Taming 2,2'-biimidazole ligands in trivalent chromium complexes

Complete or partial replacement of well-known five-membered chelating 2,2'-bipyridine (bipy) or 1,10-phenanthroline (phen) ligands with analogous didentate 2,2'-biimidazole (H2biim) provides novel perspectives for exploiting the latter pH-tuneable bridging unit for connecting inert trivalent chromium with cationic partners. The most simple homoleptic complex [Cr(H2biim)3]3+ and its stepwise deprotonated analogues are only poorly soluble in most solvents and their characterization is limited to some solid-state structures, in which the pseudo-octahedral [CrN6] units are found to be intermolecularly connected via peripheral N-H⋯X hydrogen bonds. Moreover, the associated high-energy stretching N-H vibrations drastically quench the targeted near infrared (NIR) CrIII-based phosphorescence, which makes these homoleptic building blocks incompatible with the design of molecular-based luminescent assemblies. Restricting the number of bound 2,2'-biimidazole ligands to a single unit in the challenging heteroleptic [Cr(phen)2(Hxbiim)](1+x)+ (x = 2-0) complexes overcomes the latter limitations and allows (i) the synthesis and characterization of these [CrN6] chromophores in the solid state and in solution, (ii) the stepwise and controlled deprotonation of the bound 2,2'-biimidazole ligand and (iii) the implementation of Cr-centered phosphorescence with energies, lifetimes and quantum yields adapted for using the latter chromophores as sensitizers in promising 'complex-as-ligand' strategies.

Ferromagnetically Coupled Chromium(III) Dimer Shows Luminescence and Sensitizes Photon Upconversion

There has been much progress on mononuclear chromium(III) complexes featuring luminescence and photoredox activity, but dinuclear chromium(III) complexes have remained underexplored in these contexts until now. We identified a tridentate chelate ligand able to accommodate both meridional and facial coordination of chromium(III), to either access a mono- or a dinuclear chromium(III) complex depending on reaction conditions. This chelate ligand causes tetragonally distorted primary coordination spheres around chromium(III) in both complexes, entailing comparatively short excited-state lifetimes in the range of 400 to 800 ns in solution at room temperature and making photoluminescence essentially oxygen insensitive. The two chromium(III) ions in the dimer experience ferromagnetic exchange interactions that result in a high spin (S=3) ground state with a coupling constant of +9.3 cm-1. Photoinduced energy transfer from the luminescent ferromagnetically coupled dimer to an anthracene derivative results in sensitized triplet-triplet annihilation upconversion. Based on these proof-of-principle studies, dinuclear chromium(III) complexes seem attractive for the development of fundamentally new types of photophysics and photochemistry enabled by magnetic exchange interactions.

Additional Insights into the Design of Cr(III) Phosphorescent Emitters Using 6-Membered Chelate Ring Bis(imidazolyl) Didentate Ligands

The interest in Cr(III) complexes has been renewed over the past decades for building practical guidelines in the design of efficient earth-abundant phosphorescent near-infrared emitters. In that context, we report the first family of homoleptic tri(didentate) Cr(III) complexes [CrL3]3+ based on polyaromatic ligands inducing 6-membered chelate rings, namely, the bis(1-methylimidazol-2-yl)ketone (L = bik), bis(1-methylimidazol-2-yl)methane (L = bim), and bis(1-methylimidazol-2-yl)ethane (L = bie) ligands. The programmed close-to-perfect octahedral microsymmetry of {CrIIIN6} chromophores found in [Cr(bik)3](OTf)3 (1), [Cr(bim)3](OTf)3 (2), and [Cr(bie)3](BF4)3 (3) ensures a ligand-field strength large enough to induce intense and long-lived Cr-based phosphorescence. Impressive excited-state lifetimes (5.0-8.2 ms) were obtained at low temperatures for the [Cr(L)3]3+ series. Additionally, the photoluminescent quantum yield climbs to 0.8% for compound 1 in deaerated solutions. Moreover, the photophysical features of the three homoleptic complexes are barely influenced by the presence of dioxygen presumably because of the poor overlap between the Cr-based phosphorescence spectra (ca. 14100 cm-1) and the 1Σg+ ← 3Σg- transition in the absorption spectrum of dioxygen (13100 cm-1). The multiredox electrochemical pattern of 1 is evidenced by cyclic voltammetry as well as its strong photooxidant behavior. The pH sensitivity of 2 and 3 luminescence is discussed, along with the reactivity of their β-diketiminate derivatives.

