Stimuli-responsive linkers and their application in molecular imaging

Molecular imaging is a non-invasive imaging method that is widely used for visualization and detection of biological events at cellular or molecular levels. Stimuli-responsive linkers that can be selectively cleaved by specific biomarkers at desired sites to release or activate imaging agents are appealing tools to improve the specificity, sensitivity, and efficacy of molecular imaging. This review summarizes the recent advances of stimuli-responsive linkers and their application in molecular imaging, highlighting the potential of these linkers in the design of activatable molecular imaging probes. It is hoped that this review could inspire more research interests in the development of responsive linkers and associated imaging applications.

A Prompt Study on Recent Advances in the Development Of Colorimetric and Fluorescent Chemosensors for "Nanomolar Detection" of Biologically Important Analytes

Fluorescent and colorimetric chemosensors for selective detection of various biologically important analytes have been widely applied in different areas such as biology, physiology, pharmacology, and environmental sciences. The research area based on fluorescent chemosensors has been in existence for about 150 years with the development of large number of fluorescent chemosensors for selective detection of cations as metal ions, anions, reactive species, neutral molecules and different gases etc. Despite the progress made in this field, several problems and challenges still exist. The most important part of sensing is limit of detection (LOD) which is the lowest concentration that can be measured (detected) with statistical significance by means of a given analytical procedure. Although there are so many reports available for detection of millimolar to micromolar range but the development of chemosensors for the detection of analytes in nanomolar range is still a challenging task. Therefore, in our current review we have focused the history and a general overview of the development in the research of fluorescent sensors for selective detection of various analytes at nanomolar level only. The basic principles involved in the design of chemosensors for specific analytes, binding mode, photophysical properties and various directions are also covered here. Summary of physiochemical properties, mechanistic view and type of different chemosensors has been demonstrated concisely in the tabular forms.

Selective and Sensitive Detection of Hg2+ and Ag+ by a Fluorescent and Colorimetric Probe with Large Stokes Shift

Development of fluorescent sensors with large Stokes shift for selective detection of heavy metals is of great importance. A novel fluorescent probe with extremely large Stokes shift (212 nm) was synthesized for selective and simultaneous detection of Hg2+ and Ag+ ions. The deep yellow probe turned colorless or pale yellow after addition of Hg2+ or Ag+. The new probe could be utilized for absorption spectral detection of Hg2+ and Ag+ both in ethanol and aqueous solution. Addition of Hg2+ and Ag+ ions caused significant decrease in the fluorescence intensity of the new probe and the selective recognition of Hg2+ and Ag+ was not interfered by common competitive metal ions including Li+, Na+, K+, Cu2+, Fe2+, Zn2+, Co2+, Ni2+, Mn2+, Sr2+, Ca2+, Mg2+, Al3+, Cr3+ and Fe3+. The detection limit for Hg2+ and Ag+ was calculated to be 4.68 μM and 4.29 μM, respectively. Application of the new probe for quantitative determination of Hg2+ and Ag+ concentrations in real water samples was accomplished.

A Simple Schiff Base Probe for Quintuplicate-Metal Analytes with Four Emission-Wavelength Responses

A versatile mono-Schiff compound consisting of o-aminobenzene-hydroxyjulolidine (ABJ-MS) has been easily synthesized using a one-step reaction. ABJ-MS displays four diverse fluorescence responses to the addition of Zn2+/Al3+/Fe3+/Ag+, with the maximum fluorescence emission at 530 nm undergoing a hypsochromic shift to 502/490/440/430 nm, synchronously with the discriminating fluorescence enhancement being 10.6/22.8/2.6/7.1-fold, respectively. However, the addition of Cu2+ into ABJ-MS leads to an opposite behavior, namely, fluorescence quenching. Meanwhile, ABJ-MS also displays distinct absorption changes after adding these five metal ions due to different binding affinities between them and ABJ-MS, which gives ABJ-MS quite a versatile detecting nature for Cu2+/Zn2+/Al3+/Fe3+/Ag+. Moreover, ABJ-MS can mimic a series of versatile AND/OR/INH-consisting logic circuits on the basis of the Cu2+/Zn2+/Al3+/Fe3+/Ag+-mediated diverse optical responses. These will endow the smart ABJ-MS molecule and potential applications in the multi-analysis chemosensory and molecular logic material fields.

