NiMn2O4 spinel binary nanostructure decorated on three-dimensional reduced graphene oxide hydrogel for bifunctional materials in non-enzymatic glucose sensor

Synthesis and Characterisation of Core-Shell Microparticles Formed by Ni-Mn-Co Oxides

In this work, core and core-shell microparticles formed by Ni-Mn-Co oxides with controlled composition were fabricated by an oxalate-assisted co-precipitation route, and their properties were analysed by diverse microscopy and spectroscopy techniques. The microparticles exhibit dimensions within the 2-6 μm range and mainly consist of NiO and NiMn2O4, the latter being promoted as the temperature of the treatment increases, especially in the shell region of the microparticles. Aspects such as the shell dimensions, the vibrational modes of the spinel compounds primarily observed in the shell region, the oxidation states of the cations at the surface of the microparticles, and the achievement of a Ni-rich 811 core and a Mn-rich 631 shell were thoroughly evaluated and discussed in this work.

Synthesis and adsorption performance of three-dimensional gels assembled by carbon nanomaterials for heavy metal removal from water: A review

This review focuses on the removal of heavy metals from water by three-dimensional gels with carbon nanomaterials as the main building units. It highlights the fundamental knowledge, most recent advances, and future prospects of carbon nanomaterial-assembled gels (CNAGs) as effective adsorbents for heavy metals in water. Various synthesis methods of CNAGs including template-assisted, self-assembly and other methods are systematically summarized and evaluated. Adsorption performances of CNAGs to typical cationic and anionic heavy metals, especially lead, cadmium, mercury, chromium, and arsenic, are thoroughly examined and discussed in detail. These analyses bring out that composite CNAGs constructed from carbon nanomaterials with polymers or other engineered nanoparticles are the most promising adsorbents for heavy metal removal from water. Current challenges and future research directions that are critical to the applications of CNAGs in the removal of heavy metals from contaminated water are outlined at the end of the review.

3D Flower-like NiCo Layered Double Hydroxides: An Efficient Electrocatalyst for Non-Enzymatic Electrochemical Biosensing of Hydrogen Peroxide in Live Cells and Glucose in Biofluids

Herein, a hierarchical structure of flower-like NiCo layered double hydroxides (NiCo LDH) microspheres composed of three-dimensional (3D) ultrathin nanosheets was successfully synthesized via a facile hydrothermal approach. The formation of NiCo LDH was confirmed by various physicochemical studies, and the NiCo LDH-modified glassy carbon electrode was used as an efficient dual-functional electrocatalyst for non-enzymatic glucose and hydrogen peroxide (H₂O₂) biosensor. The host matrix of hydrotalcite NiCo LDH exhibits the enhanced electrocatalytic sensing performances with a quick response time (<3 s), wide linear range (50 nM-18.95 mM and 20 nM-11.5 mM) and lowest detection limits (S/N = 3) (10.6 and 4.4 nM) toward glucose and H₂O₂, and also it exhibits good stability, selectivity, and reproducibility. In addition, this biosensor was successfully utilized to the real-time detection of endogenous H₂O₂ produced from live cells and glucose in various biological fluids, and demonstrates that the as synthesized NiCo LDH may provide a successful pathway for physiological and clinical pathological diagnosis.

A novel selective ternary platform fabricated with MgAl-layered double hydroxide/NiMn2O4 functionalized polyaniline nanocomposite deposited on a glassy carbon electrode for electrochemical sensing of levodopa

