Reviving the interest in the versatile drug nystatin: A multitude of strategies to increase its potential as an effective and safe antifungal agent

Nystatin is an antifungal molecule with a remarkable yet squandered versatility. In this review, its mechanism of action is explored, along with its extensive action spectrum and toxicity. A multitude of methodologies to tackle the drug's physical and chemical hurdles are outlined along with some proven-effective strategies to increase its activity and/or decrease its toxicity. A separate detailed section focused on micro and nanotechnology solutions addresses new drug delivery systems made of polymeric, metallic or lipid materials. Although the topical route depicts greater representativeness amongst these formulations, the intravenous, dental, oral, vaginal and inhalation routes are also mentioned. The unsuccessful previous attempts at developing parenteral formulations of nystatin or even the withdrawal of a nystatin-loaded multilamellar liposome should not divert research away from this drug. In fact, the interest in nystatin ought to be reawakened with the ongoing clinical trials on the promising nystatin-like genetically engineered derivate BSG005.

Silica-induced electron loss of silver nanoparticles

Despite the frequent use of silver nanoparticles (Ag NPs) embedded in materials for medical or optical applications, the effect of the matrix on the nanoparticle properties remains largely unknown. This study aims to shed light on the effect of an amorphous silica matrix on the structure and charge distribution of 55- and 147-atom silver nanoparticles by means of dispersion-corrected DFT calculations. Particular attention is paid to nanoparticle size and concentration effects and to the impact of the presence of native defects in the matrix. Covalent bonding between the silver nanoparticles and the matrix is found to occur at the interface. Such interface reconstruction involves the breaking of Si-O bonds, which systematically leads to the formation of Ag-Si bonds, and in some cases, to the formation of Ag-O ones. Interestingly, these interface reconstructions are accompanied by electron depletion of the nanoparticles, a substantial number of electrons being transferred from the two outer shells of the Ag NPs to the surrounding silica medium. The electrons lost by the nanoparticles are captured by the Si atoms involved in the interface bonds, but also, unexpectedly, by the undercoordinated silica defects that act as electron pumps and by the atoms of the silica network inside a few angströms spherical shell around the silver nanoparticle. The numbers of interface bonds and electrons transferred to the surrounding silica shell appear to be proportional to the surface area of the Ag NP. The electronic extension within silica goes beyond that attributable to the Ag NP spill-out. The presence of additional electrons in the matrix, especially on defects, is consistent with the experimental literature.

Evaluation of the Effects of Ag, Cu, ZnO and TiO2 Nanoparticles on the Expression Level of Oxidative Stress-Related Genes and the Activity of Antioxidant Enzymes in Escherichia coli, Bacillus cereus and Staphylococcus epidermidis

Although the molecular response of bacteria exposed to metal nanoparticles (NPs) is intensively studied, many phenomena related to their survival, metal uptake, gene expression and protein production are not fully understood. Therefore, this work aimed to study Ag-NPs, Cu-NPs, ZnO-NPs and TiO2-NPs-induced alterations in the expression level of selected oxidative stress-related genes in connection with the activity of antioxidant enzymes: catalase (CAT), peroxidase (PER) and superoxide dismutase (SOD) in Escherichia coli, Bacillus cereus and Staphylococcus epidermidis. The methodology used included: the extraction of total RNA and cDNA synthesis, the preparation of primers for selected housekeeping and oxidative stress genes, RT-qPCR reaction and the measurements of CAT, PER and SOD activities. It was established that the treatment of E. coli and S. epidermidis with NPs resulted mainly in the down-regulation of targeted genes, whilst the up-regulation of genes was confirmed in B. cereus. The greatest differences in the relative expression levels of tested genes occurred in B. cereus and S. epidermidis treated with TiO2-NPs, while in E. coli, they were observed under ZnO-NPs exposure. The changes found were mostly related to the expression of genes encoding proteins with PER and CAT-like activity. Among NPs, ZnO-NPs and Cu-NPs increased the activity of antioxidants in E. coli and B. cereus. In turn, TiO2-NPs had a major effect on enzymes activity in S. epidermidis. Considering all of the collected results for tested bacteria, it can be emphasised that the impact of NPs on the antioxidant system functioning was dependent on their type and concentration.

