Semiconductor-enhanced Raman scattering: active nanomaterials and applications

Ultrasensitive detection of contaminants in milk using a novel NMS-Ag modified water-resistant paper substrate

Rapid and precise detection of harmful substances in food products is essential for ensuring public health and safety. This study introduces a novel surface-enhanced Raman spectroscopy (SERS) substrate, composed of a molybdenum disulfide‑silver nanocomposite, applied to flexible, water-resistant filter paper for detecting melamine and bisphenol A (BPA) in milk. Optimized molybdenum disulfide (NMS) nanoflowers (NFs) were synthesized through hydrothermal methods and high-temperature annealing, then modified with silver (Ag) nanoparticles to form the NMS-Ag nanocomposite (NMSA6). This substrate greatly enhances the Raman signal, achieving an enhancement factor of approximately 1.49 × 107 and a detection limit as low as 10-11 M for simultaneous multi-component analysis. Finite-difference time-domain (FDTD) simulations confirm the enhancement mechanism. The NMSA6 substrate demonstrates remarkably low detection limits for BPA and melamine, facilitating the analysis of various hazardous substances. These findings highlight the substrate's potential for highly sensitive, label-free detection, presenting a viable tool for food safety monitoring.

Cascade internal electric field dominated carbon nitride decorated with gold nanoparticles as SERS substrate for thiram assay

The development of valid chemical enhancement strategy with charge transfer (CT) for semiconductors has great scientific significance in surface-enhanced Raman scattering (SERS) technology. Herein, a phosphorus doped crystalline/amorphous polymeric carbon nitride (PCPCN) is fabricated by a facile molten salt method, and is employed as a SERS substrate for the first time. Upon the synergies of phosphatization and molten salt etching, PCPCN owns a cascaded internal electric field (IEF) due to the formation of p-n homojunction (interface-IEF) and crystalline/amorphous homojunction (bulk-IEF). The interface-IEF and bulk-IEF could effectively suppress the recombination of charge carriers and promote electron transfer between PCPCN and target methylene blue (MB), respectively. The strong CT interaction endows PCPCN substrate with superior SERS activity with an enhancement factor (EF) of 5.53 × 105. Au nanoparticles (Au NPs) are subsequently decorated on PCPCN to introduce electromagnetic enhancement for a better SERS response. The Au/PCPCN substrate allows to reliably detect trace crystal violet, as well as the thiram residue on cherry tomato. This work offers an integrated solution to enhance CT efficiency based on collaborative homojunction and internal electric field, and may inspire the design of novel semiconductor-based SERS substrates.

Advancements in reusable SERS substrates for trace analysis applications

Surface Enhanced Raman Spectroscopy (SERS) technique is an effective analytical technique in which fingerprint information about analytes can be obtained, can provide detection limit performance at the single molecule level, and analyzes are performed in a single step without any intermediate steps. SERS technique offers additional benefits rather than other analytical techniques including high selectivity, ultrasensitive detection, uncomplicated protocols, in situ sampling, on-set capability and cost-effectiveness. As a result of the combination of developments in materials and nanotechnology science with the SERS analysis technique, this technique strengthens its use advantage day by day. The most important factor that limited the use of this technique was the fact that the solution containing the desired analyte(s) was dropped onto the SERS substrate and the same substrate could not be reused in subsequent analyses. To solve this problem, scientists have focused on developing reusable SERS substrates in recent years. In these studies, scientists basically used three SERS substrate cleaning applications (1) washing the SERS substrate with a suitable solvent that can elute the analyte from SERS surface after analysis, (2) cleaning the SERS substrate with catalytic degradation of analytes after analysis by modifying them with catalytic active materials and (3) Applying plasma cleaning procedure to SERS substrate after analysis and (4) applying adsorption and desorption procedure prior to SERS analysis. Herein, the aim of this review article is to evaluate the reusable SERS substrates-based methods based on their level of development and their potential to recycle. This review offers a coherent discussion on a wide range of sensing schemes employed in fabricating the SERS substrates. We utilized a critical approach in which elaborative examples were selected to highlight key shortcomings of various experimental configurations. In the same vein, there is a discussion of the advantages and limitations concerning the key instrumental advances and the expansion of the recent methods developed in this area.

Selective SERS Sensing of R6G Molecules Using MoS2 Nanoflowers under Pressure

Pressure-induced surface-enhanced Raman spectroscopy (PI-SERS) has garnered significant attention as a subfield of SERS detection due to its capacity to regulate the band gap between molecules and substrates through pressure modulation. Currently, SERS detection primarily focuses on single molecules at atmospheric pressure with limited investigations conducted under high pressure conditions. Herein, we employed rose-shaped MoS2 nanoflowers as the SERS substrate and realized selective PI-SERS enhancement of R6G molecules in the binary (MV+R6G) and ternary (MV+R6G+RhB) systems. The MoS2 demonstrated an exceptionally low SERS detection limit of 5 × 10-6 M in binary and ternary systems with equimolar amounts of molecules. High-pressure experimental results indicate that MoS2 displays selective enhancement for R6G molecules, as evidenced by the comparison of the PI-SERS peak intensity ratio between MoS2 and the probe molecules. The proposed enhancement mechanism in binary and ternary SERS systems under high pressure involves pressure-induced changes in both the band structures of the MoS2 substrate and molecules, thereby influencing their charge transfer dynamics. Consequently, this approach holds great promise for practical applications in complex SERS systems operating under extreme conditions.

One-step fabrication of a self-driven point-of-care chip by femtosecond laser direct writing and its application in cancer cell H2O2 detection via semiconductor-based SERS

Self-driven microfluidic systems have attracted significant attention and demonstrated great potential in the field of point-of-care (POC) testing due to their device simplicity, low power consumption, increased portability, and reduced sample consumption. To develop POC detection chips with diverse characteristics that meet different requirements, there is a strong demand for feasible strategies that enable easy operation and reduce processing time. Here, a one-step processing approach using femtosecond laser direct writing technology was proposed to fabricate a capillary-actuated POC microfluidic chip. The driving force of the chip is highly dependent on its surface wettability, which can be easily adjusted by changing the laser processing parameters. This POC microfluidic chip allowed for the detection of intracellular H2O2 through a catalytic reaction system that incorporated 5-aminosalicylic acid -sensitized colloidal TiO2 nanoparticles and horse radish peroxidase, with integrating semiconductor-based surface-enhanced Raman scattering (SERS) quantitative technique. The concentration of H2O2 was determined by the SERS signal of the catalytic products in the microfluidic chip, resulting in rapid detection with minimal sample consumption. Our method provides a simple, feasible, and alternative strategy for POC testing of H2O2, with a linear range of 10-2∼10-6 M and a limit of detection of 0.55 μM. This approach was successfully applied to rapid detection of intracellular H2O2 in MCF-7 breast cancer cells with high sensitivity and minimal sample consumption. Additionally, this study not only demonstrates the exceptional advantages of femtosecond laser processing technology in fabricating diverse microfluidic chips for various applications, but also presents an efficient POC testing strategy for detecting cell signaling molecules.