Electronic Structure and Excited-State Dynamics of the NIR-II Emissive Molybdenum(III) Analogue to the Molecular Ruby

Photoactive chromium(III) complexes saw a conceptual breakthrough with the discovery of the prototypical molecular ruby mer-[Cr(ddpd)2]3+ (ddpd = N,N'-dimethyl-N,N'-dipyridin-2-ylpyridine-2,6-diamine), which shows intense long-lived near-infrared (NIR) phosphorescence from metal-centered spin-flip states. In contrast to the numerous studies on chromium(III) photophysics, only 10 luminescent molybdenum(III) complexes have been reported so far. Here, we present the synthesis and characterization of mer-MoX3(ddpd) (1, X = Cl; 2, X = Br) and cisfac-[Mo(ddpd)2]3+ (cisfac-[3]3+), an isomeric heavy homologue of the prototypical molecular ruby. For cisfac-[3]3+, we found strong zero-field splitting using magnetic susceptibility measurements and electron paramagnetic resonance spectroscopy. Electronic spectra covering the spin-forbidden transitions show that the spin-flip states in mer-1, mer-2, and cisfac-[3]3+ are much lower in energy than those in comparable chromium(III) compounds. While all three complexes show weak spin-flip phosphorescence in NIR-II, the emission of cisfac-[3]3+ peaking at 1550 nm is particularly low in energy. Femtosecond transient absorption spectroscopy reveals a short excited-state lifetime of 1.4 ns, 6 orders of magnitude shorter than that of mer-[Cr(ddpd)2]3+. Using density functional theory and ab initio multireference calculations, we break down the reasons for this disparity and derive principles for the design of future stable photoactive molybdenum(III) complexes.

Metal Complexes as Antifungals? From a Crowd-Sourced Compound Library to the First In Vivo Experiments

There are currently fewer than 10 antifungal drugs in clinical development, but new fungal strains that are resistant to most current antifungals are spreading rapidly across the world. To prevent a second resistance crisis, new classes of antifungal drugs are urgently needed. Metal complexes have proven to be promising candidates for novel antibiotics, but so far, few compounds have been explored for their potential application as antifungal agents. In this work, we report the evaluation of 1039 metal-containing compounds that were screened by the Community for Open Antimicrobial Drug Discovery (CO-ADD). We show that 20.9% of all metal compounds tested have antimicrobial activity against two representative Candida and Cryptococcus strains compared with only 1.1% of the >300,000 purely organic molecules tested through CO-ADD. We identified 90 metal compounds (8.7%) that show antifungal activity while not displaying any cytotoxicity against mammalian cell lines or hemolytic properties at similar concentrations. The structures of 21 metal complexes that display high antifungal activity (MIC ≤1.25 μM) are discussed and evaluated further against a broad panel of yeasts. Most of these have not been previously tested for antifungal activity. Eleven of these metal complexes were tested for toxicity in the Galleria mellonella moth larva model, revealing that only one compound showed signs of toxicity at the highest injected concentration. Lastly, we demonstrated that the organo-Pt(II) cyclooctadiene complex Pt1 significantly reduces fungal load in an in vivo G. mellonella infection model. These findings showcase that the structural and chemical diversity of metal-based compounds can be an invaluable tool in the development of new drugs against infectious diseases.

