A novel approach based on supramolecular solvents microextraction for quick detection of perfluoroalkyl acids and their precursors in aquatic food

Per-and polyfluoroalkyl substances (PFASs) have garnered significant attention owing to their prevalence and adverse effects on humans. The direct dietary intake of perfluoroalkyl acids (PFAAs) and PFAAs precursors (pre-PFAAs) biotransformation are considered major contributors to human exposure to PFASs. However, little information is available on analytical methods for the simultaneous detection of PFAAs and pre-PFAAs. In the present study, a single-step sample-treatment-based supramolecular solvents-dispersed liquid-liquid microextraction (SUPRASs-DLLME) technique was established for the analysis of 16 PFAAs and 7 pre-PFAAs in aquatic food. SUPRASs were synthesized using 1-heptanol (3 mL) and tetrahydrofuran (4 mL), which were self-assembled in water. The parameters for microextraction, such as extraction method and enrichment capacity, were optimized. Under the optimum conditions, the limit of detection (LOD) and limit of quantification (LOQ) were 0.03-0.15 ng·g-1 and 0.1-0.5 ng·g-1, respectively. Good linearities (R2 > 0.996) were obtained for all the target compounds, and the recoveries ranged 81.1-120 % with relative standard deviations (RSDs) lower than 20 %. This method was applied to the analysis of 16 PFAAs and 7 pre-PFAAs in aquatic food samples (crabs, prawns, and fish). This study provides a new idea for analyzing other pollutants in biological samples.

Development of a supramolecular solvent-based extraction method for application to quantitative analyses of a wide range of organic contaminants in indoor dust

This study investigates the efficacy of supramolecular solvent (SUPRAS) in extracting a diverse spectrum of organic contaminants from indoor dust. Initially, seven distinct SUPRAS were assessed across nine categories of contaminants to identify the most effective one. A SUPRAS comprising Milli-Q water, tetrahydrofuran, and hexanol in a 70:20:10 ratio, respectively, demonstrated the best extraction performance and was employed for testing a wider array of organic contaminants. Furthermore, we applied the selected SUPRAS for the extraction of organic compounds from the NIST Standard Reference Material (SRM) 2585. In parallel, we performed the extraction of NIST SRM 2585 with conventional extraction methods using hexane:acetone (1:1) for non-polar contaminants and methanol (100%) extraction for polar contaminants. Analysis from two independent laboratories (in Norway and the Czech Republic) demonstrated the viability of SUPRAS for the simultaneous extraction of twelve groups of organic contaminants with a broad range of physico-chemical properties including plastic additives, pesticides, and combustion by-products. However, caution is advised when employing SUPRAS for highly polar contaminants like current-use pesticides or volatile substances like naphthalene.

Nitrophenols in the environment: An update on pretreatment and analysis techniques since 2017

Nitrophenols, a versatile intermediate, have been widely used in leather, medicine, chemical synthesis, and other fields. Because these components are widely applied, they can enter the environment through various routes, leading to many hazards and toxicities. There has been a recent surge in the development of simple, rapid, environmentally friendly, and effective techniques for determining these environmental pollutants. This review provides a comprehensive overview of the latest research progress on the pretreatment and analysis methods of nitrophenols since 2017, with a focus on environmental samples. Pretreatment methods include liquid-liquid extraction, solid-phase extraction, dispersive extraction, and microextraction methods. Analysis methods mainly include liquid chromatography-based methods, gas chromatography-based methods, supercritical fluid chromatography. In addition, this review also discusses and compares the advantages/disadvantages and development prospects of different pretreatment and analysis methods to provide a reference for further research.

