Ultrasensitive SERS performance in 3D "sunflower-like" nanoarrays decorated with Ag nanoparticles

Casting liquid PDMS on self-assembled bilayer polystyrene nanospheres to prepare a SERS substrate with two layers of nanopits for detection of p-nitrophenol

p-Nitrophenol (PNP) is widely used in pesticides, pharmaceuticals, and dyestuffs. It is vital to detect trace PNP in the environment, because it poses significant environmental hazards due to its high toxicity. In this paper, a new method was reported for preparing a SERS substrate with excellent SERS activity by combining self-assembly techniques and flexible materials. First, the three-dimensional (3D) polystyrene (PS) photonic crystal (PC) structural master was fabricated by stacking two layers of self-assembled PS nanospheres with different diameters. Polydimethylsiloxane (PDMS) with a complementary structure to the master was obtained by casting, curing and peeling off. Finally, the PDMS-Ag substrate was fabricated by sputtering a thin Ag layer on the PDMS structure. The enhancement factor (EF) of the PDMS-Ag substrate was calculated to be 2.90 × 109 by using 4-amino thiophenol (ATP) as the probe molecule, and the limit of detection (LOD) for ATP can reach 10-11 M. And the RSD of the SERS intensity for the peak at 1078 cm-1 on the PDMS-Ag substrates from batch to batch was within 2%, indicating the high reproducibility of the as-prepared substrate. The quantitative analysis of PNP was achieved with a LOD of 10-8 M. Therefore, the PDMS-Ag substrate exhibits high sensitivity and reproducibility, and it can detect PNP in trace amounts, with great potential for detecting other contaminants.

Nanostructured biosensing platforms for the detection of food- and water-borne pathogenic Escherichia coli

Pathogenic bacterial infection is one of the principal causes affecting human health and ecosystems. The accurate identification of bacteria in food and water samples is of significant interests to maintain safety and health for humans. Culture-based tests are practically tedious and may produce false-positive results, while viable but non-culturable microorganisms (NCMs) cannot be retrieved. Thus, it requires fast, reliable, and low-cost detection strategies for on-field analysis and point-of-care (POC) monitoring. The standard detection methods such as nucleic acid analysis (RT-PCR) and enzyme-linked immunosorbent assays (ELISA) are still challenging in POC practice due to their time-consuming (several hours to days) and expensive laboratory operations. The optical (surface plasmon resonance (SPR), fluorescence, and surface-enhanced Raman scattering (SERS)) and electrochemical-based detection of microbes (early stage of infective diseases) have been considered as alternative routes in the emerging world of nanostructured biosensing since they can attain a faster and concurrent screening of several pathogens in real samples. Moreover, optical and electrochemical detection strategies are opening a new route for the ability of detecting pathogens through the integration of cellphones, which is well fitted for POC analysis. This review article covers the current state of sensitive mechanistic approaches for the screening and detection of Escherichia coli O157:H7 (E. coli) pathogens in food and water samples, which can be potentially applied in clinical and environmental monitoring.

LSP-SPP Coupling Structure Based on Three-Dimensional Patterned Sapphire Substrate for Surface Enhanced Raman Scattering Sensing

Although the fabrication of controllable three-dimensional (3D) microstructures on substrates has been proposed as an effective solution for SERS, there remains a gap in the detection and manufacturability of 3D substrates with high performance. In this study, photolithography is adopted to obtain a pyramid-like array on a patterned sapphire substrate (PSS), with Al₂O₃ as the dielectric layer. In addition, silver nanoparticles (AgNPs) are used to decorate Au films to obtain mass-producible 3D SRES substrates. In the case of low fluorescence, the substrate realizes the coupling of localized surface plasmon polaritons (LSPs) and surface plasmon polaritons (SPPs), which is consistent with the simulation results obtained using the finite element method. The performance of the SERS substrate is evaluated using rhodamine 6G (R6G) and toluidine blue (TB) as probe molecules with detection limits of 10^-11 M and 10^-9 M, respectively. The substrate exhibits high hydrophobicity and excellent light-capturing capability. Moreover, it shows self-cleaning ability and long-term stability in practical applications. Allowing for the consistency of the composite substrate in the preparation process and the high reproducibility of the test results, it is considered to be promising for mass production.

Interface Design of 3D Flower-like Ag@ZnSe Composites: SERS and Photocatalytic Performance

In this work, we cosputtered Ag and ZnSe on a polystyrene template to form a three-dimensional (3D) Ag@ZnSe (x) structure. The 3D surface morphology and material composition that provided abundant "hot spots" were controlled by adjusting the sputtering power of the ZnSe, which was confirmed by finite-difference time-domain (FDTD) simulation. The introduction of ZnSe into the noble metal Ag also introduced a charge-transfer (CT) effect into the system, and the CT path was proven with the two-dimensional correlation spectroscopy (2D-COS)-surface-enhanced Raman scattering (SERS) technique. In addition, the substrate exhibited excellent catalytic activity due to the CT effect. The catalyzed degradation of malachite green (MG) was due to the CT effect in the system, and the catalytic process was successfully monitored by in situ SERS. Most importantly, the catalytic degradation by Ag@ZnSe (x) with different parameters was proportional to the degree of CT (ρ_CT). The SERS and catalytic mechanisms were analyzed in depth with the 2D-COS-SERS technique, which was also useful in verifying the CT process. The catalytic sites for MG were successfully monitored with the 2D-COS-SERS technique. This study provides a reference for studies of the synergistic effects of the electromagnetic mechanism and CT, as well as a new perspective on photocatalysis with dye molecules and monitoring of the catalytic processes.

Combining physical vapor deposition structuration with dealloying for the creation of a highly efficient SERS platform

Nanostructured noble metal thin films are highly studied for their interesting plasmonic properties. The latter can be effectively used for the detection of small and highly diluted molecules by the surface-enhanced Raman scattering (SERS) effect. Regardless of impressive detection limits achieved, synthesis complexity and the high cost of gold restrict its use in devices. Here, we report on a novel two-step approach that combines the deposition of a silver-aluminum thin film with dealloying to design and fabricate efficient SERS platforms. The magnetron sputtering technique was used for the deposition of the alloy thin film to be dealloyed. After dealloying, the resulting silver nanoporous structures revealed two degrees of porosity: macroporosity, associated to the initial alloy morphology, and nanoporosity, related to the dealloying step. The resulting nanoporous columnar structure was finely optimized by tuning deposition (i.e., the alloy chemical composition) and dealloying (i.e., dealloying media) parameters to reach the best SERS properties. These are reported for samples dealloyed in HCl and with 30 atom % of silver at the initial state with a detection limit down to 10^-10 mol·L^-1 for a solution of rhodamine B.

