem from their metal...metal stacked virtually insoluble aggregates. Given the virtual insolubility of the materials, we postulated that the rare reports on dissolved species in solution do not represent monomolecular species but oligomers. We thus studied the structural and spectral properties of the monomolecular entities of these compounds using density functional theory (DFT) and time-dependent DFT computations in dimethyl sulfoxide (DMSO) as a solvent. The molecular geometries, IR and UV-vis spectra, and frontier orbitals properties were computed using LANL2DZ ecp and def2TZVP as basis sets and M06-2X as the functional. The results are compared with the available experimental and other calculated data. The optimised molecular geometries proved the asymmetric character of the two formed O–H…O bonds which connect the two Hdmg‒ ligands in the completely planar molecules. Calculated UV-vis spectra revealed the presence of three absorptions in the range 180 to 350 nm that are red-shifted along the series Ni–Pd–Pt. They were assigned to essentially ligand-centred π−π* transitions in part with metal(d) to ligand(π*) charge transfer (MLCT) contributions. The notorious d‒p transitions dominating the colour and electronics of the compounds in the solid-state and oligomeric stacks are negligible in our monomolecular models strongly supporting the idea that the previously reported spectroscopic observations or biological effects in solutions are not due to monomolecular complexes but rather to oligomeric dissolved species.

A novel molecularly imprinted electrochemiluminescence sensor based on cobalt nitride nanoarray electrode for the sensitive detection of bisphenol S

A substitute for bisphenol A (BPA), bisphenol S (BPS) has endocrine disruptive and toxic effects and could pose potential risk on human health and the environment. Herein, we fabricated a sensitive molecularly imprinted electrochemiluminescence (MIECL) sensor for the determination of BPS. CoN nanoarray with outstanding electrical conductivity was prepared and it directly served as the sensor platform. Especially, due to the high surface area of the porous CoN nanoarray, the ECL probe of Ru(bpy)3 2+ could be absorbed on the electrode. By means of the cation exchange of Nafion membrane and utilizing tripropylamine (TPrA) as co-reactant, boosted ECL signals were obtained. Meanwhile, by combining with molecularly imprinted polymers (MIPs), the constructed sensor achieved specific recognition of BPS. On the basis of the superior properties of the CoN nanoarray-based electrode, the ECL signal of the proposed sensor was linearly proportional to the BPS concentration from 2.4 × 10-9 to 5.0 × 10-5 mol L-1 (R 2 = 0.9965) with a low limit of detection (LOD) of 8.1 × 10-10 mol L-1 (S/N = 3). To test the accuracy of the proposed method, the HPLC method was adopted to analyze drinking water samples as a comparison. The t-test result proved that discrepancies between HPLC analysis and the method using the fabricated MIECL sensor were acceptable. The developed MIECL sensor with the sensitive, selective, reproducible, and stable analytical performance provides a potential pathway for the detection of BPS and other BPA substitutes in drinking water samples.

Reactivity and Mechanisms of Photoactivated Heterometallic [RuII NiII ] and [RuII NiII RuII ] Catalysts for Dihydrogen Generation from Water

Two heterometallic photocatalysts were designed and probed for water reduction. Both [(bpy)₂ Ru^II Ni^II (L¹ )](ClO₄ )₂ (1) and [(bpy)₂ Ru^II Ni^II (L² )₂ Ru^II (bpy)₂ ](ClO₄ )₂ (2) can generate the low-valent precursor involved in hydride formation prior to dihydrogen generation. However, while the bimetallic [Ru^II Ni^II ] (1) requires the presence of an external photosensitizer to trigger catalytic activity, the trimetallic [Ru^II Ni^II Ru^II ] (2) displays significant coupling between the catalytic and light-harvesting units to promote intramolecular multielectron transfer and perform photocatalysis at the Ni center. A concerted experimental and theoretical effort proposes mechanisms to explain why 1 is unable to achieve self-supported catalysis, while 2 is fully photocatalytic.

Study on Thermal Decomposition Behavior, Gaseous Products, and Kinetic Analysis of Bis-(Dimethylglyoximato) Nickel(II) Complex Using TG-DSC-FTIR-MS Technique

The fiber-like bis-(dimethylglyoximato) nickel(II) complex, Ni(DMG)2 was successfully synthesized. The obtained samples were characterized by SEM-EDS, FT-IR, XRD, and XPS. The TG-DSC-FTIR-MS coupling technique was used to characterize the thermal decomposition behavior and evolved gas analysis of Ni(DMG)2. The non-isothermal decomposition reaction kinetic parameters were obtained by both combined kinetic analysis and isoconversional Vyazovkin methods. It was found that Ni(DMG)2 begins to decompose at around 280 °C, and a sharp exothermic peak is observed in the DSC curve at about 308.2 °C at a heating rate of 10 °C·min−1. The main gaseous products are H2O, NH3, N2O, CO, and HCN, and the content of H2O is significantly higher than that of the others. The activation energy obtained by the combined kinetic analysis method is 170.61 ± 0.65 kJ·mol−1. The decomposition process can be described by the random nucleation and growth of the nuclei model. However, it was challenging to attempt to evaluate the reaction mechanism precisely by one ideal kinetic model.

Fluorometric aptasensor for cadmium(II) by using an aptamer-imprinted polymer as the recognition element

A fluorometric assay is described for the determination of Cd(II) in environmental and agricultural samples. It is making use of a molecularly imprinted polymer (MIP) and aptamer as dual recognition units, while carbon quantum dots (co-doped with sulphur and nitrogen) and gold nanoparticles (SN-CQD/Au) act as the fluorophores. The aptamer-modified MIP was placed on an SN-CQD/Au-modified indium tin oxide glass electrode. Cd(II) was detected with high selectivity by the recognition sites of the aptamer in the MIP. Fluorescence, with excitation/emission peaks at 370/430 nm, is quenched by Cd(II). Response is linear in the 20 pM to 12 nM concentration range. The detection limit is 1.2 pM. The sensor is selective for Cd(II), and recoveries from spiked waters, soils and vegetables real-world samples range between 82.1 and 113.9%. Graphical abstractA fluorescence sensor composed of a molecularly imprinted polymer and an aptamer as a dual identification system for Cd²⁺ coupled with and carbon quantum dots (co-doped with sulphur and nitrogen) and gold nanoparticles (SN-CQDs/Au) as fluorescent element that can detect Cd²⁺ with high selectivity by a dual-recognition mechanism.

Structural, Electronic, and Spectral Properties of Metal Dimethylglyoximato [M(DMG)2; M = Ni2+, Cu2+] Complexes: A Comparative Theoretical Study

Dimethylglyoxime (DMG) usually forms thermodynamically stable chelating complexes with selective divalent transition-metal ions. Electronic and spectral properties of metal-DMG complexes are highly dependent on the nature of metal ions. Using range-separated hybrid functional augmented with dispersion corrections within density functional theory (DFT) and time-dependent DFT, we present a detailed and comprehensive study on structural, electronic, and spectral (both IR and UV-vis) properties of M(DMG)₂ [M = Ni²⁺, Cu²⁺] complexes. Ni(DMG)₂ results are thoroughly compared with Cu(DMG)₂ and also against available experimental data. Stronger H-bonding leads to greater stability of Ni(DMG)₂ with respect to isolated ions (M²⁺ and DMG^-) compared to Cu(DMG)₂. In contrast, a relatively larger reaction enthalpy for Cu(DMG)₂ formation from chemically relevant species is found than that of Ni(DMG)₂ because of the greater binding enthalpy of [Ni(H₂O)₆]²⁺ than that of [Cu(H₂O)₆]²⁺. In dimers, Ni(DMG)₂ is found to be 6 kcal mol^-1 more stable than Cu(DMG)₂ due to a greater extent of dispersive interactions. Interestingly, a modest ferromagnetic coupling (588 cm^-1) is predicted between two spin-¹/₂ Cu²⁺ ions present in the Cu(DMG)₂ dimer. Additionally, the potential energy curves calculated along the O-H bond coordinate for both complexes suggest asymmetry and symmetry in the H-bonding interactions between the H-bond donor and acceptor O centers in the solid-state and in solution, respectively, well corroborating with early experimental findings. Interestingly, a lower proton transfer barrier is obtained for the Ni(DMG)₂ compared to its Cu-analogue due to stronger H-bonding in the former complex. In fact, relatively weaker H-bonding in Cu(DMG)₂ results in blue-shifted O-H stretching modes compared to that in Ni(DMG)₂. On the other hand, qualitatively similar optical absorption spectra are obtained for both complexes with red-shifted peaks found for the Cu(DMG)₂. Finally, computational models for axial mono- and diligand (aqua and ammonia) coordinated M(DMG)₂ complexes are predicted to be energetically feasible and stable with relatively greater binding stability obtained for the ammonia-coordination.

Highly sensitive bioaffinity electrochemiluminescence sensors: Recent advances and future directions

Electrogenerated chemiluminescence (also called electrochemiluminescence and abbreviated ECL) has attracted much attention in various fields of analysis due to the potential remarkably high sensitivity, extremely wide dynamic range and excellent controllability. Electrochemiluminescence biosensor, by taking the advantage of the selectivity of the biological recognition elements and the high sensitivity of ECL technique was applied as a powerful analytical device for ultrasensitive detection of biomolecule. In this review, we summarize the latest sensing applications of ECL bioanalysis in the field of bio affinity ECL sensors including aptasensors, immunoassays and DNA analysis, cytosensor, molecularly imprinted sensors, ECL resonance energy transfer and ratiometric biosensors and give future perspectives for new developments in ECL analytical technology. Furthermore, the results herein discussed would demonstrate that the use of nanomaterials with unique chemical and physical properties in the ECL biosensing systems is one of the most interesting research lines for the development of ultrasensitive electrochemiluminescence biosensors. In addition, ECL based sensing assays for clinical samples analysis and medical diagnostics and developing of immunosensors, aptasensors and cytosensor for this purpose is also highlighted.

Bifacial Passivation of Organic Hole Transport Interlayer for NiO x -Based p-i-n Perovskite Solar Cells

Methoxy-functionalized triphenylamine-imidazole derivatives that can simultaneously work as hole transport materials (HTMs) and interface-modifiers are designed for high-performance and stable perovskite solar cells (PSCs). Satisfying the fundamental electrical and optical properties as HTMs of p-i-n planar PSCs, their energy levels can be further tuned by the number of methoxy units for better alignment with those of perovskite, leading to efficient hole extraction. Moreover, when they are introduced between perovskite photoabsorber and low-temperature solution-processed NiO x interlayer, widely featured as an inorganic HTM but known to be vulnerable to interfacial defect generation and poor contact formation with perovskite, nitrogen and oxygen atoms in those organic molecules are found to work as Lewis bases that can passivate undercoordinated ion-induced defects in the perovskite and NiO x layers inducing carrier recombination, and the improved interfaces are also beneficial to enhance the crystallinity of perovskite. The formation of Lewis adducts is directly observed by IR, Raman, and X-ray photoelectron spectroscopy, and improved charge extraction and reduced recombination kinetics are confirmed by time-resolved photoluminescence and transient photovoltage experiments. Moreover, UV-blocking ability of the organic HTMs, the ameliorated interfacial property, and the improved crystallinity of perovskite significantly enhance the stability of PSCs under constant UV illumination in air without encapsulation.

A molecularly imprinted electrochemiluminescence sensor for ultrasensitive HIV-1 gene detection using EuS nanocrystals as luminophore

Development of simple, sensitive and specific method for human immunodeficiency virus (HIV) assays are urgently demand. In this study, we developed a novel molecularly imprinted polymer (MIP) electrochemiluminescence (MIP-ECL) sensor for the highly sensitive and selective HIV-1 gene detection using Europium sulfide nanocrystals (EsNCs) as signal producing compound. Here, the HIV aptamer as the template and o-phenylenediamine as the functional monomer, were electropolymerized directly on the surface of ITO electrode. With the hybridization reaction between the assemblies of EuS NCs functionalized 5-amino-labeled oligonucleotides as capture probes and oligonucleotides as detection target (HIV gene), the ECL signal significantly increased using K₂S₂O₈ as coreactant. Taking advantage of both MIP-ECL assays and the strong electrochemiluminescence emission of EuS NCs, the sensitive and selective HIV gene detection has been achieved in a linear range 3.0 fM to 0.3 nM with a detection limit of 0.3 fM. The present MIP-ECL biosensor showed good specificity for HIV DNA detection compared to non-complementary and two bases mismatched sequences. The proposed ECL biosensor was applied to detect of HIV DNA in real human serum samples and satisfactory results were obtained. Due to high sensitivity and selectivity, excellent reproducibility and stability of the proposed assay, EuS NCs can be used as novel luminophore for development of MIP-ECL sensors for detection of other DNA biomarkers.