Complex-as-Ligand Strategy as a Tool for the Design of a Binuclear Nonsymmetrical Chromium(III) Assembly: Near-Infrared Double Emission and Intramolecular Energy Transfer

The chromium(III) polypyridyl complexes are appealing for their long-lived near-infrared (NIR) emission reaching the millisecond range and for the strong circularly polarized luminescence of their isolated enantiomers. However, harnessing those properties in functional polynuclear Cr^III devices remains mainly inaccessible because of the lack of synthetic methods for their design and functionalization. Even the preparation and investigation of most basic nonsymmetrical Cr^III dyads exhibiting directional intramolecular intermetallic energy transfer remain unexplored. Taking advantage of the inertness of heteroleptic chromium(III) polypyridyl building blocks, we herein adapt the "complex-as-ligand" strategy, largely used with precious 4d and 5d metals, for the preparation of a binuclear nonsymmetrical Cr^III complex (3d metal). The resulting [(phen)₂Cr(L)Cr(tpy)]⁶⁺ dyad shows dual long-lived NIR emission and a directional intermetallic energy transfer that is controlled by the specific arrangements of the different coordination spheres. This strategy opens a route for building predetermined polynuclear assemblies with this earth-abundant metal.

Heteroleptic mer-[Cr(N∩N∩N)(CN)3] complexes: synthetic challenge, structural characterization and photophysical properties

The substitution of three water molecules around trivalent chromium in CrBr₃·6H₂O with the tridentate 2,2′:6′,2′′-terpyridine (tpy), N,N′-dimethyl-N,N′-di(pyridine-2-yl)pyridine-2,6-diamine (ddpd) or 2,6-di(quinolin-8-yl)pyridine (dqp) ligands gives the heteroleptic mer-[Cr(L)Br₃] complexes. Stepwise treatments with Ag(CF₃SO₃) and KCN under microwave irradiations provide mer-[Cr(L)(CN)₃] in moderate yields. According to their X-ray crystal structures, the associated six-coordinate meridional [CrN₃C₃] chromophores increasingly deviate from a pseudo-octahedral arrangement according to L = ddpd ≈ dpq ≪ tpy; a trend in line with the replacement of six-membered with five-membered chelate rings around Cr^III. Room-temperature ligand-centered UV-excitation at 18 170 cm⁻¹ (λ_exc = 350 nm), followed by energy transfer and intersystem crossing eventually yield microsecond metal-centered Cr(²E → ⁴A₂) phosphorescence in the red to near infrared domain 13 150–12 650 cm⁻¹ (760 ≤ λ_em ≤ 790 nm). Decreasing the temperature to liquid nitrogen (77 K) extends the emission lifetimes to reach the millisecond regime with a record of 4.02 ms for mer-[Cr(dqp)(CN)₃] in frozen acetonitrile.

The heteroleptic mer-[Cr(L)(CN)₃] (L = tpy, ddpd, dqp) complexes with their C_2v-symmetrical [CrC₃N₃] luminescent chromophores represent the missing links between pseudo-octahedral [CrN₆] and [CrC₆] units found in their well-known homoleptic parents.

Spin-flip luminescence

In molecular photochemistry, charge-transfer emission is well understood and widely exploited. In contrast, luminescent metal-centered transitions only came into focus in recent years. This gave rise to strongly phosphorescent Cr^III complexes with a d³ electronic configuration featuring luminescent metal-centered excited states which are characterized by the flip of a single spin. These so-called spin-flip emitters possess unique properties and require different design strategies than traditional charge-transfer phosphors. In this review, we give a brief introduction to ligand field theory as a framework to understand this phenomenon and outline prerequisites for efficient spin-flip emission including ligand field strength, symmetry, intersystem crossing and common deactivation pathways using Cr^III complexes as instructive examples. The recent progress and associated challenges of tuning the energies of emissive excited states and of emerging applications of the unique photophysical properties of spin-flip emitters are discussed. Finally, we summarize the current state-of-the-art and challenges of spin-flip emitters beyond Cr^III with d², d³, d⁴ and d⁸ electronic configuration, where we mainly cover pseudooctahedral molecular complexes of V, Mo, W, Mn, Re and Ni, and highlight possible future research opportunities.

Molecular Ruby: Exploring the Excited State Landscape

The discovery of the highly NIR-luminescent Molecular Ruby [Cr(ddpd)2]3+ 13+ (ddpd = N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine) has been a milestone in the development of earth-abundant luminophors and has led to important new impulses...

