Transport and accumulation of plasma generated species in aqueous solution

Plasma-liquid interactions in the presence of organic matter-A perspective

As investigations in the biomedical applications of plasma advance, a demand for describing safe and efficacious delivery of plasma is emerging. It is quite clear that not all plasmas are "equal" for all applications. This Perspective discusses limitations of the existing parameters used to define plasma in context of the need for the "right plasma" at the "right dose" for each "disease system." The validity of results extrapolated from in vitro studies to preclinical and clinical applications is discussed. We make a case for studying the whole system as a single unit, in situ. Furthermore, we argue that while plasma-generated chemical species are the proposed key effectors in biological systems, the contribution of physical effectors (electric fields, surface charging, dielectric properties of target, changes in gap electric fields, etc.) must not be ignored.

Proteomic profiling of antibiotic-resistant Escherichia coli GW-AmxH19 isolated from hospital wastewater treated with physical plasma

Microorganisms which are resistant to antibiotics are a global threat to the health of humans and animals. Wastewater treatment plants are known hotspots for the dissemination of antibiotic resistances. Therefore, novel methods for the inactivation of pathogens, and in particular antibiotic-resistant microorganisms (ARM), are of increasing interest. An especially promising method could be a water treatment by physical plasma which provides charged particles, electric fields, UV-radiation, and reactive species. The latter are foremost responsible for the antimicrobial properties of plasma. Thus, with plasma it might be possible to reduce the amount of ARM and to establish this technology as additional treatment stage for wastewater remediation. However, the impact of plasma on microorganisms beyond a mere inactivation was analyzed in more detail by a proteomic approach. Therefore, Escherichia coli GW-AmxH19, isolated from hospital wastewater in Germany, was used. The bacterial solution was treated by a plasma discharge ignited between each of four pins and the liquid surface. The growth of E. coli and the pH-value decreased during plasma treatment in comparison with the untreated control. Proteome and antibiotic resistance profile were analyzed. Concentrations of nitrite and nitrate were determined as long-lived indicative products of a transient chemistry associated with reactive nitrogen species (RNS). Conversely, hydrogen peroxide served as indicator for reactive oxygen species (ROS). Proteome analyses revealed an oxidative stress response as a result of plasma-generated RNS and ROS as well as a pH-balancing reaction as key responses to plasma treatment. Both, the generation of reactive species and a decreased pH-value is characteristic for plasma-treated solutions. The plasma-mediated changes of the proteome are discussed also in comparison with the Gram-positive bacterium Bacillus subtilis. Furthermore, no effect of the plasma treatment, on the antibiotic resistance of E. coli, was determined under the chosen conditions. The knowledge about the physiological changes of ARM in response to plasma is of fundamental interest to understand the molecular basis for the inactivation. This will be important for the further development and implementation of plasma in wastewater remediation.

Environmentally Friendly UV-C Excimer Light Source with Advanced Oxidation Process for Rapid Mineralization of Azo Dye in Wastewater

Wastewater discharged from the textile industry contains approximately 15% unfixed dyes, predominantly 60-70% azo dyes. These unfixed dyes are a major environmental concern due to their persistence and potential toxicity. In this paper, an environmentally friendly mercury-free XeI* excilamp emitting 253 nm UV light is reported, and the same has been utilized for the degradation of azo dyes using the advanced oxidation process (AOP) with TiO2/H2O2. A new process is developed in which one electrode of excilamp is coated with TiO2 nanoparticles that improves the efficiency of the dye degradation. Additionally, the effects of varying TiO2 loading concentrations, XeI*-excimer light intensity, starting dye concentration, suspension pH, and H2O2 addition are examined. The outcomes of this study confirm 13 times faster degradation in XeI*-excimer/H2O2 than in XeI*-excimer/TiO2, attributed to an abundance of hydroxyl radicals generated by the modified XeI*-excimer/H2O2. Also, the degradation of RB5 in the modified XeI*-excimer/H2O2 is 2.3 times faster as compared to that of the bare electrode XeI*-excimer/H2O2. A more than 95% reduction in chemical oxygen demand has been achieved in 40 min in the case of XeI*-excimer/H2O2. In this study, a maximum energy yield of 5712 mg/kWh is reported. Furthermore, a high degree of degradation is found in the alkaline medium (pH 10). Because textile effluent is highly alkaline, this result is significant, and direct treatment of azo dyes is possible. The use of the developed source in industrial applications appears to be highly promising based on testing on a real wastewater matrix. The treated effluent has been utilized to study its reusability for agricultural purposes on the germination of radish seeds in soil, and ∼26% enhanced germination has been observed compared to dye wastewater.