Flexible surface-enhanced Raman scatting substrates: recent advances in their principles, design strategies, diversified material selections and applications

Surface-enhanced Raman scattering (SERS) is widely used as a powerful analytical technology in cutting-edge areas such as food safety, biology, chemistry, and medical diagnosis, providing ultra-fast, ultra-sensitive, nondestructive characterization and achieving ultra-high detection sensitivity even down to the single-molecule level. Development of Raman spectroscopy is strongly dependent on high-performance SERS substrates, which have long evolved from the early days of rough metal electrodes to periodic nanopatterned arrays building on solid supporting substrates. For rigid SERS substrates, however, their applications are restricted by sophisticated pretreatments for detecting solid samples with non-planar surfaces. It is therefore essential to reassert the principles in constructing flexible SERS substrates. Herein, we comprehensively review the state-of-the-art in understanding, preparing and using flexible SERS. The basic mechanisms behind the flexible SERS are briefly outlined, typical design strategies are highlighted and diversified selection of materials in preparing flexible SERS substrates are reviewed. Then the recent achievements of various interdisciplinary applications based on flexible SERS substrates are summarized. Finally, the challenges and perspectives for future evolution of flexible SERS and their applications are demonstrated. We propose new research directions focused on stimulating the real potential of SERS as an advanced analytical technique for commercialization.

Nanocellulose as a promising substrate for advanced sensors and their applications

Nanocellulose has broad and promising applications owing to its low density, large specific surface area, high mechanical strength, modifiability, renewability. Recently, nanocellulose has been widely used to fabricate flexible, durable and environmental-friendly sensor substrates. In this contribution, the construction and characteristics of nanocellulose-based sensors are comprehensively reviewed. Various nanocellulose-based sensors are summarized and divided into colorimetric, fluorescent, electronic, electrochemical and SERS types according to the sensing mechanism. This review also introduces the applications of nanocellulose-based sensors in the fields of biomedicine, environmental monitoring, food safety, and wearable devices.

Three-Dimensional Dendritic Au-Ag Substrate for On-Site SERS Detection of Trace Molecules in Liquid Phase

The development of a facile surface-enhanced Raman scattering (SERS) sensor for the on-site detection of trace molecules in liquid phase is a compelling need. In this paper, a three-dimensional (3D) dendritic Au–Ag nanostructure was constructed by a two-step electro displacement reaction in a capillary tube for the on-site liquid phase detection of trace molecules. The multiplasmon resonance mechanism of the dendritic Au–Ag structure was simulated using the finite-difference time domain (FDTD) method. It was confirmed that the highly branched 3D structure promoted the formation of high-density “hot spots” and interacted with the gold nanoparticles at the dendrite tip, gap, and surface to maximize the spatial electric field, which allowed for high signal intensification to be observed. More importantly, the unique structure of the capillary made it possible to achieve the on-site detection of trace molecules in liquids. Using Rhodamine 6G (R6G) solution as a model molecule, the 3D dendritic Au–Ag substrate exhibited a high detection sensitivity (10⁻¹³ mol/L). Furthermore, the developed sensor was applied to the detection of antibacterial agents, ciprofloxacin (CIP), with clear Raman characteristic peaks observed even at concentrations as low as 10⁻⁹ mol/L. The results demonstrated that the 3D dendritic Au–Ag sensor could successfully realize the rapid on-site SERS detection of trace molecules in liquids, providing a promising platform for ultrasensitive and on-site liquid sample analysis.

Breaking Down SERS Detection Limit: Engineering of a Nanoporous Platform for High Sensing and Technology

In this study, nanoporous gold (NPG) was synthesized by free corrosion dealloying of an amorphous precursor, Au20Cu48Ag7Pd5Si20 (at. %), in a mixture of nitric and hydrofluoric acid, starting from amorphous melt-spun ribbons. NPG revealed a 3D nanoporous structure composed of pores and multigrain ligaments of an average size of 60 nm. NPG was further anodized in oxalic acid at 8 V vs. Ag/AgCl reference electrode to obtain a bimodal morphology composed of ligaments disrupted in finer features. Both NPG and anodized samples (A-NPG) were found to be mechanically stable to bending and active for surface-enhanced Raman scattering (SERS). SERS activity of samples was investigated using 4,4'-bipyridine as a probe molecule. A detection limit of 10-16 M was found for both samples, but in A-NPG, the signal was strongly enhanced. The extremely high enhancement obtained for A-NPG is attributed both to the small size of ligaments and crystals of which they are made, as well as to the nanometric features resulting from anodization treatment. Such a microstructure showed homogenous SERS response in terms of average enhancement all across the surface, as demonstrated by mapping measurements. Furthermore, NPG and A-NPG were tested as electrodes for electrocatalytic applications, showing good properties. The engineering steps from the amorphous precursor to A-NPG led us to obtain a high-sensing platform, with extremely low detection limit and intrinsic properties, that might significantly contribute to the cutting-edge technology of the future.

Dimensional Design for Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopy technique that enables specific identification of target analytes with sensitivity down to the single-molecule level by harnessing metal nanoparticles and nanostructures. Excitation of localized surface plasmon resonance of a nanostructured surface and the associated huge local electric field enhancement lie at the heart of SERS, and things will become better if strong chemical enhancement is also available simultaneously. Thus, the precise control of surface characteristics of enhancing substrates plays a key role in broadening the scope of SERS for scientific purposes and developing SERS into a routine analytical tool. In this review, the development of SERS substrates is outlined with some milestones in the nearly half-century history of SERS. In particular, these substrates are classified into zero-dimensional, one-dimensional, two-dimensional, and three-dimensional substrates according to their geometric dimension. We show that, in each category of SERS substrates, design upon the geometric and composite configuration can be made to achieve an optimized enhancement factor for the Raman signal. We also show that the temporal dimension can be incorporated into SERS by applying femtosecond pulse laser technology, so that the SERS technique can be used not only to identify the chemical structure of molecules but also to uncover the ultrafast dynamics of molecular structural changes. By adopting SERS substrates with the power of four-dimensional spatiotemporal control and design, the ultimate goal of probing the single-molecule chemical structural changes in the femtosecond time scale, watching the chemical reactions in four dimensions, and visualizing the elementary reaction steps in chemistry might be realized in the near future.

