An eco-friendly in situ activatable antibiotic via cucurbit[8]uril-mediated supramolecular crosslinking of branched polyethylenimine

Peptide recognition by a synthetic receptor at subnanomolar concentrations

This paper describes the discovery and characterization of a dipeptide sequence, Lys-Phe, that binds to the synthetic receptor cucurbit[8]uril (Q8) in neutral aqueous solution with subnanomolar affinity when located at the N-terminus. The thermodynamic and structural basis for the binding of Q8 to a series of four pentapeptides was characterized by isothermal titration calorimetry, NMR spectroscopy, and X-ray crystallography. Submicromolar binding affinity was observed for the peptides Phe-Lys-Gly-Gly-Tyr (FKGGY, 0.3 μM) and Tyr-Leu-Gly-Gly-Gly (YLGGG, 0.2 μM), whereas the corresponding sequence isomers Lys-Phe-Gly-Gly-Tyr (KFGGY, 0.3 nM) and Leu-Tyr-Gly-Gly-Gly (LYGGG, 1.2 nM) bound to Q8 with 1000-fold and 170-fold increases in affinity, respectively. To our knowledge, these are the highest affinities reported between a synthetic receptor and an unmodified peptide. The high-resolution crystal structures of the Q8·Tyr-Leu-Gly-Gly-Gly and Q8·Leu-Tyr-Gly-Gly-Gly complexes have enabled a detailed analysis of the structural determinants for molecular recognition. The high affinity, sequence-selectivity, minimal size of the target binding site, reversibility in the presence of a competitive guest, compatibility with aqueous media, and low toxicity of Q8 should aid in the development of applications involving low concentrations of target polypeptides.

Cucurbit[8]uril Binds Nonterminal Dipeptide Sites with High Affinity and Induces a Type II β-Turn

In an effort to target polypeptides at nonterminal sites, we screened the binding of the synthetic receptor cucurbit[8]uril (Q8) to a small library of tetrapeptides, each containing a nonterminal dipeptide binding site. The resulting leads were characterized in detail using a combination of isothermal titration calorimetry, 1H NMR spectroscopy, electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS), and X-ray crystallography. The equilibrium dissociation constant values determined for the binding of Q8 to nonterminal dipeptide sites Lys-Phe (KF) and Phe-Lys (FK) were 60 and 86 nm, respectively. These are to the best of our knowledge the highest affinities reported to date for any synthetic receptor targeting a nonterminal site on an unmodified peptide. A 0.79 Å resolution crystal structure was obtained for the complex of Q8 with the peptide Gly-Gly-Leu-Tyr-Gly-Gly-Gly (GGLYGGG) and reveals structural details of the pair-inclusion motif. The molecular basis for recognition is established to be the inclusion of the side chains of Leu and Tyr residues, as well as an extensive network of hydrogen bonds between the peptide backbone, the carbonyl oxygens of Q8, and proximal water molecules. In addition, the crystal structure reveals that Q8 induces a type II β-turn. The sequence-selectivity, high affinity, reversibility, and detailed structural characterization of this system should facilitate the development of applications involving ligand-induced polypeptide folding.

PEI-based functional materials: Fabrication techniques, properties, and biomedical applications

Cationic polymers have recently attracted considerable interest as research breakthroughs for various industrial and biomedical applications. They are particularly interesting due to their highly positive charges, acceptable physicochemical properties, and ability to undergo further modifications, making them attractive candidates for biomedical applications. Polyethyleneimines (PEIs), as the most extensively utilized polymers, are one of the valuable and prominent classes of polycations. Owing to their flexible polymeric chains, broad molecular weight (MW) distribution, and repetitive structural units, their customization for functional composites is more feasible. The specific beneficial attributes of PEIs could be introduced by purposeful functionalization or modification, long service life, biocompatibility, and distinct geometry. Therefore, PEIs have significant potential in biotechnology, medicine, and bioscience. In this review, we present the advances in PEI-based nanomaterials, their transfection efficiency, and their toxicity over the past few years. Furthermore, the potential and suitability of PEIs for various applications are highlighted and discussed in detail. This review aims to inspire readers to investigate innovative approaches for the design and development of next-generation PEI-based nanomaterials possessing cutting-edge functionalities and appealing characteristics.

