f-Element Zintl Chemistry: Actinide-Mediated Dehydrocoupling of H2Sb1- Affords the Trithorium and Triuranium Undeca-Antimontriide Zintl Clusters [{An(TrenTIPS)}3(μ3-Sb11)] (An = Th, U; TrenTIPS = {N(CH2CH2NSiiPr3)3}3-)

Reaction of the cesium antimonide complex [Cs(18C6)2][SbH2] (1, 18C6 = 18-crown-6 ether) with the triamidoamine actinide separated ion pairs [An(TrenTIPS)(L)][BPh4] (TrenTIPS = {N(CH2CH2NSiiPr3)3}3-; An/L = Th/DME (2Th); U/THF (2U)) affords the triactinide undeca-antimontriide Zintl clusters [{An(TrenTIPS)}3(μ3-Sb11)] (An = Th (3Th), U (3U)) by dehydrocoupling. Clusters 3Th and 3U provide two new examples of the Sb113- Zintl trianion and are unprecedented examples of molecular Sb113- being coordinated to anything since all previous reports featured isolated Sb113- Zintl trianions in separated ion quadruple formulations with noncoordinating cations. Quantum chemical calculations describe dominant ionic An-Sb interactions in 3Th and 3U, though the data suggest that the latter exhibits slightly more covalent An-Sb linkages than the former. Complexes 3Th and 3U have been characterized by single crystal X-ray diffraction, NMR, IR, and UV/vis/NIR spectroscopies, elemental analysis, and quantum chemical calculations.

Extension and Fusion of Cyclic Polyantimony Units

The synthesis and characterization of a series of polyantimony anionic clusters are reported. The products [(NbCp)2Sb10]2-, [MSb13]3- (M = Ru/Fe), and [MSb15]3- (M = Ru/Fe) were isolated as either K(18-crown-6) or K([2.2.2]-crypt) salts. The Sb10 ring contained in the [(NbCp)2Sb10]2- cluster can be viewed as an extension of two envelope-like cyclo-Sb5 units and represents by far the largest monocyclic all-antimony species. The clusters [MSb13]3- and [MSb15]3- (M = Ru/Fe) illustrate the variability of crown-like Sb8 ring motifs and reveal the fusion of different antimony fragments featuring unique Sb-Sb chain-like units. The reported synthetic approaches involve the fabrication of a variety of distinctive polyantimony anionic clusters, enhancing our understanding of the coordination chemistry of heavier group 15 elements.

Main group cyanides: from hydrogen cyanide to cyanido-complexes

Homoleptic cyanide compounds exist of almost all main group elements. While the alkali metals and alkaline earth metals form cyanide salts, the cyanides of the lighter main group elements occur mainly as covalent compounds. This review gives an overview of the status quo of main group element cyanides and cyanido complexes. Information about syntheses are included as well as applications, special substance properties, bond lengths, spectroscopic characteristics and computations. Cyanide chemistry is presented mainly from the field of inorganic chemistry, but aspects of chemical biology and astrophysics are also discussed in relation to cyano compounds.

Understanding the Mechanism of Diels-Alder Reactions with Anionic Dienophiles: A Systematic Comparison of [ECX]- (E = P, As; X = O, S, Se) Anions

While Diels–Alder (DA) reactions involving neutral or cationic dienophiles are well-known, the characteristics of the analogous reactions with anionic dienophiles are practically unexplored. Herein we present the first comparative computational investigations on the characteristics of DA cycloadditions with anionic dienophiles on the basis of the reactions of [ECX]⁻ anions (E = P, As; X = O, S, Se) with 2H-pyran-2-one. All of these reactions were found to be both kinetically and thermodynamically feasible, enabling synthetic access toward 2-phosphaphenolate and arsaphenolate derivatives in the future. This study also reveals that the [ECO]⁻ anions show clear regioselectivity, while for [ECS]⁻ and [ECSe]⁻ anions, the two possible reaction channels have very similar energetics. Additionally, the activation barriers for the [ECO]⁻ anions are lower than those of the heavier analogues. The observed differences can be traced back to the starkly differing nucleophilic character of the pnictogen center in the anions, leading to a barrier-lowering effect in the case of the [ECO]⁻ anions. Furthermore, analysis of the geometries and electron distributions of the corresponding transition states revealed structure–property relationships, and thus a direct comparison of the cycloaddition reactivity of these anions was achieved. Along one of the two pathways, a good correlation was found between the activation barriers and suitable nucleophilicity descriptors (nucleophilic Parr function and global nucleophilicity). Additionally, the tendency of the reaction energies can be explained by the changing aromaticity of the products.