Food and environmental safety monitoring platform based on Tb(III) functionalized HOF hybrids for ultrafast detection of thiabendazole and 2-chlorophenol

Development of efficient and intelligent method for detecting harmful agrochemicals in resource-limited settings remains an urgent need to ensure food and environmental safety. Herein, a novel dual-emitting Tb3+-modified hydrogen-bonded organic framework (Tb@TBTC, TBTC is the ligand of HOF-TBTC.) with visible green fluorescence has been prepared through coordination post-synthetic modification. Tb@TBTC can be designed as a fluorescence sensor for the identification of two harmful carcinogenic pesticides, thiabendazole (TBZ) and 2-chlorophenol (2-CP) with high sensitivity, high efficiency and excellent selectivity. Tb@TBTC can also adsorb 2-CP with high adsorption rate. In realistic fruit juice and river water samples, the detection limits of Tb@TBTC toward TBZ and 2-CP are as low as 2.73 μM and 2.18 μM, respectively, demonstrating the feasibility in practical application. Furthermore, an intelligent real-time and on-site monitoring platform for 2-CP detection is constructed based on Tb@TBTC-agarose hydrogel films with the assistance of back propagation neural network, which can efficiently and accurately determine the concentration of 2-CP from fluorescence images through human-machine interaction. This work presents a facile pathway to prepare Tb@HOF fluorescent sensor for food and ecological environment safety, which is highly promising for preventing human disease and improving global public health.

A study on the enrichment mechanism of three nitrophenol isomers in environmental water samples by charge transfer supramolecular-mediated hollow fiber liquid-phase microextraction

To explore the mechanism of extraction and enrichment of three nitrophenol isomers by charge-transfer supramolecular synergistic three-phase microextraction system, a charge transfer supramolecular-mediated hollow fiber liquid-phase microextraction (CTSM-HF-LPME) combined with high-performance liquid chromatography-ultraviolet detector (HPLC-UV) method was established for the determination of real environmental water samples. In this study, the three nitrophenols (NPs) formed charge-transfer supramolecules with electron-rich hollow fibers, which promoted the transport of NPs in the three-phase extraction system and greatly increased the EFs of NPs. The relationships between the EFs of NPs and their solubility, pK_a, apparent partition coefficient, equilibrium constant, and structural property parameters were investigated and discussed. At the same time, most of factors affecting the EFs of NPs were investigated and optimized, such as the type of extraction solvent, pH value of sample phase and acceptor phase, extraction time, and stirring speed. Under optimal conditions, the EFs of o-nitrophenol, m-nitrophenol, and p-nitrophenol were 163, 145, and 87, respectively. With good linearity in the range of 5 × 10^-7 ~ 1 µg/mL, and the limit of detection of 0.1 pg/mL, the relative standard deviations of the method precision were lower than 7.4%, and the average recoveries were between 98.6 and 106.4%. This method had good selectivity and sensitivity, satisfactory precision, and accuracy and had been successfully applied to the trace detection of real water samples.

Efficient analyses of triazole fungicides in water, honey and soy milk samples by popping candy-generated CO2 and sugaring-out-assisted supramolecular solvent-based microextraction prior to HPLC determinations

An enrichment method, namely popping candy-generated CO₂ and sugaring-out-assisted supramolecular solvent-based microextraction (PGS-SUPRA), was investigated for the determination of triazole fungicide residues in water, honey and soy milk samples. The extraction process was carried out by adding popping candies into a centrifuge tube. Consequently, rapid dispersion and mass transfer of extractants can be achieved without using dispersants and auxiliary devices, and therefore, the extraction efficiency increased. The extraction parameters affecting the efficiency of the developed method were investigated. The presented method was then analysed by high-performance liquid chromatography. Under the selected condition, the wide linearity of triazole fungicides after preconcentration by the proposed microextraction method ranged from 30 to 1000 μg L^-1 for triadimefon and from 90 to 1000 μg L^-1 for myclobutanil, tebuconazole and hexaconazole, with a coefficient for determination (R ²) greater than 0.992. The limits of detection (LODs) and limits of quantitation (LOQs) were in the range of 10-30 μg L^-1 and 30-90 μg L^-1, respectively. The precisions were assessed from the relative standard deviations (RSDs) of the retention time and peak area obtained from intra- (n = 3) and inter-day (n = 3 × 5) experiments, and were greater than 1.66% and 13.52%, respectively. Moreover, the proposed method provided high enhancement factors (EnFs) ranging from 14 to 51 folds. This technique has been prosperously applied for the extraction of fungicide residues in water, honey and soy milk samples with a recovery within the range of 60-114%. Overall, the developed method was found to be advantageous as compared with other sample preparation methods.

