Functional nanoemulsion and nanocomposite microparticles as an anticolorectal cancer and antimicrobial agent: applied in yogurt

Great concern for human health has led the food industry to focus on functional products. Microparticles based on nanoemulsions (M1) and nanocomposites (M2) were developed to deliver vital agents against colorectal cancer and microbial infection. The functional microparticles were prepared by coating extra virgin olive oil (EVOO), probiotics, and fig leaves extract with sodium alginate (SA) and whey protein concentrate (WPC) using the freeze drying technique. The antimicrobial, cytotoxic, apoptotic, encapsulation efficiency (EE %), release rate, and antioxidant activity were investigated. The yogurt was loaded with microparticles and evaluated microbiology, chemically, and sensory during storage. The results showed that the size of nanoemulsion and nanocomposite was between 476.1 and 517.7 nm, while the zeta potentials were −30.1 and −34.5 mV, respectively. M2 microparticles recorded the lowest IC50 values against human colorectal cancerous Caco-2 and HCT 116 cell lines: 1.10 μg/mL and 15.34 μg/mL, respectively. The inhibition zones were between 11 to 20 and 9 to 18 mm for M1 and M2, respectively. The highest EE% was 89.20% for EVOO and 91.34% for probiotics in M2 microparticles. The induction period of the EVOO from M1 and M2 microparticles was 15.37 h and 13.09 h, respectively. The antioxidant activity was between 78 and 65.8% for M1 and M2 microparticles, respectively. The probiotics in yogurt with microparticles were more than un-coated cells, and the taste of these samples was acceptable during storage. This study suggests that microencapsulation could be considered an interesting therapeutic tool when EVOO and probiotics are used in functional food.

Designed Mini Protein 20 Mimicking Uricase Encapsulated in ZIF-8 as Nanozyme Biosensor for Uric Acid Detection

This work presents the use of encapsulated mini protein 20 mimicking uricase (mp20)-zeolitic imidazolate framework-8 (ZIF-8) as a bioreceptor for the development of a nanozyme-based electrochemical biosensor for uric acid detection. The electrochemical performance of the biofunctionalized mp20@ZIF-8 on the reduced graphene oxide/screen-printed carbon electrode (rGO/SPCE) was investigated by optimizing operating parameters such as pH, deposition potential, and deposition time using a central composite design-response surface methodology (CCD-RSM). The quadratic regression model was developed to correlate the combination of each variable to the oxidation current density as a response. A significant effect on current response was observed under optimized conditions of pH of 7.4 at −0.35 V deposition potential and 56.56 s deposition time, with p < 0.05 for each interacted factor. The obtained coefficient of determination (R2) value of 0.9992 indicated good agreement with the experimental finding. The developed nanozyme biosensor (mp20@ZIF-8/rGO/SPCE) exhibited high selectivity in the presence of the same fold concentration of interfering species with a detection limit of 0.27 μM, over a concentration range of 1 to 34 μM. The practicality of the tailored biosensor in monitoring uric acid in human serum and urine samples was validated with high-performance liquid chromatography (HPLC) and a commercial uric acid meter. Hence, nanozyme-based is a promising platform that offers a rapid, sensitive, selective, and low-cost biosensor for the non-enzymatic detection of uric acid in biological samples.

Stirred Yogurt as a Delivery Matrix for Freeze-Dried Microcapsules of Synbiotic EVOO Nanoemulsion and Nanocomposite

Nowadays, dairy products are considered a good matrix to deliver many functional substances either vital oils or probiotic cells. Two models of microcapsules were produced from co-encapsulation of extra virgin olive oil (EVOO) nanoemulsion or nanocomposite and synbiotic bacteria (maltodextrin with Lactobacillus acidophilus and Bifidobacterium bifidum) using the freeze-drying technique. These models of microcapsules were added to stirred yogurt, and then its storage effect on microbiology, chemically, and sensory properties were evaluated for 21 days. The average droplet size and zeta potential distribution of EVOO nanoemulsion and nanocomposite were investigated. Also, oxidative stability, microencapsulation efficiency, release profile, and antioxidant activity were studied. The results showed that the average particle size of EVOO nanoemulsion and nanocomposite ranged between 416 and 475 nm, while zeta potential was -39.6 and -33.6 mV, respectively. The induction period of EVOO extracted from nanoemulsion and nanocomposite microcapsules models was 11.30 and 8 h. The microencapsulation efficiency of probiotic and EVOO was determined at 88.84 and 65.61% for the nanoemulsion microcapsules model, while the nanocomposite microcapsules model showed 98.49 and 72%. The two models of microcapsules have boosted the viability of probiotic bacteria inside stirred yogurt than free cells. Also, the presence of microcapsules did not affect the viability of stirred yogurt starter cultures, and high values for the total solid and protein were detected. Therefore, the results recommended that stirred yogurt is a good delivery carrier for highly antioxidant and healthy microcapsules of synbiotic EVOO nanoemulsion and nanocomposite.

