Nanoparticles of nucleotide-free analogue of vitamin B12 formed in protein nanocarriers and their neuroprotective activity in vivo

Recently, we have described the first supermolecular nanoentities of vitamin B12 derivative, viz. monocyano form of heptabutyl cobyrinate, unique nanoparticles with strong noncovalent intermolecular interactions, emerging optical and catalytic properties. Their nearest analogue, heptamethyl cobyrinate (ACCby), exhibits bioactivity. Here, we demonstrate the first example of the formation of nanoparticles of this nucleotide-free analogue of vitamin B12 in protein nanocarriers and neuroprotective activity in vivo of the own nanoform of the drug. The preparation and characterization of nanocarriers based on bovine serum albumin (BSA) loaded with vitamin B12 (viz. cyano- and aquacobalamins) and ACCby were performed. Nucleotide-free analogue of vitamin B12 is tightly retained by the protein structure and exists in an incorporated state in the form of nanoparticles. The effect of encapsulated drugs on the character and severity of primary generalized seizures in rats induced by the pharmacotoxicant thiosemicarbazide was studied. Cyanocobalamin and ACCby exhibited a neuroprotective effect. The best influence of the encapsulation on the effectiveness of the drugs was achieved in the case of AСCby, whose bioavailability as a neuroprotector did not change upon introduction in BSA particles, i.e., 33 % of surviving animals were observed upon ACCby administration in free form and in encapsulated state. No surviving rats were observed without the administration of drugs. Thus, BSA nanocarriers loaded by nanoparticles of nucleotide-free analogues of vitamin B12, including hydrophobic ones, can be recommended for neuroprotection and targeted delivery.

Lateral nanoarchitectonics from nano to life: ongoing challenges in interfacial chemical science

Lateral nanoarchitectonics is a method of precisely designing functional materials from atoms, molecules, and nanomaterials (so-called nanounits) in two-dimensional (2D) space using knowledge of nanotechnology. Similar strategies can be seen in biological systems; in particular, biological membranes ingeniously arrange and organise functional units within a single layer of units to create powerful systems for photosynthesis or signal transduction and others. When our major lateral nanoarchitectural approaches such as layer-by-layer (LbL) assembly and Langmuir-Blodgett (LB) films are compared with biological membranes, one finds that lateral nanoarchitectonics has potential to become a powerful tool for designing advanced functional nanoscale systems; however, it is still rather not well-developed with a great deal of unexplored possibilities. Based on such a discussion, this review article examines the current status of lateral nanoarchitectonics from the perspective of in-plane functional structure organisation at different scales. These include the extension of functions at the molecular level by on-surface synthesis, monolayers at the air-water interface, 2D molecular patterning, supramolecular polymers, macroscopic manipulation and functionality of molecular machines, among others. In many systems, we have found that while the targets are very attractive, the research is still in its infancy, and many challenges remain. Therefore, it is important to look at the big picture from different perspectives in such a comprehensive review. This review article will provide such an opportunity and help us set a direction for lateral nanotechnology toward more advanced functional organization.

Toward Ultrathin: Advances in Solution-Processed Organic Semiconductor Transistors

In recent years, organic semiconductor (OSC) ultrathin films and their solution-processed organic field-effect transistors (OFETs) have garnered attention for their high flexibility, light weight, solution processability, and tunable optoelectronic properties. These features make them promising candidates for next-generation optoelectronic applications. An ultrathin film typically refers to a film thickness of less than 10 nm, i.e., several molecular layers, which poses challenges for OSC materials and solution-processed methods. In this paper, first we introduce the carrier-transport regulation mechanism under ultrathin limits. Second, we summarize various solution-processed techniques for OSC ultrathin films and elucidate advances in their OFETs performance, such as enhanced or maintained mobilities, improved switching ratios, reduced threshold voltages, and minimized contact resistance. The relationship between the ultrathin-film thickness, microstructure of various OSCs (small molecules and polymers), and device performance is discussed. Third, we explore the recent application of OSC ultrathin-film-based OFETs, such as gas sensors, biosensors, photodetectors, and ferroelectric OFETs (Fe-OFETs). Finally, the conclusion is drawn, and the challenges and prospects of ultrathin OSC transistors are presented. Nowadays, research on ultrathin films is still in its early stages; further experience in precise film deposition control is crucial to advancing research and broadening the scope of applications for OSC ultrathin devices.