Probing time-resolved plasma-driven solution electrochemistry in a falling liquid film plasma reactor: Identification of HO2- as a plasma-derived reducing agent

Many applications involving plasma-liquid interactions depend on the reactive processes occurring at the plasma-liquid interface. We report on a falling liquid film plasma reactor allowing for in situ optical absorption measurements of the time-dependence of the ferricyanide/ferrocyanide redox reactivity, complemented with ex situ measurement of the decomposition of formate. We found excellent agreement between the measured decomposition percentages and the diffusion-limited decomposition of formate by interfacial plasma-enabled reactions, except at high pH in thin liquid films, indicating the involvement of previously unexplored plasma-induced liquid phase chemistry enabled by long-lived reactive species. We also determined that high pH facilitates a reduction-favoring environment in ferricyanide/ferrocyanide redox solutions. In situ conversion measurements of a 1:1 ferricyanide/ferrocyanide redox mixture exceed the measured ex situ conversion and show that conversion of a 1:1 ferricyanide/ferrocyanide mixture is strongly dependent on film thickness. We identified three dominant processes: reduction faster than ms time scales for film thicknesses >100 µm, •OH-driven oxidation on time scales of <10 ms, and reduction on 15 ms time scales for film thickness <100 µm. We attribute the slow reduction and larger formate decomposition at high pH to HO2- formed from plasma-produced H2O2 enabled by the high pH at the plasma-liquid interface as confirmed experimentally and by computed reaction rates of HO2- with ferricyanide. Overall, this work demonstrates the utility of liquid film reactors in enabling the discovery of new plasma-interfacial chemistry and the utility of atmospheric plasmas for electrodeless electrochemistry.

Influence of MHz-order acoustic waves on bacterial suspensions

The development of alternative techniques to efficiently inactivate bacterial suspensions is crucial to prevent transmission of waterborne illness, particularly when commonly used techniques such as heating, filtration, chlorination, or ultraviolet treatment are not practical or feasible. We examine the effect of MHz-order acoustic wave irradiation in the form of surface acoustic waves (SAWs) on Gram-positive (Escherichia coli) and Gram-negative (Brevibacillus borstelensis and Staphylococcus aureus) bacteria suspended in water droplets. A significant increase in the relative bacterial load reduction of colony-forming units (up to 74%) can be achieved by either increasing (1) the excitation power, or, (2) the acoustic treatment duration, which we attributed to the effect of the acoustic radiation force exerted on the bacteria. Consequently, by increasing the maximum pressure amplitude via a hybrid modulation scheme involving a combination of amplitude and pulse-width modulation, we observe that the bacterial inactivation efficiency can be further increased by approximately 14%. By combining this scalable acoustic-based bacterial inactivation platform with plasma-activated water, a 100% reduction in E. coli is observed in less than 10 mins, therefore demonstrating the potential of the synergistic effects of MHz-order acoustic irradiation and plasma-activated water as an efficient strategy for water decontamination.

Gas plasma-induced platelet activation corresponds to reactive species profiles and lipid oxidation

Surgical-induced hemostasis is a critical step in the closure of incisions, which is frequently achieved via electrocauterization and subsequent tissue necrotization. The latter is associated with postoperative complications. Recent in vivo work suggested reactive species-producing gas plasma technology as a pro-homeostatic agent acting via platelet activation. However, it remained elusive how platelet activation is linked to lipid and protein oxidation and the reactive species compositions. A direct relation between the reactive species composition and platelet activation was revealed by assessing the production of several reactive species and by using antioxidants. In addition, platelet lipidome and proteome analysis identified significantly regulated key lipids in the platelet activation pathway, such as diacylglycerols and phosphatidylinositol as well as oxylipins like thromboxanes. Lipid oxidation products mainly derived from phosphatidylethanolamine and phosphatidylserine species were observed at modest levels. In addition, oxidative post-translational modifications were identified on key proteins of the hemostasis machinery. This study provides new insights into oxidation-induced platelet activation in general and suggests a potential role of those processes in gas plasma-mediated hemostasis in particular.

Chronic oxidative stress adaptation in head and neck cancer cells generates slow-cyclers with decreased tumour growth in vivo

BACKGROUND

Reactive oxygen species (ROS) are implicated in cancer therapy and as drivers of microenvironmental tumour cell adaptations. Medical gas plasma is a multi-ROS generating technology that has been shown effective for palliative tumour control in head and neck cancer (HNC) patients before tumour cells adapted to the oxidative stress and growth regressed fatally.

METHODS

In a bedside-to-bench approach, we sought to explore the oxidative stress adaptation in two human squamous cell carcinoma cell lines. Gas plasma was utilised as a putative therapeutic agent and chronic oxidative stress inducer.

RESULTS

Cellular responses of single and multiple treated cells were compared regarding sensitivity, cellular senescence, redox state and cytokine release. Whole transcriptome analysis revealed a strong correlation of cancer cell adaption with increased interleukin 1 receptor type 2 (IL1R2) expression. Using magnetic resonance imaging, tumour growth and gas plasma treatment responses of wild-type (WT) and repeatedly exposed (RE) A431 cells were further investigated in a xenograft model in vivo. RE cells generated significantly smaller tumours with suppressed inflammatory secretion profiles and increased epidermal growth factor receptor (EGFR) activity showing significantly lower gas plasma sensitivity until day 8.

CONCLUSIONS

Clinically, combination treatments together with cetuximab, an EGFR inhibitor, may overcome acquired oxidative stress resistance in HNC.