Thermodynamic stability, in-vitro permeability, and in-silico molecular modeling of the optimal Elaeis guineensis leaves extract water-in-oil nanoemulsion

Nanoemulsion is a delivery system used to enhance bioavailability of plant-based compounds across the stratum corneum. Elaeis guineensis leaves are rich source of polyphenolic antioxidants, viz. gallic acid and catechin. The optimal E. guineensis leaves extract water-in-oil nanoemulsion was stable against coalescence, but it was under significant influence of Ostwald ripening over 90 days at 25 °C. The in-vitro permeability revealed a controlled and sustained release of the total phenolic compounds (TPC) of EgLE with a cumulative amount of 1935.0 ± 45.7 µgcm-2 after 8 h. The steady-state flux and permeation coefficient values were 241.9 ± 5.7 µgcm-2 h-1 and 1.15 ± 0.03 cm.h-1, respectively. The kinetic release mechanism for TPC of EgLE was best described by the Korsmeyer-Peppas model due to the highest linearity of R2 = 0.9961, indicating super case II transport mechanism. The in-silico molecular modelling predicted that the aquaporin-3 protein in the stratum corneum bonded preferably to catechin over gallic acid through hydrogen bonds due to the lowest binding energies of - 57.514 kcal/mol and - 8.553 kcal/mol, respectively. Thus, the in-silico study further verified that catechin could improve skin hydration. Therefore, the optimal nanoemulsion could be used topically as moisturizer to enhance skin hydration based on the in-silico prediction.

Physicochemical Characterization of Bioactive Compounds in Nanocarriers

The encapsulation of bioactive compounds is an emerging technique for finding new medicines since it provides protection against ambient degradation factors before reaching the target site. Nanotechnology provides new methods for encapsulating bioactive compounds and for drug carrier development. Nanocarriers satisfactorily impact the absorption, distribution, metabolism, and excretion rate when compared to conventional carriers. The nanocarrier material needs to be compatible and bind to the drug and be bio-resorbable. In this context, the physicochemical characterization of encapsulated bioactive compounds is fundamental to guarantee the quality, reproducibility, and safety of the final pharmaceutical product. In this review, we present the physicochemical techniques most used today by researchers to characterize bioactive compounds in nanocarriers and the main information provided by each technique, such as morphology, size, degree of crystallinity, long-term stability, the efficacy of drug encapsulation, and the amount released as a function of time.

Transdermal Delivery Systems of Natural Products Applied to Skin Therapy and Care

Natural products are favored because of their non-toxicity, low irritants, and market reacceptance. We collected examples, according to ancient wisdom, of natural products to be applied in transdermal delivery. A transdermal delivery system, including different types of agents, such as ointments, patches, and gels, has long been used for skin concerns. In recent years, many novel transdermal applications, such as nanoemulsions, liposomes, lipid nanoparticles, and microneedles, have been reported. Nanosized drug delivery systems are widely applied in natural product deliveries. Nanosized materials notably enhance bioavailability and solubility, and are reported to improve the transdermal permeation of many substances compared with conventional topical formulations. Natural products have been made into nanosized biomaterials in order to enhance the penetration effect. Before introducing the novel transdermal applications of natural products, we present traditional methods within this article. The descriptions of novel transdermal applications are classified into three parts: liposomes, emulsions, and lipid nanoparticles. Each section describes cases that are related to promising natural product transdermal use. Finally, we summarize the outcomes of various studies on novel transdermal agents applied to skin treatments.

