Efficient and selective oxidation of sulfur mustard using singlet oxygen generated by a pyrene-based metal-organic framework

Adsorption in Pyrene-Based Metal-Organic Frameworks: The Role of Pore Structure and Topology

Pore topology and chemistry play crucial roles in the adsorption characteristics of metal-organic frameworks (MOFs). To deepen our understanding of the interactions between MOFs and CO2 during this process, we systematically investigate the adsorption properties of a group of pyrene-based MOFs. These MOFs feature Zn(II) as the metal ion and employ a pyrene-based ligand, specifically 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy). Including different additional ligands leads to frameworks with distinctive structural and chemical features. By comparing these structures, we could isolate the role that pore size, the presence of open-metal sites (OMS), metal-oxygen bridges, and framework charges play in the CO2 adsorption of these MOFs. Frameworks with constricted pore structures display a phenomenon known as the confinement effect, fostering stronger MOF-CO2 interactions and higher uptakes at low pressures. In contrast, entropic effects dominate at elevated pressures, and the MOF's pore volume becomes the driving factor. Through analysis of the CO2 uptakes of the benchmark materials ─some with narrower pores and others with larger pore volumes─it becomes evident that structures with narrower pores and high binding energies excel at low pressures. In contrast, those with larger volumes perform better at elevated pressures. Moreover, this research highlights that open-metal sites and inherent charges within the frameworks of ionic MOFs stand out as CO2-philic characteristics.

Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Metal-Organic Frameworks as a Tunable Platform to Deconvolute Stereoelectronic Effects on the Catalytic Activity of Thioanisole Oxidation

The local environment of a metal active site plays an important role in affecting the catalytic activity and selectivity. In recent studies, tailoring the behavior of a molybdenum-based active site via modulation of the first coordination sphere has led to improved thioanisole oxidation performance, but disentangling electronic effects from steric influences that arise from these modifications is nontrivial, especially in heterogeneous systems. To this end, the tunability of metal-organic frameworks (MOFs) makes them promising scaffolds for controlling the coordination sphere of a heterogeneous, catalytically active metal site while offering additional attractive features such as crystallinity and high porosity. Herein, we report a variety of MOF-supported Mo species, which were investigated for catalytic thioanisole oxidation to methyl phenyl sulfoxide and/or methyl phenyl sulfone using tert-butyl hydroperoxide (tBHP) as the oxidant. In particular, MOFs of contrasting node architectures were targeted, presenting a unique opportunity to investigate the stereoelectronic control of Mo active sites in a systematic manner. A Zr6-based MOF, NU-1000, was employed along with its sulfated analogue Zr6-based NU-1000-SO4 to anchor a dioxomolybdenum species, which enabled examination of support-mediated active site polarizability on catalytic performance. In addition, a MOF containing a mixed metal node, Mo-MFU-4l, was used to probe the stereoelectronic impact of an N-donor ligand environment on the catalytic activity of the transmetalated Mo center. Characterization techniques, including single crystal X-ray diffraction, were concomitantly used with reaction time course profiles to better comprehend the dynamics of different Mo active sites, thus correlating structural change with activity.

Single-Chain Conjugated Polymer Guests Confined inside Metal-Organic Frameworks (MOFs): Boosting the Detection and Degradation of a Sulfur Mustard Simulant

Real-time detection and effective degradation of toxic gases have attracted considerable attention in environmental monitoring and human health. Here, we demonstrate a solvent-assisted dynamic assembly strategy to strongly enhance the detection and degradation performance for 2-chloroethyl ethyl sulfide (CEES, as a sulfur mustard simulant) via confinement of a conjugated polymer in metal-organic frameworks (MOFs). The conjugated polymer poly(9,9-di-n-octylfluorene-altbenzothiadiazole) (F8BT) is infiltrated into one-dimensional nanochannels of the Zr-based topological MOF NU-1000 in a single-chain manner, which is caused by the nanoconfinement effect and the steric hindrance between 9,9-dioctylfluorene units and benzothiadiazole units. The obtained F8BT⊂NU-1000 composites provide a high specific surface area and abundant active sites. Based on the cooperative effect of F8BT and NU-1000, rapid and sensitive detection of CEES has been achieved. Moreover, the F8BT⊂NU-1000 composites can selectively oxidize CEES into 2-chloroethyl ethyl sulfoxide (CEESO) under mild photooxidation conditions. Overall, this study opens a new avenue for the fabrication of conjugated polymer/MOF hybrid materials that show great potential for the sensitive detection and effective removal of hazardous chemicals.

Starfruit-Shaped Zirconium Metal-Organic Frameworks: From 3D Intermediates to 2D Nanosheet Petals with Enhanced Catalytic Activity

We present the fabrication of a novel Starfruit-shaped metal-organic framework (SMOF) composed of zirconium and Tetra(4-carboxyphenyl)porphine linkers. The SMOF exhibits a unique morphology with edge-sharing two-dimensional (2D) nanosheet petals. Our investigation unravels a captivating transformation process, wherein three-dimensional (3D) shuttle-shaped MOFs form initially and subsequently evolve into 2D nanosheet-based SMOF structures. The distinct morphology of SMOF showcases superior catalytic activity in detoxifying G-type nerve agent and blister agent simulants, surpassing that of its 3D counterparts. This discovery of the 3D-to-2D transition growth pathway unlocks exciting opportunities for exploring novel strategies in advanced MOF nanostructure development, not only for catalysis but also for various other applications.

