Reactions of water and C1 molecules on carbide and metal-modified carbide surfaces

Synergistic effect of K and Zn on Fe-based catalysts for efficient CO2 hydrogenation

Excessive emission of CO2 into the atmosphere has severely impacted the global ecological environment. Converting CO2 into valuable chemicals and fuels is of great significance for sustainable development. However, low activity and undesirable selectivity often result from the inherent inertness of CO2. Herein, K- or/and Zn-modified Fe-based catalysts were prepared by an incipient-wetness impregnation method for CO2 hydrogenation via a cascade reaction. The results indicate that K species exist as K2O while Zn species exist as ZnFe2O4. In the CO2 hydrogenation pathway, K2O facilitates the adsorption of CO2 and restrains the adsorption of H2, accelerating the transformation of CO2 into C2-C4 olefins rather than paraffins while Zn species promote the dispersion of Fe species, leading to improved activity. Synergistically, a K- and Zn-modified Fe-based catalyst (2Zn-10K-Fe/Al) shows excellent catalytic CO2 hydrogenation activity, achieving a CO2 conversion of 77% which is 1.8 times that (42%) of the unmodified Fe-based catalyst (Fe/Al). Our catalyst also shows a significantly promoted selectivity to C2-C4 olefins of 17% in comparison with the Fe/Al catalyst (0%). It is envisioned that such a binary effect of elements might contribute to the low-cost and industrial production of Fe-based catalysts for selective CO2 conversion.

Carbon Dioxide Conversion on Supported Metal Nanoparticles: A Brief Review

The increasing concentration of anthropogenic CO2 in the air is one of the main causes of global warming. The Paris Agreement at COP 21 aims to reach the global peak of greenhouse gas emissions in the second half of this century, with CO2 conversion towards valuable added compounds being one of the main strategies, especially in the field of heterogeneous catalysis. In the current search for new catalysts, the deposition of metallic nanoparticles (NPs) supported on metal oxides and metal carbide surfaces paves the way to new catalytic solutions. This review provides a comprehensive description and analysis of the relevant literature on the utilization of metal-supported NPs as catalysts for CO2 conversion to useful chemicals and propose that the next catalysts generation can be led by single-metal-atom deposition, since in general, small metal particles enhance the catalytic activity. Among the range of potential indicators of catalytic activity and selectivity, the relevance of NPs’ size, the strong metal–support interactions, and the formation of vacancies on the support are exhaustively discussed from experimental and computational perspective.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.

Epitaxial Growth of Lead-Free 2D Cs3 Cu2 I5 Perovskites for High-Performance UV Photodetectors

The all-inorganic lead-free Cu-based halide perovskites represented by the Cs-Cu-I system, have sparked extensive interest recently due to their impressive photophysical characteristics. However, successive works on their potential application in light emission diodes and photodetectors rely on tiny polycrystals, in which the grain boundaries and defects may lead to the performance degradation of their embodied devices. Here, 2D all-inorganic perovskite Cs₃ Cu₂ I₅ single crystals are epitaxially grown on mica substrates, with a thickness down to 10 nm. The strong blue emission of the Cs₃ Cu₂ I₅ flakes may originate from the radiative transition of self-trapped excitons associated with a large Stocks shift and long (microsecond) decay time. Ultravioelt (UV) photodetectors based on individual Cs₃ Cu₂ I₅ nanosheets are fabricated via a swift and etching-free dry transfer approach, which reveal a high responsivity of 3.78 A W^-1 (270 nm, 5 V bias), as well as a fast response speed (τ_rise  ≈163 ms, τ_decay  ≈203 ms), outperforming congeneric UV sensors based on other 2D metal halide perovskites. This work therefore sheds light on the fabrication of green optoelectronic devices based on lead-free 2D perovskites, vital for the sustainable development of photoelectric technology.

Restructuring of the gold-carbide interface for low-temperature water-gas shift

A passivated Au/α-MoC catalyst, containing 2-4 layered Au clusters of 1.6 nm, was re-activated by CH₄/H₂ at 590 °C, during which the structure of the gold-carbide interface changed considerably. The partially-oxidized surface Mo species were carburized to MoC, while the Au clusters dispersed into smaller ones, accompanied by the coating of carbide thin layers on Au. This restructuring promoted charge transfer from Au to MoC and extended the Au-MoC interfacial perimeter, which was largely responsible for the activity in the low-temperature water-gas shift reaction.