Design, Optimization, Manufacture and Characterization of Efavirenz-Loaded Flaxseed Oil Nanoemulsions

The formation, manufacture and characterization of low energy water-in-oil (w/o) nanoemulsions prepared using cold pressed flaxseed oil containing efavirenz was investigated. Pseudo-ternary phase diagrams were constructed to identify the nanoemulsion region(s). Other potential lipid-based drug delivery phases containing flaxseed oil with 1:1 m/m surfactant mixture of Tween® 80, Span® 20 and different amounts of ethanol were tested to characterize the impact of surfactant mixture on emulsion formation. Flaxseed oil was used as the oil phase as efavirenz exhibited high solubility in the vehicle when compared to other vegetable oils tested. Optimization of surfactant mixtures was undertaken using design of experiments, specifically a D-optimal design with the flaxseed oil content set at 10% m/m. Two solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, physical and chemical stability. Metastable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and significant isotropic gel (semisolid) and o/w emulsions were observed during phase behavior studies. Droplet sizes ranged between 156 and 225 nm, zeta potential between -24 and -41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487.

Modeling the Effect of Composition on Formation of Aerosolized Nanoemulsion System Encapsulating Docetaxel and Curcumin Using D-Optimal Mixture Experimental Design

The synergistic anticancer effect of docetaxel (DTX) and curcumin (CCM) has emerged as an attractive therapeutic candidate for lung cancer treatment. However, the lack of optimal bioavailability because of high toxicity, low stability, and poor solubility has limited their clinical success. Given this, an aerosolized nanoemulsion system for pulmonary delivery is recommended to mitigate these drawbacks. In this study, DTX- and CCM-loaded nanoemulsions were optimized using the D-optimal mixture experimental design (MED). The effect of nanoemulsion compositions towards two response variables, namely, particle size and aerosol size, was studied. The optimized formulations for both DTX- and CCM-loaded nanoemulsions were determined, and their physicochemical and aerodynamic properties were evaluated as well. The MED models achieved the optimum formulation for DTX- and CCM-loaded nanoemulsions containing a 6.0 wt% mixture of palm kernel oil ester (PKOE) and safflower seed oils (1:1), 2.5 wt% of lecithin, 2.0 wt% mixture of Tween 85 and Span 85 (9:1), and 2.5 wt% of glycerol in the aqueous phase. The actual values of the optimized formulations were in line with the predicted values obtained from the MED, and they exhibited desirable attributes of physicochemical and aerodynamic properties for inhalation therapy. Thus, the optimized formulations have potential use as a drug delivery system for a pulmonary application.

Cellulose nanocrystals/nanofibrils loaded astaxanthin nanoemulsion for the induction of apoptosis via ROS-dependent mitochondrial dysfunction in cancer cells under photobiomodulation

The present study investigated effects of low-level laser therapy with cellulose nanocrystals/cellulose nanofibrils loaded in nanoemulsion (NE) against skin cancer cells on apoptosis. The nanoemulsion was fabricated and characterized by the standard methods. The toxicity level by cytotoxicity assays, generation of reactive singlet oxygen (ROS) and antioxidant potential, cell proliferation and migration were confirmed by using standard assays. The cellular uptake efficacy was evaluated by differential staining. The protein levels of EGFR, PI3K, AKT, ERK, GAPDH, and β-actin were detected by western blot. The samples showed a spherical shaped structure with the average size confirmed strong and stable hydrogen bonding forces with high degradation temperature and endothermic transition peaks. The fabricated samples showed no toxicity and high cell proliferation by generating more singlet oxygen levels and antioxidants. The intracellular signaling pathways was regulated with high protein expression levels, which was stimulated by specific molecules for cell proliferation, migration, and differentiation in cancer cells. The results proved that combined treatment regulated the intracellular signaling pathways in cancer cells. The current study showed a novel strategy for improving therapeutic efficacy of nanoemulsion by using low-level laser therapy. Further, the current favorable outcomes will be evaluated in in vivo animal models.