De Novo Synthesis of Acridone-Based Zn-Metal-Organic Framework (Zn-MOF) as a Photocatalyst: Application for Visible Light-Mediated Oxidation of Sulfides and Enaminones

Acridone, a cyclic analogue of benzophenone that undergoes efficient intersystem crossing (ISC) to the triplet-excited state with near-unity quantum yield, was elaborated as a 3-connecting triacid linker, i.e., H3AcTA, to develop a photocatalytic metal-organic framework (MOF) for energy transfer applications; the triacid linker inherently features concave shapes, an attribute that is important for the construction of MOFs with significant porosity. Metal ion (Zn2+)-assisted self-assembly of the triacid yielded a Zn-MOF, i.e., Zn-AcTA, with a solvent-accessible volume of ca. 31%. The protection of the acridone chromophore in the MOF in conjunction with a wider cross-section of its absorption in the visible region renders the MOF an excellent heterogeneous photosensitizer for singlet oxygen (1O2) generation by energy transfer to the ground-state triplet oxygen (3O2). It is shown that the Zn-MOF can be applied as a photosensitizing catalyst for visible light-mediated oxidation of various sulfides to sulfoxides and enaminones to amino-esters via 1,2-acyl migration. It is further demonstrated that the photocatalyst can be easily recycled without any loss of catalytic activity and structural integrity. Based on mechanistic investigations, 1O2 is established as the reactive oxygen species in photocatalytic oxidation reactions. The results constitute the first demonstration of rational development of a photocatalytic MOF based on acridone for heterogeneous oxidations mediated by 1O2.

Rapid Oxidative Detoxification of Mustard Simulant by the Multisite Synergistic Catalytic Action of {PMoVI11MoVO40CuI8} Units

Under hydrothermal and solvent-thermal conditions, we synthesized two novel polyoxometalate (POM)-based hybrids: [CuI4(Pz)2(H2O)8(PMoVI11MoVO40)]·3.5H2O (1, Pz = pyrazine) and [(C2H8N)5(HPMoVI9MoV3O40)]·DMF·4H2O (2). Single-crystal X-ray diffraction indicates that compound 1 is a three-dimensional structure consisting of Cu (I), {PMo12} anions, Pz, and water, where Cu (I) can be considered as Lewis acid sites. Furthermore, both compounds 1 and 2 possess favorable catalysis activity in catalyzing the conversion of chemical warfare agent simulant 2-chloroethylethyl sulfide (CEES) to nontoxic production of 2-chloroethylethyl sulfoxide (CEESO) under ambient temperature. Significantly, 1 could realize 98% conversion and 100% selectivity of CEES owing to the multisite synergy in the {PMoVI11MoVO40CuI8} units in which the tricoordinated Cu (I) could interact with S and O atoms from CEES and H2O2, respectively. This interaction not only decreases the distance of CEES from peroxomolybdenum species formed by H2O2 but also activates CEES.

High Capacity Adsorption and Degradation of a Nerve Agent Simulant and a Pesticide by a Nickel Pyrazolate Metal-Organic Framework

The development of materials that enable the efficient removal of toxic compounds is important for the improvement of current protective materials or decontamination technologies. Current materials rely either on agent removal by adsorption or by effecting (catalytic) degradation. Ideally, both of these mechanisms are combined in a single material in order to target a more broad spectrum of toxic agents and to improve the performance of the materials. Recent attempts to combine materials with either adsorptive or catalytic properties into a composite material are promising, although the overall performance often suffers from competition for the agent between the adsorptive and catalytic domains in the composites. In this work, we propose that metal-organic frameworks (MOFs) could feature both adsorptive properties as well as catalytic properties in a single structural domain, thereby avoiding a reduction in the overall performance originating from competitive agent interactions. We showcase this concept using the MOF Ni3(BTP)2, which exhibits strong affinity and high capacity for the storage of a nerve agent simulant and a pesticide. Moreover, it is demonstrated that the adsorbed agents are efficiently degraded and that the nontoxic degradation products are rapidly expelled from the MOF pores. Its ability to catalyze the hydrolytic degradation of both organophosphate and organophosphorothioate compounds highlights another unique feature of this material. The presented concept illustrates the feasibility for developing materials that target a broader spectrum of agents via adsorption, catalysis, or both and by their broader reactivity toward different types of agents.

The Effect of Linker-to-Metal Energy Transfer on the Photooxidation Performance of an Isostructural Series of Pyrene-Based Rare-Earth Metal-Organic Frameworks

The tetratopic linker, 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4 TBAPy) along with rare-earth (RE) ions is used for the synthesis of 9 isostructures of a metal-organic framework (MOF) with shp topology, named RE-CU-10 (RE = Y(III), Gd(III), Tb(III), Dy(III), Ho(III), Er(III), Tm(III), Yb(III), and Lu(III)). The synthesis of each RE-CU-10 analogue requires different reaction conditions to achieve phase pure products. Single crystal X-ray diffraction indicates the presence of a RE9 -cluster in Y- to Tm-CU-10, while a RE11 -cluster is observed for Yb- and Lu-CU-10. The photooxidation performance of RE-CU-10 analogues is evaluated, observing competition between linker-to-metal energy transfer versus the generation of singlet oxygen. The singlet oxygen produced is used to detoxify a mustard gas simulant 2-chloroethylethyl sulfide, with half-lives ranging from 4.0 to 5.8 min, some of the fastest reported to date using UV-irradiation and < 1 mol% catalyst, in methanol under O2 saturation.