Strongly Red-Emissive Molecular Ruby [Cr(bpmp)2]3+ Surpasses [Ru(bpy)3]2

Gaining chemical control over the thermodynamics and kinetics of photoexcited states is paramount to an efficient and sustainable utilization of photoactive transition metal complexes in a plethora of technologies. In contrast to energies of charge transfer states described by spatially separated orbitals, the energies of spin-flip states cannot straightforwardly be predicted as Pauli repulsion and the nephelauxetic effect play key roles. Guided by multireference quantum chemical calculations, we report a novel highly luminescent spin-flip emitter with a quantum chemically predicted blue-shifted luminescence. The spin-flip emission band of the chromium complex [Cr(bpmp)₂]³⁺ (bpmp = 2,6-bis(2-pyridylmethyl)pyridine) shifted to higher energy from ca. 780 nm observed for known highly emissive chromium(III) complexes to 709 nm. The photoluminescence quantum yields climb to 20%, and very long excited state lifetimes in the millisecond range are achieved at room temperature in acidic D₂O solution. Partial ligand deuteration increases the quantum yield to 25%. The high excited state energy of [Cr(bpmp)₂]³⁺ and its facile reduction to [Cr(bpmp)₂]²⁺ result in a high excited state redox potential. The ligand's methylene bridge acts as a Brønsted acid quenching the luminescence at high pH. Combined with a pH-insensitive chromium(III) emitter, ratiometric optical pH sensing is achieved with single wavelength excitation. The photophysical and ground state properties (quantum yield, lifetime, redox potential, and acid/base) of this spin-flip complex incorporating an earth-abundant metal surpass those of the classical precious metal [Ru(α-diimine)₃]²⁺ charge transfer complexes, which are commonly employed in optical sensing and photo(redox) catalysis, underlining the bright future of these molecular ruby analogues.

Beyond Chiral Organic (p-Block) Chromophores for Circularly Polarized Luminescence: The Success of d-Block and f-Block Chiral Complexes

Chiral molecules are essential for the development of advanced technological applications in spintronic and photonic. The best systems should produce large circularly polarized luminescence (CPL) as estimated by their dissymmetry factor (g _lum), which can reach the maximum values of -2 ≤ g _lum ≤ 2 when either pure right- or left-handed polarized light is emitted after standard excitation. For matching this requirement, theoretical considerations indicate that optical transitions with large magnetic and weak electric transition dipole moments represent the holy grail of CPL. Because of their detrimental strong and allowed electric dipole transitions, popular chiral emissive organic molecules display generally moderate dissymmetry factors (10^-5 ≤ g _lum ≤ 10^-3). However, recent efforts in this field show that g _lum can be significantly enhanced when the chiral organic activators are part of chiral supramolecular assemblies or of liquid crystalline materials. At the other extreme, chiral Eu^III- and Sm^III-based complexes, which possess intra-shell parity-forbidden electric but allowed magnetic dipole transitions, have yielded the largest dissymmetry factor reported so far with g _lum ~ 1.38. Consequently, 4f-based metal complexes with strong CPL are currently the best candidates for potential technological applications. They however suffer from the need for highly pure samples and from considerable production costs. In this context, chiral earth-abundant and cheap d-block metal complexes benefit from a renewed interest according that their CPL signal can be optimized despite the larger covalency displayed by d-block cations compared with 4f-block analogs. This essay thus aims at providing a minimum overview of the theoretical aspects rationalizing circularly polarized luminescence and their exploitation for the design of chiral emissive metal complexes with strong CPL. Beyond the corroboration that f-f transitions are ideal candidates for generating large dissymmetry factors, a special attention is focused on the recent attempts to use chiral Cr^III-based complexes that reach values of g _lum up to 0.2. This could pave the way for replacing high-cost rare earths with cheap transition metals for CPL applications.

