Synthesis of polyoxothiometalates through site-selective post-editing sulfurization of polyoxometalates

Polyoxometalates (POMs) function as platforms for synthesizing structurally well-defined inorganic molecules with diverse structures, metals, compositions, and arrangements. Although post-editing of the oxygen sites of POMs has great potential for development of unprecedented structures, electronic states, properties, and applications, facile methods for site-selective substitution of the oxygen sites with other atoms remain limited. Herein, we report a direct site-selective oxygen-sulfur substitution method that enables transforming POMs [XW12O40]4- (X = Si, Ge) to Keggin-type polyoxothiometalates (POTMs) [XW12O28S12]4- using sulfurizing reagents in an organic solvent. The resulting POTMs retain the original Keggin-type structure, with all 12 surface W[double bond, length as m-dash]O groups selectively converted to W[double bond, length as m-dash]S without sulfurization of other oxygen sites. These POTMs show high stability against water and O2 in organic solvents and a drastic change in the electronic states and redox properties. The findings of this study represent a facile method for converting POMs to POTMs, leading to the development of their unique properties and applications in diverse fields, including (photo)catalysis, sensing, optics, electronics, energy conversion, and batteries.

Synthesis of a Gold-Silver Alloy Nanocluster within a Ring-Shaped Polyoxometalate and Its Photocatalytic Property

Alloying is an effective method for modulating metal nanoclusters to enrich their structural diversity and physicochemical properties. Recent investigations have demonstrated that polyoxometalates (POMs) can act as effective multidentate ligands for silver (Ag) nanoclusters to endow them with synergistic properties, reactivity, catalytic properties, and stability. However, the application of POMs as ligands has been confined predominantly to monometallic nanoclusters. Herein, we report a synthetic method for fabricating surface-exposed gold (Au)-Ag alloy nanoclusters within a ring-shaped POM ([P8W48O184]40-). Reacting an Ag nanocluster stabilized by the ring-shaped POM with Au ions (Au+) was found to substitute several Ag atoms at the core of the nanocluster with Au atoms. The resultant {Au8Ag26} alloy nanocluster demonstrated superior photocatalytic activity and stability compared to the pristine Ag nanocluster in the aerobic oxidation of α-terpinene under visible-light irradiation. These findings provide fundamental insights into the formation and catalytic properties of POM-stabilized alloy nanoclusters and advance exploration into the synthesis and applications of diverse metal nanoclusters.

Ultra-stable and highly reactive colloidal gold nanoparticle catalysts protected using multi-dentate metal oxide nanoclusters

Owing to their remarkable properties, gold nanoparticles are applied in diverse fields, including catalysis, electronics, energy conversion and sensors. However, for catalytic applications of colloidal gold nanoparticles, the trade-off between their reactivity and stability is a significant concern. Here we report a universal approach for preparing stable and reactive colloidal small (~3 nm) gold nanoparticles by using multi-dentate polyoxometalates as protecting agents in non-polar solvents. These nanoparticles exhibit exceptional stability even under conditions of high concentration, long-term storage, heating and addition of bases. Moreover, they display excellent catalytic performance in various oxidation reactions of organic substrates using molecular oxygen as the sole oxidant. Our findings highlight the ability of inorganic multi-dentate ligands with structural stability and robust steric and electronic effects to confer stability and reactivity upon gold nanoparticles. This approach can be extended to prepare metal nanoparticles other than gold, enabling the design of novel nanomaterials with promising applications.

Preparation and isolation of mono-Nb substituted Keggin-type phosphomolybdic acid and its application as an oxidation catalyst for isobutylaldehyde and Wacker-type oxidation

The potassium and proton mixed salt of mono-Nb substituted Keggin-type phosphomolybdate, KH3[PMo11NbO40], was isolated in a pure form by reacting Keggin-type phosphomolybdic acid (H3[PMo12O40]) and potassium hexaniobate (K8Nb6O19) in water, followed by freeze-drying. The all protonic form, H4[PMo11NbO40], was isolated via proton exchange with H-resin and subsequent freeze-drying. The most crucial factor to isolate KH3[PMo11NbO40] and H4[PMo11NbO40] in pure forms is the evaporation of water using the freeze-drying method. Using a similar procedure, the potassium salt of the di-Nb substituted compound K5[PMo10Nb2O40] was isolated. H4[PMo11NbO40] exhibited high catalytic activity for oxidizing isobutylaldehyde to methacrolein and moderate catalytic activity for the Wacker-type oxidation of allyl phenyl ether when combined with Pd(OAc)2.