In this study, a novel selective electrochemical sensor was fabricated for determination of levodopa (LD) using a glassy carbon electrode modified with MgAl-layered double hydroxide/NiMn₂O₄ functionalized polyaniline nanocomposite (LDH/NMO/PANI) and its successful formation was confirmed by various techniques. Owing to the high surface area and outstanding conductivity features provided by the combination of MgAl-LDH, NiMn₂O₄ and PANI nanoparticles, this ternary nanocomposite exhibited excellent electrochemical activity towards the detection of LD compared with the electrode modified by the pristine MgAl-LDH and MgAl-LDH/NiMn₂O₄ binary nanocomposite. In addition, enormous quantities of amine and imine functional groups on the surface of PANI lead to a strong affinity for attachment to organic molecules such as LD. The ternary nanocomposite modified electrode exhibited excellent analytical parameters such as wide linear response from 0.1 to 100 μM with very low detection limit of 0.005 μM, good reproducibility and long-term stability which are superior among the LD electrochemical sensors. Besides, the constructive sensor possessed acceptable selectivity for recognition of LD in the presence of a variety of potentially interfering species and can also effectively avoid the interference of dopamine (DA) and ascorbic acid (AA). Consequently, the LDH/NMO/PANI/GC electrode was effectively applied to detect LD in human plasma and urine samples with good recoveries, ranging from 98.0-100.1% and it shows potential usage in clinical researches.

Role of Transition Metals in Layered Double Hydroxides for Differentiating the Oxygen Evolution and Nonenzymatic Glucose Sensing

Layered double hydroxides (LDH) belong to the class of two-dimensional materials having a wide variety of applications ranging from energy storage to catalysis. Often, these materials when used for nonenzymatic electrochemical glucose sensing tend to be interfering with oxygen evolution reaction (OER), resulting in overestimation of the glucose. Herein, to address this, NiFe-based LDH were selected because of their ability to vary the metal ratios. The synthesized LDH have been characterized using various spectroscopic and microscopic techniques. Among the LDH synthesized, Ni₄Fe-LDH have been able to differentiate the glucose oxidation potential and the onset potential of OER with minimum interference. The Ni₄Fe-LDH sensor shows a sensitivity of 20.43 μA mM^-1 cm^-2 in the linear range of 0-4 mM concentrations. To further enhance the sensitivity, composites of reduced graphene oxide (rGO) have been synthesized in situ, and the Ni₄Fe/rGO₅ composites have shown an increased sensitivity of 176.8 μA mM^-1 cm^-2 attributed to the charge-transfer interactions. To understand the experimental observations, detailed computational studies have been carried out to study the effect of the electronic structure on the metal ratios of the LDH and its role in differentiating glucose sensing and the oxygen evolution reaction. Along with this, theoretical calculations are also carried out on LDH-graphene composites to study the charge-transfer interactions.

Facile Synthesis of ZnMn2O4@rGO Microspheres for Ultrasensitive Electrochemical Detection of Hydrogen Peroxide from Human Breast Cancer Cells

Mixed transition-metal oxides have witnessed increasing attention in catalysts and electrocatalysts. Herein, reduced graphene oxide-wrapped ZnMn₂O₄ microspheres (ZnMn₂O₄@rGO) were facilely synthesized through the solvothermal technique. The microstructure and morphology of ZnMn₂O₄@rGO microspheres were analyzed under Raman, X-ray photoelectron, X-ray diffraction, and energy-dispersive spectroscopies and scanning electron microscopy. The synthesized ZnMn₂O₄@rGO was employed as an excellent electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). The ZnMn₂O₄@rGO-modified glassy carbon electrode (ZnMn₂O₄@rGO/GCE) exhibited a linear detection to H₂O₂ in a wide concentration range of 0.03-6000 μM with a detection limit of 0.012 μM. The biosensor was evaluated to determine H₂O₂ secreted by human breast cancer cells (MCF-7), indicating its promising applications in physiology and diagnosis.

Fabrication of porous NiMn2O4 nanosheet arrays on nickel foam as an advanced sensor material for non-enzymatic glucose detection