Ultrafast Photocatalytic Detoxification of Mustard Gas Simulants by a Mesoporous Metal-Organic Framework with Dangling Porphyrin Molecules

Developing effective catalysts to degrade chemical warfare agents is of great significance. Herein, a mesoporous MIL-101(Cr) composite material dangled with porphyrin molecules (denote as TCPP@MIL-101(Cr), TCPP = tetra(4-carboxyphenyl)porphyrin) is reported, which can be used as a heterogeneous photocatalyst for detoxification of mustard gas simulants 2-chloroethyl ethyl sulfide (CEES) to 2-chloroethyl ethyl sulfoxide (CEESO) with a half-life of 1 min. The catalytic performance of TCPP@MIL-101(Cr) is comparable to that of homogeneous molecular porphyrin. Mechanistic studies reveal that both 1 O2 and O2 •- are efficiently generated and play vital roles in the oxidation reaction. Gold nanoparticles (AuNPs) are attached to the TCPP@MIL-101(Cr) to further enhance the catalytic activity with a benchmark half-life of 45 s, which is the fastest record so far. A medical mask loaded TCPP@MIL-101(Cr) is fabricated for practical applications, which can selectively photoxidize CEES to CEESO under sunlight and air atmosphere, exhibiting the best degradation performance among the reported fabric-like composite materials.

Tunable Photocatalytic Singlet Oxygen Generation by Metal-Organic Frameworks via Functionalization of Pyrene-Containing Linkers

Metal-organic frameworks (MOFs) are highly versatile materials that have shown great promise in chemical warfare agent (CWA) adsorption and decontamination. Sulfur mustard has been one of the most prominently used CWAs over the last century; therefore, the development of effective detoxification strategies is of utmost importance. However, typical routes of detoxification are slow and/or result in the production of harmful byproducts. NU-1000 has previously shown promise as a "soft" oxidizer that can readily detoxify sulfur mustard and its simulant 2-chloroethyl ethyl sulfide (2-CEES) through the generation of singlet oxygen in the presence of either UV (396 nm) or blue (465 nm) light. Several variants of NU-1000 were synthesized (MOF-R, R = -Cl, -NO2, -CH3) with functional groups positioned either ortho or meta to the carboxylic acid on the linker. NU-1000-o-(Cl)4 and NU-1000-m-(Cl)4 showed significant enhancement of photooxidation of 2-CEES due to spin-orbit coupling, enhancing the intersystem crossing into the MOF triplet (T1) state. Furthermore, substitution of MOF linkers led to pyrene-phenyl rotation. Linkers with substituents in the ortho-position were shown to have smaller pyrene-phenyl torsion angles, leading to enhanced conjugation between the rings and a subsequent red shift in the absorption spectra. This red shift leads to enhanced reactivity of NU-1000-o-(Cl)4 under blue light conditions and gives perspective on making materials with enhanced reactivity utilizing visible light.

Advances in Metal-Organic Frameworks for the Removal of Chemical Warfare Agents: Insights into Hydrolysis and Oxidation Reaction Mechanisms

The destruction of chemical warfare agents (CWAs) is a crucial area of research due to the ongoing evolution of toxic chemicals. Metal-organic frameworks (MOFs), a class of porous crystalline solids, have emerged as promising materials for this purpose. Their remarkable porosity and large surface areas enable superior adsorption, reactivity, and catalytic abilities, making them ideal for capturing and decomposing target species. Moreover, the tunable networks of MOFs allow customization of their chemical functionalities, making them practicable in personal protective equipment and adjustable to dynamic environments. This review paper focuses on experimental and computational studies investigating the removal of CWAs by MOFs, specifically emphasizing the removal of nerve agents (GB, GD, and VX) via hydrolysis and sulfur mustard (HD) via selective photooxidation. Among the different MOFs, zirconium-based MOFs exhibit extraordinary structural stability and reusability, rendering them the most promising materials for the hydrolytic and photooxidative degradation of CWAs. Accordingly, this work primarily concentrates on exploring the intrinsic catalytic reaction mechanisms in Zr-MOFs through first-principles approximations, as well as the design of efficient degradation strategies in the aqueous and solid phases through the establishment of Zr-MOF structure-property relationships. Recent progress in the tuning and functionalization of MOFs is also examined, aiming to enhance practical CWA removal under realistic battlefield conditions. By providing a comprehensive overview of experimental findings and computational insights, this review paper contributes to the advancement of MOF-based strategies for the destruction of CWAs and highlights the potential of these materials to address the challenges associated with chemical warfare.

Porphyrin-Moiety-Functionalized Metal-Organic Layers Exhibiting Catalytic Capabilities for Detoxifying Nerve Agent and Blister Agent Simulants

The development of very efficient bifunctional catalysts for the simultaneous detoxification of two kinds of the deadliest chemical warfare agents (CWAs), nerve agent and blister agent, is highly desirable. In this study, two porphyrin-based ligands [tetrakis(4-carboxyphenyl) porphyrin (TCPP) and protoporphyrin IX (PPIX)] are introduced into 2D Zr-1,3,5-tris(4-carboxyphenyl)benzene (BTB) metal-organic layers (MOLs), composed of six-connected Zr₆ nodes and the tritopic carboxylate ligand BTB, by a solvent-assisted ligand incorporation method. The loads of TCPP and PPIX are 6.4 and 10.9 wt %, respectively. The detoxification of simulants of the nerve agent and the blister agent was conducted to investigate the catalytic activity of porphyrin-moiety-functionalized MOLs. The reaction half-life of optimal TCPP-functionalized MOL catalyzing the hydrolysis of a nerve agent simulant is only 2.8 min, meanwhile, the half-life of the selective catalytic oxidation of a blister agent simulant is only 1.2 min under LED illumination. More importantly, such a degradation half-life is only about 4 min under natural sunlight (∼60 mW/cm²). To our knowledge, TCPP-functionalized MOL is by far the most efficient catalyst for blister agent simulant degradation under solar light. Therefore, 2D ultrathin MOLs on demand appear to be a promising and efficient material platform for the development of bifunctional catalysts for CWA protection.

