Predicting the Metal Mixture Toxicity with a Toxicokinetic-Toxicodynamic Model Considering the Time-Dependent Adverse Outcome Pathways

Chemicals mainly exist in ecosystems as mixtures, and understanding and predicting their effects are major challenges in ecotoxicology. While the adverse outcome pathway (AOP) and toxicokinetic-toxicodynamic (TK-TD) models show promise as mechanistic approaches in chemical risk assessment, there is still a lack of methodology to incorporate the AOP into a TK-TD model. Here, we describe a novel approach that integrates the AOP and TK-TD models to predict mixture toxicity using metal mixtures (specifically Cd-Cu) as a case study. We preliminarily constructed an AOP of the metal mixture through temporal transcriptome analysis together with confirmatory bioassays. The AOP revealed that prolonged exposure time activated more key events and adverse outcomes, indicating different modes of action over time. We selected a potential key event as a proxy for damage and used it as a measurable parameter to replace the theoretical parameter (scaled damage) in the TK-TD model. This refined model, which connects molecular responses to organism outcomes, effectively predicts Cd-Cu mixture toxicity over time and can be extended to other metal mixtures and even multicomponent mixtures. Overall, our results contribute to a better understanding of metal mixture toxicity and provide insights for integrating the AOP and TK-TD models to improve risk assessment for chemical mixtures.

A novel mixture sampling strategy combining latin hypercube sampling with optimized one factor at a time method: A case study on mixtures of antibiotics and pesticides

Global sensitivity analysis in conjunction with quantitative high-throughput screening presents a novel technique for identifying the key components that induce the toxicities of mixtures. However, the mixtures currently designed with this method suffer from unequal frequency sampling, repeated mixtures, and only odd factor levels being considered. Accordingly, we use latin hypercube sampling to generate the starting points of the trajectories to achieve equal frequency sampling and non-repeated mixtures, as well as apply different one factor at a time methods for factors with odd and even levels to achieve suitability for factors with both odd and even levels. This method is called LHS-OAT. LHS-OAT was successfully applied to design 110 equal-frequency and non-repeated mixtures consisting of six antibiotics and four pesticides. It was found that four factors, roxithromycin (A5), tetracycline (A6), dichlorvos (P1), and demeton-S (P3), induce the toxicities of mixtures, and A5 and P1 in the Shaying River Basin have risk quotients ≥ 1. Additionally, we developed the toxicity deviation ratio to correct the risk quotients of interacting mixtures for effective risk assessments. This study provides a rational and effective method for mixture design that accurately identifies the important factors that induce the toxicities of mixtures.

A novel equal frequency sampling of factor levels (EFSFL) method is applied to identify the dominant factor inducing the combined toxicities of 13 factors

The research framework combining global sensitivity analysis (GSA) with quantitative high-throughput screening (qHTS), called GSA-qHTS, provides a potentially feasible way to screen for important factors that induce toxicities of complex mixtures. Despite its value, the mixture samples designed using the GSA-qHTS technique still have a shortage of unequal factor levels, which leads to an asymmetry in the importance of elementary effects (EEs). In this study, we developed a novel method for mixture design that enables equal frequency sampling of factor levels (called EFSFL) by optimizing both the trajectory number and the design and expansion of the starting points for the trajectory. The EFSFL has been successfully employed to design 168 mixtures of 13 factors (12 chemicals and time) that each have three levels. By means of high-throughput microplate toxicity analysis, the toxicity change rules of the mixtures are revealed. Based on EE analysis, the important factors affecting the toxicities of the mixtures are screened. It was found that erythromycin is the dominant factor and time is an important non-chemical factor in mixture toxicities. The mixtures can be classified into types A, B, and C mixtures according to their toxicities at 12 h, and all the types B and C mixtures contain erythromycin at the maximum concentration. The toxicities of the type B mixtures increase firstly over time (0.25 ∼ 9 h) and then decrease (12 h), while those of the type C mixtures consistently increase over time. Some type A mixtures produce stimulation that increases with time. With the present new approach to mixture design, the frequency of factor levels in mixture samples is equal. Consequently, the accuracy of screening important factors is improved based on the EE method, providing a new method for the study of mixture toxicity.