Surface-exposed silver nanoclusters inside molecular metal oxide cavities

The surfaces of metal nanoclusters, including their interface with metal oxides, exhibit a high reactivity that is attractive for practical purposes. This high reactivity, however, has also hindered the synthesis of structurally well-defined hybrids of metal nanoclusters and metal oxides with exposed surfaces and/or interfaces. Here we report the sequential synthesis of structurally well-defined {Ag₃₀} nanoclusters in the cavity of ring-shaped molecular metal oxides known as polyoxometalates. The {Ag₃₀} nanoclusters possess exposed silver surfaces yet are stabilized both in solution and the solid state by the surrounding ring-shaped polyoxometalate species. The clusters underwent a redox-induced structural transformation without undesirable agglomeration or decomposition. Furthermore, {Ag₃₀} nanoclusters showed high catalytic activity for the selective reduction of several organic functional groups using H₂ under mild reaction conditions. We believe that these findings will serve for the discrete synthesis of surface-exposed metal nanoclusters stabilized by molecular metal oxides, which may in turn find applications in, for example, the fields of catalysis and energy conversion.

Electronic Structure and Photoactivity of Organoarsenic Hybrid Polyoxometalates

Organofunctionalization of polyoxometalates (POMs) allows the preparation of hybrid molecular systems with tunable electronic properties. Currently, there are only a handful of approaches that allow for the fine-tuning of POM frontier molecular orbitals in a predictable manner. Herein, we demonstrate a new functionalization method for the Wells-Dawson polyoxotungstate [P₂W₁₈O₆₂]^6- using arylarsonic acids which enables modulation of the redox and photochemical properties. Arylarsonic groups facilitate orbital mixing between the organic and inorganic moieties, and the nature of the organic substituents significantly impacts the redox potentials of the POM core. The photochemical response of the hybrid POMs correlates with their computed and experimentally estimated lowest unoccupied molecular orbital energies, and the arylarsonic hybrids are found to exhibit increased visible light photosensitivity comparable with that of arylphosphonic analogues. Arylarsonic hybridization offers a route to stable and tunable organic-inorganic hybrid systems for a range of redox and photochemical applications.

Recent Advances in Hybrid Materials of Metal Nanoparticles and Polyoxometalates

Polyoxometalates (POMs), anionic metal-oxygen nanoclusters that possess various composition-dependent properties, are widely used to modify the existing properties of metal nanoparticles and to endow them with new ones. Herein, we present an overview of recent advances in hybrid materials that consist of metal nanoparticles and POMs. Following a brief introduction on the inception of this area and its development, representative properties and applications of these materials in various fields such as electrochemistry, photochemistry, and catalysis are introduced. We discuss how the combination of two classic inorganic materials facilitates cooperative and synergistic behavior, and we also give personal perspectives on the future development of this field.

Molecular Iron Oxide Clusters Boost the Oxygen Reduction Reaction of Platinum Electrocatalysts at Near‐Neutral pH

The oxygen reduction reaction (ORR) is a key energy conversion process, which is critical for the efficient operation of fuel cells and metal–air batteries. Here, we report the significant enhancement of the ORR‐performance of commercial platinum‐on‐carbon electrocatalysts when operated in aqueous electrolyte solutions (pH 5.6), containing the polyoxoanion [Fe₂₈(μ₃‐O)₈(L‐(−)‐tart)₁₆(CH₃COO)₂₄]²⁰⁻. Mechanistic studies provide initial insights into the performance‐improving role of the iron oxide cluster during ORR. Technological deployment of the system is demonstrated by incorporation into a direct formate microfluidic fuel cell (DFMFC), where major performance increases are observed when compared with reference electrolytes. The study provides the first examples of iron oxide clusters in electrochemical energy conversion and storage.