The antimicrobial effect of silver nanoparticles coated with silica against human pathogenic bacteria and fungi

The antibacterial property of silver (Ag) has been known since ancient time. It is reported in the literature that silver nanoparticles (AgNPs) exhibit improved antibacterial and antifungal properties in comparison to silver ions of equivalent metallic Ag concentration.A simple method has been used based on solenoid soles for the synthesis of nanoparticles of silver coated on silica. AgNPs were compared positively with silver nitrate solution and ampicillin standard antibiotics at a concentration of 50μg / mL (Table 1 and 2). AgNPs mentioned in the silica activity exhibited more than standard silver nitrate and antibiotics. AgNPs were fairly toxic to Salmonella sp., Neisseria sp., Klebsiella sp., and Pseudomonas sp. with an inhibition zone 21, 24, 16, 23 mm respectively. AgNPs exhibited strong antifungal activity against fungal strains (Candida sp., Aspergillus fumigatus and Aspergillus flavus) in different concentrations such as 30-50 and 60 μg/ml were examined for antifungal activity. AgNPs revealed the highest antifungal activity with the inhibition zone 26, 25 and 22 mm respectively. Results of the present study prevealed that AgNPs have a remarkable potential as antimicrobial agent in treating infectious diseases.

Applications of surface-enhanced Raman spectroscopy in environmental detection

As the human population grows, the anthropogenic impacts from various agricultural and industrial processes produce unwanted contaminants in the environment. The accurate, sensitive and rapid detection of such contaminants is vital for human health and safety. Surface-enhanced Raman spectroscopy (SERS) is a valuable analytical tool with wide applications in environmental contaminant monitoring. The aim of this review is to summarize recent advancements within SERS research as it applies to environmental detection, with a focus on research published or accessible from January 2021 through December 2021 including early-access publications. Our goal is to provide a wide breadth of information that can be used to provide background knowledge of the field, as well as inform and encourage further development of SERS techniques in protecting environmental quality and safety. Specifically, we highlight the characteristics of effective SERS nanosubstrates, and explore methods for the SERS detection of inorganic, organic, and biological contaminants including heavy metals, pharmaceuticals, plastic particles, synthetic dyes, pesticides, viruses, bacteria and mycotoxins. We also discuss the current limitations of SERS technologies in environmental detection and propose several avenues for future investigation. We encourage researchers to fill in the identified gaps so that SERS can be implemented in a real-world environment more effectively and efficiently, ultimately providing reliable and timely data to help and make science-based strategies and policies to protect environmental safety and public health.

Flexible 2D nanocellulose-based SERS substrate for pesticide residue detection

Nanocellulose holds considerable promise as an effective surface-enhanced Raman scattering (SERS) substrate for sensitive detection of trace targets. Flexible and high-sensitivity two-dimensional (2D) SERS substrates based on nanocrystalline cellulose (CNC) film were successfully developed via self assembly of two plasma nanoparticles: gold nanoflowers (AuNFs) and silver-coated gold nanocubes (Au@AgNCs). The loading process allows the precise control of nanoparticle distribution density and uniformity on CNC film, which are closely related to the plasma coupling effect between particles. The obtained CNC/Au@AgNC flexible two-dimensional substrate could sensitively detect pesticide residues on apple surface, and the detection limits (LOD) of dimethoate and acetamiprid were 4.1 and 10.7 μg/L, respectively. In addition, Raman signal intensity showed a good linear relationship with pesticide concentration in the range of 10-100 μg/L, which provided great potential for high sensitivity and field detection of dangerous targets.

Surface-enhanced Raman scattering (SERS) spectroscopy on localized silver nanoparticle-decorated porous silicon substrate

Surface-enhanced Raman scattering (SERS) spectroscopy is a rapid and non-destructive optical detection method that has been applied in various applications. Recently, three-dimensional (3D) substrate-based silicon nanostructures have been widely used as SERS substrates due to their high detection sensitivity, repeatability, and reusability. This paper uses a simple and low-cost electroless etching deposition process to generate silver nanoparticle-decorated porous silicon (Ag-PS) substrates. We propose a contact deposition process to generate localized Ag-PS (LocAg-PS) for SERS analysis. Due to the hydrophilic LocAg-PS pad on the hydrophobic PS background, the sample droplets self-aligned to the predefined LocAg-PS pads and condensed into a higher local concentration for high sensitivity SERS detection without extensive search for the hot spot. The effects of critical fabrication parameters and SERS analysis on the LocAg-PS surface were evaluated.

Metallic Plasmonic Array Structures: Principles, Fabrications, Properties, and Applications

The vast development of nanofabrication has spurred recent progress for the manipulation of light down to a region much smaller than the wavelength. Metallic plasmonic array structures are demonstrated to be the most powerful platform to realize controllable light-matter interactions and have found wide applications due to their rich and tunable optical performance through the morphology and parameter engineering. Here, various light-management mechanisms that may exist on metallic plasmonic array structures are described. Then, the typical techniques for fabrication of metallic plasmonic arrays are summarized. Next, some recent applications of plasmonic arrays are reviewed, including plasmonic sensing, surface-enhanced spectroscopies, plasmonic nanolasing, and perfect light absorption. Lastly, the existing challenges and perspectives for metallic plasmonic arrays are discussed. The aim is to provide guidance for future development of metallic plasmonic array structures.

