Recent trends in electrochemiluminescence aptasensors and their applications

Exploring T7 RNA polymerase-assisted CRISPR/Cas13a amplification for the detection of BNP via electrochemiluminescence sensing platform

Brain natriuretic peptide (BNP) is considered to be an important biomarker of heart failure (HF) attracting attention. However, its low concentration and short half-life in blood lead to a low-sensitivity detection of BNP, which is a challenge that has to be overcome. In this work, we propose a highly specific, highly sensitive T7 RNA polymerase-assisted clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a system to detect BNP via an electrochemiluminescence (ECL) sensing platform and incorporate exonuclease III (Exo III)-hairpin and dumbbell-shaped hybridization chain reaction (HCR) technologies. In this detection scheme, the ECL sensing platform possesses low background signal and high sensitivity. Firstly, the T7 promoter-initiated T7 RNA polymerase acts as a signal amplification technique to generate large amounts of RNAs that can activate CRISPR/Cas13a activity. Secondly, CRISPR/Cas13a is able to trans-cleave the surrounding trigger strand to produce DNA1. Thirdly, DNA1 is involved in the co-amplification reaction of Exo III and hairpin DNA, which subsequently triggers a dumbbell-shaped HCR technology. Eventually, a large number of Ru (II) molecules are inserted into the interstitial space of the dumbbell-shaped HCR to generate a strong ECL signal. The CRISPR/Cas13a possesses outstanding specificity for a single base and increased sensitivity. The tightly conformed dumbbell-shaped HCR provides higher sensitivity than the traditional linear HCR amplification technique. Ultimately, the clever combination of several amplification reactions enables the limit of detection (LOD) as low as 3.2 fg/mL. It showed promise for clinical sample testing, with recovery rates ranging from 98.4% to 103% in 5% human serum samples. This detection method offered a valuable tool for early HF detection, emphasizing the synergy of amplification strategies and specificity conferred by CRISPR/Cas13a technology.

TiO2/Ag-based photodeposited catalyst boosted electrochemiluminescence of ninhydrin-hydrogen peroxide system for ultrasensitive sensing of copper (II)

Photodeposited TiO2/Ag nanocomposites were generally used to be a friendly catalyst for degrading organic contaminant in environmental field. However, electrochemiluminescence (ECL) sensing analysis based on photocatalysts remains a significant challenge. Herein, polyvinylimide (PEI)-TiO2/Ag nanocomposites (PEI-TiO2/AgNCPs) film with reduced graphene oxide(r-GO) was constructed as a sensing interface for copper(II) ECL detection. TiO2/Ag nanocomposites was prepared by reversed phase microemulsion method and photodeposition technique. Moreover, it was discovered that a small amount of Cu2+ could obviously boost the ECL signal of ninhydrin-hydrogen peroxide system. Signal amplification was achieved by using the synergistic effect between r-GO and TiO2/Ag nanocomposites, and the efficiently concentrated effect of PEI to Cu2+. Furthermore, the investigation showed that ECL mechanism of ninhydrin-hydrogen peroxide system was attributed to the generated hydroxyl radical and superoxide anion during the several type of reactions. Thus for the first time, an ultrasensitive ECL approach for detecting Cu2+ could be performed using ninhydrin as an ECL signal probe and hydrogen peroxide as a co-reaction reagent. Under the suitable circumstances, the proposed method showed an excellent linear relationship in the concentration range of Cu2+ from 1.0 fM to 5.0 nM. Detection limit was estimated to be as low as 0.26 fM. The sensing interface expanded the application of photodeposited TiO2/Ag nanocomposites in ultrasensitive ECL detection. It has potential applications in other components and biological analysis.

Aptasensors: employing molecular probes for precise medical diagnostics and drug monitoring

Accurate detection and monitoring of therapeutic drug levels are vital for effective patient care and treatment management. Aptamers, composed of single-stranded DNA or RNA molecules, are integral components of biosensors designed for both qualitative and quantitative detection of biological samples. Aptasensors play crucial roles in target identification, validation, detection of drug-target interactions and screening potential of drug candidates. This review focuses on the pivotal role of aptasensors in early disease detection, particularly in identifying biomarkers associated with various diseases such as cancer, infectious diseases and cardiovascular disorders. Aptasensors have demonstrated exceptional potential in enhancing disease diagnostics and monitoring therapeutic drug levels. Aptamer-based biosensors represent a transformative technology in the field of healthcare, enabling precise diagnostics, drug monitoring and disease detection.

Current Trends in Nanomaterials-Based Electrochemiluminescence Aptasensors for the Determination of Antibiotic Residues in Foodstuffs: A Comprehensive Review

Veterinary pharmaceuticals have been recently recognized as newly emerging environmental contaminants. Indeed, because of their uncontrolled or overused disposal, we are now facing undesirable amounts of these constituents in foodstuff and its related human health concerns. In this context, developing a well-organized environmental and foodstuff screening toward antibiotic levels is of paramount importance to ensure the safety of food products as well as human health. In this case, with the development and progress of electric/photo detecting, nanomaterials, and nucleic acid aptamer technology, their incorporation-driven evolving electrochemiluminescence aptasensing strategy has presented the hopeful potentials in identifying the residual amounts of different antibiotics toward sensitivity, economy, and practicality. In this context, we reviewed the up-to-date development of ECL aptasensors with aptamers as recognition elements and nanomaterials as the active elements for quantitative sensing the residual antibiotics in foodstuff and agriculture-related matrices, dissected the unavoidable challenges, and debated the upcoming prospects.

