Construction of a ternary component chip with enhanced desorption efficiency for laser desorption/ionization mass spectrometry based metabolic fingerprinting

Introduction: In vitro metabolic fingerprinting encodes diverse diseases for clinical practice, while tedious sample pretreatment in bio-samples has largely hindered its universal application. Designed materials are highly demanded to construct diagnostic tools for high-throughput metabolic information extraction. Results: Herein, a ternary component chip composed of mesoporous silica substrate, plasmonic matrix, and perfluoroalkyl initiator is constructed for direct metabolic fingerprinting of biofluids by laser desorption/ionization mass spectrometry. Method: The performance of the designed chip is optimized in terms of silica pore size, gold sputtering time, and initiator loading parameter. The optimized chip can be coupled with microarrays to realize fast, high-throughput (∼second/sample), and microscaled (∼1 μL) sample analysis in human urine without any enrichment or purification. On-chip urine fingerprints further allow for differentiation between kidney stone patients and healthy controls. Discussion: Given the fast, high throughput, and easy operation, our approach brings a new dimension to designing nano-material-based chips for high-performance metabolic analysis and large-scale diagnostic use.

Diagnosing, Typing, and Staging of Renal Cell Carcinoma by Designer Matrix-Based Urinary Metabolic Analysis

Molecular diagnosing, typing, and staging have been considered to be the ideal alternatives of imaging-based detection methods in clinics. Designer matrix-based analytical tools, with high speed, throughout, efficiency and low/noninvasiveness, have attracted much attention recently for in vitro metabolite detection. Herein, we develop an advanced metabolic analysis tool based on highly porous metal oxides derived from available metal-organic frameworks (MOFs), which elaborately inherit the morphology and porosity of MOFs and newly incorporate laser adsorption capacity of metal oxides. Through optimized conditions, direct high-quality fingerprinting spectra in 0.5 μL of urine are acquired. Using these fingerprinting spectra, we can discriminate the renal cell carcinoma (RCC) from healthy controls with higher than 0.99 of area under the curve (AUC) values (R²Y(cum) = 0.744, Q² (cum) = 0.880), as well, from patients with other tumors (R²Y(cum) = 0.748, Q²(cum) = 0.871). We also realize the typing of three RCC subtypes, including clear cell RCC, chromophobe RCC (R²Y(cum) = 0.620, Q²(cum) = 0.656), and the staging of RCC (R²Y(cum) = 0.755, Q²(cum) = 0.857). Moreover, the tumor sizes (threshold value is 3 cm) can be remarkably recognized by this advanced metabolic analysis tool (R²Y(cum) = 0.710, Q²(cum) = 0.787). Our work brings a bright prospect for designer matrix-based analytical tools in disease diagnosis, typing and staging.

Exfoliation of metal-organic framework nanosheets using surface acoustic waves

Two-dimensional (2D) metal-organic framework (MOF) nanosheets have recently received extensive attention due to their ultra-thin thickness, large specific surface area, chemical and functional designability. In this study, an unconventional method using surface acoustic wave (SAW) technology is proposed to exfoliate large quantities and uniform layers of 2D MOF-Zn₂(bim)₄ nanosheets in a microfluidic system. We successfully demonstrated that the thickness of 2D MOF is effectively and accurately controlled by optimizing the SAW parameters. The mechanisms for the efficient exfoliation of 2D MOF nanosheets is attributed to both the electric and acoustic fields generated by the SAWs in the liquid. The electric field ionizes the methanol to produce H⁺ ions, which intercalate Zn₂(bim)₄ sheets and weaken the interlayer bonding, and the strong shear force generated by SAWs separates the MOF sheets. A yield of 66% for monolayer MOFs with a maximum size of 3.5 μm is achieved under the combined effect of electric and acoustic fields. This fast, low-energy exfoliation platform has the potential to provide a simple and scalable microfluidic exfoliation method for production of large-area and quantities of 2D MOFs.

