Cross-linker engineered poly(hydroxyethyl methacrylate) hydrogel allows photodynamic and photothermal therapies and controlled drug release

Here, we disclose the synthesis of poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels incorporating a squaraine dye (Sq) as a chemical crosslinker, viz. Sq@PHEMA. Photothermal and photodynamic features of Sq@PHEMA hydrogels are evaluated in detail. It is noteworthy that Sq@PHEMA induces hyperthermia upon irradiation with an 808 nm laser. Furthermore, Sq@PHEMA enables the generation of reactive oxygen species (ROS) upon irradiation with red light. To our delight, Sq@PHEMA hydrogels can be used as efficient dual photosensitizers pertinent to both PDT and PTT simultaneously. Finally, the hydrogels are loaded with methotrexate (MTX) to investigate controlled drug release behavior. It is noted that Sq@PHEMA hydrogels are promising candidates as drug delivery systems since on-demand MTX release is feasible upon irradiation. In summary, we effectively demonstrate that hydrogel cross-linker engineering allows for synergistic photodynamic and photothermal therapy. Furthermore, drug delivery is also feasible with the Sq@PHEMA core.

Recent developments in photodynamic therapy and its application against multidrug resistant cancers

Recently, photodynamic therapy (PDT) has received a lot of attention for its potential use in cancer treatment. It enables the therapy of a multifocal disease with the least amount of tissue damage. The most widely used prodrug is 5-aminolevulinic acid, which undergoes heme pathway conversion to protoporphyrin IX, which acts as a photosensitizer (PS). Additionally, hematoporphyrin, bacteriochlorin, and phthalocyanine are also studied for their therapeutic potential in cancer. Unfortunately, not every patient who receives PDT experiences a full recovery. Resistance to different anticancer treatments is commonly observed. A few of the resistance mechanisms by which cancer cells escape therapeutics are genetic factors, drug-drug interactions, impaired DNA repair pathways, mutations related to inhibition of apoptosis, epigenetic pathways, etc. Recently, much research has been conducted to develop a new generation of PS based on nanomaterials that could be used to overcome cancer cells' multidrug resistance (MDR). Various metal-based, polymeric, lipidic nanoparticles (NPs), dendrimers, etc, have been utilized in the PDT application against cancer. This article discusses the detailed mechanism by which cancer cells evolve towards MDR as well as recent advances in PDT-based NPs for use against multidrug-resistant cancers.

Photosensitive Chitosan-Based Injectable Hydrogel Chemically Cross-Linked by Perylene Bisimide Dopamine with Robust Antioxidant and Cytotoxicity Enhancer Properties for In Vitro Photodynamic Therapy of Breast Cancer

Here, we report the fabrication of an antioxidant photosensitizing hydrogel system based on chitosan (CS-Cy/PBI-DOPA) covalently cross-linked with perylene bisimide dopamine (PBI-DOPA) as a photosensitizer. The severe insolubility and low tumor selectivity limitations of perylene were overcome by conjugation with dopamine and then to the chitosan hydrogel. The mechanical and rheological study of CS-Cy/PBI-DOPA photodynamic antioxidant hydrogels illustrated interconnected microporous morphologies with high elasticity, swelling ability, and suitable shear-thinning behavior. Bio-friendly properties, such as biodegradability and biocompatibility, excellent singlet oxygen production abilities, and antioxidant properties were also delivered. The antioxidant effects of the hydrogels control the physiological levels of reactive oxygen species (ROS) generated by photochemical reactions in photodynamic therapy (PDT), which are responsible for oxidative damage to tumor cells while protecting normal cells and tissues from ROS damage, including blood and endothelial cells. In vitro, PDT tests of hydrogels were conducted on two human breast cancer cell lines, MDA-MB-231 and MCF-7. These hydrogels offered more than 90% cell viability in the dark and good photocytotoxicity performance with 53 and 43% cell death for MCF-7 and MDA-MB-231 cells, which confirmed their promising potential for cancer therapeutic applications.

