Atmospheric chemistry of bioaerosols: heterogeneous and multiphase reactions with atmospheric oxidants and other trace gases

Atmospheric Intermediates at the Air-Water Interface

The air-water interface (AWI) is a ubiquitous reaction field different from the bulk phase where unexpected reactions and physical processes often occur. The AWI is a region where air contacts cloud droplets, aerosol particles, the ocean surface, and biological surfaces such as fluids that line human epithelia. In Earth's atmosphere, short-lived intermediates are expected to be generated at the AWI during multiphase reactions. Recent experimental developments have enabled the direct detection of atmospherically relevant, short-lived intermediates at the AWI. For example, spray ionization mass spectrometric analysis of water microjets exposed to a gaseous mixture of ozone and water vapor combined with a 266 nm laser flash photolysis system (LFP-SIMS) has been used to directly probe organic peroxyl radicals (RO2·) produced by interfacial hydroxyl radicals (OH·) + organic compound reactions. OH· emitted immediately after the laser flash photolysis of carboxylic acid at the gas-liquid interface have been directly detected by time-resolved, laser-induced florescence techniques that can be used to study atmospheric multiphase photoreactions. In this Featured Article, we show some recent experimental advances in the detection of atmospherically important intermediates at the AWI and the associated reaction mechanisms. We also discuss current challenges and future prospects for atmospheric multiphase chemistry.

Multiphase reactions of proteins in the air: Oligomerization, nitration and degradation of bovine serum albumin upon ambient exposure

Proteins in atmospheric aerosol can react with atmospheric pollutants such as ozone (O3) and nitrogen dioxide (NO2) in the atmosphere via the reactions of oxidation, nitration, and cross-linking etc. Currently, the reactions have been more thoroughly studied in the laboratory but rarely investigated in the ambient environment. In this study, we used bovine serum albumin (BSA) as the model protein to conduct the exposure experiment in the ambient environment in southern China, an area with increasing oxidative capacity, to investigate the reactions of proteins in the atmosphere. We observed the occurrence of oligomerization, nitration and degradation of BSA upon exposure. The mass fraction of BSA monomer decreased by 5.86 ± 1.61% after exposure and those of dimers, trimers and higher oligomers increased by 1.04 ± 0.49%, 1.37 ± 0.74% and 3.40 ± 1.06%, respectively. Simultaneously, the nitration degrees of monomers, dimers, trimers and higher oligomers increased by 0.42 ± 0.15%, 0.53 ± 0.15%, 0.55 ± 0.28% and 2.15 ± 1.01%, respectively. The results show that oligomerization was significantly affected by O3 and temperature and nitration was jointly affected by O3, temperature and relative humidity, indicating the important role of atmospheric oxidants in the atmospheric reactions of protein. Atmospheric degradation of BSA was observed with the release of free amino acids (FAAs) such as glycine, alanine, serine and methionine. Glycine was the dominant FAA with a molar yield ranging from ∼8% to 33% for BSA. The estimated stoichiometric coefficient (α) of glycine is 10-7-10-6 for the degradation of BSA upon O3. Our observation suggests the occurrence of protein reactions in the oxidative ambient environment, leading to the production of nitrated products, oligomers and low molecular weight products such as peptides and FAAs. This study may deepen the current understanding of the atmospheric reaction mechanisms and reveal the influence of environmental factors in the atmosphere.

Alteration of the health effects of bioaerosols by chemical modification in the atmosphere: A review

Bioaerosols are a subset of important airborne particulates that present a substantial human health hazard due to their allergenicity and infectivity. Chemical reactions in atmospheric processes can significantly influence the health hazard presented by bioaerosols; however, few studies have summarized such alterations to bioaerosols and the mechanisms involved. In this paper, we systematically review the chemical modifications of bioaerosols and the impact on their health effects, mainly focusing on the exacerbation of allergic diseases such as asthma, rhinitis, and bronchitis. Oxidation, nitration, and oligomerization induced by hydroxyl radicals, ozone, and nitrogen dioxide are the major chemical modifications affecting bioaerosols, all of which can aggravate allergenicity mainly through immunoglobulin E pathways. Such processes can even interact with climate change including the greenhouse effect, suggesting the importance of bioaerosols in the future implementation of carbon neutralization strategies. In summary, the chemical modification of bioaerosols and the subsequent impact on health hazards indicate that the combined management of both chemical and biological components is required to mitigate the health hazards of particulate air pollution.

The composition of the bacterial communities collected from the PM10 samples inside the Seoul subway and railway station

Health implications of indoor air quality (IAQ) have drawn more attention since the COVID epidemic. There are many different kinds of studies done on how IAQ affects people's well-being. There hasn't been much research that looks at the microbiological composition of the aerosol in subway transit systems. In this work, for the first time, we examined the aerosol bacterial abundance, diversity, and composition in the microbiome of the Seoul subway and train stations using DNA isolated from the PM10 samples from each station (three subway and two KTX stations). The average PM10 mass concentration collected on the respective platform was 41.862 µg/m3, with the highest average value of 45.95 µg/m3 and the lowest of 39.25 µg/m3. The bacterial microbiomes mainly constituted bacterial species of soil and environmental origin (e.g., Acinetobacter, Brevundimonas, Lysinibacillus, Clostridiodes) with fewer from human sources (Flaviflexus, Staphylococcus). This study highlights the relationship between microbiome diversity and PM10 mass concentration contributed by outdoor air and commuters in South Korea's subway and train stations. This study gives insights into the microbiome diversity, the source, and the susceptibility of public transports in disease spreading.

Bioaerosols in the atmosphere: A comprehensive review on detection methods, concentration and influencing factors

In the past few decades, especially since the outbreak of the coronavirus disease (COVID-19), the effects of atmospheric bioaerosols on human health, the environment, and climate have received great attention. To evaluate the impacts of bioaerosols quantitatively, it is crucial to determine the types of bioaerosols in the atmosphere and their spatial-temporal distribution. We provide a concise summary of the online and offline observation strategies employed by the global research community to sample and analyze atmospheric bioaerosols. In addition, the quantitative distribution of bioaerosols is described by considering the atmospheric bioaerosols concentrations at various time scales (daily and seasonal changes, for example), under various weather, and different underlying surfaces. Finally, a comprehensive summary of the reasons for the spatiotemporal distribution of bioaerosols is discussed, including differences in emission sources, the impact process of meteorological factors and environmental factors. This review of information on the latest research progress contributes to the emergence of further observation strategies that determine the quantitative dynamics of public health and ecological effects of bioaerosols.

Aeromicrobiology: A global review of the cycling and relationships of bioaerosols with the atmosphere

Airborne microorganisms and biological matter (bioaerosols) play a key role in global biogeochemical cycling, human and crop health trends, and climate patterns. Their presence in the atmosphere is controlled by three main stages: emission, transport, and deposition. Aerial survival rates of bioaerosols are increased through adaptations such as ultra-violet radiation and desiccation resistance or association with particulate matter. Current research into modern concerns such as climate change, global gene transfer, and pathogenicity often neglects to consider atmospheric involvement. This comprehensive review outlines the transpiring of bioaerosols across taxa in the atmosphere, with significant focus on their interactions with environmental elements including abiotic factors (e.g., atmospheric composition, water cycle, and pollution) and events (e.g., dust storms, hurricanes, and wildfires). The aim of this review is to increase understanding and shed light on needed research regarding the interplay between global atmospheric phenomena and the aeromicrobiome. The abundantly documented bacteria and fungi are discussed in context of their cycling and human health impacts. Gaps in knowledge regarding airborne viral community, the challenges and importance of studying their composition, concentrations and survival in the air are addressed, along with understudied plant pathogenic oomycetes, and archaea cycling. Key methodologies in sampling, collection, and processing are described to provide an up-to-date picture of ameliorations in the field. We propose optimization to microbiological methods, commonly used in soil and water analysis, that adjust them to the context of aerobiology, along with other directions towards novel and necessary advancements. This review offers new perspectives into aeromicrobiology and calls for advancements in global-scale bioremediation, insights into ecology, climate change impacts, and pathogenicity transmittance.

