Polyethyleneimine capped silver nanoclusters based turn-off-on fluorescence sensor for the determination of glutathione

A polyethyleneimine capped silver nanoclusters (PEI-AgNCs) based turn-off-on fluorescence sensor has been developed to determine glutathione (GSH) effectively. The fluorescence intensity of silver nanoclusters (AgNCs) has been quenched by Cu(II) and recovered by adding GSH. The quenching of fluorescence intensity of PEI-AgNCs by Cu(II) and recovery of the emission intensity of PEI-AgNCs after the addition of GSH is supposed to be ground state adduct formation. Due to the greater affinity of Cu(II) towards GSH compared to that to PEI-AgNCs, the defragmentation of PEI-AgNCs-Cu(II) adduct occurs after the addition of GSH to the solution, resulting in the recovery of emission intensity of PEI-AgNCs. Characterisation studies of the probe have been done using FT-IR spectroscopy, XPS analysis, XRD analysis, UV-visible and Fluorescence spectrophotometry, EDX spectroscopy and TEM analysis. Different experimental parameters were optimised. Under optimised analytical conditions, the sensor showed a wide linear range for the quantification of GSH from 1.00 × 10-4 M to 3.00 × 10-6 M with a detection limit (LOD) of 8.00 × 10-7 M. Selectivity and interference studies were done in the presence of different structurally similar and coexisting species of GSH in blood. The practical utility of the proposed sensor has been validated in artificial blood serum.

A Zn-modified PCN-224 fluorescent nanoprobe for selective and sensitive turn-on detection of glutathione

Monitoring endogenous glutathione (GSH) levels in living cells is essential for cancer diagnose and treatment. In this work, GSH responsive fluorescent nanoprobe with turn-on property was constructed using Zn-modified porphyrinic metal-organic frameworks (PCN-224-Zn). The introduced Zn2+ could quench the fluorescence of PCN-224 by the metallization of organic ligand (TCPP) and serves as sensing site for GSH. When exposed to GSH, the strong binding affinity of GSH generates the formation of Zn-GSH complex, eliminating the fluorescence quenching effect of Zn2+. Based on the constructed PCN-224-Zn nanoprobe, selective determination of GSH was achieved in the range of 0.01-6 μM with a detection limit of 1.5 nM. Furthermore, the constructed nanoprobe can realize the fluorescence imaging of endogenous GSH in MCF-7 and HeLa cells. Meanwhile, PCN-224-Zn could also monitor GSH in cell lysate with recovery rates from 93.8 % to 102.3 %. The performance of PCN-224-Zn demonstrates its capacities in the application of fluorescence sensing and bio-imaging fields.

Two-dimensional oxygen-deficient ZnO1-x nanosheet as a highly selective and sensitive fluorescence probe for ferritin detection: the electron transfer biosensor (ETBS)

Iron proteins are of great scientific interest due to their importance as an excellent biomarker for human diseases. Ferritin (Fe3+), being an iron-rich blood protein, is related to various diseases like anemia and cancer. For the first time, we have developed a highly sensitive and selective ferritin biosensor based on fluorescent oxygen-deficient zinc oxide nanosheets through hydrothermal and probe-ultrasonication combined methods. The fluorescence study showed an intense bluish-green fluorescence at λex = 370 nm, after optimization at different excitation wavelengths. In addition, the fluorescence of ZnO1-x nanosheets can be efficiently quenched due to electron transfer reactions in order to achieve quantification analysis. The limit of detection (LOD) was calculated to be 0.015 nM (7.2 ng mL-1) with high linearity (R2 = 0.9930). In addition, the real-world application of the proposed biosensor has been performed on human blood serum samples in the presence of various interfering analytes showing high selectivity and sensitivity with a regression value R2 = 0.9980 indicating the current approach is an excellent biosensor platform.