In situ surface-enhanced Raman spectroscopy for membrane protein analysis and sensing

Membrane proteins are involved in a variety of dynamic cellular processes and exploration of the structural basis of membrane proteins is of significance for a better understanding of their functions. In situ analysis of membrane proteins and their dynamics is, however, challenging for conventional techniques. Surface-enhanced Raman spectroscopy (SERS) is powerful in protein structural characterization, allowing for sensitive, in-situ and real-time identification and dynamic monitoring under physiological conditions. In this review, the applications of SERS in probing membrane proteins are outlined, discussed and prospected. It starts with a brief introduction to membrane proteins, SERS theories and SERS-based strategies that commonly-used for membrane proteins. How to assemble phospholipid biolayers on SERS-active materials is highlighted, followed by respectively discussing about direct and indirect strategies for membrane protein sensing. SERS-based monitoring of protein-ligand interactions is finally introduced and its potential in biomedical applications is discussed in detail. The review ends with critical discussion about current challenges and limitations of this research field, and the promising perspectives in both fundamental and applied sciences.

Impact of Graphene Oxide on SERS Enhancement of Arylated Gold Nanospheres: Mechanistic Insight

The performance of gold nanospheres as substrates for surface-enhanced Raman spectroscopy (SERS) investigation has been compromised by their low adsorption efficiency, high colloidal dispersibility, and diminishing hot spots. However, gold nanosphere substrates modified using aryldiazonium gold(III) chemistry via durable gold-carbon bonds are promising for SERS enhancement due to their controlled organic layer density. In this study, arylated gold nanospheres AuNSs-COOH have shown SERS enhancement when incorporated into graphene oxide (GO) to form nanocomposites (NCs) labeled AuNSs-COOH/GO (AuNCs). Our investigation using X-ray photoelectron spectroscopy (XPS) surface analysis showed that the gold-aryl nanospheres reached their maximum SERS enhancement with an optimal coating. The evaluation included the Au 4f chemical environment and compact graphitic layers for the SERS substrate optimization. The fabricated AuNC substrates demonstrated superior efficiency and reproducibility. A broad linear range of 10-3-10-7 M 4-nitrophenol detection was obtained with exceptional repeatability, as evidenced by the relative standard deviation (RSD) of 9.32%. A detailed investigation of the energy profiles, particularly the valence band maximum (VBM) and band gap values of the substrate and analyte, depicted the electromagnetic (EM) and charge-transfer-induced enhancement and the role of GO inclusion in substrate efficiency in SERS enhancement mechanisms. The finite-difference time domain (FDTD) simulation results revealed that AuNCs incorporated with graphitic nanostructures exhibited the most substantial SERS effect through an EM field enhancement mechanism. This study demonstrated significant SERS enhancement using gold-aryl nanospheres when modified with GO, in contrast to the typical reliance on anisotropic nanostructures.

Plasmon-Free Surface-Enhanced Raman Spectroscopy Using α-Type MoO3 Semiconductor Nanorods with Strong Light Scattering in the Visible Regime

Recent developments in semiconductor-based surface-enhanced Raman scattering (SERS) have achieved numerous advancements, primarily centered on the chemical mechanism. However, the role of the electromagnetic (electromagnetic mechanism) contribution in advancing semiconductor SERS substrates is still underexplored. In this study, we developed a SERS substrate based on densely aligned α-type MoO3 (α-MoO3) semiconductor nanorods (NRs) with rectangular parallelepiped ribbon shapes with width measuring several hundred nanometers. These structural attributes strongly affect light transport in the visible range by multiple light scattering generated in narrow gaps between NRs, contributing to the improvement of SERS performance. Engineering the nanostructure and chemical composition of NRs realized high SERS sensitivity with an enhancement factor of 2 × 108 and a low detection limit of 5 × 10-9 M for rhodamine 6G (R6G) molecules, which was achieved by the stoichiometric NR sample with strong light scattering. Furthermore, it was observed that the scattering length becomes significantly shorter compared with the excitation wavelength in the visible regime, which indicates that light transport is strongly modified by mesoscopic interference related to Anderson localization. Additionally, high electric fields were found to be localized on the NR surfaces, depending on the excitation wavelength, similar to the SERS response. These optical phenomena indicate that electromagnetic excitation processes play an important role in plasmon-free SERS platforms based on α-MoO3 NRs. We postulate that our study provides important guidance for designing effective EM-based SERS-active semiconductor substrates.

Mechanism Switch in Surface-Enhanced Raman Scattering: The Role of Nanoparticle Dimensions

Surface-enhanced Raman scattering (SERS) is renowned for amplifying Raman signals, with electromagnetic mechanism (EM) enhancement arising from localized surface plasmon resonances and chemical mechanism (CM) enhancement as a result of charge transfer interactions. Despite the conventional emphasis on EM as a result of plasmonic effects, recent findings highlight the significance of CM when noble metals appear as smaller entities. However, the threshold size of the noble metal clusters/particles corresponding to the switch in SERS mechanisms is not clear at present. In this work, the VSe2-xOx/Au composites with different Au sizes are employed, in which a clear view of the SERS mechanism switch is observed at the Au size range of 16-21 nm. Our findings not only provide insight into the impact of noble metal size on SERS efficiency but also offer quantitative data to assist researchers in making informed judgments when analyzing SERS mechanisms.

Nanoparticle assembly by transient topography induced by applying soft lithography to block copolymer films

We present a simple approach for patterning metal nanoparticles into periodic superstructures on flat films spanning centimeter-square areas. Our approach is based on capillary force lithography, a soft lithography method that is used to impart topography to molten polymer films, and applies it to block copolymer films to obtain substrates featuring both topographic and chemical contrasts that can serve as templates for the selective deposition of nanoparticles. Here we show that flattening the films by exposure to solvent vapour prior to nanoparticle deposition not only retains chemical heterogeneity but also provides access to unique hierarchically-organized nanoparticle superstructures that are unattainable by other methods. Such structures could be useful for optical, sensor, and catalytic applications.

In-situ surface enhanced Raman spectroscopy revealing the role of metal-organic frameworks on photocatalytic reaction selectivity on highly sensitive and durable Cu-CuBr substrate

Photocatalytic reactions using copper-based nanomaterials have emerged as a new paradigm in green technology. Selective photocatalysis is very important for improving energy utilization efficiency, and in order to directional improve catalytic selectivity, it is necessary to understand the mechanism of interfacial reactions at the molecular level. Therefore, a unique bifunctional Cu-CuBr substrate is first fabricated via an electrochemical method, which overcomes the instability of traditional copper-based materials and endows high surface-enhanced Raman spectroscopy (SERS) sensitivity and photocatalytic performance and can be stored stably for more than a year. Further modification of the surface with Metal-Organic Frameworks (MOFs) containing carboxyl functional groups can significantly tune the surface properties of the substrate. This increases the adsorption of cationic dyes to improve the SERS effect, and 10-10 M methylene blue can easily be detected with this substrate. Surprisingly, in-situ SERS monitoring of the interfacial photocatalytic dehalogenation reaction of aromatic halides through its intrinsic SERS effect reveal two competing selective reaction pathways, self-coupling and hydrogenation. Typically, the SERS spectra reveal that the latter's selectivity was greatly enhanced after MOFs modification, and the yield rate of the hydrogenated product increased from 27.6 % to 46.9 % (selectivity increased from 32.7 % to 51.5 %). This proves that the surface properties of catalysts, especially the affinity for reaction intermediates, can effectively regulate catalytic selectivity.