In this work, porous NiMn₂O₄ nanosheet arrays on nickel foam (NiMn₂O₄ NSs@NF) was successfully fabricated by a simple hydrothermal step followed by a heat treatment. Porous NiMn₂O₄ NSs@NF is directly used as a sensor electrode for electrochemical detecting glucose. The NiMn₂O₄ nanosheet arrays are uniformly grown and packed on nickel foam to forming sensor electrode. The porous NiMn₂O₄ NSs@NF electrode not only provides the abundant accessible active sites and the effective ion-transport pathways, but also offers the efficient electron transport pathways for the electrochemical catalytic reaction by the high conductive nickel foam. This synergy effect endows porous NiMn₂O₄ NSs@NF with excellent electrochemical behaviors for glucose detection. The electrochemical measurements are used to investigate the performances of glucose detection. Porous NiMn₂O₄ NSs@NF for detecting glucose exhibits the high sensitivity of 12.2 mA mM⁻¹ cm⁻² at the window concentrations of 0.99–67.30 μM (correlation coefficient = 0.9982) and 12.3 mA mM⁻¹ cm⁻² at the window concentrations of 0.115–0.661 mM (correlation coefficient = 0.9908). In addition, porous NiMn₂O₄ NSs@NF also exhibits a fast response of 2 s and a low LOD of 0.24 µM. The combination of porous NiMn₂O₄ nanosheet arrays and nickel foam is a meaningful strategy to fabricate high performance non-enzymatic glucose sensor. These excellent properties reveal its potential application in the clinical detection of glucose.

Recent Advances of Porous Graphene: Synthesis, Functionalization, and Electrochemical Applications

Graphene is a 2D sheet of sp² bonded carbon atoms and tends to aggregate together, due to the strong π-π stacking and van der Waals attraction between different layers. Its unique properties such as a high specific surface area and a fast mass transport rate are severely blocked. To address these issues, various kinds of 2D holey graphene and 3D porous graphene are either self-assembled from graphene layers or fabricated using graphene related materials such as graphene oxide and reduced graphene oxide. Porous graphene not only possesses unique pore structures, but also introduces abundant exposed edges and accelerates mass transfer. The properties and applications of these porous graphenes and their composites/hybrids have been extensively studied in recent years. Herein, recent progress and achievements in synthesis and functionalization of various 2D holey graphene and 3D porous graphene are reviewed. Of special interest, electrochemical applications of porous graphene and its hybrids in the fields of electrochemical sensing, electrocatalysis, and electrochemical energy storage, are highlighted. As the closing remarks, the challenges and opportunities for the future research of porous graphene and its composites are discussed and outlined.

Rational Construction of 3D-Networked Carbon Nanowalls/Diamond Supporting CuO Architecture for High-Performance Electrochemical Biosensors

Tremendous demands for highly sensitive and selective nonenzymatic electrochemical biosensors have motivated intensive research on advanced electrode materials with high electrocatalytic activity. Herein, the 3D-networked CuO@carbon nanowalls/diamond (C/D) architecture is rationally designed, and it demonstrates wide linear range (0.5 × 10^-6 -4 × 10^-3 m), high sensitivity (1650 µA cm^-2 mm^-1 ), and low detection limit (0.5 × 10^-6 m), together with high selectivity, great long-term stability, and good reproducibility in glucose determination. The outstanding performance of the CuO@C/D electrode can be ascribed to the synergistic effect coming from high-electrocatalytic-activity CuO nanoparticles and 3D-networked conductive C/D film. The C/D film is composed of carbon nanowalls and diamond nanoplatelets; and owing to the large surface area, accessible open surfaces, and high electrical conduction, it works as an excellent transducer, greatly accelerating the mass- and charge-transport kinetics of electrocatalytic reaction on the CuO biorecognition element. Besides, the vertical aligned diamond nanoplatelet scaffolds could improve structural and mechanical stability of the designed electrode in long-term performance. The excellent CuO@C/D electrode promises potential application in practical glucose detection, and the strategy proposed here can also be extended to construct other biorecognition elements on the 3D-networked conductive C/D transducer for various high-performance nonenzymatic electrochemical biosensors.

A non-enzymatic amperometric glucose sensor based on the use of graphene frameworks-promoted ultrafine platinum nanoparticles

Ultrafine platinum nanoparticles are grown on a 3D graphene framework (GF-Pt) via a hydrothermal method. The material, when placed on a glassy carbon electrode (GCE), displays enhanced electrocatalytic activity towards glucose oxidation. This is assumed to be the result of the numerous easily accessible active sites, an enlarged electrochemically active area, and the presence of multiple electron/ion transport channels. The modified GCE can be operated at a low potential (- 0.15 V vs. Ag/AgCl) has linear responses in the 0.1 μM - 0.01 mM and 0.01 mM - 20 mM glucose concentration range, and a 30 nM detection limit. It was applied to the rapid determination of glucose in human serum samples. Graphical abstract Schematic presentation of a glassy carbon electrode modified with ultrafine Pt nanoparticles grown on a graphene framework (GFs-Pt). GFs-Pt presents enhanced electrocatalytic activity towards glucose oxidation. GFs-Pt is used in a sensitive non-enzymatic amperometric glucose sensor.