Fabrication of a honeycomb-like bimetallic SERS substrate for the detection of triphenyltin chloride

Triphenyltin chloride (TPhT) is an organotin compound that causes intensive toxicological risk to the environment and humans. A detection method with high sensitivity and stability is therefore desired to better detect TPhT. In this study, a novel SERS substrate was prepared by sputtering an ultra-thin Au layer on a honeycomb-like silver nanoarray fabricated via the nanosphere lithography method. The ultra-thin Au layer was formed by sputtering the intermittent Au nanoparticles on the silver nanoarray, resulting in bimetallic coupling with dramatically increased hotspots and extremely high SERS enhancement with an analytical enhancement factor (AEF) of 6.08 × 10⁹ using Rhodamine 6G (R6G) as the probe molecule. Based on density functional theory (DFT) simulations, the Raman characteristic peaks of TPhT at 999 cm^-1 and 655 cm^-1 were selected for TPhT detection. The AEF of the SERS substrate HC5-AgAu was calculated to be 3.38 × 10⁶ with the detection concentration of TPhT down to 10^-10 M. The as-prepared honeycomb-like silver-gold bimetallic SERS substrate demonstrated great stability and sensitivity for TPhT detection, which might also be applied in monitoring many other environmental pollutants.

Enhanced broadband absorption with a twisted multilayer metal-dielectric stacking metamaterial

This study proposes and experimentally demonstrates enhanced broadband absorption with twisted multilayer metal-dielectric stacking. Compared with the traditional metal-dielectric pyramid, the resonance frequencies of the third-order magnetic resonances in the twisted quadrangular frustum redshifted obviously. Hence, the proposed structure enables an ultra-broadband absorption by combining the third-order magnetic resonances with the fundamental mode. The broadband absorption is insensitive to the incident wave polarization, whereas the twisted angle of the stacking plays an important role in deciding the absorption bandwidth. The sample was fabricated via the multi-material hybrid micro-droplet jetting modeling (MHMJM) technology to verify the enhanced absorbing performance. The measured results suggest that the proposed strategy provides a potential path to realize broadband electromagnetic wave absorption. Moreover, it is possible to extend the twisted metamaterial to the terahertz and infrared frequencies using the advanced nano fabrication techniques.

A new gold nanoflower sol SERS method for trace iodine ion based on catalytic amplification

As one of the essential trace elements in metabolism, iodine is crucial to maintain the normal physiological functions. Therefore, based on health and environmental protection, it is very important to realize sensitive detection of iodide ion. Herein, we developed a simple, rapid and sensitive method for the determination of iodide ion. Trypsin was used as an ideal template for the synthesis of gold nanoflower sol (AuNFs) with anisotropic surface structure and good stability. It exhibits highly active surface enhanced Raman scattering (SERS) effect and can be used as facile SERS sol substrate. The TMBox generated by the catalytic oxidation reaction of TMB-chloramine T-iodide ion is used as the SERS probe. The enhanced SERS signal intensity is linearly related to the iodide ion with high sensitivity. In addition, TMB has fluorescence effect, and the colored TMBox can produce RRS signal due to polymerization. Based on this, a quad-mode detection method of SERS, RRS, fluorescence and colorimetry for quantitative detection of trace iodide ions was established, and this method can be applied to the detection of iodide ions in natural water and drinking water.

Moiré superlattices and related moiré excitons in twisted van der Waals heterostructures

Recent advances in moiré superlattices and moiré excitons, such as quantum emission arrays, low-energy flat bands, and Mott insulators, have rapidly attracted attention in the fields of optoelectronics, materials, and energy research. The interlayer twist turns into a degree of freedom that alters the properties of the systems of materials, and the realization of moiré excitons also offers the feasibility of making artificial exciton crystals. Moreover, moiré excitons exhibit many exciting properties under the regulation of various external conditions, including spatial polarisation, alternating dipolar to alternating dipolar moments and gate-dependence to gate voltage dependence; all are pertinent to their applications in nano-photonics and quantum information. But the lag in theoretical development and the low-efficiency of processing technologies significantly limit the potential of moiré superlattice applications. In this review, we systematically summarise and discuss the recent progress in moiré superlattices and moiré excitons, and analyze the current challenges, and put forward relevant recommendations. There is no doubt that further research will lead to breakthroughs in their application and promote reforms and innovations in traditional solid-state physics and materials science.

Silver-nanoparticle-grafted silicon nanocones for reproducible Raman detection of trace contaminants in complex liquid environments

Super-hydrophobic delivery (SHD) is an efficient approach to enrich trace analytes into hot spot regions for ultrasensitive surface-enhanced Raman scattering (SERS) detection. In this article, we propose an efficient and simple method to prepare a highly-uniform SHD-SERS platform of high performance in trace detection, named as "silver-nanoparticle-grafted silicon nanocones" (termed AgNPs/SiNC) platform. It is fabricated via droplet-confined electroless deposition on the super-hydrophobic SiNC array. The AgNPs/SiNC platform allows trace analytes enriched into hot spots formed by AgNPs, leading to an excellent reproducibility and sensitivity. The relative standard deviation (RSD) for detecting R6G (10^-7 M) is down to 4.70% and the lowest detection concentration for R6G is 10^-14 M. Moreover, various contaminants in complex liquid environments, such as, crystal violet (10^-9 M) in lake water, melamine (10^-7 M) in liquid milk and methyl parathion (10^-7 M) in tap water, can be detected using the SERS platform. This result demonstrates the great potential of the AgNPs/SiNC platform in the fields of food safety and environmental monitoring.

Composite Structure Based on Gold-Nanoparticle Layer and HMM for Surface-Enhanced Raman Spectroscopy Analysis

Hyperbolic metamaterials (HMMs), supporting surface plasmon polaritons (SPPs), and highly confined bulk plasmon polaritons (BPPs) possess promising potential for application as surface-enhanced Raman scattering (SERS) substrates. In the present study, a composite SERS substrate based on a multilayer HMM and gold-nanoparticle (Au-NP) layer was fabricated. A strong electromagnetic field was generated at the nanogaps of the Au NPs under the coupling between localized surface plasmon resonance (LSPR) and a BPP. Additionally, a simulation of the composite structure was assessed using COMSOL; the results complied with those achieved through experiments: the SERS performance was enhanced, while the enhancing rate was downregulated, with the extension of the HMM periods. Furthermore, this structure exhibited high detection performance. During the experiments, rhodamine 6G (R6G) and malachite green (MG) acted as the probe molecules, and the limits of detection of the SERS substrate reached 10⁻¹⁰ and 10⁻⁸ M for R6G and MG, respectively. Moreover, the composite structure demonstrated prominent reproducibility and stability. The mentioned promising results reveal that the composite structure could have extensive applications, such as in biosensors and food safety inspection.