Type I Photosensitizer Targeting Glycans: Overcoming Biofilm Resistance by Inhibiting the Two-Component System, Quorum Sensing, and Multidrug Efflux

Stubborn biofilm infections pose serious threats to human health due to the persistence, recurrence, and dramatically magnified antibiotic resistance. Photodynamic therapy has emerged as a promising approach to combat biofilm. Nevertheless, how to inhibit the bacterial signal transduction system and the efflux pump to conquer biofilm recurrence and resistance remains a challenging and unaddressed issue. Herein, a boric acid-functionalized lipophilic cationic type I photosensitizer, ACR-DMP, is developed, which efficiently generates •OH to overcome the hypoxic microenvironment and photodynamically eradicates methicillin-resistant Staphylococcus aureus (MRSA) and biofilms. Furthermore, it not only alters membrane potential homeostasis and osmotic pressure balance due to its strong binding ability with plasma membrane but also inhibits quorum sensing and the two-component system, reduces virulence factors, and regulates the activity of the drug efflux pump attributed to the glycan-targeting ability, helping to prevent biofilm recurrence and conquer biofilm resistance. In vivo, ACR-DMP successfully obliterates MRSA biofilms attached to implanted medical catheters, alleviates inflammation, and promotes vascularization, thereby combating infections and accelerating wound healing. This work not only provides an efficient strategy to combat stubborn biofilm infections and bacterial multidrug resistance but also offers systematic guidance for the rational design of next-generation advanced antimicrobial materials.

Preparation and Biomedical Applications of Cucurbit[n]uril-Based Supramolecular Hydrogels

The cucurbit[n]uril supramolecular hydrogels are driven by weak intermolecular interactions, of which exhibit good stimuli responsiveness and excellent self-healing properties. According to the composition of the gelling factor, supramolecular hydrogels comprise Q[n]-cross-linked small molecules and Q[n]-cross-linked polymers. According to different driving forces, hydrogels are driven by the outer-surface interaction, the host-guest inclusion interaction, and the host-guest exclusion interaction. Host-guest interactions are widely used in the construction of self-healing hydrogels, which can spontaneously recover after being damaged, thereby prolonging their service life. The smart Q[n]s-based supramolecular hydrogel composed is a kind of adjustable and low-toxicity soft material. By designing the structure of the hydrogel or modifying the fluorescent properties, etc., it can be widely used in biomedicine. In this review, we mainly focus on the preparation of Q[n]-based hydrogels and their biomedical applications including cell encapsulation for biocatalysis, biosensors for high sensitivity, 3D printing for potential tissue engineering, drug release for sustained delivery, and interfacial adhesion for self-healing materials. In addition, we also presented the current challenges and prospects in this field.

Supramolecularly assisted chlorhexidine-bacterial membrane interaction with enhanced antibacterial activity and reduced side effects

Bacterial infection has emerged as a grievous threat to public health, and lots of antibacterial agents were developed to solve this issue. However, enhancing the antibacterial activity of antibacterial agents while reducing their side effects remains a challenge. Herein, a supramolecular antibacterial agent based on the host-guest interaction between cucurbit[7]uril (CB[7]) and chlorhexidine (CHX) was designed. CHX can be encapsulated in the cavity of CB[7] to form a 1:3 host-guest complex (CHX-3CB[7]). It was amazingly found that this supramolecular complex could display higher antibacterial activity than CHX alone. Electrospray mass spectrometry and UV-vis spectra revealed that the introduction of CB[7] promoted the protonation of N-atoms on CHX, resulting in stronger ion interaction with phospholipids and thus enhancing the destruction of the bacterial membrane. Scanning electron microscopy (SEM), surface ζ-potentials and outer/inner membrane integrity assays also reveal that the introduction of CB[7] aggravates the rupture of membrane. What is more, the cytotoxicity and irritation of CHX were decreased by forming the host-guest complex with CB[7]. This work provides a paradigm for enhancing antibacterial activity and reducing side effects of drugs through supramolecular chemistry.

Host-guest synergistic enhancement of antibacterial effect by a supramolecular strategy

A supramolecular synergistic antibacterial strategy involving direct complexation of a commercial antibacterial agent, azelaic acid (AzA) by a cationic pillar[5]arene (WP5A) is described. The formation of AzA/WP5A complex could exert synergistic antibacterial effect, leading to promote wound healing efficacy and reduce bacterial burden on S. aureus-infected mice models.

