Contrasting Ultra-Low Frequency Raman and Infrared Modes in Emerging Metal Halides for Photovoltaics

Lattice dynamics are critical to photovoltaic material performance, governing dynamic disorder, hot-carrier cooling, charge-carrier recombination, and transport. Soft metal-halide perovskites exhibit particularly intriguing dynamics, with Raman spectra exhibiting an unusually broad low-frequency response whose origin is still much debated. Here, we utilize ultra-low frequency Raman and infrared terahertz time-domain spectroscopies to provide a systematic examination of the vibrational response for a wide range of metal-halide semiconductors: FAPbI3, MAPbI x Br3-x , CsPbBr3, PbI2, Cs2AgBiBr6, Cu2AgBiI6, and AgI. We rule out extrinsic defects, octahedral tilting, cation lone pairs, and "liquid-like" Boson peaks as causes of the debated central Raman peak. Instead, we propose that the central Raman response results from an interplay of the significant broadening of Raman-active, low-energy phonon modes that are strongly amplified by a population component from Bose-Einstein statistics toward low frequency. These findings elucidate the complexities of light interactions with low-energy lattice vibrations in soft metal-halide semiconductors emerging for photovoltaic applications.

Lattice Dynamics of Quasi-2D Perovskites from First Principles

We present the vibrational properties and phonon dispersion for quasi-2D hybrid organic-inorganic perovskites (BA)2CsPb2I7, (HA)2CsPb2I7, (BA)2(MA)Pb2I7, and (HA)2(MA)Pb2I7 calculated from first principles. Given the highly complex nature of these compounds, we first perform careful benchmarking and convergence testing to identify suitable parameters to describe their structural features and vibrational properties. We find that the inclusion of van der Waals corrections on top of generalized gradient approximation (GGA) exchange-correlation functionals provides the best agreement for the equilibrium structure relative to experimental data. We also investigate the impact of the molecular orientation on the equilibrium structure of these layered perovskite systems. Our results suggest ground state ferroelectric alignment of molecular dipoles in the out-of-plane direction is unlikely and support the assignment of the centrosymmetric space group for the low-temperature phase of (HA)2(MA)Pb2I7. Finally, we compute vibrational properties under the harmonic approximation. We find that stringent energy cut-offs are required to obtain well-converged phonon properties, and once converged, the harmonic approximation can capture key physics for such a large, hybrid inorganic-organic system with vastly different atom types, masses, and interatomic interactions. We discuss the obtained phonon modes and dispersion behavior in the context of known properties for bulk 3D perovskites and ligand molecular crystals. While many vibrational properties are inherited from the parent systems, we also observe unique coupled vibrations that cannot be associated with vibrations of the pure constituent perovskite and ligand subphases. Energy dispersion of the low energy phonon branches primarily occurs in the in-plane direction and within the perovskite subphase and arises from bending and breathing modes of the equatorial Pb-I network within the perovskite octahedral plane. The analysis herein provides the foundation for future investigations on this class of materials, such as exciton-phonon coupling, phase transitions, and general temperature-dependent properties.

Surface-binding molecular multipods strengthen the halide perovskite lattice and boost luminescence

Reducing the size of perovskite crystals to confine excitons and passivating surface defects has fueled a significant advance in the luminescence efficiency of perovskite light-emitting diodes (LEDs). However, the persistent gap between the optical limit of electroluminescence efficiency and the photoluminescence efficiency of colloidal perovskite nanocrystals (PeNCs) suggests that defect passivation alone is not sufficient to achieve highly efficient colloidal PeNC-LEDs. Here, we present a materials approach to controlling the dynamic nature of the perovskite surface. Our experimental and theoretical studies reveal that conjugated molecular multipods (CMMs) adsorb onto the perovskite surface by multipodal hydrogen bonding and van der Waals interactions, strengthening the near-surface perovskite lattice and reducing ionic fluctuations which are related to nonradiative recombination. The CMM treatment strengthens the perovskite lattice and suppresses its dynamic disorder, resulting in a near-unity photoluminescence quantum yield of PeNC films and a high external quantum efficiency (26.1%) of PeNC-LED with pure green emission that matches the Rec.2020 color standard for next-generation vivid displays.

Large dynamic scissoring mode displacements coupled to band gap opening in the cubic phase of the methylammonium lead halide perovskites

Hybrid perovskites are a rapidly growing research area, having reached photovoltaic power conversion efficiencies of over 25%. There is a increasing consensus that the structures of these materials, and hence their electronic structures, cannot be understood purely from the time and space averaged crystal structures observable by conventional methods. We apply a symmetry-motivated analysis method to analyse x-ray pair distribution function data of the cubic phases of the hybrid perovskites MAPbX3(X= I, Br, Cl). We demonstrate that, even in the cubic phase, the local structure of the inorganic components of MAPbX3(X= I, Br, Cl), are dominated by scissoring type deformations of the PbX6octahedra. We find these modes to have a larger amplitude than equivalent distortions in theA-site deficient perovskite ScF3and demonstrate that they show a significant departure from the harmonic approximation. Calculations performed on an inorganic perovskite analogue, FrPbBr3, show that the large amplitudes of the scissoring modes are coupled to a dynamic opening of the electronic band gap. Finally, we use density functional theory calculations to show that the organic MA cations reorientate to accommodate the large amplitude scissoring modes.

Cost-Effective Synthesis Method: Toxic Solvent-Free Approach for Stable Mixed Cation Perovskite Powders in Photovoltaic Applications

Organometallic lead halide perovskite powders have gained widespread attention for their intriguing properties, showcasing remarkable performance in the optoelectronic applications. In this study, formamidinium lead iodide (α-FAPbI3) microcrystals (MCs) is synthesized using retrograde solubility-driven crystallization. Additionally, methylammonium lead bromide (MAPbBr3) and cesium lead iodide (δ-CsPbI3) MCs are prepared through a sonochemical process, employing low-grade PbX2 (X = I & Br) precursors and an eco-friendly green solvent (γ-Valerolactone). The study encompasses an analysis of the structural, optical, thermal, elemental, and morphological characteristics of FAPbI3, MAPbBr3, and CsPbI3 MCs. Upon analysing phase stability, a phase transition in FAPbI3 MCs is observed after 2 weeks. To address this issue, a powder-based mechanochemical method is employed to synthesize stable mixed cation perovskite powders (MCPs) by subjecting FAPbI3 and MAPbBr3 MCs with varying concentrations of CsPbI3. Furthermore, the performance of mixed cation perovskites are examined using the Solar Cell Capacitance Simulator (SCAPS-1D) software. The impact of cesium incorporation in the photovoltaic characteristics is elucidated. All mixed cation absorbers exhibited optimal device performance with a thickness ranging between 0.6-1.5 µm. It's worth noting that the MCPs exhibit impressive ambient stability, remaining structurally intact and retaining their properties without significant degradation for 70 days of ambient exposure.