Potential generation of nano-sized mist by passing a solution through dielectric barrier discharge

Plasma medicine, a therapeutic technology that uses atmospheric-pressure plasma, is attracting much attention as an innovative tool for the medical field. Most of the plasma biomedical tools use direct effects, such as heat, optical stimulation, and reactive chemical species, on the lesion. Nanoparticulation techniques using indirect action by plasma, i.e., generation of electric fields, have the potential to be applied to promote transdermal absorption, where drugs pass through the barrier function of skin and penetrate into internal tissues. Here, we show a method to directly generate the nano-sized mist by passing a solution through the dielectric barrier discharge. This method enables us to produce the mist potentially in the nanometer size range for both water-based and oil-based solutions. Ease of mist generation was influenced by the plasma-induced changes in physical and chemical characteristics, including electrical conductivity, viscosity, and chemical species. We anticipate the developed method for nano-sized mist generation to provide a technique in the applications of the transdermal absorption system, including those related to pharmaceuticals and cosmetics.

Plasma parameters and the reduction potential at a plasma-liquid interface

Nonthermal plasmas in contact with liquids have been shown to generate a variety of reactive species capable of initiating reduction-oxidation (redox) reactions at the electrochemically active plasma-liquid interface. In conventional electrochemical cells, selective redox chemistry is achieved by controlling the reduction potential at the solid electrode-electrolyte interface by applying a bias via an external circuit. In the case of plasma-liquid systems, an analogous means of tuning the reduction potential near the interface has not clearly been identified. When treated as a floating surface, the liquid is expected to adopt a net negative charge to balance the flux of hot electrons and relatively cold positive ions. The reduction potential near the plasma-liquid interface is hypothesized to be proportional to the floating potential, which can be approximated using an analytical model provided the plasma parameters are known. Herein, we present a framework for correlating the electron density and electron temperature of a noble gas plasma jet to the reduction potential near the plasma-liquid interface. The plasma parameters were acquired for an argon atmospheric plasma jet in contact with an aqueous solution by means of laser Thomson scattering. The reduction potential was determined using identical reference electrodes to measure the potential difference between the plasma-liquid interface and bulk solution. Interestingly, the measured reduction potentials near the plasma-liquid interface were found to be in good agreement with the model-predicted values determined using the plasma parameters obtained from the Thomson scattering experiments.

Mechanistic Insight into Permeation of Plasma-Generated Species from Vacuum into Water Bulk

Due to their potential benefits, cold atmospheric plasmas (CAPs), as biotechnological tools, have been used for various purposes, especially in medical and agricultural applications. The main effect of CAP is associated with reactive oxygen and nitrogen species (RONS). In order to deliver these RONS to the target, direct or indirect treatment approaches have been employed. The indirect method is put into practice via plasma-activated water (PAW). Despite many studies being available in the field, the permeation mechanisms of RONS into water at the molecular level still remain elusive. Here, we performed molecular dynamics simulations to study the permeation of RONS from vacuum into the water interface and bulk. The calculated free energy profiles unravel the most favourable accumulation positions of RONS. Our results, therefore, provide fundamental insights into PAW and RONS chemistry to increase the efficiency of PAW in biological applications.

Nanoscale plasma-activated aerosol generation for in situ surface pathogen disinfection

Plasma treatment constitutes an efficient method for chemical-free disinfection. A spray-based system for dispensing plasma-activated aerosols onto surfaces would facilitate disinfection of complex and/or hidden surfaces inaccessible to direct line-of-sight (for example, UV) methods. The complexity and size of current plasma generators (for example, plasma jet and cometary plasma systems)-which prohibit portable operation, together with the short plasma lifetimes, necessitate a miniaturized in situ technique in which a source can be simultaneously activated and administered on-demand onto surfaces. Here, we demonstrate this possibility by combining two nanoscale technologies for plasma and aerosol generation into an integrated device that is sufficiently small and lightweight. Plasma is generated on a carpet of zinc oxide nanorods comprising a nanoneedle ensemble, which when raised to a high electric potential, constitutes a massive point charge array with near-singular electric fields to effect atmospheric breakdown. The plasma is then used to activate water transported through an underlying capillary wick, that is subsequently aerosolized under MHz-order surface acoustic waves. We show that the system, besides being amenable to miniaturization and hence integration into a chipscale device, leads to a considerable improvement in plasma-activation over its macroscale cometary discharge predecessor, with up to 20% and 127% higher hydrogen peroxide and nitrite ion concentrations that are respectively generated in the plasma-activated aerosols. This, in turn, leads to a 67% reduction in the disinfection time to achieve 95% bacterial load reduction, therefore demonstrating the potential of the technology as an efficient portable platform for on-demand field-use surface disinfection.

High removal efficiency of industrial toxic compounds through stable catalytic reactivity in water treatment system

We identified optimal conditions for the disposal of high concentration of organic contaminants within a short time using a hybrid advanced oxidation process (AOP) combining various oxidizing agents. Plasma-treated water (PTW) containing many active species, that play dominant roles in the degradation of organic substances like hydroxyl radicals, atomic oxygen, ozone, and hydrogen peroxide, was used in this study as a strategy to improve degradation performance without the use of expensive chemical reagents like hydrogen peroxide. In particular, the optimal decomposition conditions using PTW, which were combined with 10 mg/h ozone, 2 g/L iron oxide, and 4 W UV light, demonstrated excellent removal abilities of a high concentration of reactive black 5 (RB5; 100 mg/L, >99%, [k] = 4.15 h^-1) and tetracycline (TC; 10 mg/L, >96.5%, [k] = 3.35 h^-1) for 25 min, approximately 1.5 times higher than that without PTW (RB5; 100 mg/L, 94%, [k] = 2.80 h^-1). These results confirmed that the production of strong reactive hydroxyl radicals from the decomposition process, as well as various reactive species included in PTW efficiently attacked pollutant substances, resulting in a higher removal rate. This suggests that a water treatment system with this optimal condition based on complex AOP systems using PTW could be useful in critical environmental and biomedical applications.

