Morphology dependent catalysis and surface enhanced Raman scattering (SERS) studies using Pd nanostructures in DNA, CTAB and PVA scaffolds

Magnesium Nanoparticles for Surface-Enhanced Raman Scattering and Plasmon-Driven Catalysis

Nanostructures of some metals can sustain localized surface plasmon resonances, collective oscillations of free electrons excited by incident light. This effect results in wavelength-dependent absorption and scattering, enhancement of the incident electric field at the metal surface, and generation of hot carriers as a decay product. The enhanced electric field can be utilized to amplify the spectroscopic signal in surface-enhanced Raman scattering (SERS), while hot carriers can be exploited for catalytic applications. In recent years, cheaper and more earth abundant alternatives to traditional plasmonic Au and Ag have gained growing attention. Here, we demonstrate the ability of plasmonic Mg nanoparticles to enhance Raman scattering and drive chemical transformations upon laser irradiation. The plasmonic properties of Mg nanoparticles are characterized at the bulk and single particle level by optical spectroscopy and scanning transmission electron microscopy coupled with electron energy-loss spectroscopy and supported by numerical simulations. SERS enhancement factors of ∼102 at 532 and 633 nm are obtained using 4-mercaptobenzoic acid and 4-nitrobenzenethiol. Furthermore, the reductive coupling of 4-nitrobenzenethiol to 4,4'-dimercaptoazobenzene is observed on the surface of Mg nanoparticles under 532 nm excitation in the absence of reducing agents, indicating a plasmon-driven catalytic process. Once decorated with Pd, Mg nanostructures display an enhancement factor of 103 along with an increase in the rate of catalytic coupling. The results of this study demonstrate the successful application of plasmonic Mg nanoparticles in sensing and plasmon-enhanced catalysis.

Trends in Application of SERS Substrates beyond Ag and Au, and Their Role in Bioanalysis

This article compares the applications of traditional gold and silver-based SERS substrates and less conventional (Pd/Pt, Cu, Al, Si-based) SERS substrates, focusing on sensing, biosensing, and clinical analysis. In recent decades plethora of new biosensing and clinical SERS applications have fueled the search for more cost-effective, scalable, and stable substrates since traditional gold and silver-based substrates are quite expensive, prone to corrosion, contamination and non-specific binding, particularly by S-containing compounds. Following that, we briefly described our experimental experience with Si and Al-based SERS substrates and systematically analyzed the literature on SERS on substrate materials such as Pd/Pt, Cu, Al, and Si. We tabulated and discussed figures of merit such as enhancement factor (EF) and limit of detection (LOD) from analytical applications of these substrates. The results of the comparison showed that Pd/Pt substrates are not practical due to their high cost; Cu-based substrates are less stable and produce lower signal enhancement. Si and Al-based substrates showed promising results, particularly in combination with gold and silver nanostructures since they could produce comparable EFs and LODs as conventional substrates. In addition, their stability and relatively low cost make them viable alternatives for gold and silver-based substrates. Finally, this review highlighted and compared the clinical performance of non-traditional SERS substrates and traditional gold and silver SERS substrates. We discovered that if we take the average sensitivity, specificity, and accuracy of clinical SERS assays reported in the literature, those parameters, particularly accuracy (93-94%), are similar for SERS bioassays on AgNP@Al, Si-based, Au-based, and Ag-based substrates. We hope that this review will encourage research into SERS biosensing on aluminum, silicon, and some other substrates. These Al and Si based substrates may respond efficiently to the major challenges to the SERS practical application. For instance, they may be not only less expensive, e.g., Al foil, but also in some cases more selective and sometimes more reproducible, when compared to gold-only or silver-only based SERS substrates. Overall, it may result in a greater diversity of applicable SERS substrates, allowing for better optimization and selection of the SERS substrate for a specific sensing/biosensing or clinical application.