Development of a new near-infrared, spectrophotometric, and colorimetric probe based on phthalocyanine containing mercaptoquinoline unit for discriminative and highly sensitive detection of Ag+, Cu2+, and Hg2+ ions

A new near-infrared, spectrophotometric, and colorimetric probe based on a phthalocyanine-containing mercaptoquinoline unit (MQZnPc) has been constructed and utilized for discriminative and highly selective/sensitive detection of Ag⁺, Cu²⁺, and Hg²⁺ ions by using proper masking agents like EDTA, KI, and NaCl. The probe only responds to Ag⁺, Cu²⁺, and Hg²⁺ among the tested ions without any interference. The probe performs quite well (the limit of detection: 160 ppb, 148 ppb, and 276 ppb of Ag⁺, Cu²⁺, and Hg²⁺ions for UV-Vis, and 15 ppb, 37 ppb, and 467 ppb of Ag⁺, Cu²⁺, and Hg²⁺ ions for fluorescence, respectively), and has a fast response time (150 sec, 90 sec, and 90 sec of Ag⁺, Cu²⁺, and Hg²⁺ions for UV-Vis, and 300 sec, 240 sec, and 90 sec Ag⁺, Cu²⁺, and Hg²⁺ions for fluorescence, respectively). The probe also displays a colorimetric feature for UV-Vis and smartphone applications. Based on a single probe, Ag⁺, Cu²⁺, and Hg²⁺ ions which are the main toxic water contaminants could be recognized very quickly and colorimetrically with high recovery values in tap water samples. This study stands out with its unique properties compared to the related studies in the literature.

Self-Assembled Cage for In Situ Detecting Silver Cation in Water

Here, a capsule-shaped cage comprising three monocationic arms was efficiently self-assembled by condensing a triscationic trisaldehyde and a trisamino linkage in water. Multivalence endows the cage with thermodynamic stability in water. Despite its triscationic nature, the cage is able to use its trisimino residue to coordinate a silver cation. As a comparison, other cations lead to cage decomposition or no coordination. The cage and Ag⁺-coordinated complex were both characterized and confirmed by NMR spectroscopy, mass spectrometry, and theoretical calculations. The metal-ligand complex exhibits a pale-yellow color that can be detectable by the naked eye. The Ag⁺-coordinated complex undergoes decoordination upon the addition of NaCl, during which the cage containing imine bonds remains intact. Such stability implies that the cage might be potentially employed in silver detection and mining.

A Review on Organic Fluorimetric and Colorimetric Chemosensors for the Detection of Ag(I) Ions

Organic compounds display several electronic and structural features which enable their application in various fields, ranging from biological to non-biological. These compounds contain heteroatoms like sulfur, nitrogen and oxygen, which provide coordination sites to act as ligands in the field of coordination chemistry and are used as chemosensors to detect various metal ions. This review article covers different organic compounds including thiourea, Schiff base, pyridine, thiophene, coumarin, triazolyl pyrenes, imidazole, fluorescein, thiazole, tricarbocyanine, rhodanine, porphyrin, hydrazone, benzidine and other functional groups based chemosensors, that contain heteroatoms like sulfur, nitrogen and, oxygen for fluorimetric and colorimetric detection of Ag+ in different environmental, agricultural, and biological samples. Further, the sensing mechanism and performances of these chemosensors have been discussed, which could help the readers for the future design of highly efficient, selective, and sensitive chemosensors for the detection and determination of Ag+ ions.