Synthesis and characterization of novel Schiff base-silicon (IV) phthalocyanine complex for photodynamic therapy of breast cancer cell lines

BACKGROUND

Photodynamic therapy is an alternative anticancer treatment approach that promises high therapeutic efficacy. In this study, it is aimed to investigate the PDT-mediated anticancer effects of newly synthesized silicon phthalocyanine (SiPc) molecules on MDA-MB-231, MCF-7 breast cancer cell lines, and non-tumorigenic MCF-10A breast cell line.

METHODS

Novel bromo substituted Schiff base (3a), its nitro homolog (3b), and their silicon complexes (SiPc-5a and SiPc-5b) were synthesized. Their proposed structures were confirmed by FT-IR, NMR, UV-vis and MS instrumental techniques. MDA-MB-231, MCF-7 and MCF-10A cells were illuminated at a light wavelength of 680 nm for 10 min, giving a total irradiation dose of 10 j/cm². MTT assay was used to determine the cytotoxic effects of SiPc-5a and SiPc-5b. Apoptotic cell death was analyzed using flow cytometry. Changes in the mitochondrial membrane potential were determined by TMRE staining. Intracellular ROS generation was observed microscopically using H₂DCFDA dye. Colony formation assay and in vitro scratch assay were performed to analyze the clonogenic activity and cell motility. Transwell migration and matrigel invasion analyzes were conducted to observe changes in the migration and invasion status of the cells.

RESULTS

The combination of SiPc-5a and SiPc-5b with PDT exhibited cytotoxic effects on cancer cells and triggered cell death. SiPc-5a/PDT and SiPc-5b/PDT decreased mitochondrial membrane potential and increased intracellular ROS production. Statistically significant changes were detected in cancer cells' colony-forming ability and motility. SiPc-5a/PDT and SiPc-5b/PDT reduced cancer cells' migration and invasion capacities.

CONCLUSION

The present study identifies PDT-mediated antiproliferative, apoptotic, and anti-migratory characteristics of novel SiPc molecules. The outcomes of this study emphasize the anticancer properties of these molecules and suggest that they may be evaluated as drug-candidate molecules for therapeutic purposes.

Current state of knowledge on intelligent-response biological and other macromolecular hydrogels in biomedical engineering: A review

Because intelligent hydrogels have good biocompatibility, a rapid response, and good degradability as well as a stimulus response mode that is rich, hydrophilic, and similar to the softness and elasticity of living tissue, they have received widespread attention and are widely used in biomedical engineering. In this article, we conduct a systematic review of the use of smart hydrogels in biomedical engineering. First, we introduce the properties and applications of hydrogels and compare the similarities and differences between traditional hydrogels and smart hydrogels. Secondly, we summarize the intelligent hydrogel types, the mechanisms of action used by different hydrogels, and the materials for preparing different types of hydrogels, such as the materials for the preparation of temperature-responsive hydrogels, which mainly include gelatin, carrageenan, agarose, amylose, etc.; summarize the morphologies of different hydrogels, such as films, fibers and microspheres; and summarize the application of smart hydrogels in biomedical engineering, such as for the delivery of proteins, antibiotics, deoxyribonucleic acid, etc. Finally, we summarize the shortcomings of current research and present future prospects for smart hydrogels. The purpose of this paper is to provide researchers engaged in related fields with a systematic review of the application of intelligent hydrogels in biomedical engineering. We hope that they will get some inspiration from this work to provide new directions for the development of related fields.

An antibacterial chitosan-based hydrogel as a potential degradable bio-scaffold for alveolar ridge preservation