In contrast to the phosphaethynolate [PCO]⁻ anion, the cycloaddition reactivity of the heavier congeners ([ECX]⁻, where E = P, As and X = O, S, Se) is unexplored. In this computational study, the Diels−Alder reaction between the known [ECX]⁻ anions and 2-pyrone was employed to compare the reactivity patterns. The first activation barrier of these reactions correlates with the nucleophilicity of the anions, indicating a barrier-lowering effect. The feasibility of the studied reactions, leading to P and As heterocycles, was also explored.

Recent advances in the chemistry of the phosphaethynolate and arsaethynolate anions

Over the past decade, the reactivity of 2-phosphaethynolate (OCP^-), a heavier analogue of the cyanate anion, has been the subject of momentous interest in the field of modern organometallic chemistry. It is used as a precursor to novel phosphorus-containing heterocycles and as a ligand in decarbonylative processes, serving as a synthetic equivalent of a phosphinidene derivative. This perspective aims to describe advances in the reactivities of phosphaethynolate and arsaethynolate anions (OCE^-; E = P, As) with main-group element, transition metal, and f-block metal scaffolds. Further, the unique structures and bonding properties are discussed based on spectroscopic and theoretical studies.

A Thermally Stable Magnesium Phosphaethynolate Grignard Complex

The 2-phosphaethynolate (OCP) anion has found versatile applications across the periodic table but remains underexplored in group 2 chemistry due to challenges in isolating thermally stable complexes. By rationally modifying their coordination environments using 1,3-dialkyl-substituted N-heterocyclic carbenes (NHCs), we have now isolated and characterized thermally stable, structurally diverse, and hydrocarbon soluble magnesium phosphaethynolate complexes (2, 4^Me, and 8-10), including the novel phosphaethynolate Grignard reagent (2^iPr). The methylmagnesium phosphaethynolate and magnesium diphosphaethynolate complexes readily activate dioxane with subsequent H-atom abstraction to form [(NHC)MgX(μ-OEt)]₂ [X = Me (3) or OCP (8 and 9)] complexes. Their reactivities increased with the Lewis acidity of the Mg²⁺ cation and may be attenuated by Lewis base saturation or a slight increase in carbene sterics. Solvent effects were also investigated and led to the surreptitious isolation of an ether-free sodium phosphaethynolate (NHC)₃Na(OCP) (6), which is soluble in aromatic hydrocarbons and can be independently prepared by the reaction of NHC and [Na(dioxane)₂][OCP] in toluene. Under forcing conditions (105 °C, 3 days), the magnesium diphosphaethynolate complex (NHC)₃Mg(OCP)₂ (10) decomposes to a mixture of organophosphorus complexes, among which a thermal decarbonylation product [(NHC)₂P^I][OCP] (11) was isolated.

Indirect Access to Carbene Adducts of Bismuth- and Antimony-Substituted Phosphaketene and Their Unusual Thermal Transformation to Dipnictines and [(NHC)2OCP][OCP]

The synthesis and thermal redox chemistry of the first antimony (Sb)– and bismuth (Bi)–phosphaketene adducts are described. When diphenylpnictogen chloride [Ph₂PnCl (Pn = Sb or Bi)] is reacted with sodium 2-phosphaethynolate [Na[OCP]·(dioxane)_x], tetraphenyldipnictogen (Ph₂Pn–PnPh₂) compounds are produced, and an insoluble precipitate forms from solution. In contrast, when the N-heterocyclic carbene adduct (NHC)–PnPh₂Cl is combined with [Na[OCP]·(dioxane)_x], Sb– and Bi–phosphaketene complexes are isolated. Thus, NHC serves as an essential mediator for the reaction. Immediately after the formation of an intermediary pnictogen–phosphaketene NHC adduct [NHC–PnPh₂(PCO)], the NHC ligand transfers from the Pn center to the phosphaketene carbon atom, forming NHC–C(O)P-PnPh₂ [Pn = Sb (3) or Bi (4)]. In the solid state, 3 and 4 are dimeric with short intermolecular Pn–Pn interactions. When compounds 3 and 4 are heated in THF at 90 and 70 °C, respectively, the pnictogen center Pn^III is thermally reduced to Pn^II to form tetraphenyldipnictines (Ph₂Pn–PnPh₂) and an unusual bis-carbene-supported OCP salt, [(NHC)₂OCP][OCP] (5). The formation of compound 5 and Ph₂Pn–PnPh₂ from 3 or 4 is unique in comparison to the known thermal reactivity for group 14 carbene–phosphaketene complexes, further highlighting the diverse reactivity of [OCP]⁻ with main-group elements. All new compounds have been fully characterized by single-crystal X-ray diffraction, multinuclear NMR spectroscopy (¹H, ¹³C, and ³¹P), infrared spectroscopy, and elemental analysis (1, 2, and 5). The electronic structure of 5 and the mechanism of formation were investigated using density functional theory (DFT).