Density Functional Theory Study of Cu6 Nanoclusters as a Phenylalanine Detector

Research on amino acids is an attractive area because of their application in metabolism, cancer treatment, growth, and repair of body tissue, and RNA and DNA syntheses. Twenty amino acids are primarily responsible for protein synthesis. In our study, we used a Cu6 nanocluster as an amino acid detector. For the investigation, we adsorbed amino acids on the Cu6 nanocluster and studied their UV-visible spectra. It is observed that all of the Cu6-amino acid complexes have peaks at near 380 nm wavelength except the Cu-phenylalanine complex, where two UV-visible peaks are found at wavelengths 351 nm (excitation energy 3.49 eV) and 403 nm (excitation energy 3.02 eV), respectively, which originated from the HOMO - 2 to LUMO (28%) and HOMO - 1 to LUMO (38%) transitions. Due to this unique transition, the Cu6 nanocluster can be used for the detection of the phenylalanine amino acid out of the 20 amino acids.

Naphthalene Diimide-Based Orange Emitting Luminogen: A Fluorometric Probe for Thiol Sensing through the Click Reaction

Fluorometric sensors have gained considerable attention in various fields, including environmental monitoring, biomedical research, and clinical diagnostics. This article delineates the fabrication of an orange emitting naphthalene diimide (NDI) derivative consisting of maleimide moiety (NDI-mal) for fluorometric sensing of thiols. Spherical shaped organic nanoparticles (∼100-150 nm) were constructed by NDI-mal in dimethyl sulfoxide (DMSO)/dimethylformamide (DMF)-water through J-type aggregation. NDI-mal displayed self-assembly driven aggregation-induced emission (AIE) through excimer formation at λem= 588 nm at fw = 99 vol % DMSO/DMF-water. Naphthyl residue at both terminals of NDI-mal facilitates intramolecular charge transfer (ICT) from the donor naphthyl residue to the acceptor NDI core. The fluorescence intensity of NDI-mal fluorescent organic nanoparticles (FONPs) got quenched in the presence of thiols due to thiol-maleimide adduct formation (Michael addition). NDI-mal FONPs selectively probed thiol functionalized small molecules (4-aminothiophenol), biomolecules (glutathione (GSH)), and proteins (reduced BSA) with high sensitivity having a limit of detection of 15.3 nM, 6.0 nM, and 9.2 ng/mL, respectively. Importantly, thiol sensing was selective against analogous small molecules, biomolecules, and proteins devoid of thiol moieties. Cellular imaging demonstrated selective diagnosis of cancer cells by NDI-mal FONPs through quenching of its emission upon interaction with thiols in B16F10 cells due to the high abundance of GSH in cancer cells compared to NIH3T3 cells. NDI-mal FONPs emitted their native fluorescence inside cells subjected to reactive oxygen species mediated thiol oxidation via Fenton's reaction. Notably, GSH-maleimide adduct formation by NDI-mal FONPs displayed notable therapeutic efficacy against cancer cells having ∼2.4-fold higher killing of B16F10 in comparison to NIH3T3 cells possibly through oxidative stress induced apoptosis owing to the depletion in the GSH level. Thus, NDI-mal AIE-gen successfully emerged as a selective and sensitive probe toward thiols through thiol-maleimide click chemistry with therapeutic ability against cancer cells in the absence of systematic intervention.

One-step synthesis of a pH switched pyrene-based fluorescent probe for ratiometric detection of HS- in real water samples

Only a few probes are suited for highly acidic environments and sensitive to pH values below 4. Thus, finding a solution for detecting strong acidic (pH value below 2) conditions is still challenging. Herein, we constructed and created a pH-switched fluorescent probe based on pyrene and a heteroatom containing pyridine unit. When exposed to acidic environments (pH 2.0), the probe's fluorescence redshifted with distinct colour and fluorescence changes owing to protonation on the nitrogen atom containing pyridine moiety, which could be deprotonated by HS- selectively compared to other competing analytes. Pyr can detect HS- with a rapid response within 5 s and showed very good quantum yield under acidic environments. The sensing mechanism was confirmed by Density Functional Theory (DFT) studies using the B3LYP and 6-31G+ (d) basis sets. Furthermore, the probe was utilized to monitor HS- in actual water samples and identify H2S gas by a simple paper strip test.

