Selective Liquid-Liquid Extraction of Thorium(IV) from Rare-Earth Element Mixtures

One of the major challenges in processing rare-earth element (REE) materials arises from the large amounts of radioactive thorium (Th) that are often found within REE minerals, encouraging enhanced metal separation procedures. We report here a study aimed at developing improved systems for REE processing with the goal of efficient extraction of Th(IV) from acidic solution. A tripodal ligand, TRPN-CMPO-Ph, was prepared that utilizes carbamoylmethylphosphine oxide (CMPO) chelators tethered to a tris(3-aminopropyl)amine (TRPN) capping scaffold. The ligand and its metal complexes were characterized by using elemental analysis, NMR, Fourier transform infrared spectroscopy, mass spectrometry, and luminescence spectroscopy. Using a liquid-liquid metal extraction protocol, TRPN-CMPO-Ph selectively extracts Th(IV) at an efficiency of 79% from a mixture of Th(IV), UO22+, and all rare-earth metal cations (except promethium) dissolved in nitric acid into an organic solvent. Th(IV) extraction selectivity is maintained upon extraction from a mixture that approximates a typical monazite leach solution containing several relevant lanthanide ions, including two ions at higher concentration relative to Th(IV). Comparative studies with a tris(2-aminoethyl)amine (TREN)-capped derivative are presented and support the need for a larger TRPN capping scaffold in achieving Th(IV) extraction selectivity.

Understanding the Complexation of Alkyl-Substituted Nitrilotriacetamides with Uranium: A Study by Absorption Spectroscopy and Microcalorimetry

Complexation thermodynamics of UO22+ ions with a series of alkyl-substituted nitrilotriacetamides (NTA) was investigated by absorption spectroscopy and microcalorimetry. The hexamethyl derivative of NTA (HMNTA) forms the weakest two successive complexes with UO22+ ions with stability constants of log β11 = 3.5 ± 0.1 and log β12 = 6.1 ± 0.1. The formation constant values increased linearly with increasing alkyl chain length of the substituents from hexamethyl NTA to hexabutyl NTA (HBNTA) and to hexahexyl NTA (HHNTA). The complexation with each ligand was both enthalpy and entropy driven with exothermic enthalpy changes of ΔH11 = -14.7 ± 1.0 kJ/mol, ΔH12 = -10.2 ± 0.8 kJ/mol for HMNTA, ΔH11 = -19.2 ± 1.2 kJ/mol, ΔH12 = -16.4 ± 1.1 kJ/mol for HBNTA, and ΔH11 = -21.3 ± 1.4 kJ/mol, ΔH12 = -19.4 ± 2.3 kJ/mol for HHNTA. Similarly, the positive entropy changes with each ligand were ΔS11 = 18.1 ± 2.7 J/mol/K, ΔS12 = 82.9 ± 3.8 J/mol/K for HMNTA, ΔS11 = 14.4 ± 1.2 J/mol/K, ΔS12 = 87.2 ± 4.2 J/mol/K for HBNTA, and ΔS11 = 16.1 ± 2.4 J/mol/K, ΔS12 = 92.6 ± 3.1 J/mol/K for HHNTA. Structural features of the complex suggest the participation of two ligands coordinating in a bidentate mode via the carbonyl oxygens. The [UO2L2]2+ complexes appear to be noncentrosymmetric with two ligands and one water molecule occupying the equatorial plane of the dioxo uranyl cation. The structure of the complex was confirmed by 1H NMR titration, EXAFS measurements, and DFT calculations.

Amine-Terminated Phenanthroline Diimides as Aqueous Masking Agents for Am(III)/Eu(III) Separation: An Alternative Ligand Design Strategy for Water-Soluble Lanthanide/Actinide Chelating Ligands

Selective actinide coordination (from lanthanides) is critical for both nuclear waste management and sustainable development of nuclear power. Hydrophilic ligands used as masking agents to withhold actinides in the aqueous phase are currently highly pursued, while synthetic accessibility, water solubility, acid resistance, and extraction capability are the remaining problems. Most reported hydrophilic ligands are only effective at low acidity. We recently proved that the phenanthroline diimide skeleton was an efficient building block for the construction of highly efficient acid-resistant hydrophilic lanthanide/actinide separation agents, while the limited water solubility hindered the loading capability of the ligand. Herein, amine was introduced as the terminal solubilizing group onto the phenanthroline diimide backbone, which after protonation in acid showed high water solubility. The positively charged terminal amines enhanced the ligand water solubility to a large extent, which, on the other side, was believed to be detrimental for the coordination and complexation of the metal cations. We showed that by delicately adjusting the alkyl chain spacing, this intuitive disadvantage could be relieved and superior extraction performances could be achieved. This work holds significance for both hydrophilic lanthanide/actinide separation ligand design and, concurrently, offers insights into the development of water-soluble lanthanide/actinide complexes for biomedical and bioimaging applications.

