A rational synthesis of hierarchically porous, N-doped carbon from Mg-based MOFs: understanding the link between nitrogen content and oxygen reduction electrocatalysis

From Fenton and ORR 2e−-Type Catalysts to Bifunctional Electrodes for Environmental Remediation Using the Electro-Fenton Process

Currently, the presence of emerging contaminants in water sources has raised concerns worldwide due to low rates of mineralization, and in some cases, zero levels of degradation through conventional treatment methods. For these reasons, researchers in the field are focused on the use of advanced oxidation processes (AOPs) as a powerful tool for the degradation of persistent pollutants. These AOPs are based mainly on the in-situ production of hydroxyl radicals (OH•) generated from an oxidizing agent (H2O2 or O2) in the presence of a catalyst. Among the most studied AOPs, the Fenton reaction stands out due to its operational simplicity and good levels of degradation for a wide range of emerging contaminants. However, it has some limitations such as the storage and handling of H2O2. Therefore, the use of the electro-Fenton (EF) process has been proposed in which H2O2 is generated in situ by the action of the oxygen reduction reaction (ORR). However, it is important to mention that the ORR is given by two routes, by two or four electrons, which results in the products of H2O2 and H2O, respectively. For this reason, current efforts seek to increase the selectivity of ORR catalysts toward the 2e− route and thus improve the performance of the EF process. This work reviews catalysts for the Fenton reaction, ORR 2e− catalysts, and presents a short review of some proposed catalysts with bifunctional activity for ORR 2e− and Fenton processes. Finally, the most important factors for electro-Fenton dual catalysts to obtain high catalytic activity in both Fenton and ORR 2e− processes are summarized.

Combining polarized low-frequency Raman with XRD to identify directional structural motifs in a pyrolysis precursor

Long-range structures and dynamics are central to coordination chemistry, yet are hard to identify experimentally. By combining polarized low-frequency Raman spectroscopy with single crystal XRD to study barium nitrilotriacetate, a metal-organic coordination polymer and a useful pyrolysis precursor, we could assign Raman peaks experimentally to layer shear motions and perpendicular hydrogen bond vibrations. These directional long-range interactions further determined the preferred fracture directions during crystallization, establishing an important link between structural motifs in the precursor, and the porosity of the carbon it yields upon pyrolysis.

Bifunctional Catalysts for Reversible Oxygen Evolution Reaction and Oxygen Reduction Reaction

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.

Understanding the roles of amorphous domains and oxygen-containing groups of nitrogen-doped carbon in oxygen reduction catalysis: toward superior activity

The secret to high ORR activity lies in tuning the oxygen functionalities and the amount of graphitic vs. amorphous domains in nitrogen-doped carbons.

3D Heteroatom-Doped Carbon Nanomaterials as Multifunctional Metal-Free Catalysts for Integrated Energy Devices

Sustainable and cost-effective energy generation has become crucial for fulfilling present energy requirements. For this purpose, the development of cheap, scalable, efficient, and reliable catalysts is essential. Carbon-based heteroatom-doped, 3D, and mesoporous electrodes are very promising as catalysts for electrochemical energy conversion and storage. Various carbon allotropes doped with a variety of heteroatoms can be utilized for cost-effective mass production of electrode materials. 3D porous carbon electrodes provide multiple advantages, such as large surface area, maximized exposure to active sites, 3D conductive pathways for efficient electron transport, and porous channels to facilitate electrolyte diffusion. However, it is challenging to synthesize and functionalize isotropic 3D carbon structures. Here, various synthesis processes of 3D porous carbon materials are summarized to understand how their physical and chemical properties together with heteroatom doping dictate the electrochemical catalytic performance. Prospects of attractive 3D carbon structural materials for energy conversion and efficient integrated energy systems are also discussed.

Cooperative Surface-Particle Catalysis: The Role of the "Active Doughnut" in Catalytic Oxidation

We consider the factors that govern the activity of bifunctional catalysts comprised of active particles supported on active surfaces. Such catalysts are interesting because the adsorption and diffusion steps, which are often discounted in "conventional" catalytic scenarios, play a key role here. We present an intuitive model, the so-called "active doughnut" concept, defining an active catalytic region around the supported particles. This simple model explains the role of adsorption and diffusion steps in cascade catalytic cycles for active particles supported on active surfaces. The concept has two important practical implications. First, the reaction rate is no longer proportional to the number of active sites, but rather to the number of "communicative" active sites-those available to the reaction intermediates during their respective lifetimes. Second, it generates an important testable prediction concerning the dependence of the total reaction rate on the particle size. With these tools at hand, we examine six experimental examples of catalytic oxidation from the literature, and show that the active doughnut concept gives valuable insight even when detailed mechanistic information is hard to come by.