Elevating the density and intensity of hot spots by repeated annealing for high-efficiency SERS

The simultaneous output of highly sensitive and reproducible signals for surface-enhanced Raman spectroscopy (SERS) technology remains difficult. Here, we propose a two-dimensional (2D) composite structure using the repeated annealing method with MoS₂ film as the molecular adsorbent. This method provides enlarged Au nanoparticle (NP) density with much smaller gap spacing, and thus dramatically increases the density and intensity of hot spots. The MoS₂ films distribute among the hot spots, which is beneficial for uniform molecular adsorption, and further increases the sensitivity of the SERS substrate. Three kinds of molecules were used to evaluate the SERS substrate. Ultra-sensitive, highly repetitive, and stable SERS signals were obtained, which would promote the application process of SERS technology in quantitative analysis and detection.

Facile construction of large-area periodic Ag-Au composite nanostructure and its reliable SERS performance

With the maturity of nano-manufacturing technology, nano-materials with excellent surface-enhanced Raman scattering (SERS) activities have evolved from homogeneous materials to composite ones, but the structural uniformity of composite materials has not been effectively improved. We successfully obtained a series of Ag-Au composite nanostructures with high SERS activity by using a two-step deposition and confined spheroidization process and one-step in-situ substitution method. Anodized alumina templates with uniform size distribution were employed as the initial confined template for spheroidizing Ag film into periodic Ag nanoparticles (Ag NPs). The composite nanostructure was simply obtained after a one-step in-situ galvanic reaction based on the Ag NPs arrays. The results showed that the prepared Ag-Au composite nanostructure could be used as reliable SERS substrates with low relative standard deviation value of ∼6.25% for crystal violet molecules. Compared with previous reports, this one-step route greatly simplifies the process of preparing periodic composite nanomaterials and provides a new idea for constructing multi-component metal nanostructures.

Fabrication and Applications of 3D Nanoarchitectures for Advanced Electrocatalysts and Sensors

For the last few decades, nanoscale materials and structures have been extensively studied and developed, making a huge impact on human sustainability. For example, the introduction of nanostructures has brought substantial development in electrocatalysts and optical sensing applications. However, there are still remaining challenges that need to be resolved to further improve their performance, reliability, and cost-effectiveness. Herein, long-range ordered 3D nanostructures and their design principles are introduced with an emphasis on electrocatalysts for energy conversion and plasmonic nanostructures for optical sensing. Among the various fabrication techniques, sequential solvent-injection-assisted nanotransfer printing is suggested as a practical fabrication platform for tunable long-range ordered 3D nanostructures composed of ultrahigh-resolution building blocks. Furthermore, the importance of understanding and controlling the 3D design parameters is discussed to realize more efficient energy conversion as well as effective surface-enhanced Raman spectroscopy analyses, suggesting new solutions for clean energy and healthcare issues.

Hotspots on the Move: Active Molecular Enrichment by Hierarchically Structured Micromotors for Ultrasensitive SERS Sensing

Surface-enhanced Raman scattering (SERS) is recognized as one of the most sensitive spectroscopic tools for chemical and biological detections. Hotspots engineering has expedited promotion of SERS performance over the past few decades. Recently, molecular enrichment has proven to be another effective approach to improve the SERS performance. In this work, we propose a concept of "motile hotspots" to realize ultrasensitive SERS sensing by combining hotspots engineering and active molecular enrichment. High-density plasmonic nanostructure-supporting hotspots are assembled on the tubular outer wall of micromotors via nanoimprint and rolling origami techniques. The dense hotspots carried on these hierarchically structured micromotors (HSMs) can be magnet-powered to actively enrich molecules in fluid. The active enrichment manner of HSMs is revealed to be effective in accelerating the process of molecular adsorption. Consequently, SERS intensity increases significantly because of more molecules being adjacent to the hotspots after active molecular enrichment. This "motile hotspots" concept provides a synergistical approach in constructing a SERS platform with high performance. Moreover, the newly developed construction method of HSMs manifests the possibility of tailoring tubular length and diameter as well as surface patterns on the outer wall of HSMs, demonstrating good flexibility in constructing customized micromotors for various applications.

Lamellar nanoporous gold thin films with tunable porosity for ultrasensitive SERS detection in liquid and gas phase

Lamellar nanoporous gold thin films, constituted of a stack of very thin layers of porous gold, are synthesized by chemical etching from a stack of successively deposited nanolayers of copper and gold. The gold ligament size, the pore size and the distance between lamellas are tunable in the few tens nanometer range by controlling the initial thickness of the layers and the etching time. The SERS activity of these lamellar porous gold films is characterized by their SERS responses after adsorption of probe bipyridine and naphtalenethiol molecules. The SERS signal is investigated as a function of the bipyridine concentration from 10^-14 mol L^-1 to 10^-3 mol L^-1. The higher SERS response corresponds to an experimental detection limit down to 10^-12 mol L^-1. These performance is mainly attributed to the specific nanoporous gold architecture and the larger accessible surface to volume ratio. The lamellar nanoporous gold substrate is explored for sensitive SERS detection of dimethyl methylphosphonate (DMMP), a surrogate molecule of the highly toxic G-series nerve agents. The resultant nanostructure facilitates the diffusion of target molecules through the nanopores and their localization at the enhancing metallic surface leading to the unequivocal Raman signature of DMMP at a concentration of 5 parts per million.

A dual-functional PDMS-assisted paper-based SERS platform for the reliable detection of thiram residue both on fruit surfaces and in juice

In this work, a dual-functional SERS platform was developed via a paper-based SERS substrate with the aid of hydrophobic polydimethylsiloxane (PDMS) for effective and reliable measurements of thiram on fruit surfaces and in juice. Specifically, the paper-based SERS substrate was fabricated by coating with a core-shell Au@Ag nanorod monolayer, and the SERS performance was optimized compared with multilayer adsorption. Moreover, a versatile SERS platform was constructed by simply pasting the paper-based substrate in reverse onto PDMS using polymethyl methacrylate (PMMA) tape. On the one hand, this detection platform was able to realize sample enrichment due to the excellent hydrophobicity of PDMS, thereby increasing the sensitivity of measurements, and its function was successfully displayed through the identification of thiram in orange juice. On the other hand, PDMS could also play a supporting role and the paper-based substrate reversely stuck on PDMS was able to extract samples on the side without nanoparticles, which greatly avoids damage to nanoparticles on the substrate. Therefore, the accuracy of analysis was significantly improved and the inspection of thiram on the surface of an orange was demonstrated based on this function. As a result, this proposed SERS platform provides a new strategy for preparing multifunctional SERS sensors for the on-site monitoring of chemical contaminants in the food-safety field.