NH2NH-MOF: a reaction matrix for the specific determination of small aldehydes by MALDI-MS

Efficient determination of aldehydes by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is hampered mainly by the low mass and unstable nature of analytes. In the present work, we propose a combined strategy of a reactive metal-organic framework (MOF) matrix for the derivatization and detection of aldehydes. A novel reactive MOF matrix (NH₂NH-MOF) was synthesized in two steps. First, NR₃⁺-MOF was synthesized via Cu²⁺ and the quaternary amine ligand 4,4'-bipyridinium, 1,1″-(1,2-ethanediyl)bis-, dibromide (PyEtBr). Then, -NHNH₂ was introduced to NR₃⁺-MOF through electrostatic adsorption between the -NR₃⁺ and -HSO₃^- of 4-hydrazinylbenzenesulfonic acid to synthesize NH₂NH-MOF. The acid-base chemistry of NH₂NH-MOF led to uniform cocrystallization of the aldehyde-matrix mixtures and helped to achieve the detection of low-weight aldehydes with good relative standard deviations (RSDs = 0.07-12.35%). It was confirmed that this strategy can accurately quantify formaldehyde, valeraldehyde, and benzaldehyde with good linearity (r > 0.97). Furthermore, this strategy was applied to quantitatively detect benzaldehyde in wastewater, thus showing potential applications in environmental pollutant detection.

Advances and challenges in the development of nanosheet membranes

The development of highly efficient separation membranes utilizing emerging materials with controllable pore size and minimized thickness could greatly enhance the broad applications of membrane-based technologies. Having this perspective, many studies on the incorporation of nanosheets in membrane fabrication have been conducted, and strong interest in this area has grown over the past decade. This article reviews the development of nanosheet membranes focusing on two-dimensional materials as a continuous phase, due to their promising properties, such as atomic or nanoscale thickness and large lateral dimensions, to achieve improved performance compared to their discontinuous counterparts. Material characteristics and strategies to process nanosheet materials into separation membranes are reviewed, followed by discussions on the membrane performances in diverse applications. The review concludes with a discussion of remaining challenges and future outlook for nanosheet membrane technologies.

Nanostructured Substrates as Matrices for Surface Assisted Laser Desorption/Ionization Mass Spectrometry: A Progress Report from Material Research to Biomedical Applications

Within the past two decades, the escalation of research output in nanotechnology fields has boosted the development of novel nanoparticles and nanostructured substrates for use as matrices in surface assisted laser desorption/ionization mass spectrometry (SALDI-MS). The application of nanomaterials as matrices, rather than organic matrices, offers remarkable characteristics that allow the analysis of small molecules with fewer matrix interfering peaks, and share higher detection sensitivity, specificity, and reproducibility. The technological advancement of SALDI-MS has in turn, propelled the application of the analytical technique in the field of biomedical analysis. In this review, the properties and fabrication methods of nanostructured substrates in SALDI-MS such as metallic-, carbon-, and silicon-based nanostructures, quantum dots, metal-organic frameworks, and covalent-organic frameworks are described. Additionally, the latest progress (most within 5 years) of biomedical applications in small molecule, large biomolecule, and MS imaging analysis including metabolite profiling, drug monitoring, bacteria identification, disease diagnosis, and therapeutic evaluation are demonstrated. Key parameters that govern nanomaterial's SALDI efficiency in biomolecule analysis are also discussed. Finally, perspectives of the future development are given to provide a better advancement and promote practical application in clinical MS.

Engineering of nanomaterials for mass spectrometry analysis of biomolecules

Mass spectrometry (MS) based analysis has received intense attention in diverse biological fields. However, direct MS interrogation of target biomolecules in complex biological samples is still challenging, due to the extremely low abundance and poor ionization potency of target biological species. Innovations in nanomaterials create new auxiliary tools for deep and comprehensive MS characterization of biomolecules. More recently, growing research interest has been directed to the compositional and structural engineering of nanomaterials for enriching target biomolecules prior to MS analysis, enhancing the ionization efficiency in MS detection and designing biosensing nanoprobes in sensitive MS readout. In this review, we mainly focus on the recent advances in the engineering of nanomaterials towards their applications in sample pre-treatment, desorption/ionization matrices and ion signal amplification for MS profiling of biomolecules. This review will provide a toolbox of nanomaterials for researchers devoted to developing analytical methods and practical applications in the biological MS field.