Comprehensive insights into advances in ambient bioaerosols sampling, analysis and factors influencing bioaerosols composition

While the study of bioaerosols has a long history, it has garnered heightened interest in the past few years, focusing on both culture-dependent and independent sampling and analysis approaches. Observations have been made regarding the seasonal fluctuations in microbial communities and their connection to particular ambient atmospheric factors. The study of airborne microbial communities is important in public health and atmospheric processes. Nevertheless, the establishment of standardized protocols for evaluating airborne microbial communities and utilizing microbial taxonomy as a means to identify distinct bioaerosols sources and seasonal patterns remains relatively unexplored. This article discusses the challenges and limitations of ambient bioaerosols sampling and analysis, including the lack of standardized methods and the heterogeneity of sources. Future prospects in the field of bioaerosols, including the use of high-throughput sequencing technologies, omics studies, spectroscopy and fluorescence-based monitoring to provide comprehensive incite on metabolic capacity, and activity are also presented. Furthermore, the review highlights the factors that affect bioaerosols composition, including seasonality, atmospheric conditions, and pollution levels. Overall, this review provides a valuable resource for researchers, policymakers, and stakeholders interested in understanding and managing bioaerosols in various environments.

Emerging investigator series: aqueous photooxidation of live bacteria with hydroxyl radicals under cloud-like conditions: insights into the production and transformation of biological and organic matter originating from bioaerosols

Live bacteria in clouds are exposed to free radicals such as the hydroxyl radical (˙OH), which is the main driver of many photochemical processes. While the ˙OH photooxidation of organic matter in clouds has been widely studied, equivalent investigations on the ˙OH photooxidation of bioaerosols are limited. Little is known about the daytime encounters between ˙OH and live bacteria in clouds. Here we investigated the aqueous ˙OH photooxidation of four bacterial strains, B. subtilis, P. putida, E. hormaechei B0910, and E. hormaechei pf0910, in microcosms composed of artificial cloud water that mimicked the chemical composition of cloud water in Hong Kong. The survival rates for the four bacterial strains decreased to zero within 6 hours during exposure to 1 × 10-16 M of ˙OH under artificial sunlight. Bacterial cell damage and lysis released biological and organic compounds, which were subsequently oxidized by ˙OH. The molecular weights of some of these biological and organic compounds were >50 kDa. The O/C, H/C, and N/C ratios increased at the initial onset of photooxidation. As the photooxidation progressed, there were few changes in the H/C and N/C, whereas the O/C continued to increase for hours after all the bacterial cells had died. The increase in the O/C was due to functionalization and fragmentation reactions, which increased the O content and decreased the C content, respectively. In particular, fragmentation reactions played key roles in transforming biological and organic compounds. Fragmentation reactions cleaved the C-C bonds of carbon backbones of higher molecular weight proteinaceous-like matter to form a variety of lower molecular weight compounds, including HULIS of molecular weight <3 kDa and highly oxygenated organic compounds of molecular weight <1.2 kDa. Overall, our results provided new insights at the process level into how daytime reactive interactions between live bacteria and ˙OH in clouds contribute to the formation and transformation of organic matter.

Uptake of ozone by allergenic pollen grains

Ozone exacerbates allergy symptoms to certain pollens. The molecular mechanisms by which ozone affects pollen grains (PGs) and allergies are not fully understood, especially as the effects of pollutants may vary depending on the type of pollen. In this work, pollens of 22 different taxa were exposed under laboratory conditions to ozone (100 ppb) to quantify the ozone uptake by the PGs. The ozone uptake was highly variable among the 22 taxa tested. The highest ozone uptake per PG was measured on Acer negundo PGs (2.5 ± 0.2 pg. PG^-1). On average, tree pollens captured significantly more ozone than herbaceous pollens (average values of 0.5 and 0.02 pg. PG^-1, respectively). No single parameter (such as the number of apertures, time of the year for the pollen season, pollen size, or lipid fraction) could predict a pollen's ability to take up ozone. Lipids seem to act as a barrier to ozone uptake and play a protective role for some taxa. After inhalation of PGs, pollen-transported ozone could be transferred to mucous membranes and exacerbate symptoms through oxidative stress and local inflammation. Although the amount of ozone transported is small in absolute terms, it is significant compared to the antioxidant capacity of nasal mucus at a microscale. This mechanism of pollen-induced oxidative stress could explain the aggravation of allergic symptoms during ozone pollution episodes.

Toxicological Effects of Secondary Air Pollutants

Secondary air pollutants, originating from gaseous pollutants and primary particulate matter emitted by natural sources and human activities, undergo complex atmospheric chemical reactions and multiphase processes. Secondary gaseous pollutants represented by ozone and secondary particulate matter, including sulfates, nitrates, ammonium salts, and secondary organic aerosols, are formed in the atmosphere, affecting air quality and human health. This paper summarizes the formation pathways and mechanisms of important atmospheric secondary pollutants. Meanwhile, different secondary pollutants' toxicological effects and corresponding health risks are evaluated. Studies have shown that secondary pollutants are generally more toxic than primary ones. However, due to their diverse source and complex generation mechanism, the study of the toxicological effects of secondary pollutants is still in its early stages. Therefore, this paper first introduces the formation mechanism of secondary gaseous pollutants and focuses mainly on ozone's toxicological effects. In terms of particulate matter, secondary inorganic and organic particulate matters are summarized separately, then the contribution and toxicological effects of secondary components formed from primary carbonaceous aerosols are discussed. Finally, secondary pollutants generated in the indoor environment are briefly introduced. Overall, a comprehensive review of secondary air pollutants may shed light on the future toxicological and health effects research of secondary air pollutants.

Fast Hydroxyl Radical Generation at the Air-Water Interface of Aerosols Mediated by Water-Soluble PM2.5 under Ultraviolet A Radiation

Due to the adverse health effects and the role in the formation of secondary organic aerosols, hydroxyl radical (OH) generation by atmospheric fine particulate matter (PM) has been of particular research interest in both bulk solutions and the gas phase. However, OH generation by PM at the air-water interface of atmospheric water droplets, a unique environment where reactions can be accelerated by orders of magnitude, has long been overlooked. Using the field-induced droplet ionization mass spectrometry methodology that selectively samples molecules at the air-water interface, here, we show significant oxidation of amphiphilic lipids and isoprene mediated by water-soluble PM_2.5 at the air-water interface under ultraviolet A irradiation, with the OH generation rate estimated to be 1.5 × 10¹⁶ molecule·s^-1·m^-2. Atomistic molecular dynamics simulations support the counter-intuitive affinity for the air-water interface of isoprene. We opine that it is the carboxylic chelators of the surface-active molecules in PM that enrich photocatalytic metals such as iron at the air-water interface and greatly enhance the OH generation therein. This work provides a potential new heterogeneous OH generation channel in the atmosphere.