In-situ formation of MnO2 nanoparticles on Ru@SiO2 nanospheres as a fluorescent probe for sensitive and rapid detection of glutathione

Glutathione (GSH)-switched fluorescent assays have appealed much attention due to rapid signal changes of fluorescent probes. However, exposure to exterior environment of fluorescent probe causes photobleaching and premature leakage, leading to low sensitivity and poor photostability. Herein, luminescent SiO₂ nanoparticles encapsulated with Ru(bpy)₃²⁺ (Ru@SiO₂) were designed and synthesized as fluorescent probe to construct a GSH-switched fluorescent assay. The encapsulation of Ru(bpy)₃²⁺ in the SiO₂ nanoparticles could effectively prevent the leakage of Ru(bpy)₃²⁺ molecules, improving the photostability of probe. The fluorescence of Ru@SiO₂ nanoparticles was quenched by coating MnO₂ nanoparticles on Ru@SiO₂ surface (Ru@SiO₂@MnO₂ nanocomposites) through an in situ growth approach, which reduced background of the assay. The MnO₂ nanoparticles not only further inhibited the leakage of Ru(bpy)₃²⁺ molecules, but also could serve as a recognition unit of GSH. In the presence of GSH, the MnO₂ nanoparticles on the surface of Ru@SiO₂ nanoparticles were reduced to Mn²⁺, resulting the fluorescence recovery of Ru@SiO₂ nanoparticles. Thus, a signal-on fluorescent strategy was constructed for GSH detection. The assay displayed good analytical performance for GSH detection with a low detection limit of 16.2 nM due to excellent fluorescence quenching ability of MnO₂ nanoparticles and special role of Ru@SiO₂ nanoparticles to block probe leakage. The proposed assay was also applied to measure GSH levels in human serum samples. This work paves a new way to detect GSH with high sensitivity.

Enzyme-free colorimetric detection of biothiols based on the photoinduced oxidation of 3,3',5,5'-tetramethylbenzidine

Realizing the rapid and on-site detection of biothiols in complex biological and food samples using simple assays and devices remains a major challenge. In this study, biothiols containing sulfhydryl groups were found to be able to inhibit the photo-triggered oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). Based on the discovery, using the commercially available and low-cost TMB as the chromogenic substrate, an enzyme-free colorimetric approach was developed for the rapid determination of biothiols. The method does not involve the introduction of any natural enzymes, nanoenzymes, and external oxidants. The mechanisms of the photoinduced oxidation of TMB and the detection of biothiols were proposed. Furthermore, a smartphone-based portable device integrated with test strips was constructed by the 3D printing technique. This device can simultaneously meet the requirements of the photocatalytic oxidation reaction of TMB and the detection of biothiols. The entire process only takes less than 5 min. The successful detection of cysteine in urine and milk samples demonstrates the great potential of the device in the on-site assays.

Highly selective and sensitive detection of glutathione over cysteine and homocysteine with a turn-on fluorescent biosensor based on cysteamine-stabilized CdTe quantum dots