The Effect of Cesium Incorporation on the Vibrational and Elastic Properties of Methylammonium Lead Chloride Perovskite Single Crystals

Hybrid organic-inorganic lead halide perovskites (LHPs) have emerged as a highly significant class of materials due to their tunable and adaptable properties, which make them suitable for a wide range of applications. One of the strategies for tuning and optimizing LHP-based devices is the substitution of cations and/or anions in LHPs. The impact of Cs substitution at the A site on the structural, vibrational, and elastic properties of MAxCs1-xPbCl3-mixed single crystals was investigated using X-ray diffraction (XRD) and Raman and Brillouin light scattering techniques. The XRD results confirmed the successful synthesis of impurity-free single crystals, which exhibited a phase coexistence of dominant cubic and minor orthorhombic symmetries. Raman spectroscopy was used to analyze the vibrational modes associated with the PbCl6 octahedra and the A-site cation movements, thereby revealing the influence of cesium incorporation on the lattice dynamics. Brillouin spectroscopy was employed to investigate the changes in elastic properties resulting from the Cs substitution. The incorporation of Cs cations induced lattice distortions within the inorganic framework, disrupting the hydrogen bonding between the MA cations and PbCl6 octahedra, which in turn affected the elastic constants and the sound velocities. The substitution of the MA cations with smaller Cs cations resulted in a stiffer lattice structure, with the two elastic constants increasing up to a Cs content of 30%. The current findings facilitate a fundamental understanding of mixed lead chloride perovskite materials, providing valuable insights into their structural and vibrational properties.

Excited-State Dynamics of MAPbBr3: Coexistence of Excitons and Free Charge Carriers at Ultrafast Times

Methylammonium lead tribromide perovskite (MAPbBr3) is an important material, for example, for light-emitting applications and tandem solar cells. The relevant photophysical properties are governed by a plethora of phenomena resulting from the complex and relatively poorly understood interplay of excitons and free charge carriers in the excited state. In this study, we combine transient spectroscopies in the visible and terahertz range to investigate the presence and evolution of excitons and free charge carriers at ultrafast times upon excitation at various photon energies and densities. For above- and resonant band-gap excitation, we find that free charges and excitons coexist and that both are mainly promptly generated within our 50-100 fs experimental time resolution. However, the exciton-to-free charge ratio increases upon decreasing the phonon energy toward resonant band gap excitation. The free charge signatures dominate the transient absorption response for above-band-gap excitation and low excitation densities, masking the excitonic features. With resonant band gap excitation and low excitation densities, we find that although the exciton density increases, free charges remain. We show evidence that the excitons localize into shallow trap and/or Urbach tail states to form localized excitons (within tens of picoseconds) that subsequently get detrapped. Using high excitation densities, we demonstrate that many-body interactions become pronounced and effects such as the Moss-Burstein shift, band gap renormalization, excitonic repulsion, and the formation of Mahan excitons are evident. The coexistence of excitons and free charges that we demonstrate here for photoexcited MAPbBr3 at ultrafast time scales confirms the high potential of the material for both light-emitting diode and tandem solar cell applications.

Phonon Properties and Lattice Dynamics of Two- and Tri-Layered Lead Iodide Perovskites Comprising Butylammonium and Methylammonium Cations-Temperature-Dependent Raman Studies

Hybrid lead iodide perovskites are promising photovoltaic and light-emitting materials. Extant literature data on the key optoelectronic and luminescent properties of hybrid perovskites indicate that these properties are affected by electron-phonon coupling, the dynamics of the organic cations, and the degree of lattice distortion. We report temperature-dependent Raman studies of BA2MAPb2I7 and BA2MA2Pb3I10 (BA = butylammonium; MA = methylammonium), which undergo two structural phase transitions. Raman data obtained in broad temperature (360-80 K) and wavenumber (1800-10 cm-1) ranges show that ordering of BA+ cations triggers the higher temperature phase transition, whereas freezing of MA+ dynamics occurs below 200 K, leading to the onset of the low-temperature phase transition. This ordering is associated with significant deformation of the inorganic sublattice, as evidenced by changes observed in the lattice mode region. Our results show, therefore, that Raman spectroscopy is a very valuable tool for monitoring the separate dynamics of different organic cations in perovskites, comprising "perovskitizer" and interlayer cations.

Exploring the Influence of Cation and Halide Substitution in the Structure and Optical Properties of CH3NH3NiCl3 Perovskite

This manuscript details a comprehensive investigation into the synthesis, structural characterization, thermal stability, and optical properties of nickel-containing hybrid perovskites, namely CH3NH3NiCl3, CsNiCl3, and CH3NH3NiBrCl2. The focal point of this study is to unravel the intricate crystal structures, thermal behaviors, and optical characteristics of these materials, thereby elucidating their potential application in energy conversion and storage technologies. X-ray powder diffraction measurements confirm that CH3NH3NiCl3 adopts a crystal structure within the Cmcm space group, while CsNiCl3 is organized in the P63/mmc space group, as reported previously. Such structural diversity underscores the complex nature of these perovskites and their potential for tailored applications. Thermal analysis further reveals the stability of CH3NH3NiCl3 and CH3NH3NiBrCl2, which begin to decompose at 260 °C and 295 °C, respectively. The optical absorption properties of these perovskites studied by UV-VIS-NIR spectroscopy revealed the bands characteristic of Ni2+ ions in an octahedral environment. Notably, these absorption bands exhibit subtle shifts upon bromide substitution, suggesting that optical properties can be finely tuned through halide modification. Such tunability is paramount for the design and development of materials with specific optical requirements. By offering a detailed examination of these properties, the study lays the groundwork for future advancements in material science, particularly in the development of innovative materials for sustainable energy technologies.

Impact of large A-site cations on electron-vibrational interactions in 2D halide perovskites: Ab initio quantum dynamics

Using ab initio nonadiabatic molecular dynamics, we study the effect of large A-site cations on nonradiative electron-hole recombination in two-dimensional Ruddlesden-Popper perovskites HA2APb2I7, HA = n-hexylammonium, A = methylammonium (MA), or guanidinium (GA). The steric hindrance created by large GA cations distorts and stiffens the inorganic Pb-I lattice, reduces thermal structural fluctuations, and maintains the delocalization of electrons and holes at ambient and elevated temperatures. The delocalized charges interact more strongly in the GA system than in the MA system, and the charge recombination is accelerated. In contrast, replacement of only some MA cations with GA enhances disorder and increases charge lifetime, as seen in three-dimensional perovskites. This study highlights the key influence of structural fluctuations and disorder on the properties of charge carriers in metal halide perovskites, providing guidance for tuning materials' optoelectronic performance.