Microwave-Assisted Synthesis of Red Emitting Copper Nanoclusters Using Trypsin as a Ligand for Sensing of Pb2+ And Hg2+ Ions in Water and Tobacco Samples

In this work, a microwave assisted method was developed for synthesis of red fluorescent copper nanoclusters (NCs) using trypsin as a template (trypsin-Cu). The as-synthesized trypsin-Cu NCs are stable and water soluble, exhibiting fluorescence emission at 657 nm when excited at 490 nm. The as-prepared red-emitting trypsin-Cu NCs were characterized by using several analytical techniques such as ultraviolet-visible (UV-Vis) and fluorescence, fluorescence lifetime, Fourier transform infrared, and X-ray photoelectron spectroscopic techniques. Red-emitting trypsin-Cu NCs acted as a nanosensor for sensing both Pb2+ and Hg2+ ions through fluorescence quenching. Using this approach, good linearities are observed in the range of 0.1-25 and of 0.001-1 μM with the lower limit of detection of 14.63 and 56.81 nM for Pb2+ and Hg2+ ions, respectively. Trypsin-Cu NCs-based fluorescence assay was successfully applied to detect both Hg2+ and Pb2+ ions in water and tobacco samples.

A Naphthalimide-Based Fluorescent Probe for the Detection and Imaging of Mercury Ions in Living Cells

The selective and efficient monitoring of mercury (Hg2+ ) contamination found in the environment and ecosystem has been carried out. Thus, a new 1,8-naphthalimide-based fluorescent probe NADP for the detection of Hg2+ based on a fluorescence enhancement strategy has been designed and synthesized. The NADP probe can detect Hg2+ with high selectivity and sensitivity and a low detection limit of 13 nm. The detection mechanism was based on a Hg2+ -triggered deprotection reaction, resulting in a dramatic change in fluorescence from colorless to green at physiological pH. Most importantly, biological investigation has shown that the NADP probe can be successfully applied to the monitoring of Hg2+ in living cells and zebrafish with low cytotoxicity.

Rapid and visual detection of Cd2+ based on aza-BODIPY near infrared dye and its application in real and biological samples for environmental contamination screening

Cadmium highly toxic and hazardous, and it can adversely affect human health leading to serious disorders. Herein, a water-soluble near-infrared sensor based on aza-BODIPY (1) was developed for dual determination of Cd²⁺ in environmental and biological media. This sensor exhibited color change from colorless to green along with a fluorescence enhancement in the near-infrared (NIR) region via photoinduced electron transfer (PET) after complexation with Cd²⁺. Sensor 1 can be employed in aqueous media at physiological pH for quantitative monitoring. It shows rapid response with high sensitivity (detection limit of 2.8 ppb; linear correlation over [Cd²⁺] 1.33 - 6.67 µM) and selectivity over potentially interfering ions. NIR sensor 1 can be used to determine [Cd²⁺] in living cells and environmental samples.

Kaempferol as an AIE-active natural product probe for selective Al3+ detection in Arabidopsis thaliana

In this work, a natural product probe, kaempferol, which exhibited aggregation-induced emission (AIE) characteristic in water/tetrahydrofuran (THF) binary solvent was explored. The probe showed high resistance to photobleaching capacity and excellent selectivity towards Al³⁺ in the aggregation state. Upon the addition of Al³⁺, the probe displayed more than 12-fold (I₄₈₆/I₄₂₁) fluorescence intensity enhancement, accompanied by a color change, suggesting that the aggregated kaempferol can be used as a ratiometric probe for Al³⁺ detecting. Notably, promising selectivity to Al³⁺ within the pH range of 6-8 made the probe suitable for physiological conditions. Further Arabidopsis thaliana root imaging experiment demonstrated that the probe could image Al³⁺ in the plant.

