Fluorimetric Detection of Vapor Pollutants with Diketopyrrolopyrrole Polymer Microcavities

The increasing prevalence and detrimental effects of volatile organic compounds are driving the need for selective on-site sensors that do not require complex sampling or instrumentation. Broadband selective sensors exhibiting selectivity based on their distinct response mechanism is becoming of increasing technological relevance in both industrial and urban settings. In this context, we propose a label-free sensor based on a polymeric planar microcavity embedded with a fluorescent organic dye, designed to detect various pollutants in the vapor phase. The sensor consists of alternating layers of cellulose acetate and poly(N-vinylcarbazole) and contains a polystyrene defect layer doped with a quadrupolar diketopyrrolopyrrole. Both the structural properties of the polymer microcavity and the dye in the defect layer contribute to the sensor's response to analytes, creating a dual-probe system where a single photonic element translates chemical signals into optical signals, namely, transmission and fluorescence spectral variations. The discrimination capability of the photonic structure arises from the physicochemical interactions between the analytes and the polymer components. To validate our approach, we evaluate the sensor's response to four distinct volatile molecules and investigate the mechanisms influencing the optical response.

Tuning the photophysical and chiroptical properties of [4]helicene-diketopyrrolopyrroles

Synthesis and functionalization of diketopyrrolo[3,4-c]pyrrole (DPP) derivatives containing chiral groups able to induce a strong chiral perturbation of the DPP core are still a challenging task. We report in this work the straightforward preparation of four bis([4]helicene)-DPP and bis([4]thiahelicene)-DPP dyes upon the condensation of 2-CN-[4](thia)helicene precursors, followed by their N-alkylation by nucleophilic substitution (compounds 9-11) or by a Mitsunobu-type strategy (compound 12). Compound 12, which contains sec-phenylethyl groups attached to the nitrogen atoms, has been obtained as (R,R) and (S,S) enantiomers. The four DPP-helicenes are luminescent in solution, while the N-benzyl (10) and N-sec-phenethyl (12) are emissive in the solid state as well. The chiroptical properties of compound 12 in solution and in the solid state indicate a strong chiral perturbation provided by the α-stereogenic centres, in spite of the stereodynamic nature of the [4]helicene flanking units.

All-Polymer Microcavities for the Fluorescence Radiative Rate Modification of a Diketopyrrolopyrrole Derivative

Controlling the radiative rate of emitters with macromolecular photonic structures promises flexible devices with enhanced performances that are easy to scale up. For instance, radiative rate enhancement empowers low-threshold lasers, while rate suppression affects recombination in photovoltaic and photochemical processes. However, claims of the Purcell effect with polymer structures are controversial, as the low dielectric contrast typical of suitable polymers is commonly not enough to provide the necessary confinement. Here we show all-polymer planar microcavities with photonic band gaps tuned to the photoluminescence of a diketopyrrolopyrrole derivative, which allows a change in the fluorescence lifetime. Radiative and nonradiative rates were disentangled systematically by measuring the external quantum efficiencies and comparing the planar microcavities with a series of references designed to exclude any extrinsic effects. For the first time, this analysis shows unambiguously the dye radiative emission rate variations obtained with macromolecular dielectric mirrors. When different waveguides, chemical environments, and effective refractive index effects in the structure were accounted for, the change in the radiative lifetime was assigned to the Purcell effect. This was possible through the exploitation of photonic structures made of polyvinylcarbazole as a high-index material and the perfluorinated Aquivion as a low-index one, which produced the largest dielectric contrast ever obtained in planar polymer cavities. This characteristic induces the high confinement of the radiation electric field within the cavity layer, causing a record intensity enhancement and steering the radiative rate. Current limits and requirements to achieve the full control of radiative rates with polymer planar microcavities are also addressed.