Post-extraction, preventing the absorption of alveolar ridge to retain the supporting construction for implanted teeth is still a challenge. Herein, we developed modified chitosan (CS)-based hydrogel using N-hydroxysuccinimide-terminated 4-arm poly (ethylene glycol) (4-arm-PEG-NHS) as the crosslinking agent, after introducing it to the polyhexamethyleneguanidine hydrochloride (PHMB) solution, CS/PEG/PHMB hydrogel with the enhanced antibacterial properties was obtained. The CS/PEG hydrogel and CS/PEG/PHMB hydrogel prepared here showed excellent mechanical strength and their compressive strength could reach 440 kPa and 450 kPa, respectively. The composite hydrogel was designed to be directional porous, low cytotoxic, pH-sensitive, and degradable. The weight of the hydrogel was reduced by ∼30% after 28 days of incubation, and it swelled significantly in the acidic condition while it did not swell in the neutral and weakly alkaline environments, indicating an excellent biodegradability in the inflammation site. In vitro antibacterial experiments showed that the bacteriostatic rate of the CS/PEG/PHMB hydrogel against S. aureus was above 90%, which could effectively inhibit the spread of the bacteria and inflammation in the alveolar ridge. Additionally, the hybrid hydrogels demonstrated good biocompatibility with the NIH 3T3 fibroblast cells. Overall, the CS/PEG/PHMB hydrogel is a promising biological scaffold for maintaining the alveolar ridge and subsequently improving the success rate of the dental implant.

Preparation of porphyrin and phthalocyanine conjugates for biomedical applications

The aim of this review is to offer a succinct overview of the main synthetic techniques used in the preparation of conjugates containing porphyrins, including chlorins and bacteriochlorins and phthalocyanines for biomedical applications and photodynamic therapy (PDT). To illustrate the conjugation techniques representative examples from the literature will be presented.

Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.

Bioinspired Self-Healable Polyallylamine-Based Hydrogels for Wet Adhesion: Synergistic Contributions of Catechol-Amino Functionalities and Nanosilicate

Recently, many studies have been reported on functional adhesives that are applicable in wet conditions as well as in air conditions. In this study, a novel polymer hydrogel that mimics the mussel foot proteins (Mfps) was designed as an adhesive that can adhere strongly to various substrates in wet conditions. Polyallylamine-hydrocaffeic acid (PAA-CA) conjugates were synthesized to introduce the catechol moiety into the PAA backbone. The PAA-CA hydrogels were simply prepared by controlling the pH to enable the formation of a dynamic imine bond via the Schiff base reaction without any additional cross-linking agents. Owing to its residual amino groups, the PAA-CA hydrogel showed improved adhesive strength in wet conditions, which was found to be ∼4.7 times higher than in dry conditions. In addition, dual-cross-linked PAA-CA hydrogels were prepared by the addition of laponite (LP). The synergistic effect of the dynamic imine bonds and ionic bonds of the PAA-CA/LP nanocomposite hydrogels led to improved mechanical and self-healing properties. PAA-based hydrogels have great potential for more diverse applications than those of the commercial adhesives.

Injectable Single-Component Peptide Depot: Autonomously Rechargeable Tumor Photosensitization for Repeated Photodynamic Therapy

The general practice of photodynamic therapy (PDT) comprises repeated multiple sessions, where photosensitizers are repeatedly administered prior to each operation of light irradiation. To address potential problems arising from the total overdose of photosensitizer by such repeated injections, we here introduce an internalizing RGD peptide (iRGD) derivative (Ppa-iRGDC-BK01) that self-aggregates into an injectable single-component supramolecular depot. Ppa-iRGDC-BK01 is designed as an in situ self-implantable photosensitizer so that it forms a depot by itself upon injection, and its molecular functions (cancer cell internalization and photosensitization) are activated by sustained release, tumor targeting, and tumor-selective proteolytic/reductive cleavage of the iRGD segment. The experimental and theoretical studies revealed that when exposed to body temperature, Ppa-iRGDC-BK01 undergoes thermally accelerated self-assembly to form a supramolecular depot through the hydrophobic interaction of the Ppa pendants and the reorganization of the interpeptide hydrogen bonding. It turned out that the self-aggregation of Ppa-iRGDC-BK01 into a depot exerts a multiple-quenching effect on the photosensitivity to effectively prevent nonspecific phototoxicity and protect it from photobleaching outside the tumor, while enabling autonomous tumor rephotosensitization by long sustained release, tumor accumulation, and intratumoral activation over time. We demonstrate that depot formation through a single peritumoral injection and subsequent quintuple laser irradiations at intervals resulted in complete eradication of the tumor. During the repeated PDT, depot-implanted normal tissues around the tumor exhibited no phototoxic damage under laser exposure. Our approach of single-component photosensitizing supramolecular depot, combined with a strategy of tumor-targeted therapeutic activation, would be a safer and more precise operation of PDT through a nonconventional protocol composed of one-time photosensitizer injection and multiple laser irradiations.