A review of clinical use of surface-enhanced Raman scattering-based biosensing for glioma

Glioma is the most common malignant tumor of the nervous system in recent centuries, and the incidence rate of glioma is increasing year by year. Its invasive growth and malignant biological behaviors make it one of the most challenging malignant tumors. Maximizing the resection range (EOR) while minimizing the impact on normal brain tissue is crucial for patient prognosis. Changes in metabolites produced by tumor cells and their microenvironments might be important indicators. As a powerful spectroscopic technique, surface-enhanced Raman scattering (SERS) has many advantages, including ultra-high sensitivity, high specificity, and non-invasive features, which allow SERS technology to be widely applied in biomedicine, especially in the differential diagnosis of malignant tumor tissues. This review first introduced the clinical use of responsive SERS probes. Next, the sensing mechanisms of microenvironment-responsive SERS probes were summarized. Finally, the biomedical applications of these responsive SERS probes were listed in four sections, detecting tumor boundaries due to the changes of pH-responsive SERS probes, SERS probes to guide tumor resection, SERS for liquid biopsy to achieve early diagnosis of tumors, and the application of free-label SERS technology to detect fresh glioma specimens. Finally, the challenges and prospects of responsive SERS detections were summarized for clinical use.

Reversible Thermoelectric Regulation of Electromagnetic and Chemical Enhancement for Rapid SERS Detection

Actively controlling surface-enhanced Raman scattering (SERS) performance plays a vital role in highly sensitive detection or in situ monitoring. Nevertheless, it is still challenging to achieve further modulation of electromagnetic enhancement and chemical enhancement simultaneously in SERS detection. In this study, a silver nanocavity structure with graphene as a spacer layer is coupled with thermoelectric semiconductor P-type gallium nitride (GaN) to form an electric-field-induced SERS (E-SERS) for dual enhancement. After applying the electric field, the intensity of SERS signals is further enhanced by over 10 times. The thermoelectric field enables fast and reproducible doping of graphene, thereby modulating its Fermi level over a wide range. The thermoelectric field also regulates the position of the plasmon resonance peak of the silver nanocavity structure, rendering synchronous dual electromagnetic and chemical regulation. Additionally, the method enables the trace detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A detailed theoretical analysis is performed based on the experimental results and finite-element calculations, paving the way for the fabrication of high-efficient E-SERS substrates.

Unique gap-related SERS behaviors ofp-aminothiophenol molecules absorbed on TiO2surface in periodic TiO2/Ni nanopillar arrays

We observed a unique interpillar gap-related surface-enhanced Raman scattering (SERS) behavior ofp-aminothiophenol (PATP) molecules from periodic TiO2nanopillar arrays with three gap sizes of 191, 297 and 401 nm, which is completely different from that on Ag and Ni nanopillar arrays. Especially, the gap-size-dependent charge-transfer (CT) resonance enhancement from TiO2/Ni has been indicated through comparisons of variation trend of SERS intensities with inter-pillar gap size between TiO2/Ni and Ag/TiO2/Ni as well as Ni nanoarrays, and been confirmed by spectra of ultraviolet-visible absorption and photoluminescence. Results demonstrate that the CT resonance enhancement is more susceptible to the change of the gap size compared with the surface plasmon resonance (SPR) enhancement in TiO2/Ni nanoarrays. Hence, SPR and CT enhancement showing different variation trend and rate with the gap size that leads to a different relative contribution of CT resonance to the overall SERS enhancement as gap size changes, and consequently results in a unique gap-related SERS behavior for TiO2/Ni nanoarrays. The present study is not only helpful for investigating SERS mechanism for semiconductors but also providing a method to design and optimize periodic metal/semiconductor SERS substrates in a controllable way.

AgTNP@TiO2@Ag core-satellite composites for sensitive sensing and in situ monitoring photodegradation of organic dyes by portable Raman spectrometer

The development of sensitive, reliable, and robust substrates for surface-enhanced Raman spectroscopy (SERS) heavily relies on the creation of numerous hot spots. In this study, we propose a simple approach to fabricate core-satellite composites composed of AgTNP@TiO2@Ag, where Ag triangular nanoplates (AgTNPs) act as the cores, TiO2 serves as the interlayer, and Ag nanoparticles are deposited around them to form Ag satellites. By adjusting the amount of AgNO3, we precisely control the coverage of Ag nanoparticles on AgTNP@TiO2@Ag, thus fine-tuning their SERS sensitivity. Various characterization techniques were employed to examine their composition, morphology, and crystal structure. Thanks to the abundant hot spots created by the Ag satellites, these composites exhibit significantly enhanced SERS sensitivity and they demonstrate the capability to detect methylene blue (MB) at a concentration of 10-10 M by portable Raman spectrometer. Moreover, the AgTNP@TiO2@Ag composites effectively enable in situ SERS monitoring of the photodegradation reaction of MB. Overall, the novel AgTNP@TiO2@Ag composites prepared in this study exhibit high SERS sensitivity and excellent photocatalytic performance, making them highly valuable for environmental detection and ecological restoration purposes.

A new semiconductor heterojunction SERS substrate for ultra-sensitive detection of antibiotic residues in egg

Antibiotic residues in animal-derived food (egg) are threatening human health. Semiconductor heterojunction surface-enhanced Raman scattering (SERS) substrates can be used for ultra-sensitive detection of antibiotic residues in egg. Here, a TiO2/ZnO heterojunction was developed as a new SERS substrate based on an interface engineering strategy. Due to strong interfacial coupling and efficient carrier separating in heterostructure, utilization rate of photo-induced electrons in substrate was improved greatly, which realized the efficient charge transfer in substrate-molecule system, resulting in a prominent SERS enhancement. Taking the detection of enrofloxacin residue in egg as an example, the limit of detection (LOD) is only 13.1 μg/kg, which is far below the European Union standard, and lower than LODs of other conventional analytical methods and existing noble metal-based SERS methods. More importantly, benefiting from high sensitivity and selectivity of heterojunction and fingerprint characteristics of SERS, multiple antibiotic residues in egg can be identified simultaneously.

Noble metal-free SERS: mechanisms and applications

Surface-enhanced Raman scattering (SERS) is a very important tool in vibrational spectroscopy. The coupling of nanomaterials induces local surface plasmon resonance (LSPR), which contributes greatly to SERS. Due to its remarkable sensitivity in trace detection, SERS has gained prominence in the fields of catalysis, biosensors, drug tracking, and optoelectronic devices. SERS activity is believed to be closely related to the LSPR and charge transfer (CT) of the material. Noble metal nanostructures have been commonly used as SERS-active substrates due to their strong local electric fields and relatively mature preparation, application, and enhancement mechanisms. In recent years, SERS research based on semiconductor materials has attracted significant attention because semiconductor materials have advantages such as repeatable preparation, simple pretreatment, stable SERS spectra and superior biocompatibility, stability, and reproducibility. Semiconductor-based SERS has the potential to enrich SERS theory and applications. Thus, the development of semiconductor materials will introduce a new epoch for SERS-based research. In this review, we outline the two main kinds of semiconductor SERS-active substrates: inorganic and organic semiconductor SERS-active substrates. We also provide an overview of the SERS mechanism for different kinds of materials and SERS-based applications.