Langmuir-Blodgett Films of Diketopyrrolopyrroles with Tunable Amphiphilicity

In this work, we present the formation of H- and J-aggregates of amphiphilic centrosymmetric diketopyrrolopyrroles containing aliphatic or aromatic amino groups. The inherent amphiphilicity of these dyes predestines their assembly at interfaces to form ordered supramolecular structures. In this work, we employed the Langmuir-Blodgett (LB) technique to generate, manipulate, and deposit such supramolecular structures. The aforementioned amines provide an additional means to control the formation of the supramolecular assemblies. In the resulting LB films, both H- and J-aggregates of the dyes can be realized, leading to very broad absorption spectra. In contrast to many reports on H- and J-aggregates, the interactions between the symmetric diketopyrrolopyrroles are controlled via interface assembly and π-stacking and not by dipolar interactions. We show that in the case of the aliphatic, but not for the aromatic amine functionalization, the usage of an acidic subphase enables the transition from H- to J-aggregate-dominated LB films via an increase in the surface pressure during deposition.

The Synthesis and Photophysical Properties of Weakly Coupled Diketopyrrolopyrroles

Three centrosymmetric diketopyrrolopyrroles possessing either two 2-(2′-methoxyphenyl)benzothiazole or two 2-(2′-methoxyphenyl)benzoxazolo-thiophene scaffolds were synthesized in a straightforward manner, and their photophysical properties were investigated. Their emission was significantly bathochromically shifted as compared with that of simple DPPs reaching 650 nm. Judging from theoretical calculations performed with time-dependent density functional theory, in all three cases the excited state was localized on the DPP core and there was no significant CT character. Consequently, emission was almost independent of solvents’ polarity. DPPs possessing 2,5-thiophene units vicinal to DPP core play a role in electronic transitions, resulting in bathochromically shifted absorption and emission. Interestingly, as judged from transient absorption dynamics, intersystem crossing was responsible for the deactivation of the excited states of DPPs possessing para linkers but not in the case of dye bearing meta linker.

Switch-On Diketopyrrolopyrrole-Based Chemosensors for Cations Possessing Lewis Acid Character

For the first time diketopyrrolopyrroles (DPPs) have been synthesized directly from nitriles possessing (aza)crown ethers leading to macrocycle-dye hybrids. Depending on the nature of the linkage between DPP and macrocyclic ring, various coordination effects are found. The strong interaction of the cations possessing Lewis acid character such as Li⁺ , Mg²⁺ and Zn²⁺ with 2-aminopyridin-4-yl-DPPs, leading to a bathochromic shift of both emission and absorption, as well as to strong enhancement of fluorescence was rationalized in terms of strong binding of these cations to the N=C-NR₂ functionality. The same effect has been observed for protonation. Depending on the size and the structure of the macrocyclic ring the complexation of cations by aza-crown ethers plays an important but secondary role. The interaction of Na⁺ and K⁺ with 2-aminopyridin-4-yl-DPPs leads to moderate enhancement of fluorescence due to the aza-crown ethers binding. The very weak fluorescence of DPP bearing 2-dialkylamino-pyridine-4-yl substituents is due to the closely lying T₂ state and the resulting intersystem crossing.

How To Make Nitroaromatic Compounds Glow: Next-Generation Large X-Shaped, Centrosymmetric Diketopyrrolopyrroles

Red‐emissive π‐expanded diketopyrrolopyrroles (DPPs) with fluorescence reaching λ=750 nm can be easily synthesized by a three‐step strategy involving the preparation of diketopyrrolopyrrole followed by N‐arylation and subsequent intramolecular palladium‐catalyzed direct arylation. Comprehensive spectroscopic assays combined with first‐principles calculations corroborated that both N‐arylated and fused DPPs reach a locally excited (S₁) state after excitation, followed by internal conversion to states with solvent and structural relaxation, before eventually undergoing intersystem crossing. Only the structurally relaxed state is fluorescent, with lifetimes in the range of several nanoseconds and tens of picoseconds in nonpolar and polar solvents, respectively. The lifetimes correlate with the fluorescence quantum yields, which range from 6 % to 88 % in nonpolar solvents and from 0.4 % and 3.2 % in polar solvents. A very inefficient (T₁) population is responsible for fluorescence quantum yields as high as 88 % for the fully fused DPP in polar solvents.