A review on non-thermal plasma treatment of water contaminated with antibiotics

Large amounts of antibiotics are produced and consumed worldwide, while wastewater treatment is still rather inefficient, leading to considerable water contamination. Concentrations of antibiotics in the environment are often sufficiently high to exert a selective pressure on bacteria of clinical importance that increases the prevalence of resistance. Since the drastic reduction in the use of antibiotics is not envisaged, efforts to reduce their input into the environment by improving treatment of contaminated wastewater is essential to limit uncontrollable spread of antibiotic resistance. This paper reviews recent progress on the use of non-thermal plasma for the degradation of antibiotics in water. The target compounds removal, the energy efficiency and the mineralization are analyzed as a function of discharge configuration and the most important experimental parameters. Various ways to improve the plasma process efficiency are addressed. Based on the identified reaction intermediates, degradation pathways are proposed for various classes of antibiotics and the degradation mechanisms of these chemicals under plasma conditions are discussed.

Plasma Treated Water Solutions in Cancer Treatments: The Contrasting Role of RNS

Plasma Treated Water Solutions (PTWS) recently emerged as a novel tool for the generation of Reactive Oxygen and Nitrogen Species (ROS and RNS) in liquids. The presence of ROS with a strong oxidative power, like hydrogen peroxide (H₂O₂), has been proposed as the main effector for the cancer-killing properties of PTWS. A protective role has been postulated for RNS, with nitric oxide (NO) being involved in the activation of antioxidant responses and cell survival. However, recent evidences proved that NO-derivatives in proper mixtures with ROS in PTWS could enhance rather than reduce the selectivity of PTWS-induced cancer cell death through the inhibition of specific antioxidant cancer defenses. In this paper we discuss the formation of RNS in different liquids with a Dielectric Barrier Discharge (DBD), to show that NO is absent in PTWS of complex composition like plasma treated (PT)-cell culture media used for in vitro experiments, as well as its supposed protective role. Nitrite anions (NO₂^-) instead, present in our PTWS, were found to improve the selective death of Saos2 cancer cells compared to EA.hy926 cells by decreasing the cytotoxic threshold of H₂O₂ to non-toxic values for the endothelial cell line.

Plasma-Treated Solutions (PTS) in Cancer Therapy

Simple Summary

Cold physical plasma is a partially ionized gas generating various reactive oxygen and nitrogen species (ROS/RNS) simultaneously. ROS/RNS have therapeutic effects when applied to cells and tissues either directly from the plasma or via exposure to solutions that have been treated beforehand using plasma processes. This review addresses the challenges and opportunities of plasma-treated solutions (PTSs) for cancer treatment.

Abstract

Cold physical plasma is a partially ionized gas generating various reactive oxygen and nitrogen species (ROS/RNS) simultaneously. ROS/RNS have therapeutic effects when applied to cells and tissues either directly from the plasma or via exposure to solutions that have been treated beforehand using plasma processes. This review addresses the challenges and opportunities of plasma-treated solutions (PTSs) for cancer treatment. These PTSs include plasma-treated cell culture media in experimental research as well as clinically approved solutions such as saline and Ringer’s lactate, which, in principle, already qualify for testing in therapeutic settings. Several types of cancers were found to succumb to the toxic action of PTSs, suggesting a broad mechanism of action based on the tumor-toxic activity of ROS/RNS stored in these solutions. Moreover, it is indicated that the PTS has immuno-stimulatory properties. Two different routes of application are currently envisaged in the clinical setting. One is direct injection into the bulk tumor, and the other is lavage in patients suffering from peritoneal carcinomatosis adjuvant to standard chemotherapy. While many promising results have been achieved so far, several obstacles, such as the standardized generation of large volumes of sterile PTS, remain to be addressed.

Cumulative damage by nonthermal plasma (NTP) exceeds the defense barrier of multiple antibiotic-resistant Staphylococcus aureus: a key to achieve complete inactivation

Objectives

The aim of this study was to provide a comprehensive understanding of the nonthermal plasma (NTP)-induced inactivated behaviors on a multiple antibiotic–resistant (MAR) Staphylococcus aureus (S. aureus).

Materials and Methods

A dielectric barrier discharge (DBD) NTP system was employed for the inactivation of a MAR S. aureus under various applied powers of 35, 45, and 55 W, and gas distances of 4, 6, and 8 mm. The inactivation kinetics of S. aureus were estimated with linear and nonlinear predictive models. In addition, degradation of carotenoid pigment, peroxidation of fatty acids, oxidation of nucleic acids and proteins, and alteration in gene expression were analyzed after NTP treatment.