Nanocomposite-Based Matrices in Laser Desorption/Ionization Mass Spectrometry for Small-Molecule Analysis

The efficient detection of small molecules is of significance for environmental monitoring, pharmacology, metabolomics, and lipidomics. The laser desorption/ionization mass spectrometry (LDI MS) platform enables high sensitivity, accuracy, resolution, and throughput in molecular analysis, but its analytical capability with respect to small molecules is limited due to inherent drawbacks arising from conventional organic matrices. The selection of an appropriate matrix is thus a precondition for small molecule detection by LDI MS. To date, various inorganic matrices have been developed, with a growing interest in composite materials displaying synergetic effects. This Minireview highlights the development of nanocomposites as LDI matrices driven by numerous innovations in material science, and their emerging use in small-molecule analysis.

Ultrasensitive detection of protein biomarkers by MALDI-TOF mass spectrometry based on ZnFe2O4 nanoparticles and mass tagging signal amplification

A facile MALDI-TOF mass spectrometric platform for quantitative analysis of protein biomarkers was developed based on magnetic ZnFe₂O₄ nanoparticles and mass tagging signal amplification. In this platform, magnetic ZnFe₂O₄ nanoparticles functionalized with an aptamer of the biomarker of interest was used to magnetically separate silica nanoparticles modified with another aptamer of the target biomarker and a barcoding peptide from solution phase in the presence of the biomarker of interest. After the silica nanoparticles were dissolved by KHF₂, the released barcoding peptide was detected by MALDI-TOF mass spectrometry with magnetic ZnFe₂O₄ nanoparticles used as assisting matrix of laser desorption ionization. Since the mass spectral intensity of the barcoding peptide is directly related to the concentration of the target biomarker, the proposed platform can be applied to the quantification of the target biomarker in complex biological samples. The effectiveness of the proposed platform was tested on the detection of carcinoembryonic antigen (CEA) in serum. Experimental results revealed that the proposed platform could achieve quite reliable quantitative results for CEA in human serum samples with accuracy comparable to a commercial CEA ELISA Kit. Its limit of detection and limit of quantification for CEA were estimated to be 0.6 × 10^-3 and 1.8 × 10^-3 ng/mL, respectively, considerably lower than the corresponding values reported in literature. Due to its features of simplicity in design, extremely low background signal, high sensitivity and selectivity, the proposed method can be further developed to be a competitive alternative for the quantification of CEA and other protein biomarkers as well.

Recent developments in pre-treatment and analytical techniques for synthetic polymers by MALDI-TOF mass spectrometry

A great deal of effort has been expended to develop accurate means of determining the properties of synthetic polymers using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry (MS). Many studies have focused on the importance of sample pre-treatment to obtain accurate analysis results. This review discusses the history of synthetic polymer characterization and highlights several applications of MALDI-TOF MS that recognize the importance of pre-treatment technologies. The subject area is of significance in the field of analytical chemistry, especially for users of the MALDI technique. Since the 2000s, many such technologies have been developed that feature improved methods and conditions, including solvent-free systems. In addition, the recent diversification of matrix types and the development of carbon-based matrix materials are described herein together with the current status and future directions of MALDI-TOF MS hardware and software development. We provide a summary of processes used for obtaining the best analytical results with synthetic polymeric materials using MALDI-TOF MS.

Recent development of nanoparticle-assisted metabolites analysis with mass spectrometry

Metabolomics systematically studies the changes of metabolites in biological systems in the temporal or spatial dimensions. It is a challenging task for comprehensive analysis of metabolomics because of diverse physicochemical properties and wide concentration distribution of metabolites. Used as enrichment sorbents, chemoselective probes, chromatographic stationary phases, MS ionization matrix, nanomaterials play excellent roles in improving the selectivity, separation performance, detection sensitivity and identification efficiency of metabolites when mass spectrometry is employed as the detection technique. This review summarized the recent development of nanoparticle-assisted metabolites analysis in terms of assisting the pretreatment of biological samples, improving the separation performance and enhancing the MALDI-MS detection.

FeOOH@Metal-Organic Framework Core-Satellite Nanocomposites for the Serum Metabolic Fingerprinting of Gynecological Cancers

High-throughput metabolic analysis is of significance in diagnostics, while tedious sample pretreatment has largely hindered its clinic application. Herein, we designed FeOOH@ZIF-8 composites with enhanced ionization efficiency and size-exclusion effect for laser desorption/ionization mass spectrometry (LDI-MS)-based metabolic diagnosis of gynecological cancers. The FeOOH@ZIF-8-assisted LDI-MS achieved rapid, sensitive, and selective metabolic fingerprints of the native serum without any enrichment or purification. Further analysis of extracted serum metabolic fingerprints successfully discriminated patients with gynecological cancers (GCs) from healthy controls and also differentiated three major subtypes of GCs. Given the low cost, high-throughput, and easy operation, our approach brings a new dimension to disease analysis and classification.