Desert dust intrusions and their incidence on airborne biological content. Review and case study in the Iberian Peninsula

Desert dust intrusions cause the transport of airborne particulate matter from natural sources, with important consequences for climate regulation, biodiversity, ecosystem functioning and dynamics, human health, and socio-economic activities. Some effects of desert intrusions are reinforced or aggravated by the bioaerosol content of the air during these episodes. The influence of desert intrusions on airborne bioaerosol content has been very little studied from a scientific point of view. In this study, a systematic review of scientific literature during 1970-2021 was carried out following the standard protocol Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA). After this literature review, only 6% of the articles on airborne transport from desert areas published in the last 50 years are in some way associated with airborne pollen, and of these, only a small proportion focus on the study of pollen-related parameters. The Iberian Peninsula is affected by Saharan intrusions due to its proximity to the African continent and is seeing an increasing trend the number of intrusion events. There is a close relationship among the conditions favouring the occurrence of intrusion episodes, the transport of particulate matter, and the transport of bioaerosols such as pollen grains, spores, or bacteria. The lack of linearity in this relationship and the different seasonal patterns in the occurrence of intrusion events and the pollen season of most plants hinders the study of the correspondence between both phenomena. It is therefore important to analyse the proportion of pollen that comes from regional sources and the proportion that travels over long distances, and the atmospheric conditions that cause greater pollen emission during dust episodes. Current advances in aerobiological techniques make it possible to identify bioaerosols such as pollen and spores that serve as indicators of long-distance transport from remote areas belonging to other bioclimatic and biogeographical units. A greater incidence of desert intrusion episodes may pose a challenge for both traditional systems and for the calibration and correct validation of automatic aerobiological monitoring methods.

Optimized Spectrophotometry Method for Starch Quantification

Starch is a polysaccharide that is abundantly found in nature and is generally used as an energy source and energy storage in many biological and environmental processes. Naturally, starch tends to be in miniscule amounts, creating a necessity for quantitative analysis of starch in low-concentration samples. Existing studies that are based on the spectrophotometric detection of starch using the colorful amylose–iodine complex lack a detailed description of the analytical procedure and important parameters. In the present study, this spectrophotometry method was optimized, tested, and applied to studying starch content of atmospheric bioaerosols such as pollen, fungi, bacteria, and algae, whose chemical composition is not well known. Different experimental parameters, including pH, iodine solution concentrations, and starch solution stability, were tested, and method detection limit (MDL) and limit of quantification (LOQ) were determined at 590 nm. It was found that the highest spectrophotometry signal for the same starch concentration occurs at pH 6.0, with an iodine reagent concentration of 0.2%. The MDL was determined to be 0.22 μg/mL, with an LOQ of 0.79 μg/mL. This optimized method was successfully tested on bioaerosols and can be used to determine starch content in low-concentration samples. Starch content in bioaerosols ranged from 0.45 ± 0.05 (in bacteria) to 4.3 ± 0.06 μg/mg (in fungi).

A Collection of Molecular Fingerprints of Single Aerosol Particles in Air for Potential Identification and Detection Using Optical Trapping-Raman Spectroscopy

Characterization, identification, and detection of aerosol particles in their native atmospheric states remain a challenge. Recently, optical trapping-Raman spectroscopy (OT-RS) has been developed and demonstrated for characterization of single, airborne particles. Such particles in different chemical groups have been characterized by OT-RS in recent years and many more are being studied. In this work, we collected single-particle Raman spectra measured using the OT-RS technique and began construction of a library of OT-RS fingerprints that may be used as a reference for potential detection and identification of aerosol particles in the atmosphere. We collected OT-RS fingerprints of aerosol particles from eight different categories including carbons, bioaerosols (pollens, fungi, vitamins, spores), dusts, biological warfare agent surrogates, etc. Among the eight categories, spectral fingerprints of six groups of aerosol particles have been published previously and two other groups are new. We also discussed challenges, limitations, and advantages of using single-particle optical trapping-Raman spectroscopy for aerosol-particle characterization, identification, and detection.

The Sea Spray Chemistry and Particle Evolution study (SeaSCAPE): overview and experimental methods

Marine aerosols strongly influence climate through their interactions with solar radiation and clouds. However, significant questions remain regarding the influences of biological activity and seawater chemistry on the flux, chemical composition, and climate-relevant properties of marine aerosols and gases. Wave channels, a traditional tool of physical oceanography, have been adapted for large-scale ocean-atmosphere mesocosm experiments in the laboratory. These experiments enable the study of aerosols under controlled conditions which isolate the marine system from atmospheric anthropogenic and terrestrial influences. Here, we present an overview of the 2019 Sea Spray Chemistry and Particle Evolution (SeaSCAPE) study, which was conducted in an 11 800 L wave channel which was modified to facilitate atmospheric measurements. The SeaSCAPE campaign sought to determine the influence of biological activity in seawater on the production of primary sea spray aerosols, volatile organic compounds (VOCs), and secondary marine aerosols. Notably, the SeaSCAPE experiment also focused on understanding how photooxidative aging processes transform the composition of marine aerosols. In addition to a broad range of aerosol, gas, and seawater measurements, we present key results which highlight the experimental capabilities during the campaign, including the phytoplankton bloom dynamics, VOC production, and the effects of photochemical aging on aerosol production, morphology, and chemical composition. Additionally, we discuss the modifications made to the wave channel to improve aerosol production and reduce background contamination, as well as subsequent characterization experiments. The SeaSCAPE experiment provides unique insight into the connections between marine biology, atmospheric chemistry, and climate-relevant aerosol properties, and demonstrates how an ocean-atmosphere-interaction facility can be used to isolate and study reactions in the marine atmosphere in the laboratory under more controlled conditions.

Investigation of Sources, Diversity, and Variability of Bacterial Aerosols in Athens, Greece: A Pilot Study

We characterized the composition, diversity, and potential bacterial aerosol sources in Athens’ urban air by DNA barcoding (analysis of 16S rRNA genes) during three seasons in 2019. Air samples were collected using the recently developed Rutgers Electrostatic Passive Sampler (REPS). It is the first field application of REPS to study bacterial aerosol diversity. REPS samplers captured a sufficient amount of biological material to demonstrate the diversity of airborne bacteria and their variability over time. Overall, in the air of Athens, we detected 793 operational taxonomic units (OTUs), which were fully classified into the six distinct taxonomic categories (Phylum, Class, Order, etc.). These OTUs belonged to Phyla Actinobacteria, Firmicutes, Proteobacteria, Bacteroidetes, Cyanobacteria, and Fusobacteria. We found a complex community of bacterial aerosols with several opportunistic or potential pathogens in Athens’ urban air. Referring to the available literature, we discuss the likely sources of observed airborne bacteria, including soil, plants, animals, and humans. Our results on bacterial diversity are comparable to earlier studies, even though the sampling sites are different or geographically distant. However, the exact functional and ecological role of bioaerosols and, even more importantly, their impact on public health and the ecosystem requires further air monitoring and analysis.

Relative abundance of saccharides, free amino acids, and other compounds in specific pollen species for source profiling of atmospheric aerosol

Though studies in bioaerosols are being conducted with increasing frequency over the past decade, the total breadth of knowledge on bioaerosols and their role in atmospheric processes is still minimal. In order to better characterize the chemical composition of fresh biological aerosol for purposes of source apportionment and tracing in the atmosphere, several plant pollen species were selected for detailed chemical analyses. For this purpose, different pollen species were purchased and collected around Reno, Nevada, USA, for further extraction and detailed chemical analysis. These species included aspen, corn, pecan, ragweed, eastern cottonwood, paper mulberry, rabbitbrush, bitterbrush, lodgepole pine, and Jeffrey pine. Saccharides, free amino acids, and various other polar compounds (e.g., anhydrosugars and resin acids) were quantitatively analyzed using gas chromatography and ultra-high performance liquid chromatography coupled with mass spectrometry techniques (GC-MS and UPLC-MS), with the purpose to identify differences and nuances in chemical composition of specific pollen species. The saccharides β-d-fructose, α-d-glucose, and β-d-glucose were ubiquitously found across all pollen samples (10), and sucrose was found in five samples. d-galactose was also found in pine species. Total saccharides were 4.0 to 29% of total dry weight across all samples. Total free amino acids were 0.29% to 15% of total dry weight across all samples, with the most common amino acid being proline. Chemical profiles (including both saccharides and amino acids) of surface-deposited aerosol in the Lake Tahoe area correlated most closely with pine pollen than other analyzed pollen species, indicating that chemical profiles of pollen can be used to infer its contribution to local aerosols.