Results and Discussion

The computationally simulated results indicated that the densities of various reactive species increased with enhanced applied powers and decreased discharge distances. These species were further transformed into reactive oxidative and nitrogen species in the gas–liquid interphase and liquid phase. The oxidative and nitrosative stress of NTP resulted in severe damage to cellular components and the morphological structure of S. aureus. On the other hand, the plasma reactive species could also induce the sublethal injury of S. aureus through upregulating the general stress response, antioxidative and antinitrosative defensive systems. Once the cumulative damages overrode the stress tolerance of S. aureus, the completed cell death was finally achieved by NTP.

Conclusions

This work infers the possible risk of inducing the repair and resistant capacity of pathogens when the applied NTP parameters are inappropriate, which helps the optimization of NTP process to achieve sufficient inactivation.

A low power flexible dielectric barrier discharge disinfects surfaces and improves the action of hydrogen peroxide

There is an urgent need for disinfection and sterilization devices accessible to the public that can be fulfilled by innovative strategies for using cold atmospheric pressure plasmas. Here, we demonstrate a successful novel combination of a flexible printed circuit design of a dielectric barrier discharge (flex-DBD) with an environmentally safe chemical reagent for surface decontamination from bacterial contaminants. Flex-DBD operates in ambient air, atmospheric pressure, and room temperature without any additional gas flow at a power density not exceeding 0.5 W/cm2. The flex-DBD activation of a 3% hydrogen peroxide solution results in the reduction in the bacterial load of a surface contaminant of > 6log10 in 90 s, about 3log10 and 2log10 better than hydrogen peroxide alone or the flex-DBD alone, respectively, for the same treatment time. We propose that the synergy between plasma and hydrogen peroxide is based on the combined action of plasma-generated OH· radicals in the hydrogen peroxide solution and the reactive nitrogen species supplied by the plasma effluent. A scavenger method verified a significant increase in OH· concentration due to plasma treatment. Novel in-situ FTIR absorption spectra show the presence of O3, NO2, N2O, and other nitrogen species. Ozone dissolving in the H2O2 solution can effectively generate OH· through a peroxone process. The addition of the reactive nitrogen species increases the disinfection efficiency of the hydroxyl radicals and other oxygen species. Hence, plasma activation of a low concentration hydrogen peroxide solution, using a hand-held flexible DBD device results in a dramatic improvement in disinfection.

Transport of Gaseous Hydrogen Peroxide and Ozone into Bulk Water vs. Electrosprayed Aerosol

Production and transport of reactive species through plasma–liquid interactions play a significant role in multiple applications in biomedicine, environment, and agriculture. Experimental investigations of the transport mechanisms of typical air plasma species: hydrogen peroxide (H2O2) and ozone (O3) into water are presented. Solvation of gaseous H2O2 and O3 from an airflow into water bulk vs. electrosprayed microdroplets was measured, while changing the water flow rate and applied voltage, during different treatment times and gas flow rates. The solvation rate of H2O2 and O3 increased with the treatment time and the gas–liquid interface area. The total surface area of the electrosprayed microdroplets was larger than that of the bulk, but their lifetime was much shorter. We estimated that only microdroplets with diameters below ~40 µm could achieve the saturation by O3 during their lifetime, while the saturation by H2O2 was unreachable due to its depletion from air. In addition to the short-lived flying microdroplets, the longer-lived bottom microdroplets substantially contributed to H2O2 and O3 solvation in water electrospray. This study contributes to a better understanding of the gaseous H2O2 and O3 transport into water and will lead to design optimization of the water spray and plasma-liquid interaction systems.

Influence of a Helium–Nitrogen RF Plasma Jet on Onion Seed Germination

This paper presents an experiment using a radio frequency atmospheric pressure plasma jet to generate cold plasma for pre-sowing stimulation of Wolska onion seeds. Impact of the He + N2 afterglow plasma on germination was investigated. Eight groups of seeds characterized by different exposure times (2, 5, 10, 15, 60, 120, 240, and 480 s) and distance from the electrodes (20 mm and 50 mm) were used. Pre-sowing plasma stimulation of the seeds improved the germination capacity and germination energy for all tested groups, relative to control. The impact of radio frequency plasma on the onion seed germination parameters was statistically significant. The highest germination parameters were obtained for seeds stimulated for 240 s at a distance of 50 mm. No significant differences in physical and morphological properties of onion seeds were found.

Nonthermal plasma-activated water: A comprehensive review of this new tool for enhanced food safety and quality

Nonthermal plasma (NTP) is an advanced technology that has gained extensive attention because of its capacity for decontaminating food from both biological and chemical sources. Plasma-activated water (PAW), a product of NTP's reaction with water containing a rich diversity of highly reactive oxygen species (ROS) and reactive nitrogen species (RNS), is now being considered as the primary reactive chemical component in food decontamination. Despite exciting developments in this field recently, at present there is no comprehensive review specifically focusing on the comprehensive effects of PAW on food safety and quality. Although PAW applications in biological decontamination have been extensively evaluated, a complete analysis of the most recent developments in PAW technology (e.g., PAW combined with other treatments, and PAW applications in chemical degradation and as curing agents) is nevertheless lacking. Therefore, this review focuses on PAW applications for enhanced food safety (both biological and chemical safeties) according to the latest studies. Further, the subsequent effects on food quality (chemical, physical, and sensory properties) are discussed in detail. In addition, several recent trends of PAW developments, such as curing agents, thawing media, preservation of aquatic products, and the synergistic effects of PAW in combination with other traditional treatments, are also presented. Finally, this review outlines several limitations presented by PAW treatment, suggesting several future research directions and challenges that may hinder the translation of these technologies into real-life applications.