Design of nanostructure chitosan hydrogels for carrying zinc phthalocyanine as a photosensitizer and difloxacin as an antibacterial agent

Here, we develop homogeneous hydrogel networks containing zinc tetraamino-phthalocyanine (ZnTAPc) as photosensitizer cross-linked with glutaraldehyde. The cross-linking process occurs via imine bond formation by reaction of NH₂ groups of ZnTAPc and chitosan with aldehyde groups of the glutaraldehyde. Insertion of ZnTAPc interestingly increases its solubility in water medium. 2.0% and 4% w/w of the ZnTAPc were used with respect to chitosan polymer to generate hydrogel photosensitizer. FT-IR and UV-Vis spectroscopy, scanning electron microscopy, and rheological measurements were applied to evaluate the properties of the prepared hydrogels. Finally, difloxacin HCl was selected as a fluoroquinolone drug for the assessment of the drug release features of the made hydrogels. The difloxacin release was affected by the amount of ZnTAPc and pH medium. The activity of the hydrogels in photosensitizing process was considered by computing the rate of 1,3-diphenylisobenzofuran adsorption reduction as a singlet oxygen chemical quencher.

Photocatalytic coatings based on a zinc(ii) phthalocyanine derivative immobilized on nanoporous gold leafs with various pore sizes

A series of singlet oxygen sensitizing hybrid materials is reported consisting of a zinc(ii) phthalocyanine (ZnPc) derivative immobilized on nanoporous gold leafs (npAu) with various pore sizes. The resulting photocatalytic coatings exhibit a thickness of around 100 nm and pore sizes between 9–50 nm. Herein, we report the synthesis and characterization of those hybrid materials which were synthesized by functionalization of npAu leafs by an azide terminated alkanethiol self-assembled monolayer (SAM) and subsequent copper catalyzed azide–alkyne cycloaddition (CuAAC). The characterization of the samples morphology included scanning electron microscopy (SEM), UV-Vis spectroscopy as well as energy dispersive X-ray spectroscopy (EDX). The morphology–reactivity relationship was investigated employing the hybrid photocatalysts in the photooxidation of diphenylisobenzofuran (DPBF) as selective singlet oxygen quencher. An increasing photocatalytic activity was found for smaller pore sizes up to 15 nm, due to the gain in specific surface area concomitant with an increasing amount of immobilized photosensitizer, completely dominating the effect of the higher spectral overlap caused by the shift of the plasmon resonance of npAu, until mass transport and diffusion limitation gets predominant for pore sizes below 15 nm.

A series of hybrid materials consisting of a zinc(ii) phthalocyanine derivative immobilized on nanoporous gold leafs with various pore sizes was prepared and investigated regarding its singlet oxygen sensitization activity.

Injectable Hydrogels for Cancer Therapy over the Last Decade

The interest in injectable hydrogels for cancer treatment has been significantly growing over the last decade, due to the availability of a wide range of starting polymer structures with tailored features and high chemical versatility. Many research groups are working on the development of highly engineered injectable delivery vehicle systems suitable for combined chemo-and radio-therapy, as well as thermal and photo-thermal ablation, with the aim of finding out effective solutions to overcome the current obstacles of conventional therapeutic protocols. Within this work, we have reviewed and discussed the most recent injectable hydrogel systems, focusing on the structure and properties of the starting polymers, which are mainly classified into natural or synthetic sources. Moreover, mapping the research landscape of the fabrication strategies, the main outcome of each system is discussed in light of possible clinical applications.