Enzyme-Catalyzed Hydrolysis of Lipids in Immiscible Microdroplets Studied by Contained-Electrospray Ionization

Enzyme-catalyzed hydrolysis of lipids was monitored directly in immiscible microdroplet environments using contained-electrospray mass spectrometry. Aqueous solution of the lipase enzyme from Pseudomonas cepacia and the chloroform solution of the lipids were sprayed from separate capillaries, and the resultant droplets were merged within a reaction cavity that is included at the outlet of the contained-electrospray ionization source. By varying the length of the reaction cavity, the interaction time between the enzyme and its substrate was altered, enabling the quantification of reaction product as a function of time. Consequently, enhancement factors were estimated by comparing rate constants derived from the droplet experiment to rate constants calculated from solution-phase conditions. These experiments showed enhancement factors greater than 100 in favor of the droplet experiment. By using various lipid types, two possible mechanisms were identified to account for lipase reactivity in aerosols: in-droplet reactions for relatively highly soluble lipids and a droplet coalescence mechanism that allows interfacial reactions for the two immiscible systems.

Reaction Acceleration Promoted by Partial Solvation at the Gas/Solution Interface

The kinetics of organic reactions of different types in microvolumes (droplets, thin films, and sealed tubes) show effects of gas/solution interfacial area, reaction molecularity and solvent polarity. Partial solvation at the gas/solution interface is a major contributor to the 10⁴ -fold reaction acceleration seen in bimolecular but not unimolecular reactions in microdroplets. Reaction acceleration can be used to manipulate selectivity by solvent choice.

Cation-Driven Lipopolysaccharide Morphological Changes Impact Heterogeneous Reactions of Nitric Acid with Sea Spray Aerosol Particles

Lipopolysaccharides (LPS) in sea spray aerosol (SSA) particles have recently been shown to undergo heterogeneous reactions with HNO₃ in the atmosphere. Here, we integrate theory and experiment to further investigate how the most abundant sea salt cations, Na⁺, Mg²⁺, and Ca²⁺, impact HNO₃ reactions with LPS-containing SSA particles. Aerosol reaction flow tube studies show that heterogeneous reactions of SSA particles with divalent cation (Mg²⁺ and Ca²⁺) and LPS signatures were less reactive with HNO₃ than those dominated by monovalent cations (Na⁺). All-atom molecular dynamics simulations of model LPS aggregates suggest that divalent cations cross-link the oligosaccharide chains to increase molecular aggregation and rigidity, which changes the particle phase and morphology, decreases water diffusion, and consequently decreases the reactive uptake of HNO₃. This study provides new insight into how complex chemical interactions between ocean-derived salts and biogenic organic species can impact the heterogeneous reactivity of SSA particles.

Nitrate Photolysis in Mixed Sucrose-Nitrate-Sulfate Particles at Different Relative Humidities

Atmospheric particles can be viscous. The limitation in diffusion impedes the mass transfer of oxidants from the gas phase to the particle phase and hinders multiphase oxidation processes. On the other hand, nitrate photolysis has been found to be effective in producing oxidants such as OH radicals within the particles. Whether nitrate photolysis can effectively proceed in viscous particles and how it may affect the physicochemical properties of the particle have not been much explored. In this study, we investigated particulate nitrate photolysis in mixed sucrose-nitrate-sulfate particles as surrogates of atmospheric viscous particles containing organic and inorganic components as a function of relative humidity (RH) and the molar fraction of sucrose to the total solute (F_SU) with an in situ micro-Raman system. Sucrose suppressed nitrate crystallization, and high photolysis rate constants (∼10^-5 s^-1) were found, irrespective of the RH. For F_SU = 0.5 and 0.33 particles under irradiation at 30% RH, we observed morphological changes from droplets to the formation of inclusions and then likely "hollow" semisolid particles, which did not show Raman signal at central locations. Together with the phase states of inorganics indicated by the full width at half-maxima (FWHM), images with bulged surfaces, and size increase of the particles in optical microscopic imaging, we inferred that the hindered diffusion of gaseous products (i.e., NO_x, NO_y) from nitrate photolysis is a likely reason for the morphological changes. Atmospheric implications of these results are also presented.

Atomic Force Microscopy: An Emerging Tool in Measuring the Phase State and Surface Tension of Individual Aerosol Particles

Atmospheric aerosols are suspended particulate matter of varying composition, size, and mixing state. Challenges remain in understanding the impact of aerosols on the climate, atmosphere, and human health. The effect of aerosols depends on their physicochemical properties, such as their hygroscopicity, phase state, and surface tension. These properties are dynamic with respect to the highly variable relative humidity and temperature of the atmosphere. Thus, experimental approaches that permit the measurement of these dynamic properties are required. Such measurements also need to be performed on individual, submicrometer-, and supermicrometer-sized aerosol particles, as individual atmospheric particles from the same source can exhibit great variability in their form and function. In this context, this review focuses on the recent emergence of atomic force microscopy as an experimental tool in physical, analytical, and atmospheric chemistry that enables such measurements. Remaining challenges are noted and suggestions for future studies are offered.

Optical-Trapping Laser Techniques for Characterizing Airborne Aerosol Particles and Its Application in Chemical Aerosol Study

We present a broad assessment on the studies of optically-trapped single airborne aerosol particles, particularly chemical aerosol particles, using laser technologies. To date, extensive works have been conducted on ensembles of aerosols as well as on their analogous bulk samples, and a decent general description of airborne particles has been drawn and accepted. However, substantial discrepancies between observed and expected aerosols behavior have been reported. To fill this gap, single-particle investigation has proved to be a unique intersection leading to a clear representation of microproperties and size-dependent comportment affecting the overall aerosol behavior, under various environmental conditions. In order to achieve this objective, optical-trapping technologies allow holding and manipulating a single aerosol particle, while offering significant advantages such as contactless handling, free from sample collection and preparation, prevention of contamination, versatility to any type of aerosol, and flexibility to accommodation of various analytical systems. We review spectroscopic methods that are based on the light-particle interaction, including elastic light scattering, light absorption (cavity ring-down and photoacoustic spectroscopies), inelastic light scattering and emission (Raman, laser-induced breakdown, and laser-induced fluorescence spectroscopies), and digital holography. Laser technologies offer several benefits such as high speed, high selectivity, high accuracy, and the ability to perform in real-time, in situ. This review, in particular, discusses each method, highlights the advantages and limitations, early breakthroughs, and recent progresses that have contributed to a better understanding of single particles and particle ensembles in general.

Steady-state operation of a biofilter coupled with photocatalytic control of bacterial bioaerosol emissions

Bioaerosols are emitted during the biological treatment of water, soil, and air pollutants. The elimination of these pollutants has become a priority due to their detrimental effects on human health. Advanced oxidation technologies have been used to control bioaerosol emissions specially to improve indoor air quality. This investigation was focused on evaluating the biofiltration of ethyl acetate vapors in terms of removal efficiency and bioaerosol emission. Also, a continuous photocatalytic process to inactivate bioaerosols emitted from the biofilter was assessed as a post-treatment. The photocatalysis was developed with ZnO and TiO₂ immobilized onto Poraver glass beads. Flow cytometry (FC) coupled with fluorochromes was used to characterize and quantify bioaerosol emissions in terms of live, dead, and injured cells. Ethyl acetate removal efficiencies were maintained in a steady state with values of 100% under 60-g m^-3 h^-1 inlet load (IL). Biomass concentration in the biofilter reached values up to 228 mg_biomass g_perlite^-1 at day 56 of operation, but the spontaneous occurrence of predatory mites diminished biomass concentration by 33%. Bioaerosols emitted during the steady-state operation of the biofilter were composed mainly by bacteria (~ 94%) and in a less extent of fungal spores (0.29-6%). The most efficient photocatalytic system comprised TiO₂/Poraver with 78% inactivation of bioaerosols during the first 2 h of the process, whereas the ZnO/Poraver system showed null activity (~ 0%) of inactivation. FC results show that the main mechanism of inactivation of TiO₂/Poraver was cell death.