Nucleic acid aptamer-based biosensors and their application in thrombin analysis

Thrombin is a multifunctional serine protease that plays an important role in coagulation and anticoagulation processes. Aptamers have been widely applied in biosensors due to their high specificity, low cost and good biocompatibility. This review summarizes recent advances in thrombin quantification using aptamer-based biosensors. The primary focus is optical sensors and electrochemical sensors, along with their applications in thrombin analysis and disease diagnosis.

Guest Molecular Assembly Strategy in Covalent Organic Frameworks for Electrochemiluminescence Sensing of Uranyl

The application of covalent organic frameworks (COFs) in electrochemiluminescence (ECL) is promising in environmental monitoring. Developing an emerging design strategy to expand the class of COF-based ECL luminophores is highly desirable. Here, a COF-based host-guest system was constructed through guest molecular assembly to deal with nuclear contamination analysis. The efficient charge transport network was formed by inserting an electron-withdrawing guest tetracyanoquinodimethane (TCNQ) into the open space of the COF host (TP-TBDA; TP = 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and TBDA = 2,5-di(thiophen-2-yl)benzene-1,4-diamine) with an electron-donating property; the construction of the COF-based host-guest system (TP-TBDA@TCNQ) triggered the ECL emission of non-emitting TP-TBDA. Furthermore, the dense active sites in TP-TBDA were utilized to capture the target substance UO₂²⁺. The presence of UO₂²⁺ broke the charge-transfer effect in TP-TBDA@TCNQ, resulting in the weakening of the ECL signal, thus the established ECL system integrating the low detection limit with high selectivity monitors UO₂²⁺. This COF-based host-guest system provides a novel material platform for constructing late-model ECL luminophores and creates an opportunity for the vigorous ECL technology.

A Portable Microfluidic-Based Electrochemiluminescence Sensor for Trace Detection of Trenbolone in Natural Water

In this study, a portable electrochemiluminescence sensor chip was designed for trenbolone (TBE) trace detection in environmental water. First, a stable ECL signal was obtained with low-toxicity 3,4,9,10-perylenetetracarboxylic acid (PTCA) as a luminophore and persulfate (S₂O₈^2-) as a coreactant. Second, hollow-structured Cu₂MoS₄ was introduced as a coreaction accelerator to catalyze S₂O₈^2- reduction. The reversible conversion of the mixed-valence transition metal ions in Cu₂MoS₄ (Cu⁺/Cu²⁺ and Mo⁴⁺/Mo⁶⁺) greatly promoted the generation of the sulfate radical (SO₄^•-). Meanwhile, the special porous structure of Cu₂MoS₄ possessed a large specific surface area, thus enhancing its catalytic performance. Based on these enhancement mechanisms, a strong ECL signal was acquired, which improved the detection sensitivity of the constructed sensor. Importantly, a microfluidic chip was introduced for sensing detection, thereby improving the practicality of the sensor. The developed sensor chip was miniature and portable, exhibiting high sensitivity for TBE detection with a wide linear range (10 fg/mL-100 ng/mL) and lower detection limit (3.32 fg/mL). This was of great significance for timely and rapid analysis of steroid pollutants in natural water.

Highly Efficient PTCA/Co3O4/CuO/S2O82- Ternary Electrochemiluminescence System Combined with a Portable Chip for Bioanalysis

Herein, we reported an efficient electrochemiluminescence (ECL) biosensor chip for sensitive detection of neuron-specific enolase (NSE). First, 3,4,9,10-perylenetetracarboxylic acid with good luminescence characteristics was used as a luminophore to obtain a stable ECL signal. Subsequently, hollow porous Co₃O₄/CuO concave polyhedron nanocages (CPNCs) were designed as co-reaction promoters to amplify the luminescence signals for highly sensitive trace detection of NSE. In brief, the rapid cyclic conversion of Co³⁺/Co²⁺ and Cu²⁺/Cu⁺ redox pairs could continuously catalyze the reduction of persulfate (S₂O₈^2-), thus providing a large number of essential active intermediates (SO₄^•-) for ECL emission. Meanwhile, the unique structure of Co₃O₄/CuO CPNCs possessed a large specific surface area, which greatly improved its catalytic efficiency. Third, NKFRGKYKC was developed as an affinity ligand for specific antibody fixation, which improved incubation efficiency and protected bioactivity of antibodies. Finally, we independently designed a microchip and applied it for ECL detection to improve the practical application ability of the sensor. The developed biosensor exhibited good sensitivity with a wide linear range (10 fg/mL to 100 ng/mL) and a low detection limit (3.42 fg/mL), which played an active role in the clinical application of sensing analysis.