In this work, cysteamine (CA) stabilized CdTe quantum dots (QDs) (CA-CdTe QDs) and sodium citrate stabilized gold nanoparticles (AuNPs) were prepared. Because of the strong electrostatic interaction and spectral overlap of emission spectrum of CA-CdTe QDs and absorption spectrum of AuNPs, a highly effective fluorescence resonance energy transfer (FRET) system was formed and the fluorescence of CA-CdTe QDs was strongly quenched. The synthesized CA-CdTe and AuNPs were self-assembled to large clusters due to the electrostatic attraction and the fluorescence of CA-CdTe was sharply quenched as a result of FRET. Under the optimum pH of 5.5, the positive GSH could assemble with negative AuNPs through electrostatic interaction and destroy the FRET system of CA-CdTe and AuNPs, due to the red shift of absorption wavelength of AuNPs caused by aggregation. The fluorescence of CA-CdTe recovered, and the recovered fluorescence efficiency shows a linear function against the GSH concentrations from 6.7 nM to 0.40 μM, with a detecting limit of 3.3 nM. The quenched emission of CA-CdTe could be recovered attributed to the aggregation of AuNPs by GSH. Under optimal conditions, the sensing system was successfully applied in the detection of GSH in real human blood plasma samples with a recovery of 99.5-102.3%, showing a promising future for the highly sensitive and selective GSH detection in the human blood plasma samples.

A Simple Colorimetric Assay for Sensitive Cu2+ Detection Based on the Glutathione-Mediated Etching of MnO2 Nanosheets

In this paper, we developed a quick, economical and sensitive colorimetric strategy for copper ions (Cu²⁺) quantification via the redox response of MnO₂ nanosheets with glutathione (GSH). This reaction consumed MnO₂ nanosheets, which acted as a catalyst for the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to a blue product (oxTMB). In the presence of Cu²⁺, the GSH was catalyzed to GSSG (oxidized glutathione), and the solution changed from colorless to deep blue. Under the optimum conditions, the absorption signal of the oxidized product (oxTMB) became proportional to Cu²⁺ concentration in the range from 10 to 300 nM with a detection limit of 6.9 nM. This detection system showed high specificity for Cu²⁺. Moreover, the system has been efficaciously implemented for Cu²⁺ detection in actual tap water samples. The layered-nanostructures of MnO₂ nanosheets make it possess high chemical and thermal stability. TMB can be quickly oxidized within 10 min by the catalyzing of MnO₂ nanosheets with high oxidase-like activity. There is no need of expensive reagents, additional H₂O₂ and complicated modification processes during the colorimetric assay. Therefore, the strategy primarily based on MnO₂ nanosheets is promising for real-time, rapid and highly sensitive detection of Cu²⁺ under practical conditions.

A ratiometric fluorescence platform composed of MnO2 nanosheets and nitrogen, chlorine co-doped carbon dots and its logic gate performance for glutathione determination

Illustration of the principle of a dual-emission ratiometric fluorescence strategy for the selective detection of GSH based on an N, Cl-CD-assisted MnO2 nanosheet–OPD system.

Turning waste into treasure: chicken eggshell membrane derived fluorescent carbon nanodots for the rapid and sensitive detection of Hg2+ and glutathione

Herein, a green, economical, and waste-utilization approach is reported for the synthesis of water-soluble carbon nanodots (C-Dots) with a high fluorescence quantum yield of 19.5%. As a common protein-rich waste, eggshell membrane was selected as a cost-effective and ideal precursor to prepare C-Dots using the microwave method. The as-prepared C-Dots showed a maximum emission at 375 nm with an excitation wavelength at 235 nm. The fluorescent C-Dots were adopted as a sensitive probe for the rapid detection of Hg²⁺ and glutathione (GSH) based on the fluorescence off and on (turn-off-on) strategy. This was ascribed to the fact that Hg²⁺ could effectively quench the fluorescence of the C-Dots and GSH was able to prevent fluorescence quenching owing to the specific binding between Hg²⁺ and GSH. The designed method exhibited a high sensitivity and selectivity towards the detection of Hg²⁺ and GSH. Under the optimized conditions, the method showed a good linear relationship with Hg²⁺ concentration in the range from 100 nM to 50 μM with a detection limit of 32.0 nM. For GSH detection, it displayed a linear range from 50 nM to 10 μM with a detection limit of 9.8 nM. Moreover, this method was successfully applied to detect GSH in human serum samples. The eggshell derived fluorescent C-Dots pave the way for economical environmental and biological analyses.