Lab-On-Capillary Platform for On-Site Quantitative SERS Analysis of Surface Contaminants Based on Au@4-MBA@Ag Core-Shell Nanorods

A portable and highly reproducible lab-on-capillary surface-enhanced Raman scattering (SERS) platform was developed using a specially designed homemade device for rapid on-site SERS measurement. In particular, this platform was composed of a capillary with a tiny orifice, which allows an effective and lossless sample extraction, resulting in high SERS performance. The capillary-based plasmonic substrate was prepared by compactly assembling Au@Ag core-shell nanorods (NRs) embedded with the 4-mercaptobenzoic acid (4-MBA) molecule as an internal standard onto the inner wall of a capillary tube. The fabrication process is facile and convenient with no requirement for complicated procedures. The exclusively prepared nanoparticles were able to significantly improve the signal consistency and overcome the limitations of reliable quantitative SERS analysis compared with conventional methods. Importantly, it was found that this capillary-based substrate with higher sensitivity was essentially attributed to more valid nanoparticles in the effective laser excitation region derived from the unique structure of the capillary. Furthermore, the applicability of the Au@4-MBA@Ag nanorod-decorated capillary for the quantitative identification of fungicides (malachite green and crystal violet) on the shell was demonstrated. As a result, this proposed lab-on-capillary sensor holds promising practical potential for rapid on-site analysis, especially for various contaminants on an uneven surface.

Magnetic assembled 3D SERS substrate for sensitive detection of pesticide residue in soil

Three-dimensional (3D) surface enhanced Raman scattering (SERS) substrates were produced by magnetic force assisting self-assembled nanoparticles in arrayed holes. Compared to '2D' plasmonic structures used in conventional SERS substrates, the 'hot spots' existed on whole depth of the 3D SERS substrates, which greatly enhanced the sensitivity. The prepared 3D SERS substrate was able to detect 4-aminothiophenol with a concentration down to 1 pM. Furthermore, the substrate was applied to detect hexachlorobenzene residue in soil, indicating its great potential for rapid and sensitive detection of extreme low concentrated molecules, especially pollutants residues in foods and environments.

Silver nanoparticle-assembled micro-bowl arrays for sensitive SERS detection of pesticide residue

It is of great significance to develop a simple and effective method for constructing large-scale high-quality surface-enhanced Raman scattering (SERS) substrate. Here, an Ag nanoparticle-assembled micro-bowl array was prepared by a close-packed polystyrene (PS) sphere monolayer templated electrodeposition approach. The fabricated Ag nanoparticle-assembled micro-bowl array shows high SERS sensitivity to rhodamine 6G (R6G) under an ultra-low concentration of 1 fM, and exhibits excellent SERS spectral uniformity with a small relative standard deviation (RSD) of 7.6% and good reproducibility (a RSD ∼8.2% for the average peak intensities from different batches of SERS substrates). The fabricated micro-bowl array SERS substrate was employed to detect pesticide residue (thiram and methyl parathion) on vegetables. The limit of detections (LODs) for the two pesticides are lower than the maximum residue limits (MRLs) set by the European Union respectively, showing promising application in rapid inspection of food safety.

Springtail-Inspired Superamphiphobic Ordered Nanohoodoo Arrays with Quasi-Doubly Reentrant Structures

The skin of springtails is well-known for being able to repel water and organic liquids using their hexagonally arranged protrusions with reentrant structures. Here, a method to prepare 100 nm-sized nanohoodoo arrays with quasi-doubly reentrant structures over square centimeters through combining the nanosphere lithography and the template-protected selective reactive ion etching technique is demonstrated. The top size of the nanohoodoos, the intra-nanohoodoo distance, and the height of the nanohoodoos can be readily controlled by the plasma-etching time of the polystyrene (PS) spheres, the size of the PS spheres used, and the reactive ion etching time of silicon. The strong structural control capability allows for the study of the relationship between the nanohoodoo structure and the wetting property. Superamphiphobic nanohoodoo arrays with outstanding water/organic liquid repellent properties are finally obtained. The superamphiphobic and liquid repellent properties endow the nanohoodoo arrays with remarkable self-cleaning performance even using hot water droplets, anti-fogging performance, and the surface-enhanced Raman scattering sensitivity improvement by enriching the analyte molecules on the nanohoodoo arrays. Overall, the simple and massive production of the superamphiphobic nanohoodoo structures will push their practical application processes in diverse fields where wettability and liquid repellency need to be carefully engineered.

Surface enhanced Raman scattering substrate for the detection of explosives: Construction strategy and dimensional effect

Surface-enhanced Raman spectroscopy (SERS) technology has been reported to be able to quickly and non-destructively identify target analytes. SERS substrate with high sensitivity and selectivity gave SERS technology a broad application prospect. This contribution aims to provide a detailed and systematic review of the current state of research on SERS-based explosive sensors, with particular attention to current research advances. This review mainly focuses on the strategies for improving SERS performance and the SERS substrates with different dimensions including zero-dimensional (0D) nanocolloids, one-dimensional (1D) nanowires and nanorods, two-dimensional (2D) arrays, and three-dimensional (3D) networks. The effects of elemental composition, the shape and size of metal nanoparticles, hot-spot structure and surface modification on the performance of explosive detection are also reviewed. In addition, the future development tendency and application of SERS-based explosive sensors are prospected.