Catalytic Reduction of Carbon Dioxide on the (001), (011), and (111) Surfaces of TiC and ZrC: A Computational Study

We present a computational study of the activity and selectivity of early transition-metal carbides as carbon dioxide reduction catalysts. We analyze the effects of the adsorption of CO₂ and H₂ on the (001), (011), and metal-terminated (111) surfaces of TiC and ZrC, as carbon dioxide undergoes either dissociation to CO or hydrogenation to COOH or HCOO. The relative stabilities of the three reduction intermediates and the activation energies for their formation allow the identification of favored pathways on each surface, which are examined as they lead to the release of CO, HCOOH, CH₃OH, and CH₄, thereby also characterizing the activity and selectivity of the two materials. Reaction energetics implicate HCO as the key common intermediate on all surfaces studied and rule out the release of formaldehyde. Surface hydroxylation is shown to be highly selective toward methane production as the formation of methanol is hindered on all surfaces by its barrierless conversion to CO.

Understanding and controlling the formation of surface anion vacancies for catalytic applications

Systematic computational efforts aimed at calculating surface anion vacancy formation energies as important descriptors of catalytic performance are summarized.

The surface phase structure evolution of the fcc MoC (001) surface in a steam reforming atmosphere: systematic kinetic and thermodynamic investigations

Systematic ab initio-based calculations were performed to clarify the surface structure evolution of the fcc MoC (001) surface at different H2O/H2 pressures.

Density functional theory studies of transition metal carbides and nitrides as electrocatalysts

Transition metal carbides and nitrides are interesting non-precious materials that have been shown to replace or reduce the loading of precious metals for catalyzing several important electrochemical reactions. The purpose of this review is to summarize density functional theory (DFT) studies, describe reaction pathways, identify activity and selectivity descriptors, and present a future outlook in designing carbide and nitride catalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), nitrogen reduction reaction (N₂RR), CO₂ reduction reaction (CO₂RR) and alcohol oxidation reactions. This topic is of high interest to scientific communities working in the field of electrocatalysis and this review should provide theoretical guidance for the rational design of improved carbide and nitride electrocatalysts.

Quadruple C-H Bond Activations of Methane by Dinuclear Rhodium Carbide Cation [Rh2C3]. JACS AU 2021;1:1631-1638. [PMID: 34723266 PMCID: PMC8549038 DOI: 10.1021/jacsau.1c00265]

The structure of the [Rh₂C₃]⁺ ion and its reaction with CH₄ in the gas phase have been studied by infrared photodissociation spectroscopy and mass spectrometry in conjunction with quantum chemical calculations. The [Rh₂C₃]⁺ ion is characterized to have an unsymmetrical linear [Rh-C-C-C-Rh]⁺ structure existing in two nearly isoenergetic spin states. The [Rh₂C₃]⁺ ion reacts with CH₄ at room temperature to form [Rh₂C]⁺ + C₃H₄ and [Rh₂C₂H₂]⁺ + C₂H₂ as the major products. In addition to the [Rh₂C]⁺ ion, the [Rh₂ ¹³C]⁺ ion is formed at about one-half of the [Rh₂C]⁺ intensity when the isotopic-labeled ¹³CH₄ sample is used. The production of [Rh₂ ¹³C]⁺ indicates that the linear C₃ moiety of [Rh₂C₃]⁺ can be replaced by the bare carbon atom of methane with all four C-H bonds being activated. The calculations suggest that the overall reactions are thermodynamically exothermic, and that the two Rh centers are the reactive sites for C-H bond activation and hydrogen atom transfer reactions.