Dual-Function Detoxifying Nanofabrics against Nerve Agent and Blistering Agent Simulants

The development of functional materials that can detoxify multiple chemical warfare agents (CWAs) at the same time is of great significance to cope with the uncertainty of CWA use in real-world situations. Although many catalysts capable of detoxifying CWAs have been reported, there is still a lack of effective means to integrate these catalytic-active materials on practical fibers/fabrics to achieve effective protection against coexistence of a variety of CWAs. In this work, by a combination of electrospinning and in situ solvothermal reaction, PAN@Zr(OH)₄@MOF-808 nanofiber membranes were prepared for detoxification of both nerve agent and blistering agent simulants dimethyl 4-nitrophenyl phosphate (DMNP) and 2-chloroethyl ethyl sulfide (CEES). Under the catalytic effect of the MOF-808 component, DMNP hydrolysis with a half-life as short as 1.19 min was achieved. Meanwhile, an 89.3% CEES removal rate was obtained within 12 h by adsorption and catalysis of MOF-808 and Zr(OH)₄ components at ambient conditions, respectively. PAN@Zr(OH)₄@MOF-808 nanofiber membranes also showed a superior blocking effect on CEES compared to bare PAN and PAN@Zr(OH)₄ nanofiber membranes. Simultaneous protection against DMNP and CEES showed effective inhibition of both simulants for at least 2 h. The preparation method also imparted intrinsically good interfacial adhesion between the components, contributing to the excellent recycling stability of PAN@Zr(OH)₄@MOF-808 nanofiber membranes. Therefore, the prepared composite nanofabrics have great application potential, which provides a new idea for the construction of broad-spectrum protective detoxification materials.

Machine Learning-Aided Design of Gold Core-Shell Nanocatalysts toward Enhanced and Selective Photooxygenation

We demonstrate the use of the machine learning (ML) tools to rapidly and accurately predict the electric field as a guide for designing core-shell Au-silica nanoparticles to enhance ¹O₂ sensitization and selectivity of organic synthesis. Based on the feature importance analysis, obtained from a deep neural network algorithm, we found a general and linear dependent descriptor (θ ∝ aD^0.25t^-1, where a, D, and t are the shape constant, size of metal nanoparticles, and distance from the metal surface) for the electric field around the core-shell plasmonic nanoparticle. Directed by the new descriptor, we synthesized gold-silica nanoparticles and validated their plasmonic intensity using scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) mapping. The nanoparticles with θ = 0.40 demonstrate an ∼3-fold increase in the reaction rate of photooxygenation of anthracene and 4% increase in the selectivity of photooxygenation of dihydroartemisinic acid (DHAA), a long-standing goal in organic synthesis. In addition, the combination of ML and experimental investigations shows the synergetic effect of plasmonic enhancement and fluorescence quenching, leading to enhancement for ¹O₂ generation. Our results from time-dependent density functional theory (TD-DFT) calculations suggest that the presence of an electric field can favor intersystem crossing (ISC) of methylene blue to enhance ¹O₂ generation. The strategy reported here provides a data-driven catalyst preparation method that can significantly reduce experimental cost while paving the way for designing photocatalysts for organic drug synthesis.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO₂ was designed for photo-induced treating low-concentration NO_x indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional ^•O₂^- reactive species, a synergic effect between a singlet oxygen (¹O₂) and mobile hydroxyl radicals (^•OH_f) was first illustrated for removing NO_x indoor gas (¹O₂ + 2NO → 2NO₂, NO₂ + ^•OH_f → HNO₃), inhibiting the production of the byproducts of NO₂. This work is helpful for understanding the surface mechanism of photocatalytic NO_x oxidation and provides a new perspective for the development of highly efficient air purification systems.

Use of porphyrin-containing polymers of intrinsic microporosity as selective photocatalysts for oxidative detoxification of chemical warfare agent simulant

Porphyrin-based polymers of intrinsic microporosity (PIMs) in photocatalytic degradation of a mustard-gas simulant (2-chloroethyl ethyl sulfide (2-CEES)) was demonstrated. Under blue-ultraviolet (UV) light-emitting diode (LED) irradiation, porphyrin-based PIMs PP-H2 and PP-Zn(II) worked as effective heterogeneous photocatalysts for oxidation of 2-CEES. Solvent played an important role in the conversion and selectivity of 2-CEES oxidation. When AcCN was used as a solvent, PP-H2and PP-Zn(II) demonstrated complete conversion of 2-CEES in 30 and 50 min, respectively, whereas they showed complete conversion at 60 and 70 min, respectively, when MeOH was used as a solvent. Moreover, these PIMs produced 2-chloroethyl ethyl sulfoxide (2-CEESO) as a major product with small amounts of 2-chloroethyl ethyl sulfone (2-CEESO[Formula: see text], ethyl methoxyethyl sulfoxide (EMSO), and vinyl sulfoxide (EVS) as side products in most solvents. However, when MeOH was used as a solvent, highly toxic 2-CEESO2 was not observed as a side product. Furthermore, these PIMs showed no significant changes in photocatalytic activity even after five cycles of reuse, indicating their high stability. Thus, the series of PIMs prepared herein can perform well as heterogeneous catalysts in photooxidation of 2-CEES under blue-UV LED light, with PP-H2 being the most effective oxidation catalyst, leading to fast conversion and high selectivity.

Surface- and Structural-Dependent Reactivity of Titanium Oxide Nanostructures with 2-Chloroethyl Ethyl Sulfide under Ambient Conditions

Robust materials capable of heterogeneous reactivity are valuable for addressing toxic chemical clean up. Synthetic manipulations for generating titanium oxide nanomaterials have been utilized to alter both photochemical (1000 nm > λ > 400 nm) and chemical heterogeneous reactivity with 2-chloroethyl ethyl sulfide (2-CEES). Synthesizing TiO₂ nanomaterials in the presence of long-chain alkylphosphonic acids enhanced the visible light-driven oxidation of the thioether sulfur of 2-CEES. Photooxidation reaction rates of 99 and 168 μmol/g/h (quantum yields of 5.07 × 10^-4 and 8.58 × 10^-4 molecules/photon, respectively) were observed for samples made with two different alkylphosphonic acids (C₁₄H₂₉PO₃H₂ and C₉H₁₉PO₃H₂, respectively). These observations are correlated with (i) generation of new surface defects/states (i.e., oxygen vacancies) as a result of TiO₂ grafting by alkylphosphonic acid that may serve as reaction active sites, (ii) better light absorption by assemblies of nanorods and nanowires in comparison to individual nanorods, (iii) surface area differences, and (iv) the exclusion of OH groups due to the surface functionalization with alkylphosphonic acids via Ti-O-P bonds on the TiO₂. Alternatively, nanowire-form H₂Ti₂O₅·H₂O was produced and found to be capable of highly efficient hydrolysis of the carbon-chlorine (C-Cl) bond of 2-CEES in the dark with a reaction rate of 279.2 μmol/g/h due to the high surface area and chemical nature of the titanate structure.

Insight into the role of charge carrier mediation zone for singlet oxygen production over rod-shape graphitic carbon nitride: Batch and continuous-flow reactor

As a new approach of creating the photo-exited electron (e^-) and hole (h⁺) mediation zone for highly selective singlet oxygen (¹O₂) production, the rod-type graphitic carbon nitride (NCN) has been synthesized from the nitric acid-modified melamine followed by the calcination. The NCN exhibited a higher surface area and surface oxygen adsorption ability than bulk graphitic carbon nitride (BCN). The increment of CO and NH_x groups on NCN corresponded to e^- and h⁺ mediation groups, respectively, resulting in higher production of ¹O₂ than BCN. Moreover, those mediation groups on NCN result in higher recombination efficiency and longer e^- decay time. As a result, the optimized NCN-0.5 (derived from 0.5 M of nitric acid-modified melamine) displayed 5.8 times higher kinetic rate constant of atrazine (ATZ) removal under UVA-LED irradiation compared to BCN. This study also evaluated the ATZ degradation pathways and toxicity effect of by-products. In addition, continuous flow experiments using NCN-0.5 showed superior ATZ removal performance with a hybrid concept between a slurry photocatalysis and a continuous stirred tank reactor system using actual effluent obtained from a wastewater treatment plant. Thus, this work provides an insight into the strategy for highly selective ¹O₂ production and the potential for water purification application.

An excellent multifunctional photocatalyst cooperated by polyoxometalate-viologen framework for CEES oxidation, Cr(VI) reduction and dyes decolorization under different light regimes

Photocatalytic detoxification of highly toxic agents is a promising approach to protect ecological environment and human health, and the key problem lies in the development of novel efficient photocatalysts. Herein,...

Enhancing the quantum yield of singlet oxygen: photocatalytic degradation of mustard gas simulant 2-chloroethyl ethyl sulfide catalyzed by a hybrid of polyhydroxyl aluminum cations and porphyrin anions

By combining the anionic salt meso-tetra(4-carboxyphenyl)porphyrin (TCPP⁴⁻) and the Keggin polyoxometalate cation cluster [Al₁₃O₄(OH)₂₄(H₂O)₁₂]⁷⁺via a simple ion-exchange method, a hybrid (C₄₈H₂₆N₄O₈)[Al₁₃O₄(OH)₂₄(H₂O)₁₂]₂(OH)₁₀·18H₂O (Al₁₃–TCPP) was prepared and thoroughly characterized as a prototype of polyoxometalate–porphyrin hybrids for the photocatalytic degradation of the mustard gas simulant 2-chloroethyl ethyl sulfide (CEES). The experimental results showed that the catalytic degradation rate of CEES in the presence of Al₁₃–TCPP reached 96.16 and 99.01% in 180 and 90 min in methanol and methanol–water solvent mixture (v/v = 1 : 1), respectively. The reaction followed first-order reaction kinetics, and the half-life and kinetic constant in methanol and solvent mixture were 39.8 min, −0.017 min⁻¹ and 14.7 min, −0.047 min⁻¹. Mechanism analysis indicated that under visible light irradiation in air, CEES was degraded through a combination of oxidation and alcoholysis/hydrolysis in methanol and the methanol–water solvent mixture. The superoxide radical (O₂˙⁻) and singlet molecular oxygen (¹O₂) generated by Al₁₃–TCPP selectively oxidized CEES into a non-toxic sulfoxide. The singlet oxygen capture experiments showed that Al₁₃–TCPP (Φ = 0.236) had a higher quantum yield of singlet oxygen generation than H₄TCPP (Φ = 0.135) under visible light irradiation in air. The material Al₁₃–TCPP has good reusability, and the degradation rate of CEES can still reach 98.37% after being recycled five times.