Self-Assembly of Metallo-Supramolecules under Kinetic or Thermodynamic Control: Characterization of Positional Isomers Using Scanning Tunneling Spectroscopy

Coordination-driven self-assembly has been extensively employed to construct a variety of discrete structures as a bottom-up strategy. However, mechanistic understanding regarding whether self-assembly is under kinetic or thermodynamic control is less explored. To date, such mechanistic investigation has been limited to distinct, assembled structures. It still remains a formidable challenge to study the kinetic and thermodynamic behavior of self-assembly systems with multiple assembled isomers due to the lack of characterization methods. Herein, we use a stepwise strategy which combined self-recognition and self-assembly processes to construct giant metallo-supramolecules with 8 positional isomers in solution. With the help of ultrahigh-vacuum, low-temperature scanning tunneling microscopy and scanning tunneling spectroscopy, we were able to unambiguously differentiate 14 isomers on the substrate which correspond to 8 isomers in solution. Through measurement of 162 structures, the experimental probability of each isomer was obtained and compared with the theoretical probability. Such a comparison along with density functional theory (DFT) calculation suggested that although both kinetic and thermodynamic control existed in this self-assembly, the increased experimental probabilities of isomers compared to theoretical probabilities should be attributed to thermodynamic control.

A heteroleptic diradical Cr(iii) complex with extended spin delocalization and large intramolecular magnetic exchange

Successive chemical reductions of the heteroleptic complex [(tpy)Cr^III(tphz)]³⁺ (tpy = terpyridine; tphz = tetrapyridophenazine) give rise to the mono- and di-radical redox isomers, [(tpy)Cr^III(tphz˙^-)]²⁺ and [(tpy˙^-)Cr^III(tphz˙^-)]⁺, respectively. As designed, the optimized overlap of the involved magnetic orbitals leads to extremely strong magnetic interactions between the S = 3/2 metal ion and S = 1/2 radical spins, affording well isolated S_T = 1 and S_T = 1/2 ground states at room temperature.

Key Strategy for the Rational Incorporation of Long-Lived NIR Emissive Cr(III) Chromophores into Polymetallic Architectures

The Cr^IIIN₆ chromophores are particularly appealing for low-energy sensitization via energy transfer processes since they show extremely long excited state lifetimes reaching the millisecond range in the technologically crucial near-infrared domain. However, their properties were barely harnessed in multimetallic structures because of the lack of both monitoring methods and accessible synthetic pathways. We herein report a remedy to monitor and control the formation of Cr^III-containing assemblies in solution via the design of a Cr^IIIN₆ inert "complex-as-ligand" that can be included into polymetallic architectures. As a proof of concept, these CrN₆ building blocks were reacted in solution with Zn^II or Fe^II to give extended trinuclear linear Cr-M-Cr assemblies, the structure of which could be addressed by NMR spectroscopy despite the presence of two slowly relaxing Cr^III paramagnetic centers. In addition to long Cr^III excited state lifetimes and weak sensitivity to oxygen quenching, these polymetallic assemblies display controlled Cr^III to M^II energy transfers, which pave the way for use of the "complex-as-ligand" strategy for introducing photophysically active Cr^III probes into light-converting polymetallic devices.

Luminescent polypyridyl heteroleptic CrIII complexes with high quantum yields and long excited state lifetimes

Implementing high quantum yields and long-lived excited state lifetimes within heteroleptic luminescent CrIII complexes is a keystone for the design of supramolecular energy-converting devices exploiting this cheap metal. In this contribution, we discuss the stepwise and rational optimization of these two limiting factors within a series of heteroleptic CrIII complexes.

Macroporous polystyrene degraded and functionalized chromium MPS-Cr(iii)-alen complex as a sustainable porous catalyst for CO2 fixation under atmospheric pressure and selective oxidation of aromatic alkenes

The benign synthesis of porous polystyrene supported chromium(iii) catalyst has been carried out for the production of cyclic carbonates via CO₂ fixation under atm. pressure and for the selective oxidation of aromatic alkenes under mild conditions.

Luminescence and Light-Driven Energy and Electron Transfer from an Exceptionally Long-Lived Excited State of a Non-Innocent Chromium(III) Complex

Photoactive metal complexes employing Earth-abundant metal ions are a key to sustainable photophysical and photochemical applications. We exploit the effects of an inversion center and ligand non-innocence to tune the luminescence and photochemistry of the excited state of the [CrN6 ] chromophore [Cr(tpe)2 ]3+ with close to octahedral symmetry (tpe=1,1,1-tris(pyrid-2-yl)ethane). [Cr(tpe)2 ]3+ exhibits the longest luminescence lifetime (τ=4500 μs) reported up to date for a molecular polypyridyl chromium(III) complex together with a very high luminescence quantum yield of Φ=8.2 % at room temperature in fluid solution. Furthermore, the tpe ligands in [Cr(tpe)2 ]3+ are redox non-innocent, leading to reversible reductive chemistry. The excited state redox potential and lifetime of [Cr(tpe)2 ]3+ surpass those of the classical photosensitizer [Ru(bpy)3 ]2+ (bpy=2,2'-bipyridine) enabling energy transfer (to oxygen) and photoredox processes (with azulene and tri(n-butyl)amine).