A facile method in removal of PVP ligands from silver nanowires for high performance and reusable SERS substrate

Silver nanowires (i.e., AgNWs) can act as effective surface-enhanced Raman spectroscopy (i.e., SERS) substrates to detect small molecules. However, a lot of prepared AgNWs were often wrapped by polyvinylpyrrolidone (i.e., PVP) thin film to form an insulating layer to produce ill-defined AgNWs-PVP-AgNWs interface, limiting the plasmonic coupling among the stacked AgNWs. Herein, we reported a facile method in removal of PVP ligands from AgNWs for high performance and reusable SERS substrate. Sodium borohydride (NaBH₄) was used to completely remove the PVP ligands from the surface of AgNWs and produce a clean AgNWs-AgNWs interface that effectively enhances the localized surface plasmon resonance (i.e., LSPR) was produced, greatly improving the SERS activity of the AgNWs thin film. The SERS detection of rhodamine 6G (i.e., R6G) used with PVP AgNWs and without PVP AgNWs is 1.0 × 10^-9 and 1.0 × 10^-15 M, and the average enhancement factor (EF) is about 0.86 × 10⁴ and 9.35 × 10⁴, respectively. Moreover, the recyclable behavior of the AgNWs with several analyte molecules is much more interesting than that of the PVP@AgNWs. The SERS detection of AgNWs for R6G, the 3-mercaptopropionic acid (i.e., 3-MPA) and melamine with good recyclability in nanomolar and millimolar concentration can be easily detected.

Three-dimensional assembly of silver nanoparticles spatially confined by cellular structure of Spirulina, from nanospheres to nanosheets

Three-dimensional (3D) ordered construction of nanoparticles (NPs) has attracted much attention in wide applications, however, techniques with respect to cost effective nanofabrication of well defined functional architectures is still lacking. To address this specific issue, a bio-interface confinement approach is proposed that precisely replicates the complex cellular structural features of microbes and integrates silver NP (SNP) building blocks into their 3D framework in a precise, low cost and mass production way. Herein, the SNPs with nanospheres and nanosheets structure were synthesized by way of electroless deposition using Spirulina as template. Results showed that SNPs were orderly assembled along the cellular structure, and the spatially confinement of cellular texture induced the transformation of SNPs from sphere to flake morphology during their continuous growth. The silver assembly not only shows good antibacterial activity, but also exhibits excellent surface enhanced Raman scattering (SERS) performance with the enhancement factor as high as 5.95 × 10⁸ and good recuperability towards Rhodamine 6G. The fascinating SERS performance can be ascribed to the combined action of nanosheets morphology of SNPs, hierarchical nanostructure of the cellular structure, and the small interparticle spacing. This strategy provides an effective strategy for controllable and ordered 3D assembly of NPs by using the cellular texture.

Controllable MXene nano-sheet/Au nanostructure architectures for the ultra-sensitive molecule Raman detection

Surface-enhanced Raman scattering (SERS) spectroscopy aims to augment the relatively weak molecular vibrations based on electromagnetic enhancement (EE) and chemical enhancement (CE) mechanisms, and offers a potential way for material identification, even up to the single-molecule level, under atmospheric conditions. We have subtly combined the advantages of EE and CE, and propose new MXene (Ti3C2TX) nano-sheet/Au nanostructure architectures to break through the limitations of the Raman detection with long-time stability. The MXene nanosheets with excellent biocompatibility can effectively prevent structural distortion from the interaction with the Au NSs, and can also guarantee a high enhancement effect owing to the spatially extended electromagnetic field distribution and electron injection into the molecules. The self-assembled Au nanostructures are aggregated based on the Volmer-Weber growth model, and the electromagnetic field distribution radically evolves depending on the morphologies of the resultant Au nanostructures, leading to a drastic compensation for the limited EE of the MXene nano-sheets. Consequently, the intensified Raman vibrational signals of R6G molecules lead to a high enhancement factor of 2.9 × 107, even at an ultra-low concentration of 10-10 M. Similarly, the Raman signals of the methylene blue (MB) and crystal violet (CV) molecules can also be detected at low concentrations below 10-8 M, manifesting universal applications of the MXene/Au architectures for ultra-sensitive molecular detection under atmospheric conditions.

Si nano-cavity enabled surface-enhanced Raman scattering signal amplification

Surface-enhanced Raman scattering (SERS) detection technique has gained much attention as a powerful analytical tool in recent years. Nevertheless, the attention was mainly focused on the efficient scattering platform by structuring metals themselves, leading to more complex platforms and higher costs. Herein, a new and simple strategy to prepare large-area, low-cost, high-performance SERS substrate is introduced. Ultra-thin semiconductor silicon (Si) film is used as the functional layer for the metallic nano-particles based meta-surface. During the SERS sensing process, the emergence of a Si layer is observed to provide three key contributions: (1) to produce a maximal enhancement factor (EF) ∼470% compared to that of the bare meta-surface, (2) to keep a higher spectral stability for the Raman signal, and (3) to physically interdict the contact between the metal and the molecule. Moreover, the Si film's thickness is down to the scale of an electron's Bohr radius, indicating efficient electronic oscillations for the semiconductor material under electromagnetic excitation. The charge transfer behaviors between the molecules and the Si layer and metal nano-particles can also emerge. These findings could pave new insights on the surface-enhanced spectroscopy and lead to applications for the high-performance, large-area, low-cost SERS sensing process.

Controlling the Morphologies of Silver Aggregates by Laser-Induced Synthesis for Optimal SERS Detection

Controlling the synthesis of metallic nanostructures for high quality surface-enhanced Raman scattering (SERS) materials has long been a central task of nanoscience and nanotechnology. In this work, silver aggregates with different surface morphologies were controllably synthesized on a glass-solution interface via a facile laser-induced reduction method. By correlating the surface morphologies with their SERS abilities, optimal parameters (laser power and irradiation time) for SERS aggregates synthesis were obtained. Importantly, the characteristics for largest near-field enhancement were identified, which are closely packed nanorice and flake structures with abundant surface roughness. These can generate numerous hot spots with huge enhancement in nanogaps and rough surface. These results provide an understanding of the correlation between morphologies and SERS performance, and could be helpful for developing optimal and applicable SERS materials.