Molecular machines working at interfaces: physics, chemistry, evolution and nanoarchitectonics

As a post-nanotechnology concept, nanoarchitectonics combines nanotechnology with advanced materials science. Molecular machines made by assembling molecular units and their organizational bodies are also products of nanoarchitectonics. They can be regarded as the smallest functional materials. Originally, studies on molecular machines analyzed the average properties of objects dispersed in solution by spectroscopic methods. Researchers' playgrounds partially shifted to solid interfaces, because high-resolution observation of molecular machines is usually done on solid interfaces under high vacuum and cryogenic conditions. Additionally, to ensure the practical applicability of molecular machines, operation under ambient conditions is necessary. The latter conditions are met in dynamic interfacial environments such as the surface of water at room temperature. According to these backgrounds, this review summarizes the trends of molecular machines that continue to evolve under the concept of nanoarchitectonics in interfacial environments. Some recent examples of molecular machines in solution are briefly introduced first, which is followed by an overview of studies of molecular machines and similar supramolecular structures in various interfacial environments. The interfacial environments are classified into (i) solid interfaces, (ii) liquid interfaces, and (iii) various material and biological interfaces. Molecular machines are expanding their activities from the static environment of a solid interface to the more dynamic environment of a liquid interface. Molecular machines change their field of activity while maintaining their basic functions and induce the accumulation of individual molecular machines into macroscopic physical properties molecular machines through macroscopic mechanical motions can be employed to control molecular machines. Moreover, research on molecular machines is not limited to solid and liquid interfaces; interfaces with living organisms are also crucial.

Supermolecular Nanoentities of Vitamin B12 Derivative as a Link in the Evolution of the Parent Molecules During Self-Assembly at the Air-Water Interface

Nanoarchitectures with promising properties have now been formed from many important biomolecules. However, the preparation of nanoparticles of vitamin B₁₂ and its derivatives remains an ongoing research challenge. This paper describes the formation of supermolecular nanoentities (SMEs) of vitamin B₁₂ derivatives, unique nanoparticles with strong noncovalent intermolecular interactions, emerging properties, and activity. These were created by a nanoarchitectonic approach using directed assembly of layers at the air-water interface as a link in the chain of evolution of the parent molecules under specially created conditions. Such layers can be represented as a nanocosm, where, at a critical density, the assemblies act as nanoreactors in which the transformation of the original material occurs. The discovered SMEs not only replicate the functioning of vitamin B₁₂ assemblies with proteins in living organisms and act as vitamin B₁₂-depended enzymes but also demonstrate important advantages over vitamin B₁₂. They are more efficient in oxygen reduction/evolution reactions and in transformation into other forms. These SMEs, in performing advanced tasks, are an alternative to widely used materials based on noble metals for catalysis, medicine, and environment protection. Our findings open new perspectives both for the fabrication of novel SMEs of biomolecules and for a better understanding of the evolution of biomolecules in nature.

Materials nanoarchitectonics in a two-dimensional world within a nanoscale distance from the liquid phase

Promoted understanding of nanotechnology has enabled the construction of functional materials with nanoscale-regulated structures. Accordingly, materials science requires one-step further innovation by coupling nanotechnology with the other materials sciences. As a post-nanotechnology concept, nanoarchitectonics has recently been proposed. It is a methodology to architect functional material systems using atomic, molecular, and nanomaterial unit-components. One of the attractive methodologies would be to develop nanoarchitectonics in a defined dimensional environment with certain dynamism, such as liquid interfaces. However, nanoarchitectonics at liquid interfaces has not been fully explored because of difficulties in direct observations and evaluations with high-resolutions. This unsatisfied situation in the nanoscale understanding of liquid interfaces may keep liquid interfaces as unexplored and attractive frontiers in nanotechnology and nanoarchitectonics. Research efforts related to materials nanoarchitectonics on liquid interfaces have been continuously made. As exemplified in this review paper, a wide range of materials can be organized and functionalized on liquid interfaces, including organic molecules, inorganic nanomaterials, hybrids, organic semiconductor thin films, proteins, and stem cells. Two-dimensional nanocarbon sheets have been fabricated by molecular reactions at dynamically moving interfaces, and metal-organic frameworks and covalent organic frameworks have been fabricated by specific interactions and reactions at liquid interfaces. Therefore, functions such as sensors, devices, energy-related applications, and cell control are being explored. In fact, the potential for the nanoarchitectonics of functional materials in two-dimensional nanospaces at liquid surfaces is sufficiently high. On the basis of these backgrounds, this short review article describes recent approaches to materials nanoarchitectonics in a liquid-based two-dimensional world, i.e., interfacial regions within a nanoscale distance from the liquid phase.

Nanoarchitectonics for Analytical Science at Interfaces and with Supramolecular Nanostructures

For materials development with high-level structural regulations, the emerging concept of nanoarchitectonics has been proposed. Analytical sciences, including sensing/detection, sensors, and related device construction, are active targets of the nanoarchitectonics approach. This review article focuses on the two features of interface and nanostructures are especially focused to discuss nanoarchitectonics for analytical science. Especially, two selected topics, (i) analyses on molecular sensing at interfaces and (ii) sensors using self-assembled supramolecular nanostructures, are exemplified in this review article. In addition to recent general examples, specific molecular recognition at the air-water interface and fabrication of sensing materials upon self-assembly of fullerene units are discussed. Descriptions of these examples indicate that nanoarchitectonics and analytical science share common benefits, and therefore, developments in both research fields should lead to synergies.