An N-heterocyclic carbene (NHC) was used to support the otherwise unstable Ph₂Sb—P=C=O and Ph₂Bi—P=C=O moieties. Exploration of the thermal chemistry of these NHC−phosphaketene adducts reveals the formation of the salt [NHC₂OCP][OCP]. This present work demonstrates the thermal chemistry of the 2-phospaethynolate anion with heavier pnictogens (Sb and Bi).

Heavy Chalcogenide-Based Ionic Liquids in Syntheses of Metal Chalcogenide Materials near Room Temperature

This minireview describes two strategically different and unexplored approaches to use ionic liquids (IL) containing weakly solvated and highly reactive chalcogenide anions [E-SiMe3 ]- and [E-H]- of the heavy chalcogens (E=S, Se, Te) in materials synthesis near room temperature. The first strategy involves the synthesis of unprecedented trimethylsilyl chalcogenido metalates Cat+ [M(E-SiMe3 )n ]- (Cat=organic IL cation) of main group and transition metals (M=Ga, In, Sn, Zn, Cu, Ag, Au). These fully characterized homoleptic metalates serve as thermally metastable precursors in low-temperature syntheses of binary, ternary and even quaternary chalcogenide materials such as CIGS and CZTS relevant for semiconductor and photovoltaics (PV) applications. Furthermore, thermally and protolytically metastable coinage metalates Cat+ [M(ESiMe3 )2 ]- (M=Cu, Ag, Au; E=S, Se) are accessible. Finally, the use of precursors BMPyr[E-SiMe3 ] (E=Se,Te; BMPyr=1-butyl-1-methylpyrrolidinium) as sources of activated selenium and tellurium in the synthesis of high-grade thermoelectric nanoparticles Bi2 Se3 and Bi2 Te3 is shortly highlighted. The second synthesis strategy involves the metalation of ionic liquids Cat[S-H] and Cat[Se-H] by protolytically highly active metal alkyls or amides Rn M. This rather general approach towards unknown chalcogenido metalates Catm [Rn-1 M(E)]m (E=S, Se) will be demonstrated in a research paper following this short review head-to-tail.

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 "Material Synthesis near Room Temperature",which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO3 Me]- , served as starting material and enabled facile access to pseudohalide salts by reaction with Me3 Si-X (X=CN, N3 , OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu3 MeN][B(OMe)3 (CN)], we were able to crystallize the double salt [nBu3 MeN]2 [B(OMe)3 (CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)2 ]- and the temperature labile solvate anions [CN(HCN)n ]- (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N3 , OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)3 ] (X=N3 , OCN) and [PPN][SCN(HCN)2 ] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)2 ]- , crystallizing as HCN disolvate [PPN][P(CN⋅HCN)2 ]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl0.78 (CN)5.22 ]2- and [SiF(CN)5 ]2- and the hexa-substituted [Si(CN)6 ]2- by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et3 HN]2 [Si(CN)6 ] with MOH (M=Li, K), Li2 [Si(CN)6 ] ⋅ 2 H2 O and K2 [Si(CN)6 ] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M2 [Si(CN)6 ] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]2 [Si(CN)6 ]. When reacting [Mes(nBu)Im]2 [Si(CN)6 ] with an excess of the strong Lewis acid B(C6 F5 )3 , the voluminous adduct anion {Si[CN⋅B(C6 F5 )3 ]6 }2- was obtained.

Trapping of Brønsted acids with a phosphorus-centered biradicaloid - synthesis of hydrogen pseudohalide addition products

The trapping of classical hydrogen pseudohalides (HX, X = pseudohalogen = CN, N3, NCO, NCS, and PCO) utilizing a phosphorus-centered cyclic biradicaloid, [P(μ-NTer)]2, is reported. These formal Brønsted acids were generated in situ as gases and passed over the trapping reagent, the biradicaloid [P(μ-NTer)]2, leading to the formation of the addition product [HP(μ-NTer)2PX] (successful for X = CN, N3, and NCO). In addition to this direct addition reaction, a two-step procedure was also applied because we failed in isolating HPCO and HNCS addition products. This two-step process comprises the generation and isolation of the highly reactive [HP(μ-NTer)2PX]+ cation as a [B(C6F5)4]- salt, followed by salt metathesis with salts such as [cat]X (cat = PPh4, n-Bu3NMe), which also gives the desired [HP(μ-NTer)2PX] product, with the exception of the reaction with the PCO- salt. In this case, proton migration was observed, finally affording the formation of a [3.1.1]-hetero-propellane-type cage compound, an OC(H)P isomer of a HPCO adduct. All discussed species were fully characterized.