Atomically Dispersed Co2+ Sites Incorporated into a Silicalite-1 Zeolite Framework as a High-Performance and Coking-Resistant Catalyst for Propane Nonoxidative Dehydrogenation to Propylene

Propane nonoxidative dehydrogenation (PDH) is a promising route to produce propylene with the development of shale gas exploration technology. Co-based catalysts with low cost and low toxicity could activate C-H effectively, but they suffer from deactivation with coke formation. In this work, a catalyst formed by incorporating highly dispersed Co sites into a Silicalite-1 zeolite framework (Co-Silicalite-1) is synthesized by a hydrothermal protocol in the presence of ammonia, which exhibits superior propane dehydrogenation catalytic performance with 0.0946 mmol C₃H₆·s^-1·g_Co^-1 and propylene selectivity higher than 98.5%. It also shows outstanding catalytic stability and coking resistance in a 3560 min time-on-stream. Combined characterization results demonstrate that the tetrahedrally coordinated Co²⁺ site serves as the PDH catalytic active site, which is stabilized by Si-O units of the zeolite framework. Incorporation of Co sites into the zeolite framework could avoid the reduction of Co species to metallic Co. Moreover, the catalytic performance is improved by the enhanced propane adsorption and propylene desorption.

Subsurface-Carbon-Induced Local Charge of Copper for an On-Surface Displacement Reaction

Transition-metal carbides have sparked unprecedented enthusiasm as high-performance catalysts in recent years. Still, the catalytic properties of copper carbide remain unexplored. By introducing subsurface carbon to Cu(111), a displacement reaction of a proton in a carboxyl acid group with a single Cu atom is demonstrated at the atomic scale and room temperature. Its occurrence is attributed to the C-doping-induced local charge of surface Cu atoms (up to +0.30 e/atom), which accelerates the rate of on-surface deprotonation via reduction of the corresponding energy barrier, thus enabling the instant displacement of a proton with a Cu atom when the molecules adsorb on the surface. This well-defined and robust Cu^δ+ surface based on subsurface-carbon doping offers a novel catalytic platform for on-surface synthesis.

How the in situ monitoring of bulk crystalline phases during catalyst activation results in a better understanding of heterogeneous catalysis

The present Highlight article shows the importance of the in situ monitoring of bulk crystalline compounds for a more thorough understanding of heterogeneous catalysts at the intersection of catalysis, materials science, crystallography and inorganic chemistry. Although catalytic action is widely regarded as a purely surface-bound phenomenon, there is increasing evidence that bulk processes can detrimentally or beneficially influence the catalytic properties of various material classes. Such bulk processes include polymorphic transformations, formation of oxygen-deficient structures, transient phases and the formation of a metal-oxide composite. The monitoring of these processes and the subsequent establishment of structure-property relationships are most effective if carried out in situ under real operation conditions. By focusing on synchrotron-based in situ X-ray diffraction as the perfect tool to follow the evolution of crystalline species, we exemplify the strength of the concept with five examples from various areas of catalytic research. As catalyst activation studies are increasingly becoming a hot topic in heterogeneous catalysis, the (self-)activation of oxide- and intermetallic compound-based materials during methanol steam and methane dry reforming is highlighted. The perovskite LaNiO3 is selected as an example to show the complex structural dynamics before and during methane dry reforming, which is only revealed upon monitoring all intermediate crystalline species in the transformation from LaNiO3 into Ni/La2O3/La2O2CO3. ZrO2-based materials form the second group, indicating the in situ decomposition of the intermetallic compound Cu51Zr14 into an epitaxially stabilized Cu/tetragonal ZrO2 composite during methanol steam reforming, the stability of a ZrO0.31C0.69 oxycarbide and the gas-phase dependence of the tetragonal-to-monoclinic ZrO2 polymorphic transformation. The latter is the key parameter to the catalytic understanding of ZrO2 and is only appreciated in full detail once it is possible to follow the individual steps of the transformation between the crystalline polymorphic structures. A selected example is devoted to how the monitoring of crystalline reactive carbon during methane dry reforming operation aids in the mechanistic understanding of a Ni/MnO catalyst. The most important aspect is the strict use of in situ monitoring of the structural changes occurring during (self-)activation to establish meaningful structure-property relationships allowing conclusions beyond isolated surface chemical aspects.

Oxygen-evolving catalytic atoms on metal carbides

Single-atom catalysts have shown promising performance in various catalytic reactions. Catalytic metal sites supported on oxides or carbonaceous materials are usually strongly coordinated by oxygen or heteroatoms, which naturally affects their electronic environment and consequently their catalytic activity. Here, we reveal the stabilization of single-atom catalysts on tungsten carbides without the aid of heteroatom coordination for efficient catalysis of the oxygen evolution reaction (OER). Benefiting from the unique structure of tungsten carbides, the atomic FeNi catalytic sites are weakly bonded with the surface W and C atoms. The reported catalyst shows a low overpotential of 237 mV at 10 mA cm^-2, which can even be lowered to 211 mV when the FeNi content is increased, a high turnover frequency value of 4.96 s^-1 (η = 300 mV) and good stability (1,000 h). Density functional theory calculations show that either metallic Fe/Ni atoms or (hydro)oxide FeNi species are responsible for the high OER activity. We suggest that the application of inexpensive and durable WC_x supports opens up a promising pathway to develop further single-atom catalysts for electrochemical catalytic reactions.

True Nature of the Transition-Metal Carbide/Liquid Interface Determines Its Reactivity

Compound materials, such as transition-metal (TM) carbides, are anticipated to be effective electrocatalysts for the carbon dioxide reduction reaction (CO2RR) to useful chemicals. This expectation is nurtured by density functional theory (DFT) predictions of a break of key adsorption energy scaling relations that limit CO2RR at parent TMs. Here, we evaluate these prospects for hexagonal Mo2C in aqueous electrolytes in a multimethod experiment and theory approach. We find that surface oxide formation completely suppresses the CO2 activation. The oxides are stable down to potentials as low as -1.9 V versus the standard hydrogen electrode, and solely the hydrogen evolution reaction (HER) is found to be active. This generally points to the absolute imperative of recognizing the true interface establishing under operando conditions in computational screening of catalyst materials. When protected from ambient air and used in nonaqueous electrolyte, Mo2C indeed shows CO2RR activity.

Propane dehydrogenation: catalyst development, new chemistry, and emerging technologies

This review describes recent advances in the propane dehydrogenation process in terms of emerging technologies, catalyst development and new chemistry.

Surface phase structures responsible for the activity and deactivation of the fcc MoC (111)-Mo surface in steam reforming: a systematic kinetic and thermodynamic investigation

Multiscale investigation on MoC surface phase evolution to clarify surface structures responsible for reactivity and deactivation in steam reforming.

Surface activation by electron scavenger metal nanorod adsorption on TiH2, TiC, TiN, and Ti2O3

Metal/oxide support perimeter sites are known to provide unique properties because the nearby metal changes the local environment on the support surface. In particular, the electron scavenger effect reduces the energy necessary for surface anion desorption, and thereby contributes to activation of the (reverse) Mars-van Krevelen mechanism. This study investigated the possibility of such activation in hydrides, carbides, nitrides, and sulfides. The work functions (WFs) of known hydrides, carbides, nitrides, oxides, and sulfides with group 3, 4, or 5 cations (Sc, Y, La, Ti, Zr, Hf, V, Nb, and Ta) were calculated. The WFs of most hydrides, carbides, and nitrides are smaller than the WF of Ag, implying that the electron scavenger effect may occur when late transition metal nanoparticles are adsorbed on the surface. The WF of oxides and sulfides decreases when reduced. The surface anion vacancy formation energy correlates well with the bulk formation energy in carbides and nitrides, while almost no correlation is found in hydrides because of the small range of surface hydrogen vacancy formation energy values. The electron scavenger effect is explicitly observed in nanorods adsorbed on TiH2 and Ti2O3; the surface vacancy formation energy decreases at anion sites near the nanorod, and charge transfer to the nanorod happens when an anion is removed at such sites. Activation of hydrides, carbides, and nitrides by nanorod adsorption and screening support materials through WF calculation are expected to open up a new category of supported catalysts.