100 °C-Langmuir-Blodgett Method for Fabricating Highly Oriented, Ultrathin Films of Polymeric Semiconductors

The Langmuir-Blodgett (LB) and Langmuir-Schaefer techniques facilitate thermodynamic favorability at an air-water interface, at which nanoscale molecular aggregations can be manipulated by micrometer- or millimeter-scale mechanics. The customary use of an aqueous subphase has limitations in the available temperature and spread materials. We present a general strategy to replace the aqueous subphase with an inert, low-vapor-pressure liquid, ethylene glycol. As a representative spread material that requires high-temperature processes, a semicrystalline polymeric semiconductor was investigated. We successfully demonstrated that the polymeric semiconductor spreads homogeneously across the entire surface of ethylene glycol heated to 100 °C using an LB trough, and spontaneously forms multilayers. Comprehensive studies such as X-ray diffraction, optical spectroscopy, and charge transport measurements revealed that barrier compression of solid-state polymer thin films during a high-temperature LB process produced uniaxial alignment of the polymer main chain with an averaged dichroic ratio of about 8, by which the electron transport concomitantly became highly anisotropic. The LB method presented in this work could be used to deposit thin films under ultimate environments, e.g., below 0 °C or above 100 °C, minimizing the effects of the vapor pressure of the subphase.

Molecular recognition at the air-water interface: nanoarchitectonic design and physicochemical understanding

Although molecular recognition at the air-water interface has been researched for over 30 years, investigations on its fundamental aspects are still active research targets in current science. In this perspective article, developments and future possibilities of molecular recognition at the air-water interface from pioneering research efforts to current examples are overviewed especially from the physico-chemical viewpoints. Significant enhancements of binding constants for molecular recognition are actually observed at the air-water interface although molecular interactions such as hydrogen bonding are usually suppressed in aqueous media. Recent advanced analytical strategies for direct characterization of interfacial molecules also confirmed the promoted formation of hydrogen bonding at the air-water interfaces. Traditional quantum chemical approaches indicate that modulation of electronic distributions through effects from low-dielectric phases would be the origin of enhanced molecular interactions at the air-water interface. Further theoretical considerations suggest that unusual potential changes for enhanced molecular interactions are available only within a limited range from the interface. These results would be related with molecular recognition in biomolecular systems that is similarly supported by promoted molecular interactions in interfacial environments such as cell membranes, surfaces of protein interiors, and macromolecular interfaces.

Helicity Manipulation of a Double-Paddled Binaphthyl in a Two-Dimensional Matrix Field at the Air-Water Interface

Molecular behavior and functionality are affected by their prevailing immediate environment. Molecular machines function according to conformational variations and have been studied largely in solution states. In order to access more highly complex functional molecular machines, it is necessary to analyze and control them in various environments. We have designed and synthesized a bisbinaphthyldurene (BBD) molecule that has two binaphthyl groups connected through a central durene moiety, allowing for the formation of several conformers. In density functional theory (DFT) calculations, BBD has five major conformers, denoted anti-1/anti-2/syn-1/syn-2/flat. It has been demonstrated that BBD exhibits different conformations in solution (anti-1 and syn-1) than on a gold surface (syn dimer and flat). In this work, the ratio of BBD conformations has been controlled in mixed monolayers with several different lipids at an air-water interface in order to compare conformational activity under different conditions. The conformations of BBD in transferred films obtained by using Langmuir-Blodgett techniques were estimated from circular dichroism spectra and DFT calculations. It has been found that the conformation of BBD in the mixed monolayer depends on its aggregated state, which has been controlled here by the mechanical properties and miscibility. In mixed monolayers with "hard" lipids having less miscibility with BBD as well as in cast film, BBD is self-aggregated and mostly forms stable anti-1 and syn-1 conformations, while unstable anti-2 and syn-2 conformers dominated in the more dispersed states involving "soft" lipids, which show good miscibility with BBD. Conformational changes in BBD are due to the formation of different aggregated states in each mixed monolayer according to the miscibility. Overall, BBD molecular conformations (and the resulting spectra) could be tuned by controlling the environment whether in solution, on a solid substrate, or in an admixture with lipids at the air-water interface.