Introduction of Flavor Chemical Eugenol Attenuating the Synergistic Toxicological Interactions of Flavor Mixtures

The flavor chemicals benzyl alcohol (BEA), phenylethanol (PHA), and cinnamaldehyde (CID) and their binary mixtures have high toxicity sensitivity to the lethal endpoint of Caenorhabditis elegans. Some binary flavor mixtures even have synergistic toxicological interactions. Eugenol (EUG) is closely related to human life and has many special nonlethal effects on organisms. The effect of its introduction on the combined toxicities of flavor mixtures is worth studying. We introduced EUG into three binary (BEA-PHA, BEA-CID, and PHA-CID) and one ternary (BEA-PHA-CID) flavor mixture systems. Five representative mixture rays were selected from each of the four mixture systems using the uniform design ray (UD-Ray) method. The lethal toxicity of each mixture ray to C. elegans was measured at three different exposure volumes (100, 200, and 400 μL), and a dose-effect model was established. The new parameter iSPAN was used to quantitatively characterize the toxicity sensitivity of each chemical and mixture ray. The toxicological interaction of each mixture was evaluated by the toxicological interaction heatmap based on the combination index (CI). It can be seen that all flavor chemicals and their ternary and quaternary mixture rays have high iSPANs, and the highest value is 16.160 (BEA-PHA-CID-EUG-R1 at 400 μL). According to the heatmap and CI, the introduction of EUG attenuates the synergistic toxicological interactions of flavor mixtures, leading to the transformation ofsynergistic interactions in flavor mixtures into additive action and even antagonistic interaction, and the CI value of the antagonistic interaction is up to 1.8494 (BEA-CID-EUG-R4 at 400 μL).

Joint action of binary mixtures based on parameter k·ECx from concentration-response curves in long-term toxicity assay

A previous acute toxicity study of binary mixtures showed that the combined toxicity can be predicted with the parameter k∙EC_x. To systematically investigate the ability of k∙EC_x to predict the chronic combined toxicity of binary mixtures, the toxicity of six contaminants and five binary mixtures was determined by long-term microplate toxicity analysis (L-MTA) using Aliivibrio fischeri as the test organism. The independent action model (IA) and the relative model deviation ratio (rMDR) were employed to determine the relationship between the Δ(k∙EC_x)% and rMDR_x. The results showed that these two factors conformed to the exponential function in long-term toxicity. Owing to the time-dependence of toxicity, the mixture type of chronic toxicity changes to the relative type of acute toxicity. If the acute toxicity of binary mixtures changes their mode of joint action throughout the concentration range, the chronic toxicity will also change their mode of joint action, and vice versa. This study clarified the change rules of the joint action of binary mixtures in acute and chronic toxicity which can promote research on chronic toxicity of binary mixtures.

Prediction on the combined toxicities of stimulation-only and inhibition-only contaminants using improved inverse distance weighted interpolation

The evaluation of ecological risks of contaminant mixtures to organisms is very challenging due to the non-linear response of organisms to each component, especially under the co-existence of both stimulators and inhibitors. Whether the stimulatory effect can reduce or even offset the inhibitory effect would be critical to the risk assessment and the treatment measures of mixed pollutants. Here, the combined toxicity of sodium fluoride (NaF), a stimulator with stimulation rate >100%, and six compounds that cannot induce hormesis (four ionic liquids (ILs) and two pesticides) were studied. The time-dependent toxicity of each toxicant on Vibrio qinghaiensis sp.-Q67 was investigated at 0.25, 2, 4, 6, 8, 10 and 12 h. Results showed that four ILs and two pesticides failed to induce hormesis, while NaF induced hormesis from 2 to 6 h and induced stimulation only after 6 h and reached its maximum (650%) at 12 h. All mixture rays with NaF induced hormesis at different times. In the four NaF-IL mixture systems, the absolute value of maximum stimulation demonstrated an upwards and then a downwards trend with the increasing of mixture ratio of IL. In two NaF-pesticide systems, the maximum stimulation effect declined with the increasing of the mixture ratio of pesticide. The toxicities of the mixture were successfully predicted by the improved inverse distance weighted interpolation, which are not able to be predicted by the commonly used concentration addition or independent action models. This paper shed lights on evaluating the hormesis of mixtures and the ecological risk of fluoride.

