Rapid ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drop for simultaneous spectrophotometric determination of selected anionic dyes in food samples

Ion pair-based surfactant-assisted liquid-liquid microextraction with solidification of floating organic drops has been developed to extract Allura red (AR), tartrazine (TAR), and fast green (FG) prior to spectrophotometric determination. Cetyltrimethylammonium bromide (CTAB) was employed as ion-pairing agent to enhance the hydrophobic behavior of anionic dyes. 1-undecanol and ethanol were used as the extraction and dispersion solvents, respectively. The dyes were quantitatively extracted in the presence of KCl (0.15 mol L-1) at pH 4.0. The method exhibits wide linearity (15.0-1500.0 μg L-1 for AR, 35.0-2000.0 μg L-1 for TAR, and 3.0-1200.0 μg L-1 for FG) with preconcentration factors of 19.6, 20.1, and 19.9, respectively. The detection limit was 3.7. 9.5, and 0.83 μg L-1 for AR, TAR, and FG, respectively. The relative standard deviation did not exceed 2.1 %. The procedure was applied for the determination of these dyes in food samples.

Solid supports and supported liquid membranes for different liquid phase microextraction and electromembrane extraction configurations. A review

Liquid phase microextraction (LPME) and electromembrane microextraction (EME) can be considered as two of the most popular techniques in sample treatment today. Both techniques can be configurated as membrane-assisted techniques to carry out the extraction. These supports provide the required geometry and stability on the contact surface between two phases (donor and acceptor) and improve the reproducibility of sample treatment techniques. These solid support pore space, once is filled with organic solvents, act as a selective barrier acting as a supported liquid membrane (SLM). The SLM nature is a fundamental parameter, and its selection is critical to carry out successful extractions. There are numerous SLMs that have been successfully employed in a wide variety of application fields. The latter is due to the specificity of the selected organic solvents, which allows the extraction of compounds of a very different nature. In the last decade, solid supports and SLM have evolved towards "green" and environmentally friendly materials and solvents. In this review, solid supports implemented in LPME and EME will be discussed and summarized, as well as their applications. Moreover, the advances and modifications of the solid supports and the SLMs to improve the extraction efficiencies, recoveries and enrichment factors are discussed. Hollow fiber and flat membranes, including microfluidic systems, will be considered depending on the technique, configuration, or device used.

Chemometric approach for the spectrophotometric determination of chloramphenicol in various food matrices: Using natural deep eutectic solvents

A novel, simple and green temperature controlled-natural deep eutectic solvent emulsification liquid-liquid microextraction (TC-NADES-LLME) coupled with UV-vis spectrophotometry was optimized for preconcentration and measurement of chloramphenicol (CAP) in eggs, milks honeys and chicken meat. Four different NADES were prepared and investigated for the efficient extraction of CAP. The important parameters (pH, NADES-3 vol, Fe(III) amount and extraction temperature) affecting the extraction efficiency of the TC-NADES-LLME procedure were investigated and optimized using a chemometric approach. In this study, Fe(III), NADES-3 and extraction temperature were used as complexing agent, extraction solvent and emulator accelerator, respectively. Using optimized values, the linear range of the TC-NADES-LLME procedure was in the range of 0.1-300 µg L^-1 with a coefficient of determination of 0.9991. The detection limit and enhancement factor were 0.03 µg L^-1 and 285, respectively. The precision of the method has been confirmed in repeatability and reproducibility studies. Relative standard deviation of these studieswas<4.2 %. The matrix effect was investigated by adding three different CAP concentrations to the selected samples, and the results indicated the low matrix effect of the method. The TC-NADES-LLME procedure was successfully applied to determine and extract CAP in the selected samples.

An overview on nanostructure-modified supported liquid membranes for the electromembrane extraction method

Electromembrane extraction (EME) is an extraction method on the micro scale, in which charged compounds are extracted from a donor phase (sample solution) into an acceptor phase via a supported liquid membrane (SLM) containing a water-immiscible organic solvent. To enhance the extraction efficiency and selectivity in this method, some studies have focused on the modification of the SLM, and thus many strategies have been reported for this purpose. One of these techniques is the introduction of nanomaterials in the SLM structure, which can enhance the extraction efficiency. In the current study, the different nanostructures used for SLM modification in the EME method are reviewed. Furthermore, the related analytical parameters of the developed techniques are classified and tabulated. It is hoped that this review will motivate further research in this field using other nanostructures.

