Bright conjugated polymer nanoparticles containing a biodegradable shell produced at high yields and with tuneable optical properties by a scalable microfluidic device

Surfactant-Free Preparation of Conjugated Polymer Nanoparticles in Aqueous Dispersions Using Sulfate Functionalized Fluorene Monomers

Conjugated polymer nanoparticles (CPNs) can be synthesized by a Suzuki-Miyaura cross-coupling miniemulsion polymerization to give stable dispersions with a high concentration of uniform nanoparticles. However, large amounts of added surfactants are required to stabilize the miniemulsion and prevent the aggregation of the nanoparticles. Removal of the excess surfactant is challenging, and residual surfactant in thin films deposited from these dispersions can reduce the performance of optoelectronic devices. We report a novel approach to prepare stable dispersions with no added surfactant using a fluorene monomer, 2,7-dibromo-9,9-bis(undecanesulfate)-9H-fluorene, with alkyl side chains terminated by negatively charged sulfate groups. This functionality mimics the structure of one of the most commonly used surfactants, sodium dodecyl sulfate (SDS). This charged monomer effectively stabilizes the miniemulsion through electrostatic repulsion without the use of any additional surfactant in molar ratios ranging from 2.0 to 20.0 mol % of total monomer content for the preparation of poly(9,9-dioctylfluorene) (PFO) and poly(9,9-dioctylfluorene-alt-bithiophene) (PF8T2). Incorporation of 5.0 mol % of the amphiphilic monomer gave stable dispersions with a surface potential below -40 mV and, and polymers with molar mass (Mn) above 10 kg mol-1. This method should be generally applicable to the preparation of dispersions of polyfluorenes for application in organic electronic and optoelectronic devices without the requirement for time-consuming processes to remove residual surfactant.

Rational Design of NIR-II Emitting Conjugated Polymer Derived Nanoparticles for Image-Guided Cancer Interventions

Due to the reduced absorption, light scattering, and tissue autofluorescence in the NIR-II (1000-1700 nm) region, significant efforts are underway to explore diverse material platforms for in vivo fluorescence imaging, particularly for cancer diagnostics and image-guided interventions. Of the reported imaging agents, nanoparticles derived from conjugated polymers (CPNs) offer unique advantages to alternative materials including biocompatibility, remarkable absorption cross-sections, exceptional photostability, and tunable emission behavior independent of cell labeling functionalities. Herein, the current state of NIR-II emitting CPNs are summarized and structure-function-property relationships are highlighted that can be used to elevate the performance of next-generation CPNs. Methods for particle processing and incorporating cancer targeting modalities are discussed, as well as detailed characterization methods to improve interlaboratory comparisons of novel materials. Contemporary methods to specifically apply CPNs for cancer diagnostics and therapies are then highlighted. This review not only summarizes the current state of the field, but offers future directions and provides clarity to the advantages of CPNs over other classes of imaging agents.

Evaluation of the effect of co-transplantation of collagen-hydroxyapatite bio-scaffold containing nanolycopene and human endometrial mesenchymal stem cell derived exosomes to regenerate bone in rat critical size calvarial defect

This study aimed to evaluate the effect of nanoparticles based on the PLGA and biomolecule of lycopene (i.e. NLcp) and exosomes loaded on hydroxyapatite/collagen-based scaffolds (HA/Coll), on human endometrial MSCs (hEnMSCs) differentiation into osteoblast cells. To this end, after synthesizing NLcp and isolating hEnMSC-derived exosomes, and studying their characterizations, HA/Coll scaffold with/without NLcp and exosome was fabricated. In following, the rat skull-defect model was created on 54 male Sprague-Dawley rats (12 weeks old) which were classified into 6 groups [control group (4 healthy rats), negative control group: bone defect without grafting (10 rats), and experimental groups including bone defect grafted with HA/Coll scaffold (10 rats), HA/Coll/NLcp scaffold (10 rats), HA/Coll scaffold + exosome (10 rats), and HA/Coll-NLcp scaffold + exosome (10 rats)]. Finally, the grafted membrane along with its surrounding tissues was removed at 90 days after surgery, to assess the amount of defect repair by Hematoxylin and eosin staining. Moreover, immunohistochemical and X-ray Micro-Computed Tomography (Micro-CT) analyses were performed to assess osteocalcin and mean bone volume fraction (BVF). Based on the results, although, the existence of the exosome in the scaffold network can significantly increase mean BVF compared to HA/Coll scaffold and HA/Coll-NLcp scaffold (2.25-fold and 1.5-fold, respectively). However, the combination of NLcp and exosome indicated more effect on mean BVF; so that the HA/Coll-NLcp scaffold + exosome led to a 15.95 % increase in mean BVF than the HA/Coll scaffold + exosome. Hence, synthesized NLcp in this study can act as a suitable bioactive to stimulate the osteogenic, promotion of cell proliferation and its differentiation when used in the polymer scaffold structure or loaded into polymeric carriers containing the exosome.