Exploiting two-dimensional morphology of molybdenum oxycarbide to enable efficient catalytic dry reforming of methane

The two-dimensional morphology of molybdenum oxycarbide (2D-Mo2COx) nanosheets dispersed on silica is found vital for imparting high stability and catalytic activity in the dry reforming of methane. Here we report that owing to the maximized metal utilization, the specific activity of 2D-Mo2COx/SiO2 exceeds that of other Mo2C catalysts by ca. 3 orders of magnitude. 2D-Mo2COx is activated by CO2, yielding a surface oxygen coverage that is optimal for its catalytic performance and a Mo oxidation state of ca. +4. According to ab initio calculations, the DRM proceeds on Mo sites of the oxycarbide nanosheet with an oxygen coverage of 0.67 monolayer. Methane activation is the rate-limiting step, while the activation of CO2 and the C-O coupling to form CO are low energy steps. The deactivation of 2D-Mo2COx/SiO2 under DRM conditions can be avoided by tuning the contact time, thereby preventing unfavourable oxygen surface coverages.

Carbon Dioxide Conversion with High-Performance Photocatalysis into Methanol on NiSe2/WSe2

Climate change has been recognized as a threatening environmental problem around the world. CO2 is considered to be the main component of greenhouse gas. By using solar energy (light energy) as the energy source, photocatalytic conversion is one of the most effective technologies to reveal the clean utilization of CO2. Herein, using sodium tungstate, nickel nitrate, and selenium powder as the main raw materials, the high absorption and utilization of WSe2 for light energy and the high intrinsic conductivity of NiSe2 were combined by a hydrothermal method to prepare NiSe2/WSe2 and hydrazine hydrate as the reductant. Then, high-performance NiSe2/WSe2 photocatalytic material was prepared. The characterization results of XRD, XPS, SEM, specific surface area, and UV-visible spectroscopy show that the main diffraction peak of synthesized NiSe2/WSe2 is sharp, which basically coincides with the standard card. After doping NiSe2, the morphology of WSe2 was changed from a flake shape to smaller and more trivial crystal flakes, which demonstrates richer exposed edges and more active sites; the specific surface area increased from 3.01 m2 g−1 to 8.52 m2 g−1, and the band gap becomes wider, increasing from 1.66 eV to 1.68 eV. The results of a photocatalytic experiment show that when the prepared NiSe2/WSe2 catalyst is used to conduct photocatalytic reduction of CO2, the yield of CH3OH is significantly increased. After reaction for 10 h, the maximum yield could reach 3.80 mmol g−1, which presents great photocatalytic activity.

Molybdenum carbide and oxycarbide from carbon-supported MoO3 nanosheets: phase evolution and DRM catalytic activity assessed by TEM and in situ XANES/XRD methods

Molybdenum carbide (β-Mo₂C) supported on carbon spheres was prepared via a carbothermal hydrogen reduction (CHR) method from delaminated nanosheets of molybdenum(vi) oxide (d-MoO₃/C). The carburization process was followed by combined in situ XANES/XRD analysis revealing the formation of molybdenum oxycarbide Mo₂C_xO_y as an intermediate phase during the transformation of d-MoO₃/C to β-Mo₂C/C. It was found that Mo₂C_xO_y could not be completely carburized to β-Mo₂C under a He atmosphere at 750 °C, instead a reduction in H₂ is required. The β-Mo₂C/C obtained showed activity and stability for the dry reforming of methane at 800 °C and 8 bar. In situ XANES/XRD evaluation of the catalyst under DRM reaction conditions combined with high resolution TEM analysis revealed the evolution of β-Mo₂C/C to Mo₂C_xO_y/C. Notably, the gradual oxidation of β-Mo₂C/C to Mo₂C_xO_y/C correlates directly with the increased activity of the competing reverse water gas shift reaction.

Coupling of Solar Energy and Thermal Energy for Carbon Dioxide Reduction: Status and Prospects

Enormous efforts have been devoted to the reduction of carbon dioxide (CO₂ ) by utilizing various driving forces, such as heat, electricity, and radiation. However, the efficient reduction of CO₂ is still challenging because of sluggish kinetics. Recent pioneering studies from several groups, including us, have demonstrated that the coupling of solar energy and thermal energy offers a novel and promising strategy to promote the activity and/or manipulate selectivity in CO₂ reduction. Herein, we clarify the definition and principles of coupling solar energy and thermal energy, and comprehensively review the status and prospects of CO₂ reduction by coupling solar energy and thermal energy. Catalyst design, reactor configuration, photo-mediated activity/selectivity, and mechanism studies in photo-thermo CO₂ reduction will be emphasized. The aim of this Review is to promote understanding towards CO₂ activation and provide guidelines for the design of new catalysts for the efficient reduction of CO₂ .