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Unveiling the Dual Role of Humidity: The Interplay with Defects Manipulating the Charge Carrier Lifetime in Metal Halide Perovskites

Humidity has exhibited experimentally either beneficial or detrimental effects on the charge carrier lifetime of CH3NH3PbI3 perovskites, leaving the mechanism unresolved. By using ab initio nonadiabatic molecular dynamics simulations, we unveil the dual role of humidity stemming from the complex interplay between water and defects. Beneficially, water passivates iodine vacancies (VI) or grain boundaries (GBs), mitigating electron trapping by reducing nonadiabatic coupling and delaying charge recombination. However, when VI and GBs coexist, water molecules make the two unsaturated lead atoms approach closer and exacerbate electron trapping by deepening the Pb-dimer electron trap that was created by the VI defect, shortening the carrier lifetime to half of pristine CH3NH3PbI3. The study uncovers the origin of the positive and negative effects of humidity on the charge carrier lifetime of perovskites and offers strategies for improving perovskite devices, particularly by avoiding simultaneous point defects and GBs.

Atomic Structure and Dynamics of Organic-Inorganic Hybrid Perovskite Formamidinium Lead Iodide

The atomic dynamic behaviors of formamidinium lead iodide [HC(NH2)2PbI3] are critical for understanding and improving photovoltaic performances. However, they remain unclear. Here, we investigate the structural phase transitions and the reorientation dynamics of the formamidinium cation [HC(NH2)2+, FA+] of FAPbI3 using neutron scattering techniques. Two structural phase transitions occur with decreasing temperature, from cubic to tetragonal phase at 285 K and then to another tetragonal at 140 K, accompanied by gradually frozen reorientation of FA cations. The nearly isotropic reorientation in the cubic phase is suppressed to reorientation motions involving a two-fold (C2) rotation along the N···N axis and a four-fold (C4) rotation along the C-H axis in the tetragonal phase, and eventually to local disordered motion as a partial C4 along the C-H axis in another tetragonal phase, thereby indicating an intimate interplay between lattice and orientation degrees of freedom in the hybrid perovskite materials. The present complete atomic structure and dynamics provide a solid standing point to understand and then improve photovoltaic properties of organic-inorganic hybrid perovskites in the future.

Ultrafast vibrational control of organohalide perovskite optoelectronic devices using vibrationally promoted electronic resonance

Vibrational control (VC) of photochemistry through the optical stimulation of structural dynamics is a nascent concept only recently demonstrated for model molecules in solution. Extending VC to state-of-the-art materials may lead to new applications and improved performance for optoelectronic devices. Metal halide perovskites are promising targets for VC due to their mechanical softness and the rich array of vibrational motions of both their inorganic and organic sublattices. Here, we demonstrate the ultrafast VC of FAPbBr3 perovskite solar cells via intramolecular vibrations of the formamidinium cation using spectroscopic techniques based on vibrationally promoted electronic resonance. The observed short (~300 fs) time window of VC highlights the fast dynamics of coupling between the cation and inorganic sublattice. First-principles modelling reveals that this coupling is mediated by hydrogen bonds that modulate both lead halide lattice and electronic states. Cation dynamics modulating this coupling may suppress non-radiative recombination in perovskites, leading to photovoltaics with reduced voltage losses.

Phase Transitions, Dielectric Response, and Nonlinear Optical Properties of Aziridinium Lead Halide Perovskites

Hybrid organic-inorganic lead halide perovskites are promising candidates for next-generation solar cells, light-emitting diodes, photodetectors, and lasers. The structural, dynamic, and phase-transition properties play a key role in the performance of these materials. In this work, we use a multitechnique experimental (thermal, X-ray diffraction, Raman scattering, dielectric, nonlinear optical) and theoretical (machine-learning force field) approach to map the phase diagrams and obtain information on molecular dynamics and mechanism of the structural phase transitions in novel 3D AZRPbX3 perovskites (AZR = aziridinium; X = Cl, Br, I). Our work reveals that all perovskites undergo order-disorder phase transitions at low temperatures, which significantly affect the structural, dielectric, phonon, and nonlinear optical properties of these compounds. The desirable cubic phases of AZRPbX3 remain stable at lower temperatures (132, 145, and 162 K for I, Br, and Cl) compared to the methylammonium and formamidinium analogues. Similar to other 3D-connected hybrid perovskites, the dielectric response reveals a rather high dielectric permittivity, an important feature for defect tolerance. We further show that AZRPbBr3 and AZRPbI3 exhibit strong nonlinear optical absorption. The high two-photon brightness of AZRPbI3 emission stands out among lead perovskites emitting in the near-infrared region.

Excitons in metal halide perovskite nanoplatelets: an effective mass description of polaronic, dielectric and quantum confinement effects

A theoretical model for excitons confined in metal halide perovskite nanoplatelets is presented. The model accounts for quantum confinement, dielectric confinement, short and long range polaron interactions by means of effective mass theory, image charges and Haken potentials. We use it to describe the band edge exciton of MAPbI3 structures surrounded by organic ligands. It is shown that the quasi-2D quantum and dielectric confinement squeezes the exciton radius, and this in turn enhances short-range polaron effects as compared to 3D structures. Dielectric screening is then weaker than expected from the static dielectric constant. This boosts the binding energies and radiative recombination probabilities, which is a requisite to match experimental data in related systems. The thickness dependence of Coulomb polarization and self-energy potentials is in fair agreement with sophisticated atomistic models.

Synthesis, Characterization, and Photoelectric and Electrochemical Behavior of (CH3NH3)2Zn1-xCoxBr4 Perovskites

We report the synthesis, characterization, and photoelectric and electrochemical properties of (CH3NH3)2Zn1-xCoxBr4 (x = 0.0, 0.3, 0.5, 0.7, and 1.0) samples. X-ray powder and single-crystal diffraction confirm the formation of solid solution across the entire range. Additionally, as the cobalt concentration increases, the crystallinity of the samples decreases, as indicated by the powder diffraction patterns. All samples remain stable up to 560 K, beyond which they decompose into CH3NH3Br and the respective bromide. The semiconductor behavior of the compounds is confirmed through optical absorption measurements, and band gap values are determined by using the Tauc method from diffuse reflectance spectra. Raman spectroscopy reveals a slight redshift in all vibration modes with increasing cobalt content. Finally, photovoltaic measurements on solar cells constructed with (MA)2CoBr4 perovskite exhibit modest performance, and electrochemical measurements indicate that the compound with the composition (MA)2Zn0.3Co0.7Br4 exhibits the highest current for electrochemical water reduction during oxygen evolution.