The Role of Stabilizing Copolymer in Determining the Physicochemical Properties of Conjugated Polymer Nanoparticles and Their Nanomedical Applications

Conjugated polymer nanoparticles (CPNs) are a promising class of nanomaterials for biomedical applications, such as bioimaging, gene and drug delivery/release, photodynamic therapy (PDT), photothermal therapy (PTT), and environmental sensing. Over the past decade, many reports have been published detailing their synthesis and their various potential applications, including some very comprehensive reviews of these topics. In contrast, there is a distinct lack of overview of the role the stabilizing copolymer shells have on the properties of CPNs. This review attempts to correct this oversight by scrutinizing reports detailing the synthesis and application of CPNs stabilized with some commonly-used copolymers, namely F127 (Pluronic poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) diacrylate), PSMA (poly(styrene-co-maleic anhydride)), PLGA (poly(D, L-lactide-co-glycolide)) and PEG (polyethylene glycol) derivatives. The analysis of the reported physicochemical properties and biological applications of these CPNs provides insights into the advantages of each group of copolymers for specific applications and offers a set of guidance criteria for the selection of an appropriate copolymer when designing CPNs-based probes. Finally, the challenges and outlooks in the field are highlighted.

Microfluidic Nanoparticles for Drug Delivery

Nanoparticles (NPs) have attracted tremendous interest in drug delivery in the past decades. Microfluidics offers a promising strategy for making NPs for drug delivery due to its capability in precisely controlling NP properties. The recent success of mRNA vaccines using microfluidics represents a big milestone for microfluidic NPs for pharmaceutical applications, and its rapid scaling up demonstrates the feasibility of using microfluidics for industrial-scale manufacturing. This article provides a critical review of recent progress in microfluidic NPs for drug delivery. First, the synthesis of organic NPs using microfluidics focusing on typical microfluidic methods and their applications in making popular and clinically relevant NPs, such as liposomes, lipid NPs, and polymer NPs, as well as their synthesis mechanisms are summarized. Then, the microfluidic synthesis of several representative inorganic NPs (e.g., silica, metal, metal oxide, and quantum dots), and hybrid NPs is discussed. Lastly, the applications of microfluidic NPs for various drug delivery applications are presented.

Photosensitized and Photothermal Stimulation of Cellular Membranes by Organic Thin Films and Nanoparticles

Conjugated polymers are increasingly exploited for biomedical applications. In this work, we explored the optical characteristics of conjugated polymers of variable chemical structures at multiple levels relevant to biological interfacing, from fluorescence yield to their influence on cellular membrane potential. We systematically compared the performance of conjugated polymer as cast thin films and as nanoparticles stabilized with amphiphilic polyethylene glycol-poly lactic acid-co-glycolic acid (PEG-PLGA). We assessed in both the dark and under illumination the stability of key optoelectronic properties in various environments, including air and biologically relevant physiological saline solutions. We found that photoreduction of oxygen correlates with nanoparticle and film degradation in physiologically relevant media. Using patch-clamp recordings in cell lines and primary neurons, we identified two broad classes of membrane potential response, which correspond to photosensitizer- and photothermal-mediated effects. Last, we introduced a metric named OED₅₀ (optical energy for 50% depolarization), which conveys the phototoxic potency of a given agent and thereby its operational photo-safety profile.