Study on the Combined Toxicities and Quantitative Characterization of Toxicity Sensitivities of Three Flavor Chemicals and Their Mixtures to Caenorhabditis elegans

It was shown that flavor chemicals with high toxicity sensitivities mean that small changes in their effective concentrations can lead to significant changes in toxicity. Flavors are widely used in personal care products. However, our study demonstrated that some flavor chemicals and their mixture rays have high toxicity sensitivities to Caenorhabditis elegans (C. elegans), which may have an impact on human health. In this paper, three flavor chemicals (benzyl alcohol, phenethyl alcohol, and cinnamaldehyde) were used as components of the mixture, and three binary mixture systems were constructed, respectively. Five mixture rays were designed for each mixture system by a direct equipartition ray design method. The lethal toxicities of the three flavor chemicals and mixture rays to C. elegans at three exposure volumes were determined. A new concept (inverse of the negative logarithmic concentration span (iSPAN)) was introduced to quantitatively evaluate the toxicity sensitivity of chemicals or mixture rays, and the combination index (CI) was employed to identify the toxicological interactions in the mixtures. It was shown that the three flavor chemicals as well as the binary mixture rays have a significant concentration-response relationship on the lethality of C. elegans. The iSPAN values of the three flavor chemicals and their mixture rays were larger than 3.000, showing very strong toxicity sensitivity to C. elegans. In mixture systems, the toxicity sensitivities of mixture rays with different mixture ratios were also different at different exposure volumes. In addition, it can be seen from the CI heat map that the toxicological interaction not only shows the mixture ratio dependence but also changes with the different exposure volumes, which implies that the mixtures consisting of flavor chemicals with high toxicity sensitivity have complex toxicological interactions. Therefore, in environmental risk assessment, special attention should be paid to chemicals with high toxicity sensitivities.

Review of the toxic effects of ionic liquids

Interest in ionic liquids (ILs), called green or designer solvents, has been increasing because of their excellent properties such as thermal stability and low vapor pressure; thus, they can replace harmful organic chemicals and help several industrial fields e.g., energy-storage materials production and biomaterial pretreatment. However, the claim that ILs are green solvents should be carefully considered from an environmental perspective. ILs, given their minimal vapor pressure, may not directly cause atmospheric pollution. However, they have the potential to cause adverse effects if leaked into the environment, for instance if they are spilled due to human mistakes or technical errors. To estimate the risks of ILs, numerous ILs have had their toxicity assessed toward several micro- and macro-organisms over the past few decades. Since the toxic effects of ILs depend on the method of estimating toxicity, it is necessary to briefly summarize and comprehensively discuss the biological effects of ILs according to their structure and toxicity testing levels. This can help simplify our understanding of the toxicity of ILs. Therefore, in this review, we discuss the key findings of toxicological information of ILs, collect some toxicity data of ILs to different species, and explain the influence of IL structure on their toxic properties. In the discussion, we estimated two different sensitivity values of toxicity testing levels depending on the experiment condition, which are theoretical magnitudes of the inherent sensitivity of toxicity testing levels in various conditions and their changes in biological response according to the change in IL structure. Finally, some perspectives, future research directions, and limitations to toxicological research of ILs, presented so far, are discussed.

Ultrasound-enhanced coagulation for Microcystis aeruginosa removal and disinfection by-product control during subsequent chlorination

Ultrasound techniques have gained increased interest in environmental remediation because of their promising performance and reagent-free nature. This study investigated the effects of ultrasound-coagulation on Microcystis aeruginosa removal, disinfection by-product (DBP) formation during subsequent chlorination, and acute toxicity and DBP-associated toxicity variations in chlorinated effluents. Compared with coagulation using polymeric aluminum chloride (5 mg-Al/L) alone, ultrasound-coagulation showed significantly enhanced turbidity removal, with the removal ratio increasing from 51% to 87%-96%. Although the addition of ultrasound may not substantially improve and even deteriorate the coagulation removal of DOC following the leakage of intracellular organic matter, the significantly improved DBP control was achieved as the cells dominated DBP formation. With the addition of ultrasound, the chlorine demand, aggregate DBP concentration and total organic halogen concentration reductions in the chlorinated M. aeruginosa solution increased from 15%, 47% and 52% (coagulation alone), respectively, to 56%-78%, 56%-80% and 68%-89%. The enhanced DBP mitigation was mainly attributed to the enhanced algal removal. Similarly, the acute toxicity and DBP-associated toxicity of chlorinated effluents further decreased from 100% and 0.0092 (coagulation alone) to 30%-88% and 0.0029-0.0060. Therefore, ultrasound-enhanced coagulation is a promising strategy for urgent algal removal, DBP mitigation and toxicity abatement.