Enhanced Generation of Reactive Species by Cold Plasma in Gelatin Solutions for Selective Cancer Cell Death

Atmospheric pressure plasma jets generate reactive oxygen and nitrogen species (RONS) in liquids and biological media, which find application in the new area of plasma medicine. These plasma-treated liquids were demonstrated recently to possess selective properties on killing cancer cells and attracted attention toward new plasma-based cancer therapies. These allow for local delivery by injection in the tumor but can be quickly washed away by body fluids. By confining these RONS in a suitable biocompatible delivery system, great perspectives can be opened in the design of novel biomaterials aimed for cancer therapies. Gelatin solutions are evaluated here to store RONS generated by atmospheric pressure plasma jets, and their release properties are evaluated. The concentration of RONS was studied in 2% gelatin as a function of different plasma parameters (treatment time, nozzle distance, and gas flow) with two different plasma jets. Much higher production of reactive species (H₂O₂ and NO₂^-) was revealed in the polymer solution than in water after plasma treatment. The amount of RONS generated in gelatin is greatly improved with respect to water, with concentrations of H₂O₂ and NO₂^- between 2 and 12 times higher for the longest plasma treatments. Plasma-treated gelatin exhibited the release of these RONS to a liquid media, which induced an effective killing of bone cancer cells. Indeed, in vitro studies on the sarcoma osteogenic (SaOS-2) cell line exposed to plasma-treated gelatin led to time-dependent increasing cytotoxicity with the longer plasma treatment time of gelatin. While the SaOS-2 cell viability decreased to 12%-23% after 72 h for cells exposed to 3 min of treated gelatin, the viability of healthy cells (hMSC) was preserved (∼90%), establishing the selectivity of the plasma-treated gelatin on cancer cells. This sets the basis for designing improved hydrogels with high capacity to deliver RONS locally to tumors.

In situ generation of plasma-activated aerosols via surface acoustic wave nebulization for portable spray-based surface bacterial inactivation

The presence of reactive species in plasma-activated water is known to induce oxidative stresses in bacterial species, which can result in their inactivation. By integrating a microfludic chipscale nebulizer driven by surface acoustic waves (SAWs) with a low-temperature atmospheric plasma source, we demonstrate an efficient technique for in situ production and application of plasma-activated aerosols for surface disinfection. Unlike bulk conventional systems wherein the water is separately batch-treated within a container, we show in this work the first demonstration of continuous plasma-treatment of water as it is transported through a paper strip from a reservoir onto the chipscale SAW device. The significantly larger surface area to volume ratio of the water within the paper strip leads to a significant reduction in the duration of the plasma-treatment, while maintaining the concentration of the reactive species. The subsequent nebulization of the plasma-activated water by the SAW then allows the generation of plasma-activated aerosols, which can be directly sprayed onto the contaminated surface, therefore eliminating the storage of the plasma-activated water and hence circumventing the typical limitation in conventional systems wherein the concentration of the reactive species diminishes over time during storage, resulting in a reduction in the efficacy of bacterial inactivation. In particular, we show up to 96% reduction in Escherichia coli colonies through direct spraying with the plasma-activated aerosols. This novel, low-cost, portable and energy-efficient hybrid system necessitates only minimal maintenance as it only requires the supply of tap water and battery power for operation, and is thus suitable for decontamination in home environments.

Modeling plasmas in analytical chemistry-an example of cross-fertilization

This paper gives an overview of the modeling work developed in our group in the last 25 years for various plasmas used in analytical spectrochemistry, i.e., glow discharges (GDs), inductively coupled plasmas (ICPs), and laser ablation (LA) for sample introduction in the ICP and for laser-induced breakdown spectroscopy (LIBS). The modeling approaches are briefly presented, which are different for each case, and some characteristic results are illustrated. These plasmas are used not only in analytical chemistry but also in other applications, and the insights obtained in these other fields were quite helpful for us to develop models for the analytical plasmas. Likewise, there is now a huge interest in plasma-liquid interaction, atmospheric pressure glow discharges (APGDs), and dielectric barrier discharges (DBDs) for environmental, medical, and materials applications of plasmas. The insights obtained in these fields are also very relevant for ambient desorption/ionization sources and for liquid sampling, which are nowadays very popular in analytical chemistry, and they could be very helpful in developing models for these sources as well. Graphical abstract.