Hydrogels: soft matters in photomedicine

Photodynamic therapy (PDT), a shining beacon in the realm of photomedicine, is a non-invasive technique that utilizes dye-based photosensitizers (PSs) in conjunction with light and oxygen to produce reactive oxygen species to combat malignant tissues and infectious microorganisms. Yet, for PDT to become a common, routine therapy, it is still necessary to overcome limitations such as photosensitizer solubility, long-term side effects (e.g., photosensitivity) and to develop safe, biocompatible and target-specific formulations. Polymer based drug delivery platforms are an effective strategy for the delivery of PSs for PDT applications. Among them, hydrogels and 3D polymer scaffolds with the ability to swell in aqueous media have been deeply investigated. Particularly, hydrogel-based formulations present real potential to fulfill all requirements of an ideal PDT platform by overcoming the solubility issues, while improving the selectivity and targeting drawbacks of the PSs alone. In this perspective, we summarize the use of hydrogels as carrier systems of PSs to enhance the effectiveness of PDT against infections and cancer. Their potential in environmental and biomedical applications, such as tissue engineering photoremediation and photochemistry, is also discussed.

Hydrogels Based on Schiff Base Linkages for Biomedical Applications

Schiff base, an important family of reaction in click chemistry, has received significant attention in the formation of self-healing hydrogels in recent years. Schiff base reversibly reacts even in mild conditions, which allows hydrogels with self-healing ability to recover their structures and functions after damages. Moreover, pH-sensitivity of the Schiff base offers the hydrogels response to biologically relevant stimuli. Different types of Schiff base can provide the hydrogels with tunable mechanical properties and chemical stabilities. In this review, we summarized the design and preparation of hydrogels based on various types of Schiff base linkages, as well as the biomedical applications of hydrogels in drug delivery, tissue regeneration, wound healing, tissue adhesives, bioprinting, and biosensors.

Photosensitizers Used in the Photodynamic Therapy of Rheumatoid Arthritis

Photodynamic Therapy (PDT) has become one of the most promising treatment against autoimmune diseases, such as rheumatoid arthritis (RA), as well as in the treatment of different types of cancer, since it is a non-invasive method and easy to carry out. The three main ingredients of PDT are light irradiation, oxygen, and a photosensitizer (PS). Light irradiation depends on the type of molecule or compound to be used as a PS. The concentration of O2 fluctuates according to the medium where the target tissue is located and over time, although it is known that it is possible to provide oxygenated species to the treated area through the PS itself. Finally, each PS has its own characteristics, the efficacy of which depends on multiple factors, such as solubility, administration technique, retention time, stability, excitation wavelength, biocompatibility, and clearance, among others. Therefore, it is essential to have a thorough knowledge of the disease to select the best PS for a specific target, such as RA. In this review we will present the PSs used in the last three decades to treat RA under PDT protocol, as well as insights on the relevant strategies.

Synergistic Effect in Zinc Phthalocyanine—Nanoporous Gold Hybrid Materials for Enhanced Photocatalytic Oxidations

Nanoporous gold (npAu) supports were prepared as disks and powders by corrosion of Au-Ag alloys. The npAu materials have pore sizes in the range of 40 nm as shown by scanning electron microscopy (SEM). The surface was modified by a self-assembled monolayer (SAM) with an azidohexylthioate and then functionalized by a zinc (II) phthalocyanine (ZnPc) derivative using “click chemistry”. By atomic absorption spectroscopy (AAS) and inductively coupled plasma mass spectrometry (ICP-MS) the content of zinc was determined and the amount of immobilized ZnPc on npAu was calculated. Energy-dispersive X-ray (EDX) spectroscopy gave information about the spatial distribution of the ZnPc throughout the whole porous structure. NpAu and ZnPc are both absorbing light in the visible region, therefore, the heterogeneous hybrid systems were studied as photocatalysts for photooxidations using molecular oxygen. By irradiation of the hybrid system, singlet oxygen is formed, which was quantified using the photooxidation of 1,3-diphenylisobenzofuran (DPBF) as a selective singlet oxygen quencher. The illuminated surface area of the npAu-ZnPc hybrid system and the coverage of the ZnPc were optimized. The synergistic effect between the plasmon resonance of npAu and the photosensitizer ZnPc was shown by selective irradiation and excitation of only the phthalocyanine, the plasmon resonance of the npAu support and both absorption bands simultaneously, resulting in an enhanced photooxidation activity by nearly an order of magnitude.