Hierarchical Design in Nanoporous Metals

Hierarchically porous metals possess intriguing high accessibility of matter molecules and unique continuous metallic frameworks, as well as a high level of exposed active atoms. High rates of diffusion and fast energy transfer have been important and challenging goals of hierarchical design and porosity control with nanostructured metals. This review aims to summarize recent important progress toward the development of hierarchically porous metals, with special emphasis on synthetic strategies, hierarchical design in structure-function and corresponding applications. The current challenges and future prospects in this field are also discussed.

In vitro and in vivo MRI imaging and photothermal therapeutic properties of Hematite (α-Fe2O3) Nanorods

Herein we report synthesis of hematite (α-Fe2O3) nanorods by calcinating hydrothermally synthesized goethite nanorods at 5000C. The structural, optical and MRI imaging guided cancer therapeutic properties of fabricated nanorods have been discussed in this manscript. FESEM and TEM imaging techniques were used to confirm the nanorod like morphology of as prepared materials. As we know that Fe2O3 nanorods with size in the range of 25-30 nm exhibit super magnetism. After coating with the PEG, the as prepared nanorods can be used as T2 MR imaging contrast agents. An excellent T2 MRI contrast of 38.763 mM-1s-1 achieved which is highest reported so far for α-Fe2O3. Besides the as prepared nanorods display an excellent photothermal conversion efficiency of 39.5% thus acts as an excellent photothermal therapeutic agent. Thus, we envision the idea of testing our nanorods for photothermal therapy and MR imaging application both in vitro and in vivo, achieving an excellent T2 MRI contrast and photothermal therapy effect with as prepared PEGylated nanorods.

Facile synthesis of Au@palladium oxide nano-sunflowers for ultrasensitive surface-enhanced Raman scattering analysis

Metal-semiconductor nanocomposites have gain more and more attention as novel surface-enhanced Raman scattering (SERS) substrates due to the coupling Raman enhancement mechanism between the nanocomponents. Herein, Au@palladium oxide (Au@PdOx) nanohybrids...

Surface-Enhanced Raman Scattering Activity of ZrO2 Nanoparticles: Effect of Tetragonal and Monoclinic Phases

The effect of the ZrO₂ crystal form on surface-enhanced Raman scattering (SERS) activity was studied. The ratio of the tetragonal (T) and monoclinic (M) phases of ZrO₂ nanoparticles (ZrO₂ NPs) was controlled by regulating the ratio of two types of additives in the hydrothermal synthesis method. The SERS intensity of 4-mercaptobenzoic acid (4–MBA) was gradually enhanced by changing the M and T phase ratio in ZrO₂ NPs. The degree of charge transfer (CT) in the enhanced 4–MBA molecule was greater than 0.5, indicating that CT was the main contributor to SERS. The intensity of SERS was strongest when the ratio of the T crystal phase in ZrO₂ was 99.7%, and the enhancement factor reached 2.21 × 10⁴. More importantly, the proposed study indicated that the T and M phases of the ZrO₂ NPs affected the SERS enhancement. This study provides a new approach for developing high-quality SERS substrates and improving the transmission efficiency of molecular sensors.

Prospects in interfaces of biomolecule DNA and nanomaterials as an effective way for improvising surface enhanced Raman scattering: A review

Surface Enhanced Raman Scattering (SERS) is a field of research that has shown promising application in the analysis of various substrate molecules by means of rough metallic surfaces. In directing the enhancement of substrate molecules in micro and nano-molar concentrations, plasmonic coupling of metal nanoparticles (NPs), morphology of metal NPs and the closely arrangement of rough metal surfaces that produces 'hot spots' can effectively increase the so-called enhancement factor (EF) that will be applicable in various fields. As the mechanistic aspects are still not clear, research has been triggered all over the world for the past two decades to have a clear understanding in chemical and electromagnetic effects. As the reproducibility of intensity of signals at low concentrations of probe molecules is of a big concern, metal NPs with various scaffolds were prepared and recently bio-molecule, DNA has been studied and showed promising advantages. This review first time highlights metal NPs with DNA interface as an effective rough metallic surface for SERS with high intensity and also with better reproducibility. Based on this review, similar kinds of scaffolds like DNA can be used to further analyze SERS activities of various metal NPs with different morphologies to have high intense signals at low concentrations of probe molecules.