Near infrared imaging of intracellular GSH by AuNCs@MnO2 core-shell nanoparticles based on the absorption competition mechanism

Dynamically monitoring intracellular glutathione (GSH), a crucial biomarker of oxidative stress, is of significance for the diagnosis and treatment of certain diseases. Although manganese dioxide (MnO2) based GSH fluorescent sensors have exhibited high sensitivity and good selectivity owing to the specific reactivity between GSH and MnO2, near-infrared (NIR) MnO2 based nanoprobes for GSH detection are scarce. Herein, we have developed a NIR activatable fluorescence nanoprobe for the imaging and determination of intracellular GSH based on a core-shell nanoparticle, consisting of NIR emitted gold nanocluster doped silica as the fluorescent core and manganese dioxide as the GSH-responsive shell (named AuNCs@MnO2). Due to the absorption competition mechanism, the outer MnO2 shell rather than the inner AuNCs core preferentially absorbed the excitation light, thus leading to fluorescence quenching of the inner AuNCs core. Upon addition of GSH, the fluorescence of the nanoprobe restored along with the reduction of MnO2 to Mn2+ because of the absorption competition disappearance-induced emission. The activatable fluorescence linearly increased upon changing the GSH concentration in the range of 2 to 5000 μM with a detection limit of 0.67 μM. The cytotoxicity test shows that the AuNCs@MnO2 nanoprobes have a good biocompatibility. After entering the cancer cells, the intracellular GSH degraded the outermost MnO2 shell and initiated the NIR fluorescence restoration of AuNCs, which can be used to monitor the dynamic change of intracellular GSH. This strategy provides an NIR-activatable way to detect GSH levels in living cells and offers a promising platform for the diagnosis and treatment of GSH-related diseases.

An ultrasensitive colorimetric and fluorescence dual-readout assay for glutathione with a carbon dot-MnO2 nanosheet platform based on the inner filter effect

An ultrasensitive colorimetric and fluorescence dual-readout assay based on the inner filter effect (IFE) was developed for glutathione (GSH) determination, in which carbon dots (C-dots) were used as a fluorophore and MnO₂ nanosheets as an absorber. Due to the excellent optical absorption properties of MnO₂ nanosheets and the good spectral overlap between the fluorophore and absorber, MnO₂ nanosheets could effectively quench the fluorescence of C-dots via the IFE. As the target, GSH could reduce MnO₂ nanosheets to Mn²⁺ ions, which inhibited the IFE and resulted in the fading of solution color and the recovery of the fluorescence signal. And these two kinds of signals were respectively used for qualitative and quantitative detection of GSH. The results showed that this proposed assay could distinguish 10 μM GSH with the naked eye and quantitatively detect GSH within the concentration range of 0.1–400 μM. The limit of detection was 6.6 nM. Moreover, this assay showed sensitive responses in human serum and urine samples, which indicated that this IFE-based assay has great potential in GSH-related clinical and bioanalytical applications.

An ultrasensitive colorimetric and fluorescence dual-readout assay based on carbon dot–MnO₂ nanosheets platform was developed for GSH detection in human body fluid samples.