Electromembrane extraction of polar substances - Status and perspectives

In this article, the scientific literature on electromembrane extraction (EME) of polar substances (log P < 2) is reviewed. EME is an extraction technique based on electrokinetic migration of analyte ions from an aqueous sample, across an organic supported liquid membrane (SLM), and into an aqueous acceptor solution. Because extraction is based on voltage-assisted partitioning, EME is fundamentally suitable for extraction of polar and ionizable substances that are challenging in many other extraction techniques. The article provides an exhaustive overview of papers on EME of polar substances. From this, different strategies to improve the mass transfer of polar substances are reviewed and critically discussed. These strategies include different SLM chemistries, modification of supporting membranes, sorbent additives, aqueous solution chemistry, and voltage/current related strategies. Finally, the future applicability of EME for polar substances is discussed. We expect EME in the coming years to be developed towards both very selective targeted analysis, as well as untargeted analysis of polar substances in biomedical applications such as metabolomics and peptidomics.

Ultrasound-assisted electromembrane extraction of clonazepam from plasma and determination using capillary electrophoresis

In this work, ultrasound-assisted electromembrane extraction (UA-EME) coupled with capillary electrophoresis (CE) and diode array detection (DAD) was developed for the determination of clonazepam from plasma samples. A comparative study was carried out between conventional EME and UA-EME methods to investigate the influence of the ultrasound waves on the extraction efficiency. The central composite design was used for the optimization of the variables affecting these methods to achieve the best extraction efficiency. Under optimal extraction conditions, the UA-EME provided better extraction recovery in a shorter time (58% in 13 min) than the EME method (42% in 30 min). Ultrasound reduces the extraction time and increased recovery by reducing the thickness of the barrier layer. In addition, this method provided a higher pre-concentration factor (203) and a lower limit of detection (3 ng mL^-1) with good repeatability (RSDs were less than 10.11%).

Solvent stir bar microextraction technique with three-hollow fiber configuration for trace determination of nitrite in river water samples

In this work, trace determination of nitrite in river water samples was studied using solvent stir bar microextraction system with three-hollow fiber configuration (3HF-SSBME) as a preconcentration step prior to UV-Vis spectrophotometry. The obtained results showed that the increase in the number of solvent bars can improve the extraction performance by increasing the contact area between acceptor and sample solutions. The extraction process relies on the well-known oxidation-reduction reaction of nitrite with iodide excess in acidic donor phase to form triiodide, and then its extraction into organic acceptor phase using a cationic surfactant. Various extraction parameters affecting the method were optimized and examined in detail. Detection limit of 1.6 μg L^-1 and preconcentration factor of 282 can be attained after an extraction time of 8 min under the optimum conditions of this technique. The proposed method showed a linear response up to 1000 μg L^-1 (r² = 0.996) with relative standard deviation values less than 4.0%. The accuracy of the developed method was assessed using the Griess technique. Finally, the proposed method was successfully employed for quantification of nitrite in river water samples (Ghezelozan, Zanjan, Iran).

Electromembrane extraction-Recent trends and where to go

Electromembrane extraction (EME) is an analytical microextraction technique, where charged analytes (such as drug substances) are extracted from an aqueous sample (such as a biological fluid), through a supported liquid membrane (SLM) comprising a water immiscible organic solvent, and into an aqueous acceptor solution. The driving force for the extraction is an electrical potential (dc) applied across the SLM. In this paper, EME is reviewed. First, the principle for EME is explained with focus on extraction of cationic and anionic analytes, and typical performance data are presented. Second, papers published in 2016 are reviewed and discussed with focus on (a) new SLMs, (b) new support materials for the SLM, (c) new sample additives improving extraction, (d) new technical configurations, (e) improved theoretical understanding, and (f) pharmaceutical new applications. Finally, important future research objectives and directions are defined for further development of EME, with the aim of establishing EME in the toolbox of future analytical laboratories.