Supramolecular Chiral Nanoarchitectonics

Exploration of molecular functions and material properties based on the control of chirality would be a scientifically elegant approach. Here, the fabrication and function of chiral-featured materials from both chiral and achiral components using a supramolecular nanoarchitectonics concept are discussed. The contents are classified in to three topics: i) chiral nanoarchitectonics of rather general molecular assemblies; ii) chiral nanoarchitectonics of metal-organic frameworks (MOFs); iii) chiral nanoarchitectonics in liquid crystals. MOF structures are based on nanoscopically well-defined coordinations, while mesoscopic orientations of liquid-crystalline phases are often flexibly altered. Discussion on the effects and features in these representative materials systems with totally different natures reveals the universal importance of supramolecular chiral nanoarchitectonics. Amplification of chiral molecular information from molecules to materials-level structures and the creation of chirality from achiral components upon temporal statistic fluctuations are universal, regardless of the nature of the assemblies. These features are thus surely advantageous characteristics for a wide range of applications.

Nanoarchitectonics beyond Self-Assembly: Challenges to Create Bio-Like Hierarchic Organization

Incorporation of non-equilibrium actions in the sequence of self-assembly processes would be an effective means to establish bio-like high functionality hierarchical assemblies. As a novel methodology beyond self-assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio-process, has been applied to this strategy. The application of non-equilibrium factors to conventional self-assembly processes is discussed on the basis of examples of directed assembly, Langmuir-Blodgett assembly, and layer-by-layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio-active components such as proteins or by the combination of bio-components and two-dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self-assembly for creation of bio-like higher functionalities and hierarchical structural organization.

Don't Forget Langmuir-Blodgett Films 2020: Interfacial Nanoarchitectonics with Molecules, Materials, and Living Objects

Designing interfacial structures with nanoscale (or molecular) components is one of the important tasks in the nanoarchitectonics concept. In particular, the Langmuir-Blodgett (LB) method can become a promising and powerful strategy in interfacial nanoarchitectonics. From this viewpoint, the status of LB films in 2020 will be discussed in this feature article. After one section on the basics of interfacial nanoarchitectonics with the LB technique, various recent research examples of LB films are introduced according to classifications of (i) growing research, (ii) emerging research, and (iii) future research. In recent LB research, various materials other than traditional lipids and typical amphiphiles can be used as film components of the LB techniques. Two-dimensional materials, supramolecular structures such as metal organic frameworks, and biomaterials such as DNA origami pieces are capable of working as functional components in the LB assemblies. Possible working areas of the LB methods would cover emerging demands, including energy, environmental, and biomedical applications with a wide range of functional materials. In addition, forefront research such as molecular manipulation and cell fate control is conducted in LB-related interfacial science. The LB technique is a traditional and well-develop methodology for molecular films with a ca. 100 year history. However, there is plenty of room at the interfaces, as shown in LB research examples described in this feature article. It is hoped that the continuous development of the science and technology of the LB method make this technique an unforgettable methodology.

2D Nanoarchitectonics: Soft Interfacial Media as Playgrounds for Microobjects, Molecular Machines, and Living Cells

Soft and flexible two-dimensional (2D) systems, such as liquid interfaces, would have much more potentials in dynamic regulation on nano-macro connected functions. In this Minireview article, we focus especially on dynamic motional functions at liquid dynamic interfaces as 2D material systems. Several recent examples are selected to be explained for overviewing features and importance of dynamic soft interfaces in a wide range of action systems. The exemplified research systems are mainly classified into three categories: (i) control of microobjects with motional regulations; (ii) control of molecular machines with functions of target discrimination and optical outputs; (iii) control of living cells including molecular machine functions at cell membranes and cell/biomolecular behaviors at liquid interface. Sciences on soft 2D media with motional freedom and their nanoarchitectonics constructions will have increased importance in future technology in addition to popular rigid solid 2D materials.

Nanoarchitectonics from Atom to Life

Functional materials with rational organization cannot be directly created only by nanotechnology-related top-down approaches. For this purpose, a novel research paradigm next to nanotechnology has to be established to create functional materials on the basis of deep nanotechnology knowledge. This task can be assigned to an emerging concept, nanoarchitectonics. In the nanoarchitectonics approaches, functional materials were architected through combination of atom/molecular manipulation, organic chemical synthesis, self-assembly and related spontaneous processes, field-applied assembly, micro/nano fabrications, and bio-related processes. In this short review article, nanoarchitectonics-related approaches on materials fabrications and functions are exemplified from atom-scale to living creature level. Based on their features, unsolved problems for future developments of the nanoarchitectonics concept are finally discussed.