Colorimetric sensing strategy for detection of cysteine, phenol cysteine, and phenol based on synergistic doping of multiple heteroatoms into sponge-like Fe/NPC nanozymes

Nanozymes have both the high catalytic activity of natural enzymes and the stability and economy of mimetic enzymes. Research on nanozymes is rapidly emerging, and the continuous development of highly catalytic active nanozymes is of far-reaching significance. This work reports heteroatomic nitrogen (N) and phosphorus (P) double-doped mesoporous carbon structures and metallic Fe coordination generated sponge-like nanozymes (Fe/NPCs) with good peroxidase activity. On this basis, we constructed a highly sensitive colorimetric sensor with cysteine and phenol as simulated analytes using Fe/NPCs nanozymes, and the response limits reached 53.6 nM and 5.4 nM, respectively. Besides, the method has high accuracy in the detection of cysteine and phenol at low concentrations in serum and tap water, which lays a foundation for application in the fields of environmental protection and biosensors.

Liquid-Phase Microextraction Approaches for Preconcentration and Analysis of Chiral Compounds: A Review on Current Advances

Chirality is a critical issue in pharmaceutics, forensic chemistry, therapeutic drug monitoring, doping control, toxicology, or environmental investigations as enantiomers of a chiral compound can exhibit different activities, i.e., one enantiomer can have the desired effect while the other one can be inactive or even toxic. To monitor enantioselective metabolism or toxicokinetic/toxicodynamic mechanisms in extremely low content in biological or environmental matrices, sample preparation is vital. The present review describes current status of development of liquid-phase microextraction approaches such as hollow fiber liquid-phase microextraction (HF-LPME), electromembrane extraction (EME), dispersive liquid-liquid microextraction (DLLME), and supramolecular solvent-based microextraction (SSME), used for sample preparation of enantiomers/chiral compounds. The advantages and limitations of the above techniques are discussed. Attention is also focused on chiral separation approaches commonly applied to study the stereo-selective metabolism or toxicokinetic/toxicodynamic mechanisms of enantiomers in the biological and environmental samples.

Use of green alternative solvents in dispersive liquid-liquid microextraction: A review

Dispersive liquid-liquid microextraction is one of the most widely used microextraction techniques currently in the analytical chemistry field, mainly due to its simplicity and rapidity. The operational mode of this approach has been constantly changing since its introduction, adapting to new trends and applications. Most of these changes are related to the nature of the solvent employed for the microextraction. From the classical halogenated solvents (e.g., chloroform or dichloromethane), different alternatives have been proposed in order to obtain safer and non-pollutants microextraction applications. In this sense, low-density solvents, such as alkanols, switchable hydrophobicity solvents, and ionic liquids were the first and most popular replacements for halogenated solvents, which provided similar or better results than these classical dispersive liquid-liquid microextraction solvents. However, despite the good performances obtained with low-density solvents and ionic liquids, researchers have continued investigating in order to obtain even greener solvents for dispersive liquid-liquid microextraction. For that reason, in this review, the evolution over the last five years of the three types of solvents already mentioned and two of the most promising solvent alternatives (i.e., deep eutectic solvents and supramolecular solvents), have been studied in detail with the purpose of discussing which one provides the greenest alternative.

Supramolecular solvent-based micro-extraction of pesticides in food and environmental samples

Supramolecular solvent-based micro-extraction is a very important green technique for the isolation and pre-concentration of pesticide residues in food and environmental samples prior to their chromatographic analysis. The attractive features of supramolecular solvent-based micro-extraction include its simplicity, high pre-concentration factor, fastness, accuracy, low cost, less consumption of chemical reagents and environmental friendliness. The supramolecular solvent is generated from a ternary mixture of amphiphiles, water and a water miscible dispersion and coacervating solvent. Tehydrofuran is one of the solvents commonly used as both a dispersion solvent and a coacervating agent. This paper gives a recent comprehensive review on the application of alkanols as amphiphiles during supramolecular solvent-based micro-extraction of pesticide residues in food and environmental samples. Other researchers used long chain fatty acids as amphiphiles during pesticide analysis in food and environmental samples using supramolecular solvent-based micro-extraction, and this is discussed in this paper. The incorporation of ferrofluids in supramolecular solvents enables phase separation using a magnet instead of the time-consuming centrifugation technique. This paper also gives a detailed review of the application of ferrofluid-based supramolecular solvent micro-extraction of pesticide residues in food and environmental samples.