A hybrid Al₁₃–TCPP was thoroughly characterized as a prototype of polyoxometalate–porphyrin hybrids for the photocatalytic degradation of the mustard gas simulant 2-chloroethyl ethyl sulfide (CEES).

Vapor phase catalytic photooxidation of sulfides to sulfoxides: application to the neutralization of sulfur mustard simulants

A visible-light photocatalytic approach was developped for the aerobic oxidation of sulfides into the corresponding sulfoxides, including sulfur mustard simulants. The heterogeneous catalytic system is selective, operates in the gas...

Immobilized Regenerable Active Chlorine within a Zirconium-Based MOF Textile Composite to Eliminate Biological and Chemical Threats

The most recent global health crisis caused by the SARS-CoV-2 outbreak and the alarming use of chemical warfare agents highlight the necessity to produce efficient protective clothing and masks against biohazard and chemical threats. However, the development of a multifunctional protective textile is still behind to supply adequate protection for the public. To tackle this challenge, we designed multifunctional and regenerable N-chlorine based biocidal and detoxifying textiles using a robust zirconium metal-organic framework (MOF), UiO-66-NH₂, as a chlorine carrier which can be easily coated on textile fibers. A chlorine bleaching converted the amine groups located on the MOF linker to active N-chlorine structures. The fibrous composite exhibited rapid biocidal activity against both Gram-negative bacteria (E. coli) and Gram-positive bacteria (S. aureus) with up to a 7 log reduction within 5 min for each strain as well as a 5 log reduction of SARS-CoV-2 within 15 min. Moreover, the active chlorine loaded MOF/fiber composite selectively and rapidly degraded sulfur mustard and its chemical simulant 2-chloroethyl ethyl sulfide (CEES) with half-lives less than 3 minutes. The versatile MOF-based fibrous composite designed here has the potential to serve as protective cloth against both biological and chemical threats.

Photo-assisted enhancement performance for rapid detoxification of chemical warfare agent simulants over versatile ZnIn2S4/UiO-66-NH2 nanocomposite catalysts

Constructing versatile materials with self-detoxification properties are highly desired for emergency destruction of chemical warfare agents (CWAs). Herein, we first reported in-situ fabrication of ZnIn₂S₄/UiO-66-NH₂ nanocomposites (ZnInS/UiO) and their application in catalytic detoxification of two CWA simulants. For nerve agent simulant dimethyl 4-nitrophenyl phosphate (DMNP), the optimal ZnInS/UiO-23.9 displayed 5.9 times increase in hydrolysis rate having the turnover frequency (TOF) of 0.0586 s^-1 under simulated solar light (SSL), which is superior to the reported UiO-based catalysts. Photo-assisted enhancement in DMNP detoxification was due to photothermal effect of ZnInS and close interfacial contact in ZnInS/UiO heterostructures, facilitating instantaneous heat transfer from ZnInS to UiO catalytic sites. As for mustard gas surrogate 2-chloroethyl ethyl sulfide (CEES), under SSL irradiation for 15 min, ZnInS/UiO-23.9 can eliminate 96.7% of CEES in droplet experiment, being 4.17 and 3.24 times of ZnInS and UiO accordingly. It was ascribed to spatial separation of photoinduced electron-hole pairs and photothermally-assisted charge transfer in ZnInS/UiO composites, improving catalytic activity for CEES detoxification. Besides, the detected products suggested that CEES conversion underwent reductive dechlorination, radical reactions and hydrolysis. This study can be extended to other multifunctional catalysts based on metal-organic frameworks and provides new opportunities for photoassisted enhanced detoxification of CWAs.

Superoxide Ion and Singlet Oxygen Photogenerated by Metalloporphyrin-Based Metal-Organic Frameworks for Highly Efficient and Selective Photooxidation of a Sulfur Mustard Simulant

The exploration of highly efficient materials for the degradation of chemical warfare agents has been a longstanding task for preventing human exposure. Herein, we report a series of metal-organic frameworks (MOFs) M-TCPP-La based on metallo-tetra(4-carboxyphenyl)porphyrin and La^III, which were applied to selectively oxidize 2-chloroethyl ethyl sulfide (CEES, a sulfur mustard simulant) as heterogeneous photocatalysts. After irradiation from a commercial blue light-emitting diode (LED), both superoxide ion and singlet oxygen were generated by M-TCPP-La and involved in selective oxidization of CEES to 2-chloroethyl ethyl sulfoxide (CEESO). Notably, a very short half lifetime (2.5 min) was achieved using Fe-TCPP-La as the photocatalyst. In comparison to currently utilizing singlet oxygen and hydrogen peroxide as oxidizing agents, this work employing both singlet oxygen and superoxide ion represents a new and effective strategy of detoxification of mustard gas.