Emission Control by Molecular Manipulation of Double-Paddled Binuclear PtII Complexes at the Air-Water Interface

Molecular functions depend on conformations and motions of the corresponding molecular species. An air-water interface is a suitable asymmetric field for the control of molecular conformations and motions under a small applied force. In this work, double-paddled binuclear Pt^II complexes containing pyrazole rings linked by alkyl spacers were synthesized and their orientations and emission properties dynamically manipulated at the air-water interface. The complexes emerge from water with concurrent variation of interface orientation of the planes of the Pt^II complexes from perpendicular to parallel during mechanical compression suggesting a unique 'submarine emission'. Phosphorescence of the complexes is quenched at the air-water interface prior to monolayer formation with intensities subsequently rapidly increasing during monolayer compression. These results indicate that asymmetric reactions and motions might be controlled by applying mechanical force at the air-water interface.

Molecular architectonics of DNA for functional nanoarchitectures

DNA is the key biomolecule central to almost all processes in living organisms. The eccentric idea of utilizing DNA as a material building block in molecular and structural engineering led to the creation of numerous molecular-assembly systems and materials at the nanoscale. The molecular structure of DNA is believed to have evolved over billions of years, with structure and stability optimizations that allow life forms to sustain through the storage and transmission of genetic information with fidelity. The nanoscale structural characteristics of DNA (2 nm thickness and ca. 40-50 nm persistence length) have inspired the creation of numerous functional patterns and architectures through noncovalent conventional and unconventional base pairings as well as through mutual templating-interactions with small organic molecules and metal ions. The recent advancements in structural DNA nanotechnology allowed researchers to design new DNA-based functional materials with chemical and biological properties distinct from their parent components. The modulation of structural and functional properties of hybrid DNA ensembles of small functional molecules (SFMs) and short oligonucleotides by adapting the principles of molecular architectonics enabled the creation of novel DNA nanoarchitectures with potential applications, which has been termed as templated DNA nanotechnology or functional DNA nanoarchitectonics. This review highlights the molecular architectonics-guided design principles and applications of the derived DNA nanoarchitectures. The advantages and ability of functional DNA nanoarchitectonics to overcome the trivial drawbacks of classical DNA nanotechnology to fulfill realistic and practical applications are highlighted, and an outlook on future developments is presented.

Monitoring Fluorescence Response of Amphiphilic Flapping Molecules in Compressed Monolayers at the Air-Water Interface

The air-water interface, which is the boundary of two phases with a large difference in polarity, gives a distinct environment compared with bulk water or air. Since the interface provides a field for various biomolecules to work, it is important to understand the molecular behaviors at the interface. Here, polarity-independent flapping viscosity probes (FLAP) equipped with hydrophobic/hydrophilic substituents have been synthesized and studied at the air-water interface. In situ fluorescence (FL), which is related to the internal motion and orientation, of three different FLAPs were investigated at the interface, and the internal motion of the molecule was indicated to be suppressed at the interface. In addition, the molecular response was compared with that of conventional viscosity probes (molecular rotors), which indicates the different behaviors of FLAP probably due to the distinct molecular orientation as well as molecular motion.

Layer-by-Layer Assembly: Recent Progress from Layered Assemblies to Layered Nanoarchitectonics

As an emerging concept for the development of new materials with nanoscale features, nanoarchitectonics has received significant recent attention. Among the various approaches that have been developed in this area, the fixed-direction construction of functional materials, such as layered fabrication, offers a helpful starting point to demonstrate the huge potential of nanoarchitectonics. In particular, the combination of nanoarchitectonics with layer-by-layer (LbL) assembly and a large degree of freedom in component availability and technical applicability would offer significant benefits to the fabrication of functional materials. In this Minireview, recent progress in LbL assembly is briefly summarized. After introducing the basics of LbL assembly, recent advances in LbL research are discussed, categorized according to physical, chemical, and biological innovations, along with the fabrication of hierarchical structures. Examples of LbL assemblies with graphene oxide are also described to demonstrate the broad applicability of LbL assembly, even with a fixed material.

Carbon nanodot-based heterostructures for improving the charge separation and the photocurrent generation

The possibility to employ carbon nanodots (CNDs) in solar devices was exploited by combining them with a fulleropyrrolidine derivative (FP2). The interaction between the two species was promoted by the presence of opposite electrostatic charges on CNDs (negatively charged) and FP2 (positively charged). The supramolecular dyad CNDs/FP2 generation was induced at the air/water interface of a Langmuir trough: water soluble CNDs were dissolved in the subphase and FP2 chloroform solution was spread on the subphase; the electrostatic interaction promoted the formation of the supramolecular adduct FP2/CNDs, which was then transferred onto solid substrates. Photo-induced charge transfer was promoted in the FP2/CNDs dyad and we demonstrated that the presence of CNDs increased the short-circuit current density, under light illumination, of a porphyrin-FP2/CNDs thin film by about 300% when compared with a more traditional porphyrin-FP2 solar device.