Pd nanoparticles as a plasmonic material: synthesis, optical properties and applications

This review provides an overview of current progress in Pd nanoparticles supporting localized surface plasmon resonance and their applications. We begin by analyzing briefly the optical properties of Pd putting particular focus on outlining the origin of its size- and shape-dependent LSPR, high refractive index sensitivity, and high absorption contribution. The differences in the optical behavior with Au and Ag, the primary plasmonic materials, are highlighted. The main strategies to synthesize Pd nanoparticles, pure or hybrid, with well-defined optical properties are then reviewed. In this section, we include only those works that carry out the study of the optical properties of the nanoparticles. The applications of plasmonic Pd nanoparticles are also discussed in detail. This review is concluded with a section devoted to the future perspectives highlighting the most relevant challenges to be addressed to take Pd nanoparticles from the laboratory to real applications.

Developments in DNA metallization strategies for water splitting electrocatalysis: A review

The biomolecule DNA with the presence of different functionalities found to interact with different kinds of metal ions and show relatively higher stability over a long period of time when optimized appropriately. With the presence of A-T and G-C pairs, sugar moieties, phosphate functional groups and the double-helical structure, it can assemble both cationic and anionic species and forms a perfect metal-DNA self-assembly. Depending upon the aspect ratio of metal-DNA self-assemblies, metal content and their morphological outcomes, they could deliver variance in the catalytic activities. Such differences can be brought out by varying the synthesis reaction parameters focusing on a specific electrocatalytic application. In this review, recent developments in DNA metallization is elaborated first highlighting the underlying interactions between DNA and cationic/anionic species of various metals following which application of metal-DNA assemblies in electrocatalytic water oxidation and reduction are discussed critically. Knowledge provided in this review thus acts as the guide to various DNA metallization strategies and their subsequent application to water electrolysis for hydrogen generation.

Morphology Evolution of Nanoscale-Thick Au/Pd Bimetallic Films on Silicon Carbide Substrate

Bimetallic Au/Pd nanoscale-thick films were sputter-deposited at room temperature on a silicon carbide (SiC) surface, and the surface-morphology evolution of the films versus thickness was studied with scanning electron microscopy. This study allowed to elucidate the Au/Pd growth mechanism by identifying characteristic growth regimes, and to quantify the characteristic parameters of the growth process. In particular, we observed that the Au/Pd film initially grew as three-dimensional clusters; then, increasing Au/Pd film thickness, film morphology evolved from isolated clusters to partially coalesced wormlike structures, followed by percolation morphology, and, finally, into a continuous rough film. The application of the interrupted coalescence model allowed us to evaluate a critical mean cluster diameter for partial coalescence, and the application of Vincent's model allowed us to quantify the critical Au/Pd coverage for percolation transition.

Preparation of CdS-TiO2-Based Palladium Heterogeneous Nanocatalyst by Solvothermal Route and Its Catalytic Activity for Reduction of Nitroaromatic Compounds

In this study, bare CdS nanoparticles (NPs) were prepared by solvothermal method using CdCl₂(3-methylbenzaldehyde thiosemicarbazone)₂ as a single-source molecular precursor in the presence of ethylene glycol. Further, these CdS NPs were used for the preparation of binary (CdS-TiO₂) and ternary (CdS-TiO₂/Pd) heterogeneous nanocatalysts. Characterization of the as-prepared nanocatalysts has been carried out using different techniques such as powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy, and photoluminescence studies. The peak observed at 2θ = 39.5° in XRD confirms the successful doping of noble metal (Pd) on the surface of CdS-TiO₂ nanocatalyst, which is well supported by Raman analysis. From FESEM and TEM analyses, mixed morphology has been observed and elemental composition was confirmed by energy-dispersive X-ray spectroscopy elemental mapping. Furthermore, the as-prepared bare CdS NPs, binary CdS-TiO₂, and ternary CdS-TiO₂/Pd heterogeneous nanocatalysts were used for the reductive transformation of various nitroaromatic compounds to their corresponding aromatic amines at room temperature. It has been observed that among all of the catalysts, ternary CdS-TiO₂/Pd heterogeneous nanocatalyst has excellent catalytic property to reduce all nitroaromatic compounds in very short time span.