Heterocyclic Ligands with Different N/O Donor Modes for Am(III)/Eu(III) Separation: A Theoretical Perspective

Excellent "CHON" compatible ligands based on a heterocyclic skeleton for the separation of trivalent actinides [An(III)] from lanthanides [Ln(III)] have been widely explored, the aim being spent nuclear fuel reprocessing. The combination mode of a soft/hard (N/O) donor upon the coordination chemistry of An(III) and Ln(III) should play a vital role with respect to the performance of ligands. As such, in this work, two typical experimentally available phenanthroline-derived tetradentate ligands, CyMe4-BTPhen (L1) and Et-Tol-DAPhen (L4), and two theoretically designed asymmetric tetradentate heterocyclic ligands, L2 and L3, with various N/O donors were investigated using scalar relativistic density functional theory. We have evaluated the electronic structures of L1-L4 and their coordination modes, bonding properties, and extraction reactions with Am(III) and Eu(III). We found that the Am/Eu-N interactions play a more important role in the orbital interactions between the ligand and Am(III)/Eu(III) ions. Compared with those of L1, the coordinated O atoms of L2 and L4 weaken the metal-N bonds. The Am(III)/Eu(III) selectivity follows the order L1 > L2 > L4 based on the change in Gibbs free energy, reflecting the fact that the Am(III)/Eu(III) selectivity of the ligand is affected by the number of coordinated N atoms. In addition, L3 displays the strongest binding ability for Am(III)/Eu(III) ions and the smallest Am(III)/Eu(III) selectivity among the four ligands, due to its structural preorganization. This work clarifies the influence of the number of coordinated N and O atoms of ligands on Am(III)/Eu(III) selectivity, which provides valuable fundamental information for the design of efficient ligands with N and O donors for An(III)/Ln(III) separation.

Comparison of Americium(III) and Neodymium(III) Monothiophosphate Complexes

Mixed-donor ligands, such as those containing a combination of O/N or O/S, have been studied extensively for the selective extraction of trivalent actinides, especially Am3+ and Cm3+, from lanthanides during the recycling of used nuclear fuel. Oxygen/sulfur donor ligand combinations also result from the hydrolytic and/or radiolytic degradation of dithiophosphates, such as the Cyanex class of extractants, which are initially converted to monothiophosphates. To understand potential differences between the binding of such degraded ligands to Nd3+ and Am3+, the monothiophosphate complexes [M(OPS(OEt)2)5(H2O)2]2- (M3+ = Nd3+, Am3+) were prepared and characterized by single-crystal X-ray diffraction and optical spectroscopy and studied as a function of pressure up to ca. 14 GPa using diamond-anvil techniques. Although Nd3+ and Am3+ have nearly identical eight-coordinated ionic radii, these structures reveal that while the M-O bond distances in these complexes are almost equal, the M-S distances are statistically different. Moreover, for [Nd(OPS(OEt)2)5(H2O)2]2-, the hypersensitive 4I9/2 → 4G5/2 transition shifts as a function of pressure by -11 cm-1/GPa. Whereas for [Am(OPS(OEt)2)5(H2O)2]2-, the 7F0 → 7F6 transition shows a slightly stronger pressure dependence with a shift of -13 cm-1/GPa and also exhibits broadening of the 5f → 5f transitions at high pressures. These data likely indicate an increased involvement of the 5f orbitals in bonding with Am3+ relative to that of Nd3+ in these complexes.

Molecular-scale understanding of diluent effects on ligand assembly for metal ion separations

Use of metal-selective ligands in solvent extraction is instrumental in extraction of critical materials and recycling, yet, diluent effects on extraction performance are not well understood. Experimental and empirical solvent parameters have been proposed to correlate with extraction performance, but are often inadequate predictors. We follow the hypothesis that the diluents' primary influence on extraction efficiency is whether or not it hinders assembly of the bulky extracting ligands into a geometry necessary for metal complexation. This behavior is readily accessible with molecular dynamics (MD), where the atomistic description of molecules can be applied to arbitrary extractant-solvent molecules and their mixtures. Several simulated quantities are considered, from both pairwise and graph theoretical analyses, and compared to experimental distribution ratio data for americium extraction by TODGA in a series of inert, non-interacting diluents. These simple properties, especially the formation of closed triplets corresponding to the 3 : 1 ligand : metal stoichiometric solvate, suggest a potential predictive power of this approach. This methodology provides a path forward to comprehensively understand and predict diluent effects in more complex systems involving different extracting ligands and multi-component diluent mixtures.

Computational Comparative Study of the Binding of Americium with N-Donor Ligands

The accessibility of multiple valence states of americium (Am) inspired redox-based protocols aimed at efficient separation of trivalent Am (Am3+) from trivalent lanthanides (Ln3+) alternative to the traditional liquid-liquid extraction. This requires an extensive understanding of the coordination chemistry of Am in its various accessible valence states in the aqueous phase. In this work, by means of DFT calculations, the coordination of AmIII-VI with five typical N-donor ligands, i.e., terpyridine (tpy), bispyrazinylpyridine (dpp), bistriazinylpyridine (BTP), bistriazinyl bipyridine (BTBP), and bistrazinyl phenanthroline (BTPhen), was studied in terms of energy and topological analysis. The results show that the exchange of aqua ligands of hydrated ions by N-donor ligands is an entropy-driven process and enthalpically unfavorable. Topological analysis suggests a distinct mechanism of BTP to modulate the redox potential of Am(III) in that BTP can assist the relay of the leaving electron of AmIII, while the other N-donor ligands can detain the oxidation of Am by offering their electron instead. This comparative study enriches our understanding of the coordination chemistry of high-valent Am with N-donor ligands and recommends the ligand design toward the modulation of redox potentials of hydrated Am(III) ions.