Graphene-Based Biosensors for Molecular Chronic Inflammatory Disease Biomarker Detection

Chronic inflammatory diseases, such as cancer, diabetes mellitus, stroke, ischemic heart diseases, neurodegenerative conditions, and COVID-19 have had a high number of deaths worldwide in recent years. The accurate detection of the biomarkers for chronic inflammatory diseases can significantly improve diagnosis, as well as therapy and clinical care in patients. Graphene derivative materials (GDMs), such as pristine graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO), have shown tremendous benefits for biosensing and in the development of novel biosensor devices. GDMs exhibit excellent chemical, electrical and mechanical properties, good biocompatibility, and the facility of surface modification for biomolecular recognition, opening new opportunities for simple, accurate, and sensitive detection of biomarkers. This review shows the recent advances, properties, and potentialities of GDMs for developing robust biosensors. We show the main electrochemical and optical-sensing methods based on GDMs, as well as their design and manufacture in order to integrate them into robust, wearable, remote, and smart biosensors devices. We also describe the current application of such methods and technologies for the biosensing of chronic disease biomarkers. We also describe the current application of such methods and technologies for the biosensing of chronic disease biomarkers with improved sensitivity, reaching limits of detection from the nano to atto range concentration.

Selection and Application of Aptamer Affinity for Protein Purification

Aptamers are affinity-based oligonucleotide ligands raised against a target molecule, which might be of proteic or other nature. Aptamers are developed by using a reiterative in vitro selection procedure, named SELEX, in which the target is exposed to a combinatorial oligonucleotide combinatorial library. Target bound oligonucleotides are eluted, and PCR amplified followed by the next SELEX round. The process is repeated until no further increase in target binding affinity and specificity is achieved. Selected aptamers are identified and immobilized for protein purification. In view of their stability against denaturation and capability of renaturation, low costs of production, easiness of modification and stabilization, oligonucleotide aptamers are excellent tools as high-affinity ligands for applications of protein purification.

Novel electrochemiluminescent assay for the aptamer-based detection of testosterone

This work presents a proof-of-concept assay for the detection and quantification of small molecules based on aptamer recognition and electrochemiluminescence (ECL) readout. The testosterone-binding (TESS.1) aptamer was used to demonstrate the novel methodology. Upon binding of the target, the TESS.1 aptamer is released from its complementary capture probe - previously immobilized at the surface of the electrode - producing a decrease in the ECL signal after a washing step removing the released (labeled) TESS.1 aptamer. The analytical capability of the ECL assay towards testosterone detection was investigated displaying a linear range from 0.39 to 1.56 μM with a limit of detection of 0.29 μM. The selectivity of the proposed assay was assessed by performing two different negative control experiments; i) detection of testosterone with a randomized ssDNA sequence and ii) detection of two other steroids, i.e. deoxycholic acid and hydrocortisone with the TESS.1 aptamer. In parallel, complementary analytical techniques were employed to confirm the suggested mechanism: i) native nano-electrospray ionization mass spectrometry (native nESI-MS) was used to determine the stoichiometry of the binding, and to characterize aptamer-target interactions; and, ii) isothermal titration calorimetry (ITC) was carried out to elucidate the dissociation constant (K_d) of the complex of testosterone and the TESS.1 aptamer. The combination of these techniques provided a complete understanding of the aptamer performance, the binding mechanism, affinity and selectivity. Furthermore, this important characterization carried out in parallel validates the real functionality of the aptamer (TESS.1) ensuring its use towards selective testosterone binding in further biosensors. This research will pave the way for the development of new aptamer-based assays coupled with ECL sensing for the detection of relevant small molecules.

Recent achievements and advances in optical and electrochemical aptasensing detection of ATP based on quantum dots

The design and fabrication of high sensitive and selective biosensing platforms areessential goals to precisely recognize biomaterials in biological assays. In particular, determination of adenosine triphosphate (ATP) as the main energy currency of the cells and one of the most important biomolecules in living organisms is a pressing need in advanced biological detection. Recently, aptamer-based biosensors are introduced as a new direct strategy in which the aptamers (Apts) directly bind to the different targets and detect them on the basis of conformational changes and physical interactions. They can also be conjugated to optical and electronic probes such as quantum dot (QD) nanomaterials and provide unique QD aptasensing platforms. Currently, these Apt-based biosensors with excellent recognition features have attracted extensive attention due to the high specificity, rapid response and facile construction. Therefore, in this review article, recent achievements and advances in aptasensing detection of ATP based on different detection methods and types of QDs are discussed. In this regard, the optical and electrochemical aptasensors have been categorized based on detection methods; fluorescence (FL), electrochemiluminescence (ECL) and photoelectrochemical (PEC) and they have been also divided to two main groups based on QDs; metal-based (M-based) and carbon-based (C-based) materials. Then, their advantages and limitations have been highlighted, compared and discussed in detail.

Recent applications of quantum dots in optical and electrochemical aptasensing detection of Lysozyme

Lysozyme (Lyz) is a naturally occurring enzyme that operates against Gram-positive bacteria and leads to cell death. This antimicrobial enzyme forms the part of the innate defense system of nearly all animals and exists in their somatic discharges such as milk, tears, saliva and urine. Increased Lyz level in serum is an important indication of several severe diseases and so, precise diagnosis of Lyz is an urgent need in biosensing assays. Up to know, various traditional and modern techniques have been introduced for Lyz determination. Although the traditional methods suffer from some significant limitations such as time-consuming, arduous, biochemical screening, bacterial colony isolation, selective enrichment and requiring sophisticated instrumentation or isotope labeling, some new modern approaches like aptamer-based biosensors (aptasensors) and quantum dot (QD) nanomaterials are the main goal in Lyz detection. Electrochemical and optical sensors have been highlighted because of their adaptability and capability to decrease the drawbacks of common methods. Using an aptamer-based biosensor, sensor selectivity is enhanced due to the specific recognition of the analyte. Thereby, in this review article, the recent advances and achievements in electrochemical and optical aptasensing detection of Lyz based on different QD nanomaterials and detection methods have been discussed in detail.