Single-Step Formation of Ni Nanoparticle-Modified Graphene-Diamond Hybrid Electrodes for Electrochemical Glucose Detection

The development of accurate, reliable devices for glucose detection has drawn much attention from the scientific community over the past few years. Here, we report a single-step method to fabricate Ni nanoparticle-modified graphene–diamond hybrid electrodes via a catalytic thermal treatment, by which the graphene layers are directly grown on the diamond surface using Ni thin film as a catalyst, meanwhile, Ni nanoparticles are formed in situ on the graphene surface due to dewetting behavior. The good interface between the Ni nanoparticles and the graphene guarantees efficient charge transfer during electrochemical detection. The fabricated electrodes exhibit good glucose sensing performance with a low detection limit of 2 μM and a linear detection range between 2 μM–1 mM. In addition, this sensor shows great selectivity, suggesting potential applications for sensitive and accurate monitoring of glucose in human blood.

Electrochemical Energy Storage Properties of Ni-Mn-Oxide Electrodes for Advance Asymmetric Supercapacitor Application

In this work, we report a facile one-spot synthesis process and the influence of compositional variation on the electrochemical performance of Ni-Mn-oxides (Ni:Mn = 1:1, 1:2, 1:3, and 1:4) for high-performance advanced energy storage applications. The crystalline structure and the morphology of these synthesized nanocomposites have been demonstrated using X-ray diffraction, field emission scanning electron microscopy, and transmission electron Microscopy. Among these materials, Ni-Mn-oxide with Ni:Mn = 1:3 possesses a large Brunauer?Emmett?Teller specific surface area (127 m² g^?1) with pore size 8.2 nm and exhibits the highest specific capacitance of 1215.5 F g^?1 at a scan rate 2 mV s^?1 with an excellent long-term cycling stability (?87.2% capacitance retention at 10 A g^?1 over 5000 cycles). This work also gives a comparison and explains the influence of different compositional ratios on the electrochemical properties of Ni-Mn-oxides. To demonstrate the possibility of commercial application, an asymmetric supercapacitor device has been constructed by using Ni-Mn-oxide (Ni:Mn = 1:3) as a positive electrode and activated carbon (AC) as a negative electrode. This battery-like device achieves a maximum energy density of 132.3 W h kg^?1 at a power density of 1651 W kg^?1 and excellent coulombic efficiency of 97% over 3000 cycles at 10 A g^?1.

Gold nanoparticle-doped three-dimensional reduced graphene hydrogel modified electrodes for amperometric determination of indole-3-acetic acid and salicylic acid

Three-dimensional (3D) networked nanomaterials have attracted great interest because of their unique porous and 3D-networked structures. In this work, a series of gold nanoparticle (AuNP) doped graphene hydrogel nanocomposites (AuNP-GHs) were synthesized through hydrothermal reaction under various conditions. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the AuNP-GH. The AuNP-GH was used to modify the glassy carbon electrode (GCE) for the detection of indole-3-acetic acid (IAA) and salicylic acid (SA) using chronoamperometric measurements. Under optimum conditions, the AuNP-GH/GCE exhibited linear response to IAA in the ranges of 0.8-4 μM and 4-128 μM, and to SA in the ranges of 0.8-8.4 μM and 8.4-188.4 μM. The detection limits (S/N = 3) were calculated to be 0.21 μM for IAA and 0.22 μM for SA. The proposed sensor showed good sensitivity and stability and hence it was applied in the detection of IAA and SA in spiked samples with satisfactory results.

Au nanoparticles supported on functionalized two-dimensional titanium carbide for the sensitive detection of nitrite

A novel electrochemical sensing platform based on a Au NPs/Ti₃C₂T_X composite was constructed.