Regulation of Antimicrobial Effect of Hemicyanine-Based Photosensitizer via Supramolecular Assembly

An intelligent "antimicrobial switch" has been constructed to reduce prolonged exposure of pathogenic bacteria to antibiotics, which could reversibly "turn off" or "turn on" the antimicrobial activity of hemicyanines through self-assembly or dis-assembly of cucurbit[7]uril (CB[7]). This assembly effectively inhibited the production of ROS under light, shielding the active site of hemicyanines and achieving on-demand antimicrobial ability. Moreover, CB[7] differentially inhibits ROS of molecules with different alkyl chain lengths, which provided reference for the subsequent design of materials with antimicrobial activity regulation, and could effectively delay or even prevent the development of pathogens resistance.

Multicharged cyclodextrin supramolecular assemblies

Multicharged cyclodextrin (CD) supramolecular assemblies, including those based on positively/negatively charged modified mono-6-deoxy-CDs, per-6-deoxy-CDs, and random 2,3,6-deoxy-CDs, as well as parent CDs binding positively/negatively charged guests, have been extensively applied in chemistry, materials science, medicine, biological science, catalysis, and other fields. In this review, we primarily focus on summarizing the recent advances in positively/negatively charged CDs and parent CDs encapsulating positively/negatively charged guests, especially the construction process of supramolecular assemblies and their applications. Compared with uncharged CDs, multicharged CDs display remarkably high antiviral and antibacterial activity as well as efficient protein fibrosis inhibition. Meanwhile, charged CDs can interact with oppositely charged dyes, drugs, polymers, and biomacromolecules to achieve effective encapsulation and aggregation. Consequently, multicharged CD supramolecular assemblies show great advantages in improving drug-delivery efficiency, the luminescence properties of materials, molecular recognition and imaging, and the toughness of supramolecular hydrogels, in addition to enabling the construction of multistimuli-responsive assemblies. These features are anticipated to not only promote the development of CD-based supramolecular chemistry but also contribute to the rapid exploitation of these assemblies in diverse interdisciplinary applications.

On-Resin Recognition of Aromatic Oligopeptides and Proteins through Host-Enhanced Heterodimerization

Peptide dimerization is ubiquitous in natural protein conjugates and artificial self-assemblies. A major challenge in artificial systems remains achieving quantitative peptide heterodimerization, critical for next-generation biomolecular purification and formulation of therapeutics. Here, we employ a synthetic host to simultaneously encapsulate an aromatic and a noncanonical l-perfluorophenylalanine-containing peptide through embedded polar-π interactions, constructing an unprecedented series of heteropeptide dimers. To demonstrate the utility, this heteropeptide dimerization strategy was applied toward on-resin recognition of N-terminal aromatic residues in peptides as well as insulin, both exhibiting high recycling efficiency (>95%). This research unveils a generic approach to exploit quantitative heteropeptide dimers for the design of supramolecular (bio)systems.

Self-assembly of berberine and a boron cluster for antibacterial regulation

B12H122− and BBR can quickly form rod-shaped particles in aqueous solution with enhanced reactive oxygen species (ROS) generation ability.

Multicharged Supramolecular Assembly Mediated by Polycationic Cyclodextrin for Efficiently Photodynamic Antibacteria

Supramolecular antimicrobial materials based on synthetic macrocycles have recently aroused enormous interests due to their controllable and effective antibacterial treatment. Herein, a multicharged supramolecular assembly was fabricated employing the moderate host-guest interaction between hexa-adamantane-appended ruthenium polypyridyl (Ru2) and polycationic cyclodextrin (CD-QAS) in water. The positively multicharged feature of supramolecular assembly could remarkably enhance the specific intercalation and accumulation in negatively charged bacteria membrane leading to the physical membrane damage. Subsequently, the assembly could efficiently initiate the significant generation of singlet oxygen (¹O₂) in situ when irradiated with white light thus exhibiting a highly efficient antibacterial capability. Significantly, antibacterial experiments indicated that Ru2/CD-QAS displayed less effect on suppressing the growth of E. coli only about 25% in the absence of light while they exhibited excellent killing efficiency more than 99% toward E. coli under light irradiation. This work provides a simple approach for constructing supramolecular antimicrobial materials for synergistic photodynamic antibacteria.

Functional Nanomaterials and 3D-Printable Nanocomposite Hydrogels for Enhanced Cell Proliferation and for the Reduction of Bacterial Biofilm Formation

Biomaterial-associated infections are a major cause of biomaterial implant failure. To prevent the initial attachment of bacteria to the implant surface, researchers have investigated various surface modification methods. However, most of these approaches also prevent the attachment, spread, and growth of mammalian cells, resulting in tissue integration failure. Therefore, the success of biomaterial implants requires an optimal balance between tissue integration (cell adhesion to biomaterial implants) and inhibition of bacterial colonization. In this regard, we synthesize bifunctional nanomaterials by functionalizing the pores and outer surfaces of periodic mesoporous organosilica (PMO) with antibacterial tetracycline (Tet) and antibacterial and cell-adhesive bipolymer poly-d-lysine (PDL), respectively. Then, the fabricated ^TetPMO-PDL nanomaterials are incorporated into alginate-based hydrogels to create injectable and 3D-printable nanocomposite (NC) hydrogels (AlgL-^TetPMO-PDL). These bifunctional nanomaterial and 3D-printable NC hydrogel show pH-dependent release of Tet over 7 days. They also enhance the proliferation of eukaryotic cells (fibroblasts). ^TetPMO-PDL is inactive in reducing Pseudomonas aeruginosa, Staphylococcus aureus, and Enterococcus faecalis biofilms. However, AlgL-^TetPMO-PDL shows significant antibiofilm activity against P. aeruginosa. These results suggest that the incorporation of ^TetPMO-PDL into AlgL may have a synergistic effect on the inhibition of the Gram-negative bacterial (P. aeruginosa) biofilm, while this has no effect on the reduction of the Gram-positive bacterial (S. aureus and E. faecalis) biofilm.

Cucurbit[8]uril-based supramolecular hydrogels for biomedical applications

As a member of the cucurbit[n]uril family (where n denotes the number of glycoluril units), cucurbit[8]uril (CB[8]) possesses a large cavity volume and is able to accommodate two guests simultaneously. Therefore, CB[8] has been adapted as a dynamic noncovalent crosslinker to form various supramolecular hydrogels. These CB[8]-based hydrogels have been investigated for various biomedical applications due to their good biocompatibility and dynamic properties afforded by host-guest interactions. In this review, we summarize the hydrogels that have been dynamically fabricated via supramolecular crosslinking of polymers by CB[8] reported during the past decade, and discuss their design principles, innovative applications in biomedical science and their future prospects.

Assessment of the Biocompatibility of Cucurbiturils in Blood Cells

Currently, cucurbiturils are being actively researched all over the world. Research is focused on the ways of improving the solubility and selectivity of cucurbiturils, increasing the stability of the complexes with other particles in various media and enhancing their ability to bind and release various substances. The most significant area of our research is the assessment of safety, studying the biological properties and synergistic effects of cucurbiturils during complexation with drugs. In this article, the hemocompatibility of erythrocytes and leukocytes with cucurbiturils was investigated. We demonstrated that cucurbiturils have no cytotoxic effect, even at high concentrations (1 mM) and do not affect the viability of PBMCs. However, cucurbiturils can increase the level of the early apoptosis of lymphocytes and cucurbit[7]uril enhances hemolysis in biologically relevant media. Despite this, cucurbiturils are fairly safe organic molecules in concentrations up to 0.3 mM. Thus, we believe that it will become possible to use polymer nanostructures as drug delivery systems in clinical practice, since cucurbiturils can be modified to improve pharmacological properties.

Selective recognition and determination of phenylalanine by a fluorescent probe based on cucurbit[8]uril and palmatine

This paper demonstrated a simple and validated fluorescence enhancing method to selectively recognize and discriminate the amino acid phenylalanine (Phe). ¹H NMR spectroscopy reveal that the palmatine (PAL) can be encapsulated into the cucurbit [8]uril (Q [8]) in aqueous solution to form stable 1:2 host-guest inclusion complex PAL₂@Q [8], which exhibits moderate intensity fluorescence property. Interestingly, the addition of the Phe into the inclusion complex PAL₂@Q [8] leads to dramatically enhancing of the fluorescence intensity. In contrast, the addition of any other natural amino acids into the inclusion complex PAL₂@Q [8] gives no fluorescence variation. Furthermore, it is easy to detect the concentration of Phe in target aqueous solution according to the linear relationship between fluorescence intensity and concentration of the Phe.

Self-assembling morphology-tunable single-component supramolecular antibiotics for enhanced antibacterial manipulation

This single-component supramolecular antibiotic can undergo reversible self-assembling morphology transitions under sequential ultrasonic and redox stimuli. The self-assemblies with different morphologies display effective antibacterial regulation.

Dual-cross-linked dynamic hydrogels with cucurbit[8]uril and imine linkages

The strategy of dual cross-linking was investigated by enhancing the performance of dynamic hydrogels. To this end, phenylalanine modified ε-polylysine was synthesized and employed as the polymer backbone of hydrogels. The phenylalanine moieties and amine groups of the polymer could be cross-linked with cucurbit[8]uril (CB[8]) and the dialdehyde cross-linker, respectively. Single CB[8] linkage with fast dynamics led to an increase in the viscosity of the polymer solution, and single imine linkage with slow dynamics led to the formation of weak and brittle hydrogels. However, the two linkages were combined together to form a dual-cross-linked hydrogel and the performance of the hydrogel could be well enhanced. Compared with the single imine cross-linked hydrogel, the dual-cross-linked hydrogel demonstrated a higher mechanical strength, better extensibility and faster self-healing rate. It is anticipated that this line of research could provide a useful method to enhance the performance of dynamic hydrogels.

Efficient thermal- and photocatalysts made of Au nanoparticles on MgAl-layered double hydroxides for energy and environmental applications

Composites of the noble metal Au supported on MgAl-LDHs were prepared by a simple impregnation-reduction method to be used as thermal- and photocatalysts for the photocatalytic degradation of ciprofloxacin and thermocatalytic decomposition of formic acid to produce hydrogen. A collection of techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) were employed to determine the structure and morphology properties of the as-prepared Au/MgAl-LDHs. The presence of surface Au(0) in Au/MgAl-LDHs was confirmed by TEM and XPS analyses. For the first time, we compared the effect of the surfactant PVP on the catalyst and found that the Au/MgAl-LDH composite with Au particle size of 2-8 nm had better catalytic activity than the (PVP@Au)/MgAl-LDH composite with Au particle size in the range of 1-5 nm. The sizes of Au NPs in the two catalysts were similar but had different effects on the catalytic performance. This indicated that the addition of PVP had an inhibitory effect on the catalytic activity of the catalyst. To evaluate the photostability of Au/MgAl-LDHs, recycle experiments for the photocatalytic degradation of ciprofloxacin were performed, and it was found that Au/MgAl-LDHs had good stability. Finally, we also applied Au/MgAl-LDHs in environmental catalysis and energy catalysis; we hope that they will be useful in practical applications.

Fabrication of nor-seco-cucurbit[10]uril based supramolecular polymers via self-sorting

A nor-seco-CB[10] (ns-CB[10]) based linear supramolecular polymer is firstly fabricated via self-sorting strategy. Through self-sorting of the monomer, ns-CB[10] and CB[7], the unfavorable factors for supramolecular polymerization are avoided. Therefore, supramolecular polymer with high molecular weight is successfully fabricated, and the molecular weight can be controllably regulated.

Aggregation-induced emission-based ionic liquids for bacterial killing, imaging, cell labeling, and bacterial detection in blood cells

A series of aggregation-induced emission (AIE)-based imidazolium-type ionic liquids (ILs) were designed and synthesized for bacterial killing and imaging, cell labeling, and bacterial detection in blood cells. The AIE-based ILs showed antibacterial activities against both Escherichia coli and Staphylococcus aureus. The carbon chain length of substitution at the N3 position of the imidazolium cations highly affects the antibacterial properties of ILs. Owing to their AIE characteristics, the ILs could selectively capture fluorescence image of dead bacteria while killing the bacteria. The fluorescence intensity varied with the concentration of bacteria, indicating that AIE-based ILs has potential as an antibacterial material and an efficient probe for bacterial viability assay. In addition, the synthesized AIE-based ILs exhibit relatively low cytotoxicity and hemolysis rate and therefore potential for cell labeling, as well as bacterial detection in blood cells. STATEMENT OF SIGNIFICANCE: Bacteria are ubiquitous, especially the pathogenic bacteria, which pose a serious threat to human health. There is an urgent need for materials with efficient antibacterial properties and biocompatibility and without causing drug resistance. In this work, we synthesized a series of aggregation-induced emission (AIE)-doped imidazolium type ionic liquids (ILs) with multifunction potential of bacterial killing and imaging, cell labeling, and detection of bacteria from blood cells. The synthesized AIE-based ILs can image dead bacteria at the same time of killing these bacteria, which can avoid the fluorescent dyeing process. Simultaneously, the fluorescent imaging of dead bacteria can be distinguished by the naked eye, and the fluorescence intensity from the AIE-based ILs varied with the concentration of bacteria. In addition, the AIE-based ILs exhibit relatively low cytotoxicity and hemolysis rate and therefore potential for cell labeling as well as detection of bacteria from red blood cell suspension.

Applications of Cucurbiturils in Medicinal Chemistry and Chemical Biology

The supramolecular chemistry of cucurbit[n]urils (CBn) has been rapidly developing to encompass diverse medicinal applications, including drug formulation and delivery, controlled drug release, and sensing for bioanalytical purposes. This is made possible by their unique recognition properties and very low cytotoxicity. In this review, we summarize the host-guest complexation of biologically important molecules with CBn, and highlight their implementation in medicinal chemistry and chemical biology.

Host-Guest Interactions Initiated Supramolecular Chitosan Nanogels for Selective Intracellular Drug Delivery

Polysaccharide-based nanogels have drawn considerable interest in pharmaceutics because of their superior biocompatibility and potential responsiveness to external stimuli, enabling specific drug release. During the fabrication of nanogels, however, covalent cross-linking often involves less friendly cross-linkers and traditionally employed noncovalent cross-linking often relies on weak interactions that may lead to premature payload release. Herein, we report host-guest chemistry-driven supramolecular chitosan nanogels (CNGs) that are responsive to either endogenous or exogenous stimuli, thus allowing selective drug release in specific cancer cells or disease sites. In an aqueous solution, two phenylalanine (Phe) units of Phe-grafted chitosan (CS-Phe) were encapsulated into one cavity of cucurbit[8]uril (CB[8]), driving cross-linking of CS-Phe and formation of CNGs. Doxorubicin hydrochloride (DOX), a chemotherapeutic agent, was entrapped in the matrix of CNGs during the formation of nanogels to yield DOX-CNGs with an excellent drug loading efficiency. The morphology and size of CNGs were fully assessed by transmission electron microscopy and dynamic light scattering. The encapsulated DOX was selectively liberated in the presence of competitive guests of CB[8], such as endogenous spermine (SPM) that is overexpressed by certain types of cancer cells or exogenous amantadine (ADA) that may be added into cells or tissues that require targeted treatment, either of which may replace Phe from the cavity of CB[8] resulting in the breakdown of the nanogels and payload release. The CNGs were efficiently internalized by cells, and the DOX-CNGs exhibited specific, potent activity against cancerous cells such as A549 cell line that is well known for SPM overexpression. This study reports that the first stimuli (competitive guest)-responsive host-guest interactions initiated supramolecular CNGs with excellent biocompatibility and selective therapeutic efficacy against cancer cells. It may provide new insights into the design and fabrication of novel stimuli-responsive payload delivery systems.

Host-guest interactions in nor-seco-cucurbit[10]uril: novel guest-dependent molecular recognition and stereoisomerism

The unique monomer and excimer fluorescence emissions of pyrene were first exploited as distinctly photophysical signals to identify the possible diastereomers of guests within nor-seco-cucurbit[10]uril (NS-CB[10]) cavities. Further experiments revealed that balancing the hydrophilic and hydrophobic effects of the guest in aqueous solution can improve the molecular recognition and binding ability of NS-CB[10].