Preorganization Effects on Eu(III) Ion Coordination by Dipyridyl-Phenanthroline Ligands: A Combined Experimental and Theoretical Analysis

Although 1,10-phenanthroline has been proven to hold a strong complexing capacity for f-block elements and their derivatives have been applied in many fields, research on more highly or completely rigid phenanthroline ligands is still rare due to the challenging syntheses. Here, we reported three tetradentate ligands 2,9-di(pyridin-2-yl)-1,10-phenanthroline (L1), 12-(pyridin-2-yl)-5,6-dihydroquinolino[8,7b][1,10]phenanthroline (L2), and 5,6,11,12-tetrahydrobenzo[2,1-b:3,4-b']bis([1,10]phenanthroline) (L3) with increasing preorganization on the side chain; among which, L3 is fully preorganized. Their complexation reactions with Eu(III) were systematically investigated by electrospray ionization mass spectrometry (ESI-MS), UV-vis titrations, and single-crystal structures. It is found that all three ligands form only 1:1 M/L complexes with Eu(III). The single-crystal structures revealed that the three ligands hold similar coordination modes, while their stability constants determined by UV-vis titrations were L3 (4.80 ± 0.01) > L2 (4.38 ± 0.01) > L1 (3.88 ± 0.01). This trend is supported not only by the thermodynamic stability of rigid ligands compared to free ligands but also by the conclusion that rigid ligands exhibit faster reaction rates (lower energy barrier) than free ligands kinetically. This work is helpful in providing theoretical guidance for the subsequent development of highly preorganized chelating ligands with strong coordination ability and high selectivity for f-block elements.

Advanced Uranium Removal with Pure, Nonfluorinated Ionic Liquids: Fine-Tuning Hydrophilic and Hydrophobic Properties for Enhanced Selectivity

Ionic liquids (ILs) have significant potential for eco-friendly extraction of uranium from aqueous solutions, which is critical for nuclear technology, fuel cycle management, and environmental protection. This study examines the impact of the adjustable hydrophobic/hydrophilic properties of ILs on the removal of uranium(VI) (UO22+) from aqueous solutions utilizing both a novel hydrophilic IL (1-butoxyethyl-1-methylmorpholinium butoxyethylphosphite - Mor1-2O4-BOEP) and 1-heptyl-1-methylmorpholinium heptylphosphite (Mor1-7-HP) as an example of a hydrophobic IL with a similar structure. The transfer mechanism of uranyl ions from water to organic or solid phases closely depends on the physicochemical properties of ILs, especially their hydrophobicity. The hydrophobic Mor1-7-HP extracts uranyl via neutral complex formation as UO2(NO3)2-(Mor1-7-HP)2. Conversely, hydrophilic Mor1-2O4-BOEP induced selective precipitation as UO2(NO3)-(BOEP), transferring uranyl to the solid phase. Optimization of the working parameters, in terms of acidity of the aqueous solution and amount of ILs used, allowed the extraction of over 98% of U(VI). The stoichiometry of the organic complex and the precipitate was determined using physicochemical techniques. These tunable H-phosphonate-based ILs have advantages over traditional solvent extraction and conventional ILs, allowing easier handling, improved selectivity, and lower environmental impact. This work advances uranium separation techniques with applications in hydrometallurgy, particularly in the treatment of wastewater and radioactive waste for sustainable uranium recovery.

Theoretical insights into selective extraction of Am(III) from Cm(III) and Eu(III) with asymmetric N-heterocyclic ligands

Separation of lanthanide (Ln) and minor actinide (MA) elements and mutual separation between minor actinide elements (e.g. Am(III) and Cm(III)) represent a crucial undertaking. However, separating these elements poses a significant challenge owing to their highly similar physicochemical properties. Asymmetric N-heterocyclic ligands such as N-ethyl-6-(1H-pyrazol-3-yl)-N-(p-tolyl)picolinamide (Et-p-Tol-A-PzPy) and N-ethyl-N-(p-tolyl)-1,10-phenanthroline-2-carboxamide (ETPhenAm) have recently received considerable attention in the separation of MAs over Ln from acid solutions. By changing the central skeleton structures of these ligands and introducing substituents with different properties on the side chains, their complexation behavior with Am(III), Cm(III), and Eu(III) may be affected. In this work, we explore four different asymmetric N-containing heterocyclic ligands, namely Et-p-Tol-A-PzPy (L1), N-ethyl-6'-(1H-pyrazol-3-yl)-N-(p-tolyl)-[2,2'-bipyridine]-6-carboxamide (L2), N-ethyl-9-(1H-pyrazol-3-yl)-N-(p-tolyl)-1,10-phenanthroline-2-carboxamide (L3), and ETPhenAm (L4) using density functional theory (DFT). The calculated results demonstrate the potential of ligands L1-L4 for the extraction and separation of Am(III), Cm(III), and Eu(III). Ligand analysis shows that ligand L3 binds more easily to the central metal atom, in line with the stronger extraction capacity of L3. In spite of the higher covalence between the side chain and the central metal atom for complexes with L1-L3, the main chain seems to control the stability of the extraction complexes. The preorganized 1,10-phenanthroline backbone also further enhances the extraction performance of L3 and L4. The difference in coordination ability between the side chain donors of these ligands and metal ions may affect their separation efficiency. This work presents theoretical insights into synthesizing novel ligands for separating trivalent actinides by adjusting N-heterocyclic ligands.