Spherical Silica Functionalized by 2-Naphthalene Methanol Luminophores as a Phosphorescence Sensor

Photoluminescence is known to have huge potential for applications in studying biological systems. In that respect, phosphorescent dye molecules open the possibility to study the local slow solvent dynamics close to hard and soft surfaces and interfaces using the triplet state (TSD: triplet state solvation dynamics). However, for that purpose, probe molecules with efficient phosphorescence features are required with a fixed location on the surface. In this article, a potential TSD probe is presented in the form of a nanocomposite: we synthesize spherical silica particles with 2-naphthalene methanol molecules attached to the surface with a predefined surface density. The synthesis procedure is described in detail, and the obtained materials are characterized employing transmission electron microscopy imaging, Raman, and X-ray photoelectron spectroscopy. Finally, TSD experiments are carried out in order to confirm the phosphorescence properties of the obtained materials and the route to develop phosphorescent sensors at silica surfaces based on the presented results is discussed.

Mesoporous silica nanoparticles containing copper or silver synthesized with a new metal source: Determination of their structure parameters and cytotoxic and irritating effects

One of the potential implementation of mesoporous silica nanomaterials (MSNs) is their use in biomedical applications as adsorbents or carriers of various bioactive substances. In this study, we attempted to fabricate silica nanomaterials containing copper and silver that were introduced into the MSN matrix, for the first time using oxalate compounds as a metal source. The syntheses were carried out using hydrothermal and impregnation methods. Structure studies revealed that the obtained nanoparticles were of a spheroidal shape and most had diameters in the range 200-500 nm. Silver and copper were found to be grouped into clusters in most samples, except in copper-decorated MSNs prepared with the impregnation method, which had an even distribution of metal atoms throughout the volume of the granule. An evaluation of the cytotoxic and irritating effects revealed that the preferred candidates for potential future applications in medicine or cosmetology among materials obtained with the presented method are the copper-conjugated MSNs.

Solid State Photoreduction of Silver on Mesoporous Silica to Enhance Antifungal Activity

A solid-state Ultraviolet-photoreduction process of silver cations to produce Ag0 nanostructures on a mesoporous silica is presented as an innovative method for the preparation of efficient environmental anti-fouling agents. Mesoporous silica powder, contacted with AgNO3, is irradiated at 366 nm, where silica surface defects absorb. The detailed characterization of the materials enables us to document the silica assisted photo-reduction. The appearance of a Visible (Vis) band centered at 470 nm in the extinction spectra, due to the surface plasmon resonance of Ag0 nanostructures, and the morphology changes observed in transmission electron microscopy (TEM) images, associated with the increase of Ag/O ratio in energy dispersive X-ray (EDX) analysis, indicate the photo-induced formation of Ag0. The data demonstrate that the photo-induced reduction of silver cation occurs in the solid state and takes place through the activation of silica defects. The activation of the materials after UV-processing is then tested, evaluating their antimicrobial activity using an environmental filamentous fungus, Aspergillus niger. The treatment doubled inhibitory capacity in terms of minimal inhibitory concentration (MIC) and biofilm growth. The antimicrobial properties of silver-silica nanocomposites are investigated when dispersed in a commercial sealant; the nanocomposites show excellent dispersion in the silicon and improve its anti-fouling capacity.