Phase transformations and vibrational properties of hybrid organic-inorganic perovskite MAPbI3 bulk at high pressure

The structural stability and internal properties of hybrid organic-inorganic perovskites (HOIPs) have been widely investigated over the past few years. The interplay between organic cations and inorganic framework is one of the prominent features. Herein we report the evolution of Raman modes under pressure in the hybrid organic-inorganic perovskite MAPbI[Formula: see text] by combining the experimental approach with the first-principles calculations. A bulk MAPbI[Formula: see text] single crystal was synthesized via inverse temperature crystallization (ITC) technique and characterized by Raman spectroscopy, while the diamond anvil cells (DACs) was employed to compress the sample. The classification and behaviours of their Raman modes are presented. At ambient pressure, the vibrations of inorganic PbI[Formula: see text] octahedra and organic MA dominate at a low-frequency range (60-760 cm[Formula: see text]) and a fingerprint range (900-1500 cm[Formula: see text]), respectively. The applied pressure exhibits two significant changes in the Raman spectrum and indicates of phase transition. The results obtained from both experiment and calculations of the second phase at 3.26 GPa reveal that the internal vibration intensity of the PbI[Formula: see text] octahedra (< 110 cm[Formula: see text]) reduces as absences of MA libration (150-270 cm[Formula: see text]) and internal vibration of MA (450-750 cm[Formula: see text]). Furthermore, the hydrogen interactions around 1300 cm[Formula: see text] remain strong high pressure up to 5.34 GPa.

Thermal Transport Properties of Phonons in Halide Perovskites

Halide perovskites have emerged as promising candidates for various applications, such as photovoltaic, optoelectronic and thermoelectric applications. The knowledge of the thermal transport of halide perovskites is essential for enhancing the device performance for these applications and improving the understanding of heat transport in complicated material systems with atomic disorders. In this work, the current understanding of the experimentally and theoretically obtained thermal transport properties of halide perovskites is reviewed. This study comprehensively examines the reported thermal conductivity of methylammonium lead iodide, which is a prototype material, and provides theoretical frameworks for its lattice vibrational properties. The frameworks and discussions are extended to other halide perovskites and derivative structures. The implications for device applications, such as solar cells and thermoelectrics, are discussed.

Spontaneous Polarization Induced Optical Responses in a Two-Dimensional Ferroelectric Halide Perovskite

Two-dimensional (2D) halide perovskites exhibit unique structural and optical properties because large organic molecular cations distort the perovskite structure and the excitons confined in the 2D layers are stable. Here, we report the temperature dependences of the absorption spectra, second harmonic generation (SHG) intensity, and lattice constants of 2D perovskite (BA)2(EA)2Pb3I10 single crystals, where BA is n-butylammonium and EA is ethylammonium. We found that the Urbach tail of the absorption spectrum significantly changes at around 200 K and that the change is correlated with the SHG intensity and the in-plane lattice distortion. We concluded that a random distribution of spontaneous polarizations in the ferroelectric phase modifies the linewidth of the band-edge exciton transition and is the cause of the anomalous temperature dependence of the steepness parameter of the Urbach tail.

Large Phase-Transition Temperature Enhancement Achieved in a Layered Lead Iodide Hybrid Crystal by H/F Substitution

Organic-inorganic hybrid metal halides with structural flexibility and solution processability have been widely investigated for different application scenarios. However, the effective construction of phase-transition materials with a high phase-transition temperature (Ttr) for potential practical applications remains a great challenge, and reports on the regulation of Ttr with significant enhancement have been rare. In this manuscript, we have realized a large Ttr increase of 148 K in a layered hybrid lead iodide crystal (4-FTMBA)4Pb3I10 (4-FTMBA = 4-fluoro-N,N,N-trimethylbenzenaminium) by the H/F substitution strategy. Compared to the parent (TMBA)4Pb3I10 (TMBA = N,N,N-trimethylbenzenaminium), H/F substitution preserves the structural framework and crystal symmetry in (4-FTMBA)4Pb3I10. The introduction of heavier fluorine will significantly increase the motion barrier for the order-disorder transition, resulting in the remarkably improved Ttr. Temperature-dependent crystal structures, Raman spectra, and dielectric analyses well support the phase-transition behavior. In addition, evident thermochromism with a tunable direct band gap in (4-FTMBA)4Pb3I10 has been observed using UV-vis spectra. To the best of our knowledge, the achieved Ttr enhancement of 148 K by H/F substitution is the highest among the organic-inorganic hybrid lead halide phase-transition materials. This finding would greatly inspire the rational design of functional materials with high performance.

Great Influence of Pressure and Isotope Effects on Nonradiative Charge Loss in Hybrid Organic-Inorganic Perovskites

The intrinsic softness of hybrid organic-inorganic perovskites (HOIPs) allows their lattice and optoelectronic performance to be tunable to external pressure. Using nonadiabatic (NA) molecular dynamics, we demonstrate that a mild pressure accelerates hot electron relaxation and suppresses nonradiative electron-hole recombination in CH3NH3PbI3. Both processes are governed by NA coupling, which is enhanced between the electronic states of the quasi-continuous bands while is decreased between the band-edge states by reducing the electron-hole wave function overlap. Hydrogen/deuterium isotope exchange alleviates the pressure-induced NA coupling by increasing lattice rigidity and decreasing wave function overlap, slowing down both the hot electron relaxation and electron-hole recombination processes. The simulated time scales of sub-3 ps for hot electron relaxation and half nanoseconds for recombination agree well with the experiments. The study suggests that the isotope exchange can mitigate the pressure-caused fast losses of hot electrons and further prolong the charge carrier lifetime in HOIPs.

Using pressure to unravel the structure-dynamic-disorder relationship in metal halide perovskites

The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of temperature, pressure and composition. The application of high hydrostatic pressure allows for unraveling the nature of the interaction between both sublattices, characterized by the simultaneous action of hydrogen bonding and steric hindrance. In particular, we find that under the conditions of unleashed cation dynamics, the key factor that determines the structural stability of MHPs is the repulsive steric interaction rather than hydrogen bonding. Taking as example the results from pressure and temperature-dependent photoluminescence and Raman experiments on MAPbBr[Formula: see text] but also considering the pertinent MHP literature, we provide a general picture about the relationship between the crystal structure and the presence or absence of cationic dynamic disorder. The reason for the structural sequences observed in MHPs with increasing temperature, pressure, A-site cation size or decreasing halide ionic radius is found principally in the strengthening of the dynamic steric interaction with the increase of the dynamic disorder. In this way, we have deepened our fundamental understanding of MHPs; knowledge that could be coined to improve performance in future optoelectronic devices based on this promising class of semiconductors.