Study of charge transfer contribution in Surface-Enhanced Raman scattering (SERS) based on indium oxide nanoparticle substrates

Surface-enhanced Raman scattering (SERS) has outstanding merits in biochemical molecular analysis, and the development of new SERS substrates is the focus of research. Herein, In2O3 nanoparticles (NPs) were synthesized by a high temperature pyrolysis method with cubic phase and small particle size at 10 nm. The structures and properties of In2O3 NPs were characterized by X-ray powder diffraction (XRD), transmission electron microscope (TEM) and other characterization methods. Additionally, the SERS spectra of In2O3-MBA with the enhancement factor (EF) up to 1.22 × 104 is discussed. The results demonstrate that there is a charge transfer (CT) effect revealed between the adsorbed molecules of 4-mercaptobenzoic acid (4-MBA) and the substrates of In2O3 NPs, and it could be excited by long wavelength energy. Based on the In2O3 NPs, the study is beneficial to develop more potential semiconductor SERS substrates.

Controllable preparation of Ti3C2Tx/Ag composite as SERS substrate for ultrasensitive detection of 4-nitrobenzenethiol

Currently, metal carbonitride (MXene) has been identified as a hot research topic in the research area of surface-enhanced Raman scattering (SERS). In this study, Ti3C2Tx/Ag composite was fabricated as SERS substrate with different Ag contents. The fabricated Ti3C2Tx/Ag composites show good SERS behavior by detecting 4-Nitrobenzenethiol (4-NBT) probe molecules. Through calculation, the SERS enhancement factor (EF) of the Ti3C2Tx/Ag substrate was as high as 4.15 × 106. It is worth noting that the detection limit of 4-NBT probe molecules can be achieved ultralow concentration of 10-11 M. In this system, electromagnetic enhancement mechanism and chemical enhancement mechanism have synergistic effects on SERS phenomenon. Meanwhile, the Ti3C2Tx/Ag composite substrate exhibited good SERS reproducibility. In addition, the SERS detection signal hardly changed after 6 months of natural standing, and the substrate showed good stability. This work suggests that the Ti3C2Tx/Ag substrate could be used as a sensitivity SERS sensor for practical application, and could be applied in the field of environmental monitoring.

Magnetic ZnFe2O4 composite advances SERS assay for Patent blue V

BACKGROUND

Patent blue V (PbV) an Azo colorant because of its high toxicity to children has been severely limited in food industry. However, frequently the abuse of PbV in some artificial foods is still exposed by media. Current methods for the detection of PbV have to perform tedious pre-processing and the detection sensitivity and speed are required to be further improved.

RESULTS

In this work, we immobilize gold nanoparticles (Au NPs) on the surface of ZnFe2O4 with aid of Inositol hexaphosphate (IP6) to prepare a novel magnetic surface-enhanced Raman scattering (SERS) substrate (designated as ZnFe2O4-IP6-Au NPs) for rapid detection of PbV in beverages. Synergistic effect of magnetic enrichment, magnetic inducing improvement effect (MIIE) and efficient charge transfer (CT) enables ZnFe2O4-IP6-Au NPs-based SERS assay to achieve limit of detection of PbV down to 1.31 × 10-8 mol/L and a concentration linear relationship ranging from 8.6 × 10-4 to 8.6 × 10-8 mol/L. The detection recoveries for PbV in beverages locate in the range from 98.1 to 102.5 %, meaning the feasibility of method. In addition, the presence of IP6 protection greatly improves the storage stability of ZnFe2O4-IP6-Au NPs.

SIGNIFICANCE

ZnFe2O4-IP6-Au NPs substrates with excellent SERS performance could on-site, rapidly and sensitively detect PbV. As a perspective, magnetic-composite-based SERS assay has great scenario in food safety by using portable Raman spectrometer.

A dense SERS substrate of the AgNPs@GO compound film for detecting homocysteine molecules

This study focuses on the development of a highly sensitive surface-enhanced Raman scattering (SERS) sensor for detecting homocysteine (Hcy) molecules. The Hcy sensor was created by depositing silver nanoparticles (AgNPs) onto the surface of graphene oxide (GO) film to form a dense AgNPs@GO composite film. The AgNPs on the composite film interacted with sulfur atoms (S) of Hcy molecules to form Ag-S bonds, which boosted the chemisorption of Hcy molecules and enabled them to be specifically recognized. The SERS sensor exhibited a maximum enhancement factor of up to 1.1 × 104, with a reliable linear response range from 1 to 60 ng mL-1. The limit of detection (LOD) for Hcy molecules was as low as 1.1 × 10-9 M. Moreover, Hcy molecules were successfully distinguished in a mixed solution of γ-aminobutyric acid and Hcy molecules. In this study, a simple preparation process of SERS substrate and a novel detection method for Hcy molecules provided a new pathway for the rapid and effective detection of Hcy molecules in the food and biomedicine fields.

Raman, UV-Vis Absorption, and Fluorescence Spectroelectrochemistry for Studying the Enhancement of the Raman Scattering Using Nanocrystals Activated by Metal Cations

Raman signal enhancement is fundamental to develop different analytical tools for chemical analysis, interface reaction studies, or new materials characterization, among others. Thus, phenomena such as surface-enhanced Raman scattering (SERS) have been used for decades to increase the sensitivity of Raman spectroscopy, leading to a huge development of this field. Recently, an alternative method to SERS for the amplification of Raman signals has been reported. This method, known as electrochemical surface oxidation-enhanced Raman scattering (EC-SOERS), has been experimentally described. However, to date, it has not yet been fully understood. In this work, new experimental data that clarify the origin of the Raman enhancement in SOERS are provided. The use of a complete and unique set of combined spectroelectrochemistry techniques, including time-resolved operando UV-vis absorption, fluorescence, and Raman spectroelectrochemistry, reveals that such enhancement is related to the generation of dielectric or semiconductor nanocrystals on the surface of the electrode and that the interaction between the target molecule and the dielectric substrate is mediated by metal cations. According to these results, the interaction metal electrode-nanocrystal-metal cation-molecule is proposed as being responsible for the Raman enhancement in Ag and Cu substrates. Elucidation of the origin of the Raman enhancement will help to promote the rational design of SOERS substrates as an attractive alternative to the well-known SERS phenomenon.

Sub-70 nm surface structures on femtosecond laser irradiated GaAs in distilled water and sensing application

This study reveals the possibility of distinct ablation mechanisms at different radial positions of the ablated track on GaAs when ablated with femtosecond pulses in distilled water. From the center to the edges of the ablated track, fascinating features such as micron-sized cones, nano-pores, and nano-ripple trenches (average size of 60-70 nm) were observed. The requirement for simulations incorporating the variations in a Gaussian beam fluence and dynamics of the melt flow/surrounding media is discussed. Deep-subwavelength structures, i.e., nano-ripple trenches with a ripple size of ∼λ/11 are achieved on the GaAs surface in this study. Further, these GaAs surface structures acted as excellent hybrid surface-enhanced Raman spectroscopy platforms upon gold coating.