Turn-on fluorescent glutathione detection based on lucigenin and MnO2 nanosheets

In this work, a glutathione (GSH) sensing nano-platform using lucigenin as a fluorescent probe in the presence of MnO2 nanosheets was reported for the first time. Unlike the earlier fluorescent detection systems based on MnO2 nanosheets, which depend on Förster resonance energy transfer (FRET) or the dynamic quenching effect (DQE), the mechanism of the quenching process of MnO2 nanosheets on lucigenin fluorescence was attributed mainly to a static quenching effect (SQE) with a minor contribution of the inner filter effect (IFE). A double exponential fluorescence decay of lucigenin was obtained in various MnO2 nanosheet concentrations as a result of their SQE and IFE. Based on this phenomenon and taking advantage of the redox reaction between GSH and MnO2 nanosheets, we have developed a switch-on sensitive fluorescent method for GSH via the recovery of the MnO2 nanosheet-quenched fluorescence of lucigenin. A good linearity range of 1.0-150.0 μM with a low limit of detection (S/N = 3) of 180.0 nM was achieved, revealing the higher sensitivity for GSH determination in comparison with the previously reported MnO2 nanosheet-based turn-on fluorescent methods. The developed fluorescent nano-platform exhibits excellent selectivity with successful application for GSH detection in human serum plasma, indicating its good practicability for GSH sensing in biological and clinical applications.

A fluorescence strategy for monitoring α-glucosidase activity and screening its inhibitors from Chinese herbal medicines based on Cu nanoclusters with aggregation-induced emission

Herein, the self-assembly of 1-dodecanethiol-capped Cu nanoclusters (DT-Cu NCs) is obtained by annealing of dibenzyl ether solution of nanoclusters. These aggregates are composed of small clusters and emit a high level of aggregation-induced emission (AIE) in water. Based on the quenching effect of 4-nitrophenol (4-NP) on DT-Cu NCs, a fluorescence strategy is developed to monitor α-glucosidase (α-Glu) activity and screen its inhibitors from Chinese herbal medicines. 4-Nitrophenyl-α-D-glucopyranoside (NGP) is selected as the substrate, which is further hydrolyzed to yield 4-NP through the catalysis of α-Glu. The quenching efficiency is positively correlated to the concentration of α-Glu. Furthermore, the inhibitory effects of the extracts from four Chinese herbal medicines (i.e., the rind of Punica granatum L., Momordica grosvenorii Swingle., Crataegus pinnatifida Bge., and Lycium barbarum L.) on the α-Glu activity have been studied. The IC₅₀ values of extracts from the rind of Punica granatum L. and Momordica grosvenorii Swingle are 0.23 and 0.37 g/L, respectively, so they show obvious inhibitory effects on α-Glu. The extracts of Crataegus pinnatifida Bge. and Lycium barbarum L. exhibit relatively weak inhibitory effects. Hence, the proposed strategy can be applicable for screening α-Glu inhibitors from Chinese herbal medicines. Last but not the least, by immobilizing DT-Cu NCs into agarose hydrogels in polyethylene tubes, a visual device is fabricated to screen α-Glu inhibitors with high throughput and sensitivity.

Ratiometric fluorescence sensing of glutathione by using the oxidase-mimicking activity of MnO2 nanosheet

In this work, a facile ratiometric fluorescence sensor for GSH measurement was designed based on MnO₂ nanosheet (NS), carbon dots (CDs), as well as a simple substrate o-phenylenediamine (OPD). Herein, MnO₂ NS played triple essential roles in the sensing system. First, it could be reduced by GSH through a special reaction, and therefore served as GSH recognizer. Second, it played as a fluorescence nanoquencher to strongly quench the fluorescence of CDs. Third, it could directly oxidize OPD to yield a luminescent product 2, 3-diaminophenazine (DAP) via the intrinsic oxidase-like activity. It revealed that MnO₂ NS could be reduced to Mn²⁺ in the presence of GSH. Thus its oxidase-like activity and fluorescence quenching abilities were inhibited, which then restricted the generation of DAP and recovered the fluorescence of CDs. Based on this phenomenon, a novel ratiometric fluorescence sensor for GSH determination was fabricated by measuring the ratio of fluorescent intensity of DAP to that of CDs. Besides, the constructed ratiometric fluorescent sensor, which could be facilely operated with single-wavelength excitation, exhibited high sensitivity and selectivity with a wider linear range and a lower detection limit.