The source and transport of bioaerosols in the air: A review

Recent pandemic outbreak of the corona-virus disease 2019 (COVID-19) has raised widespread concerns about the importance of the bioaerosols. They are atmospheric aerosol particles of biological origins, mainly including bacteria, fungi, viruses, pollen, and cell debris. Bioaerosols can exert a substantial impact on ecosystems, climate change, air quality, and public health. Here, we review several relevant topics on bioaerosols, including sampling and detection techniques, characterization, effects on health and air quality, and control methods. However, very few studies have focused on the source apportionment and transport of bioaerosols. The knowledge of the sources and transport pathways of bioaerosols is essential for a comprehensive understanding of the role microorganisms play in the atmosphere and control the spread of epidemic diseases associated with them. Therefore, this review comprehensively summarizes the up to date progress on the source characteristics, source identification, and diffusion and transport process of bioaerosols. We intercompare three types of diffusion and transport models, with a special emphasis on a widely used mathematical model. This review also highlights the main factors affecting the source emission and transport process, such as biogeographic regions, land-use types, and environmental factors. Finally, this review outlines future perspectives on bioaerosols.

Airborne bacteria structure and chemical composition relationships in winter and spring PM10 samples over southeastern Italy

The Redundancy Discrimination Analysis (RDA) and Spearman correlation coefficients were used to investigate relationships between airborne bacteria at the phylum and genus level and chemical species in winter and spring PM10 samples over Southeastern Italy. The identification of main chemical species/pollution sources that were related to and likely affected the bacterial community structure was the main goal of this work. The 16S rRNA gene metabarcoding approach was used to characterize airborne bacteria. Seventeen phyla and seventy-nine genera contributing each by mean within-sample relative abundance percentage > 0.01% were identified in PM10 samples, which were chemically characterized for 33 species, including ions, metals, OC, and EC (organic and elemental carbon, respectively). Chemical species were associated with six different pollution sources. A shift from winter to spring in both bacterial community structure and chemical species mass concentrations/sources and the relationships between them was observed. RDA triplots pointed out significant correlations for all tested bacterial phyla (genera) with other phyla (genera) and/or with chemical species, in contrast to correlation coefficient results, which showed that few phyla (genera) were significantly correlated with chemical species. More specifically, in winter Bacillus and Chryseobacterium were the only genera significantly correlated with chemical species likely associated with particles from soil-dust and anthropogenic pollution source, respectively. In spring, Enterobacter and Sphingomonas were the only genera significantly correlated with chemical species likely associated with particles from the anthropogenic pollution and the marine and soil-dust sources, respectively. The results of this study also showed that the correlation coefficients were the best tool to obtain unequivocal identifications of the correlations of phyla (genera) with chemical species. The seasonal changes of the PM10 chemical composition, the microbial community structure, and their relationships suggested that the seasonal changes of atmospheric particles may have likely contributed to seasonal changes of bacterial community in the atmosphere.

Bioaerosols at plants processing materials of plant origin-a review

Due to the dynamic development of industry, related to the processing of plant materials and a subsequent significant increase in the number of employees working in this kind of industry, the indoor air quality is of great importance for the human health. The premises of plants processing plant materials are a specific environment, related to exposure to biological agents. The major sources of microbial contamination of premises are employees' activities and the operation of devices used in the production process, quality of plant materials, technological processes, construction materials, ventilation (air-conditioning) systems, and outdoor air. Biological agents (primarily bacteria and fungi) transported in the air can cause numerous adverse health outcomes in exposed workers.

Links between airborne microbiome, meteorology, and chemical composition in northwestern Turkey

The composition of atmospheric aerosols is dynamic and influenced by their emission sources, organic and inorganic composition, transport pathways, chemical and physical processes, microorganisms' content and more. Characterization of such factors can improve the ability to evaluate air quality and health risks under different atmospheric scenarios. Here we investigate the microbial composition of the atmospheric particulate matter (<10 μm; PM₁₀), sampled in Bolu, Turkey, and the linkage to the chemical composition changes, and different environmental factors. We show distinct differences between aerosol composition of different sources and air-mass transport patterns, sampled in July-August 2017 and in February 2018. The summer samples had a typical northern component air mass trajectories and higher local wind speed. They were characterized by high PM₁₀ levels, marine and mineral dust tracers and high relative abundance of Ascomycota, suggesting long-range transport of the particles from remote sources. In contrast, samples collected in February were characterized by a dominant contribution of southern air masses, and low wind speed. They had low PM₁₀ values, higher relative abundance of antibiotic resistance genes and anthropogenic ions related to local industries and farming, suggesting a dominance of local sources. With the microbiome analyses reported here for the first time for this region, we show good agreement between airborne microbial composition, aerosol mass load, chemistry, and meteorology. These results allow better air quality evaluation and prediction capabilities.

Temporal-spatial variations of fungal composition in PM2.5 and source tracking of airborne fungi in mountainous and urban regions

Fungi are ubiquitous in air and their composition is potentially important for human health. Exposure to fungal allergens has been considered as a significant risk factor due to the prevalence and severity of asthma in humans. However, temporal-spatial variations and potential sources of airborne fungi aerosol have been poorly understood. In this study, 48 PM_2.5 samples were collected at two sampling sites in Xi'an from April 2018 to January 2019. High-throughput sequencing technology was used to determine the diversity and abundance of fungal composition in all samples. Microbial samples were also collected from leaf-surface and soil to identify the potential sources of fungal aerosols. Results showed that the species richness of fungi in summer and autumn inclined to be higher than that in spring and winter in mountainous and urban regions. Airborne fungal species richness and diversity at Mt. Qinling sampling site were significantly higher compared to Yanta urban sampling site, except in winter. These variations in fungal composition were significantly related to season and location. The influence of atmospheric pollutants (PM_2.5, ozone, sulfur dioxide and carbon monoxide) on the richness and diversity of airborne fungal composition was higher than meteorological factors (temperature, relative humidity and wind speed). Moreover, it was observed that the leaf-surface was the primary local source of airborne fungi during all seasons at both sampling sites. Back trajectories arriving at both sampling sites showed that a considerable part of airborne fungi might have come from other regions by medium or long-range airflow. This study will provide an important reference for studying the source and temporal-spatial variations of fungal aerosols and further provide basic background data for human health exposure assessment.

Assessing the airborne survival of bacteria in populations of aerosol droplets with a novel technology

The airborne transmission of infection relies on the ability of pathogens to survive aerosol transport as they transit between hosts. Understanding the parameters that determine the survival of airborne microorganisms is critical to mitigating the impact of disease outbreaks. Conventional techniques for investigating bioaerosol longevity in vitro have systemic limitations that prevent the accurate representation of conditions that these particles would experience in the natural environment. Here, we report a new approach that enables the robust study of bioaerosol survival as a function of relevant environmental conditions. The methodology uses droplet-on-demand technology for the generation of bioaerosol droplets (1 to greater than 100 per trial) with tailored chemical and biological composition. These arrays of droplets are captured in an electrodynamic trap and levitated within a controlled environmental chamber. Droplets are then deposited on a substrate after a desired levitation period (less than 5 s to greater than 24 h). The response of bacteria to aerosolization can subsequently be determined by counting colony forming units, 24 h after deposition. In a first study, droplets formed from a suspension of Escherichia coli MRE162 cells (10⁸ ml^-1) with initial radii of 27.8 ± 0.08 µm were created and levitated for extended periods of time at 30% relative humidity. The time-dependence of the survival rate was measured over a time period extending to 1 h. We demonstrate that this approach can enable direct studies at the interface between aerobiology, atmospheric chemistry and aerosol physics to identify the factors that may affect the survival of airborne pathogens with the aim of developing infection control strategies for public health and biodefence applications.