Visible light communication with efficient far-red/near-infrared polymer light-emitting diodes

Visible light communication (VLC) is a wireless technology that relies on optical intensity modulation and is potentially a game changer for internet-of-things (IoT) connectivity. However, VLC is hindered by the low penetration depth of visible light in non-transparent media. One solution is to extend operation into the "nearly (in)visible" near-infrared (NIR, 700-1000 nm) region, thus also enabling VLC in photonic bio-applications, considering the biological tissue NIR semitransparency, while conveniently retaining vestigial red emission to help check the link operativity by simple eye inspection. Here, we report new far-red/NIR organic light-emitting diodes (OLEDs) with a 650-800 nm emission range and external quantum efficiencies among the highest reported in this spectral range (>2.7%, with maximum radiance and luminance of 3.5 mW/cm2 and 260 cd/m2, respectively). With these OLEDs, we then demonstrate a "real-time" VLC setup achieving a data rate of 2.2 Mb/s, which satisfies the requirements for IoT and biosensing applications. These are the highest rates ever reported for an online unequalised VLC link based on solution-processed OLEDs.

N-Arylation of Diketopyrrolopyrroles with Aryl Triflates

A new methodology for the double N-arylation of diketopyrrolopyrroles with aryl triflates has been developed. It is now possible to prepare diketopyrrolopyrroles bearing N-substituents derived from naphthalene, anthracene and coumarin in two steps from commercially available phenols. This represents the first time arenes lacking strong electron-withdrawing groups were inserted onto lactamic nitrogen atoms via arylation. The ability to incorporate heretofore unprecedented substituents translates to increased modulation of the resulting photophysical properties such as switching-on/off solvatofluorochromism. TD-DFT calculations have been performed to explore the nature of the relevant excited states. This new synthetic method made it possible to elucidate the influence of such substituents on the absorption and emission properties of tetraaryl substituted diketopyrrolopyrroles.

Catalytic Effect of Photoluminescent Zinc Oxide Nanoparticles Formed in the Presence of Quaternary Ammonium Salts

The comparative effect of two quaternary ammonium salts from 1,2-bis(4-pyridyl)ethane (PyQAs), namely N,N′-diphenacyl-1,2-bis(4-pyridinium)ethane dibromide (PyQAs1) and N,N′-di(p-methoxyphenacyl)-1,2-bis(4-pyridinium)ethane dibromide (PyQAs2), upon the size and photoluminescence of zinc oxide nanoparticles (ZnO NPs) was investigated. The formation of ZnO NPs took place in the presence of variable amounts of the two PyQAs species (1, 2.5, and 5%), according to the chemical precipitation of zinc(II) acetate with potassium hydroxide in ethanol under reflux. The obtained ZnO NPs were structurally characterized by means of X-ray powder diffraction, infrared, and Raman spectroscopy. The fluorescence of all supernatant solutions, observed under ultraviolet light, determined us to make an investigation of the solutions by means of liquid chromatography coupled with electrospray ionization mass spectrometry (LC-MS-ESI) in order to elucidate the identity of the newly formed fluorescent species. Such an occurrence thus allowed the invocation of the catalytic effect of zinc(II) ions towards the organic transformation of both nonfluorescent PyQAs surfactants into new fluorescent organic species.