In Situ Generated Dual-Template Method for Fe/N/S Co-Doped Hierarchically Porous Honeycomb Carbon for High-Performance Oxygen Reduction

Heteroatoms doping is able to produce catalytic sites in carbon materials for oxygen reduction reaction (ORR); while hierarchically porous structure is necessary for efficient exposure and accessibility of the usually limited catalytic sites in such activated carbon catalysts. This work reports an in situ generated dual-template method to synthesize the Fe/N/S co-doped hierarchically porous carbon (FeNS/HPC), with NaCl crystallites formed during the precursor lyophilization process as the primary template to generate ∼500 nm macropores with ultrathin graphene-like carbon-layer walls, and Fe₃O₄ nanoparticles formed during the high-temperature carbonization process as the secondary template to produce mesopores on the walls of macropores. As well as the coexistence of graphitic-N, pyridinic-N, and thiophene-S which are beneficial to ORR, the as prepared FeNS/HPC possesses a highly graphitized and interconnected hierarchical porous structure, giving a specific surface area as high as 938 m² g^-1. As a consequence, it exhibits excellent four-electron oxygen reduction performance in both alkaline and acid electrolytes. The in situ generation and facile solution removal make the present template method a promising way for scale-up preparation of active porous carbon materials for various applications.

Boosting the Supercapacitance of Nitrogen-Doped Carbon by Tuning Surface Functionalities

The specific capacitance of a highly porous, nitrogen-doped carbon is nearly tripled by orthogonal optimization of the microstructure and surface chemistry. First, the carbons' hierarchical pore structure and specific surface area were tweaked by controlling the temperature and sequence of the thermal treatments. The best process (pyrolysis at 900 °C, washing, and subsequent annealing at 1000 °C) yielded a carbon with a specific capacitance of 117 F g^-1 -nearly double that of a carbon made by a typical single-step synthesis at 700 °C. Following the structural optimization, the surface chemistry of the carbons was enriched by applying an oxidation routine based on a mixture of nitric and sulfuric acid in a 1:4 ratio at two different treatment temperatures (0 and 20 °C) and different treatment times. The optimal treatment times were 4 h at 0 °C and only 1 h at 20 °C. Overall, the specific capacitance nearly tripled relative to the original carbon, reaching 168 F g^-1 . The inherent nitrogen doping of the carbon comes into interplay with the acid-induced surface functionalization, creating a mixture of oxygen- and nitrogen-oxygen functionalities. The evolution of the surface chemistry was carefully followed by X-ray photoelectron spectroscopy and by N₂ sorption porosimetry, revealing stepwise surface functionalization and simultaneous carbon etching. Overall, these processes are responsible for the peak-shaped capacitance trends in the carbons.

Hierarchical Porous Carbon Doped with Iron/Nitrogen/Sulfur for Efficient Oxygen Reduction Reaction

Hierarchical porous Fe/N/S-doped carbon with a high content of graphitic nitrogen (FeNS/HPC) has been successfully synthesized by a facile dual-template method. FeNS/HPC shows not only macropores resulting from the dissolution of the SiO₂ template, but abundant mesopores were also obtained after removing the in situ generated Fe₂O₃ nanoparticles on the ultrathin (∼4 nm) carbon shell of the macropores. Moreover, micropores are produced during the thermal pyrolysis of the carbon precursors. With respect to the electrochemical performance in the oxygen reduction reaction (ORR), FeNS/HPC not only exceeds other prepared porous carbon materials completely but also shows higher onset potential (0.97 vs 0.93 V), half-wave potentials (0.87 vs 0.83 V), and diffusion current density (5.5 vs 5.3 mA cm^-2) than those of Pt/C. Furthermore, FeNS/HPC also exhibits outstanding stability and methanol tolerance, making it a competent candidate for ORR. The following aspects contribute to its excellent ORR performance. (1) High content of graphitic N (5.1%) and codoping of pyridinic N species, thiophene-S, FeN_x, and graphitic carbon-encapsulated iron nanoparticles, providing highly active sites. (2) The hierarchical porous mesh structure with micro-, meso-, and macroporosity, accelerating the mass transfer and facilitating full utilization of the active sites. (3) The high specific surface area (1148 m² g^-1) of the graphitic carbon shell, assuring a large interface and rapid electron conduction for ORR.

The evolution of hierarchical porosity in self-templated nitrogen-doped carbons and its effect on oxygen reduction electrocatalysis

Pyrolitic self-templating synthesis is an effective method for creating hierarchically porous N-doped carbons.