Variable control of the electronic states of a silver nanocluster via protonation/deprotonation of polyoxometalate ligands

The properties of metal nanoclusters depend on both their structures and electronic states. However, in contrast to the significant advances achieved in the synthesis of structurally well-defined metal nanoclusters, systematic control of their electronic states is still challenging. In particular, stimuli-responsive and reversible control of the electronic states of metal nanoclusters is attractive from the viewpoint of their practical applications. Recently, we developed a synthesis method for atomically precise Ag nanoclusters using polyoxometalates (POMs) as inorganic ligands. Herein, we exploited the acid/base nature of POMs to reversibly change the electronic states of an atomically precise {Ag27} nanocluster via protonation/deprotonation of the surrounding POM ligands. We succeeded in systematically controlling the electronic states of the {Ag27} nanocluster by adding an acid or a base (0-6 equivalents), which was accompanied by drastic changes in the ultraviolet-visible absorption spectra of the nanocluster solutions. These results demonstrate the great potential of Ag nanoclusters for unprecedented applications in various fields such as sensing, biolabeling, electronics, and catalysis.

Nanostructured Manganese Oxides within a Ring-Shaped Polyoxometalate Exhibiting Unusual Oxidation Catalysis

Nanosized manganese oxides have recently received considerable attention for their synthesis, structures, and potential applications. Although various synthetic methods have been developed, precise synthesis of novel nanostructured manganese oxides are still challenging. In this study, using a structurally defined nanosized cavity inside a ring-shaped polyoxometalate, we succeeded in synthesizing two types of discrete 18 and 20 nuclear nanostructured manganese oxides, Mn18 and Mn20, respectively. In particular, Mn18 showed much higher catalytic activity than other manganese oxides for the oxygenation of alkylarenes including electron-deficient ones, and the reaction proceeded through a unique reaction mechanism due to its unusual manganese oxide structure.

Concerted Multiproton-Multielectron Transfer for the Reduction of O2 to H2O with a Polyoxovanadate Cluster

The concerted transfer of protons and electrons enables the activation of small-molecule substrates by bypassing energetically costly intermediates. Here, we present the synthesis and characterization of several hydrogenated forms of an organofunctionalized vanadium oxide assembly, [V₆O₁₃(TRIOL^NO₂)₂]^2-, and their ability to facilitate the concerted transfer of protons and electrons to O₂. Electrochemical analysis reveals that the fully reduced cluster is capable of mediating 2e^-/2H⁺ transfer reactions from surface hydroxide ligands, with an average bond dissociation free energy (BDFE) of 61.6 kcal/mol. Complementary stoichiometric experiments with hydrogen-atom-accepting reagents of established bond strengths confirm that the electrochemically established BDFE predicts the 2H⁺/2e^- transfer reactivity of the assembly. Finally, the reactivity of the reduced polyoxovanadate toward O₂ reduction is summarized; our results indicate a stepwise reduction of the substrate, proceeding through H₂O₂ en route to the formation of H₂O. Kinetic isotope effect experiments confirm the participation of hydrogen transfer in the rate-determining step of both the reduction of O₂ and H₂O₂. This work constitutes the first example of hydrogen atom transfer for small-molecule activation with reduced polyoxometalates, where both electron and proton originate from the cluster.

O2 Activation with a Sterically Encumbered, Oxygen-Deficient Polyoxovanadate-Alkoxide Cluster

The isolation of the oxygen-deficient, polyoxovanadate-alkoxide (POV-alkoxide) cluster, [ⁿBu₄N][V₆O₆(OMe)₁₂(MeCN)], and its subsequent reactivity with oxygen (O₂), has demonstrated the utility of these assemblies as molecular models for heterogeneous metal oxide catalysts. However, the mechanism through which this cluster activates and reduces O₂ to generate the oxygenated species is poorly understood. Currently it is speculated that this POV-alkoxide mediates the four-electron O-O bond cleavage through an O₂ bridged dimeric intermediate, a mechanism which is not viable for O₂ reduction at solid-state metal oxide surfaces. Here, we report the successful activation and reduction of O₂ by the calix-functionalized POV-alkoxide cluster, [ⁿBu₄N][(calix)V₆O₆(OMe)₈](MeCN)] (calix = 4-tert-butylcalix[4]arene). The steric hindrance imparted to the open vanadium site by the calix motif eliminates the possibility of cooperative, bimolecular O₂ activation, allowing for a comparison of the reactivity of this system with that of the nonfunctionalized POV-alkoxide described previously. Rigorous characterization of the calix-substituted assembly, enabled by its newfound solubility in organic solvent, reveals that the incorporation of the tetradentate aryloxide ligand into the POV-alkoxide scaffold perturbs the electronic communication between the site-differentiated vanadium(III) ion and the cluster core. Collectively, our results provide insight into the physiochemical factors that are important during the O₂ reduction reaction at oxygen-deficient sites in reduced POV-alkoxide clusters.

A Molecular Hybrid of an Atomically Precise Silver Nanocluster and Polyoxometalates for H2 Cleavage into Protons and Electrons

Atomically precise silver (Ag) nanoclusters are promising materials as catalysts, photocatalysts, and sensors because of their unique structures and mixed-valence states (Ag⁺ /Ag⁰ ). However, their low stability hinders the in-depth study of their intrinsic reactivity and catalytic property accompanying their redox processes. Herein, we demonstrate that a molecular hybrid of an atomically precise {Ag₂₇ }¹⁷⁺ nanocluster and polyoxometalates (POMs) can efficiently cleave H₂ into protons and electrons. The Ag nanocluster accommodates electrons through the redox reaction from {Ag₂₇ }¹⁷⁺ to {Ag₂₇ }¹³⁺ , and the POM ligands play the following important roles: (i) a significant stabilization of the typically unstable Ag nanocluster to preserve its structure during the redox reaction with H₂ , (ii) formation of a unique interface between the Ag nanocluster and metal oxides for efficient H₂ cleavage, and (iii) storage of the generated protons on the negatively charged basic surface.

Challenges in transfer of gas-liquid reactions from batch to continuous operation: dimensional analysis and simulations for aerobic oxidation

The transfer of gas-liquid reactions from conventional batch processes into continuous operation using milli and micro reactors is claimed as an important step towards process intensification. Importantly, this transfer step should be realized in an early phase of process development, already, in order to minimize research efforts towards the undesired operation strategy. The main challenge of this approach, therefore, arises from lack of knowledge in the early stage of process development and the resulting system with high degrees of freedom. This contribution presents an approach to tackle this challenge by means of mathematical modelling and simulation for the aerobic oxidation of 9,10-dihydroanthracene (DHA) catalyzed by polyoxometalates (POMs) being used as example for gas-liquid reactions. The reaction was chosen as it provides sufficient complexity, since it consists of three consecutive oxidation steps of DHA and a parallel catalytic redox-cycle according to a Mars-van-Krevelen mechanism. It also provides the challenge of unknown reaction kinetics, which have been estimated in this contribution. The dimensionless balance equations for reactor modeling are derived and parametrized based on early stage experimental results obtained in batch operation mode. The discrimination between batch and continuous operation was performed by means of characteristic dimensionless numbers using the identical mathematical model for comparability reasons. The model was used to perform sensitivity studies with emphasis on the interplay between mass transfer characteristics and reaction kinetics for both the batch and continuous operation mode. The simulation results show that the performance of both operation modes mainly depend on the oxidation state of the POM catalyst, which is caused by the differences in oxygen availability. Therefore, results obtained in batch operation mode are prone to be masked by mass transfer issues, which affects catalyst and reactor development at the same time and may thus cause maldevelopments. With respect to process development it can thus be concluded that the transfer from batch to continuous operation together with mathematical modeling is important in an early phase, already, in order to detect limitations misleading the development. Finally, even simple models with roughly estimated parameters from preliminary experiments are shown to be sufficient in the early phase and can systematically be improved, in the subsequent phases.

Graphical abstract

Switchable Catalytic Polyoxometalate-Based Systems for Biomass Conversion to Carboxylic Acids

We present the Keggin-type polyoxometalate H6[PV3Mo9O40] as a switchable catalyst being able to catalyze the transformation of both glucose and glyceraldehyde to formic acid (42%) and lactic acid (40%), respectively, within 1 h reaction time by simply changing the reaction atmosphere at 160 °C from oxygen to nitrogen in one reactor setup. In detail, we report the influence of different gas atmospheres and reaction temperatures on various vanadium-containing catalysts in the selective transformation of several biogenic substrates to carboxylic acids with a special emphasis on reaction pathways and switchability of the catalyst systems. All investigations were carried out in parallel using either an oxygen or a nitrogen atmosphere of 20 bar performing time-resolved experiments between 0.25 and 5 h and a temperature variation from 160 to 200 °C. Furthermore, a catalyst and a substrate variation led to the reaction system consisting of glyceraldehyde and the Keggin-type polyoxometalates (POM) H6[PV3Mo9O40] as the best switchable reaction system under the applied conditions. This study shows interesting potential for using both Keggin-type and Lindqvist-type POMs as switchable catalysts for selective biomass conversion to platform chemicals.

A cobalt-substituted Keggin-type polyoxometalate for catalysis of oxidative aromatic cracking reactions in water

Oxidative aromatic cracking reactions in water were achieved using a catalytic system with a cobalt-substituted Keggin-type polyoxometalate as a catalyst, an Oxone® as a sacrificial oxidant and sodium bicarbonate as an additive under mild conditions.

NH3-SCR of NO with novel active, supported vanadium-containing Keggin-type heteropolyacid catalysts

Supported vanadium-substituted Keggin polyoxometalates (POMs) were applied as catalysts for the selective catalytic reduction of NO using NH₃ as reductant (NH₃-SCR).

An unprecedented cobalt(ii)-containing Wells–Dawson-type tungstovanadate-based metal–organic framework as an efficient catalyst for ring-opening polymerization of ε-caprolactone

An unprecedented organic–inorganic hybrid material based on Wells–Dawson-type tungstovanadate building blocks and cobalt(ii)–organic framework with a bis(triazole) ligand was prepared and employed to catalyze solvent-free ROP of caprolactone.

Controlled Assembly Synthesis of Atomically Precise Ultrastable Silver Nanoclusters with Polyoxometalates

Silver nanoclusters have attracted scientific interest due to their properties and applications. However, practical synthetic methods to access these materials are still limited mainly due to the low stability. Here, we report a controlled assembly strategy for fabricating atomically precise silver nanoclusters using polyoxometalates (POMs) as structure-directing as well as functionalizing units. A trefoil-propeller-shaped {Ag₂₇}¹⁷⁺ nanocluster was synthesized by assembling reactive nanoclusters supported by open-Dawson-type POMs [Si₂W₁₈O₆₆]^16-. The {Ag₂₇}¹⁷⁺ nanocluster possessed 10 delocalized valence electrons and showed unprecedented ultrastability in solutions. The cluster showed unique {Ag₂₇}-to-POM charge transfer bands in the visible light region.

Solvent-Controlled Polymerization of Molecular Strontium Vanadate Monomers into 1D Strontium Vanadium Oxide Chains

We report the polymerization of a solvent-stabilized molecular strontium vanadium oxide monomer into infinite 1D chains. Supramolecular polymerization is triggered by controlled solvent-exchange, which leads to oligomer and polymer formation. Mechanistic insights into the chain formation were obtained by solid-state, solution, and gas-phase studies. The study shows how reactivity control of molecular metal oxides can be used to assemble complex inorganic polymeric structures.

A Polyoxometalate-Based Microfluidic Device for Liquid-Phase Oxidation of Glycerol

Peroxidation of glycerol has been carried out in a polyoxometalate (POM)-based microfluidic reactor, which was fabricated on a capillary by using a layer-by-layer strategy. Lactic acid (LA) is produced selectively in high yield with a TOF as high as 20 000 h^-1 , compared to a TOF of 200 h^-1 in batch mode. This POM microfluidic reactor is readily prepared, scalable, highly stable, reusable, and also potentially applicable to selective oxidation of other bio-wastes.

Photo-redox reactivity of titanium-oxo clusters: mechanistic insight into a two-electron intramolecular process, and structural characterisation of mixed-valent Ti(iii)/Ti(iv) products

The photo-reactivity of titanium-oxo clusters is investigated, revealing an intramolecular, solvent assisted, two-electron redox process that generates blue-coloured Ti(iii)/Ti(iv) clusters.