Strong circularly polarized luminescence of an octahedral chromium(iii) complex

The chiral spin–flip luminophore [Cr(ddpd)₂]³⁺ can be resolved into enantiopure material by chiral HPLC. The pure enantiomers display strong CPL activity for the corresponding near-IR phosphorescence.

[Cr(ttpy)2]3+ as a multi-electron reservoir for photoinduced charge accumulation

[Cr(ttpy)2]3+ (ttpy = 4'-(4-methylphenyl)-2,2':6,2''-terpyridine) exhibits rich electrochemical and photophysical properties. Cyclic voltammetry performed in CH3CN shows in the cathodic part the presence of three one-electron reversible systems at -0.47, -0.85 and -1.35 V vs. Ag/AgNO3 10-2 M. These systems are attributed to the reduction of the terpyridine ligands with a partial delocalization of the charge on the tolyl for the last reduction event. The three different reduced species were generated by exhaustive electrolysis and characterized by EPR and UV-visible spectroscopy; DFT calculations were performed to locate the spin density of the electrons added during the reduction. Visible light irradiation of [Cr(ttpy)2]3+ induces the population of a luminescent metal-centered excited state with a lifetime of 270 ns in deoxygenated CH3CN. This excited state can be quenched by an electron transfer process with triphenylphosphine (PPh3) or triethanolamine (TEOA). Using TEOA as a sacrificial electron donor, the doubly reduced species (i.e.[Cr(ttpy)2] +) can be generated under continuous irradiation. In the presence of [Ru(bpy)3]2+ as an additional photosensitizer, the photoreduction of [Cr(ttpy)2]3+ towards [Cr(ttpy)2]+ is accelerated. The trinuclear [{RuII(bpy)2(bpy-O-tpy)}2CrIII]7+ complex ([Ru2Cr]7+) in which a CrIII-bis-terpyridine centre is covalently linked to two RuII-tris-bipyridine moieties by oxo bridges has been synthesised. Its electrochemical, photophysical and photochemical properties were investigated in deoxygenated CH3CN. Cyclic voltammetry indicates only a poor electronic communication between the different subunits, whereas luminescence experiments show a strong quenching of the RuII* excited state by an intramolecular process. Continuous irradiation of [Ru2Cr]7+ under visible conditions in the presence of TEOA leads to [Ru2Cr]4+ where three electrons are stored on the [Cr(ttpy)] subunit.

Electronic Energy Transduction from {Ru(py)4} Chromophores to Cr(III) Luminophores

Despite the large body of work on {Ru(bpy)₂} sensitizer fragments, the same attention has not been devoted to their {Ru(py)₄} analogues. In this context, we explored the donor-acceptor trans-[Ru(L)₄{(μ-NC)Cr(CN)₅}₂]^4-, where L = pyridine, 4-methoxypyridine, 4-dimethylaminopyridine. We report on the synthesis and the crystal structure as well as the electrochemical, spectroscopical, and photophysical properties of these trimetallic complexes, including transient absorption measurements. We observed emission from chromium-centered d-d states upon illuminating into either MLCT or MM'CT absorptions of {Ru(L)₄} or {Ru-Cr}, respectively. The underlying energy transfer is as fast as 600 fs with quantum efficiencies ranging from 10% to 100%. These results document that {Ru(py)₄} sensitizer fragments are as efficient as {Ru(bpy)₂} in short-range energy transfer scenarios.

Versatile heteroleptic bis-terdentate Cr(iii) chromophores displaying room temperature millisecond excited state lifetimes

Cr–Br bonds can be specifically labilized for producing phosphorescent and tuneable heteroleptic bis-terdentate Cr(iii) long-lived sensitizers.