Molybdenum Carbide: Controlling the Geometric and Electronic Structure of Noble Metals for the Activation of O-H and C-H Bonds

In the field of heterogeneous catalysis, transition metal carbides (TMCs) have attracted growing and extensive attention as a group of important catalytic materials for a variety of energy-related reactions. Due to the incorporation of carbon atoms at the interstitial sites, TMCs possess much higher density of states near the Fermi level, endowing the material with noble-metal-like electron configuration and catalytic behaviors. Crystal structure, site occupancies, surface termination, and metal/carbon defects in the bulk phase or at the surface are the structural factors that influence the behavior of the TMCs in catalytic reactions. In the early studies of heterogeneous catalytic applications of TMCs, the carbide itself was used individually as the catalytically active site, which exhibited unique catalytic performance comparable to precious metal catalysts toward hydrogenation, dehydrogenation, isomerization, and hydrodeoxygenation. To promote the catalytic performance, the doping of secondary transition metals into the carbide lattice to form bimetallic carbides was extensively studied. As a recent development, the utilization of TMCs as functionalized catalyst supports has achieved a series of significant breakthroughs in low-temperature catalytic applications, including the reforming of alcohols, water-gas shift reactions, and the hydrogenation of functional groups for chemical production and biomass conversion. Generally, the excellence of TMCs as supports is attributed to three factors: the modulation of geometric and electronic structures of the supported metal centers, the special reactivity of TMC supports that accelerates certain elementary step and influences the surface coverage of intermediates, and the special interfacial properties at the metal-carbide interface that enhance the synergistic effect. In this Account, we will review recent discoveries from our group and other researchers on the special catalytic properties of face-centered cubic MoC (α-MoC) as both a special catalyst and a functional support that enables highly efficient low-temperature O-H bond activation for several important energy-related catalytic applications, including hydrogen evolution from aqueous phase methanol reforming, ultralow temperature water-gas shift reaction, and biomass conversion. In particular, α-MoC has been demonstrated to exhibit unprecedented strong interaction with the supported metals compared with other TMCs, which not only stabilizes the under-coordinated metal species (single atoms and layered clusters) under strong thermal perturbation and harsh reaction conditions but also tunes the charge density at the metal sites and modifies their catalytic behavior in C-H activation and CO chemisorption. We will discuss how to exploit the metal/α-MoC interaction and interfacial properties to construct CO-tolerant selective hydrogenation catalysts for nitroarene derivatives. Several examples of constructing bifunctional tandem catalytic systems using molybdenum carbides that enable hydrogen extraction and utilization in one-pot conversion of biomass substrates and Fischer-Tropsch synthesis are also highlighted.

Zirconium Oxycarbide: A Highly Stable Catalyst Material for Electrochemical Energy Conversion

Metal carbides and oxycarbides have recently gained considerable interest due to their (electro)catalytic properties that differ from those of transition metals and that have potential to outperform them as well. The stability of zirconium oxycarbide nanopowders (ZrO_0.31C_0.69), synthesized via a hybrid solid‐liquid route, is investigated in different gas atmospheres from room temperature to 800 °C by using in‐situ X‐ray diffraction and in‐situ electrical impedance spectroscopy. To feature the properties of a structurally stable Zr oxycarbide with high oxygen content, a stoichiometry of ZrO_0.31C_0.69 has been selected. ZrO_0.31C_0.69 is stable in reducing gases with only minor amounts of tetragonal ZrO₂ being formed at high temperatures, whereas it decomposes in CO₂ and O₂ gas atmosphere. From online differential electrochemical mass spectrometry measurements, the hydrogen evolution reaction (HER) onset potential is determined at −0.4 V_RHE. CO₂ formation is detected at potentials as positive as 1.9 V_RHE as ZrO_0.31C_0.69 decomposition product, and oxygen is anodically formed at 2.5 V_RHE, which shows the high electrochemical stability of this material in acidic electrolyte. This peopwery makes the material suited for electrocatalytic reactions at anodic potentials, such as CO and alcohol oxidation reactions, in general.