Reduced polyoxomolybdate immobilized on reduced graphene oxide for rapid catalytic decontamination of a sulfur mustard simulant

Keggin-type polyoxometalates (POMs) were immobilized on poly(diallyldimethylammonium chloride) (PDDA) functionalized reduced graphene oxide (rGO) by a facile and broad-spectrum hydrothermal method. The prepared POMs@PDDA-rGO composites (POM = H3PMo12O40, H3PW12O40, H5PMo10V2O40) have been thoroughly characterized using a series of techniques. The three composites can catalyze the oxidative decontamination of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES) in the order of PMo12@PDDA-rGO > PMo10V2@PDDA-rGO > PW12@PDDA-rGO. Notably, under ambient conditions PMo12@PDDA-rGO can convert 99% of CEES within 30 min in the presence of nearly stoichiometric aqueous H2O2 (3 wt%) and its catalytic activity is significantly higher than that of homogeneous H3PMo12O40. XPS spectral analysis and control experiments indicate that the Mo center of POM is reduced from +6 to +5 during the hydrothermal process, and the excellent catalytic performance is related to the reduction of Mo. Moreover, the PMo12@PDDA-rGO composite is stable during the decontamination process and it can be used for at least five cycles without loss of activity.

Effective degradation of sulfur mustard simulant using novel sulfur-doped mesoporous zinc oxide under ambient conditions

Sulfur doped metal oxides were synthesized using a two-step precipitation method. When reacted against neat 2-CEES (2-chloroethyl-ethyl sulfide, a mustard gas simulant) under ambient conditions, sulfur doped mesoporous zinc oxide (MS-Zn) showed higher catalytic activity than the other metal oxides with 92.7% overall conversion in 24 h for a 2.5 μL neat 2-CEES droplet added on top of 2 × 2 cm large 400 mg catalyst layer. The reaction proceeded mainly by hydrolysis and further solvolysis reaction also occurred depending on the extracting solvents. Cyclic sulfonium ion intermediate reaction was thought to be involved in this reaction, and metal oxide surfaces were thought to facilitate the formation of sulfonium ions from adsorbed 2-CEES. All other by-products were also found to form via sulfonium ions, reconfirming the well-known importance of this intermediate species for the degradation reaction to proceed. The sulfur content for MS-Zn was varied and tested for degradation of neat 2-CEES. This modification showed that there is an optimal amount of sulfur content for the peak catalytic activity of MS-Zn for 2-CEES degradation. Adsorption energy of a 2-CEES molecule was calculated on model sulfur doped and non doped zinc oxide surfaces and the different adsorption energy levels were correlated with the catalytic activity of sulfur doped zinc oxide.

Trapping and Releasing of Oxygen in Liquid by Metal-Organic Framework with Light and Heat

Nanoporous materials can adsorb small molecules into their nanospaces. However, the trapping of light gas molecules dissolved in solvents suffers from low concentration and poor adsorption affinity. Here, the reversible trapping and releasing of dissolved oxygen are shown through integrating photosensitization and chemical capturing abilities into a metal-organic framework (MOF), MOMF-1. 9,10-Di(4-pyridyl)anthracene (dpa) ligands in MOMF-1 generates singlet oxygen from triplet oxygen under photoirradiation without additional photosensitizers, and successively reacts with it to produce anthracene endoperoxide, forming MOMF-2, which is proved crystallographically. The reverse reaction also proceeds quantitatively by heating MOMF-2. Moreover, MOMF-1 exhibits excellent water resistance, and completely removes oxygen of ppm order concentrations in water. The new material shown in this report allows controlling of the amount of dissolved oxygen, which can be applicable in various fields relating to numerous oxidation phenomena.

Pyrene-based metal organic frameworks: from synthesis to applications

Pyrene is one of the most widely investigated aromatic hydrocarbons given to its unique optical and electronic properties. Hence, pyrene-based ligands have been attractive for the synthesis of metal-organic frameworks (MOFs) in the last few years. In this review, we will focus on the most important characteristics of pyrene, in addition to the development and synthesis of pyrene-based molecules as bridging ligands to be used in MOF structures. We will summarize the synthesis attempts, as well as the post-synthetic modifications of pyrene-based MOFs by the incorporation of metals or ligands in the structure. The discussion of promising results of such MOFs in several applications; including luminescence, photocatalysis, adsorption and separation, heterogeneous catalysis, electrochemical applications and bio-medical applications will be highlighted. Finally, some insights and future prospects will be given based on the studies discussed in the review. This review will pave the way for the researchers in the field for the design and development of novel pyrene-based structures and their utilization for different applications.

A solvent-free solid catalyst for the selective and color-indicating ambient-air removal of sulfur mustard

Bis(2-chloroethyl) sulfide or sulfur mustard (HD) is one of the highest-tonnage chemical warfare agents and one that is highly persistent in the environment. For decontamination, selective oxidation of HD to the substantially less toxic sulfoxide is crucial. We report here a solvent-free, solid, robust catalyst comprising hydrophobic salts of tribromide and nitrate, copper(II) nitrate hydrate, and a solid acid (Nafion^TM) for selective sulfoxidation using only ambient air at room temperature. This system rapidly removes HD as a neat liquid or a vapor. The mechanisms of these aerobic decontamination reactions are complex, and studies confirm reversible formation of a key intermediate, the bromosulfonium ion, and the role of Cu(II). The latter increases the rate four-fold by increasing the equilibrium concentration of bromosulfonium during turnover. Cu(II) also provides a colorimetric detection capability. Without HD, the solid is green, and with HD, it is brown. Bromine K-edge XANES and EXAFS studies confirm regeneration of tribromide under catalytic conditions. Diffuse reflectance infrared Fourier transform spectroscopy shows absorption of HD vapor and selective conversion to the desired sulfoxide, HDO, at the gas-solid interface.