Synergistic Effect of Metal-Organic Framework/Gallic Acid in Enhanced Laser Desorption/Ionization Mass Spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become an indispensable tool for high-throughput analysis of macromolecules, but many challenges still remain in detection of small molecules due to the severe matrix-related background interference in the low-molecular-weight ranges (MW < 700 Da). Herein, a gallic acid (GA)-functionalized zirconium 1,4-dicarboxybenzene metal-organic framework (MOF) (denoted as UiO-66-GA) was designed to serve as a new substrate, and a novel strategy on the basis of the synergistic effect of MOF and GA was developed to enhance the LDI process. In comparison with conventional organic matrices, the UiO-66-GA substrate showed superior LDI performance in the analysis of a wide variety of molecules including amino acids, unsaturated fatty acids, bisphenols (BPs), oligosaccharides, peptides, protein, and polyethylene glycol (PEG) of various average molecular weights from 200 to 10000. Perfluorooctanoic sulfonate (PFOS) was used to evaluate the ability of quantitative analysis, and its corresponding limit of detection as low as 1 fmol was achieved. High sensitivity and good salt tolerance of the UiO-66-GA-assisted LDI-MS were allowed to determine ultratrace PFOS in the spiked human urine and serum samples. In addition, the synergistic mechanism of MOF and GA in the enhanced LDI process was investigated by comprehensively comparing GA- and its analogue-functionalized UiO-66, and the results revealed that two aspects contributed to the enhanced LDI process: (1) an enhancement in the metal-phenolic coordination system of UiO-66-GA promoted laser absorption and energy transfer; (2) introduction of carboxyl and hydroxyl groups of GA onto UiO-66 facilitated the LDI process in both positive and negative ion modes. This work expands a new domain for the MOF applications and provides a promising alternative for various molecule analyses.

Increasing Alkyl Chain Length in a Series of Layered Metal-Organic Frameworks Aids Ultrasonic Exfoliation to Form Nanosheets

Metal–organic framework nanosheets (MONs) are attracting increasing attention as a diverse class of two-dimensional materials derived from metal–organic frameworks (MOFs). The principles behind the design of layered MOFs that can readily be exfoliated to form nanosheets, however, remain poorly understood. Here we systematically investigate an isoreticular series of layered MOFs functionalized with alkoxy substituents in order to understand the effect of substituent alkyl chain length on the structure and properties of the resulting nanosheets. A series of 2,5-alkoxybenzene-1,4-dicarboxylate ligands (O₂CC₆H₂(OR)₂CO₂, R = methyl–pentyl, 1–5, respectively) was used to synthesize copper paddle-wheel MOFs. Rietveld and Pawley fitting of powder diffraction patterns for compounds Cu(3–5)(DMF) showed they adopt an isoreticular series with two-dimensional connectivity in which the interlayer distance increases from 8.68 Å (R = propyl) to 10.03 Å (R = pentyl). Adsorption of CO₂ by the MOFs was found to increase from 27.2 to 40.2 cm³ g^–1 with increasing chain length, which we attribute to the increasing accessible volume associated with increasing unit-cell volume. Ultrasound was used to exfoliate the layered MOFs to form MONs, with shorter alkyl chains resulting in higher concentrations of exfoliated material in suspension. The average height of MONs was investigated by AFM and found to decrease from 35 ± 26 to 20 ± 12 nm with increasing chain length, with the thinnest MONs observed being only 5 nm, corresponding to five framework layers. These results indicate that careful choice of ligand functionalities can be used to tune nanosheet structure and properties, enabling optimization for a variety of applications.