Influence of Halides on Elastic and Vibrational Properties of Mixed-Halide Perovskite Systems Studied by Brillouin and Raman Scattering

The relationship between halogen content and the elastic/vibrational properties of MAPbBr_3-xCl_x mixed crystals (x = 1.5, 2, 2.5, and 3) with MA = CH₃NH₃⁺ has been studied using Brillouin and Raman spectroscopy at room temperature. The longitudinal and transverse sound velocities, the absorption coefficients and the two elastic constants C₁₁ and C₄₄ could be obtained and compared for the four mixed-halide perovskites. In particular, the elastic constants of the mixed crystals have been determined for the first time. A quasi-linear increase in the sound velocity and the elastic constant C₁₁ with increasing chlorine content was observed for the longitudinal acoustic waves. C₄₄ was insensitive to the Cl content and very low, indicating a low elasticity to shear stress in mixed perovskites regardless of the Cl content. The acoustic absorption of the LA mode increased with increasing heterogeneity in the mixed system, especially for the intermediate composition where the Br and Cl ratio was 1:1. In addition, a significant decrease in the Raman-mode frequency of the low-frequency lattice modes and the rotational and torsional modes of the MA cations was observed with decreasing Cl content. It clearly showed that the changes in the elastic properties as the halide composition changes were correlated with the lattice vibrations. The present findings may facilitate a deeper understanding of the complex interplay between halogen substitution, vibrational spectra and elastic properties, and may also pave the way for optimizing the operation of perovskite-based photovoltaic and optoelectronic devices by tailoring their chemical composition.

Nonlinear terahertz control of the lead halide perovskite lattice

Lead halide perovskites (LHPs) have emerged as an excellent class of semiconductors for next-generation solar cells and optoelectronic devices. Tailoring physical properties by fine-tuning the lattice structures has been explored in these materials by chemical composition or morphology. Nevertheless, its dynamic counterpart, phonon-driven ultrafast material control, as contemporarily harnessed for oxide perovskites, has not yet been established. Here, we use intense THz electric fields to obtain direct lattice control via nonlinear excitation of coherent octahedral twist modes in hybrid CH₃NH₃PbBr₃ and all-inorganic CsPbBr₃ perovskites. These Raman-active phonons at 0.9 to 1.3 THz are found to govern the ultrafast THz-induced Kerr effect in the low-temperature orthorhombic phase and thus dominate the phonon-modulated polarizability with potential implications for dynamic charge carrier screening beyond the Fröhlich polaron. Our work opens the door to selective control of LHP's vibrational degrees of freedom governing phase transitions and dynamic disorder.

Plurality of excitons in Ruddlesden-Popper metal halides and the role of the B-site metal cation

We investigate the effect of metal cation substition on the excitonic structure and dynamics in a prototypical Ruddlesden-Popper metal halide. Through an in-depth spectroscopic and theoretical analysis, we identify the presence of multiple resonances in the optical spectra of a phenethyl ammonium tin iodide, a tin-based RPMH. Based on ab initio calculations, we assign these resonances to distinct exciton series that originate from the splitting of the conduction band due to spin-orbit coupling. While the splitting energy in the tin based system is low enough to enable the observation of the higher lying exciton in the visible-range spectrum of the material, the higher splitting energy in the lead counterpart prevents the emergence of such a feature. We elucidate the critical role played by the higher lying excitonic state in the ultrafast carrier thermalization dynamics.

Static and Dynamic Disorder in Formamidinium Lead Bromide Single Crystals

We show that formamidinium-based crystals are distinct from methylammonium-based halide perovskite crystals because their inorganic sublattice exhibits intrinsic local static disorder that coexists with a well-defined average crystal structure. Our study combines terahertz-range Raman scattering with single-crystal X-ray diffraction and first-principles calculations to probe the evolution of inorganic sublattice dynamics with temperature in the range of 10-300 K. The temperature evolution of the Raman spectra shows that low-temperature, local static disorder strongly affects the crystal structural dynamics and phase transitions at higher temperatures.

Guest-dependent bond flexibility in UiO-66, a "stable" MOF

We report "flexibility constants"-a conceptual analog to metal-ligand stability constants-of UiO-66, the prototypical "stable" MOF, across a wide temperature range in both vacuum and in the presence of typical guest solvents. With these data, we extract key thermodynamic parameters governing the reversible bond equilibrium and demonstrate that guest molecules strongly favor the reversible dissociation of MOF metal-linker bonds.

Synthesis, Photoluminescence and Vibrational Properties of Aziridinium Lead Halide Perovskites

Three-dimensional lead halide perovskites are known for their excellent optoelectronic properties, making them suitable for photovoltaic and light-emitting applications. Here, we report for the first time the Raman spectra and photoluminescent (PL) properties of recently discovered three-dimensional aziridinium lead halide perovskites (AZPbX₃, X = Cl, Br, I), as well as assignment of vibrational modes. We also report diffuse reflection data, which revealed an extended absorption of light of AZPbX₃ compared to the MA and FA counterparts and are beneficial for solar cell application. We demonstrated that this behavior is correlated with the size of the organic cation, i.e., the energy band gap of the cubic lead halide perovskites decreases with the increasing size of the organic cation. All compounds show intense PL, which weakens on heating and shifts toward higher energies. This PL is red shifted compared to the FA and MA counterparts. An analysis of the PL data revealed the small exciton binding energy of AZPbX₃ compounds (29-56 meV). Overall, the properties of AZPbX₃ are very similar to those of the well-known MAPbX₃ and FAPbX₃ perovskites, indicating that the aziridinium analogues are also attractive materials for light-emitting and solar cell applications.

Synthesis and Properties of Stable Amino Metal Halide Molecular Clusters in the Solid State

Nanosized molecular clusters (MCs) composed of PbBr₂ and neutral ligand butylamine (BTYA) with unique optical properties in solution and solid states have been synthesized using ligand-assisted reprecipitation and spin-coating, separately. The studies of their optical properties using ultraviolet-visible (UV-vis) absorption and photoluminescence (PL) show the first electronic absorption and PL band of the MCs at 401 and 411 nm, respectively, for the solution and solid state samples that exhibit good stability under ambient conditions. Low-temperature PL spectra below 30 K show vibronic peaks indicative of a single size or a very narrow size distribution of the MCs. On the basis of Raman, X-ray diffraction, and transmission electron microscopy measurements, a layered structural model is proposed for the MCs with a BTYA ligand capping on the surface of the corner-shared tilted [PbBr₆]^4- octahedral framework. The stable and retained structure of MCs in the solid state is promising for photonics applications.

Structural Phase Transitions and Thermal Degradation Process of MAPbCl3 Single Crystals Studied by Raman and Brillouin Scattering

Raman spectroscopy was applied to MAPbCl₃ single crystals in a wide frequency range from 10 to 3500 cm^-1 over a broad temperature range from -196 °C to 200 °C including both two structural phase transitions and a thermal degradation range. Low-frequency lattice modes of MAPbCl₃ were revealed for the first time, which showed discontinuous anomalies along with the change in the number of Raman modes at the transition points of -114 °C and -110 °C. Several Raman modes related to the C-N stretching and MA rocking modes in addition to the lattice modes displayed temperature dependences similar to those of MAPbBr₃ in both Raman shifts and half widths, indicating that the MA cation arrangement and H-halide bond interactions behave similarly in both systems during the phase transition. The substantial increase in the half widths of nearly all Raman modes especially suggests that the dynamic disorder caused by the free rotational motions of MA cations induces significant anharmonicity in the lattice and thus, reduces the phonon lifetimes. High-temperature Raman and Brillouin scattering measurements showed that the spectral features changed drastically at ~200 °C where the thermal decomposition of MAPbCl₃ into PbCl₂ began. This result exhibits that combined Raman and Brillouin spectroscopic techniques can be a useful tool in monitoring temperature-induced or temporal changes in lead-based halide perovskite materials.