On-chip transporting arresting and characterizing individual nano-objects in biological ionic liquids

Understanding and controlling the individual behavior of nanoscopic matter in liquids, the environment in which many such entities are functioning, is both inherently challenging and important to many natural and man-made applications. Here, we transport individual nano-objects, from an assembly in a biological ionic solution, through a nanochannel network and confine them in electrokinetic nanovalves, created by the collaborative effect of an applied ac electric field and a rationally engineered nanotopography, locally amplifying this field. The motion of so-confined fluorescent nano-objects is tracked, and its kinetics provides important information, enabling the determination of their particle diffusion coefficient, hydrodynamic radius, and electrical conductivity, which are elucidated for artificial polystyrene nanospheres and subsequently for sub-100-nm conjugated polymer nanoparticles and adenoviruses. The on-chip, individual nano-object resolution method presented here is a powerful approach to aid research and development in broad application areas such as medicine, chemistry, and biology.

Different PEG-PLGA Matrices Influence In Vivo Optical/Photoacoustic Imaging Performance and Biodistribution of NIR-Emitting π-Conjugated Polymer Contrast Agents

The π-conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b0]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) with deep-red/near-infrared (NIR) absorption and emission has been investigated as a contrast agent for in vivo optical and photoacoustic imaging. PCPDTBT is encapsulated within poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG2kDa -PLGA4kDa or PEG5kDa -PLGA55kDa ) micelles or enveloped by the phospholipid, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (PEG2kDa -DPPE), to investigate the formulation effect on imaging performance, biodistribution, and biocompatibility. Nanoparticles that meet the quality requirements for parenteral administration are generated with similar physicochemical properties. Optical phantom imaging reveals that both PEG-PLGA systems exhibit a 30% higher signal-to-background ratio (SBR) than PEG2kDa -DPPE. This trend cannot be observed in a murine HeLa xenograft model following intravenous administration since dramatic differences in biodistribution are observed. PEG2kDa -PLGA4kDa systems accumulate more rapidly in the liver compared to other formulations and PEG2kDa -DPPE demonstrates a higher tumor localization. Protein content in the "hard" corona differs between formulations (PEG2kDa -DPPE < PEG2kDa -PLGA4kDa < PEG5kDa -PLGA55kDa ), although this observation alone does not explain biodistribution patterns. PEG2kDa -PLGA4kDa systems show the highest photoacoustic amplitude in a phantom, but also a lower signal in the tumor due to differences in biodistribution. This study demonstrates that formulations for conjugated polymer contrast agents can have significant impact on both imaging performance and biodistribution.

Biodegradable Materials and Green Processing for Green Electronics

There is little question that the "electronic revolution" of the 20th century has impacted almost every aspect of human life. However, the emergence of solid-state electronics as a ubiquitous feature of an advanced modern society is posing new challenges such as the management of electronic waste (e-waste) that will remain through the 21st century. In addition to developing strategies to manage such e-waste, further challenges can be identified concerning the conservation and recycling of scarce elements, reducing the use of toxic materials and solvents in electronics processing, and lowering energy usage during fabrication methods. In response to these issues, the construction of electronic devices from renewable or biodegradable materials that decompose to harmless by-products is becoming a topic of great interest. Such "green" electronic devices need to be fabricated on industrial scale through low-energy and low-cost methods that involve low/non-toxic functional materials or solvents. This review highlights recent advances in the development of biodegradable materials and processing strategies for electronics with an emphasis on areas where green electronic devices show the greatest promise, including solar cells, organic field-effect transistors, light-emitting diodes, and other electronic devices.