Pb2+ sensing by coumarin sulphonamide hybrids in aqueous medium

Metals play an important role in various metabolic activities in the human body, but above desired concentrations, a role reversal occurs that causes deadly outcomes viz., cancer. Metals cannot be cracked down and are non-biodegradable. It is the bioaccumulation of toxic metals inside the biomatrices, that further intensifies the research on different means of metal detoxification from different matrices. Among heavy toxic metals lead is a brutal carcinogen that requires pitiless sensors for its capturing. The use of heterocycles for metal sensing in supramolecular chemistry is preferred due to the strong chelation they offer to toxic metals. The C1-C3 probes were synthesized and studied for their Pb²⁺ binding ability. All the probes were prepared by treating bromoacetyl coumarin with camphor sulphonamide, 5-dimethylamino-1-naphthalene sulphonamide, and methyl-2-amino-sulphonyl benzoate at room temperature. The probes show selective binding with Pb²⁺ ions in aqueous acetonitrile among different tested metal ions viz., Cu²⁺ , Zn²⁺ , Ni²⁺ , Mn^2+, and Pb²⁺ ions as shown in ultraviolet (UV)-visible, nuclear magnetic resonance (NMR), and high-performance liquid chromatography (HPLC) studies. These sulphur-containing probes bind very well with Pb²⁺ ions by offering selectivity in binding positions that capture lead ions at their minimum possible concentration.

An imine linked fluorescent covalent organic cage: the sensing of chloroform vapour and metal ions, and the detection of nitroaromatics

Fluorescent covalent organic cage molecule (F-COC) showed enhanced emission intensity in chloroform solution and polymer matrix film form in presence of chloroform vapours.

Naphthalimide based fluorescent organic nanoparticles in selective sensing of Fe3+ and as a diagnostic probe for Fe2+/Fe3+ transition

Fluorescent organic nanoparticles (FONPs) have attracted considerable attention as a practical and effective platform for sensing and imaging applications. The present article delineates the fabrication of FONPs derived from the naphthalimide based histidine appended amphiphile, NID. The self-assembly of NID in 99 vol% water in DMSO led to the formation of FONPs through J-type aggregation. Aggregation-induced emission (AIE) was observed due to the pre-associated excimer of NID with bluish green emission at 470 nm along with intramolecular charge transfer (ICT). The emission of NID FONPs was utilized for selective sensing of Fe³⁺ and bioimaging of Fe³⁺ inside mammalian cells. The fluorescence intensity of the FONPs was quenched with the gradual addition of Fe³⁺ due to the formation of a 1 : 1 stoichiometric complex with the histidine residue of NID. The morphology of the FONPs transformed from spherical to spindle upon the complex formation of NID with Fe³⁺. The limit of detection (LOD) of this AIE based turn-off chemosensor for Fe³⁺ was found to be 12.5 ± 1.2 μM having high selectivity over other metal ions. On the basis of the very low cytotoxicity and selective sensing of Fe³⁺, NID FONPs were successfully employed for bioimaging of Fe³⁺ ions through fluorescence quenching within mammalian cells (NIH3T3, B16F10). Considering the varying oxidative stress inside different cells, NID FONPs were used for detecting Fe²⁺ to Fe³⁺ redox state transition selectively inside cancer cells (B16F10) in comparison to non-cancerous cells (NIH3T3). Selective sensing of cancer cells was substantiated by co-culture experiment and flow cytometry. Hence, NID FONPs can be a selective diagnostic probe for cancer cells owing to their higher H₂O₂ content.

Selective determination of Ag+ in the presence of Cd2+, Hg2+ and Cu2+ based on their different interactions with gold nanoclusters

In this work, a fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters (AuNCs). That is, bovine serum albumin (BSA) templated AuNCs with double emission peaks were synthesized using BSA as a protective agent. AuNCs with uniform distribution and average size between 2.0 and 2.2 nm were synthesized using a green and simple method, and showed bright orange-red fluorescence under ultraviolet light. AuNCs have two emission peaks at 450 nm and 630 nm with an excitation wavelength of 365 nm. Under alkaline conditions, Cd²⁺ can combine with the surface sulfhydryl groups of BSA–AuNCs to form Cd–S bonds, which cause AuNCs to aggregate, resulting in an increase in fluorescence intensity at 630 nm. Conversely, due to the d¹⁰–d¹⁰ metal affinity interaction, the addition of Hg²⁺ can reduce the fluorescence peak at 630 nm. Ag⁺ was reduced to Ag⁰ by gold nuclei in AuNCs, forming a stable hybrid Au@ AgNCs species with blue-shifted and enhanced fluorescence. Finally, the paramagnetic behavior of Cu²⁺ combined with BSA causes the excited electrons of the gold cluster to lose their energy via ISC, eventually leading to simultaneous quenching of the two emission peaks. The results show that the limit of detection (LOD) of Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters. The limit of detection for Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A novel phenolphthalein-based fluorescent sensor for Al3+ sensing in drinking water and herbal tea samples