Innovative Bioactive Ag-SiO2/TiO2 Coating on a NiTi-Shape Memory Alloy: Structure and Mechanism of Its Formation

In recent years, more and more emphasis has been placed on the development and functionalization of metallic substrates for medical applications to improve their properties and increase their applicability. Today, there are many different types of approaches and materials that are used for this purpose. Our idea was based on a combination of a chemically synthesized Ag-SiO2 nanocomposite and the electrophoretic deposition approach on a NiTi-shape memory substrate. As a result, silver-silica coating was developed on a previously passivated alloy, which was then subjected to sintering at 700 °C for 2 h. The micrometer-sized coat-forming material was composed of large agglomerates consisting of silica and a thin film of submicron- and nano- spherical-shaped particles built of silver, carbon, and oxygen. Structurally, the coatings consisted of a combination of nanometer-sized silver-carbonate that was embedded in thin amorphous silica and siloxy network. The temperature impact had forced morphological and structural changes such as the consolidation of the coat-forming material, and the partial coalescence of the silver and silica particles. As a result, a new continuous complex ceramic coating was formed and was analyzed in more detail using the XPS, XRD, and Raman methods. According to the structural and chemical analyses, the deposited Ag-SiO2 nanocomposite material's reorganization was due to its reaction with a passivated TiO2 layer, which formed an atypical glass-like composite that consisted of SiO2-TiO2 with silver particles that stabilized the network. Finally, the functionalization of the NiTi surface did not block the shape memory effect.

An Organic-Inorganic Hybrid Nanocomposite as a Potential New Biological Agent

To solve the problem of human diseases caused by a combination of genetic and environmental factors or by microorganisms, intense research to find completely new materials is required. One of the promising systems in this area is the silver-silica nanocomposites and their derivatives. Hence, silver and silver oxide nanoparticles that were homogeneously distributed within a silica carrier were fabricated. Their average size was d = (7.8 ± 0.3) nm. The organic polymers (carboxymethylcellulose (CMC) and sodium alginate (AS)) were added to improve the biological features of the nanocomposite. The first system was prepared as a silver chlorine salt combination that was immersed on a silica carrier with coagulated particles whose size was d = (44.1 ± 2.3) nm, which coexisted with metallic silver. The second system obtained was synergistically interacted metallic and oxidized silver nanoparticles that were distributed on a structurally defective silica network. Their average size was d = (6.6 ± 0.7) nm. Physicochemical and biological experiments showed that the tiny silver nanoparticles in Ag/SiO2 and Ag/SiO2@AS inhibited E. coli, P. aeruginosa, S. aureus, and L. plantarum's cell growth as well as caused a high anticancer effect. On the other hand, the massive silver nanoparticles of Ag/SiO2@CMC had a weaker antimicrobial effect, although they highly interacted against PANC-1. They also generated reactive oxygen species (ROS) as well as the induction of apoptosis via the p53-independent mechanism.

Impact of an Engineered Copper-Titanium Dioxide Nanocomposite and Parent Substrates on the Bacteria Viability, Antioxidant Enzymes and Fatty Acid Profiling

Due to the systematic increase in the production of nanomaterials (NMs) and their applications in many areas of life, issues associated with their toxicity are inevitable. In particular, the performance of heterogeneous NMs, such as nanocomposites (NCs), is unpredictable as they may inherit the properties of their individual components. Therefore, the purpose of this work was to assess the biological activity of newly synthesized Cu/TiO2-NC and the parent nanoparticle substrates Cu-NPs and TiO2-NPs on the bacterial viability, antioxidant potential and fatty acid composition of the reference Escherichia coli and Bacillus subtilis strains. Based on the toxicological parameters, it was found that B. subtilis was more sensitive to NMs than E. coli. Furthermore, Cu/TiO2-NC and Cu-NPs had an opposite effect on both strains, while TiO2-NPs had a comparable mode of action. Simultaneously, the tested strains exhibited varied responses of the antioxidant enzymes after exposure to the NMs, with Cu-NPs having the strongest impact on their activity. The most considerable alternations in the fatty acid profiles were found after the bacteria were exposed to Cu/TiO2-NC and Cu-NPs. Microscopic images indicated distinct interactions of the NMs with the bacterial outer layers, especially in regard to B. subtilis. Cu/TiO2-NC generally proved to have less distinctive antimicrobial properties on B. subtilis than E. coli compared to its parent components. Presumably, the biocidal effects of the tested NMs can be attributed to the induction of oxidative stress, the release of metal ions and specific electrochemical interactions with the bacterial cells.