Langmuir Nanoarchitectonics from Basic to Frontier

Methodology to combine nanotechnology and these organization processes has been proposed as a novel concept of nanoarchitectonics, which can fabricate functional materials with nanolevel units. As an instant nanoarchitectonics approach, confining systems within a two-dimensional plane to drastically reduce translational motion freedom can be regarded as one of the rational approaches. Supramolecular chemistry and nanofabrication and their related functions at the air-water interface with the concept of nanoarchitectonics would lead to the creation of a novel methodology of Langmuir nanoarchitectonics. In this feature article, we briefly summarize research efforts related to Langmuir nanoarchitectonics including the basics for anomalies in molecular interactions such as highly enhanced molecular recognition capabilities. It is also extended to frontiers including the fabrication of supramolecular receptors and two-dimensional patterns with subnanometer-scale structural regulation, manual control of molecular machines and receptors by hand-motion-like macroscopic actions, and the regulation of cell fates at nanoarchitected arrays of nanocarbon assemblies and at direct liquid interfaces.

Dynamic Control of Intramolecular Rotation by Tuning the Surrounding Two-Dimensional Matrix Field

The intramolecular rotation of 4-farnesyloxyphenyl-4,4-difluoro-4-bora-3a,4a-diaza- s-indacene (BODIPY-ISO) was controlled by tuning its local physical environment within a mixed self-assembled monolayer at an air-water interface. Intramolecular rotation was investigated by considering the twisted intramolecular charge transfer (TICT) fluorescence of BODIPY-ISO, which increases in intensity with increasing viscosity of the medium. In situ fluorescence spectroscopy was performed on mixed monolayers of BODIPY-ISO with several different lipids at the air-water interface during in-plane compression of the monolayers. Depending on the identity of the lipid used, the fluorescence of the mixed monolayers could be enhanced by mechanical compression, indicating that the rotation of BODIPY-ISO can be controlled dynamically in mixtures with lipids dispersed at the air-water interface. Taken together, our findings provide insight into strategies for controlling the dynamic behavior of molecular machines involving mechanical stimuli at interfaces.

Self-assembly as a key player for materials nanoarchitectonics

The development of science and technology of advanced materials using nanoscale units can be conducted by a novel concept involving combination of nanotechnology methodology with various research disciplines, especially supramolecular chemistry. The novel concept is called 'nanoarchitectonics' where self-assembly processes are crucial in many cases involving a wide range of component materials. This review of self-assembly processes re-examines recent progress in materials nanoarchitectonics. It is composed of three main sections: (1) the first short section describes typical examples of self-assembly research to outline the matters discussed in this review; (2) the second section summarizes self-assemblies at interfaces from general viewpoints; and (3) the final section is focused on self-assembly processes at interfaces. The examples presented demonstrate the strikingly wide range of possibilities and future potential of self-assembly processes and their important contribution to materials nanoarchitectonics. The research examples described in this review cover variously structured objects including molecular machines, molecular receptors, molecular pliers, molecular rotors, nanoparticles, nanosheets, nanotubes, nanowires, nanoflakes, nanocubes, nanodisks, nanoring, block copolymers, hyperbranched polymers, supramolecular polymers, supramolecular gels, liquid crystals, Langmuir monolayers, Langmuir-Blodgett films, self-assembled monolayers, thin films, layer-by-layer structures, breath figure motif structures, two-dimensional molecular patterns, fullerene crystals, metal-organic frameworks, coordination polymers, coordination capsules, porous carbon spheres, mesoporous materials, polynuclear catalysts, DNA origamis, transmembrane channels, peptide conjugates, and vesicles, as well as functional materials for sensing, surface-enhanced Raman spectroscopy, photovoltaics, charge transport, excitation energy transfer, light-harvesting, photocatalysts, field effect transistors, logic gates, organic semiconductors, thin-film-based devices, drug delivery, cell culture, supramolecular differentiation, molecular recognition, molecular tuning, and hand-operating (hand-operated) nanotechnology.

Review of advanced sensor devices employing nanoarchitectonics concepts

Many recent advances in sensor technology have been possible due to nanotechnological advancements together with contributions from other research fields. Such interdisciplinary collaborations fit well with the emerging concept of nanoarchitectonics, which is a novel conceptual methodology to engineer functional materials and systems from nanoscale units through the fusion of nanotechnology with other research fields, including organic chemistry, supramolecular chemistry, materials science and biology. In this review article, we discuss recent advancements in sensor devices and sensor materials that take advantage of advanced nanoarchitectonics concepts for improved performance. In the first part, recent progress on sensor systems are roughly classified according to the sensor targets, such as chemical substances, physical conditions, and biological phenomena. In the following sections, advancements in various nanoarchitectonic motifs, including nanoporous structures, ultrathin films, and interfacial effects for improved sensor function are discussed to realize the importance of nanoarchitectonic structures. Many of these examples show that advancements in sensor technology are no longer limited by progress in microfabrication and nanofabrication of device structures - opening a new avenue for highly engineered, high performing sensor systems through the application of nanoarchitectonics concepts.