Direct Observation of Size-Dependent Phase Transition in Methylammonium Lead Bromide Perovskite Microcrystals and Nanocrystals

Methylammonium (MA) lead halide perovskites have been widely studied as active materials for advanced optoelectronics. As crystalline semiconductor materials, their properties are strongly affected by their crystal structure. Depending on their applications, the size of MA lead halide perovskite crystals varies by several orders of magnitude. The particle size can lead to different structural phase transitions and optoelectronic properties. Herein, we investigate the size effect for phase transition of MA lead bromide (MAPbBr₃) by comparing the temperature-dependent neutron powder diffraction patterns of microcrystals and nanocrystals. The orthorhombic-to-tetragonal phase transition occurs in MAPbBr₃ microcrystals within the temperature range from 100 to 310 K. However, the phase transition is absent in nanocrystals in this temperature range. In this work, we offer a persuasive and direct evidence of the relationship between the particle size and the phase transition in perovskite crystals.

The effect of caesium alloying on the ultrafast structural dynamics of hybrid organic-inorganic halide perovskites

Hybrid inorganic-organic perovskites have attracted considerable attention over recent years as promising processable electronic materials. In particular, the rich structural dynamics of these 'soft' materials has become a subject of investigation and debate due to their direct influence on the perovskites' optoelectronic properties. Significant effort has focused on understanding the role and behaviour of the organic cations within the perovskite, as their rotational dynamics may be linked to material stability, heterogeneity and performance in (opto)electronic devices. To this end, we use two-dimensional IR spectroscopy (2DIR) to understand the effect of partial caesium alloying on the rotational dynamics of the methylammonium cation in the archetypal hybrid perovskite CH₃NH₃PbI₃. We find that caesium incorporation primarily inhibits the slower 'reorientational jump' modes of the organic cation, whilst a smaller effect on the fast 'wobbling time' may be due to distortions and rigidisation of the inorganic cuboctahedral cage. 2DIR centre-line-slope analysis further reveals that while static disorder increases with caesium substitution, the dynamic disorder (reflected in the phase memory of the N-H stretching mode of methylammonium) is largely independent of caesium addition. Our results contribute to the development of a unified model of cation dynamics within organohalide perovskites.

Degenerate Lattice-Instability-Driven Amorphization under Compression in Metal Halide Perovskite CsPbI3

Halide perovskites have been intensively investigated for photovoltaic applications because of their good optoelectronic properties and low cost. Various high-pressure experiments have shown that these materials generally undergo reversible phase transitions between different crystalline phases as well as between crystalline and amorphous phases under external pressure. Herein, using first-principles density functional theory (DFT) and ab initio molecular dynamics (AIMD) calculations, we investigate the origin of the pressure-induced amorphization in CsPbI₃. We find that the amorphous-like structures obtained from AIMD calculations become more stable than the orthorhombic Pbnm phase above 6.66 GPa, in good agreement with the experimental value (4.44 GPa). We further find that an imaginary flat band appears in the phonon dispersion of the orthorhombic CsPbI₃ phase across the Brillouin zone at 10 GPa, leading to degenerate lattice instabilities. These energetically degenerate phonon modes are related to PbI₆ octahedral tilting modes and provide random local distortions, leading to amorphization.

Suppression of Phase Transitions in Perovskite Thin Films through Cryogenic Electron Beam Irradiation

Organic-inorganic hybrid perovskites (OIHPs) with superior optoelectronic properties have emerged as revolutionary semiconductor materials for diverse applications. A fundamental understanding of the interplay between the microscopic molecular-level structure and the macroscopic optoelectronic properties is essential to boost device performance toward theoretical limits. Here, we reveal the critical role of CH₃NH₃⁺ (MA) in the regulation of the physicochemical and optoelectronic properties of a MAPbI₃ film irradiated by an electron beam at 130 K. The order-to-disorder transformation of the MA cation not only leads to a notably enhanced photoluminescence emission but also results in the suppression of the orthorhombic phase down to 85 K. Taking advantage of the regulation of MA cation dynamics, we demonstrate a perovskite photodetector with 100% photocurrent enhancement and long-term stability exceeding one month. Our study provides a powerful tool for regulating the optoelectronic properties and stabilities of perovskites and highlights potential opportunities related to the organic cation in OIHPs.

Control of Hot Carrier Cooling in Lead Halide Perovskites by Point Defects

Hot carriers (HCs) in lead halide perovskites are prone to rapidly relax at the band edge and waste plentiful photon energy, severely limiting their conversion efficiency as HC photovoltaic devices. Here, the HC cooling dynamics of MAPbI₃ perovskite with common vacancy point defects (e.g., MA_v⁺ and I_v^-) and an interstitial point defect (e.g., I_i^-) is elucidated, and the underlying physics is explicated using ab initio nonadiabatic molecular dynamics. Contrary to vacancy point defects, the interstitial point defect reduces the band degeneracy, decreases the HC -phonon interaction, weakens the nonadiabatic coupling, and ultimately slows down hot electron cooling by a factor of 1.5-2. Furthermore, the band-by-band relaxation pathway and direct relaxation pathway are uncovered for hot electron cooling and hot hole cooling, respectively, explaining why hot electrons can store more energy than hot holes during the cooling process. Besides, oxygen molecules interacting with I_i^- sharply accelerate the hot electron cooling, making it even faster than that of the pristine system and revealing the detrimental effect of oxygen on HC cooling. This work provides significant insights into the defect-dependent HC cooling dynamics and suggests a new strategy to design high-efficiency HC photovoltaic devices.

Great Influence of Organic Cation Motion on Charge Carrier Dynamics in Metal Halide Perovskite Unraveled by Unsupervised Machine Learning

Unsupervised machine learning combined with time-dependent density functional theory reveals the significant influence of organic cation on the charge carrier lifetime of FAPbI₃ (FA = HC(NH₂)₂⁺) by analyzing their mutual information (MI) between the geometric features and the nonadiabatic coupling (NAC) and bandgap. Analysis of MI values demonstrates that the NAC and bandgap are dominated by the orientation and shape of the inorganic octahedron because iodine and lead atoms are composed of the band edge states. Counterintuitively, the correlated motion promotes the contribution of the FA cation to the NAC; in particular, one type of FA rotation even supersedes the influence of the velocities of the lead and iodine atoms due to the enhanced hydrogen bond interaction. Our study demonstrates the importance of the correlated motion on the excited-state lifetimes of FAPbI₃, which provides a guidance for optimizing the optoelectronic properties of metal halide perovskites.