The Beneficial Mechanical and Biological Outcomes of Thin Copper-Gallium Doped Silica-Rich Bio-Active Glass Implant-Type Coatings

Silica-based bioactive glasses (SBG) hold great promise as bio-functional coatings of metallic endo-osseous implants, due to their osteoproductive potential, and, in the case of designed formulations, suitable mechanical properties and antibacterial efficacy. In the framework of this study, the FastOs®BG alkali-free SBG system (mol%: SiO2—38.49, CaO—36.07, P2O5—5.61, MgO—19.24, CaF2—0.59), with CuO (2 mol%) and Ga2O3 (3 mol%) antimicrobial agents, partially substituting in the parent system CaO and MgO, respectively, was used as source material for the fabrication of intentionally silica-enriched implant-type thin coatings (~600 nm) onto titanium (Ti) substrates by radio-frequency magnetron sputtering. The physico-chemical and mechanical characteristics, as well as the in vitro preliminary cytocompatibility and antibacterial performance of an alkali-free silica-rich bio-active glass coating designs was further explored. The films were smooth (RRMS < 1 nm) and hydrophilic (water contact angle of ~65°). The SBG coatings deposited from alkali-free copper-gallium co-doped FastOs®BG-derived exhibited improved wear performance, with the coatings eliciting a bonding strength value of ~53 MPa, Lc3 critical load value of ~4.9 N, hardness of ~6.1 GPa and an elastic modulus of ~127 GPa. The Cu and Ga co-doped SBG layers had excellent cytocompatibility, while reducing after 24 h the Staphylococcus aureus bacterial development with 4 orders of magnitude with respect to the control situations (i.e., nutritive broth and Ti substrate). Thereby, such SBG constructs could pave the road towards high-performance bio-functional coatings with excellent mechanical properties and enhanced biological features (e.g., by coupling cytocompatibility with antimicrobial properties), which are in great demand nowadays.

Current Insights on Antifungal Therapy: Novel Nanotechnology Approaches for Drug Delivery Systems and New Drugs from Natural Sources

The high incidence of fungal infections has become a worrisome public health issue, having been aggravated by an increase in host predisposition factors. Despite all the drugs available on the market to treat these diseases, their efficiency is questionable, and their side effects cannot be neglected. Bearing that in mind, it is of upmost importance to synthetize new and innovative carriers for these medicines not only to fight emerging fungal infections but also to avert the increase in drug-resistant strains. Although it has revealed to be a difficult job, new nano-based drug delivery systems and even new cellular targets and compounds with antifungal potential are now being investigated. This article will provide a summary of the state-of-the-art strategies that have been studied in order to improve antifungal therapy and reduce adverse effects of conventional drugs. The bidirectional relationship between Mycology and Nanotechnology will be also explained. Furthermore, the article will focus on new compounds from the marine environment which have a proven antifungal potential and may act as platforms to discover drug-like characteristics, highlighting the challenges of the translation of these natural compounds into the clinical pipeline.

Silver, copper, and copper hydroxy salt decorated fumed silica hybrid composites as antibacterial agents

Decoration of matrices such as silicates, graphene, etc. is an efficient technique in order to develop multifunctional materials with enhanced properties, which are of use for microbial control. Consequently, it leads to an increased search for alternative matrices and synthesis methods for decoration. Herein, decoration of a fumed silica is proposed, with structures that consisted of silver (Ag@FS), copper hydroxy salt (CuHS@FS), and copper (Cu@FS), for antibacterial applications. With the simple combination of the metal precursor salt, the appropriate solvent, and the fumed silica, the composites were obtained by one-pot solvothermal (200 °C for 1 h), rapid (2 min) microwave assisted precipitation, and by ascorbic acid chemical reduction, respectively. Characterization by powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FE-SEM) proved the successful decoration of the fumed silica with layered copper hydroxy salt (90 width x 970 length nm) and round-like metallic Ag (210 nm) and Cu (370 nm) particles. Fourier transformed infrared (FTIR) and Raman spectroscopy evidenced the presence of SiOMetal interactions. The antibacterial activity was evaluated against the Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, giving inhibition and bactericidal values between 3-12 mg/ mL and 12-24 mg/ mL, respectively, with a maximum ion liberation ratio of 1.4 %. The application of the fumed silica presented here, is an attractive alternative to existing matrices, in order to fabricate multifunctional materials, as it is ready-to-use and feasible for large-scale production. Moreover, the applied synthesis routes provide rapid approaches for decoration, creating composites useful for antibacterial applications.