Enhancing the Selectivity of Trivalent Actinide over Lanthanide Using Asymmetrical Phenanthroline Diamide Ligands

Phenanthroline diamide ligands have been widely used in the separation of trivalent actinides and lanthanides, but little research has focused on extractants with asymmetrical substitutes. Two novel asymmetrical phenanthroline-based ligands N2,N2,N9-triethyl-N9-tolyl-1,10-phenanthroline-2,9-dicarboxamide (DE-ET-DAPhen) and N2-ethyl-N9,N9-dioctyl-N2-tolyl-1,10-phenanthroline-2,9-dicarboxamide (DO-ET-DAPhen) were first synthesized in this work, whose extraction ability and complexation mechanism to trivalent actinides [An(III)] and lanthanides [Ln(III)] were systematically investigated. The ligands dissolved in n-octanol exhibit good extraction ability and high selectivity toward Am(III) in acidic solutions. The complexation mechanism of the ligands with Ln(III) in solution and solid state was analyzed using slope analysis, 1H NMR spectrometric titration, ESI-MS, and calorimetric titration. It is revealed that the ligands complex with Am(III)/Eu(III) with 1:1 stoichiometry. The stability constant (log β) of the complexation reaction of Eu(III) with DE-ET-DAPhen determined by UV-vis spectrophotometric and calorimetric titration is higher than that of DO-ET-DAPhen, indicating the stronger complexation ability of DE-ET-DAPhen. Meanwhile, the calorimetric titration results show that the complexation process is exothermic with a decreased entropy. The structures of 1:1 complexes of Eu(III) and Nd(III) with DE-ET-DAPhen were analyzed through single-crystal X-ray diffraction. This work proves that ligands containing asymmetrical functional groups are promising for An(III)/Ln(III) separation, which shows great significance in efficient extractants designed for the spent nuclear fuel reprocessing process.

Redox stabilization of Am(v) in a biphasic extraction system boosts americium/lanthanides separation efficiency

Americium (Am) is a key radioactive element in consideration in nuclear waste treatment. Separation of Am from the fission products, lanthanides, is a prerequisite to minimize the hazardous impact of Am and make utilization of rare Am isotopes, but it represents a great challenge due to the chemical similarity between the two groups of elements. Herein, we realize the separation by first oxidizing Am(iii) to high valent Am(vi) and then converting it to Am(v) in situ in a biphasic extraction system with Bi(v) oxidant incorporated in an organic phase. Am(v) is highly stabilized during the separation process and this leads to record high Ln/Am separation factors (>105) in a single contact over a wide range of acidities.

Are 4f-Orbitals Engaged in Covalent Bonding Between Lanthanides and Triphenylphosphine Oxide? An Oxygen K-Edge X-ray Absorption Spectroscopy and Density Functional Theory Study

The bonding covalency between trivalent lanthanides (Ln = La, Pr, Nd, Eu, Gd) and triphenylphosphine oxide (TPPO) is studied by X-ray absorption spectra (XAS) and density functional theory (DFT) calculations on the LnCl3(TPPO)3 complexes. The O, P, and Cl K-edge XAS for the single crystals of LnCl3(TPPO)3 were collected, and the spectra were interpreted based on DFT calculations. The O and P K-edge XAS spectra showed no significant change across the Ln series in the LnCl3(TPPO)3 complexes, unlike the Cl K-edge XAS spectra. The experimental O K-edge XAS spectra suggest no mixing between the Ln 4f- and the O 2p-orbitals in the LnCl3(TPPO)3 complexes. DFT calculations indicate that the amount of the O 2p character per Ln-O bond is less than 0.1% in the Ln 4f-based orbitals in all of the LnCl3(TPPO)3 complexes. The experimental spectra and theoretical calculations demonstrate that Ln 4f-orbitals are not engaged in the covalent bonding of lanthanides with TPPO, which contrasts the involvement of U 5f-orbitals in covalent bonding in the UO2Cl2(TPPO)2 complex. Results in this work reinforce our previous speculation that bonding covalency is potentially responsible for the extractability of monodentate organophosphorus ligands toward metal ions.

Hydroxyl-group functionalized phenanthroline diimides as efficient masking agents for Am(III)/Eu(III) separation under harsh conditions

The separation of Lns(III) from radioactive Ans(III) in high-level liquid waste remains a formidable hydrometallurgical challenge. Water-soluble ligands are believed to be new frontiers in the search of efficient Lns/Ans separation ligands to close the nuclear fuel cycles and dealing with current existing nuclear waste. Currently, the development of hydrophilic ligands far lags behind their lipophilic counterparts due to their complicated synthetic procedures, inferior extraction performances, and acid tolerances. In this paper, we have showed a series of hydroxyl-group functionalized phenanthroline diimides were efficient masking agents for Am(III)/Eu(III) separation under high acidity (˃ 1 M HNO3). Record high SFEu(III)/Am(III) of 162 and 264 were observed for Phen-2DIC2OH and Phen-2DIC4OH in 1.25 M HNO3 which represents the best Eu(III)/Am(III) separation performance at this acidity. UV-vis absorption, NMR and TRLFS titrations were conducted to elucidate the predominant of 1:1 ligand/metal species under extraction conditions. X-ray data of both the ligand and Eu(III) complex together with DFT calculations revealed the superior extraction performances and selectivities. The current reported hydrophilic ligands were easy to prepare and readily to scale-up, acid tolerant and highly efficient, together with their CHON-compatible nature make them promising candidates in the development of advanced separation processes.