On a heavy path - determining cold plasma-derived short-lived species chemistry using isotopic labelling

Cold atmospheric plasmas (CAPs) are promising medical tools and are currently applied in dermatology and epithelial cancers. While understanding of the biomedical effects is already substantial, knowledge on the contribution of individual ROS and RNS and the mode of activation of biochemical pathways is insufficient. Especially the formation and transport of short-lived reactive species in liquids remain elusive, a situation shared with other approaches involving redox processes such as photodynamic therapy. Here, the contribution of plasma-generated reactive oxygen species (ROS) in plasma liquid chemistry was determined by labeling these via admixing heavy oxygen 18O2 to the feed gas or by using heavy water H2 18O as a solvent for the bait molecule. The inclusion of heavy or light oxygen atoms by the labeled ROS into the different cysteine products was determined by mass spectrometry. While products like cysteine sulfonic acid incorporated nearly exclusively gas phase-derived oxygen species (atomic oxygen and/or singlet oxygen), a significant contribution of liquid phase-derived species (OH radicals) was observed for cysteine-S-sulfonate. The role, origin, and reaction mechanisms of short-lived species, namely hydroxyl radicals, singlet oxygen, and atomic oxygen, are discussed. Interactions of these species both with the target cysteine molecule as well as the interphase and the liquid bulk are taken into consideration to shed light onto several reaction pathways resulting in observed isotopic oxygen incorporation. These studies give valuable insight into underlying plasma-liquid interaction processes and are a first step to understand these interaction processes between the gas and liquid phase on a molecular level.

GSH Modification as a Marker for Plasma Source and Biological Response Comparison to Plasma Treatment

This study investigated the use of glutathione as a marker to establish a correlation between plasma parameters and the resultant liquid chemistry from two distinct sources to predefined biological outcomes. Two different plasma sources were operated at parameters that resulted in similar biological responses: cell viability, mitochondrial activity, and the cell surface display of calreticulin. Specific glutathione modifications appeared to be associated with biological responses elicited by plasma. These modifications were more pronounced with increased treatment time for the European Cooperation in Science and Technology Reference Microplasma Jet (COST-Jet) and increased frequency for the dielectric barrier discharge and were correlated with more potent biological responses. No correlations were found when cells or glutathione were exposed to exogenously added long-lived species alone. This implied that short-lived species and other plasma components were required for the induction of cellular responses, as well as glutathione modifications. These results showed that comparisons of medical plasma sources could not rely on measurements of long-lived chemical species; rather, modifications of biomolecules (such as glutathione) might be better predictors of cellular responses to plasma exposure.

Plasma Medicine: A Field of Applied Redox Biology

Plasma medicine comprises the application of physical plasma directly on or in the human body for therapeutic purposes. Three most important basic plasma effects are relevant for medical applications: i) inactivation of a broad spectrum of microorganisms, including multidrug-resistant pathogens, ii) stimulation of cell proliferation and angiogenesis with lower plasma treatment intensity, and iii) inactivation of cells by initialization of cell death with higher plasma treatment intensity, above all in cancer cells. Based on own published results as well as on monitoring of relevant literature the aim of this topical review is to summarize the state of the art in plasma medicine and connect it to redox biology. One of the most important results of basic research in plasma medicine is the insight that biological plasma effects are mainly mediated via reactive oxygen and nitrogen species influencing cellular redox-regulated processes. Plasma medicine can be considered a field of applied redox biology.

Production of reactive species in alginate hydrogels for cold atmospheric plasma-based therapies

In the last years, great advances have been made in therapies based in cold atmospheric plasmas (CAP). CAP generate reactive oxygen and nitrogen species (RONS) which can be transferred to liquids. These CAP activated liquids display the same biological efficacy (i.e. on killing cancer cells) as CAP themselves, opening the door for minimally invasive therapies. However, injection of a liquid in the body results in fast diffusion due to extracellular fluids and blood flow. Therefore, the development of efficient vehicles which allow local confinement and delivery of RONS to the diseased site is a fundamental requirement. In this work, we investigate the generation of RONS (H2O2, NO2-, short-lived RONS) in alginate hydrogels by comparing two atmospheric pressure plasma jets: kINPen and a helium needle, at a range of plasma treatment conditions (time, gas flow, distance to the sample). The physic-chemical properties of the hydrogels remain unchanged by the plasma treatment, while the hydrogel shows several-fold larger capacity for generation of RONS than a typical isotonic saline solution. Part of the RONS are quickly released to a receptor media, so special attention has to be put on the design of hydrogels with in-situ crosslinking. Remarkably, the hydrogels show capacity for sustained release of the RONS. The plasma-treated hydrogels remain fully biocompatible (due the fact that the species generated by plasma are previously washed away), indicating that no cytotoxic modifications have occurred on the polymer. Moreover, the RONS generated in alginate solutions showed cytotoxic potential towards bone cancer cells. These results open the door for the use of hydrogel-based biomaterials in CAP-associated therapies.

Biological and medical applications of plasma-activated media, water and solutions

Non-thermal atmospheric pressure plasma has been proposed as a new tool for various biological and medical applications. Plasma in close proximity to cell culture media or water creates reactive oxygen and nitrogen species containing solutions known as plasma-activated media (PAM) or plasma-activated water (PAW) - the latter even displays acidification. These plasma-treated solutions remain stable for several days with respect to the storage temperature. Recently, PAM and PAW have been widely studied for many biomedical applications. Here, we reviewed promising reports demonstrating plasma-liquid interaction chemistry and the application of PAM or PAW as an anti-cancer, anti-metastatic, antimicrobial, regenerative medicine for blood coagulation and even as a dental treatment agent. We also discuss the role of PAM on cancer initiation cells (spheroids or cancer stem cells), on the epithelial mesenchymal transition (EMT), and when used for metastasis inhibition considering its anticancer effects. The roles of PAW in controlling plant disease, seed decontamination, seed germination and plant growth are also considered in this review. Finally, we emphasize the future prospects of PAM, PAW or plasma-activated solutions in biomedical applications with a discussion of the mechanisms and the stability and safety issues in relation to humans.