Functional Supramolecular Gels Based on the Hierarchical Assembly of Porphyrins and Phthalocyanines

Supramolecular gels containing porphyrins and phthalocyanines motifs are attracting increased interests in a wide range of research areas. Based on the supramolecular gels systems, porphyrin or phthalocyanines can form assemblies with plentiful nanostructures, dynamic, and stimuli-responsive properties. And these π-conjugated molecular building blocks also afford supramolecular gels with many new features, depending on their photochemical and electrochemical characteristics. As one of the most characteristic models, the supramolecular chirality of these soft matters was investigated. Notably, the application of supramolecular gels containing porphyrins and phthalocyanines has been developed in the field of catalysis, molecular sensing, biological imaging, drug delivery and photodynamic therapy. And some photoelectric devices were also fabricated depending on the gelation of porphyrins or phthalocyanines. This paper presents an overview of the progress achieved in this issue along with some perspectives for further advances.

A review on applications of chitosan-based Schiff bases

Biopolymers have become very attractive as they are degradable, biocompatible, non-toxic and renewable. Due to the intrinsic reactive amino groups, chitosan is vibrant in the midst of other biopolymers. Using the versatility of these amino groups, various structural modifications have been accomplished on chitosan through certain chemical reactions. Chemical modification of chitosan via imine functionalization (RR'CNR″; R: alkyl/aryl, R': H/alkyl/aryl and R″: chitosan ring) is significant as it recommends the resultant chitosan-based Schiff bases (CSBs) for the important applications in the fields like biology, catalysis, sensors, water treatment, etc. CSBs are usually synthesized by the Schiff condensation reaction between chitosan's amino groups and carbonyl compounds with the removal of water molecules. In this review, we first introduce the available synthetic approaches for the preparation of CSBs. Then, we discuss the biological applications of CSBs including antimicrobial activity, anticancer activity, drug carrier ability, antioxidant activity and tissue engineering capacity. Successively, the applications of CSBs in other fields such as catalysis, adsorption and sensors are demonstrated.

A Dual-Enzyme Hydrogen Peroxide Generation Machinery in Hydrogels Supports Antimicrobial Wound Treatment

The aging population and accompanying diseases like diabetes resulted in an increased occurrence of chronic wounds. Topical wound treatment with antimicrobial agents to inhibit bacterial invasion and promote wound healing is often associated with difficulties. Here, we investigated the potential of succinyl chitosan (SC)-carboxymethyl cellulose (CMC) hydrogels which constantly release clinically relevant levels of hydrogen peroxide (H₂O₂). CMC hydrogel matrix was in situ converted by limited hydrolysis by a cellulase into substrates accepted by cellobiose dehydrogenase (CDH) for continuous production of H₂O₂ (30 μM over 24 h). This dual-enzyme catalyzed in situ H₂O₂ generation system proved its antimicrobial activity in a zone of inhibition (ZOI) assay best simulating the application as wound dressing and was found to be biocompatible toward mouse fibroblasts (95% viability). The hydrogels were thoroughly characterized regarding their rheological properties indicating fast gel formation (<3 min) and moderate cross-linking (1.5% strain, G' = 10 Pa). Cooling (fridge conditions) was found to be the simple on/off switch of the enzymatic machinery which is of great importance regarding storage and applicability of the bioactive hydrogel. This robust and bioactive antimicrobial hydrogel system overcomes dosing issues of common topical wound treatments and constitutes a promising wound healing approach for the future.

A reactive oxygen species (ROS)-responsive low molecular weight gel co-loaded with doxorubicin and Zn(ii) phthalocyanine tetrasulfonic acid for combined chemo-photodynamic therapy

A ROS-responsive low molecular weight hydrogel was fabricated and loaded with an anticancer drug and a photosensitizer for efficient chemo-photodynamic therapy.

Water-soluble, neutral 3,5-diformyl-BODIPY with extended fluorescence lifetime in a self-healable chitosan hydrogel

3,5-Diformyl-BODIPY cross-linked chitosan-based hydrogels exhibit fluorescence resonance energy transfer (FRET) dynamics, water solubility, self-healing ability and good values of BODIPY fluorescence lifetimes.