Determination of uric acid in serum by SERS system based on VO-MnCo2O4/Ag nanozyme

The level of uric acid is crucial to human health. Octahedral oxygen vacancy MnCo₂O₄/Ag (V_O-MnCo₂O₄/Ag) nanozyme was successfully prepared by simple hydrothermal, calcination and self-reduction methods. V_O-MnCo₂O₄/Ag nanozyme is rich in Mn²⁺/Mn³⁺ and C_O²⁺/C_O³⁺ redox electron pairs, large specific surface area and oxygen vacancies. V_O-MnCo₂O₄/Ag nanozyme showed high uricase-like activity and peroxidase-like activity. At the same time, the SERS signal of the detected molecule could be significantly enhanced after the catalytic reaction of the V_O-MnCo₂O₄/Ag nanozyme. The K_m values of V_O-MnCo₂O₄/Ag nanozyme for H₂O₂ and TMB were 0.04 mM and 0.027 mM respectively. Based on the uric acid oxidase-like and peroxidase-like activities of V_O-MnCo₂O₄/Ag, we developed a label-free, sensitive, and reliable SERS uric acid detection system. The detection linear range of uric acid is 0.01 μM-1000 μM and the detection of limit is 7.8 × 10^-9 M. The results show that the sensing system has good accuracy, sensitivity, selectivity, and stability. It can be applied to the determination of samples under different conditions. This study provides profound insights into the design of enzyme-like activity regulation and SERS properties regulation of nanozymes, provides guidance for the study of reaction kinetics and catalytic mechanism of nanozymes, and has broad application prospects in the field of nanozymes and SERS sensing analysis.

Recent advances of ratiometric sensors in food matrices: mycotoxins detection

The public health problem caused by mycotoxins contamination has received a great deal of attention worldwide. Mycotoxins produced by filamentous fungi widely distributed in foodstuffs can cause adverse impacts on humans and livestock, posing serious health threats. Particularly worth mentioning is that mycotoxins can accumulate in organisms and be enriched through the food chain. Improving early trace detection and control from the source is a more desirable approach than the contaminated food disposal process to ensure food safety. Conventional sensors are susceptible to interference from various components in intricate food matrices when detecting trace mycotoxins. The application of ratiometric sensors avoids signal fluctuations, and reduce background influences, which casts new light on developing sensors with superior performance. This work is the first to provide an overview of the recent progress of ratiometric sensors in the detection of mycotoxins in intricate food matrices, and highlight the output types of ratiometric signal with respect to accurate quantitative analysis. The prospects of this field are also included in this paper and are intended to have key ramifications on the development of sensing detection conducive to food safety.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Detecting nanoparticles by "listening"

In the macroscopic world, we can obtain some important information through the vibration of objects, that is, listening to the sound. Likewise, we can also get some information of the nanoparticles that we want to know by the means of "listening" in the microscopic world. In this review, we will introduce two sensing methods (cavity optomechanical sensing and surface-enhanced Raman scattering sensing) which can be used to detect the nanoparticles. The cavity optomechanical systems are mainly used to detect sub-gigahertz nanoparticle or cavity vibrations, while surface-enhanced Raman scattering is a well-known technique to detect molecular vibrations whose frequency generally exceeds terahertz. Therefore, the vibrational information of nanoparticles from low-frequency to high-frequency could be obtained by these two methods. The size of the viruses is at the nanoscale and we can regard it as a kind of nanoparticles. Rapid and ultrasensitive detection of the viruses is the key strategies to break the spread of the viruses in the community. Cavity optomechanical sensing enables rapid, ultrasensitive detection of nanoparticles through the interaction of light and mechanical oscillators and surface-enhanced Raman scattering is an attractive qualitatively analytical technique for chemical sensing and biomedical applications, which has been used to detect the SARS-CoV-2 infected. Hence, investigation in these two fields is of vital importance in preventing the spread of the virus from affecting human's life and health.

Surface-Enhanced Raman scattering (SERS) filter paper substrates decorated with silver nanoparticles for the detection of molecular vibrations of Acyclovir drug

Acyclovir (ACV) drug, a common antiviral agent, is frequently used as the primary clinical treatment method for treating hepatitis B, herpes simplex, and varicella zoster viruses due to its potent therapeutic effect. In patients with compromised immune systems, this medication can stop cytomegalovirus infections, and high doses of this drug are required; however, such prescription leads to kidney toxicity. Therefore, timely and accurate detection of ACV is crucial in many areas. Surface-Enhanced Raman Scattering (SERS) is a reliable, rapid, and precise approach for the identification of trace biomaterials and chemicals. Filter paper substrates decorated with silver nanoparticles (AgNPs) were applied as SERS biosensors to detect ACV and control its adverse effects. Initially, a chemical reduction procedure was utilized to produce AgNPs. Afterward, UV-Vis, FE-SEM, XRD, TEM, DLS, and AFM were employed to examine the properties of prepared AgNPs. In order to prepare SERS-active filter paper substrates (SERS-FPS) to detect Molecular vibrations of ACV, AgNPs prepared by immersion method were coated on filter paper substrates. Moreover, the UV-Vis DRS analysis was carried out to assess the stability of filter paper substrates and SERS-FPS. The AgNPs reacted with ACV after being coated on SERS-active plasmonic substrates and could sensitively detect ACV in small concentrations. It was discovered that the limit of detection of SERS plasmonic substrates was 10^-12 M. Moreover, the mean RSD for ten repeated tests was calculated as 4.19%. The enhancement factor for detecting ACV using the developed biosensors was calculated to be 3.024 × 10⁵ and 3.058 × 10⁵ experimentally and via simulation, respectively. According to the Raman results, SERS-FPS for the detection of ACV, fabricated by the present methods, showed promising results for SERS-based investigations. Furthermore, these substrates showed significant disposablity, reproducibility, and chemical stability. Therefore, the fabricated substrates are capable to be employed as potential SERS biosensors to detect trace substances.

ZnO nanorods decorated with Ag nanoflowers as a recyclable SERS substrate for rapid detection of pesticide residue in multiple-scenes

Pesticide residues threaten the ecological environment and human health. Therefore, developing high performance SERS substrate to achieve highly sensitive detection of pesticide residues is meaningful. In this study, based on the strategy of combining "hot spots" engineering and material hybridization, we construct a novel hybrid SERS substrate by depositing Ag nanoflowers (NFs) on ZnO nanorods (NRs). Benefiting from the synergistic effect of electromagnetic enhancement and charge transfer effect, the Ag NFs@ZnO NRs substrate exhibits a low detection limit (10^-13 M) for crystal violet molecules. This SERS substrate has good uniformity with a relative standard deviation of 7.463 %. Besides, owning to the photocatalytic property of ZnO NRs, the hybrid substrate can degrade probe molecules after SERS detection and realize recyclability. As a demonstration, we employed our SERS substrate for the trace detection of pesticide residues on apple surface and in river water. This study provides a new idea for improving the SERS performance of hybrid substrates.