CuO@Cu/Ag/MWNTs/sponge electrode-enhanced pollutant removal in dielectric barrier discharge (DBD) reactor

In this study, a sponge modified by multi-walled carbon nanotubes (MWNTs) was used as sheet support for the adsorption of CuO@Cu and Ag nanowires to prepare a CuO@Cu/Ag/MWNTs/sponge electrode. Similar to their use in a dielectric barrier discharge (DBD) reactor, the MWNTs changed the conductivity and water absorptivity of the modified electrode, whereas the CuO@Cu and Ag nanowires significantly enhanced the tip effect to increase discharge. The optimal ratio of the Ag:CuO@Cu nanowires was 5:3 at a total adsorbed concentration of 0.8 g L^-1. Compared with CuO@Cu and Ag nanowires were separately adsorbed on the MWNTs/sponge, and the CuO@Cu/Ag/MWNTs/sponges recorded higher current response, lower discharge inception voltage, and higher removal efficiency of phenol and 2,4,5-trichlorobiphenyl (PCB29) through their degradation. The removal efficiency reached 100% within 30 min of the reaction for the degradation of phenol and 65.1% within 60 min of the reaction for the degradation of PCB29 at an input voltage of 30 V. These results show that the CuO@Cu/Ag/MWNTs/sponge structure has significant potential for use in the DBD reactor to improve the discharge efficiency of the system and reduce energy consumption, and can be further extended to other types of plasma reactors.

Microplasma Bubbles: Reactive Vehicles for Biofilm Dispersal

Interactions between effects generated by cold atmospheric-pressure plasmas and water have been widely investigated for water purification, chemical and nanomaterial synthesis, and, more recently, medicine and biotechnology. Reactive oxygen and nitrogen species (RONS) play critical roles in transferring the reactivity from gas plasmas to solutions to induce specific biochemical responses in living targets, e.g., pathogen inactivation and biofilm removal. While this approach works well in a single-organism system at a laboratory scale, integration of plasma-enabled biofilm removal into complex real-life systems, e.g., large aquaculture tanks, is far from trivial. This is because it is difficult to deliver sufficient concentrations of the right kind of species to biofilm-covered surfaces while carefully maintaining a suitable physiochemical environment that is healthy for its inhabitants, e.g., fish. In this work, we show that underwater microplasma bubbles (generated by a microplasma-bubble reactor that forms a dielectric barrier discharge at the gas-liquid interface with the applied voltage of 4.0 kV) act as transport vehicles to efficiently deliver reactive plasma species to the target biofilm sites on artificial and living surfaces while keeping healthy water conditions in a multispecies system. The as-generated air microplasma bubbles and plasma-activated water (PAW) both can effectively reduce the existing pathogenic biofilm load by ∼83 and 60%, respectively, after 15 min of discharge at 40 W and prevent any new biofilm from forming. The generation of underwater microplasma bubbles in a custom-made fish tank for less than a minute per day (20 s per time, twice daily) can introduce sufficient quantities of RONS into PAW to reduce the biofilm-infected area by ∼80-90% and improve the health status of Cichlasoma synspilum × Cichlasoma citrinellum blood parrot cichlid fish. Species generated include hydrogen peroxide, ozone, nitrite, nitrate, and nitric oxide. Using mimicked chemical solutions, we show that the plasma-induced nitric oxide acts as a critical bioactive species that triggers the release of cells from the biofilm and their inactivation.

Reactivity and stability of plasma-generated oxygen and nitrogen species in buffered water solution: a computational study

Plasma-treated liquids have great potential for biomedical applications.

Analysis of Short-Lived Reactive Species in Plasma-Air-Water Systems: The Dos and the Do Nots

This Feature addresses the analysis of the reactive species generated by nonthermal atmospheric pressure plasmas, which are widely employed in industrial and biomedical research, as well as first clinical applications. We summarize the progress in detection of plasma-generated short-lived reactive oxygen and nitrogen species in aqueous solutions, discuss the potential and limitations of various analytical methods in plasma-liquid systems, and provide an outlook on the possible future research goals in development of short-lived reactive species analysis methods for a general nonspecialist audience.

Non-touching plasma-liquid interaction - where is aqueous nitric oxide generated?

Nitric oxide is a relatively stable free radical and an important signal molecule in plants, animals, and humans with high relevance for biological processes involving inflammatory processes, e.g. wound healing or cancer. The molecule can be detected in the gas phase of non-thermal plasma jets making it a valuable tool for clinical intervention, but transport efficiency from the gas phase into the liquid phase or tissue remains to be clarified. To elucidate this fact, the nitric oxide concentration in buffered solutions is determined using electron paramagnetic resonance spectroscopy. The origin of the nitric oxide in the liquid could be excluded, therefore, potential precursors such as hydroxyl radicals, superoxide anions, atomic hydrogen and stable species (nitrite, nitrate and hydrogen peroxide) were detected and the potential formation pathway as well as ways of enhancing the production of nitric oxide by alteration of the feed gas and the surrounding gas composition during plasma treatment of the liquid have been pointed out.