A series of layered copper metal−organic frameworks (MOFs) were synthesized, utilizing benzene-1,4-dicarboxylates difunctionalized in the 2,5-positions with alkoxy pendent chains (methoxy-pentoxy) as the organic ligands. Increasing the chain length from propoxy to pentoxy increased the interlayer distance, resulted in increased CO₂ uptake, and aided the ultrasonic exfoliation of these MOFs to form nanosheets, producing MONs down to just 5 nm thick.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Untwisted restacking of two-dimensional metal-organic framework nanosheets for highly selective isomer separations

The stacking between nanosheets is an intriguing and inevitable phenomenon in the chemistry of nano-interfaces. Two-dimensional metal-organic framework nanosheets are an emerging type of nanosheets with ultrathin and porous features, which have high potential in separation applications. Here, the stacking between single-layer metal-organic framework nanosheets is revealed to show three representative conformations with tilted angles of 8°, 14°, and 30° for Zr-1, 3, 5-(4-carboxylphenyl)-benzene framework as an example. Efficient untwisted stacking strategy by simple heating is proposed. A detailed structural analysis of stacking modes reveals the creation of highly ordered sub-nanometer micropores in the interspacing of untwisted nano-layers, yielding a high-resolution separator for the pair of para-/meta-isomers over the twisted counterparts and commercial HP-5MS and VF-WAXMS columns. This general method is proven by additional nanosheet examples and supported by Grand Canonical Monte Carlo simulation. This finding will provide a synthetic route in the rational design of functionalities in two-dimensional metal-organic framework nanosheet.

Metal-organic framework nanosheets are promising for separations, but interactions among them, affecting the performance, are largely unexplored. The authors reveal the favored stacking modes in a model system, and that untwisted restacking by thermal treatment improves isomer separation performance in gas chromatography capillary columns.

Metal–Organic Frameworks (MOFs) as Potential Hybrid Ferroelectric Materials

This chapter presents new findings of intrinsic and induced ferroelectricity in Metal–Organic Frameworks (MOFs) with a polar system, capable of forming an electronic structure in an asymmetric lattice. Multiple experimental techniques and simulation methods are reviewed in detail. The characteristics of ferroelectrics such as discontinuity in temperature-dependent dielectric constant, polarization hysteresis loops, etc. have been observed from several MOF large crystals and crystalline powders. A relationship between polarization and bond polarity for MOFs has been established. In addition, we emphasize the significance of mechanical strength of MOFs in real applications. This chapter reviews MOF materials for energy storage and utilization, aiming to provide an insight into the design of novel MOF-based ferroelectrics.

A flexible and multifunctional metal–organic framework as a matrix for analysis of small molecules using laser desorption/ionization mass spectrometry

Fast screening of multi-functional MOFs as SALDI-MS matrices for the detection of small molecules and simultaneous enrichment and detection of analytes.

Two-dimensional TiO2 nanoflakes enable rapid SALDI-TOF-MS detection of toxic small molecules (dyes and their metabolites) in complex environments

High surface area (136 m² g^-1) nanoporous two-dimensional TiO₂ nanoflakes are applied as an adsorbent and meanwhile a matrix for toxic small molecule analysis using positive-ion surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS). The TiO₂ nanoflakes enable one-step enrichment and analysis, greatly simplifying the analysis technique. Due to the high enrichment efficiency and low background noise, small molecule organic contaminants at ppt or even sub-ppt concentrations such as malachite green (10 pg/mL), leucomalachite green (10 pg/mL), cetyltrimethylammonium bromide (0.001 pg/mL), rhodamine B (0.001 pg/mL), and crystal violet (0.1 pg/mL) were detected. In addition, malachite green and its metabolite leucomalachite green at ng/mL concentrations were successfully detected from fish blood and fish extracts, and crystal violet and its homologues at ng/cm² concentrations were detected from inks on thermal receipt papers obtained from local supermarket.

Two-dimensional porous cuprous oxide nanoplatelets derived from metal-organic frameworks (MOFs) for efficient photocatalytic dye degradation under visible light

Bottom-up synthesis is a promising method to design and control the morphology of metal-organic frameworks (MOFs). Here, square shaped two-dimensional (2D) MOF nanoplatelets with a thickness of ∼80 nm and a lateral dimension of 4-6 μm were successfully synthesized through a facile solvothermal treatment of Cu(NO3)2 and 4,4'-bipyridine in the presence of polyvinyl pyrrolidone (PVP). The growth of a cross-weaved structure assembled via 1D chains linked with 4,4'-bipyridine along the layer stacking direction was hindered by PVP, resulting in a high-aspect ratio of the nanoplatelets. Subsequent annealing treatment converted the Cu-based MOFs into porous N-doped Cu2O/carbon composites, retaining the 2D square morphology. This annealed product showed a higher performance in the degradation of methyl orange under visible light compared to previously reported Cu2O composites. By using a small amount of the catalyst, the degradation rate could reach up to 2.5 mg min-1 gcat-1 as a result of the efficient absorption of visible light and high surface area of the porous catalysts.