Enhanced optical imaging properties of lipid nanocapsules as vehicles for fluorescent conjugated polymers

Conjugated polymer nanoparticles (CPNs) have emerged as highly photostable probes for optical and photoacoustic imaging. However, the aggregation of conjugated polymer (CP) molecules upon nanoparticle formation is associated with fluorescence quenching, poor yields and mutable particle sizes. This study investigated whether the CP encapsulation within the liquid midchain triglyceride (MCT) core of lipid nanocapsules (LNCs) may achieve reduced packing of CP chains leading to a stable system with enhanced optical features. The red- and near infrared-emitting CPs, CN-PPV and PCPDTBT, showed precipitation and aggregation-induced quenching with concentrations >~25 µg/mL in MCT alone. Despite this, CP encapsulation within LNCs abolished quenching at concentrations up to 1500 µg/mL. PCPDTBT-LNCs exhibited a quantum yield of 2.8% and a higher signal:background ratio in an optical imaging phantom compared to literature reports of PCPDTBT encapsulated in PEG-PLGA nanoparticles. In contrast, PCPDTBT-LNCs had slightly lower photoacoustic amplitudes than reported PEG-PLGA systems. CP-LNCs were also stable in size (32 ± 0.7 nm) and photoluminescence over 21 days at 4 °C, 25 °C and 37 °C. In summary, encapsulation of CP within the liquid core of lipid nanocapsules enhances the optical properties of fluorescent CP.

Flash nanoprecipitation of ultra-small semiconducting polymer dots with size tunability

Small-sized semiconducting polymer dots (Pdots) provide better tissue and subcellular penetration while minimizing unspecific interactions, and make the fast clearance of Pdots from human bodies possible by urinary excretion. We employ a powerful and scalable technology, flash nanoprecipitation, to prepare Pdots with small sizes (hydrodynamic diameters ∼10 nm).

Conjugated polymers as nanoparticle probes for fluorescence and photoacoustic imaging

In this review, the role of conjugated polymer nanoparticles (CPNs) in emerging bioimaging techniques is described.

In Vivo Optical Performance of a New Class of Near-Infrared-Emitting Conjugated Polymers: Borylated PF8-BT

Borylated poly(fluorene-benzothiadiazoles) (PF8-BT) are π-conjugated polymers (CPs) with deep-red/near-infrared (NIR) absorption and emission profiles suitable for in vivo optical imaging. A fully borylated PF8-BT derivative (P4) was encapsulated in pegylated poly(lactic-co-glycolic acid) (PEG-PLGA) nanoparticles and compared with a reference NIR-emitting CP (PCPDTBT) or indocyanine green (ICG). All formulations satisfied quality requirements for parenterally administered diagnostics. P4 nanoparticles had higher quantum yield (2.3%) than PCPCDTBT (0.01%) or ICG nanoparticles (1.1%). The signal/background ratios (SBRs) of CP systems P4 and PCPDTBT in a phantom mouse (λ_em = 820 nm) increased linearly with fluorophore mass (12.5-100 μg/mL), while the SBRs of ICG decreased above 25 μg/mL. P4 nanoparticles experienced <10% photobleaching over 10 irradiations (PCPDTBT: ∼25% and ICG: >44%). In a mouse tumor xenograft model, P4 nanoparticles showed a 5-fold higher SBR than PCPDTBT particles with fluorophore accumulation in the liver > spleen > tumor. Blood chemistry and tissue histology showed no abnormalities compared to untreated animals after a single administration.

Low molecular weight PEG-PLGA polymers provide a superior matrix for conjugated polymer nanoparticles in terms of physicochemical properties, biocompatibility and optical/photoacoustic performance

