Colorimetric Sensor for Cr(VI) Ion Detection in Tap Water Using a Combination of AuNPs and AgNPs

Colorimetric sensors are a promising technique for the simple screening of water, food, and environmental samples contaminated with interferents, allowing for color changes to be observed with the naked eye or a spectrophotometer. In this study, a colorimetric sensor for the selective detection of hexavalent chromium ion (Cr(VI)) contamination in water was developed. A combination of sodium borohydride-coated gold and citrate-capped silver nanoparticles (Na-AuNPs/cit-AgNPs) was employed as a colorimetric probe. Upon the addition of Cr(VI)-contaminated tap water in the colorimetric probe solution, the color sequentially transitioned from its initial orange to dark reddish-purple, dark purplish-red, dark blue-violet, and gray. This colorimetric strategy relies on AgNP dissolution and AuNP aggregation in the presence of the Cr(VI) ions. The dissolution of AgNPs is evidenced by the reduction of the characteristic peak of AgNPs at 400 nm, while the aggregation of AuNPs leads to a red shift in the absorption band at 514 nm, accompanied by broad absorption in the 500-700 nm range. The limits of detections were found to be 22.9 and 50 ppb using a spectrometer and by visual observation, respectively. The synthesized AuNPs and AgNPs are very stable in the presence of media containing complicated ions. We further demonstrated the practical applicability of the developed system for detecting Cr(VI) in real samples, including natural water and artificial urine, highlighting its potential for addressing Cr(VI) contamination in practical scenarios.

Synthesis and Catalytic Degradation of PEF, ENR, and CIP by g-C3N4/TCNQ/Eu Composite

By using melamine as a precursor for the copolymerization process, g-C3N4 and g-C3N4/TCNQ/Eu complexes with various amounts of doping were created. These complexes were then examined using XRD, FT-IR, SEM, TEM, XPS, PL, UV-vis, and I-T. The degradation rates of pefloxacin (PEF), enrofloxacin (ENR), and ciprofloxacin (CIP) were 91.1%, 90.8%, and 93.2% under visible light (λ > 550 nm). The photocatalytic performance of the composite was analyzed, and the best effect was obtained for CIP photocatalysis when Eu doping was 3 mg at 20 °C and pH 7. Kinetic analysis showed that there was a linear relationship between the sample and the photocatalytic time, and the degradation rate was about 5 times that of g-C3N4. The cyclic stability of the g-C3N4/TCNQ/Eu composite sample was found to be good through repeated experiments. UPLC-MS visualizes the degradation process of CIP. The extremely low stability of piperazine ring induced subsequent degradation, followed by the fracture of quinolone ring promoting the complete decomposition of CIP.

Increased Crystallization of CuTCNQ in Water/DMSO Bisolvent for Enhanced Redox Catalysis

Controlling the kinetics of CuTCNQ (TCNQ = 7,7,8,8-tetracyanoquinodimethane) crystallization has been a major challenge, as CuTCNQ crystallizing on Cu foil during synthesis in conventional solvents such as acetonitrile simultaneously dissolves into the reaction medium. In this work, we address this challenge by using water as a universal co-solvent to control the kinetics of crystallization and growth of phase I CuTCNQ. Water increases the dielectric constant of the reaction medium, shifting the equilibrium toward CuTCNQ crystallization while concomitantly decreasing the dissolution of CuTCNQ. This allows more CuTCNQ to be controllably crystallized on the surface of the Cu foil. Different sizes of CuTCNQ crystals formed on Cu foil under different water/DMSO admixtures influence the solvophilicity of these materials. This has important implications in their catalytic performance, as water-induced changes in the surface properties of these materials can make them highly hydrophilic, which allows the CuTCNQ to act as an efficient catalyst as it brings the aqueous reactants in close vicinity of the catalyst. Evidently, the CuTCNQ synthesized in 30% (v/v) water/DMSO showed superior catalytic activity for ferricyanide reduction with 95% completion achieved within a few minutes in contrast to CuTCNQ synthesized in DMSO that took over 92 min.

Gram-Scale Synthesis of 2,5-Difluoro-7,7,8,8-tetracyanoquinodimethane (F2-TCNQ)

The molecule 2,5-difluoro-7,7,8,8-tetracyanoquinodimethane (F₂-TCNQ) is an organic semiconductor with many promising properties, including high charge mobility (μ). However, an efficient gram-scale synthesis of F₂-TCNQ has not been fully documented. Herein, we report a synthesis of F₂-TCNQ via a three-step sequence that affords F₂-TCNQ in 58% cumulative yield. This synthesis was used to prepare more than 1 g of F₂-TCNQ.