Electron-Rich Dipyrrolonaphthyridinediones: Synthesis and Optical Properties

This article describes the design rationale for highly electron-rich dipyrrolonaphthyridinedione (DPND) derivatives bearing substituted amino groups at the 3 and 9 positions, which exhibit absorption in the red and emission in the red/NIR region of the spectrum. These novel dyes are easily synthesized through a two-step protocol consisting of bromination of the DPND molecule followed by Buchwald-Hartwig amination. We demonstrated that the diamino-dipyrrolonaphthyridinediones have high ionization energies (∼4.7 eV) and that the spectroelectrochemical properties can be rationally tuned by altering the nature of the peripheral substituted amino groups. All amino-DPNDs exhibit solvatofluorochromism, which has not been previously reported for dyes possessing this core. Theoretical calculations reveal that in all cases, the strongest absorption is exhibited by the S1 states which clearly correlate with the HOMO-LUMO orbital transition. As all higher states have lower oscillator strengths, it is clear that fluorescence is completely dominated by the excitation/deexcitation sequence S0 → S1, S1 → S0 and that there are no contributions to the fluorescence from excitations to higher states.

Ruthenium-catalyzed tandem annulation/arylation for the synthesis of unsymmetrical bis(heteroaryl)methanes

A new Ru-catalyzed tandem furan annulation/arylation strategy has been developed to afford unsymmetrical bis(heteroaryl)methanes by a reaction between propargyl amines and indoles. A series of bis(heteroaryl)methanes containing furan and indole as well as indole and imidazopyridine moieties have been synthesized in high yields. The reaction possibly proceeds through furan annulation followed by nucleophilic addition of indole.

Pyrrolopyrrole aza boron dipyrromethene based two-photon fluorescent probes for subcellular imaging

A series of two-photon-absorbing pyrrolopyrrole aza boron dipyrromethenes have been prepared which can serve as fluorescent probes for subcellular imaging.

One-step rapid synthesis of π-conjugated large oligomers via C–H activation coupling

A series of DPP-based π-conjugated oligomers with linear, V-shaped, star-shaped, and twisted or 3D geometries and MWs of 1500–3300 has been facilely obtained in one step via Pd-catalyzed DA coupling.

Structure-property relationships and third-order nonlinearities in diketopyrrolopyrrole based D-π-A-π-D molecules

Nine new quadrupolar chromophores based on diketopyrrolopyrrole were designed and prepared by cross-coupling reactions. The property tuning has been achieved by structural variation of the peripheral substituents (donor) and enlargement of the π-system. Fundamental properties of target molecules were studied by differential scanning calorimetry, electrochemistry, and absorption and emission spectra. Nonlinear optical properties were studied by measuring the third harmonic generation. The experimental data were completed by quantum-chemical calculations and structure–property relationships were elucidated.

Addressing the autofluorescence issue in deep tissue imaging by two-photon microscopy: the significance of far-red emitting dyes

We have developed a new class of two-photon absorbing dyes that are far-red emitting, water-soluble, and very bright inside cells as well as in tissue. The significant autofluorescence from yellow wavelength region in tissue imaging can be addressed by deep-red emitting dyes.

The fluorescence imaging of tissue is essential for studying biological events beyond the cellular level. Two-photon microscopy based on the nonlinear light absorption of fluorescent dyes is a viable tool for the high resolution imaging of tissue. A key limitation for deep tissue imaging is the autofluorescence from intrinsic biomolecules. Here, we report a systematic study that discloses relative autofluorescence interference, which is dependent on the type of tissue and the excitation and emission wavelengths in two-photon imaging. Among the brain, kidney, liver, lung, and spleen mouse tissues examined, the kidney tissue exhibited prominent autofluorescence followed by the liver and others. Notably, regardless of the tissue type, prominent autofluorescence is observed not only from the green emission channel but also from the yellow emission channel where common two-photon absorbing dyes also emit, whereas there is minimal autofluorescence from the red channel. The autofluorescence is slightly influenced by the excitation wavelength. Toward minimal autofluorescence, we developed a new class of two-photon absorbing dyes that are far-red emitting, water-soluble, and very bright inside cells as well as in tissue. A comparative assessment of the imaging depth, which is dependent on the three selected dyes that emit in the blue-green, yellow, and far-red regions, shows the importance of far-red emitting dyes for deep tissue imaging.