The near-infrared absorbing conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) has been investigated as a contrast agent for optical and photoacoustic imaging. Lipophilic π-conjugated polymers can be efficiently encapsulated within self-assembling diblock copolymer poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG-PLGA) nanoparticles, although the effect of variations in PEG and PLGA chain lengths on nanoparticle properties, performance and biocompatibility have not yet been investigated. In this study, PEG-PLGA with different block lengths (PEG_2kDa-PLGA_4kDa, PEG_2kDa-PLGA_15kDa and PEG_5kDa-PLGA_55kDa) were used to encapsulate PCPDTBT. Nanoparticle sizes were smallest (<100 nm) when using PEG_2kDa-PLGA_4kDa, with <5% PCPDTBT content and a reduction in the total solids concentration of the organic phase. All PEG-PLGA nanoparticles were colloidally stable in water and serum-supplemented cell culture medium over 24 h at 37 °C, with slight evidence of protein surface adsorption. PEG_2kDa-PLGA_4kDa systems showed a threefold lower cytotoxicity (IC₅₀ value) than the other two systems. Haemolytic activity was <2.5% for all systems and no platelet aggregation or inhibition of ADP-induced platelet aggregation was observed. Encapsulation of PCPDTBT within a PEG-PLGA matrix shifted fluorescence emission towards red wavelengths (760 nm in THF vs. 840 nm in nanoparticles) and reduced the quantum yield by 30-70-fold compared to THF. Nonetheless, PCPDTBT:PEG_2kDa-PLGA_4kDa systems had a marginally higher quantum yield and signal-to-background ratio in a phantom mouse compared with PEG_2kDa-PLGA_15kDa and PEG_5kDa-PLGA_55kDa systems. As a photoacoustic imaging probe, PCPDTBT:PEG_2kDa-PLGA_4kDa systems also showed a higher photoacoustic amplitude compared to higher molecular weight PEG-PLGA systems. Overall, the low molecular weight PEG_2kDa-PLGA_4kDa nanoparticle systems conferred the benefits of smaller sizes, reduced cytotoxicity and enhanced imaging performance compared to higher molecular weight matrix polymers.

Precise Deciphering of Brain Vasculatures and Microscopic Tumors with Dual NIR-II Fluorescence and Photoacoustic Imaging

Diagnostics of cerebrovascular structures and microscopic tumors with intact blood-brain barrier (BBB) significantly contributes to timely treatment of patients bearing neurological diseases. Dual NIR-II fluorescence and photoacoustic imaging (PAI) is expected to offer powerful strength, including good spatiotemporal resolution, deep penetration, and large signal-to-background ratio (SBR) for precise brain diagnostics. Herein, biocompatible and photostable conjugated polymer nanoparticles (CP NPs) are reported for dual-modality brain imaging in the NIR-II window. Uniform CP NPs with a size of 50 nm are fabricated from microfluidics devices, which show an emission peak at 1156 nm with a large absorptivity of 35.2 L g^-1 cm^-1 at 1000 nm. The NIR-II fluorescence imaging resolves hemodynamics and cerebral vasculatures with a spatial resolution of 23 µm at a depth of 600 µm. The NIR-II PAI enables successful noninvasive mapping of deep microscopic brain tumors (<2 mm at a depth of 2.4 mm beneath dense skull and scalp) with an SBR of 7.2 after focused ultrasound-induced BBB opening. This study demonstrates that CP NPs are promising contrast agents for brain diagnostics.

High-Resolution 3D NIR-II Photoacoustic Imaging of Cerebral and Tumor Vasculatures Using Conjugated Polymer Nanoparticles as Contrast Agent

Exogenous contrast-agent-assisted NIR-II optical-resolution photoacoustic microscopy imaging (ORPAMI) holds promise to decipher wide-field 3D biological structures with deep penetration, large signal-to-background ratio (SBR), and high maximum imaging depth to depth resolution ratio. Herein, NIR-II conjugated polymer nanoparticle (CP NP) assisted ORPAMI is reported for pinpointing cerebral and tumor vasculatures. The CP NPs exhibit a large extinction coefficient of 48.1 L g^-1 at the absorption maximum of 1161 nm, with an ultrahigh PA sensitivity up to 2 µg mL^-1 . 3D ORPAMI of wide-field mice ear allows clear visualization of regular vasculatures with a resolution of 19.2 µm and an SBR of 29.3 dB at the maximal imaging depth of 539 µm. The margin of ear tumor composed of torsional dense vessels among surrounding normal regular vessels can be clearly delineated via 3D angiography. In addition, 3D whole-cortex cerebral vasculatures with large imaging area (48 mm² ), good resolution (25.4 µm), and high SBR (22.3 dB) at a depth up to 1001 µm are clearly resolved through the intact skull. These results are superior to the recently reported 3D NIR-II fluorescence confocal vascular imaging, which opens up new opportunities for NIR-II CP-NP-assisted ORPAMI in various biomedical applications.