Selective Separation of Americium(III), Curium(III), and Lanthanide(III) by Aqueous and Organic Competitive Extraction

Adding hydrophilic ligands into aqueous solutions for the selective binding of actinides(III) is acknowledged as an advanced strategy in Ln(III)/An(III) separation. In view of the recycling and radioactive waste disposal of the minor actinide, there remains an urgent need to design and develop the appropriate ligand for selective separation of An(III) from Ln(III). Herein, four novel hydrophilic ligands with hard-soft hybrid donors, derived from the pyridine and phenanthroline skeletons, were designed and synthesized as masking agents for selective complexation of An(III) in the aqueous phase. The known N,N,N',N'-tetraoctyl diglycolamide (TODGA) was used as lipophilic extractant in the organic phase for extraction of Ln(III), and a new strategy for the competitive extraction of An(III) and Ln(III) was developed based on TODGA and the above hydrophilic ligands. The optimal hydrophilic ligand of N,N'-bis(2-hydroxyethyl)-2,9-dicarboxamide-1,10-phenanthroline (2OH-DAPhen) displayed exceptional selectivity toward Am(III) over Ln(III), with the concentrations of HNO3 ranging from 0.05 to 3.0 M. The maximum separation factors were up to 1365 for Eu/Am, 417.66 for Eu/Cm, and 42.38 for La/Am. The coordination mode and bonding property of 2OH-DAPhen with Ln(III) were investigated by 1H NMR titration, UV-vis spectrophotometric titration, luminescence titration, FT-IR, ESI-HRMS analysis, and DFT calculations. The results revealed that the predominant species formed in the aqueous phase was a 1:1 ligand/metal complex. DFT calculations also confirmed that the affinity of 2OH-DAPhen for Am(III) was better than that for Eu(III). The present work using a competitive extraction strategy developed a feasible alternative method for the selective separation of trivalent actinides from lanthanides.

New asymmetric tetradentate phenanthroline chelators with pyrazole and amide groups for complexation and solvent extraction of Ln(III)/Am(III)

To tune the complexation and solvent extraction performance of the ligands with a 1,10-phenanthroline core for trivalent actinides (An3+) and lanthanides (Ln3+), we synthesized two new asymmetric tetradentate ligands with pyrazole and amide groups, i.e., L1 (N,N-diethyl-9-(5-ethyl-1H-pyrazol-3-yl)-1,10-phenanthroline-2-carboxamide) and its analogue L2 with longer alkyl chains (N,N-dihexyl). The complexation of the ligands with Ln3+ was confirmed by 1H NMR titration and X-ray crystallography, and stability constants were measured in methanol by spectrophotometric titration. The asymmetric ligands exhibited an improved performance in terms of selective solvent extraction of Am3+ over Eu3+ in strongly acidic solutions compared to their symmetric analogues. The improved selectivity of the asymmetric ligands was interpreted theoretically by density functional theory simulations. This study implies that combining different functional groups to construct asymmetric ligands may be an efficient way to tune ligand performance with regard to An3+ separation from Ln3+.

f-Element heavy pnictogen chemistry

The coordination and organometallic chemistry of the f-elements, that is group 3, lanthanide, and actinide ions, supported by nitrogen ligands, e.g. amides, imides, and nitrides, has become well developed over many decades. In contrast, the corresponding f-element chemisty with the heavier pnictogen analogues phosphorus, arsenic, antimony, and bismuth has remained significantly underdeveloped, due largely to a lack of suitable synthetic methodologies and also the inherent hard(f-element)-soft(heavier pnictogen) acid-base mismatch, but has begun to flourish in recent years. Here, we review complexes containing chemical bonds between the f-elements and heavy pnictogens from phosphorus to bismuth that spans five decades of endeavour. We focus on complexes whose identity has been unambiguously established by structural authentication by single-crystal X-ray diffraction with respect to their synthesis, characterisation, bonding, and reactivity, in order to provide a representative overview of this burgeoning area. By highlighting that much has been achieved but that there is still much to do this review aims to inspire, focus and guide future efforts in this area.

4-Oxo-7-fluoro-1,10-phenanthroline-2,9-diamides: Synthesis, Structural Features, Lanthanide Complexes, and Am(III)/Ln(III) Solvent Extraction

A highly efficient synthetic approach was developed for the synthesis of unsymmetrical 1,10-phenanthroline-2,9-diamides with two different substituents in the fourth and seventh positions of the phenanthroline core. The structures of these ligands were confirmed using various spectral methods including 2D-NMR and X-ray analysis. Quantum chemical calculations supported the presence of tautomeric forms of these ligands. Furthermore, it was discovered that these compounds exhibit polydentate ligand behavior toward lanthanide nitrates. The structural characteristics of the complexes formed between these ligands and lanthanide nitrates were investigated both in the solid state and in solution. To further understand the binding properties of these novel unsymmetrical ligands, the binding constants for potential complexes were quantitatively measured by using UV-vis spectrophotometric titration. This allowed for a comprehensive analysis of the binding affinity and stability of these complexes. Extraction experiments of f-elements were performed for symmetrical and unsymmetrical diamides. Overall, this study presents significant advancement in the synthesis and characterization of unsymmetrical 1,10-phenanthroline-2,9-diamides and provides valuable insights into their potential applications as polydentate ligands for lanthanide nitrates.

Chemistry of Carbon-Substituted Derivatives of Cobalt Bis(dicarbollide)(1-) Ion and Recent Progress in Boron Substitution

The cobalt bis(dicarbollide)(1-) anion (1-), [(1,2-C2B9H11)2-3,3'-Co(III)](1-), plays an increasingly important role in material science and medicine due to its high chemical stability, 3D shape, aromaticity, diamagnetic character, ability to penetrate cells, and low cytotoxicity. A key factor enabling the incorporation of this ion into larger organic molecules, biomolecules, and materials, as well as its capacity for "tuning" interactions with therapeutic targets, is the availability of synthetic routes that enable easy modifications with a wide selection of functional groups. Regarding the modification of the dicarbollide cage, syntheses leading to substitutions on boron atoms are better established. These methods primarily involve ring cleavage of the ether rings in species containing an oxonium oxygen atom connected to the B(8) site. These pathways are accessible with a broad range of nucleophiles. In contrast, the chemistry on carbon vertices has remained less elaborated over the previous decades due to a lack of reliable methods that permit direct and straightforward cage modifications. In this review, we present a survey of methods based on metalation reactions on the acidic C-H vertices, followed by reactions with electrophiles, which have gained importance in only the last decade. These methods now represent the primary trends in the modifications of cage carbon atoms. We discuss the scope of currently available approaches, along with the stereochemistry of reactions, chirality of some products, available types of functional groups, and their applications in designing unconventional drugs. This content is complemented with a report of the progress in physicochemical and biological studies on the parent cobalt bis(dicarbollide) ion and also includes an overview of recent syntheses and emerging applications of boron-substituted compounds.