Variation of airborne DNA mass ratio and fungal diversity in fine particles with day-night difference during an entire winter haze evolution process of Central China

Airborne fungi are a primary component of bioaerosols and proved to impact human health and climatic change. Deoxyribonucleic acid (DNA) is the essential component of most living organisms with relatively stable physicochemical properties. Little is known about day-night and pollution-episode differences of DNA mass ratio and fungal community in fine particles (PM_2.5) during serious winter haze events in China. Here we collected twenty-nine PM_2.5 samples every day and night during an entire winter haze evolution process in a megacity of Central China, Wuhan. DNA extraction and high-throughput sequencing methods were adopted to analyze fungal community. Results showed that mass ratio of DNA in PM_2.5 (R_D/P %) changed with pollution process and showed significant negative correlations with PM_2.5 concentration (r = -0.72, P < 0.05) and temperature (r = -0.74, P < 0.05). R_D/P became lower (4.40 × 10^-4%) after haze episodes than before (7.16 × 10^-4%). R_D/P of night-samples (1.98 × 10^-4-4.97 × 10^-4%) were all lower than those for day-samples (3.05 × 10^-4-9.99 × 10^-4%) for the same period. The fungal species richness became much lower (76 operational taxonomic units (OTUs)) after haze episodes than before (198 OTUs). The species richness of night-samples (119-537 OTUs) were all higher than those of day-samples (71-198 OTUs) for the same period. The OTUs specially owned by night-samples were also more than those by day-samples. Fungal community diversity showed random variations. The fungal community composition of each sample was classified from phylum to genus level. Pathogenic fungi accounted for 8.60% of the entire fungal community. The significantly enriched fungal taxa in the night-sample group (29 taxa) were also much more than that in the day-sample group (9 taxa), which could explain the higher species richness of airborne fungi community in the night during the haze evolution episodes. These findings may serve as an important reference or inspiration to other aerosol studies focusing on human health and behavior of aerosols in the atmosphere.

Salting Up of Proteins at the Air/Water Interface

Vibrational sum frequency generation (VSFG) spectroscopy and surface pressure measurements are used to investigate the adsorption of a globular protein, bovine serum albumin (BSA), at the air/water interface with and without the presence of salts. We find at low (2 to 5 ppm) protein concentrations, which is relevant to environmental conditions, both VSFG and surface pressure measurements of BSA behave drastically different from at higher concentrations. Instead of emerging to the surface immediately, as observed at 1000 ppm, protein adsorption kinetics is on the order of tens of minutes at lower concentrations. Most importantly, salts strongly enhance the presence of BSA at the interface. This "salting up" effect differs from the well-known "salting out" effect as it occurs at protein concentrations well-below where "salting out" occurs. The dependence on salt concentration suggests this effect relates to a large extent electrostatic interactions and volume exclusion. Additionally, results from other proteins and the pH dependence of the kinetics indicate that salting up depends on the flexibility of proteins. This initial report demonstrates "salting up" as a new type of salt-driven interfacial phenomenon, which is worthy of continued investigation given the importance of salts in biological and environmental aqueous systems.

Aerosol Microbiome over the Mediterranean Sea Diversity and Abundance

Prokaryotic microbes can become aerosolized and deposited into new environments located thousands of kilometers away from their place of origin. The Mediterranean Sea is an oligotrophic to ultra-oligotrophic marginal sea, which neighbors northern Africa (a major source of natural aerosols) and Europe (a source of mostly anthropogenic aerosols). Previous studies demonstrated that airborne bacteria deposited during dust events over the Mediterranean Sea may significantly alter the ecology and function of the surface seawater layer, yet little is known about their abundance and diversity during ‘background’ non-storm conditions. Here, we describe the abundance and genetic diversity of airborne bacteria in 16 air samples collected over an East-West transect of the entire Mediterranean Sea during non-storm conditions in April 2011. The results show that airborne bacteria represent diverse groups with the most abundant bacteria from the Firmicutes (Bacilli and Clostridia) and Proteobacteria (Alphaproteobacteria, Betaproteobacteria, and Gammaproteobacteria) phyla. Most of the bacteria in our samples have previously been observed in the air at other open ocean locations, in the air over the Mediterranean Sea during dust storms, and in the Mediterranean seawater. Airborne bacterial abundance ranged from 0.7 × 104 to 2.5 × 104 cells m−3 air, similar to abundances at other oceanic regimes. Our results demonstrate that airborne bacterial diversity is positively correlated with the mineral dust content in the aerosols and was spatially separated between major basins of the Mediterranean Sea. To our knowledge, this is the first comprehensive biogeographical dataset to assess the diversity and abundance of airborne microbes over the Mediterranean Sea. Our results shed light on the spatiotemporal distribution of airborne microbes and may have implications for dispersal and distribution of microbes (biogeography) in the ocean.

Surfactant Charge Modulates Structure and Stability of Lipase-Embedded Monolayers at Marine-Relevant Aerosol Surfaces

Lipases, as well as other enzymes, are present and active within the sea surface microlayer (SSML). Upon bubble bursting, lipases partition into sea spray aerosol (SSA) along with surface-active molecules such as lipids. Lipases are likely to be embedded in the lipid monolayer at the SSA surface and thus have the potential to influence SSA interfacial structure and chemistry. Elucidating the structure of the lipid monolayer at SSA interfaces and how this structure is altered upon interaction with a protein system like lipase is of interest, given the importance of how aerosols interact with sunlight, influence cloud formation, and provide surfaces for chemical reactions. Herein, we report an integrated experimental and computational study of Burkholderia cepacia lipase (BCL) embedded in a lipid monolayer and highlight the important role of electrostatic, rather than hydrophobic, interactions as a driver for monolayer stability. Specifically, we combine Langmuir film experiments and molecular dynamics (MD) simulations to examine the detailed interactions between the zwitterionic dipalmitoylphosphatidylcholine (DPPC) monolayer and BCL. Upon insertion of BCL from the underlying subphase into the lipid monolayer, it is shown that BCL permeates and largely disorders the monolayer while strongly interacting with zwitterionic DPPC molecules, as experimentally observed by Langmuir adsorption curves and infrared reflectance absorbance spectroscopy. Explicitly solvated, all-atom MD is then used to provide insights into inter- and intramolecular interactions that drive these observations, with specific attention to the formation of salt bridges or ionic-bonding interactions. We show that after insertion into the DPPC monolayer, lipase is maintained at high surface pressures and in large BCL concentrations by forming a salt-bridge-stabilized lipase-DPPC complex. In comparison, when embedded in an anionic monolayer at low surface pressures, BCL preferentially forms intramolecular salt bridges, reducing its total favorable interactions with the surfactant and partitioning out of the monolayer shortly after injection. Overall, this study shows that the structure and dynamics of lipase-embedded SSA surfaces vary based on surface charge and pressure and that these variations have the potential to differentially modulate the properties of marine aerosols.