Spotting the driving forces for SERS of two-dimensional nanomaterials

Recently, two-dimensional (2D) layered nanomaterials have become promising candidates for surface-enhanced Raman scattering (SERS) substrates due to their unique characteristics of ultrathin layer structure, outstanding optical properties and good biocompatibility, significantly contributing to remarkable SERS sensitivity, stability, and compatibility. Unlike traditional SERS substrates, 2D nanomaterials possess unparalleled layer-dependent, phase transition induced and anisotropic optical properties, which as driving forces significantly promote the SERS performance and development, as well as greatly enrich the SERS substrates and provide versatile resources for SERS research. For a profound understanding of the SERS effect of 2D nanomaterials, a review concentrating on these driving forces for SERS enhancement on 2D nanomaterials is written here for the first time, which strongly emphasizes the importance and influence of these driving forces on the SERS effect of 2D nanomaterials, including their intrinsic physical and chemical properties and external influencing factors. Moreover, the essential mechanisms of these driving forces for the SERS effect are also elaborated systematically. Finally, the challenges and future perspectives of SERS substrates based on 2D nanomaterials are concluded. This review will provide guiding principles and strategies for designing highly sensitive 2D nanomaterial SERS substrates and extending their potential applications based on SERS.

Improved charge-transfer resonance in graphene oxide/ZrO2 substrates for plasmonic-free SERS determination of methyl parathion

This work reports a sensitive SERS substrate based on graphene oxide (GO) and quantum-sized ZrO₂ nanoparticles (GO/ZrO₂) for label-free determination of the organophosphate pesticide methyl parathion (MP). The enhanced light-matter interactions and the consequent SERS effect in these substrates resulted from the effective charge transfer (CT) mechanism attributed to synergistic contributions of three main factors: i) the strong molecular adherence of the MP molecules and the ZrO₂ surface which allows the first layer-effect, ii) the relatively abundant surface defects in low dimensional ZrO₂ semiconductor NPs, which act as intermediate electronic states that reduce the large bandgap barrier, and iii) the hindered charge recombination derived from the transference of the photoinduced holes to the GO layer. This mechanism allowed an enhancement factor of 8.78 × 10⁴ for GO/ZrO₂-based substrates, which is more than 5-fold higher than the enhancement observed for platforms without GO. A detection limit of 0.12 μM was achieved with an outstanding repeatability (variation ≤4.5%) and a linear range up to 10 μM, which is sensitive enough to determine the maximal MP concentration permissible in drinking water according to international regulations. Furthermore, recovery rates between 97.4 and 102.1% were determined in irrigation water runoffs, strawberry and black tea extracts, demonstrating the reliability of the hybrid GO/ZrO₂ substrate for the organophosphate pesticides quantification in samples related to agri-food sectors and environmental monitoring.

CdSSe Nano-Flowers for Ultrasensitive Raman Detection of Antibiotics

Surface-enhanced Raman scattering (SERS) technique is widely used for the highly sensitive detection of trace residues due to its unparalleled signal amplification ability and plays an important role in food safety, environmental monitoring, etc. Herein, CdSSe nano-flowers (CdSSe NFs) are synthesized via the chemical vapor deposition (CVD) method. CdSSe NFs thin film is used as a SERS substrate with an ultralow limit of detection (LOD, 10−14 M), high apparent enhancement factor (EF, 3.62 × 109), and excellent SERS stability (relative standard deviation, RSD = 3.05%) for probe molecules of Rh6G. Further, CdSSe NFs substrate is successfully applied in the sensitive, quantitative, and label-free analysis of ciprofloxacin (CIP) and enrofloxacin (ENR) antibiotics, which exhibit LODs of below 0.5 ppb. This excellent SERS platform may be widely utilized for sensitive life science and environmental sensing.

Multiplex signal amplification strategy-based early-stage diagnosis of Parkinson's disease on a SERS-enabled LoC system

In this paper, a multiplex signal amplification strategy was developed for the determination of miR-214 and miR-221 on a surface-enhanced Raman scattering (SERS)-enabled lab-on-a-chip (LoC) system to realize the early-stage diagnosis of Parkinson's disease (PD). The gold nanobipyramids (GNBPs) with great monodispersity were functionalized with Raman reporter molecules and hairpin DNA 1, serving as the SERS nanotags. The presence of targets can initial the strand displacement amplification (SDA) reaction and the numerous short-stranded trigger DNA (tDNA) can be released under the action of polymerase and nicking enzyme. Then, the tDNA can trigger the catalytic hairpin assembly (CHA) event between the SERS nanotags and the capture nanoprobes (Magnetic beads (MBs) modified with hairpin DNA 2), resulting in the aggregation of GNBPs on the MBs surface. The multiplex signal amplification contributed by the SDA-CHA strategy and the magnet-induced aggregation effect can ultimately lead to the significant improvement of the detection sensitivity and the limit of detection (LOD) was low to aM level with reproducibility and specificity meanwhile. Furthermore, a MPTP-induced PD mice model was established to verify the practicability and the expression level of miR-214 and miR-221 at different stages analyzed with the LoC system was confirmed by qRT-PCR.

To dimerize or not: para-aminothiophenol on a bismuth heterostructure

Surface enhanced Raman spectroscopy (SERS) of p-aminothiophenol (PATP) was investigated on β-Bi₂O₃/Bi₂O₂CO₃ nanoparticles, a novel bismuth based metal substrate with the lowest limit of detection of 1 mM. Unlike on noble metal surfaces where PATP gets converted to p,p'-dimercaptoazobenzene (DMAB) due to photocatalytic coupling, no such transformation of PATP was observed on β-Bi₂O₃/Bi₂O₂CO₃ nanoparticles. Density functional theory (DFT) calculations at the PW91PW91/LANL2DZ/6-311+G(d,p) level of theory supported the experimental results exceedingly well. Also, the charge transfer direction from PATP to β-Bi₂O₃/Bi₂O₂CO₃ nanoparticles was revealed by the projected density of states calculation.

Au@Ag nanodome-cones array substrate for efficient residue analysis of food samples by surface-enhanced Raman scattering

A bioinspired Au@Ag nanodome-cones array (Au@Ag NDCA) surface-enhanced Raman scattering (SERS) chip was developed for efficient residue analyses of food samples. The cicada wing inspired Au@Ag NDCA chip was fabricated by a bottom-up method, Au nanocones array was firstly grown onto nickel foil by displacement reaction and cetyltrimethylammonium bromide guidance growth, and then silver shell with controllable thickness was coated onto the Au nanocones array by magnetron sputtering. The Au@Ag NDCA chip exhibited good SERS performances with high enhancement factor of 1.2 × 10⁸, good uniformity with relative standard deviation (RSD) less than 7.5% (n = 25), good inter-batch reproducibility with RSD less than 9.4% (n = 9), and long-term stability over 9 weeks. By adapting a minimized sample preparation, Au@Ag NDCA chip combined with a 96-well plate could realize high-throughput SERS analyses of 96 samples with average analysis time less than 10 min. The substrate was applied for quantitative analyses of two food projects. One was 6-benzylaminopurine auxin residue in sprout samples with detection limit of 38.8 μg/L, recoveries of 93.3-105.4% and RSDs of 1.5-6.5%, and the other was an edible spice of 4-amino-5,6-dimethylthieno (2,3-d) pyrimidin-2(1H)-one hydrochloride additive in beverage samples with detection limit of 18.0 μg/L, recoveries of 96.2-106.6% and RSDs of 3.5-7.9%. All the SERS results were well confirmed by conventional high-performance liquid chromatographic methods with relative errors less than 9.7%. The robust Au@Ag NDCA chip exhibited good analytical performances possessed great potential for convenient and reliable analyses of food quality and safety.

Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) have opened a variety of exciting research fields. However, although a vast number of applications have been proposed since the two techniques were first reported, none has been applied to real practical use. This calls for an update in the recent fundamental and application studies of SERS and TERS. Thus, the goals and scope of this review are to report new directions and perspectives of SERS and TERS, mainly from the viewpoint of combining their mechanism and application studies. Regarding the recent progress in SERS and TERS, this review discusses four main topics: (1) nanometer to subnanometer plasmonic hotspots for SERS; (2) Ångström resolved TERS; (3) chemical mechanisms, i.e., charge-transfer mechanism of SERS and semiconductor-enhanced Raman scattering; and (4) the creation of a strong bridge between the mechanism studies and applications.

Two-dimensional MBenes with ordered metal vacancies for surface-enhanced Raman scattering

As an emerging class of two-dimensional (2D) materials, MBenes show enormous potential for optoelectronic applications. However, their use in molecular sensing as surface-enhanced Raman scattering (SERS)-active material is unknown. Herein, for the first time, we develop a brand-new high-performance MBene SERS platform. Ordered vacancy-triggered highly sensitive SERS platform with outstanding signal uniformity based on a 2D Mo_4/3B₂ MBene material was designed. The 2D Mo_4/3B₂ MBene presented superior SERS activity to most of the semiconductor SERS substrates, showing a remarkable Raman enhancement factor of 3.88 × 10⁶ and an ultralow detection limit of 1 × 10^-9 M. The underlying SERS mechanism is revealed from systematic experiments and density functional theory calculations that the ultrahigh SERS sensitivity of 2D Mo_4/3B₂ MBene is derived from the efficient photoinduced charge transfer process between MBene substrates and adsorbed molecules. The abundant electronic density of states near the Fermi level of 2D Mo_4/3B₂ MBene enables its Raman enhancement by a factor of 100 000 times higher than that of the bulk MoB. Consequently, the 2D Mo_4/3B₂ MBene could accurately detect various trace chemical analytes. Moreover, with ordered metal vacancies in the 2D Mo_4/3B₂ MBene, uniform charge transfer sites are formed, resulting in an outstanding signal uniformity with a relative standard deviation down to 6.0%. This work opens up a new horizon for the high-performance SERS platform based on MBene materials, which holds great promise in the field of chemical sensing.

High-specificity molecular sensing on an individual whispering-gallery-mode cavity: coupling-enhanced Raman scattering by photoinduced charge transfer and cavity effects

Optical whispering-gallery-mode (WGM) cavities have gained considerable interest because of their unique properties of enhanced light-matter interactions. Conventional WGM sensing is based on the mechanisms of mode shift, mode broadening, or mode splitting, which requires a small mode volume and an ultrahigh Q-factor. Besides, WGM sensing suffers from a lack of specificity in identifying substances, and additional chemical functionalization or incorporation of plasmonic materials is required for achieving good specificity. Herein, we propose a new sensing method based on an individual WGM cavity to achieve ultrasensitive and high-specificity molecular sensing, which combines the features of enhanced light-matter interactions on the WGM cavity and the "fingerprint spectrum" of surface-enhanced Raman scattering (SERS). This method identifies the substance by monitoring the Raman signal enhanced by the WGM cavity rather than monitoring the variation of the WGM itself. Therefore, ultrasensitive and high-specificity molecular sensing can be accomplished even on a low-Q cavity. The working principles of the proposed sensing method were also systematically investigated in terms of photoinduced charge transfer, Purcell effect, and optical resonance coupling. This work provides a new WGM sensing approach as well as a strategy for the design of a high-performance SERS substrate by creating an optical resonance mode.

Green Synthesis of Three-Dimensional Au Nanorods@TiO2 Nanocomposites as Self-Cleaning SERS Substrate for Sensitive, Recyclable, and In Situ Sensing Environmental Pollutants

In this work, a simple, low-cost, green, and mild method for the preparation of three-dimensional nanocomposite materials of gold nanorods (Au NRs)@TiO₂ is reported. The surface of Au NRs was coated with TiO₂ in situ reduction at room temperature without a complicated operation. The synthetic Au NRs@TiO₂ nanocomposites were used as surface-enhanced Raman spectroscopy (SERS) active substrates for the reusable and sensitive detection of environmental pollutants. The results showed that the pollutants on Au NRs@TiO₂ nanocomposites have higher SERS activity and reproducibility than those on the Au NR substrate without the presence of TiO₂. Moreover, the SERS substrate can be readily recycled by UV-assisted self-cleaning to remove residual analyte molecules. Malachite green (MG) and crystal violet (CV) were used as examples to demonstrate the feasibility of the proposed sensor for the sensitive detection of environmental pollutants. The results showed that the limit of detections (LODs) were 0.75 μg/L and 0.50 μg/L for MG and CV, respectively, with the recoveries ranging from 86.67% to 91.20% and 83.70% to 89.00%. Meanwhile, the SERS substrate can be easily regenerated by UV light irradiation. Our investigation revealed that within three cycles, the Au NRs@TiO₂ substrates still maintained the high SERS enhancement effect that they showed when first used for SERS detection. These results indicated that the method can be used to detect MG and CV in really complex samples. Due to the high sensitivity, reusability, and portability and the rapid detection property of the proposed sensor, it can have potential applications in the on-site detection of environmental pollutants in a complex sample matrix.

Nanomaterials meet surface-enhanced Raman scattering towards enhanced clinical diagnosis: a review

Surface-enhanced Raman scattering (SERS) is a very promising tool for the direct detection of biomarkers for the diagnosis of i.e., cancer and pathogens. Yet, current SERS strategies are hampered by non-specific interactions with co-existing substances in the biological matrices and the difficulties of obtaining molecular fingerprint information from the complex vibrational spectrum. Raman signal enhancement is necessary, along with convenient surface modification and machine-based learning to address the former issues. This review aims to describe recent advances and prospects in SERS-based approaches for cancer and pathogens diagnosis. First, direct SERS strategies for key biomarker sensing, including the use of substrates such as plasmonic, semiconductor structures, and 3D order nanostructures for signal enhancement will be discussed. Secondly, we will illustrate recent advances for indirect diagnosis using active nanomaterials, Raman reporters, and specific capture elements as SERS tags. Thirdly, critical challenges for translating the potential of the SERS sensing techniques into clinical applications via machine learning and portable instrumentation will be described. The unique nature and integrated sensing capabilities of SERS provide great promise for early cancer diagnosis or fast pathogens detection, reducing sanitary costs but most importantly allowing disease prevention and decreasing mortality rates.