Enhancing Activity and Reducing Cost for Electrochemical Reduction of CO2 by Supporting Palladium on Metal Carbides

Electrochemical CO₂ reduction reaction (CO₂ RR) with renewable electricity is a potentially sustainable method to reduce CO₂ emissions. Palladium supported on cost-effective transition-metal carbides (TMCs) are studied to reduce the Pd usage and tune the activity and selectivity of the CO₂ RR to produce synthesis gas, using a combined approach of studying thin films and practical powder catalysts, in situ characterization, and density functional theory (DFT) calculations. Notably, Pd/TaC exhibits higher CO₂ RR activity, stability and CO Faradaic efficiency than those of commercial Pd/C while significantly reducing the Pd loading. In situ measurements confirm the transformation of Pd into hydride (PdH) under the CO₂ RR environment. DFT calculations reveal that the TMC substrates modify the binding energies of key intermediates on supported PdH. This work suggests the prospect of using TMCs as low-cost and stable substrates to support and modify Pd for enhanced CO₂ RR activity.

Hybrid synthesis of zirconium oxycarbide nanopowders with defined and controlled composition

A combined synthesis strategy involving a carbothermal reduction and gelation approach with glycine as gelating agent was used to obtain Zr-based (oxy)carbide materials with defined and controlled composition. A comparatively low temperature approach (1500 °C) allows exploration of the ZrC–ZrO₂ phase diagram and reproducibly leads to zirconium (oxy)carbide phases with different C/Zr ratios, as confirmed by combined X-ray diffraction (XRD) and transmission electron microscopy (TEM) data. The latter also indicates a chemically very homogeneous distribution of oxygen and carbon throughout the sample bulk, a prerequisite for further characterization of its intrinsic physico-chemical properties. Due to the general variability of the synthesis procedure – variation of metal precursor, amount of gelating agent and carbon precursor source – it is expected that the method can be easily adapted and transferred to other metal – oxycarbide materials.

A combined synthesis strategy involving a carbothermal reduction and gelation approach with glycine as gelating agent was used to obtain Zr-based (oxy)carbide materials with defined and controlled composition.

Recent progress in Pt and Pd-based hybrid nanocatalysts for methanol electrooxidation

Hybrid nanomaterials can combine merits of different components and modulate electronic states of Pt and Pd based nanocrystals simultaneously.

Highly Active Bifunctional Electrocatalysts for Oxygen Evolution and Reduction in Zn-Air Batteries

To realize the full performance of Zn-air batteries, the co-presence of a highly efficient oxygen reduction reaction (ORR) and an oxygen evolution reaction (OER) in the system is critical. Although copper and nickel are known to be bifunctional catalysts for ORR and OER, sluggish reactions as a result of the exceptionally strong O=O bond on the metal surface make it difficult to achieve high system efficiency. In this study, a metal carbide layer (CuC_x and NiC_x ) on dendritic copper and nickel is fabricated by a facile electrodeposition process to provide efficient catalytic active sites with moderate binding energy for easy electron transfer in both the OER and the ORR. The dendritic structure provides an enriched catalytic surface and the protective metal carbide layer offers an appropriate O binding energy and durability of Zn-air batteries. Owing to the presence of the stable metal carbide surface on the dendritic metal, the CuC_x /Cu and NiC_x /Ni catalysts exhibited well-defined limiting current densities of -5.19 and -5.11 mA cm^-2 , respectively, and improved ORR and OER activities with lower polarization than the corresponding metal catalysts. Density functional theory revealed a 0.74 eV decrease in the overpotential of NiC_x /Ni-catalyzed OER reactions compared with Ni-catalyzed OER reactions. The experimental and theoretical results prove that carbide layers on dendritic metal surfaces can greatly improve the activity of ORR and OER bifunctional electrocatalysts for Zn-air batteries.