Functionalization of the NiTi Shape Memory Alloy Surface by HAp/SiO2/Ag Hybrid Coatings Formed on SiO2-TiO2 Glass Interlayer

The surface modification of NiTi shape memory alloys is a method for increasing their multi-functionalities. In our solution, hydroxyapatite powder was mixed with a chemically synthesized silicon dioxide/silver (nSiO2/Ag) nanocomposite in a different weight ratio between components (1:1, 5:1, and 10:1) and then electrophoretically deposited on the surface of the NiTi alloy, under various time and voltage conditions. Subsequently, uniform layers were subjected to heat treatment at 700 °C for 2 h in an argon atmosphere to improve the strength of their adhesion to the NiTi substrate. A change in linear dimensions of the co-deposited materials during the sintering process was also analyzed. After the heat treatment, XRD, Raman, and Scanning Electron Microscopy (SEM) + Energy Dispersive Spectrometer (EDS) studies revealed the formation of completely new composite coatings, which consisted of rutile and TiO2-SiO2 glass with silver oxide and HAp particles that were embedded into such coatings. It was found that spalling characterized the 1:1 ratio coating, while the others were crack-free, well-adhered, and capable of deformation to 3.5%. Coatings with a higher concentration of nanocomposite were rougher. Electrochemical impedance spectroscopy (EIS) tests in Ringer's solution revealed the capacitive behavior of the material with high corrosion resistance. The kinetics and susceptibility to pitting corrosion was the highest for the NiTi electrode that was coated with a 5:1 ratio HAp/nSiO2/Ag hybrid coating.

Olax scandens Mediated Biogenic Synthesis of Ag-Cu Nanocomposites: Potential Against Inhibition of Drug-Resistant Microbes

In the present study, we have synthesized silver-copper nanocomposites (Ag-Cu NCs) using an Olax scandens leaf extract (green synthesis method) and evaluated their antimicrobial potential against less susceptible pathogens. The kinetics of Ag-Cu NCs synthesis was followed by UV-VIS and fluorescence spectroscopy. The physicochemical characterization of as-synthesized Ag-Cu NCs was executed using electron microscopy, Energy Dispersive X-Ray, Fourier Transform Infrared Spectroscopy, and a Differential Light Scattering method. As-synthesized Ag-Cu NCs induced the formation of Reactive Oxygen Species (ROS), thereby causing alteration and decrementation of cellular proteins, DNA, lipids, etc., and eventually leading to cell death, as determined by a Live/Dead assay. Next, we assessed the anti-biofilm potential of as-synthesized Ag-Cu NCs against biofilm forming bacteria. The as-synthesized Ag-Cu NCs, when compared to monometallic silver nanoparticles, exhibited significantly higher anti-microbial activity against both sensitive as well as drug resistant microbial isolates.

Impact of temperature on the physicochemical, structural and biological features of copper-silica nanocomposites

Classical wet chemical synthesis was used to fabricate a hybrid composite that contained copper nanoparticles (average size ∼1 nm), which were embedded into a silicon oxide carrier. The structural and chemical alternations in the copper-functionalized silica were investigated in systems that were sintered at 573 K, 873 K, 1173 K, and 1473 K. A general trend, which was associated with the transformation of metallic copper with a cubic structure into copper(II) oxide with a monoclinic structure in the heat-treated systems, was found. XPS and FTIR spectroscopies also revealed the presence of copper(I) oxide, which formed a shell around the CuO. SEM and TEM showed gradual densification of the hybrid system at ever higher sintering temperatures, which corresponded with the gradual copper agglomeration. A temperature of 873 K was determined to be the temperature at which amorphous silica was transformed into cristoballite and tridymite, as well as the formation of a bulk-like copper structure. In relation to the physicochemical and structural data, high antimicrobial features that had a relatively low toxicity effect on the normal human fibroblasts (NHDF) below 250 mg/L was found for the initial copper-silica composite and the samples that were sintered at 573 K. In turn, a significant decrease in the biological impact was observed in the samples that were sintered at temperatures above 573 K. As a result, the paper discusses the model of structural modifications in copper-silica nanocomposite concerning their biological impact that was developed.