Ultrasound-enhanced coagulation for cyanobacterial removal: Effects of ultrasound frequency and energy density on coagulation performance, leakage of intracellular organic matters and toxicity

Ultrasound-enhanced coagulation is capable of effectively removing algal cells in algae-laden water. However, study differences in ultrasound settings, algal cell conditions and coagulant properties complicate the accurate evaluation of this technique for practical applications. No study has yet compared algae (and algal organic matters) removal among different frequencies of ultrasound in the ultrasound-coagulation process. In this study, the ultrasound at three typical frequencies, 29.4, 470 and 780 kHz, were applied for this purpose. The results showed that high-frequency ultrasound at 470 and 780 kHz had substantially greater improvement of coagulation than low-frequency ultrasound at 29.4 kHz (For example, the turbidity removal at 1 mg-Al/L of polymeric aluminum chloride increased by 204.2%, 571.9% and 563.2% under 29.4, 470 and 780 kHz ultrasound-coagulation, respectively, at 3.42 J/mL). Algal cells exhibited irreversible physical damage and the release of intracellular organic matters (such as odorous compounds) under low-frequency ultrasound with energy densities ≥ 3.42 J/mL, whereas high-frequency ultrasound was characterized by nonviolent impairment, including oxidative degradation and gas vacuole destruction (particularly reversible) resulting from ultrasound-induced radicals and cell resonance, respectively. Avoiding the severe destruction of algal cells is crucial for minimizing the toxicity and secondary pollution of the treated water. To achieve satisfactory removal, protected safety and better economy, the optimal energy density for each frequency was also determined. The findings from the analyses of the laboratory-cultured sample were confirmed via real eutrophic surface water. This study provides new insights and guidance for the ongoing study of harmful algal removal by ultrasound-enhanced coagulation.

Protein Model and Function Analysis in Quorum-Sensing Pathway of Vibrio qinghaiensis sp.-Q67

Bioluminescent bacteria are mainly found in marine habitats. Vibrio qinghaiensis sp.-Q67 (Q67), a nonpathogenic freshwater bacterium, has been a focus due to its wide use in the monitoring of environmental pollution and the assessment of toxicity. However, the lack of available crystal structures limits the elucidation of the structures of the functional proteins of the quorum-sensing (QS) system that regulates bacterial luminescence in Q67. In this study, 19 functional proteins were built through monomer and oligomer modeling based on their coding proteins in the QS system of Q67 using MODELLER. Except for the failure to construct LuxM due to the lack of a suitable template, 18 functional proteins were successfully constructed. Furthermore, the relationships between the function and predicted structures of 19 functional proteins were explored one by one according to the three functional classifications: autoinducer synthases and receptors, signal transmission proteins (phosphotransferases, an RNA chaperone, and a transcriptional regulator), and enzymes involved in bacterial bioluminescence reactions. This is the first analysis of the whole process of bioluminescence regulation from the perspective of nonpathogenic freshwater bacteria at the molecular level. It provides a theoretical basis for the explanation of applications of Q67 in which luminescent inhibition is used as the endpoint.

Quantitative evaluation and the toxicity mechanism of synergism within three organophosphorus pesticide mixtures to Chlorella pyrenoidosa