Decomposition of the Simulant 2-Chloroethyl Ethyl Sulfide Blister Agent under Ambient Conditions Using Metal-Organic Frameworks

Metal organic frameworks (MOFs) have been suggested as promising materials for application in the degradation of chemical warfare agents, with the majority of studies to date focusing on nerve agents. One of the most prominent MOFs used in the detoxification of nerve agents is UiO-66, which is of interest as a future nerve agent decontaminant. However, blister agents, which constitute one of the most toxic and highly reactive categories of chemical agents, are yet to be examined as gas-phase decontamination targets using MOF structures. In this study, a novel type of UiO-66 with a smaller particle size, namely, UiO-66S, was used as a decontaminant for the blister agent simulant, 2-chloroethyl ethyl sulfide (2-CEES). The gas-phase chemical adsorption and decomposition of 2-CEES were demonstrated for the first time, with an estimated t_1/2 of 1.34 h. This value is the highest reported value for an MOF in gas-phase reaction conditions. The obtained nontoxic degradation products were identified, and the reaction mechanism was studied using density functional theory calculations. Furthermore, the synthesized UiO-66S catalyst also exhibits superior catalytic ability toward nerve agent simulants (diisopropyl fluorophosphate).The results of the study provide a firm basis for the use of UiO-66S as a future decontaminant for both nerve and blister agents.

Cobalt-Based Metal Organic Frameworks as Solids Catalysts for Oxidation Reactions

Metal organic frameworks (MOFs) are porous crystalline solids whose frameworks are constituted by metal ions/nodes with rigid organic linkers leading to the formation of materials having high surface area and pore volume. One of the unique features of MOFs is the presence of coordinatively unsaturated metal sites in their crystalline lattice that can act as Lewis acid sites promoting organic transformations, including aerobic oxidation reactions of various substrates such as hydrocarbons, alcohols, and sulfides. This review article summarizes the existing Co-based MOFs for oxidation reactions organized according to the nature of substrates like hydrocarbon, alcohol, olefin, and water. Both aerobic conditions and peroxide oxidants are discussed. Emphasis is placed on comparing the advantages of using MOFs as solid catalysts with respect to homogeneous salts in terms of product selectivity and long-term stability. The final section provides our view on future developments in this field.

Chemical targets to deactivate biological and chemical toxins using surfaces and fabrics

The most recent global health and economic crisis caused by the SARS-CoV-2 outbreak has shown us that it is vital to be prepared for the next global threat, be it caused by pollutants, chemical toxins or biohazards. Therefore, we need to develop environments in which infectious diseases and dangerous chemicals cannot be spread or misused so easily. Especially, those who put themselves in situations of most exposure - doctors, nurses and those protecting and caring for the safety of others - should be adequately protected. In this Review, we explore how the development of coatings for surfaces and functionalized fabrics can help to accelerate the inactivation of biological and chemical toxins. We start by looking at recent advancements in the use of metal and metal-oxide-based catalysts for the inactivation of pathogenic threats, with a focus on identifying specific chemical bonds that can be targeted. We then discuss the use of metal-organic frameworks on textiles for the capture and degradation of various chemical warfare agents and their simulants, their long-term efficacy and the challenges they face.

Regioselective Functionalization of the Mesoporous Metal-Organic Framework, NU-1000, with Photo-Active Tris-(2,2'-bipyridine)ruthenium(II)

Solvent-assisted ligand incorporation is an excellent method for the post-synthetic functionalization of Zr-based metal-organic frameworks (MOFs), as carboxylate-derivative functionalities readily coordinate to the Zr6 nodes by displacing node-based aqua and terminal hydroxo ligands. In this study, a photocatalytically active ruthenium complex RuII(bpy)2(dcbpy), that is, bis-(2,2'-bipyridine)-(4,4'-dicarboxy-2,2'-bipyridine)ruthenium, was installed in the mono-protonated (carboxylic acid) form within NU-1000 via SALI. Crystallographic information regarding the siting of the ruthenium complex within the MOF pores is obtained by difference envelope density analysis. The ruthenium-functionalized MOF, termed Ru-NU-1000, shows excellent heterogeneous photocatalytic activity for an oxidative amine coupling reaction.

Supramolecular Porous Organic Nanocomposites for Heterogeneous Photocatalysis of a Sulfur Mustard Simulant

Efficient heterogeneous photosensitizing materials require both large accessible surface areas and excitons of suitable energies and with well-defined spin structures. Confinement of the tetracationic cyclophane (ExBox⁴⁺ ) within a nonporous anionic polystyrene sulfonate (PSS) matrix leads to a surface area increase of up to 225 m² g^-1 in ExBox•PSS. Efficient intersystem crossing is achieved by combining the spin-orbit coupling associated to Br heavy atoms in 1,3,5,8-tetrabromopyrene (TBP), and the photoinduced electron transfer in a TBP⊂ExBox⁴⁺ supramolecular dyad. The TBP⊂ExBox⁴⁺ complex displays a charge transfer band at 450 nm and an exciplex emission at 520 nm, indicating the formation of new mixed-electronic states. The lowest triplet state (T₁ , 1.89 eV) is localized on the TBP and is close in energy with the charge separated state (CT, 2.14 eV). The homogeneous and heterogeneous photocatalytic activities of the TBP⊂ExBox⁴⁺ , for the elimination of a sulfur mustard simulant, has proved to be significantly more efficient than TBP and ExBox⁺⁴ , confirming the importance of the newly formed excited-state manifold in TBP⊂ExBox⁴⁺ for the population of the low-lying T₁ state. The high stability, facile preparation, and high performance of the TBP⊂ExBox•PSS nanocomposites augur well for the future development of new supramolecular heterogeneous photosensitizers using host-guest chemistry.