Self-assembled kanamycin antibiotic-inorganic microflowers and their application as a photocatalyst for the removal of organic dyes

Construction of hybrid three-dimensional (3D) hierarchical nanostructures via self-assembly of organic and inorganic compounds have recently attracted immense interest from scientists due to their unique properties and promise in a large range of applications. In this article, hybrid flower structures were successfully constructed by self-assembly an antibiotic, kanamycin, with Cu2+. The flower-like morphology was observed by scanning electron microscopy, to be approximately 4 µm in diameter and about 10 nm in thickness. FTIR spectroscopy and X-ray diffraction confirmed the antibiotic-inorganic hybrid structure was uniform composition, and showed crystallinity due to ordered self-assembly. The hybrid flowers showed high photocatalytic activity towards degradation of methyl blue during 240 minutes under visible light irradiation. A possible mechanism of photocatalytic activity was also proposed, that exposes the inherent advantages in using antibiotic-inorganic hybrid flowers as photocatalysts, where self-assembly can be used to generate active, high surface area structures for photodegradation of pollutants.

Arginine-Induced Self-Assembly of Protoporphyrin to Obtain Effective Photocatalysts in Aqueous Media Under Visible Light

The fabrication of controlled supramolecular nanostructures via self-assembly of protoporphyrin IX (PPIX) was studied with enantiomerically pure l-arginine and d-arginine, and we have shown that stoichiometry controlled the morphology formed. The nanostructure morphology was mainly influenced by the delicate balance of π-π stacking interactions between PPIX cores, as well as H-bonding between the deprotonated acidic head group of PPIX with the guanidine head group of arginine. PPIX self-assembled with l-/d-arginine to create rose-like nanoflower structures for four equivalents of arginine that were 5–10 μm in length and 1–4 μm diameter. We employed UV-vis, fluorescence spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR) techniques to characterize the resulting self-assembled nanostructures. Furthermore, we investigated the catalytic activity of PPIX and arginine co-assembled materials. The fabricated PPIX–arginine nanostructure showed high enhancement of photocatalytic activity through degradation of rhodamine B (RhB) with a decrease in dye concentration of around 78–80% under simulated visible radiation.

Polycyclic Aromatic Hydrocarbons (PAHs) in inland aquatic ecosystems: Perils and remedies through biosensors and bioremediation

Polycyclic Aromatic Hydrocarbons (PAHs) are among the most ubiquitous environmental pollutants of high global concern. PAHs belong to a diverse family of hydrocarbons with over one hundred compounds known, each containing at least two aromatic rings in their structure. Due to hydrophobic nature, PAHs tend to accumulate in the aquatic sediments, leading to bioaccumulation and elevated concentrations over time. In addition to their well-manifested mutagenic and carcinogenic effects in humans, they pose severe detrimental effects to aquatic life. The high eco-toxicity of PAHs has attracted a number of reviews, each dealing specifically with individual aspects of this global pollutant. However, efficient management of PAHs warrants a holistic approach that combines a thorough understanding of their physico-chemical properties, modes of environmental distribution and bioaccumulation, efficient detection, and bioremediation strategies. Currently, there is a lack of a comprehensive study that amalgamates all these aspects together. The current review, for the first time, overcomes this constraint, through providing a high level comprehensive understanding of the complexities faced during PAH management, while also recommending future directions through potentially viable solutions. Importantly, effective management of PAHs strongly relies upon reliable detection tools, which are currently non-existent, or at the very best inefficient, and therefore have a strong prospect of future development. Notably, the currently available biosensor technologies for PAH monitoring have not so far been compiled together, and therefore a significant focus of this article is on biosensor technologies that are critical for timely detection and efficient management of PAHs. This review is focussed on inland aquatic ecosystems with an emphasis on fish biodiversity, as fish remains a major source of food and livelihood for a large proportion of the global population. This thought provoking study is likely to instigate new collaborative approaches for protecting aquatic biodiversity from PAHs-induced eco-toxicity.

Molecular O2 Activation over Cu(I)-Mediated C≡N Bond for Low-Temperature CO Oxidation

The activation of molecular oxygen (O₂) is extremely crucial in heterogeneous oxidations for various industrial applications. Here, a charge-transfer complex CuTCNQ nanowire (CuTCNQ NW) array grown on the copper foam was first reported to show CO catalytic oxidation activity at a temperature below 200 °C with the activated O₂ as an oxidant. The molecular O₂ was energetically activated over the Cu(I)-mediated C≡N bond with a lower energy of -1.167 eV and preferentially reduced to ^•O₂^- through one-electron transfer during the activation process by density functional theory calculations and electron paramagnetic resonance. The theoretical calculations indicated that the CO molecule was oxidized by the activated O₂ on the CuTCNQ NW surface via the Eley-Rideal mechanism, which had been further confirmed by in situ diffuse reflectance infrared Fourier transform spectra. These results indicated that the local C≡N bond electron-state engineering could effectively improve the molecular O₂ activation efficiency, which facilitates the low-temperature CO catalytic oxidation. The findings reported here enhance our understanding on the molecular oxygen activation pathway over metal-organic nanocatalysts and provide a new avenue for rational design of novel low-cost, organic-based heterogeneous catalysts.

Oxygen-deficient photostable Cu2O for enhanced visible light photocatalytic activity

Oxygen vacancies in inorganic semiconductors play an important role in reducing electron-hole recombination, which may have important implications in photocatalysis. Cuprous oxide (Cu2O), a visible light active p-type semiconductor, is a promising photocatalyst. However, the synthesis of photostable Cu2O enriched with oxygen defects remains a challenge. We report a simple method for the gram-scale synthesis of highly photostable Cu2O nanoparticles by the hydrolysis of a Cu(i)-triethylamine [Cu(i)-TEA] complex at low temperature. The oxygen vacancies in these Cu2O nanoparticles led to a significant increase in the lifetimes of photogenerated charge carriers upon excitation with visible light. This, in combination with a suitable energy band structure, allowed Cu2O nanoparticles to exhibit outstanding photoactivity in visible light through the generation of electron-mediated hydroxyl (OH˙) radicals. This study highlights the significance of oxygen defects in enhancing the photocatalytic performance of promising semiconductor photocatalysts.

Arginine-induced porphyrin-based self-assembled nanostructures for photocatalytic applications under simulated sunlight irradiation

In this communication, we have investigated the arginine-induced fabrication of porphyrin (TCPP)-based supramolecular nanostructures. These self-assembled porphyrin nanostructures such as nanobelts show enhanced photocatalytic activity for the photodegradation of pollutant Rhodamine B under simulated visible-light irradiation.

Structural, Spectroscopic, and Electrochemical Characterization of Semi-Conducting, Solvated [Pt(NH3)4](TCNQ)2·(DMF)2 and Non-Solvated [Pt(NH3)4](TCNQ)2

The demand for catalysts that are highly active and stable for electron-transfer reactions has been boosted by the discovery that [Pt(NH3)4](TCNQF4)2 (TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) is an efficient catalyst. In this work, we prepare and characterize the two related [Pt(NH3)4]2+ complexes, [Pt(NH3)4](TCNQ)2·(DMF)2 (1) and [Pt(NH3)4](TCNQ)2 (2). Reaction of [Pt(NH3)4](NO3)2 with LiTCNQ in a mixed solvent (methanol/dimethylformamide, 4 : 1 v/v) gives [Pt(NH3)4](TCNQ)2·(DMF)2 (1), whereas the same reaction in water affords [Pt(NH3)4](TCNQ)2 (2). 2 has been previously reported. Both 1 and 2 have now been characterized by single-crystal X-ray crystallography, Fourier-transform (FT)IR, Raman and UV-vis spectroscopy, and electrochemistry. Structurally, in 1, the TCNQ1− anions form infinite stacks with a separation between adjacent anions within the stack alternating between 3.12 and 3.42 Å. The solvated structure 1 differs from the non-solvated form 2 in that pairs of TCNQ1− anions are clearly displaced from each other. The conductivities of pressed pellets of 1 and 2 are both in the semi-conducting range at room temperature. 2 can be electrochemically synthesized by reduction of a TCNQ-modified electrode in contact with an aqueous solution of [Pt(NH3)4](NO3)2 via a nucleation growth mechanism. Interestingly, we discovered that 1 and 2 are not catalysts for the ferricyanide and thiosulfate reaction. Li+ and tetraalkylammonium salts of TCNQ1−/2− and TCNQF41−/2− were tested for potential catalytic activity towards ferricyanide and thiosulfate. Only TCNQF41−/2− salts were active, suggesting that the dianion redox level needs to be accessible for efficient catalytic activity and explaining why 1 and 2 are not good catalysts. Importantly, the origin of the catalytic activity of the highly active [Pt(NH3)4](TCNQF4)2 catalyst is now understood, enabling other families of catalysts to be developed for important electron-transfer reactions.