Organophosphorus pesticide (OPP) pollutants in the environment pose toxicity risks to living organisms, and the possible toxicity mechanism needs to be further clarified. Therefore, the individual and combined toxicity of three OPPs namely acephate (ACE), trichlorfon (TRI) and glyphosate (GIY) towards a freshwater green alga Chlorella pyrenoidosa (C. pyrenoidosa) was investigated by the time-dependent microplate toxicity analysis method. Here, a ternary mixture system of the three OPPs including five rays with different concentration ratios was designed by the uniform design ray method. The standard additive reference model, concentration addition (CA), was used to analyse toxicity interaction within ternary mixtures and the toxicity interaction intensity was characterized using a deviation from CA model (dCA). Besides, the effects of the three OPPs and their mixtures on the chlorophyll (CHL) content, superoxide dismutase (SOD) activity and malondialdehyde (MDA) content of C. pyrenoidosa were also investigated to explore the possible mechanisms. The results show that toxicity of the three pesticides and their ternary mixture rays is time-dependent and the combined toxicity correlates well with the components, ACE and GLY. It is likely that there is a significant time-dependent synergism in ternary mixtures induced by ACE and GLY. The synergism intensity of the ternary mixtures is not more than 30% at the whole experimental concentration level. The CHL reduction rate and MDA content of C. pyrenoidosa increase, while the SOD activity of C. pyrenoidosa decreases with the lengthening of exposure time under the action of the three pesticides and their ternary mixtures. So, the possible mechanism of the three pesticides and their mixtures may be by affecting the photosynthesis, and then causing oxidative damage to C. pyrenoidosa cells. The results can provide reference for the combined toxicity assessment of OPPs to living organisms.

Significant effects of two pesticides on the bacteriostatic activity and antioxidant ability of green tea polyphenols

Green tea polyphenols (GTPs) are widely used in food preservation because of their strong bacteriostatic activity and antioxidant ability, and whether pesticides as common pollutants in food will affect the function of GTPs is worthy of attention.

Time-dependent synergism of five-component mixture systems of aminoglycoside antibiotics toVibrio qinghaiensissp.-Q67 induced by a key component

A large number of antibiotics are entering the aquatic environment accompanying human and animal excreta, which will threaten the survival of aquatic organisms and even human health. It has been found that binary mixtures of aminoglycoside (AG) exhibit additive action and can be evaluated well by a classical model, concentration addition (CA) in our past study. Therefore, to investigate the toxicity interaction within multi-component mixtures of AG antibiotics, five antibiotics, kanamycin sulfate (KAN), neomycin sulfate (NEO), tobramycin (TOB), streptomycin sulfate (STS), and gentamicin sulfate (GEN), were selected to construct five-component mixture systems by a uniform design ray method. The toxic effects (luminescence inhibition) of single antibiotic and five-antibiotic mixture systems towards a photobacterium Vibrio qinghaiensis sp.-Q67 (V. qinghaiensis) in different exposure time (0.25, 2, 4, 8, and 12 h) were determined by the time-dependent microplate toxicity analysis method. The concentration-effect data were fitted by a nonlinear least square method, toxicity interaction within mixture systems was analyzed by a CA model, and the interaction intensity was characterized by deviation from the CA model (dCA). Besides, the toxicity mechanism of five antibiotics and their five-component mixtures to V. qinghaiensis was analyzed by electron microscopy. The results show that toxicity of five antibiotics and their five-component mixture systems to V. qinghaiensis is time-dependent and has strong long-term toxicity. Different from binary AG antibiotic mixture systems, five-antibiotic mixture systems exhibit obviously time-dependent synergism. In addition, toxicity of the five-antibiotic mixtures can be 1.4 times higher than that of the mixtures without synergisms at the same concentration level. According to dCA, synergism intensity (dCA) curves of rays move slowly from the high concentration region to the medium or lower one and the maximum dCA values also increase, decrease, or first increase, then decrease with the lengthening of exposure time. The inhibition activity and synergism intensity of mixture rays have good correlation with the concentration ratios of STS, the key component for synergism. The cell morphology of V. qinghaiensis indicates the strong toxicity of five antibiotics and their mixture rays is not due to the destruction of cell structure, but the inhibition of the light-emitting activity of the photobacterium.

There was time-dependent synergism in the five-component mixture systems of five antibiotics, which induced by STS.