Yolk-Shell Fe/Fe4 N@Pd/C Magnetic Nanocomposite as an Efficient Recyclable ORR Electrocatalyst and SERS Substrate

A yolk-shell Fe/Fe₄ N@Pd/C (FFPC) nanocomposite is synthesized successfully by two facile steps: interfacial polymerization and annealing treatment. The concentration of Pd²⁺ is the key factor for the density of Pd nanoparticles (Pd NPs) embedded in the carbon shells, which plays a role in the oxygen reduction reaction (ORR) and surface-enhanced Raman scattering (SERS) properties. The ORR and SERS performances of FFPC nanocomposites under different concentrations of PdCl₂ are investigated. The optimal ORR performance exhibits that onset potential and tafel slope can reach 0.937 V (vs reversible hydrogen electrode (RHE)) and 74 mV dec^-1 , respectively, which is attributed to the synergistic effects of good electrical conductivity, large electrochemically active areas, and strong interfacial charge polarization. Off-axis electron holography reveals that interfacial charge polarization could facilitate the ORR of Pd NPs and defective carbon simultaneously and the shell with low density of Pd NPs is easier to form strong interfacial charge polarization. Moreover, FFPC-3 with maximum EF of 2.3 × 10⁵ results from more hot-spots, local positive charge centers to attract rhodamine 6G molecules, and magnetic cores. This work not only offers a recyclable multifunctional nanocomposite with excellent performance, but also has instructional implications for interfacial engineering for electrocatalysts design.

Cobalt tungsten oxide hydroxide hydrate (CTOHH) on DNA scaffold: an excellent bi-functional catalyst for oxygen evolution reaction (OER) and aromatic alcohol oxidation

CTOHH-DNA, a newly developed catalyst utilized for both electrocatalytic OER and aromatic alcohol oxidation reaction with excellent activities.

One-Pot Synthesis of Pd-Based Ternary Pd@CdS@TiO2 Nanoclusters via a Solvothermal Route and Their Catalytic Reduction Efficiency toward Toxic Hexavalent Chromium

In this work, we report the synthesis of Pd-based ternary Pd@CdS@TiO₂ nanocomposites using molecular precursors. This method is facile, less time-consuming, and cost-effective. This catalyst is prepared within 2 h by a solvothermal route using molecular precursors. Information about the phase, morphologies, elemental mapping, and composition of the nanocomposites was obtained using various characterization techniques. The catalytic activity of the as-prepared Pd-based ternary Pd@CdS@TiO₂ nanocomposites exhibits effective reduction efficiency for the conversion of toxic Cr(VI) to Cr(III) using formic acid as a reducing agent within 5-7 min. To the best of our knowledge, this is the first report on Pd-based ternary Pd@CdS@TiO₂ nanocomposites prepared by a solvothermal route and used as catalysts toward the reduction of hexavalent chromium at room temperature.

A simple way to synthesize large-scale Cu2O/Ag nanoflowers for ultrasensitive surface-enhanced Raman scattering detection

Here, we report a simple strategy to prepare highly sensitive surface-enhanced Raman spectroscopy (SERS) substrates based on Ag decorated Cu₂O nanoparticles by combining two common techniques, viz, thermal oxidation growth of Cu₂O nanoparticles and magnetron sputtering fabrication of a Ag nanoparticle film. Methylene blue is used as the Raman analyte for the SERS study, and the substrates fabricated under optimized conditions have very good sensitivity (analytical enhancement factor ∼10⁸), stability, and reproducibility. A linear dependence of the SERS intensities with the concentration was obtained with an R ² value >0.9. These excellent properties indicate that the substrate has great potential in the detection of biological and chemical substances.

Pt nanoparticle tethered DNA assemblies for enhanced catalysis and SERS applications

Synthesized Pt NPs tethered on DNA showed good catalytic activity and act as a potential substrate for SERS studies.