Ultrasound-mediated fucoxanthin rich oil nanoemulsions stabilized by κ-carrageenan: Process optimization, bio-accessibility and cytotoxicity

This work aims to produce and optimize a κ-carrageenan-based nanoemulsion (NE) to encapsulate seaweed oil, which is rich in fucoxanthin (FX), using ultrasound-assisted emulsification. κ-Carrageenan was produced using subcritical water, and seaweed oil was extracted using supercritical carbon dioxide with sunflower oil as the co-solvent. Response surface methodology (RSM) was used to understand the influence of several process parameters such as ultrasound amplitude, time, temperature, and duty cycle to produce an NE. The RSM factor was used to focus on droplet size, polydispersity index, zeta potential, viscosity, antioxidant, FX, encapsulation efficiency, and emulsion stability. Our outcomes suggested that the ultrasound process had a noteworthy influence on the NE. The best conditions to obtain an NE were an ultrasound amplitude of 87 µm, a sonication time of 394 s, a temperature of 60 °C, and a duty cycle of 50%. The resulting NE was studied by UV-Vis, Fourier-transform infrared spectroscopy, thermal gravimetric analysis, differential scanning calorimetry, scanning electron microscopy, atomic force microscopy, and X-ray diffraction. Moreover, the NE obtained from optimized conditions was checked for fatty acid content, color, oxidative stability, in vitro digestion, bioaccessibility of FX, and cytotoxicity. The results obtained suggest that lower droplet size of the emulsion can improve oxidative stability, in vitro digestion, bioaccessibility of FX, and good cell inhibition against a few cell lines. Therefore, a κ-carrageenan-stabilized NE can be used as a potential delivery system to endorse applications of seaweed oil, which is rich in FX, in functional foods, beverage systems, and pharmaceuticals.

A new alternative insight of nanoemulsion conjugated with κ-carrageenan for wound healing study in diabetic mice: In vitro and in vivo evaluation

Astaxanthin and alpha-tocopherol have attracted great attention because of their properties for the management of wound healing in diabetics. This study aimed to investigate the wound healing study of astaxanthin and alpha-tocopherol with κ-carrageenan nanoemulsion (AS-TP@KCNE) and to perform a histopathological study on streptozotocin (STZ)-induced diabetic mice. AS-TP@KCNE were also evaluated with aim of maintaining an effective and prolonged antidiabetic potential. KC@SENE and KC@USNE were obtained by spontaneous and ultrasonication emulsification methods and were characterized for stability, pH, particle size, and zeta potential by standard analysis. In vitro cytotoxicity and wound healing results demonstrated less toxicity and faster cell migration for the nanoemulsions at different concentrations. Based on the promising results, transdermal administration of AS-TP@KCNE can significantly restore the body weight, reduce fasting blood glucose levels, and improve glucose tolerance, which improved the ability to quickly heal of wounds in diabetic mice compared to control. In conclusion, the present study shows that the AS-TP@KCNE are biocompatible and possess healing properties that accelerate wound closure and exhibited better control of hyperglycemia and more superbly reversed the diabetes mellitus complications than STZ-induced diabetic mice. These results suggested that AS-TP@KCNE could be a promising platform for wound healing applications for diabetics.

Optimization of Quercetin loaded Palm Oil Ester Based Nanoemulsion Formulation for Pulmonary Delivery

In this research, the palm oil ester (POE)- based nanoemulsion formulation containing quercetin for pulmonary delivery was developed. The nanoemulsion formulation was prepared by high energy emulsification method and then further optimized using D-optimal mixture design. The concentration effects of the mixture of POE:ricinoleic acid (RC), ratio 1:1 (1.50-4.50 wt.%), lecithin (1.50-2.50 wt.%), Tween 80 (0.50-1.00 wt.%), glycerol (1.50-3.00 wt.%), and water (88.0-94.9 wt.%) towards the droplet size were investigated. The results showed that the optimum formulation with 1.50 wt.% POE:RC, 1.50 wt.% lecithin, 1.50 wt.% Tween 80, 1.50 wt.% glycerol and 93.90 % water was obtained. The droplet size, polydispersity index (PDI) and zeta potential of the optimized formulation were 110.3 nm, 0.290 and －37.7 mV, respectively. The formulation also exhibited good stability against storage at 4℃ for 90 days. In vitro aerosols delivery evaluation showed that the aerosols output, aerosols rate and median mass aerodynamic diameter of the optimized nanoemulsion were 99.31%, 0.19 g/min and 4.25 µm, respectively. The characterization of physical properties and efficiency for aerosols delivery results suggest that POE- based nanoemulsion containing quercetin has the potential to be used for pulmonary delivery specifically for lung cancer treatment.