Anharmonic IR spectra of solvated ammonium and aminium ions: resemblance between water and bisulfate solvations

In this work, we analyze the vibrational spectra of ammonium, methylammonium, and dimethylammonium ions solvated by either water molecules or bisulfate anions using anharmonic vibrational algorithms. Rich and complicated spectral features in the 2700-3200 cm^-1 region of the experimental spectra of these clusters are attributed to originate from strong Fermi resonance between hydrogen-bonded NH stretching fundamentals and NH bending overtones. Additional weaker bands around 2500-2600 cm^-1 in solvated aminium ions are assigned to the combination tones involving the CH-NH (methyl-amino) rocking modes. Furthermore, the qualitative resemblance in band positions and spectral patterns between two-water-solvated and two-bisulfate-solvated cations suggest a common vibrational coupling scheme beneath the two seemingly different micro-solvation environments.

The Ferroelectric-Ferroelastic Debate about Metal Halide Perovskites

Metal halide perovskites (MHPs) are solution-processed materials with exceptional photoconversion efficiencies that have brought a paradigm shift in photovoltaics. The nature of the peculiar optoelectronic properties underlying such astounding performance is still controversial. The existence of ferroelectricity in MHPs and its alleged impact on photovoltaic activity have fueled an intense debate, in which unanimous consensus is still far from being reached. Here we critically review recent experimental and theoretical results with a two-fold objective: we argue that the occurrence of ferroelectric domains is incompatible with the A-site cation dynamics in MHPs and propose an alternative interpretation of the experiments based on the concept of ferroelasticity. We further underline that ferroic behavior in MHPs would not be relevant at room temperature or higher for the physics of photogenerated charge carriers, since it would be overshadowed by competing effects like polaron formation and ion migration.

Changes in the hydrogen nuclear kinetic energy across the several phases of methylammonium lead tribromide

We present an experimental investigation of methylammonium lead tribromide single crystals in the orthorhombic, tetragonal, and cubic phases based on inelastic and deep inelastic neutron scattering experiments. We show how the average hydrogen nuclear kinetic energy, mainly affected by zero-point vibrational energies, shows differences larger compared to the changes simply related to temperature effects when moving from one phase to another. In particular, the Gaussian contribution to the average nuclear kinetic energy is larger in the tetragonal phase compared to the cubic and orthorhombic ones. Moreover, we find that the vibrational densities of states of MAPbBr3 single crystals in the orthorhombic phase are compatible with previously reported results on powder samples, and that the only vibrational modes that show slightly different frequencies compared to MAPbI3 are those in the energy range between 100 and 300 cm-1, related to librational/rotational modes. As these shifts are of about 10 cm-1, and do not affect any higher-energy vibrational mode, we conclude that the zero-point energies and average nuclear kinetic energies in the two-hybrid organic/inorganic perovskites are expected to be approximately the same within a harmonic framework.

Photoinduced large polaron transport and dynamics in organic-inorganic hybrid lead halide perovskite with terahertz probes

Organic-inorganic hybrid metal halide perovskites (MHPs) have attracted tremendous attention for optoelectronic applications. The long photocarrier lifetime and moderate carrier mobility have been proposed as results of the large polaron formation in MHPs. However, it is challenging to measure the effective mass and carrier scattering parameters of the photogenerated large polarons in the ultrafast carrier recombination dynamics. Here, we show, in a one-step spectroscopic method, that the optical-pump and terahertz-electromagnetic probe (OPTP) technique allows us to access the nature of interplay of photoexcited unbound charge carriers and optical phonons in polycrystalline CH₃NH₃PbI₃ (MAPbI₃) of about 10 μm grain size. Firstly, we demonstrate a direct spectral evidence of the large polarons in polycrystalline MAPbI₃. Using the Drude-Smith-Lorentz model along with the Frӧhlich-type electron-phonon (e-ph) coupling, we determine the effective mass and scattering parameters of photogenerated polaronic carriers. We discover that the resulting moderate polaronic carrier mobility is mainly influenced by the enhanced carrier scattering, rather than the polaron mass enhancement. While, the formation of large polarons in MAPbI₃ polycrystalline grains results in a long charge carrier lifetime at room temperature. Our results provide crucial information about the photo-physics of MAPbI₃ and are indispensable for optoelectronic device development with better performance.

Dangling Octahedra Enable Edge States in 2D Lead Halide Perovskites

The structural reconstruction at the crystal layer edges of 2D lead halide perovskites (LHPs) leads to unique edge states (ES), which are manifested by prolonged carrier lifetime and reduced emission energy. These special ES can effectively enhance the optoelectronic performance of devices, but their intrinsic origin and working mechanism remain elusive. Here it is demonstrated that the ES of a family of 2D Ruddlesden-Popper LHPs [BA₂ CsPb₂ Br₇ , BA₂ MAPb₂ Br₇ , and BA₂ MA₂ Pb₃ Br₁₀ (BA = butylammonium; MA = methylammonium)] arise from the rotational symmetry elevation of the PbBr₆ octahedra dangling at the crystal layer edges. These dangling octahedra give rise to localized electronic states that enable an effective transport of electrons from the interior to layer edges, and the population of electrons in both the interior states and the ES can be manipulated via controlling the external fields. Moreover, the abundant phonons, activated by the dangling octahedra, can interact with electrons to facilitate radiative recombination, counterintuitive to the suppressive role commonly observed in conventional semiconductors. This work unveils the intrinsic atomistic and electronic origins of ES in 2D LHPs, which can stimulate the exploration of ES-based exotic optoelectronic properties and the corresponding design of high-performance devices for these emergent low-dimensional semiconductors.

Unveiling the Valence State of Interstitial Bromine on Charge Carrier Lifetime in CH3NH3PbBr3 by Quantum Dynamics Simulation

Interstitial halogens are detrimental to the optoelectronic properties of metal halide perovskites. Using nonadiabatic (NA) molecular dynamics, we demonstrate that the valence state of interstitial bromine strongly changes the carrier lifetimes of MAPbBr₃ (MA = CH₃NH₃⁺). Both neutral and negatively charged interstitial bromine create no midgap states, and they decrease the bandgap, weaken the NA coupling, and accelerate decoherence in a different extent with respect to pristine MAPbBr₃, making free charge recombination either slow down about a 3-fold or remain largely unchanged. In contrast, a positively charged interstitial bromine forms a Br trimer and introduces a deep electron trap state, causing a 1.4-fold increase of charge recombination followed by a rapid electron trapping or across the bandgap because of an enhanced NA coupling. The simulations uncover the influence of different charged interstitial bromine defects on MAPbBr₃ carrier lifetimes and provide rational guidelines for optimizing perovskite solar cells.