A silver-nanoparticle/cellulose-nanofiber composite as a highly effective substrate for surface-enhanced Raman spectroscopy

A highly active surface-enhanced Raman scattering (SERS) substrate was developed by facile deposition of silver nanoparticles onto cellulose fibers of ordinary laboratory filter paper. This was achieved by means of the silver mirror reaction in a manner to control both the size of the silver nanoparticles and the silver density of the substrate. This paper-based substrate is composed of a particle-on-fiber structure with the unique three-dimensional network morphology of the cellulose matrix. For such a SERS substrate with optimized size of the silver nanoparticles (ca. 70 nm) and loading density of silver (17.28 wt %), a remarkable detection limit down to the sub-attomolar (1 × 10^-16 M) level and an enhancement factor of 3 × 10⁶ were achieved by using Rhodamine 6G as the analyte. Moreover, this substrate was applied to monitor the molecular recognition through multiple hydrogen bonds in between nucleosides of adenosine and thymidine. This low-cost, highly sensitive, and biocompatible paper-based SERS substrate holds considerable potentials for the detection and analyses of chemical and biomolecular species.

Materials nanoarchitectonics at two-dimensional liquid interfaces

Much attention has been paid to the synthesis of low-dimensional materials from small units such as functional molecules. Bottom-up approaches to create new low-dimensional materials with various functional units can be realized with the emerging concept of nanoarchitectonics. In this review article, we overview recent research progresses on materials nanoarchitectonics at two-dimensional liquid interfaces, which are dimensionally restricted media with some freedoms of molecular motion. Specific characteristics of molecular interactions and functions at liquid interfaces are briefly explained in the first parts. The following sections overview several topics on materials nanoarchitectonics at liquid interfaces, such as the preparation of two-dimensional metal-organic frameworks and covalent organic frameworks, and the fabrication of low-dimensional and specifically structured nanocarbons and their assemblies at liquid-liquid interfaces. Finally, interfacial nanoarchitectonics of biomaterials including the regulation of orientation and differentiation of living cells are explained. In the recent examples described in this review, various materials such as molecular machines, molecular receptors, block-copolymer, DNA origami, nanocarbon, phages, and stem cells were assembled at liquid interfaces by using various useful techniques. This review overviews techniques such as conventional Langmuir-Blodgett method, vortex Langmuir-Blodgett method, liquid-liquid interfacial precipitation, instructed assembly, and layer-by-layer assembly to give low-dimensional materials including nanowires, nanowhiskers, nanosheets, cubic objects, molecular patterns, supramolecular polymers, metal-organic frameworks and covalent organic frameworks. The nanoarchitecture materials can be used for various applications such as molecular recognition, sensors, photodetectors, supercapacitors, supramolecular differentiation, enzyme reactors, cell differentiation control, and hemodialysis.

Unique supramolecular assembly through Langmuir - Blodgett (LB) technique

The Langmuir-Blodgett (LB) technique is a way of making supra-molecular assembly in ultrathin films with a controlled layered structure and crystal parameter, which have many envisioned technological applications for optical and molecular electronic devices as well as signal processing and transformation. Probably LB technique is the best method to manipulate materials at molecular level and provides a scope to realize the molecular electronics in reality. In this review article, we have discussed about the general introduction of LB technique and recent development on LB and related system including (i) LB methodology, (ii) characterizations of LB films, (iii) LB films and molecular electronics, (iv) historical review of LB films, (v) research and applications including fundamental research and application towards devices.

Performance Comparison of Three Chemical Vapor Deposited Aminosilanes in Peptide Synthesis: Effects of Silane on Peptide Stability and Purity

Silicon oxide substrates underwent gas-phase functionalization with various aminosilanes, and the resulting surfaces were evaluated for their suitability as a solid support for solid phase peptide synthesis (SPPS). APTES (3-aminopropyltriethoxysilane), APDEMS (3-aminopropyldiethoxymethylsilane), and APDIPES (3-aminopropyldiisopropylethoxysilane) were individually applied to thermal oxide-terminated silicon substrates via gas-phase deposition. Coated surfaces were characterized by spectroscopic ellipsometry (SE), contact angle goniometry, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and spectrophotometry. Model oligopeptides with 16 residues were synthesized on the amino surfaces, and the chemical stabilities of the resulting surfaces were evaluated against a stringent side chain deprotection (SCD) step, which contained trifluoroacetic acid (TFA) and trifluoromethanesulfonic acid (TFMSA). Functionalized surface thickness loss during SCD was most acute for APDIPES and the observed relative stability order was APTES > APDEMS > APDIPES. Amino surfaces were evaluated for compatibility with stepwise peptide synthesis where complete deprotection and coupling cycles are paramount. Model trimer syntheses indicated that routine capping of unreacted amines with acetic anhydride significantly increased purity as measured by MALDI-MS. An inverse correlation between the amine loading density and peptide purity was observed. In general, peptide purity was highest for the lowest amine density APDIPES surface.