Molecularly imprinted sensor based on Russian Matryoshka structured molecules for enhanced specific identification and double amplification in ultra-trace Tb3+ determination

The selective and sensitive detection of rare earth elements is thought to be difficult because the concentration of those elements in the sample is commonly at a low level and they normally have severe mutual interference which is caused by homologous chemical properties. In this study, a novel molecularly imprinted polymer (MIP) sensor was fabricated for highly sensitive and selective determination of ultra-trace Tb³⁺. The Tb³⁺-ethylenediaminetetraacetic acid complex (Tb-EDTA) as the template molecule was incorporated into mono-6-mercapto-β-cyclodextrin (mono-6-SH-β-CD) to form a Russian Matryoshka (RM)-structured molecule (CD/Tb-EDTA). Titanium isopropoxide was utilized in vapor sol-gel polymerization to construct MIP membrane. Moreover, the selectivity of the RM MIP sensor was remarkably enhanced by the "triple-selectivity" recognition of EDTA-to-Tb³⁺, β-CD-to-(Tb-EDTA), and 3D cavity-to-(CD/Tb-EDTA), while the sensitivity of the MIP sensor was significantly improved by ECL signal enhancement based on double amplification, in other words, the electrochemiluminescence resonance energy transfer (ECL-RET) between the ECL donor of CD/Tb-EDTA and the ECL acceptor of Ru(bpy)₃²⁺, and the ECL enhancement by the co-reactant of CD/Tb-EDTA on Ru(bpy)₃Cl₂. When the imprinted cavities were occupied by Tb-EDTA during rebinding, the host-guest inclusion structured complex was formed and the ECL intensities produced by the Ru(bpy)₃Cl₂ ECL system increased with increasing concentration of Tb-EDTA. The proposed sensor was used for quantitative analysis of Tb³⁺ with concentrations ranging from 8.00 × 10^-13 mol/L to 4.00 × 10^-9 mol/L and successfully applied to detect Tb³⁺ in seawater samples. The detection limit of the sensor was found to be 3.90 × 10^-13 mol/L (DL = 3δ_b/K), which is lower than previously reported values. Thus, the fabricated sensor is feasible for practical applications.

Electrochemiluminescence biosensing based on different modes of switching signals

Electrochemiluminescence (ECL) has attracted much attention in various fields of analysis owing to low background signals, high sensitivity, and excellent controllability.

Current Progress of Nanomaterials in Molecularly Imprinted Electrochemical Sensing

Nanomaterials have received much attention during the past decade because of their excellent optical, electronic, and catalytic properties. Nanomaterials possess high chemical reactivity, also high surface energy. Thus, provide a stable immobilization platform for biomolecules, while preserving their reactivity. Due to the conductive and catalytic properties, nanomaterials can also enhance the sensitivity of molecularly imprinted electrochemical sensors by amplifying the electrode surface, increasing the electron transfer, and catalyzing the electrochemical reactions. Molecularly imprinted polymers that contain specific molecular recognition sites can be designed for a particular target analyte. Incorporating nanomaterials into molecularly imprinted polymers is important because nanomaterials can improve the response signal, increase the sensitivity, and decrease the detection limit of the sensors. This study describes the classification of nanomaterials in molecularly imprinted polymers, their analytical properties, and their applications in the electrochemical sensors. The progress of the research on nanomaterials in molecularly imprinted polymers and the application of nanomaterials in molecularly imprinted polymers is also reviewed.

K-junction structure mediated exponential signal amplification strategy for microRNA detection in electrochemiluminescence biosensor

Based on the novel designed K-junction structure, an economic and efficient exponential signal amplification strategy with simple protocol combining hemin/G-quadruplex, a mimetic peroxidase, as a catalyzer was proposed and utilized in an electrochemiluminescence biosensor for sensitive microRNA detection.