In situ fabrication of a luminescent copper nanocluster/eggshell membrane composite and its application in visual detection of Ag+ ions, light-emitting diodes and surface patterning

In this work, we report a novel strategy for fabricating a luminescent 2D nanocomposite at room temperature by in situ generation of luminescent copper nanoclusters (Cu NCs) embedded in natural monolithic eggshell membrane (ESM) using dithiothreitol as the reducing and capping agent. The established fabrication is facile, cost-effective and viable. The as-prepared Cu NC/ESM nanocomposite exhibited excellent photoluminescence performance, improved chemical, thermal and photo stability, convenient tailoring and flexibility. Significantly, the nanocomposites could be employed as test strips for the visual detection of Ag⁺ ions based on the luminescence quenching phenomenon and as color conversion layers in light-emitting diodes. Furthermore, application of the proposed strategy for surface luminescence patterning was well demonstrated, indicating great potential in biomass based anti-counterfeiting, information encryption and security paper or sheets.

Intracellular Imaging of Glutathione with MnO2 Nanosheet@Ru(bpy)32+-UiO-66 Nanocomposites

Fluorescent detection of glutathione (GSH) in the living system has attracted much attention, but current fluorescent probes are usually exposed to the exterior environment, leading to photobleaching and premature leakage and subsequently limiting the sensitivity and photostability. Herein, luminescent metal-organic frameworks [Ru(bpy)₃²⁺ encapsulated in UiO-66] coated with manganese dioxide nanosheets [MnO₂ NS@Ru(bpy)₃²⁺-UiO-66] were prepared by an in situ growth method and further explored to construct a GSH-switched fluorescent sensing platform. Because of the splendid fluorescence quenching ability, special probe leakage blocking role and distinguished recognition of the MnO₂ NS, and the improved fluorescence of Ru(bpy)₃²⁺ by UiO-66, a low background, highly sensitive and selective detection of GSH with a low limit of detection as 0.28 μM was realized. At the same time, the preparation of MnO₂ NS@Ru(bpy)₃²⁺-UiO-66 nanocomposites is simple and less toxic, and there was no notable loss of cell survivability after being exposed to MnO₂ NS@Ru(bpy)₃²⁺-UiO-66 below the concentrations of 120 μg mL^-1 for 24 h. Consequently, the results coming from this effort suggest that the new sensing platform will have a great potential in the detection of GSH in living cells.

Exploring the behavior of gold nanostar@reduced graphene oxide composite in chemiluminescence: Application to highly sensitive detection of glutathione

Gold nanostar@reduced graphene oxide (GNS@rGO) nanocomposite was used as a catalyst in a chemiluminescence (CL) reaction. Composites with different sizes of gold nanostars were prepared without any surfactant, and characterized by transmission electron microscopy, UV-visible, FT-IR and Raman spectroscopy. We showed that GNS@rGO can strongly enhance the intensity of luminol‑sodium periodate CL system and the larger the GNS size, the greater the enhancing effect. This effect results from the unique catalytic action of GNS@rGO, which leads to the acceleration of reactive oxygen species generation. We also found that a remarkable increase in the CL intensity of GNS@rGO-luminol-NaIO₄ system occurs in the presence of glutathione (GSH). Based on this observation, a simple and highly sensitive CL probe was developed for detection of GSH. Under the optimum conditions, the calibration curve exhibits a linear range from 1.0 nM to 1.0 μM for GSH with a detection limit of 0.2 nM. The developed method was applied to the detection of GSH in human plasma samples.