Polyethylene glycol 400 significantly enhances the stimulation of 2-phenoxyethanol on Vibrio qinghaiensis sp.-Q67 bioluminescence

Previous studies demonstrated long-term stimulation of some commercial personal care products (PCPs) on freshwater luminescent bacteria Vibrio qinghaiensis sp.-Q67 (Q67). However, whether a certain component can affect mixture's hormetic effect is still unknown. In this paper, two of ingredients in PCPs, 2-phenoxyethanol (PhE) and polyethylene glycol 400 (PEG400), were selected as object compounds to explore the relationship between concentration-response (CR) of mixtures and that of a single component. It was found that PEG400 has monotonic CR (MCR) on Q67 both at the short-term (0.25 h) and long-term (12 h) exposures while PhE has MCR at 0.25 h and hormetic CR (HCR) at 12 h. Here, the concentration-response curves (CRCs) of PEG400 at 0.25 and 12 h are overlapped each other and the CRCs of PEG400 are on the right of PhE. If the pEC₅₀ is taken as a toxic index, the toxicities of PEG400 at two times are basically the same, and those of PhE are the same, too, but PhE is twice as toxic as PEG400. For the mixtures of PEG400 and PhE, all rays except R1 have MCRs at 0.25 h while all rays have HCRs at 12 h where the higher the mixture ratio of PhE is, the more negative the maximum stimulation effect is. More importantly, the E_min values of all rays are more negative (1.79-3.17-fold) than that of PhE worked alone, which implies that the introduction of PEG400 significantly enhances stimulative effect of PhE. At 0.25 h, all binary mixture rays but R1 produce a low-concentration additive action and high-concentration synergism. At 12 h, all rays display additive action, antagonism, additive action, and synergism in turn when the concentration changes from low to high. The overall findings suggested toxicological interactions should be considered in the risk assessment of PCPs and their potential impacts on ecological balances.

Assessing the influence of the genetically modified factor on mixture toxicological interactions in Caenorhabditis elegans: Comparison between wild type and a SOD type

How to evaluate the ecological risk of transgenic technology is a focus of scientists because of the safety concerns raised by genetically modified (GM) organisms. Nevertheless, most studies are based on individual chemicals and always analyze the GM organism as a type of toxicant. In this study, we changed the approach and used GM organisms as the test objects with normal chemical exposure. Three types of chemicals (two substituted phenols, 4-chlorophenol and 4-nitrophenol; two ionic liquids, 1-butylpyridinium chloride and 1-butylpyridinium bromide; two pesticides, dichlorvos and glyphosate) were used to construct a six-component mixture system. The lethality to wild-type (N2) and sod-3::GFP (SOD-3) Caenorhabditis elegans was determined when they were exposed to the same mixture system after 12 and 24 h. The results showed that the pEC50 values of all of the single chemicals on SOD-3 were greater than those on N2 at 24 h. The toxicities of the single chemicals and nine mixture rays on the two strains increased with time. Notably, we discovered a significant difference between the two strains; time-dependent synergism occurred in mixtures on N2, but time-dependent antagonism occurred in mixtures on SOD-3. Finally, the strength of the synergism or antagonism turned to additive action on the two strains as the exposure time increased. These findings illustrated that the GM factor of the nematode influenced the mixture toxicological interaction at some exposure times. Compared with N2, SOD-3 were more sensitive to stress or toxic reactions. Therefore, the influence of the GM factor on mixture toxicological interactions in environmental risk assessment must be considered.

Commercial personal care product mixtures exhibit hormetic concentration-responses to Vibrio qinghaiensis sp.-Q67

The biological effects related to personal care products (PCPs) are almost induced by some active ingredients in the PCPs rather than the PCP itself. In this study, 23 common and widely used toner, skin water, and make-up water (TSM) commodities were directly taken as mixture samples, and Vibrio qinghaiensis sp.-Q67 (Q67) was used as the test organism. The toxicities of the TSMs to Q67 were determined via microplate toxicity analysis at 0.25 h and 12 h. Each TSM commodity can be regarded as a complicated mixture (relative concentration is 1). It was shown that the concentration-response curves (CRCs) of 23 TSMs are monotonic sigmoid-shaped (S-shaped) at 0.25 h, the CRCs of six TSMs are also S-shaped but the other 17 TSMs are non-monotonic hormetic or J-shaped at 12 h. In addition, to effectively characterize the nature of the stimulation and inhibition phases, it is suggested that five parameters such as the EC_L (the median stimulation effective concentration (left)), E_min (the maximum stimulation effect), EC_min (the maximum stimulation effective concentration), ZEP (zero effect point where the effect is 0 and the concentration is ZEP), and EC₅₀ can depict the non-monotonic CRC. To the best of our knowledge, this is the first study about the hormetic CRCs of commercial PCP mixtures.