Polydentate N,O-Ligands Possessing Unsymmetrical Urea Fragments Attached to a p-Cresol Scaffold

In this study, three series of polydentate N,O-ligands possessing unsymmetrical urea fragments attached to a p-cresol scaffold are obtained, namely mono- and bi-substituted open-chain aromatics, synthesised using a common experiment, as well as fused aryloxazinones. Separate protocols for the preparation of each series are developed. It is found that in the case of open-chain compounds, the reaction output is strongly dependent on both bis-amine and carbamoyl chloride substituents, while oxazinones can be effectively obtained via a common protocol. The products are characterized via 1D and 2D NMR spectra in solution and using single-crystal XRD. A preliminary study on the coordination abilities of the products performed via ITC shows that there are no substantial interactions in the pH range of 5.0-8.5 in general.

Theoretical Study on the Coordination and Separation Capacity of Macrocyclic N-Donor Extractants for Am(III)/Eu(III)

Designing ligands that can effectively separate actinide An(III)/lanthanide Ln(III) in the solvent extraction process remains one of the key issues in the treatment of accumulated spent nuclear fuel. Nitrogen donor ligands are considered as promising extractants for the separation of An(III) and Ln(III) due to their environmental friendliness. Four new macrocyclic N-donor hexadentate extractants were designed and their coordination with Am(III) and Eu(III), as well as their extraction selectivity and separation performance for Am(III) and Eu(III), were investigated by scalar relativistic density functional theory. A variety of theoretical methods have been used to evaluate the properties of the four ligands and the coordination structures, bonding properties, and thermodynamic properties of the complexes formed by the four ligands with Am(III) and Eu(III). The results of various wavefunction analysis methods including NBO analysis, quantum theory of atoms in molecules (QTAIM) analysis, and so on show that Am(III) has a stronger coordination ability with the ligands than Eu(III) due to the Am 5f orbitals more involved in bonding with the ligands than the Eu 4f orbitals, and the bonding environment of the N-donor in the ligand has a significant effect on its coordination ability of the metal ions. Thermodynamic analysis of the solvent extraction process shows that all of the four N-containing macrocyclic ligands have good extraction selectivity and separation performance for Am(III) and Eu(III). This study provides theoretical support for designing potential nitrogen-containing macrocyclic extractants with excellent separation performance.

A Simple yet Efficient Hydrophilic Phenanthroline-Based Ligand for Selective Am(III) Separation under High Acidity

Highly selective hydrophilic ligands were believed to be an efficient way to overcome the massive amount of hazardous organic solvent used in the liquid-liquid extraction process and stood as a new frontier in the Lns(III)/Ans(III) partition. Current reported hydrophilic ligands suffer from harsh preparation conditions, inferior extraction performances, limited available chemical structures, and inability to carry out extraction under high acidity. In this article, we report a simple yet efficient carboxylic group modified phenanthroline-diimide ligand which displayed unexpected Lns(III)/Ans(III) and Ans(III)/Ans(III) separation capabilities in 1.5 M HNO3. Unique dimeric architectures for Eu(III) complexes were observed, which could be the origin of the outperforming selectivity and acid resistance. We believe this crystal engineering approach could inspire a renaissance in searching for new functional groups and coordination modes for efficient, high-acid-tolerance Lns(III)/Ans(III) separation ligands.

First 24-Membered Macrocyclic 1,10-Phenanthroline-2,9-Diamides-An Efficient Switch from Acidic to Alkaline Extraction of f-Elements

A reaction of acyl chlorides derived from 1,10-phenanthroline-2,9-dicarboxylic acids with piperazine allows the preparation of the corresponding 24-membered macrocycles in good yield. The structural and spectral properties of these new macrocyclic ligands were thoroughly investigated, revealing promising coordination properties towards f-elements (Am, Eu). It was shown that the prepared ligands can be used for selective extraction of Am(III) from alkaline-carbonate media in presence of Eu(III) with an SF_Am/Eu up to 40. Their extraction efficiency is higher than calixarene-type extraction of the Am(III) and Eu(III) pair. Composition of macrocycle-metal complex with Eu(III) was investigated by luminescence and UV-vis spectroscopy. The possibility of such ligands to form complexes of L:Eu = 1:2 stoichiometry is revealed.