A ratiometric electrochemiluminescent cytosensor based on polyaniline hydrogel electrodes in spatially separated electrochemiluminescent systems

Here, we proposed a ratiometric electrochemiluminescent (ECL) strategy in spatially multiplied ECL systems. By the specific recognition of hyaluronic acid with proteoglycan CD44 and epidermal growth factor with epidermal growth factor receptor on the cell surface, the cells were labelled with potential-resolved ECL probes, namely Ru(bpy)₃²⁺ and g-C₃N₄, respectively. The as-proposed cytosensor provides a multichannel ECL protocol to improve the throughput, which may push the application of ECL for the cellular immunoanalysis.

Advances in electrochemiluminescence co-reaction accelerator and its analytical applications

Electrochemiluminescence (ECL) can be produced through two main routes: annihilation route and coreactant route. The vast majority of applications of ECL are based on coreactant ECL which can be generated in aqueous media at relatively low potentials compared with organic solvents. However, the development of more efficient ECL systems remains a compelling goal. Co-reaction accelerator (CRA) can significantly enhance the ECL signal through promoting more production of the coreactant intermediate. Compared with other ECL enhancement strategies, the CRA protocol is distinctive owing to its diverse, simple, and highly effective features. Various species such as inorganic compound, organic compound, and nanomaterials (NMs) have been developed as CRA and NM CRA has gained particular attention owing to their unique properties of excellent catalytic behavior and large surface area. By integration with the inherent advantages of ECL, bioanalysis based on CRA-enhanced ECL showed excellent performance such as ultrahigh sensitivity, wide dynamic range, low cost, simple instrumentation, and measurements in complex media. It has been extensively applied in various fields including clinical diagnosis, environmental monitoring, and food safety. Therefore, it is of great interest to present a systematic and critical review on the advances in ECL CRA. Herein, the recent progress on CRA and its applications in ECL bioanalysis are summarized by illustrating some representative work and a discussion of the future development trends of CRA ECL is offered.

Highly Reproducible and Sensitive Electrochemiluminescence Biosensors for HPV Detection Based on Bovine Serum Albumin Carrier Platforms and Hyperbranched Rolling Circle Amplification

Most DNA-based electrochemiluminescence (ECL) biosensors are established through the self-assembly of thiolated single-stranded DNA (ssDNA) probes on the Au electrode surface. Because of this random assembly process, a significant discrepancy exists in the distribution of a modified DNA film on different electrodes, which greatly affects the reproducibility of a biosensor. In this study, a porous bovine serum albumin (BSA) layer was first modified on the electrode surface, which can improve the position distribution and spatial orientation of the self-assembly ssDNA probe. It was then coupled with hyperbranched rolling circle amplification to develop the high-reproducibility-and-sensitivity ECL biosensor for human papillomavirus 16 E6 and E7 oncogene detection. In the presence of the target DNA, the surface of the electrode accumulates abundant amplified products through reaction, which contain double-stranded DNA (dsDNA) fragments of different lengths, followed by plentiful dichlorotris (1,10-phenanthroline) ruthenium(II) hydrate (Ru(phen)₃²⁺, acting as an ECL indicator) insertion into grooves of dsDNA fragments, and a strong signal can be detected. There is a linear relationship between the signal and the target concentration range from 10 fM to 15 pM, and the detection limit is 7.6 fM (S/N = 3). After the BSA modification step, the relative standard deviation was reduced from 9.20 to 3.96%, thereby achieving good reproducibility. The proposed ECL strategy provides a new method for constructing high-reproducibility-and-sensitivity ECL biosensors.

Electrochemiluminescent biosensor for ultrasensitive detection of lymphoma at the early stage using CD20 markers as B cell-specific antigens

Herein, by taking advantage of the special binding of an aptamer to the membrane surface of a B cell and accumulation of the positive charges of a nanocomposite, including luminol-chitosan-platinum nanoparticles (L-Cs-Pt NPs), on the negatively charge of the aptamer phosphate backbone, a sensitive, simple, selective and rapid strategy for the detection of lymphoma cells by a new label-free electrogenerated chemiluminescence (ECL) aptasensor has been introduced. With increasing concentrations of B lymphoma cells, the nanocomposite detaches from the aptamer, leading to a decrease in the ECL of a luminol and H₂O₂ system. With high loading of luminol and Pt NPs on a chitosan, together with the electrocatalytic effect of Pt NPs, enhanced sensitive detection of cancer cells with a limit of detection of 31 cells/mL was achieved. Step-by-step modification and biosensor response to cancer cells was monitored by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and ECL. The aptasensor exhibited excellent specificity for lymphoma cells vs breast cancer (MCF-7) and human embryonic kidney (HEK293) cell lines as potential interferents. Finally, the performance of the aptasensor in blood samples was assessed against a commercial flow cytometric method. Satisfactory results confirmed the applicability of the proposed biosensing platform.