Toxicological interaction of multi-component mixtures to Vibrio qinghaiensis sp.-Q67 induced by at least three components

It has been stated by researchers that the antibiotic polymyxin B sulfate (POL) is a key component inducing time-dependent antagonism in freshwater luminescent bacteria, Vibrio qinghaiensis sp.-Q67, exposed in the ternary mixture system of the ionic liquids, pesticide and antibiotics. However, the previous statement is limited to ternary and quaternary mixtures without considering situations such as the binary system. In order to prove the direct inducing of antagonism by POL in a more complete and systematic way, two categories of experiments (adding POL in non-antagonistic ternary system and decomposing antagonistic ternary system with POL into the binary system) have been conducted in this paper. The results showed that quaternary mixture systems (adding POL to non-antagonism ternary mixture, up verification) exhibit antagonistic action in a majority of rays, at some point in the experiment. However, by decomposing the antagonistic ternary mixtures with POL into binary mixtures (down verification), the combined toxicities of binary mixtures at all time points in the experiment are additive. Obviously, the POL has a significant contribution to antagonism only in the ternary and quaternary mixtures, but not in the binary mixtures. We can draw a new conclusion that the antagonism of the multi-component mixtures is induced by at least three components (including POL), with complex chemical interactions. Therefore, considering POL's influence of antagonism as an example, future environmental protection practitioners and academic researchers should construct more scenarios of mixtures when assessing the influences and reactions of certain chemicals causing pollutions.

Time-dependent and Pb-dependent antagonism and synergism towards Vibrio qinghaiensis sp.-Q67 within heavy metal mixtures

Toxicity interaction has aroused many researchers' interest in the combined toxicity of pollutants. Recently, some published studies have shown that the toxicity of some mixture pollutants is time dependent and well correlated with certain components in the mixture. Therefore, to investigate whether toxicity interaction is affected by the exposure time or certain components, synergism and antagonism within typical environmental contaminants of heavy metal mixtures were analyzed in different exposure times. Herein, three binary and one ternary mixture systems were designed by using three heavy metals: cadmium chloride, lead chloride (Pb) and manganese(ii) chloride tetrahydrate (Mn). For each mixture system, five mixture rays with different concentration ratios were arranged by direct equipartition ray design and uniform design ray methods. The toxicities of the three heavy metals and 20 mixture rays towards photobacteria Vibrio qinghaiensis sp.-Q67 (Q67) were determined by the established time-dependent microplate toxicity analysis (t-MTA) in different exposure durations of 0.25, 2, 4, 8 and 12 h. It was shown that the toxicities of three heavy metals (Cd, Pb and Mn) as well as their binary and ternary mixture rays to Q67 were also time dependent, but different metals or mixture rays showed different time characteristics. Surprisingly, some mixture rays exhibited antagonism or synergism with time dependency and the time characteristics varied in different mixture systems. Furthermore, the binary or ternary mixture systems with Pb displayed antagonism, while the Cd–Mn mixture system without Pb exhibited additive action or synergism, which indicated that Pb was probably the causative agent of antagonism produced by mixtures.

Toxicity interaction has gained much interest in the research of toxicity of mixture pollutants.

The effect of soil on human health: an overview

Soil has a considerable effect on human health, whether those effects are positive or negative, direct or indirect. Soil is an important source of nutrients in our food supply and medicines such as antibiotics. However, nutrient imbalances and the presence of human pathogens in the soil biological community can cause negative effects on health. There are also many locations where various elements or chemical compounds are found in soil at toxic levels, because of either natural conditions or anthropogenic activities. The soil of urban environments has received increased attention in the last few years, and they too pose a number of human health questions and challenges. Concepts such as soil security may provide a framework within which issues on soil and human health can be investigated using interdisciplinary and transdisciplinary approaches. It will take the contributions of experts in several different scientific, medical and social science fields to address fully soil and human health issues. Although much progress was made in understanding links between soil and human health over the last century, there is still much that we do not know about the complex interactions between them. Therefore, there is still a considerable need for research in this important area.

Hormesis of some organic solvents on Vibrio qinghaiensis sp.-Q67 from first binding to the β subunit of luciferase

Hormesis is a biphasic concentration–response relationship. During the luminescence inhibition test ofVibrio qinghaiensissp.-Q67 (Q67), some organic solvents display the hormesis phenomenon.