Small titanium-oxo-alkoxide clusters, [TiO(OR)(O₂PR′₂)]₄, synthesised by the stoichiometric reaction of Ti(OⁱPr)₄, phosphinic acid and water, undergo a photo-redox transformation under long-wave UV light. The photo-reaction generates blue coloured, mixed-valence Ti(iii)/Ti(iv)-oxo clusters alongside acetone and isopropanol by-products. This reactivity indicates the ability for photoactivated charge separation to occur in even the smallest of Ti-oxo clusters. EPR and NMR spectroscopic studies support a photo-redox mechanism that occurs via an intramolecular, two-electron pathway, directly relating to current doubling effects observed at TiO₂ photoanodes in the presence of alcohols. The rate of photo-reaction is solvent dependent, with donor solvents supporting the formation of low coordinate Ti(iii) sites. The nature of the electronic transition is identified by DFT and TDDFT calculations as an oxygen to titanium charge transfer and it is possible to finetune the UV absorption onset observed by changing the phosphinate ligand. A two-electron photo-reduced cluster, [Ti₄O₄(O₂PPh₂)₆], forms spontaneously from the photo-reaction and its structure is identified by X-ray crystallography with supporting DFT calculations. These indicate that [Ti₄O₄(O₂PPh₂)₆] is high-spin and contains two ferromagnetically coupled electrons delocalised over the Ti₄ core. [Ti₄O₄(O₂PPh₂)₆] undergoes rapid oxidation in air in the solid-state and performs a remarkable single-crystal to single-crystal transformation, to form a stable cluster-superoxide salt.

Polyoxometalates as alternative Mo precursors for methane dehydroaromatization on Mo/ZSM-5 and Mo/MCM-22 catalysts

Catalytic stability and overall performance enhancement for the methane dehydroaromatization process using a combination of hexamolybdate species as Mo precursors and MCM-22 as catalysts support.

A fully reduced {VIV18O42} host and VO43−, Cl− as guest anions: synthesis, characterization and proton conductivity

Two polyoxovanadate compounds, [Na₇(H₂O)₁₄][H₈VIV18O₄₂(V^VO₄)]·N₂H₄·7H₂O and [Na₅(H₂O)₁₆][H₈VIV18O₄₂(Cl)]·4N₂H₄·6H₂O, each having fully reduced host cage and accommodating eight acidic protons per formula unit, exhibit moderate proton conductivity.

Polyoxometalate-supported metal carbonyl derivatives: from synthetic strategies to structural diversity and applications

This review aims to give an overview of the POM-supported metal carbonyl complexes obtained so far, focusing on their structural diversity and potential photochemical and catalytic properties.

A Versatile Polyoxovanadate in Diverse Cation Matrices: A Supramolecular Perspective

A series of decavanadate based compounds, formulated as [Co(H₂O)₆][{Na₄(H₂O)₁₄}{V₁₀O₂₈}]·4H₂O (1), [Zn(H₂O)₆][Na₃(H₂O)₁₄] [HV₁₀O₂₈]·4H₂O (2), [HMTAH]₂ [{Zn(H₂O)₄}₂{V₁₀O₂₈}]·2H₂O (3), [{Co(3-amp)(H₂O)₅}]₂ [3-ampH]₂ [V₁₀O₂₈] · 6H₂O (4), [4-ampH]₁₀[{Na(H₂O)₆}{HV₁₀O₂₈}][V₁₀O₂₈]·15H₂O (5), [{4-ampH}₆ {Co(H₂O)₆}₃][V₁₀O₂₈]₂·14H₂O (6), and [{4-ampH}₁₀{Zn(H₂O)₆}][V₁₀O₂₈]₂·10H₂O (7), have been synthesized (where HMTAH = mono-protonated hexamethylenetetramine, 3-ampH = protonated 3-amino pyridine and 4-ampH= protonated 4-aminopyridine) from the relevant aqueous sodium-vanadate solution, by varying the pH of the solution and amino pyridine/hexamine derivatives as well as transition metal salts (Co(II)- and Zn(II)-salts). In this series of compounds 1-7, the polyoxovanadate (POV) cluster [V₁₀O₂₈]^6- is the common cluster anion, stabilized by diverse cations. The diverse supramolecular patterns around the decavanadate cluster anion in different cationic matrices have been described to understand the microenvironment in the decavanadate-based minerals. All of these compounds have solvent water molecules in their respective crystal lattices. Since water can interact directly with cations and anions, providing an additional stability and structural diversity, we have analyzed supramolecular water structures in all these compounds to comprehend the role of the lattice water in the formation of natural decavanadate containing minerals. Compounds 1-7, that are isolated at an ambient condition from aqueous solution, are characterized by routine spectral analysis, elemental analyses and finally unambiguously by single crystal X-ray crystallography.