Correlated organic-inorganic motion enhances stability and charge carrier lifetime in mixed halide perovskites

Organic cations are believed to have little influence on the charge carrier lifetime in hybrid organic-inorganic perovskites. Experiments defy this expectation. We consider formamidinium lead iodide (FAPbI₃) doping with and without Br as two prototypical systems, and perform ab initio time-domain nonadiabatic (NA) molecular dynamics simulations to investigate nonradiative electron-hole recombination. The simulations demonstrate that correlated organic-inorganic motion stabilizes the lattice and inhibits nonradiative charge recombination in FAPbI₃ upon Br doping. Br doping suppresses the rotation of FA and the vibrations of both organic and inorganic components, and leads to hole localization and the extent of localization is enhanced upon thermal impact, notably reducing the NA coupling by decreasing the overlap between the electron and hole wave functions. Doping also slightly increases the bandgap for further decreasing NA coupling and enhances the open-circuit voltage of perovskite solar cells. The small NA coupling and large bandgap beat the slow coherence loss, delaying electron-hole recombination and extending the charge carrier lifetime to 1.5 ns in Br-doped FAPbI₃, which is on the order of 1.1 ns in pristine FAPbI₃. The obtained time scales are in good agreement with experiments. Multiple phonon modes, including those of both the inorganic and organic components, couple to the electronic subsystem and accommodate the excess electronic energy lost during nonradiative charge recombination. The study reveals the unexpected atomistic mechanisms for the reduction of electron-hole recombination upon Br doping, rationalizes the experiments, and advances our understanding of the excited-state dynamics of perovskite solar cells.

Nonlocal Screening Dictates the Radiative Lifetimes of Excitations in Lead Halide Perovskites

We use path integral molecular dynamics simulations and theory to elucidate the interactions between charge carriers, as mediated by a lead halide perovskite lattice. We find that the charge-lattice coupling of MAPbI₃ results in a repulsive interaction between electrons and holes at intermediate distances. The effective interaction is understood using a Gaussian field theory, whereby the underlying soft, polar lattice contributes a nonlocal screening between quasiparticles. Path integral calculations of this nonlocal screening model are used to rationalize the small exciton binding energy and low radiative recombination rate observed experimentally and are compared to traditional Wannier-Mott and Fröhlich models, which fail to do so. These results clarify the origin of the high power conversion efficiencies in lead halide perovskites. Emergent repulsive electron-hole interactions provide a design principle for optimizing soft, polar semiconductors.

Suppressing Oxygen-Induced Deterioration of Metal Halide Perovskites by Alkaline Earth Metal Doping: A Quantum Dynamics Study

Exposure to oxygen undermines stability and charge transport in metal halide perovskites, because molecular oxygen, as well as photogenerated superoxide and peroxide, erodes the perovskite lattice and creates charge traps. We demonstrate that alkaline earth metals passivate the oxygen species in CH₃NH₃PbI₃ by breaking the O-O bond and forming new bonds with the oxygen atoms, shifting the trap states of the antibonding O-O orbitals from inside the bandgap into the bands. In addition to eliminating the oxidizing species and the charge traps, doping with the alkaline earth metals slightly increases the bandgap and partially localizes the electron and hole wavefunctions, weakening the electron-hole and charge-phonon interactions and making the charge carrier lifetimes longer than even those in pristine CH₃NH₃PbI₃. Relative to CH₃NH₃PbI₃ exposed to oxygen and light, the charge carrier lifetime of the passivated CH₃NH₃PbI₃ increases by 2-3 orders of magnitude. The ab initio quantum dynamics simulations demonstrate that alkaline earth metals passivate efficiently not only intrinsic perovskite defects, but also the foreign species, providing a viable strategy to suppress perovskite degradation.

Dual Passivation of Point Defects at Perovskite Grain Boundaries with Ammonium Salts Greatly Inhibits Nonradiative Charge Recombination

Experiments demonstrate that grain boundaries (GBs) exhibit detrimental effect on carrier lifetimes in MAPbI₃ (MA= CH₃NH₃⁺). On the basis of the nonadiabatic (NA) molecular dynamics simulations, we demonstrated that NH₄Cl can simultaneously passivate the common point defects that introduce recombination centers at GBs and accelerate electron-hole recombination but shows small effects in the bulk. The MA interstitial (MA_i) and the substitutional MA to Pb (MA_Pb) in pristine MAPbI₃ leave the band gap and charge recombination rates largely unchanged but create deep electron traps at GBs by separately either distorting inorganic octahedra or creating an I-dimer. Cl^- and NH₄⁺ remove the in-gap states by either restoring the distorted octahedra or destroying the I-dimer. Thus, the band gap recovers to the pristine system, NA coupling decreases, and decoherence accelerates, extending the carrier lifetime even twice longer than MAPbI₃. This study shows that the negative role of GBs can be removed by dually passivating with NH₄Cl.

Mixed Dimethylammonium/Methylammonium Lead Halide Perovskite Crystals for Improved Structural Stability and Enhanced Photodetection

The solvent acidolysis crystallization technique is utilized to grow mixed dimethylammonium/methylammonium lead tribromide (DMA/MAPbBr₃ ) crystals reaching the highest dimethylammonium incorporation of 44% while maintaining the 3D cubic perovskite phase. These mixed perovskite crystals show suppression of the orthorhombic phase and a lower tetragonal-to-cubic phase-transition temperature compared to MAPbBr₃ . A distinct behavior is observed in the temperature-dependent photoluminescence properties of MAPbBr₃ and mixed DMA/MAPbBr₃ crystals due to the different organic cation dynamics governing the phase transition(s). Furthermore, lateral photodetectors based on these crystals show that, at room temperature, the mixed crystals possess higher detectivity compared to MAPbBr₃ crystals caused by structural compression and reduced surface trap density. Remarkably, the mixed-crystal devices exhibit large enhancement in their detectivity below the phase-transition temperature (at 200 K), while for the MAPbBr₃ devices only insignificant changes are observed. The high detectivity of the mixed crystals makes them attractive for visible-light communication and for space applications. The results highlight the importance of the synthetic technique for compositional engineering of halide perovskites that governs their structural and optoelectronic properties.

Coherent Two-Dimensional and Broadband Electronic Spectroscopies

Over the past few decades, coherent broadband spectroscopy has been widely used to improve our understanding of ultrafast processes (e.g., photoinduced electron transfer, proton transfer, and proton-coupled electron transfer reactions) at femtosecond resolution. The advances in femtosecond laser technology along with the development of nonlinear multidimensional spectroscopy enabled further insights into ultrafast energy transfer and carrier relaxation processes in complex biological and material systems. New discoveries and interpretations have led to improved design principles for optimizing the photophysical properties of various artificial systems. In this review, we first provide a detailed theoretical framework of both coherent broadband and two-dimensional electronic spectroscopy (2DES). We then discuss a selection of experimental approaches and considerations of 2DES along with best practices for data processing and analysis. Finally, we review several examples where coherent broadband and 2DES were employed to reveal mechanisms of photoinitiated ultrafast processes in molecular, biological, and material systems. We end the review with a brief perspective on the future of the experimental techniques themselves and their potential to answer an even greater range of scientific questions.