Selective Complexation and Separation of Uranium(VI) from Thorium(IV) with New Tetradentate N,O-Hybrid Diamide Ligands: Synthesis, Extraction, Spectroscopy, and Crystallographic Studies

An unmet challenge in the thorium-uranium fuel cycle is the efficient separation of uranium from thorium. Herein, two new tetradentate N,O-hybrid ligands, N,N'-diethyl-N,N'-di-p-tolyl-2,2'-bipyridine-6,6'-dicarboxamide (Et-Tol-BPDA) and N,N'-diethyl-N,N'-di-p-tolyl-2,2'-bipyrimidine-4,4'-dicarboxamide (Et-Tol-BPymDA), comprising a bipyridine or bipyrimidine core and amide moieties were designed and synthesized for selectively complexing and separating U(VI) from Th(IV). The high U(VI)/Th(IV) extraction selectivity was achieved by Et-Tol-BPDA (SF_U/Th = 33 at 3 M HNO₃) and Et-Tol-BPymDA (SF_U/Th = 73 at 3 M HNO₃) in nitric acid solutions. The extraction process for U(VI) or Th(IV) with these two ligands primarily proceeded through the solvation mechanism, as evidenced by slope analyses. Thermodynamic studies for the extraction of U(VI) and Th(IV) revealed a spontaneous process. Results from UV-vis spectroscopic titration and slope analyses demonstrated that U(VI) and Th(IV) each form a 1:1 complex with the two ligands both in the monophasic organic solution and the biphasic extraction system. The stability constants of the 1:1 complexes of Et-Tol-BPDA or Et-Tol-BPymDA with U(VI) were found to be larger than those with Th(IV), which coincide well with the high U(VI)/Th(IV) extraction selectivity. The solid-state structures of Et-Tol-BPDA, Et-Tol-BPymDA, and 1:1 complexes of the two ligands with U(VI) or Th(IV) were analyzed by X-ray diffraction technique. The results from this work implicate the potential of bipyridine- and bipyrimidine-derived diamide ligands for uranium/thorium separation.

3-Methyl-1-phenyl-4-thioacetylpyrazol-5-one

The novel compound 3-methyl-1-phenyl-4-thioacetylpyrazol-5-one is obtained in excellent yield via a thionation of the corresponding oxygen analogue. The product is isolated in pure form using column chromatography and is characterised using 1D and 2D NMR experiments, ATR IR and HRMS spectra, and single-crystal XRD.

Theoretical Insights into the Substitution Effect of Phenanthroline Derivatives on Am(III)/Eu(III) Separation

Separation of trivalent actinides (An(III)) and lanthanides (Ln(III)) poses a huge challenge in the reprocessing of spent nuclear fuel due to their similar chemical properties. N,N'-Diethyl-N,N'-ditolyl-2,9-diamide-1,10-phenanthroline (Et-Tol-DAPhen) is a potential ligand for the extraction of An(III) from Ln(III), while there are still few reports on the effect of its substituent including electron-withdrawing and electron-donating groups on An(III)/Ln(III) separation. Herein, the interaction of Et-Tol-DAPhen ligands modified by the electron-withdrawing groups (CF₃, Br) and electron-donating groups (OH) with Am(III)/Eu(III) ions was investigated using scalar relativistic density functional theory (DFT). The analyses of bond order, quantum theory of atoms in molecules (QTAIM), and molecular orbital (MO) indicate that the substitution groups have a slight effect on the electronic structures of the [M(L-X)(NO₃)₃] (X = CF₃, Br, OH) complexes. However, the thermodynamic results suggest that a ligand with the electron-donating group (L-OH) improves the extraction ability of metal ions, and the ligand modified by the electron-withdrawing group (L-Br) has the best Am(III)/Eu(III) selectivity. This work could render new insights into understanding the effect of electron-withdrawing and electron-donating groups in tuning the selectivity of Et-Tol-DAPhen derivatives and pave the way for designing new ligands modified by substituted groups with better extraction ability and An(III)/Ln(III) selectivity.

Simple, Fast, and Selective Dissolution of Eu2O3 in an Ionic Liquid as a Sustainable Paradigm for Lanthanide-Actinide Separations in Radioactive Waste Remediation

The liquid-liquid extraction (LLE) process for lanthanide-actinide separation from the nuclear fuel cycle has several drawbacks such as, the requirement of cooling for decay heat control, the handling of large volumes of toxic volatile organic compounds (VOCs), and secondary waste generation. Alternatively reprocessing without spent fuel cooling is done by pyroprocessing, which uses high-temperature corrosive molten salts and requires elevated temperature, and is an energy-intensive process. In recent years, some of the shortcomings of both LLE and pyroprocessing are overcome by the use of room temperature ionic liquids (RTILs) as the solvents. In the present work, an attempt was made to exploit the potential of the neoteric, less-corrosive, low-VOC RTILs toward direct dissolution-based separations at ambient conditions. The present paper involves the selective dissolution of Eu₂O₃ in an RTIL, i.e., C₄mim·NTf₂ containing 2-thenoyltrifluoroacetone (HTTA) within ca. 30 min at ambient conditions; while the dissolution of AmO₂ and UO₂ were found to be very poor, making this an attractive method for lanthanide-actinide separation, a key step in radioactive waste management, i.e., an actinide partitioning and transmutation strategy. The quantitative dissolution of Eu₂O₃ from simulated spent nuclear fuel with different Eu₂O₃ loading was also shown. Water plays a crucial role in deciding the kinetics of dissolution and amount of the dissolved oxide. The combination of X-ray absorption, fluorescence, and UV-vis spectroscopic studies suggested the formation of the dehydrated anionic complex Ln(TTA)₄^- to play pivotal role in the oxide dissolution process. The structure of the complex was analyzed by density functional theory and extended X-ray absorption fine structure. The mechanism of oxide dissolution was proposed and electrochemical studies were performed to understand the possible recovery option using electrodeposition of the dissolved Eu³⁺.