A ratiometric electrochemiluminescence resonance energy transfer platform based on novel dye BODIPY derivatives for sensitive detection of lactoferrin

A ratiometric electrochemiluminescence resonance energy transfer (ECL-RET) platform depended on novel dye BODIPY derivatives was proposed for rapid detection of lactoferrin. This ECL-RET platform is composed of aptamer decorated BODIPY composites and C₆₀@BSA, in which BODIPY derivative is the ECL probe and can generate significant resonance energy transfer with K₂S₂O₈. BODIPY derivative and K₂S₂O₈ are used as built-in reference signal and calibration signal respectively to eliminate background signal and abnormal change signal by double signal self-calibration process. At the same time, C₆₀, as the accelerator of K₂S₂O₈, can effectively increase the ECL signal and further transfer as much energy as possible to BODIPY derivative. Under optimal conditions, the constructed ECL-RET platform exhibited sensitive detection of lactoferrin in the wide linear range of 10^-4- 850 ng/mL with a LOD of 42 fg/mL. Meanwhile, the proposed ECL-RET aptasensor demonstrated superior stability, specificity and reproducibility, displaying favorable application value in practical diagnosis of this method.

Advances in Exosome Analysis Methods with an Emphasis on Electrochemistry

Exosomes, small extracellular vesicles, are released by various cell types. They are found in bodily fluids, including blood, urine, serum, and saliva, and play essential roles in intercellular communication. Exosomes contain various biomarkers, such as nucleic acids and proteins, that reflect the status of their parent cells. Since they influence tumorigenesis and metastasis in cancer patients, exosomes are excellent noninvasive potential indicators for early cancer detection. Aptamers with specific binding properties have distinct advantages over antibodies, making them effective versatile bioreceptors for the detection of exosome biomarkers. Here, we review various aptamer-based exosome detection approaches based on signaling methods, such as fluorescence, colorimetry, and chemiluminescence, focusing on electrochemical strategies that are easier, cost-effective, and more sensitive than others. Further, we discuss the clinical applications of electrochemical exosome analysis strategies as well as future research directions in this field.

Aptamer-based biosensor for detecting carcinoembryonic antigen

Carcinoembryonic antigen (CEA), as one of the common tumor markers, is a human glycoprotein involved in cell adhesion and is expressed during human fetal development. Since the birth of human, CEA expression is largely inhibited, with only low levels in the plasma of healthy adults. Generally, CEA will overexpressed in many cancers, including gastric, breast, ovarian, lung, and pancreatic cancers, especially colorectal cancer. As one of the important tumor markers, the detection of CEA has great significance in differential diagnosis, condition monitoring and therapeutic evaluation of diseases. Conventional CEA testing typically uses immunoassay methods. However, immunoassay methods require complex and expensive instruments and professional personnel to operate. Moreover, radioactive element may cause certain damage to the human body, which limits their wide application. In the past few years, biosensors, especially aptamer-based biosensors, have attracted extensive attention due to their high sensitivity, good selectivity, high accuracy, fast response and low cost. This review briefly classifies and describes the advance in optical and electrochemical aptamer biosensors for CEA detection, also explains and compares their advantages and disadvantages.

Electrogenerated Chemiluminescence Biosensing

This Feature simply introduces the history and mechanism of classical electrogenerated chemiluminescence (ECL) systems for the detection of biomolecules, highlights new advances and emerging fields of the ECL biosensing with recent illustrative examples, and presents the challenges and perspectives of ECL biosensing.

Polymerization nicking-triggered LAMP cascades enable exceptional signal amplification for aptamer-based label-free detection of trace proteins in human serum

Detecting molecular biomarkers in high sensitivity plays an important role in the diagnosis of various diseases at the early stage. Here, by combining the target-induced polymerization nicking reaction (TIPNR) with the loop-mediated isothermal amplification (LAMP), we describe an ultrasensitive and label-free aptamer-based sensing method for detecting low levels of proteins in human serum by using thrombin as the model target analyte. The target thrombin binds and causes spontaneous assembly of two distinct aptamer probes to form the templates for the polymerization nicking reaction recycling amplification to produce many forward inner primer sequences. Subsequently, downstream LAMP reactions are initiated by these sequences for the generation of tremendous DNA hairpins with various lengths via automated cyclic strand displacement reactions. The SYBR Green I organic dye further binds the many hairpins to show drastically amplified fluorescence for ultrasensitive detection of thrombin down to 3.6 fM in the linear range from 0.01 pM to 10 nM. Such a sensing method based on aptamers has high discrimination capability for the target molecules against other non-specific proteins and is applicable for diluted serum samples. With the successful demonstration of the substantial signal amplification ability and simplicity feature of this assay approach, highly sensitive and convenient detection of other disease biomarkers with this method can be envisioned in the near future.