Coordination nanosheets (CONASHs): strategies, structures and functions

Nanosheets, which are two-dimensional polymeric materials, remain among the most actively researched areas of chemistry and physics this decade. Generally, nanosheets are inorganic materials created from bulk crystalline layered materials and have fascinating properties and functionalities. An emerging alternative is molecule-based nanosheets containing organic molecular components. Molecule-based nanosheets offer great diversity because their molecular, ionic, and atomic constituents can be selected and combined to produce a wide variety of nanosheets. The present article focuses on coordination nanosheets (CONASHs), a class of molecule-based nanosheets comprising organic ligand molecules and metal ions/atoms in a framework linked with coordination bonds. Following the Introduction, Section 2 describes CONASHs, including their definition, design, synthetic procedures, and characterisation techniques. Section 3 introduces various examples of CONASHs, and Section 4 explores their functionality and possible applications. Section 5 describes an outlook for the research field of CONASHs.

Two-dimensional metal–organic framework nanosheets: synthesis and applications

Synthesis and applications of two-dimensional metal–organic framework nanosheets and their composites are summarized.

Study of Adsorption and Desorption Performances of Zr-Based Metal-Organic Frameworks Using Paper Spray Mass Spectrometry

The dynamic pore systems and high surface areas of flexible metal-organic framework materials make them excellent candidates to be used in different kinds of adsorption processes. However, the adsorption and desorption behaviors of therapeutic drugs on metal-organic frameworks in solution are not fully developed. Here, we systematically investigated the adsorption and desorption behaviors of a typical therapeutic drug, verapamil, over several Zr-based metal-organic frameworks [e.g., Zr-FUM, UiO-66(Zr), UiO-66(Zr)-NH₂ and UiO-66(Zr)-2COOH] as well as ZrO₂ in an acetonitrile solution by using paper spray mass spectrometry. In contrast to other materials, UiO-66(Zr)-2COOH demonstrated a superior adsorption performance to verapamil due to their strong acid-base and/or hydrogen-bond interactions, and the adsorption process fitted well with the pseudo-second-order kinetic model. As verapamil-adsorbed materials were used for desorption experiments, ZrO₂ demonstrated the most favorable desorption performance, whereas UiO-66(Zr)-2COOH yielded the poorest desorption capability. These Zr-based materials had also been coated at the surface with filter papers for the analysis of various drugs and proteins in the process of paper spray mass spectrometry. The results demonstrated that among the studied materials, ZrO₂-coated paper gave the most favorable desorption performance as a pure drug solution, whereas the paper from UiO-66(Zr) demonstrated the optimal capability in the analyses of therapeutic drugs in a complex matrix (e.g., blood) and a protein (e.g., myoglobin).

Nanomaterials as Assisted Matrix of Laser Desorption/Ionization Time-of-Flight Mass Spectrometry for the Analysis of Small Molecules

Matrix-assisted laser desorption/ionization (MALDI), a soft ionization method, coupling with time-of-flight mass spectrometry (TOF MS) has become an indispensible tool for analyzing macromolecules, such as peptides, proteins, nucleic acids and polymers. However, the application of MALDI for the analysis of small molecules (<700 Da) has become the great challenge because of the interference from the conventional matrix in low mass region. To overcome this drawback, more attention has been paid to explore interference-free methods in the past decade. The technique of applying nanomaterials as matrix of laser desorption/ionization (LDI), also called nanomaterial-assisted laser desorption/ionization (nanomaterial-assisted LDI), has attracted considerable attention in the analysis of low-molecular weight compounds in TOF MS. This review mainly summarized the applications of different types of nanomaterials including carbon-based, metal-based and metal-organic frameworks as assisted matrices for LDI in the analysis of small biological molecules, environmental pollutants and other low-molecular weight compounds.

Water-soluble Au nanoclusters for multiplexed mass spectrometry imaging

Homogeneous Au nanoclusters were utilized for enhancing the detection sensitivity and lateral resolution of multiplexed mass spectrometry imaging due to their high ultraviolet adsorption, high water solubility, and high biocompatibility.