Characteristics of airborne opportunistic pathogenic bacteria during autumn and winter in Xi'an, China

Bacteria are ubiquitous throughout the earth's lower atmosphere. Bacteria, especially pathogenic bacteria, play an important role in human health. The diversity, composition, and dynamics of airborne bacteria has been widely studied; however, the characteristics of pathogenic bacteria remain poorly understood. In this study, a high throughput sequencing method was used to explore the airborne opportunistic pathogenic bacteria during autumn and winter in Xi'an, China. An aggregated boosted tree (ABT) was developed to determine the relative influence of environmental factors on the proportions of opportunistic pathogenic bacteria. Results showed that significantly more opportunistic pathogenic bacteria were found in winter than in autumn, and more opportunistic pathogenic bacteria were found in fine particulate matters (<2.5 μm) than in PM₁₀ (<10 μm). However, the composition of opportunistic pathogenic bacteria varied in autumn and winter. PM was the main factor affecting the proportions of opportunistic pathogenic bacteria, and air contaminants (PM, sulfur dioxide, nitrogen oxide, carbon monoxide, and ozone) influenced the proportion of opportunistic pathogenic bacteria more than meteorological factors (relative humidity, temperature, and wind speed). Different factors may be responsible for the variances in opportunistic pathogenic bacterial communities in different seasons. This study may provide a reference to support the control of pathogenic bacteria in urban environments during haze events.

Air Quality and Potential Health Risk Impacts of Exposure to Bacterial Aerosol in a Waste Sorting Plant Located in the Mountain Region of Southern Poland, Around Which There Are Numerous Rural Areas

Many studies have shown an association between working in waste sorting plants (SP) and occupational health problems, such as skin irritation or pulmonary diseases. These symptoms have been related to biological aerosol exposure. The main goal of this work was to assess the levels of concentration and the characteristics of bacterial aerosols in waste sorting plants, based on measurements taken in a plant located in the mountain region of Southern Poland, around which there are numerous rural areas. The average concentrations of culturable bacterial aerosol (CCBA) collected in the unloading hall of the waste sorting plant (UHSP) and the outdoor air of the sorting plant (OSP) were 2687 CFU/m3 and 1138 CFU/m3, respectively. Sampling was undertaken in the plant using an Andersen six-stage impactor (with aerodynamic cut-off diameters of 7.0, 4.7, 3.3, 2.1, 1.1, and 0.65 μm), during the spring of 2019. Size distributions were unimodal, with a peak in particle bacterial aerodynamic diameters at less than 3.3 µm, increasing the potentially adverse health effects of their inhalation. An analysis was conducted to determine the antibiotic resistance of isolated strains of bacteria. During the study, it was found that isolates belonging to the genus Bacillus were most frequently detected in the waste sorting plant. Isolates with the highest resistance to antibiotics belonged to the genus Neisseria. This test indicates that the use of personal protective equipment is necessary.

Bioaerosol biomonitoring: Sampling optimization for molecular microbial ecology

Bioaerosols (or biogenic aerosols) have largely been overlooked by molecular ecologists. However, this is rapidly changing as bioaerosols play key roles in public health, environmental chemistry and the dispersal ecology of microbes. Due to the low environmental concentrations of bioaerosols, collecting sufficient biomass for molecular methods is challenging. Currently, no standardized methods for bioaerosol collection for molecular ecology research exist. Each study requires a process of optimization, which greatly slows the advance of bioaerosol science. Here, we evaluated air filtration and liquid impingement for bioaerosol sampling across a range of environmental conditions. We also investigated the effect of sampling matrices, sample concentration strategies and sampling duration on DNA yield. Air filtration using polycarbonate filters gave the highest recovery, but due to the faster sampling rates possible with impingement, we recommend this method for fine -scale temporal/spatial ecological studies. To prevent bias for the recovery of Gram-positive bacteria, we found that the matrix for impingement should be phosphate-buffered saline. The optimal method for bioaerosol concentration from the liquid matrix was centrifugation. However, we also present a method using syringe filters for rapid in-field recovery of bioaerosols from impingement samples, without compromising microbial diversity for high -throughput sequencing approaches. Finally, we provide a resource that enables molecular ecologists to select the most appropriate sampling strategy for their specific research question.

Atmospheric protein chemistry influenced by anthropogenic air pollutants: nitration and oligomerization upon exposure to ozone and nitrogen dioxide

The allergenic potential of airborne proteins may be enhanced via post-translational modification induced by air pollutants like ozone (O₃) and nitrogen dioxide (NO₂). The molecular mechanisms and kinetics of the chemical modifications that enhance the allergenicity of proteins, however, are still not fully understood. Here, protein tyrosine nitration and oligomerization upon simultaneous exposure of O₃ and NO₂ were studied in coated-wall flow-tube and bulk solution experiments under varying atmospherically relevant conditions (5-200 ppb O₃, 5-200 ppb NO₂, 45-96% RH), using bovine serum albumin as a model protein. Generally, more tyrosine residues were found to react via the nitration pathway than via the oligomerization pathway. Depending on reaction conditions, oligomer mass fractions and nitration degrees were in the ranges of 2.5-25% and 0.5-7%, respectively. The experimental results were well reproduced by the kinetic multilayer model of aerosol surface and bulk chemistry (KM-SUB). The extent of nitration and oligomerization strongly depends on relative humidity (RH) due to moisture-induced phase transition of proteins, highlighting the importance of cloud processing conditions for accelerated protein chemistry. Dimeric and nitrated species were major products in the liquid phase, while protein oligomerization was observed to a greater extent for the solid and semi-solid phase states of proteins. Our results show that the rate of both processes was sensitive towards ambient ozone concentration, but rather insensitive towards different NO₂ levels. An increase of tropospheric ozone concentrations in the Anthropocene may thus promote pro-allergic protein modifications and contribute to the observed increase of allergies over the past decades.

Chemical signatures of surface microheterogeneity on liquid mixtures

Many chemical reactions in Nature, the laboratory, and chemical industry occur in solvent mixtures that bring together species of dissimilar solubilities. Solvent mixtures are visually homogeneous, but are not randomly mixed at the molecular scale. In the all-important binary water-hydrotrope mixtures, small-angle neutron and dynamic light scattering experiments reveal the existence of short-lived (<50 ps), short-ranged (∼1 nm) concentration fluctuations. The presence of hydrophobic solutes stabilizes and extends such fluctuations into persistent, mesoscopic (10-100 nm) inhomogeneities. While the existence of inhomogeneities is well established, their impacts on reactivity are not fully understood. Here, we search for chemical signatures of inhomogeneities on the surfaces of W:X mixtures (W = water; X = acetonitrile, tetrahydrofuran, or 1,4-dioxane) by studying the reactions of Criegee intermediates (CIs) generated in situ from O₃(g) addition to a hydrophobic olefin (OL) solute. Once formed, CIs isomerize to functionalized carboxylic acids (FC) or add water to produce α-hydroxy-hydroperoxides (HH), as detected by surface-specific, online pneumatic ionization mass spectrometry. Since only the formation of HH requires the presence of water, the dependence of the R = HH/FC ratio on water molar fraction x w expresses the accessibility of water to CIs on the surfaces of mixtures. The finding that R increases quasi-exponentially with x w in all solvent mixtures is consistent with CIs being preferentially produced (from their OL hydrophobic precursor) in X-rich, long-lived OL:X _m W _n interfacial clusters, rather than randomly dispersed on W:X surfaces. R vs x w dependences therefore reflect the average ⟨m, n⟩ composition of OL:X _m W _n interfacial clusters, as weighted by cluster reorganization dynamics. Water in large, rigid clusters could be less accessible to CIs than in smaller but more flexible clusters of lower water content. Since mesoscale inhomogeneities are intrinsic to most solvent mixtures, these phenomena should be quite general.