Physicochemical and structural features of heat treated silver-silica nanocomposite and their impact on biological properties

In the last few decades, many nanostructures with varying properties and possible applications have been developed. These materials have been intended to work in various environmental temperature conditions. In this context, the main challenge has been to comprehend the impact of synergic interaction between individual elements included in non-annealed materials in relation to systems subjected to temperature impact. Another problem has corresponded to the impact of thermal modification on organisms such as bacteria and human cells. Such problems can be solved by the fabrication of a nanocomposite with mono-dispersed 8 nm silver (Ag⁰ or Ag⁺) embedded into a silica carrier, followed by the analysis of the impact of heat treatment under various temperature conditions on its physicochemical features. Therefore, methodical studies reported in this text have shown an increase of silver particle size up to 170 nm, a decrease of its concentration, as well as the formation of sub-nanometer Ag⁺ and/or Ag²⁺ clusters as the temperature rises to 1173 K. In turn, the structurally disordered silica carrier had been entirely transformed to cristobalite and tridymite only at 1473 K as well as partial reduction of Ag²⁺ to Ag⁺. Simultaneously, inhibition of growth of Gram-positive and Gram-negative bacteria, as well as an increase in cytotoxicity towards human cells was observed as the temperature rose. As a final point, for the first time, a "pseudo" phase diagram of the structural alterations in the Ag/SiO₂ nanocomposite has been created, as well as a model of silver-silica transformation to biological systems has been developed.

Toward the Development of an Innovative Implant: NiTi Alloy Functionalized by Multifunctional β-TCP+Ag/SiO2 Coatings

In recent years, one of the more important and costly problems of modern medicine is the need to replace or supplement organs in order to improve the quality of human life. In this field, promising solutions seem to have been implants which are based on NiTi alloys with shape memory effects. Unfortunately, this material is susceptible to the corrosion and release of toxic nickel to the human organism. Hence, its application as a long-term material is strongly limited. Therefore, this paper presents a new solution which should help to improve the functionality of the NiTi alloy and elongate its medical stability to use. The idea was focused on functionalization of the implant surface by a biocompatible, multifunctional coating without any impact on the features of the substrate, i.e., the martensitic transformation responsible for shape memory effects. For this purpose, we prepared a colloidal suspension, composed of β-TCP (particle size ∼450 nm) and the Ag/SiO₂ nanocomposite which due to the electrophoretic deposition (EPD) led to the formation of structurally atypical calcium phosphosilicate coating. Those biomaterials formed a crack-free coating, adhering well to the NiTi surface when distributed over the entire surface, with low concentration of metallic and oxide silver (<3 at. %). At the same time, the coat-forming materials had resulted in the growth of a Gram-negative bacterial biofilm. Additionally, the additive of the silver-silica composite enhances cell proliferation, effectively a few times higher than commonly used coat-forming materials (e.g., pure β-TCP).

Encapsulation of Biosynthesized Nanosilver in Silica Composites for Sustainable Antimicrobial Functionality