Solvent Extraction and Conformation Rigidity: Actinide(IV) and Actinide(VI) Come Together

The first comprehensive structural and extraction study of a 2,2'-bipyridine-6,6'-dicarboxamide (L diamide) extractant for U, Np, Pu, Th, Am, and Eu ions showed great potential for actinide separation due to steric hindrance of the amidic side phenyl ring of the given compound. The study of the complexes of An(VI) and Th(IV) with 2,2'-bipyridyldicarboxamide-type extractants demonstrated the structure of the extraction species for the first time. Investigation of the extraction properties with the radiometric and millimolar quantities of actinides showed similar extraction trends. For the first time, a metal-ion-induced phenyl-ring rotation restriction was found for the U, Th, and Eu complexes by employing temperature-dependent dynamic NMR. A study of the solution behavior of the complexes accompanied by density functional theory modeling studies elucidated the mechanism of the unusual C-N bond rotation restriction induced by metal coordination.

Competing Routes in the Extraction of Lanthanide Nitrates by 1,10-Phenanthroline-2,9-diamides: An Impact of Structure of Complexes on the Extraction

The fact of the fracture of the extraction curve of lanthanides by 1,10-phenanthroline-2,9-diamides is explained in terms of the structure of complexes, solvent extraction data and quantum chemical calculations. The solvent extraction proceeds in two competing directions: in the form of neutral complexes LLn(NO₃)₃ and in the form of tight ion pairs {[LLn(NO₃)₂ H₂O]⁺ (NO₃^-).

Quantifying the Influence of Covalent Metal-Ligand Bonding on Differing Reactivity of Trivalent Uranium and Lanthanide Complexes

Qualitative differences in the reactivity of trivalent lanthanide and actinide complexes have long been attributed to differences in covalent metal-ligand bonding, but there are few examples where thermodynamic aspects of this relationship have been quantified, especially with U³⁺ and in the absence of competing variables. Here we report a series of dimeric phosphinodiboranate complexes with trivalent f-metals that show how shorter-than-expected U-B distances indicative of increased covalency give rise to measurable differences in solution deoligomerization reactivity when compared to isostructural complexes with similarly sized lanthanides. These results, which are in excellent agreement with supporting DFT and QTAIM calculations, afford rare experimental evidence concerning the measured effect of variations in metal-ligand covalency on the reactivity of trivalent uranium and lanthanide complexes.

Surface ion-imprinted brewer's spent grain with low template loading for selective uranyl ions adsorption from simulated wastewater

Efficient removal of uranyl ions from wastewater requires excellent selectivity of the adsorbents. Herein, we report a new strategy using a high monomer/template molar ratio of 500:1 to prepare surface ion-imprinted brewer's spent grain (IIP-BSG) for selective U(VI) removal using binary functional monomers (2-hydroxyethyl methacrylate and diethyl vinylphosphonate) with high site accessibility and easy template removal. IIP-BSG exhibits a maximum U(VI) adsorption capacity of 165.7 mg/g, a high selectivity toward U(VI) in the presence of an excess amount of Eu(III) (Eu/U molar ratio = 20), a good tolerance of salinity, and a high reusability. In addition, mechanism studies have revealed electrostatic interaction and a coordination of uranyl ions by carboxyl and phosphoryl groups, the predominant contribution of high-energy (specific) sites during selective adsorption, and internal mass transfer as the rate-controlling step of U(VI) adsorption. Furthermore, IIP-BSG shows great potentials to separate U(VI) from lanthanides in simulated nuclear wastewater (pH₀ = 3.5) and selectively concentrate U(VI) from simulated mine water (pH₀ = 7.1). This study proves that the ion-imprinting effect can be achieved using a very low template amount with reduced production cost and secondary pollution, which benefits large-scale promotion of the ion-imprinted materials for selective uranyl ions removal.

Pyridine-di-phosphonates as chelators for trivalent f-elements: kinetics, thermodynamic and interfacial study of Am(III)/Eu(III) solvent extraction

The fractionation of high-level radioactive waste from nuclear power plants simplifies the handling of its components, and facilitates the reduction of radiotoxic effects on the environment. The search and study of new ligands for solvent extraction, as one of the methods in fractionation, remains a complex and important research task. In this work, four pyridine diphosphonate ligands were synthesized. These ligands are part of the class of the N,O-donor extractants, which are selective towards Am(III). The separation factor SF(Am/Eu) for the best extractant reached values up to 10. The influence of the substituents on the efficiency of extraction and complexation of trivalent f-elements, the kinetics of extraction, and the behavior of the ligand at the interface were described. The effect of nitric acid concentration on the extraction was shown. The stoichiometry of the complexes was determined by slope analysis in solvent extraction experiment and verified by spectrophotometric titration in acetonitrile. Liquid tension experiments with a pendant drop method revealed the interfacial properties of the ligands in "F-3 solvent/H₂O" and "F-3 solvent/HNO₃" systems. The relationship between the surface activity and the ligand structure was shown. Studies of the extraction kinetics were performed in a modified Lewis cell. The effect of the ligand structure on the extraction rate was shown. The DFT calculation with the B3LYP density functional was used to explain the extraction properties of the ligands, including selectivity. The calculation of the pre-organization energy of the ligands explained the kinetics and extraction patterns for the studied series.

First Example of Fluorinated Phenanthroline Diamides: Synthesis, Structural Study, and Complexation with Lanthanoids

An efficient approach to the synthesis of diamides of 4,7-difluoro-1,10-phenanthroline-2,9-dicarboxylic acid was elaborated. Direct nucleophilic substitution with 4,7-dichloro-1,10-phenanthroline precursors opened access to difluoro derivatives in high yield. As a result, four new fluorinated ligands were prepared in up to 88% yield. Their structure was proved by a combination of spectral methods and X-ray data. A set of lanthanoid complexes was prepared to demonstrate the utility of new ligands. The structure of the complexes was studied in solid state (IR-spectroscopy, X-ray diffraction) and in solution (NMR-spectroscopy).