Topological Aspects of the Design of Nanocarriers for Therapeutic Peptides and Proteins

Supramolecular chemistry holds great potential for the design of versatile and safe carriers for therapeutic proteins and peptides. Nanocarriers can be designed to meet specific criteria for given application (exact drug, administration route, target tissue, etc.). However, alterations in the topology of formulation components can drastically change their activity. This is why the supramolecular topology of therapeutic nanoconstructions has to be considered. Herein, we discuss several topological groups used for the design of nanoformulations for peptide and protein delivery: modification of polypeptide chains by host-guest interactions; packaging of proteins and peptides into liposomes; complexation and conjugation with dendrimers. Each topological type has its own advantages and disadvantages, so careful design of nanoformulations is needed. Ideally, each case where nanomedicine is needed requires a therapeutic construction specially created for that taking into account features of the administration route, target tissue, or organ, properties of a drug, its bioavailability, etc. The wide number of studies in the field of protein delivery by supramolecular and nanocarriers for proteins and peptides evidence their increasing potential for different aspects of the innovative medicine. Although significant progress has been achieved in the field, there are several remaining challenges to be overcome in future.

Supramolecular Antibacterial Materials for Combatting Antibiotic Resistance

Antibiotic-resistant bacteria have emerged as a severe threat to human health. As effective antibacterial therapies, supramolecular materials display unprecedented advantages because of the flexible and tunable nature of their noncovalent interactions with biomolecules and the ability to incorporate various active agents in their platforms. Herein, supramolecular antibacterial materials are discussed using a format that focuses on their fundamental active elements and on recent advances including material selection, fabrication methods, structural characterization, and activity performance.

Cucurbit[7]uril promoted Fenton oxidation by modulating the redox property of catalysts

The redox property of a ferrocene derivative is modulated by cucurbit[7]uril, thus accelerating the catalytic oxidation of dye chromophores.

Cucurbit[8]uril-Based Polymers and Polymer Materials

Cucurbit[8]uril (CB[8]) is unique and notable in the cucurbit[n]uril family, since it has a relatively large cavity and thus is able to simultaneously accommodate two guest molecules. Typically, an electron-deficient first guest and an electron-rich second guest can be bound by CB[8] to form a stable 1:1:1 heteroternary supramolecular complex. Additionally, two homo guests can also be strongly dimerized inside the cavity of CB[8] to form a 2:1 homoternary supramolecular complex. During the past decade, by combining polymer science and CB[8] host-guest chemistry, a variety of systems have been established to construct supramolecular polymers with polymer chains typically at the nanoscale/sub-microscale, and CB[8]-based micro/nanostructured polymer materials in the form of polymer networks and hydrogels, microcapsules, micelles, vesicles, and colloidal particles, normally in solution and occasionally on surfaces. This Review summarizes the noncovalent interactions and strategies used for the preparation of CB[8]-based polymers and polymer materials with a focus on the representative and latest developments, followed by a brief discussion of their characterization, properties, and applications.

Supramolecular Encapsulation and Bioactivity Modulation of a Halonium Ion by Cucurbit[ n]uril ( n = 7, 8)

This is the first time that cucurbit[7]uril and cucurbit[8]uril have been demonstrated to serve as synthetic receptors for a halonium guest species, diphenyleneiodonium, modulating its bioactivities and alleviating its cardiotoxicity, which further expands the onium family of guest molecules for the cucurbit[ n]uril family and provides new insights for halonium-cucurbit[ n]uril host-guest chemistry and its potential applications in pharmaceutical chemistry.

Mannose-Modificated Polyethylenimine: A Specific and Effective Antibacterial Agent against Escherichia coli

Polyethylenimine (PEI) has antimicrobial activity against Gram-positive (Staphylococcus aureus, S. aureus) and Gram-negative (Escherichia coli, E. coli), bacteria but is highly cytotoxic, and the selective antimicrobial activity against S. aureus is obviously better than that against E. coli. To reduce the cytotoxicity and improve the antibacterial activity against E. coli, we modified PEI with d-mannose through nucleophilic addition between primary amine and aldehyde groups to get mannose-modified polyethylenimine copolymer particles (Man-PEI CPs). The use of mannose may provide good targeting ability toward E. coli pili. The antibacterial activity of Man-PEI CPs was investigated. Man-PEI CPs shows specific and very strong killing capability against E. coli at a concentration of 10 μg/mL, which is the highest antimicrobial efficiency compared to that of unmodified PEI (220 μg/mL). The antibacterial mechanism demonstrated that the enhancement in antibacterial activity is due to specific recognition of the mannose and destroying the cell wall of the bacteria by PEIs. Importantly, the Man-PEI CPs show less cytotoxicity and excellent biocompatibility. The results indicate that Man-PEI CPs have great potential as novel antimicrobial materials to prevent bacterial infections and provide specific applications for killing E. coli.