Silver nanoparticles (AgNPs) have become known as a broad-spectrum antimicrobial agent. The antimicrobial activity of AgNPs is dependent on the particle size and the dispersion status. In this study, a simple and effective approach is developed for sequestering the biosynthesized AgNPs in silica composites during the gel formation of MCM-41. Composites with different Ag concentrations of 0.034% (Ag1@MCM-41), 0.151% (Ag2@MCM-41), and 0.369% (Ag3@MCM-41) are synthesized and then heated at 400 °C to produce Ag1@MCM-41H, Ag2@MCM-41H, and Ag3@MCM-41H, respectively. The samples are characterized by flame atomic absorption spectrometry, Fourier-transform infrared spectroscopy, X-ray diffraction, N2 physisorption, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The AgNPs are confirmed to be highly dispersed in the amorphous silica framework. The antimicrobial activity of the AgNP-silica samples is investigated against Staphylococcus aureus, Escherichia coli, and Candida albicans using the cup-plate and the plate-count techniques. The results show an excellent antimicrobial effect of these samples against the studied microorganisms. Importantly, the AgNP-silica samples are found to be stable up to 58 months under ambient conditions. These stable and powerful antimicrobial composites provide a more practical and effective strategy for combating biomedical pathogens and public health threats.

Biogenic nanosilver synthesized in Metarhizium robertsii waste mycelium extract - As a modulator of Candida albicans morphogenesis, membrane lipidome and biofilm

Due to low efficacy of classic antimicrobial drugs, finding new active preparations attracts much attention. In this study an innovative, cost-effective and environmentally friendly method was applied to produce silver nanoparticles (AgNPs) using filamentous fungi Metarhizium robertsii biomass waste. It was shown that these NPs possess prominent antifungal effects against C. albicans, C. glabrata and C. parapsilosis reference strains. Further detailed studies were performed on C. albicans ATCC 90028. AgNPs kill curve (CFU method and esterase-mediated reduction of fluorescein diacetate); fractionally inhibitory concentration index (FICI) with fluconazole (FLC); effect on fungal cell membrane permeability (propidium iodide (PI) staining), membrane lipids profile (HPLC-MS), yeast morphotypes and intracellular reactive oxygen species level (H₂DCFDA probe) were investigated. Anti-adhesive and anti-biofilm properties of AgNPs (alone and in combination with FLC) were also tested. Biosafety of AgNPs use was assessed in vitro in cytotoxicity tests against L929 fibroblasts, pulmonary epithelial A549 cell line, and red blood cells. Significant reduction in the viability of yeast cells treated with AgNPs was shown within 6 h. The proportion of C. albicans PI-positive cells increased in a dose and time-dependent manner. Changes in the qualitative and quantitative profile of cell membrane lipids, including significant decline in the quantity of most phospholipid species containing C18:2 and an increase in the amount of phospholipids containing C18:1 acyl species were observed after yeast exposure to AgNPs. CLSM images showed an enhancement in ROS intracellular accumulation in C. albicans treated with biogenic nanosilver. C. albicans transformation from yeast to hyphal forms was also reduced. AgNPs decreased adhesion of yeast to abiotic surfaces, as well as acted synergistically with FLC against sessile population. At fungicidal and fungistatic concentrations, they were non-toxic to mammalian cells. Obtained results confirm suitability of our “green synthesis” method to produce AgNPs with therapeutic potential against fungal infections.

Control of the Size of Silver Nanoparticles and Release of Silver in Heat Treated SiO₂-Ag Composite Powders

The growth of silver nanoparticles, the activation energy for silver particle growth, and the release of silver species in heat treated SiO2-Ag composite powders are investigated. The silver particle growth is controlled by heat treatment for 75 min of the as-synthesized SiO2-Ag composite powder at 300–800 °C. During heat treatment the mean size of the Ag particles increases from 10 nm up to 61 nm with increasing temperature, however, the particle size distribution widens and the mean size increases with increasing heat treatment temperature. Based on X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) studies, silver particles are crystalline and in a metallic state after annealing in all SiO2-Ag composite powders. The growth of Ag particles is suggested to take place via diffusion and Ostwald ripening. The activation energy for particle growth was determined as 0.14 eV. The dissolution of silver in aqueous solutions from the SiO2-Ag composites heat treated, at 300 °C, 600 °C, and 700 °C, was investigated by varying pH and temperature. The dissolution was reduced in all conditions with increasing silver particle size, i.e., when the total surface area of Ag particles is reduced. It is suggested that the dissolution of silver from the composite powders can conveniently be adjusted by controlling the Ag particle size by the heat treatment of the composite powder.