Frontiers in the solution-phase chemistry of homoatomic group 15 Zintl clusters

Recent developments in the solution-phase chemistry of polypnictogen Zintl cluster are discussed, including the preparation of new clusters, wet synthetic methods, and their subsequent small molecule activations.

Organic salts utilising the hexamethylguanidinium cation: the influence of the anion on the structural, physical and thermal properties

The synthesis and characterisation of new solid-state electrolytes is a key step in advancing the development of safer and more reliable electrochemical energy storage technologies. Organic ionic plastic crystals (OIPCs) are an increasingly promising class of material for application in devices such as lithium or sodium metal batteries as they can support high ionic conductivity, with good electrochemical and thermal stability. However, the choice of OIPC-forming ions is still relatively limited. Furthermore, understanding of the influence of different cations and anions on the thermal, structural and transport properties of these materials is still in its infancy. Here we report the synthesis and in-depth characterisation of a range of new OIPCs utilising the hexamethylguanidinium cation ([HMG]) with five different anions. The thermal, structural, transport properties and free volume in the different salts have been investigated. The free volume within the salts has been investigated by positron annihilation lifetime spectroscopy, and the single crystal and powder X-ray diffraction analysis of [HMG] bis(trifluoromethanesulfonyl)imide ([TFSI]) in phase I and II, [HMG] hexafluorophosphate ([PF₆]) and [HMG] tetrafluoroborate ([HMG][BF₄]) are reported. The HMG cation can exhibit significant disorder, which is advantageous for plasticity and future use of these materials as high ionic conductivity matrices. The bis(fluorosulfonyl)imide salt, [HMG][FSI], is identified as particularly promising for use as an electrolyte, with good electrochemical stability and soft mechanical properties. The findings introduce a range of new materials to the solid-state electrolyte arena, while the insights into the physico-chemical relationships in these materials will be of importance for the future development and understanding of other ionic electrolytes.

Trapping of a Highly Bent and Reduced Form of 2-Phosphaethynolate in a Mixed-Valence Diuranium-Triamidoamine Complex

The chemistry of 2-phosphaethynolate is burgeoning, but there remains much to learn about this ligand, for example its reduction chemistry is scarce as this promotes P-C-O fragmentations or couplings. Here, we report that reduction of [U(Tren^TIPS )(OCP)] (Tren^TIPS =N(CH₂ CH₂ NSiPrⁱ ₃ )₃ ) with KC₈ /2,2,2-cryptand gives [{U(Tren^TIPS )}₂ {μ-η² (OP):η² (CP)-OCP}][K(2,2,2-cryptand)]. The coordination mode of this trapped 2-phosphaethynolate is unique, and derives from an unprecedented highly reduced and highly bent form of this ligand with the most acute P-C-O angle in any complex to date (P-C-O ∡ ≈127°). The characterisation data support a mixed-valence diuranium(III/IV) formulation, where backbonding from uranium gives a highly reduced form of the P-C-O unit that is perhaps best described as a uranium-stabilised OCP^2-. radical dianion. Quantum chemical calculations reveal that this gives unprecedented carbene character to the P-C-O unit, which engages in a weak donor-acceptor interaction with one of the uranium ions.

Salen supported Al–O–CP and Ga–PCO complexes

The synthesis and reactivity of salen supported OCP adducts of aluminium and gallium is reported.

The Chemistry of the 2-Phosphaethynolate Anion

In all likelihood the first synthesis of the phosphaethynolate anion, PCO^- , was performed in 1894 when NaPH₂ was reacted with CO in an attempt to make Na(CP) accompanied by elimination of water. This reaction was repeated 117 years later when it was discovered that Na(OCP) and H₂ are the products of this remarkable transformation. Li(OCP) was synthesized and fully characterized in 1992 but this salt proved to be too unstable to allow for a detailed investigation of its chemistry. It was not until the heavier analogues of this lithium salt were isolated, Na(OCP) and K(OCP) (both of which are remarkably stable and can be even dissolved in water), that the chemistry of this new functional group could be explored. Here we review the chemistry of the 2-phosphaethynolate anion, a heavier phosphorus-containing analogue of the cyanate anion, and describe the wide breadth of chemical transformations for which it has been thus far employed. Its use as a ligand, in decarbonylative and deoxygenative processes, and as a building block for novel heterocycles is described. In the mere twenty-six years since Becker first reported the isolation of this remarkable anion, it has become a fascinating reagent for the synthesis of a vast library of, often unprecedented, molecules and compounds.

Crystal structure of Zn(ZnCl4)2(Cho)2: the transformation of ions to neutral species in a deep eutectic system

The ions of the ZnCl₂/choline chloride deep eutectic system form a neutral complex by coordination to a central metal ion.