Controlled fiber core mode and surface mode interaction for enhanced SERS performance

Three-dimensional surface-enhanced Raman scattering (SERS) platform based on microstructure fibers has many advantages for rapid liquid detection due to its microfluidic channels and light guidance. The fiber mode field distribution determines the light-analyte interaction strength but has rarely been studied in SERS applications. In this paper, we numerically and experimentally investigate the mode field distribution in suspended-core fibers decorated with gold nanoparticles. The interaction between the core mode and surface mode is controlled by changing the density of gold nanoparticles on the inner surface. The avoided crossing wavelength shifts linearly to red with the decrease of the nanoparticle spacing. With an optimized nanoparticle spacing of 20 nm, the avoided crossing occurs near the laser wavelength of 633 nm, which greatly increases the power ratio in the liquid channels and hence improves the SERS performance. The detection limit for crystal violet was 10^-9 M, and the enhancement factor was 10⁸. The avoided crossing mechanism can be applied to all fiber SERS probes for sensitivity improvement.

Reporter Molecules Embedded Au@Ag Core-Shell Nanospheres as SERS Nanotags for Cardiac Troponin I Detection

Rapid and accurate detection of acute myocardial infarction can improve patients' chances of survival. Cardiac troponin I (cTn I) is an important diagnostic biomarker for acute myocardial infarction. However, current immunoassays are insufficient to accurately measure cTn I, as they have limited detection sensitivity and are time-consuming. Surface-enhanced Raman scattering (SERS) is a brilliant fingerprints diagnostic technique characterised by ultrasensitivity, fast response, and qualitative and quantitative analysis capabilities. In this study, reporter molecules (4-Mercaptobenzoic acid, 4-MBA) embedded Au@Ag core-shell nanospheres as SERS nanotags were prepared for the detection of cTn I. As the Raman reporters were embedded between the core and the shell, they could be protected from the external environment and nanoparticle aggregation. Excellent SERS performances were obtained due to the enhanced local electromagnetic field in the gap of core and shell metals. In a standard phosphate buffered saline (PBS) environment, the limit of detection for cTn I was 0.0086 ng mL^-1 (8.6 ppt) with a good linear relationship. The excellent Raman detection performance was attributed to the localized surface plasmon resonance effect and strong electromagnetic field enhancement effect produced by the gap between the Au core and the Ag shell. The SERS nanotags we prepared were facile to synthesize, and the analysis procedure could be completed quickly (15 min), which made the detection of cTn I faster. Therefore, the proposed SERS nanotags have significant potential to be a faster and more accurate tool for acute myocardial infarction diagnostics.

Preparation and SERS performance of silver nanowires arrays on paper by automatic writing method

Silver nanowire ink was written on the surface of drawing paper by automatic writing method. Scanning electron microscopy was used to characterize the surface morphologies of the drawing paper before and after writing silver nanowires. The effects of fabrication parameters and measurement parameters on silver nanowires arrays were investigated. Crystal violet was selected as the probe molecule to study the SERS performance of silver nanowires arrays. The detection limit of crystal violet was as low as 10^-15 mol/L. The uniformity and repeatability of the arrays were also explored, and the relative standard deviation values were about 10%. Moreover, silver nanowires arrays were also relatively stable that SERS signals were still observed after ten weeks. Detection of the crystal violet residue was further achieved on the substrates by continuously pressing nine times. In addition, silver nanowires arrays were also applied to the quantitative analyses of 2, 2'-bipyridyl.

Label-Free Surface-Enhanced Raman Spectroscopic Analysis of Proteins: Advances and Applications

Surface-enhanced Raman spectroscopy (SERS) is powerful for structural characterization of biomolecules under physiological condition. Owing to its high sensitivity and selectivity, SERS is useful for probing intrinsic structural information of proteins and is attracting increasing attention in biophysics, bioanalytical chemistry, and biomedicine. This review starts with a brief introduction of SERS theories and SERS methodology of protein structural characterization. SERS-active materials, related synthetic approaches, and strategies for protein-material assemblies are outlined and discussed, followed by detailed discussion of SERS spectroscopy of proteins with and without cofactors. Recent applications and advances of protein SERS in biomarker detection, cell analysis, and pathogen discrimination are then highlighted, and the spectral reproducibility and limitations are critically discussed. The review ends with a conclusion and a discussion of current challenges and perspectives of promising directions.

Bismuth based novel substrate for surface enhanced Raman spectroscopy

Exploring the potential of non-noble metal substrates for Surface-enhanced Raman spectroscopy (SERS) has attracted considerable interest in recent years. In this work, we prepared nanoplate β-Bi₂O₃/Bi₂O₂CO₃ heterostructure via calcination of Bi₂O₂CO₃ precursor using a facile hydrothermal process and successfully demonstrated its use as a novel SERS substrate. The SERS sensitivity of substrate was performed by probing methyl orange (MO), rhodamine B (RhB), vitamin C (Vit. C), and melamine. The observed results show that the SERS signal is enhanced considerably by the adsorption of probe molecules on the surface of the Bismuth heterostructure SERS substrate.

Flexible Two-Dimensional Vanadium Carbide MXene-Based Membranes with Ultra-Rapid Molecular Enrichment for Surface-Enhanced Raman Scattering

Two-dimensional (2D) MXene materials have attracted broad interest in surface-enhanced Raman scattering (SERS) applications by virtue of their abundant surface terminations and excellent photoelectric properties. Herein, we propose to design highly sensitive MXene-based SERS membranes by integrating a 2D downsizing strategy with molecular enrichment approaches. Two types of 2D vanadium carbide (V₄C₃ and V₂C) MXenes are demonstrated for ultrasensitive SERS sensing, and corresponding SERS mechanisms including the effect of 2D vanadium carbide thickness on their electron density states and interfacial photoinduced charge transfer resonance were discussed. A 2D downsizing strategy authorizes nonplasmonic SERS detection with a sensitivity of 1 × 10^-7 M. Moreover, the performance can be further upgraded by vacuum-assisted filtration, which enables an ultrarapid molecular enrichment (within 2 min), ultrahigh molecular removal rate (over 95%), and improved sensitivity (5 × 10^-9 M). This work may shed light on the MXene-based materials as an innovative platform for nonplasmonic SERS detection.

A plasmonic AgNP decorated heterostructure substrate for synergetic surface-enhanced Raman scattering identification and quantification of pesticide residues in real samples

Rapid and on-site Raman spectroscopic identification and quantification of pesticide residues have been restricted to the low instrumental sensitivity of a portable Raman instrument, and no ideal platforms have been reported for analyzing pesticides on real sample surfaces. An efficient method to improve the detection sensitivity is to fabricate a highly sensitive surface-enhanced Raman scattering (SERS) substrate. Here, we present a MOF-derived ZnO@TiO₂ heterostructure combined with plasmonic AgNPs as a SERS sensor to achieve synergetic EM and CM enhancement, exhibiting high sensitivity, excellent signal reproducibility (RSD < 5.9%) and superior stability for analysis of model molecules. The SERS sensor achieved a low detection concentration of 10^-8 M for both CV and R6G molecular solutions on a portable Raman device. As a proof of concept, we modelled a pesticide residue on real samples of dendrobium leaves. Thiram, triazophos and fonofos solutions were selected as analytes for mimicking the function of on-site analysis. The SERS analytical platform showed not only high sensitivity for single- and multi-component identification, but also quantitative detection of pesticide residues on dendrobium leaves. These preliminary investigations indicate that this SERS analytical platform will allow the development and potential applications in rapid and on-site pesticide analysis.