Nanoarchitectonic-Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure-level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio-related interaction analyses, materials for environmental remediation, non-precious metal catalysts, and facile separation for biomedical uses.

Tetrathiafulvalene - a redox-switchable building block to control motion in mechanically interlocked molecules

With the rise of artificial molecular machines, control of motion on the nanoscale has become a major contemporary research challenge. Tetrathiafulvalenes (TTFs) are one of the most versatile and widely used molecular redox switches to generate and control molecular motion. TTF can easily be implemented as functional unit into molecular and supramolecular structures and can be reversibly oxidized to a stable radical cation or dication. For over 20 years, TTFs have been key building blocks for the construction of redox-switchable mechanically interlocked molecules (MIMs) and their electrochemical operation has been thoroughly investigated. In this review, we provide an introduction into the field of TTF-based MIMs and their applications. A brief historical overview and a selection of important examples from the past until now are given. Furthermore, we will highlight our latest research on TTF-based rotaxanes.

Materials Nanoarchitectonics for Mechanical Tools in Chemical and Biological Sensing

In this Focus Review, nanoarchitectonic approaches for mechanical-action-based chemical and biological sensors are briefly discussed. In particular, recent examples of piezoelectric devices, such as quartz crystal microbalances (QCM and QCM-D) and a membrane-type surface stress sensor (MSS), are introduced. Sensors need well-designed nanostructured sensing materials for the sensitive and selective detection of specific targets. Nanoarchitectonic approaches for sensing materials, such as mesoporous materials, 2D materials, fullerene assemblies, supported lipid bilayers, and layer-by-layer assemblies, are highlighted. Based on these sensing approaches, examples of bioanalytical applications are presented for toxic gas detection, cell membrane interactions, label-free biomolecular assays, anticancer drug evaluation, complement activation-related multiprotein membrane attack complexes, and daily biodiagnosis, which are partially supported by data analysis, such as machine learning and principal component analysis.

Carbon Nanosheets by Morphology-Retained Carbonization of Two-Dimensional Assembled Anisotropic Carbon Nanorings

Two-dimensional (2D) carbon nanomaterials possessing promising physical and chemical properties find applications in high-performance energy storage devices and catalysts. However, large-scale fabrication of 2D carbon nanostructures is based on a few specific carbon templates or precursors and poses a formidable challenge. Now a new bottom-up method for carbon nanosheet fabrication using a newly designed anisotropic carbon nanoring molecule, CPPhen, is presented. CPPhen was self-assembled at a dynamic air-water interface with a vortex motion to afford molecular nanosheets, which were then carbonized under inert gas flow. Their nanosheet morphologies were retained after carbonization, which has never been seen for low-molecular weight compounds. Furthermore, adding pyridine as a nitrogen dopant in the self-assembly step successfully afforded nitrogen-doped carbon nanosheets containing mainly pyridinic nitrogen species.

Nano Trek Beyond: Driving Nanocars/Molecular Machines at Interfaces

In 2016, the Nobel Prize in Chemistry was awarded for pioneering work on molecular machines. Half a year later, in Toulouse, the first molecular car race, a "nanocar race", was held by using the tip of a scanning tunneling microscope as an electrical remote control. In this Focus Review, we discuss the current state-of-the-art in research on molecular machines at interfaces. In the first section, we briefly explain the science behind the nanocar race, followed by a selection of recent examples of controlling molecules on surfaces. Finally, motion synchronization and the functions of molecular machines at liquid interfaces are discussed. This new concept of molecular tuning at interfaces is also introduced as a method for the continuous modification and optimization of molecular structure for target functions.

Solid state vibrational circular dichroism towards molecular recognition: chiral metal complexes intercalated in a clay mineral

The solid state VCD method revealed chirality effects on the intermolecular interaction between Δ- or Λ-[Ru(phen)₃]²⁺ and R or S-BINOL intercalated in a montmorillonite clay.

Membrane adaptation limitations inEnterococcus faecalisunderlie sensitivity and the inability to develop significant resistance to conjugated oligoelectrolytes

COEs are emerging antimicrobials to combat drug resistant infections and to which bacteria develop only limited resistance.

Stereoselective interactions as manifested by vibrational circular dichroism spectra: the interplay between chiral metal complexes co-adsorbed in a montmorillonite clay

Solid state VCD is applied for intercalated metal complexes.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones.