Role of soil organic matter on the retention and mobility of common plastic additives, Di(2-ethylhexyl) phthalate, bisphenol A and benzophenone, in soil

The objectives of this study were to assess the role of soil organic matter on retaining plastic additives, Di(2-ethylhexyl) phthalate (DEHP), Bisphenol A (BPA) and Benzophenone (BP), to postulate the retention mechanisms and mobility in soil. Batch experiments were conducted for red yellow podzolic soil (OM) and soil subjected to high temperature oxidation at 600 °C for 2 h to remove total organic matter (OMR). Pristine soil, which contains organic matter abbreviated as OM (soil with organic matter) whereas total organic matter removed soil is abbreviated as OMR (organic matter removed soil). The pH edge and kinetic experiments were conducted with 20 g/L soil suspension spiked with 10 mg/L of each additive, whereas 1-20 mg/L concentration range was used in isotherm experiments and analyzed using high performance liquid chromatography. DEHP demonstrated the highest retention, 331 and 615.16 mg/kg in OM and OMR soils respectively, at pH 6.6. However, BPA and BP showed highest retentions of 132 and 128 mg/kg, respectively around pH 4.3 in pristine soil. DEHP interaction with soil OM indicated weak physical bonding whereas chemisorption to OMR soil. In the case of BPA, physisorption governed its interaction with both soil organic matter and mineral fraction. Nevertheless, BP demonstrated chemical interactions with OM and minerals. Desorption of DEHP was close to 100% however, BPA and BP were <15%. Overall, DEHP and BPA could be easily released into soil water and possibly be available for plant uptake while, BP is immobilized in soil.

Functional impacts of polyaniline in composite matrix of photocatalysts: an instrumental overview

The challenges associated with photocatalysts including their agglomeration, electron-hole recombination and limited optoelectronic reactivity to visible light during the photocatalysis of dye-laden effluent make it necessary to fabricate versatile polymeric composite photocatalysts, and in this case the incredibly reactive conducting polyaniline can be employed. The selection of polyaniline among the conducting polymers is based on its proficient functional impacts in composite blends and proficient synergism with other nanomaterials, especially semiconductor catalysts, resulting in a high photocatalytic performance for the degradation of dyes. However, the impacts of PANI in the composite matrix, which result in the desired photocatalytic activities, can only be assessed using multiple characterization techniques, involving both microscopic and spectroscopic assessment. The characterization results play a significant role in the detection of possible points of agglomeration, surface tunability and improved reactivity during the fabrication of composites, which are necessary to improve their performance in the photocatalysis of dyes. Accordingly, studies revealed the functional impacts of polyaniline in composites including morphological transformation, improved surface functionality, reduction in agglomeration and lowered bandgap potential employing different characterization techniques. In this review, we present the most proficient fabrication techniques based on the in situ approach to achieve improved functional and reactive features and efficiencies of 93, 95, 96, 98.6 and 99% for composites in dye photocatalysis.

Carbon-based nanomaterial intervention and efficient removal of various contaminants from effluents - A review

Water treatment is a worldwide issue. This review aims to present current problems and future challenges in water treatments with the existing methodologies. Carbon nanotube production, characterization, and prospective uses have been the subject of considerable and rigorous research around the world. They have a large number of technical uses because of their distinct physical characteristics. Various catalyst materials are used to make carbon nanotubes. This review's primary focus is on integrated and single-treatment technologies for all kinds of drinking water resources, including ground and surface water. Inorganic non-metallic matter, heavy metals, natural organic matter, endocrine-disrupting chemicals, disinfection by-products and microbiological pollutants are among the contaminants that these treatment systems can remediate in polluted drinking water resources. Significant advances in the antibacterial and adsorption capabilities of carbon-based nanomaterials have opened up new options for excluding organic/inorganic and biological contaminants from drinking water in recent years. The advancements in multifunctional nanocomposites synthesis pave the possibility for their use in enhanced wastewater purification system design. The adsorptive and antibacterial characteristics of six main kinds of carbon nanomaterials are single-walled carbon nanotubes, multi-walled carbon nanotubes, graphene, graphene oxide, fullerene and single-walled carbon nanohorns. This review potentially addressed the essential metallic and polymeric nanocomposites, are described and compared. Barriers to use these nanoparticles in long-term water treatment are also discussed.

Catalytic ozonation with vanadium oxide-doped TiO2 nanoparticles for the removal of di-2-ethylhexyl phthalate

Among various plastic additives, di-2-ethylhexyl phthalate (DEHP) has been a great concern due to its high leaching potential and harmful effects on both human and the ecosystem. For the effective oxidation and mineralization of DEHP by ozone in the existing TiO₂ catalytic processes, the heterogeneous catalyst, vanadium oxide (V₂O₅)-incorporated TiO₂ (V₂O₅/TiO₂), was synthesized. The generation of hydroxyl radicals was promoted by cyclic redox reactions of vanadium atoms in V₂O₅/TiO₂ via the increase of surface oxygen vacancies by the replacement of V⁵⁺ species in the lattice of TiO₂. The catalytic ozonation in the presence of V₂O₅/TiO₂ exhibited the significantly higher degradation of DEHP with the pseudo-second-order kinetic constant of 1.7 × 10⁵ mM^-1min^-1 and the removal efficiency of 58.7% after 60 s in 2 mg/L of ozone. The degradation of DEHP was initiated by the shortening of the alkyl-side chain followed by the opening of esterified benzene moieties.

Synthesis and Characterization of 2D-WS2 Incorporated Polyaniline Nanocomposites as Photo Catalyst for Methylene Blue Degradation

2D-WS₂ incorporated polyaniline nanocomposites (WS₂-PANI) with varying WS₂ loadings were synthesized by a facile in situ oxidative polymerization technique which effectively promoted photocatalytic waste-water remediation using methylene blue (MB) as the probe molecules. The physicochemical properties of WS₂-PANI (1-5) nanocomposites were investigated using multifarious techniques such as FT-IR, XRD, BET surface area, TGA, FESEM, and HRTEM. An electron microscopy analysis that was performed using HRTEM analysis confirm the layered structure of WS₂ with periodic planes (100) separated by 0.27 nm. The photocatalytic performance of the WS₂-PANI (1-5) for MB degradation performed under UV photo irradiation clearly showed that 2 wt.% WS₂-PANI outperformed other variants with 93% degradation MB within 90 min. Furthermore, the catalytic material was reusable for five cycles without a significant loss of the catalytic performance.

Phthalates removal from wastewater by different methods - a review

Phthalate esters are commonly used as plasticizers to improve the durability and workability of polymeric materials, locating and identifying them in various contexts has become a major challenge. Because of their ubiquitous use in plastic packaging and personal care items, as well as their tendency to leach out of these materials, phthalates have been detected in a variety of aquatic situations, including surface water, groundwater, drinking water, and wastewater. Phthalate esters have been shown to affect reproductive health and physical growth by disrupting the endocrine system. As a result, developing energy-efficient and effective technologies to eliminate these harmful substances from the atmosphere has become more important and urgent. This paper examines the existing techniques for treating phthalates and degradation mechanisms, as well as knowledge gaps and future research directions. These technologies include adsorption, electrochemical, photocatalysis, membrane filtration and microbial degradation. Adsorption and photo catalysis are the most widely used techniques for phthalate removal, according to the literature survey papers.

Development of magnetic porous coordination polymer adsorbent for the removal and preconcentration of Pb(II) from environmental water samples

A novel porous coordination polymer adsorbent (BTCA-P-Cu-CP) based on a piperazine(P) as a ligand and 1,2,4,5-benzenetetracarboxylic acid (BTCA) as a linker was synthesized and magnetized to form magnetic porous coordination polymer (BTCA-P-Cu-MCP). Fourier transform infrared (FTIR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), field emission scanning electron microscope(FESEM), energy-dispersive X-ray spectroscopy(EDS), CHN, and Brunauer-Emmett-Teller(BET) analysis were used to characterize the synthesized adsorbent. BTCA-P-Cu-MCP was used for removal and preconcentration of Pb(II) ions from environmental water samples prior to flame atomic absorption spectrometry(FAAS) analysis. The maximum adsorption capacity of BTCA-P-Cu-MCP was 582 mg g^-1. Adsorption isotherm, kinetic, and thermodynamic parameters were investigated for Pb(II) ions adsorption. Magnetic solid phase extraction (MSPE) method was used for preconcentration of Pb(II) ions and the parameters influencing the preconcentration process have been examined. The linearity range of proposed method was 0.1-100 μg L^-1 with a preconcentration factor of 100. The limits of detection and limits of quantification for lead were 0.03 μg L^-1 and 0.11 μg L^-1, respectively. The intra-day (n = 7) and inter-day (n = 3) relative standard deviations (RSDs) were 1.54 and 3.43% respectively. The recoveries from 94.75 ± 4 to 100.93 ± 1.9% were obtained for rapid extraction of trace levels of Pb(II) ions in different water samples. The results showed that the BTCA-P-Cu-MCP was steady and effective adsorbent for the decontamination and preconcentration of lead ions from the aqueous environment.

Synthesis of piperazine functionalized magnetic sporopollenin: a new organic-inorganic hybrid material for the removal of lead(II) and arsenic(III) from aqueous solution

The present work describes the successful functionalization/magnetization of bio-polymeric spores of Lycopodium clavatum (sporopollenin) with 1-(2-hydroxyethyl) piperazine. Analytical techniques, i.e., Fourier transform infrared (FT-IR), field emission scanning electron microscope (FESEM), energy-dispersive X-ray spectroscopy (EDS), and vibrating sample magnetometer (VSM), were used to confirm the formation of 1-(2-hydroxyethyl) piperazine-functionalized magnetic sporopollenin (MNPs-Sp-HEP). The proposed adsorbent (MNPs-Sp-HEP) was used for the removal of noxious Pb(II) and As(III) metal ions from aqueous media through a batch-wise method. Different experimental parameters were optimized for the effective removal of selected noxious metal ions. Maximum adsorption capacity (q _m ) 13.36 and 69.85 mg g^-1 for Pb(II) and As(III), respectively, were obtained. Thermodynamic parameters such as free energy (ΔG°), entropy (ΔS°), and enthalpy (ΔH°) were also studied from the adsorption results and were used to elaborate the mechanism of their confiscation. The obtained results indicated that newly adsorbent can be successfully applied for the decontamination of noxious Pb(II) and As(III) from the aqueous environment.

Rattle-type magnetic mesoporous hollow carbon as a high-performance and reusable adsorbent for water treatment

Rattle-type magnetic mesoporous hollow carbon (RMMHC) materials have shown great promise as adsorbents for water treatment. In this work, we report a surfactant-free synthesis of RMMHC nanoparticles (NPs) using magnetite NPs as the core, tetrapropyl orthosilicate, resorcinol and formaldehyde to form the shell followed by carbonization and selective silica etching. The pore size, specific surface area and pore volume of RMMHC NPs can be tuned by varying the carbonization temperature (500, 700 and 900 °C). At the optimized temperature of 700 °C, the RMMHC NPs possess the highest specific surface area of 579 m² g^-1, the largest pore volume of 0.795 cm³ g^-1, and the largest pore size of 7.6 nm among all three samples. The adsorption capacity of optimized RMMHC NPs towards di (2-ethylhexyl) phthalate (a model organic pollutant) reaches as high as 783.1 mg g^-1. Taking advantage of the magnetic property, the adsorbents retain more than 87% of their initial adsorption capacity over five times' reuse.

PES magnetic microspheres: preparation and performance for the removal of endocrine disruptor-BPA

PES magnetic microspheres were prepared via electrospraying and in situ reaction, and they were applied for the removal of BPA.

Synthesis of Polyaniline-Coated Graphene Oxide@SrTiO₃ Nanocube Nanocomposites for Enhanced Removal of Carcinogenic Dyes from Aqueous Solution

The present investigation highlights the synthesis of polyaniline (PANI)-coated graphene oxide doped with SrTiO₃ nanocube nanocomposites through facile in situ oxidative polymerization method for the efficient removal of carcinogenic dyes, namely, the cationic dye methylene blue (MB) and the anionic dye methyl orange (MO). The presence of oxygenated functional groups comprised of hydroxyl and epoxy groups in graphene oxide (GO) and nitrogen-containing functionalities such as imine groups and amine groups in polyaniline work synergistically to impart cationic and anionic nature to the synthesised nanocomposite, whereas SrTiO₃ nanocubes act as spacers aiding in segregation of GO sheets, thereby increasing the effective surface area of nanocomposite. The synthesised nanocomposites were characterised by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The adsorption efficiencies of graphene oxide (GO), PANI homopolymer, and SrTiO₃ nanocubes-doped nanocomposites were assessed by monitoring the adsorption of methylene blue and methyl orange dyes from aqueous solution. The adsorption efficiency of nanocomposites doped with SrTiO₃ nanocubes were found to be of higher magnitude as compared with undoped nanocomposite. Moreover, the nanocomposite with 2 wt % SrTiO₃ with respect to graphene oxide demonstrated excellent adsorption behaviour with 99% and 91% removal of MB and MO, respectively, in a very short duration of time.