Interfacial engineering of carbon dots with benzenediboronic acid for fluorescent biosensing

Glucose assay is highly important in clinical diagnostics of diabetes. Herein, we engineered the surface of carbon dots by complexation with functional ligand and constructed fluorescent biosensors for the detection of hydrogen peroxide and glucose. In this study, benzenediboronic acid is conjugated to the surface of citric acid-derived carbon dots through formation of boronate complexes with the nanoparticles. The oxidation of benzenediboronic acid with hydrogen peroxide effectively quenches fluorescence of carbon dots through electron transfer process. The sensing performance of the system according to different engineered surfaces of carbon dots was studied by using carbon dots derived from various precursors and different benzenediboronic acid analogues. As a simple mix-and-detect strategy, this system is facilely applied for glucose sensing as hydrogen peroxide is the product catalyzed by glucose oxidase. The benzenediboronic acid-conjugated carbon dots derived from citric acid act as excellent optical probes for sensitive analysis of glucose with detection limit of 0.4 μM. This sensing system shows great selectivity toward interferent species such as analogues of glucose, and can be used to determine glucose in human serum. Engineering the surface of carbon dots by complexation with ligand of interest provides a feasible way to facilitate the development of biological applications.

Human serum albumin templated MnO2 nanosheets are oxidase mimics for colorimetric determination of hydrogen peroxide and for enzymatic determination of glucose

This paper reports on a colorimetric assay for H₂O₂ and glucose. It is based on the use of human serum albumin-templated MnO₂ nanosheets that possess oxidase-like activity. They are capable of oxidizing 3,3',5,5'-tetramethylbenzidine (TMB) with oxygen to give a blue product (oxTMB) with an absorbance maximum at 652 nm. When H₂O₂ is introduced, the MnO₂ nanosheets are reduced to Mn(II) ions, and this inhibits the formation of oxTMB. Based on these findings, a colorimetric assay was established for H₂O₂ that has a 0.56 μM detection limit. If glucose is oxidized by glucose oxidase under formation of H₂O₂, the nanosheets can be used to quantify H₂O₂ and thereby to sense glucose. Response is linear in the 0.5 μM to 50 μM glucose concentration range, and the detection limit is 0.32 μM. The method was applied to the determination of glucose in spiked serum samples and gave satisficatory results. Graphical abstract Human serum albumin (HSA) is used as a template for the synthesis of MnO₂ nanosheet. These possess oxidase mimicking activity. H₂O₂ can reduce the nanosheets. The effect is exploited in colorimetric assays for H₂O₂ and glucose using tetramethylbenzidine (TMB) as a chromogenic substrate.

Determination of the activity of alkaline phosphatase by using nanoclusters composed of flower-like cobalt oxyhydroxide and copper nanoclusters as fluorescent probes

The authors describe a sensitive fluorometric method for the determination of the activity of alkaline phosphatase (ALP). It is based on the use of a composite prepared consisting of flower-like cobalt oxyhydroxide (CoOOH) and copper nanoclusters (CuNCs). On formation of the CuNC-CoOOH aggregates, the fluorescence of the CuNCs is quenched by the CoOOH sheets. If, however, the CoOOH sheets are reduced to Co(II) ions in the presence of ascorbic acid (AA), fluorescence recovers. AA is formed in-situ by hydrolysis of the substrate ascorbic acid 2-phosphate (AA2P) as catalyzed by ALP. Thus, the ALP activity can be detected indirectly by kinetic monitoring of the increase in fluorescence, best at excitation/emission wavelengths of 335/410 nm. The assay allows ALP to be determined in 0.5 to 150 mU·mL^-1 activity range and with a 0.1 mU·mL^-1 detection limit. The method was successfully applied to the determination of ALP activity in (spiked) human serum samples. The assay has attractive features in being of the off-on type and immune against false positive results. Graphical Abstract A fluorescent bioassay is reported for the determination of the activity of alkaline phosphatase (ALP). It is exploiting the ascorbic acid (AA)-induced decomposition of nanoclusters composed of flower-like cobalt oxyhydroxide and copper nanoclusters. ALP catalyzes hydrolysis of ascorbic acid 2-phosphate (AA2P) and dephosphorylation to form AA.

Poly(β-cyclodextrin) enhanced fluorescence coupled with specific reaction for amplified detection of GSH and trypsin activity

Schematic illustration of the construction process of a specific-reaction assay coupled with βCDP-induced signal amplification platform.