A conceptual framework for the development of iridium(iii) complex-based electrogenerated chemiluminescence labels

Translation of the highly promising electrogenerated chemiluminescence (ECL) properties of Ir(iii) complexes (with tri-n-propylamine (TPrA) as a co-reactant) into a new generation of ECL labels for ligand binding assays necessitates the introduction of functionality suitable for bioconjugation. Modification of the ligands, however, can affect not only the photophysical and electrochemical properties of the complex, but also the reaction pathways available to generate light. Through a combined theoretical and experimental study, we reveal the limitations of conventional approaches to the design of electrochemiluminophores and introduce a new class of ECL label, [Ir(C^N)2(pt-TOxT-Sq)]+ (where C^N is a range of possible cyclometalating ligands, and pt-TOxT-Sq is a pyridyltriazole ligand with trioxatridecane chain and squarate amide ethyl ester), which outperformed commercial Ir(iii) complex labels in two commonly used assay formats. Predicted limits on the redox potentials and emission wavelengths of Ir(iii) complexes capable of generating ECL via the dominant pathway applicable in microbead supported ECL assays were experimentally verified by measuring the ECL intensities of the parent luminophores at different applied potentials, and comparing the ECL responses for the corresponding labels under assay conditions. This study provides a framework to tailor ECL labels for specific assay conditions and a fundamental understanding of the ECL pathways that will underpin exploration of new luminophores and co-reactants.

Triple-helix molecular switch-based versatile "off-on" electrochemiluminescence and fluorescence biosensing platform for ultrasensitive detection of lipopolysaccharide by multiple-amplification strategy

Herein, a novel biosensing platform for versatile electrochemiluminescence (ECL) "off" and fluorescence (FL) "on" detection of lipopolysaccharide (LPS) with multiple-amplification strategy is proposed. The specific recognition of target to aptamer on the magnetic beads (MB) firstly released abundant DNA sequences of three kinds. The sequences hybridized with multifunctional molecular beacon (MMB) and initiated numerous bidirectional polymerization and shearing reactions, generating a large number of DNA fragments (a1) by multiple cycling amplification. Then a1 was introduced to the triple-helix sensing system, opening the triple-helix structure. In ECL system, the G-rich chains S2 were exposed to form G-quadruplex-hemin complex in the presence of hemin, which could efficiently quench ECL for "off" detection of LPS. In FL system, the fluorophore FAM and quencher BHQ on S1 chain were separated with opening of triple-helix structure, achieving fluorescence "on" signal for LPS assay. So the versatile platform can achieve greatly amplified ECL and FL signal changes for sensitive assay of LPS, showing wide linear ranges (0.1 fg/mL-0.1 ng/mL by ECL and 10 fg/mL^-1-1 μg/mL by FL) and low detection limits (0.012 fg/mL by ECL and 1.269 fg/mL by FL). Therefore, the present ECL "Off" and FL "On" dual-signal detection patterns for LPS displayed many advantages over other reported methods, which provided an outlook for future applications in clinical diagnosis.

Coordination-induced structural changes of DNA-based optical and electrochemical sensors for metal ions detection

Metal ions play a critical role in human health and abnormal levels are closely related to various diseases. Therefore, the detection of metal ions with high selectivity, sensitivity and accuracy is particularly important. This article highlights and comments on the coordination-induced structural changes of DNA-based optical, electrochemical and optical-electrochemical-combined sensors for metal ions detection. Challenges and potential solutions of DNA-based sensors for the simultaneous detection of multiple metal ions are also discussed for further development and exploitation.

Enhanced electrochemiluminescent brightness and stability of porphyrins by supramolecular pinning and pinching for sensitive zinc detection

Ultrasensitive electrochemiluminescence (ECL) detection can benefit substantially from the rational configuration of emitter-enhancer stereochemistry. Here, using zinc(II) meso-5,10,15,20-tetra(4-sulfonatophenyl)porphyrin (ZnTSPP) as a model, we demonstrate that both the ECL intensity and the photostability of this emitter were significantly improved when it was trapped in pyridyl-bridged β-cyclodextrin dimer (Py(CD)₂); a synthetic enhancer that is ECL inactive. Through NMR characterization, we confirmed that ZnTSPP formed a clam-like inclusion complex involving pinning and pinching forces from the biocompatible container Py(CD)₂. Up to a threefold increase in the ECL brightness of ZnTSPP was witnessed when it was encapsulated in β-CD. Absorption and emission spectroscopic data revealed that both the extended excitation lifetime and the restricted mobility of the guest contributed to the observed improvement in signal transduction within the host molecule. This bioinspired entrapment also led to a marked boost in ECL stability. With the aid of the newly identified coreactant H₂O₂, the hollow TSPP@Py(CD)₂ system was employed to create a Zn²⁺-selective probe that was capable of sensitive and accurate zinc detection. The observed increase in ECL conversion and enhanced photophysical properties of this compact supramolecular assembly render it a novel template for enhancing ECL in analytical applications. Graphical abstract ᅟ.

Electrochemiluminescent detection of Escherichia coli O157:H7 based on Ru(bpy)3 2+/ZnO nanorod arrays

Foodborne pathogens are perpetual threats to human and animal health. Detection of pathogens requires accurate, sensitive, rapid and point-of-care diagnostic assays. In this study, we described a simple and sensitive electrochemiluminescent (ECL) assay to detect the deadly bacteria Escherichia coli O157:H7 by [Formula: see text]-coated ZnO nanorods arrays (NAs). The [Formula: see text]-coated ZnO NAs were fabricated by immobilizing [Formula: see text] on ZnO NAs with a large specific surface area and good conductivity. An [Formula: see text]-2-(dibutylamino)-ethanol (DBAE) system coated on ZnO NAs exhibits high ECL intensity, rapid response and good stability. This system was further developed as an ECL immunosensor used in the detection of E. coli O157:H7. The proposed ECL immunosensor exhibits a broad detection range within the scope of 200-100 000 CFU ml^-1 and quite a low detection limit of 143 CFU ml^-1. The high specificity, remarkable reproducibility and good stability offer a sensitive, selective, and convenient pathway for detecting E. coli O157:H7 in the field of food safety and clinical diagnosis.