In this study, 3,3-bis(4-hydroxy-3-((E)-((4-hydroxyphenyl)imino)methyl) phenyl)isobenzofuran-1(3H)-one (HMBP) was designed as a ''turn-on″ fluorogenic chemosensor to detect Al³⁺. Studies were performed in C₂H₅OH-HEPES (v/v, 9/1, pH 7.0) media at λ_em = 475 nm. The LOD value was found to be 0.113 µM. The stoichiometric ratio of HMBP-Al³⁺ was determined as 1:2 by Job's plot and ESI-MS as well as ¹H NMR titration. The binding constant of chemosensor HMBP with Al³⁺ from the Benesi-Hildebrand equation was determined to be 1.21 × 10⁸ M^-1. The quantum (Φ) yields were obtained as 0.040 and 0.775 for the chemosensor HMBP and HMBP-Al³⁺, respectively. The response of the chemosensor HMBP towards Al³⁺ was attributed to the strategies of blocking the photo-induced electron transfer (PET) and CN isomerisation mechanisms. Finally, the sensing of the chemosensor HMBP for the determination of Al³⁺ in real food samples, drinking waters and herbal teas, were employed.

Peptoid-based siderophore mimics as dinuclear Fe3+ chelators

A practical synthesis of preorganized tripodal enterobactin/corynebactin-type ligands (consisting of a C₃-symmetric macrocyclic peptoid core, three catecholamide coordinating units, and C₂, C₄, and C₆ spacers) is reported. The formation of complexes with Fe³⁺ was investigated by spectrophotometric (UV-Vis) and spectrometric (ESI, negative ionization mode) methods and corroborated by theoretical (DFT) calculations. Preliminary studies revealed the intricate interplay between the conformational chirality of cyclic trimeric peptoids and metal coordination geometry of mononuclear species similar to that of natural catechol-based siderophores. Experimental results demonstrated the unexpected formation of unique dinuclear Fe³⁺ complexes.

A natural cyanobacterial protein C-phycoerythrin as an Hg2+ selective fluorescent probe in aqueous systems

C-phycoerythrin (CPE) as a natural protein-based fluorescence ‘turn off’ probe for Hg²⁺ in aqueous systems.

A fluorescence probe based on 6-phenylimidazo[2,1-b]thiazole and salicylaldehyde for the relay discerning of In3+ and Cr3+

A new fluorescence probe, (E)-N′-(2-hydroxybenzylidene)-6-phenylimidazo[2,1-b]thiazole-3-carbohydrazide (LB1), based on 6-phenylimidazo[2,1-b]thiazole and salicylaldehyde was designed and synthesized.

Sensing of zinc ions and sulfide using a highly practical and water-soluble fluorescent sensor: applications in test kits and zebrafish

A practical fluorescent sensor was synthesized for recognition of Zn²⁺ and S²⁻ and applied in various applications such as in live zebrafish.

A Highly Selective Turn-on and Reversible Fluorescent Chemosensor for Al3+ Detection Based on Novel Salicylidene Schiff Base-Terminated PEG in Pure Aqueous Solution

The development of highly selective and sensitive chemosensors for Al³⁺ detection in pure aqueous solution is still a significant challenge. In this work, a novel water-soluble polymer PEGBAB based on salicylidene Schiff base has been designed and synthesized as a turn-on fluorescent chemosensor for the detection of Al³⁺ in 100% aqueous solution. PEGBAB exhibited high sensitivity and selectivity to Al³⁺ over other competitive metal ions with the detection limit as low as 4.05 × 10⁻⁹ M. PEGBAB displayed high selectivity to Al³⁺ in the pH range of 5–10. The fluorescence response of PEGBAB to Al³⁺ was reversible in the presence of ethylenediaminetetraacetic acid (EDTA). Based on the fluorescence response, an INHIBIT logic gate was constructed with Al³⁺ and EDTA as two inputs. Moreover, test strips based on PEGBAB were fabricated facilely for convenient on-site detection of Al³⁺.