3D aluminum/silver hierarchical nanostructure with large areas of dense hot spots for surface-enhanced raman scattering

Plasmonic nanomaterials possessing large-volume, high-density hot spots with high field enhancement are highly desirable for ultrasensitive surface-enhanced Raman scattering (SERS) sensing. However, many as-prepared plasmonic nanomaterials are limited in available dense hot spots and in sample size, which greatly hinder their wide applications in SERS devices. Here, we develop a two-step physical deposition protocol and successfully fabricate 3D hierarchical nanostructures with highly dense hot spots across a large scale (6 × 6 cm² ). The nanopatterned aluminum film was first prepared by thermal evaporation process, which can provide 3D quasi-periodic cloud-like nanostructure arrays suitable for noble metal deposition; then a large number of silver nanoparticles with controllable shape and size were decorated onto the alumina layer surfaces by laser molecular beam epitaxy, which can realize large-area accessible dense hot spots. The optimized 3D-structured SERS substrate exhibits high-quality detection performance with excellent reproducibility (13.1 and 17.1%), whose LOD of rhodamine 6G molecules was 10^-9 M. Furthermore, the as-prepared 3D aluminum/silver SERS substrate was applied in detection of melamine with the concentration down to 10^-7 M and direct detection of melamine in infant formula solution with the concentration as low 10 mg/L. Such method to realize large-area hierarchical nanostructures can greatly simplify the fabrication procedure for 3D SERS platforms, and should be of technological significance in mass production of SERS-based sensors.

Highly sensitive detection of prostate cancer specific PCA3 mimic DNA using SERS-based competitive lateral flow assay

Accurate analysis of prostate cancer specific biomarkers plays an important role in the early diagnosis of prostate cancer. Traditional colorimetric lateral flow assay (LFA) has the limitations of low detection sensitivity and qualitative or semiquantitative detection. In this study, we developed a novel surface-enhanced Raman scattering (SERS)-based competitive LFA for the rapid and highly sensitive quantitative evaluation of prostate cancer antigen 3 (PCA3) mimic DNA. Herein, the competitive hybridization interaction with capture DNA between target PCA3 mimic DNA and reporter DNA-labeled SERS nanotags results in a change in the amount of SERS nanotags on the test line. The quantitative analysis of target PCA3 mimic DNA was realized by monitoring the Raman peak intensity of SERS nanotags on the test line. The limit of detection of PCA3 mimic DNA was estimated to be 3 fM, which is about three orders of magnitude more sensitive than that of a commercially available kit. By combining the outstanding characteristics of the well-established SERS-based competitive strategy and LFA platform, our design has strong potential for the early diagnosis of prostate cancer and other diseases.

Flexible and Superhydrophobic Silver Nanoparticles Decorated Aligned Silver Nanowires Films as Surface-Enhanced Raman Scattering Substrates

Flexible and superhydrophobic silver nanoparticles decorated aligned silver nanowires (AgNWs@AgNPs) films were employed as efficient surface-enhanced Raman scattering (SERS) substrates to investigate the SERS properties of the Rhodamine B (RB). Aligned silver nanowires were fabricated via interface self-assembly technique and incorporated into shape memory polyurethane (SMPU) by hot-press method, which not only endow the composites with ordered array characteristics but also flexibility due to the presence of polymer. After an electrochemical deposition combined with a galvanic reaction, AgNWs@AgNPs was obtained. At last, the substrate was functioned with perfluorodecanethiol (PFDT), and the target flexible and superhydrophobic silver nanoparticles decorated aligned silver nanowires substrate was obtained. The substrate confines water droplet in a small area, and the analytes were enriched owing to the concentrating effect. The SERS assay using the as-synthesized flexible and superhydrophobic silver films as substrates can detect Rhodamine B as low as10^-10 M. The mechanism is thought to relate to the formation of robust superhydrophobic film, which is based on micro- and nanoscaled hierarchical structure provided by the AgNWs@AgNPs layer, strong adhesion between the SMPU film and the AgNWs@AgNPs layer, and the low surface energy molecule adsorption on the silver surface. The combined superhydrophobic and flexible properties endow the SERS substrate with improved detection limit for practical SERS applications.

Surface-enhanced Raman scattering induced by the coupling of the guided mode with localized surface plasmon resonances

Surface-enhanced Raman spectroscopy (SERS) is considered to be a powerful analysis tool for the detection of molecules due to its ultra-high sensitivity and non-destructive nature. Here, we introduce a new type of hybrid SERS substrate, where gold nanorods are assembled on a structured support containing a top dielectric grating, dielectric spacer and gold mirror. Compared with the conventional metal nanoparticle assemblies on a flat support, our hybrid substrate shows an approximately 30-fold enhancement in the SERS signal. Numerical simulations show that such a substantial boost arises from the amplification of the absorption cross sections of the gold nanorods and the heating of the "hot spots" around the gold nanorods by the coupling between the guided mode in the structured support and the localized surface plasmon resonances. This mode coupling can be easily tuned by changing the thickness of the spacer. In addition, this substrate also presents uniform spot-to-spot and sample-to-sample SERS signals of the analyte molecules (relative standard deviations down to 7.4% and 6.1%, respectively). Moreover, the performance of this substrate has been demonstrated with the detection of melamine and cytosine, suggesting its great potential in food safety regulation and bioassays. This grating-mirror-enhanced strategy is available to any other SERS-active nanoparticles synthesized by chemical methods, which might offer new opportunities for improving the performance of the chemically prepared nanoparticles in realistic SERS-related applications.

Slanted Ag-Al alloy nanorods arrays for highly active and stable surface-enhanced Raman scattering substrates

Aluminum has been established as an earth-abundant and low-cost alternative to gold and silver for plasmonic applications. Particularly, aluminum largely tends to combines with oxygen compared with silver. Here, a simple glancing angle deposition technique is presented to prepare Ag-Al alloy nanorods (NRs) with a small amount of aluminum. The effect of aluminum is to combine oxygen or corroded substances under certain conditions, such as in the air and in etchants. Beside this, owing to the large diffusion coefficient of aluminum in a Si wafer, the aluminum diffuses easily into a Si wafer, so the bonding force between the Ag-Al alloy NRs and Si wafer can be improved accordingly. In this work, 3.5 at% Al alloy NRs are optimal to exhibit high surface-enhanced Raman scattering (SERS) sensitivity, long-time stability as well as strong bonding force with a Si wafer. Ag-Al alloy NRs make a metal-metal alloy a promising material platform to develop pretty sensitive as well as stable SERS substrates.