Microfluidics-Prepared Uniform Conjugated Polymer Nanoparticles for Photo-Triggered Immune Microenvironment Modulation and Cancer Therapy

Photothermal therapy (PTT) has shown great promise to spatiotemporally ablate cancer cells, and further understanding of the immune system response to PTT treatment would contribute to improvement in therapeutic outcomes. Herein, we utilize microfluidic technology to prepare biocompatible conjugated polymer nanoparticles (CP NPs) as PTT agents and assess the immune response triggered by CP-based PTT treatment in vitro and in vivo. Through careful control of the antisolvent, CP NPs with a uniform diameter of 52 nm were obtained. The c-RGD-functionalized CP NPs exhibit high photothermal conversion efficiency, inducing effective cancer cell death under an 808 nm laser illumination. Using macrophage cells as the model, CP NPs demonstrate effective activation of proinflammatory immune response. Furthermore, in tumor-bearing mice model, a single round of CP NP-assisted PTT could efficiently induce antitumor immunity activation and ultimately inhibit tumor growth. The study provides detailed understanding of both microfluidic technology for CP NP fabrication and photothermal-triggered antitumor immune responses.

Influence of the Surfactant Structure on Photoluminescent π-Conjugated Polymer Nanoparticles: Interfacial Properties and Protein Binding

π-Conjugated polymer nanoparticles (CPNs) are under investigation as photoluminescent agents for diagnostics and bioimaging. To determine whether the choice of surfactant can improve CPN properties and prevent protein adsorption, five nonionic polyethylene glycol alkyl ether surfactants were used to produce CPNs from three representative π-conjugated polymers. The surfactant structure did not influence size or yield, which was dependent on the nature of the conjugated polymer. Hydrophobic interaction chromatography, contact angle, quartz crystal microbalance, and neutron reflectivity studies were used to assess the affinity of the surfactant to the conjugated polymer surface and indicated that all surfactants were displaced by the addition of a model serum protein. In summary, CPN preparation methods which rely on surface coating of a conjugated polymer core with amphiphilic surfactants may produce systems with good yields and colloidal stability in vitro, but may be susceptible to significant surface alterations in physiological fluids.

Magnetic conjugated polymer nanoparticles doped with a europium complex for biomedical imaging

Self-assembling conjugated polymer nanoparticles containing PVK and PLGA-PEG as a matrix polymer were doped with both a luminescent rare-earth complex and magnetic nanoparticles (SPIONs), giving rise to materials that are both luminescent and magnetic.

Post-polymerization C-H Borylation of Donor-Acceptor Materials Gives Highly Efficient Solid State Near-Infrared Emitters for Near-IR-OLEDs and Effective Biological Imaging

Post-polymerization modification of the donor-acceptor polymer, poly(9,9-dioctylfluorene-alt-benzothiadiazole), PF8-BT, by electrophilic C-H borylation is a simple method to introduce controllable quantities of near-infrared (near-IR) emitting chromophore units into the backbone of a conjugated polymer. The highly stable borylated unit possesses a significantly lower LUMO energy than the pristine polymer resulting in a reduction in the band gap of the polymer by up to 0.63 eV and a red shift in emission of more than 150 nm. Extensively borylated polymers absorb strongly in the deep red/near-IR and are highly emissive in the near-IR region of the spectrum in solution and solid state. Photoluminescence quantum yield (PLQY) values are extremely high in the solid state for materials with emission maxima ≥ 700 nm with PLQY values of 44% at 700 nm and 11% at 757 nm for PF8-BT with different borylation levels. This high brightness enables efficient solution processed near-IR emitting OLEDs to be fabricated and highly emissive borylated polymer loaded conjugated polymer nanoparticles (CPNPs) to be prepared. The latter are bright, photostable, low toxicity bioimaging agents that in phantom mouse studies show higher signal to background ratios for emission at 820 nm than the ubiquitous near-IR emissive bioimaging agent indocyanine green. This methodology represents a general approach for the post-polymerization functionalization of donor-acceptor polymers to reduce the band gap as confirmed by the C-H borylation of poly((9,9-dioctylfluorene)-2,7-diyl-alt-[4,7-bis(3-hexylthien-5-yl)-2,1,3-benzothiadiazole]-2c,2cc-diyl) (PF8TBT) resulting in a red shift in emission of >150 nm, thereby shifting the emission maximum to 810 nm.