A Supramolecular Catalyst Self-Assembled From Polyoxometalates and Cationic Pillar[5]arenes for the Room Temperature Oxidation of Aldehydes

Oxidizing aldehydes to generate carboxylic acids is a crucial reaction in nature and in chemical industry. The aldehyde oxidation, an easily achieved process in liver cells, is inert toward autoxidation in industrial production and difficultly achieved under enzymatic condition (in water, at pH 7, at room temperature). Herein, we prepared a supramolecular catalyst which are nanospheres assembled in aqueous media by chromium centered Anderson polyoxometalates Na₃[CrMo₆O₁₈(OH)₃] (namely, CrMo₆) and cationic pillar[5]arenes (namely, P5A) with 10 positive charges which can be used as the phase transfer catalysts (PTCs). This supramolecular catalyst was exploited on aldehydes oxidation under enzymatic condition with relatively good conversion. Through DLS monitoring, the diameters of nanospheres were variable while changing the charge ratios of the ionic complexes (P5A-CrMo₆), and it is probably because of the closer charge ratios causing the more compact assemblies. Also, the nano-morphologies were monitored by TEM and SEM, and the nanostructures were characterized by zeta potential, the X-ray energy-dispersive spectroscopy (EDS), elemental analysis.

A Fully Noble Metal-Free Photosystem Based on Cobalt-Polyoxometalates Immobilized in a Porphyrinic Metal-Organic Framework for Water Oxidation

The sandwich-type polyoxometalate (POM) [(PW₉O₃₄)₂Co₄(H₂O)₂]^10- was immobilized in the hexagonal channels of the Zr(IV) porphyrinic MOF-545 hybrid framework. The resulting composite was fully characterized by a panel of physicochemical techniques. Calculations allowed identifying the localization of the POM in the vicinity of the Zr₆ clusters and porphyrin linkers constituting the MOF. The material exhibits a high photocatalytic activity and good stability for visible-light-driven water oxidation. It thus represents a rare example of an all-in-one fully noble metal-free supramolecular heterogeneous photocatalytic system, with the catalyst and the photosensitizer within the same porous solid material.

Evolutionary Metal Oxide Clusters for Novel Applications: Toward High-Density Data Storage in Nonvolatile Memories

Because of current fabrication limitations, miniaturizing nonvolatile memory devices for managing the explosive increase in big data is challenging. Molecular memories constitute a promising candidate for next-generation memories because their properties can be readily modulated through chemical synthesis. Moreover, these memories can be fabricated through mild solution processing, which can be easily scaled up. Among the various materials, polyoxometalate (POM) molecules have attracted considerable attention for use as novel data-storage nodes for nonvolatile memories. Here, an overview of recent advances in the development of POMs for nonvolatile memories is presented. The general background knowledge of the structure and property diversity of POMs is also summarized. Finally, the challenges and perspectives in the application of POMs in memories are discussed.

Polyoxometalate LUMO engineering: a strategy for visible-light-responsive aerobic oxygenation photocatalysts

We report efficient visible-light-responsive oxygenation photocatalysis via the strategy of LUMO engineering of polyoxometalates.

Fabrication of mesoporous POMs/SiO2nanofibers through electrospinning for oxidative conversion of biomass by H2O2and oxygen

The oxidation process for mesoporous H₅PMo₁₀V₂O₄₀/SiO₂nanofiber catalyst.

Post-functionalization of a photoactive hybrid polyoxotungstate

A new approach to the development of photoactive hybrid polyoxometalates is reported, combining inorganic and organic functionalisation strategies.

Measuring and Predicting the Extraction Behavior of Biogenic Formic Acid in Biphasic Aqueous/Organic Reaction Mixtures

The distribution coefficients and selectivities required for extraction purposes were predicted with a thermodynamic equation of state for the ternary system formic acid/water/extraction solvent. These predictions were validated with experimental data from the literature and experimental data from the oxidation of biomass to formic acid process measured in this work. Extraction solvents discussed in this work are 1-butanol, 1-pentanol, 1-hexanol, 1-heptanol, 1-octanol, 1-decanol, ethyl n-butyl ether, diisopropyl ether, di-n-butyl ether, benzyl formate, and heptyl formate. The considered temperature ranged from 273 to 363 K under atmospheric pressure. Perturbed-chain statistical associating fluid theory (PC-SAFT) was used for prediction purposes applying an approach as simple as possible and as complex as necessary to achieve trustworthy data for selecting the best extraction solvent. Using PC-SAFT allowed identifying 1-hexanol as the most promising solvent out of the 11 extraction agents. The predicted data were in good agreement with the experimental distribution coefficients and the selectivities, which are very sensitive to experimental uncertainties.