‘Cathodic’ electrochemiluminescence of [Ru(bpy)3]2+ and tri-n-propylamine confirmed as emission at the counter electrode

Monitoring emission and potentials at both the working and counter electrodes provides new insight into a proposed cathodic electrochemiluminescence system.

A versatile signal-enhanced ECL sensing platform based on molecular imprinting technique via PET-RAFT cross-linking polymerization using bifunctional ruthenium complex as both catalyst and sensing probes

Molecularly imprinted technique (MIT) has proven to be a significant tool in the analyzing area in virtue of its obvious advantages such as specific recognition, favorable stability to high temperature and higher sensitivity. Electrochemiluminescence (ECL) technology has also been receiving enormous attention as a powerful tool in sensing fields. However, sensors based on the combination of MIT and ECL technologies have seldom been reported yet. Herein, we find that Ru(bpy)₃²⁺ cannot only work as an efficient catalyst for photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, but also as a sensing probe for ECL sensor. Based on this, we successfully construct ECL sensors via the combination of MIT and ECL techniques. In details, poly(methacrylic acid) (PMAA) and cross-linked PMAA were synthesized first via a well-controlled PET-RAFT polymerization using Ru(bpy)₃²⁺ as catalyst under illumination of visible light with a wavelength of 460 nm, as confirmed by ¹H NMR and gel permeation chromatography (GPC). Then, negatively-charged Au nanoparticles (AuNPs) with average sizes of 20 nm were prepared and modified with Ru(bpy)₃²⁺ via electrostatic incorporation. MIPs were prepared on the surface of AuNPs using melamine (MEL) as the template via PET-RAFT controlled cross-linking polymerization. The MIPs modified AuNPs (AuNPs-MIPs) were then fixed on the surface of working electrode with Nafion to achieve a solid-state ECL sensing platform employing Ru(bpy)₃²⁺ as the ECL probes. The as-prepared sensor showed a wide detection range of 5.0 × 10^-13 - 5.0 × 10^-6 mol/L and a low detection limit of 1.0 × 10^-13 mol/L (S/N ≥ 3) was reached in the detection of MEL. Moreover, further tests for analyzing MEL structural analogues proved that the constructed ECL sensing platform could be utilized to detect various substances via specific recognitions.

Graphitic C3N4 nanosheet and hemin/G-quadruplex DNAzyme-based label-free chemiluminescence aptasensing for biomarkers

Here we first reported that graphitic carbon nitride nanosheet (g-C₃N₄ NS) could effectively quench the chemiluminescence (CL) of luminol-hydrogen peroxide (H₂O₂) system. According to the new discovery, a label-free and homogeneous CL aptasensing platform was designed for sensitive detecting of biomarkers. In the absence of target, DNA probe containing hemin/G-quadruplex DNAzyme structure was adsorbed on the surface of g-C₃N₄ NS, causing the CL quenching of luminol through an electron transfer process. However, in the presence of the target, a DNA-DNA duplex was formed due to DNA hybridization reaction and target recognition effect, which could not be adsorbed onto the g-C₃N₄ NS surface because of its weak affinity. Thus, the electron transfer was blocked and the CL emission of luminol could be enhanced. The proposed CL aptasensor could detect carcinoembryonic antigen (CEA) with a detection limit of 63.0 pg/mL and it can also be used as a general detecting strategy for adenosinetriphosphate (ATP) detection. This aptasensing platform exhibited high sensitivity toward biomarkers and the probe need not be labeled, showing great promise for disease diagnosis.

Label-free determination of adenosine and mercury ions according to force mapping-based force-to-color variety

Single molecule force spectroscopy based on atomic force microscopy (AFM) is a simple and sensitive technique to probe molecular recognition forces. Here we demonstrate that visual color-intensity analysis of single molecule force mapping (SMFM) can be employed as a quick and convenient force-to-color detection towards the presence of various dissolved analytes in very low concentrations. To achieve this aim, analyte-specific single-strand DNA aptamers are first bound to an AFM tip. The measured forces between the functionalized tip and a suitable substrate, namely either a clean surface or a surface functionalized with the complementary DNA oligomer, change when a critical concentration of the analyte is reached. The current SMFM-based visual biosensing shows improved developments like higher sensitivity, lower detection limits, quicker detection, and much simple readout. The color of the obtained force maps reveals the force intensity, which gives a highly selective and immediate visual force-to-color response towards the presence of adenosine (above ∼0.1 nM) and Hg²⁺ (∼10 pM). The strategies shown in this work will be helpful to design and fabricate aptasensors for biomedical analysis as well as to understand the molecular interactions between DNA hybridization.