A novel dithiourea-appended naphthalimide "on-off" fluorescent probe for detecting Hg2+ and Ag+ and its application in cell imaging

An effective dithiourea-appended 1,8-naphthalimide fluorescent probe was designed and synthesized. This probe could recognize Hg²⁺ and Ag⁺ sensitively and selectively in neutral and alkaline conditions. Moreover, the probe detected Hg²⁺ alone at pH between 2 and 6. The sensing ability of the probe was explored by UV-vis, fluorescence, FTIR and ¹H NMR spectroscopy. The probe was quenched by Hg²⁺ and Ag⁺ with 1:1 binding ratios in MeCN/H₂O (4/1, v/v) mixed solution with binding constants of 3.76 × 10⁴ L mol^-1 and 2.47 × 10⁴ L mol^-1, respectively. The linear concentration ranges for Hg²⁺ and Ag⁺ were 0-17 μmol L^-1 and 0-24 μmol L^-1 with detection limits of 0.83 μmol L^-1 and 1.20 μmol L^-1, respectively, which allowed for the quantitative determination of Hg²⁺ and Ag⁺. The new probe, 3a, was successfully applied to the fluorescence imaging of Hg²⁺ and Ag⁺ in HepG2 cells, demonstrating its potential application in biological science. Moreover, 3a was used to measure Hg²⁺ and Ag⁺ in tap water, drinking water and ultrapure water samples. The recoveries of Hg²⁺ and Ag⁺ in water samples were 96-99% and 98-103%, respectively. Therefore, the proposed method showed promising perspectives for its application, aimed at detecting Hg²⁺ and Ag⁺ in fluorescence imaging and real water samples.

Cost-effective approach to detect Cu(ii) and Hg(ii) by integrating a smartphone with the colorimetric response from a NBD-benzimidazole based dyad

A new optical chemosensor N1 was designed and synthesized by condensing 4-chloro-7-nitrobenzofurazan with 2-aminophenylbenzimidazole. In CH₃OH : H₂O (1 : 1, v/v) medium, sensor N1 exhibited high selectivity and sensitivity towards Cu²⁺ and Hg²⁺ ions by showing a distinct colour change from pale yellow to pink due to the internal charge transfer occurring between the sensor N1 and the Cu²⁺/Hg²⁺ ions upon complexation in 1 : 1 stoichiometry.

An easy-to-synthesize multi-photoresponse smart sensor for rapidly detecting Zn2+ and quantifying Fe3+ based on the enol/keto binding mode

A readily available salicylaldazine-modified fluorene Schiff base (EASA-F) exhibits fast fluorescent OFF–ON response to Zn²⁺ and OFF–ON–OFF behavior to Fe³⁺ synchronously accompanied the diverse absorption-ratiometric and colorimetric changes.

A macrocyclic tetranuclear ZnII complex as a receptor for selective dual fluorescence sensing of F− and AcO−: effect of a macrocyclic ligand

Fluorimetric detection of F⁻/AcO⁻ with an additional ‘INHIBIT’ logic gate response for F⁻/H⁺ and AcO⁻/H⁺ in an aqueous-methanol medium by a 48-membered macrocyclic Zn^II-complex DAS has been explored by combined experimental and theoretical study.

Facile and visual detection of acetylcholinesterase inhibitors by carbon quantum dots

Sensitive and rapid detection of organophosphate toxicants is highly relevant and important in environmental protection and food safety.

Luminescent cadmium(ii) coordination polymers of 1,2,4,5-tetrakis(4-pyridylvinyl)benzene used as efficient multi-responsive sensors for toxic metal ions in water

One luminescent cadmium(ii) coordination polymer of 1,2,4,5-tetrakis(4-pyridylvinyl)benzene works as an efficient multi-responsive sensor for Hg²⁺, CrO₄²⁻ and Cr₂O₇²⁻ in water.