Collapse Mechanisms of Nascent and Aged Sea Spray Aerosol Proxy Films

Sea spray aerosol (SSA) is highly enriched in marine-derived organic compounds during seasons of high biological productivity, and saturated fatty acids comprise one of the most abundant classes of molecules. Fatty acids and other organic compounds form a film on SSA surfaces, and SSA particle surface-area-to-volume ratios are altered during aging in the marine boundary layer (MBL). To understand SSA surface organization and its role during dynamic atmospheric conditions, an SSA proxy fatty acid film and its individual components stearic acid (SA), palmitic acid (PA), and myristic acid (MA) are studied separately using surface pressure–area ( Π − A ) isotherms and Brewster angle microscopy (BAM). The films were spread on an aqueous NaCl subphase at pH 8.2, 5.6, and 2.0 to mimic nascent to aged SSA aqueous core composition in the MBL, respectively. We show that the individual fatty acid behavior differs from that of the SSA proxy film, and at nascent SSA pH the mixture yields a monolayer with intermediate rigidity that folds upon film compression to the collapse state. Acidification causes the SSA proxy film to become more rigid and form 3D nuclei. Our results reveal film morphology alterations, which are related to SSA reflectivity, throughout various stages of SSA aging and provide a better understanding of SSA impacts on climate.

Characteristics of ambient bioaerosols during haze episodes in China: A review

Frequent low visibility, haze pollution caused by heavy fine particulate matter (PM_2.5) loading, has been entailing significant environmental issues and health risks in China since 2013. A substantial fraction of bioaerosols was observed in PM (1.5-15%) during haze periods with intensive pollution. However, systematic and consistent results of the variations of bioaerosol characteristics during haze pollution are lacking. The role of bioaerosols in air quality and interaction with environment conditions are not yet well characterized. The present article provides an overview of the state of bioaerosol research during haze episodes based on numerous recent studies over the past decade, focusing on concentration, size distribution, community structure, and influence factors. Examples of insightful results highlighted the characteristics of bioaerosols at different air pollution levels and their pollution effects. We summarize the influences of meteorological and environmental factors on the distribution of bioaerosols. Further studies on bioaerosols, applying standardized sampling and identification criteria and investigating the influence of mechanisms of environmental or pollution factors on bioaerosols as well as the sources of bioaerosols are proposed.

Emerging investigator series: exploring the surface properties of aqueous aerosols coated with mixed surfactants

Mixed Langmuir monolayers of cholesterol with both saturated and unsaturated fatty acids, stearic acid (SA), and oleic acid (OA) spread at the air-seawater surface were studied. The phase behavior, molecular interaction, and conformational order of the monolayers were investigated by surface pressure-area (π-A) isotherms and infrared reflection-absorption spectroscopy (IRRAS) measurements. The thermodynamic parameters of the mixed films, including excess molecular area and excess Gibbs free energy were calculated by using the isotherm data. The interaction between SA (or OA) and cholesterol varied with the molar fraction of the fatty acids and surface pressure. OA/chol monolayers showed the characteristics of miscibility, but they acted as nonideal systems. Cholesterol has been observed to have a stabilizing effect on OA monolayers. The negative values of the excess Gibbs free energy in the entire composition range demonstrated that mixed OA/chol monolayers were thermodynamically stable. IRRAS spectra showed that mixing with cholesterol changes the ordering of fatty acid monolayers at the air-seawater surface. The findings provide general information regarding the structural changes in the monolayer induced by lateral packing. These results help in the understanding of the mixing behavior of fatty acids and cholesterol and provide insights into the fate of the mixed-monolayer-coated sea salt aerosol in the ocean environment.

The potential role of malonic acid in the atmospheric sulfuric acid - Ammonia clusters formation

Malonic acid (MOA), one of the major dicarboxylic acids (DCAs) in aerosols, has been identified experimentally and computationally to be a strong acid. However, its potential role in the atmospheric clusters formation is still ambiguous. Hence, the participant mechanism of MOA on the formation of atmospheric sulfuric acid (SA)- ammonia (A) clusters was investigated by combining computational methods with atmospheric cluster dynamics code (ACDC). The most stable molecular structures obtained at the M06-2X/6-311++G(3df,3pd) level of theory shows that the added MOA molecule in the SA-A-based clusters presents a promotion on the interactions between SA and A molecules. ACDC simulations indicate directly an obvious enhancement strength R_MOA on the clusters formation rates at 218 K and the concentration of MOA ([MOA]) larger than 10⁸ molecules cm^-3, up to five orders of magnitude. Meanwhile, enhancement strength of MOA is compared with that of glycolic acid, and as expected, MOA presents a superior enhancement strength. Both R_MOA and the compared enhancement strength (r_com) present a positive dependency on [MOA] and a negative dependency on [SA]. With the increase of [A], both R_MOA and r_com (except at [SA] = 10⁴ molecules cm^-3) first increase, reaching the maximum value and then decrease. Finally, a catalytic participant mechanism of MOA where MOA acts as a mediate bridge for the formation of pure SA-A-based clusters has been identified by tracing the main growth pathways of the system.

Multiphase Mechanism for the Production of Sulfuric Acid from SO2 by Criegee Intermediates Formed During the Heterogeneous Reaction of Ozone with Squalene

Here we report a new multiphase reaction mechanism by which Criegee intermediates (CIs), formed by ozone reactions at an alkene surface, convert SO₂ to SO₃ to produce sulfuric acid, a precursor for new particle formation (NPF). During the heterogeneous ozone reaction, in the presence of 220 ppb SO₂, an unsaturated aerosol (squalene) undergoes rapid chemical erosion, which is accompanied by NPF. A kinetic model predicts that the mechanism for chemical erosion and NPF originate from a common elementary step (CI + SO₂) that produces both gas phase SO₃ and small ketones. At low relative humidity (RH = 5%), 20% of the aerosol mass is lost, with 17% of the ozone-surface reactions producing SO₃. At RH = 60%, the aerosol shrinks by 30%, and the yield of SO₃ is <5%. This multiphase formation mechanism of H₂SO₄ by CIs is discussed in the context of indoor air quality and atmospheric chemistry.

Cholesterol provides nonsacrificial protection of membrane lipids from chemical damage at air-water interface

The role of cholesterol in bilayer and monolayer lipid membranes has been of great interest. On the biophysical front, cholesterol significantly increases the order of the lipid packing, lowers the membrane permeability, and maintains membrane fluidity by forming liquid-ordered-phase lipid rafts. However, direct observation of any influence on membrane chemistry related to these cholesterol-induced physical properties has been absent. Here we report that the addition of 30 mol % cholesterol to 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (POPG) monolayers at the air-water interface greatly reduces the oxidation and ester linkage cleavage chemistries initiated by potent chemicals such as OH radicals and HCl vapor, respectively. These results shed light on the indispensable chemoprotective function of cholesterol in lipid membranes. Another significant finding is that OH oxidation of unsaturated lipids generates Criegee intermediate, which is an important radical involved in many atmospheric processes.

Aerosol Health Effects from Molecular to Global Scales

Poor air quality is globally the largest environmental health risk. Epidemiological studies have uncovered clear relationships of gaseous pollutants and particulate matter (PM) with adverse health outcomes, including mortality by cardiovascular and respiratory diseases. Studies of health impacts by aerosols are highly multidisciplinary with a broad range of scales in space and time. We assess recent advances and future challenges regarding aerosol effects on health from molecular to global scales through epidemiological studies, field measurements, health-related properties of PM, and multiphase interactions of oxidants and PM upon respiratory deposition. Global modeling combined with epidemiological exposure-response functions indicates that ambient air pollution causes more than four million premature deaths per year. Epidemiological studies usually refer to PM mass concentrations, but some health effects may relate to specific constituents such as bioaerosols, polycyclic aromatic compounds, and transition metals. Various analytical techniques and cellular and molecular assays are applied to assess the redox activity of PM and the formation of reactive oxygen species. Multiphase chemical interactions of lung antioxidants with atmospheric pollutants are crucial to the mechanistic and molecular understanding of oxidative stress upon respiratory deposition. The role of distinct PM components in health impacts and mortality needs to be clarified by integrated research on various spatiotemporal scales for better evaluation and mitigation of aerosol effects on public health in the Anthropocene.