Target-programmed and autonomous proximity binding aptasensor for amplified electronic detection of thrombin

The development of sensitive and simple approaches capable of monitoring trace amounts of protein biomarkers is appealing for disease diagnosis and treatment. Towards this end, we have developed an electrochemical sensing platform for sensitive and simple detection of protein biomarkers by using thrombin as the model target molecules via a target-programmed proximity binding amplification approach. The binding of thrombin to the aptamer sequences in the partial dsDNA duplex probes induces the release of the ssDNA trigger strands, which catalyze subsequent assembly formation of many methylene blue (MB)-tagged proximate DNA motifs with the presence of the DNA fuel strands through cascaded toehold-mediated strand displacement reactions. Due to the proximity-binding effect, these MB-tagged proximate DNA motifs anneal with the capture probes on the sensor surface with significantly enhanced stability against the corresponding single component counterpart, thereby pulling the MB tags close to the sensor surface and generating substantially amplified signal responses for sensitive determination of thrombin down to 23.6 pM. In addition, such aptasensor can specifically discriminate thrombin from other interference proteins, and can also be utilized to monitor thrombin in diluted serum samples, demonstrating its great potential for sensitive determination of proteins for early disease diagnosis.

Comparison against current standards of a DNA aptamer for the label-free quantification of tobramycin in human sera employed for therapeutic drug monitoring

The use of DNA aptamers in biosensors for the quantification of pharmaceuticals in the clinics would help to overcome the limitations of antibody-based detection for small molecules. The interest for such systems is proven by the ever-increasing number of aptamer-based solutions for analytics proposed in the literature as proof-of-concept demonstrators. Despite such diversity, these platforms often lack a comparative assessment of their performances against the current standard of practice in the clinics when using real samples. We employed an aptamer against tobramycin discovered in our laboratory to quantify through surface plasmon resonance the concentration of the antibiotic in clinical samples obtained from patients treated with tobramycin and undergoing therapeutic drug monitoring. We then compared the performances of our detection strategy against the current standard of practice. Our results show how, using adequate calibration and matrix complexity reduction, DNA aptamer-based direct assays can assess clinically relevant concentrations of small molecules in patient serum and with good correlation to current standards used in the clinics.

Bifunctional aptasensor based on novel two-dimensional nanocomposite of MoS2 quantum dots and g-C3N4 nanosheets decorated with chitosan-stabilized Au nanoparticles for selectively detecting prostate specific antigen

A novel nanostructured biosensing platform was designed based on two-dimensional (2D) nanocomposite of graphitic carbon nitride (g-C₃N₄) nanosheets and MoS₂ quantum dots (MoS₂ QDs), followed by decoration with chitosan-stabilized Au nanoparticles (CS-AuNPs) (denoted as MoS₂QDs@g-C₃N₄@CS-AuNPs), of which CS-AuNPs were prepared by plasma enhanced-chemical vapor deposition. Owning to the good surface plasmon performance of the CS-AuNPs and excellent electrochemical activity of MoS₂QDs@g-C₃N₄ nanosheets, the as-obtained 2D MoS₂QDs@g-C₃N₄@CS-AuNPs nanocomposite was simultaneously explored to construct both surface plasmon resonance spectroscopy (SPR) sensor and electrochemical aptasensor. The MoS₂QDs@g-C₃N₄@CS-AuNPs-based aptasensor shows strong bio-binding affinity toward the prostate specific antigen (PSA) targeted aptamer strands as compared to the individual component, including MoS₂ QDs, g-C₃N₄, and CS-AuNPs. When detecting PSA, the low limit of detection (LOD) of 0.71 pg mL^-1 deduced by electrochemical aptasensor is three orders of magnitude lower than that deduced by SPR sensor (0.77 ng mL^-1). As expected, both SPR sensor and electrochemical aptasensor demonstrate good selectivity, highly stability, acceptable reproducibility, and well consistent applicability in human serum. The satisfactory results suggest potential application of the MoS₂QDs@g-C₃N₄@CS-AuNPs in bifunctional biosensing fields and clinical monitoring of cancer markers.

Aptamer affinity ligands in protein chromatography

The present review deals with the place of single chain oligonucleotide ligands (aptamers) in affinity chromatography applied to proteins. Aptamers are not the only affinity ligands available but they represent an emerging and highly promising route that advantageously competes with antibodies in immunopurification processes. A historical background of affinity chromatography from the beginning of the discipline to the most recent outcomes is first presented. Then the focus is centered on aptamers which represent the last step so far to the long quest for affinity ligands associating very high specificity, availability and strong stability against most harsh cleaning agents required in chromatography. Then technologies of ligand selection from large libraries followed by the most appropriate chemical grafting approaches are described and supported by a number of bibliographic references. Experimental results assembled from relevant published paper are reported; they are selected by their practical applicability and potential use at large scale. The review concludes with specific remarks and future developments that are expected in the near future to turn this technology into a large acceptance for preparative applications.

Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens

Nanomaterial-based sensing approaches that incorporate different types of nanoparticles (NPs) and nanostructures in conjunction with natural or synthetic receptors as molecular recognition elements provide opportunities for the design of sensitive and selective assays for rapid detection of contaminants. This review summarizes recent advancements over the past ten years in the development of nanotechnology-enabled sensors and systems for capture and detection of pathogens. The most common types of nanostructures and NPs, their modification with receptor molecules and integration to produce viable sensing systems with biorecognition, amplification and signal readout are discussed. Examples of all-in-one systems that combine multifunctional properties for capture, separation, inactivation and detection are also provided. Current trends in the development of low-cost instrumentation for rapid assessment of food contamination are discussed as well as challenges for practical implementation and directions for future research.