High throughput analysis of 21 perfluorinated compounds in drinking water, tap water, river water and plant effluent from southern China by supramolecular solvents-based microextraction coupled with HPLC-Orbitrap HRMS

The present work reported a high-throughput strategy for the analysis of 21 perfluorinated compounds (PFCs) in drinking water, tap water, river water and plant effluent from southern China by supramolecular solvent (SUPARS) vortex-mixed microextraction combined with high performance liquid chromatography-Orbitrap high resolution mass spectrometry (HPLC-Orbitrap HRMS). The SUPRAS without heating assistance is less solvent-consumption, meeting the requirements for green environmental protection and sustainable development. Parameters in the microextraction such as volume of dodecanol and tetrahydrofuran (THF), vortexing extraction and centrifugation time, salt concentration were investigated. The optimal extraction conditions were 250 μL of undecanol, 1.0 mL of THF and 20.0% (w/v, 4 g) NaCl. Under the optimum conditions, method limit of detection and method limit of quantitation in the ranges of 0.01-0.08 μg/L and 0.03-0.25 μg/L, good recoveries (72.5-117.8%) and intra-day precision (1.1-11.2%, n = 6), high enrichment factors (48-78) were obtained. The developed method was successfully applied for analysis of PFCs in 13 drinking water, tap water, river water and plant effluent samples collected from southern China. Perfluorobutane sulfonic acid was detected in one river water with concentration of 0.48 μg/L and 1H,1H,2H,2H-Perfluorooctane sulfonic acid was detected in one river water and two plant effluent samples with concentrations in the range of 0.14-0.67 μg/L.

Magnetic nanoparticles assisted dispersive liquid-liquid microextraction of chloramphenicol in water samples

This work describes the development of a new methodology based on magnetic nanoparticles assisted dispersive liquid-liquid microextraction (DLLME-MNPs) for preconcentration and extraction of chloramphenicol (CAP) antibiotic residues in water. The approach is based on the use of decanoic acid as the extraction solvent followed by the application of MNPs to magnetically retrieve the extraction solvent containing the extracted CAP. The coated MNPs were then desorbed with methanol, and the clean extract was analysed using ultraviolet-visible spectrophotometry. Several important parameters, such as the amount of decanoic acid, extraction time, stirring rate, amount of MNPs, type of desorption solvent, salt addition and sample pH, were evaluated and optimized. Optimum parameters were as follows: amount of decanoic acid: 200 mg; extraction time: 10 min; stirring rate: 800 rpm; amount of MNPs: 60 mg; desorption solvent: methanol; salt: 10%; and sample pH, 8. Under the optimum conditions, the method demonstrated acceptable linearity (R ² = 0.9933) over a concentration range of 50-1000 µg l^-1. Limit of detection and limit of quantification were 16.5 and 50.0 µg l^-1, respectively. Good analyte recovery (91-92.7%) and acceptable precision with good relative standard deviations (0.45-6.29%, n = 3) were obtained. The method was successfully applied to tap water and lake water samples. The proposed method is rapid, simple, reliable and environmentally friendly for the detection of CAP.

A simple strategy based on fibers coated with surfactant-functionalized multiwalled carbon nanotubes to improve the properties of solid-phase microextraction of phenols in aqueous solution

Methods and experiments

In this study, a functionalized multiwalled carbon nanotube (MWCNT)-coated solid-phase microextraction (SPME) fiber was developed for concentrating analytes in aqueous samples. Sodium deoxycholate (NaDC) was used as a dispersing agent for non-covalent modification of MWCNTs. The coating showed porous structure and large adsorption capacity. To investigate the capability of this MWCNTs/NaDC SPME fiber, it was applied to the analysis of phenols in aqueous solution. After extraction, the analytes were desorbed in an acetonitrile–water solution and analyzed using high-performance liquid chromatography.

Results

The MWCNTs/NaDC fiber exhibited good analytical performance, and fine preparation reproducibility was obtained with the relative standard deviations (RSDs) ranging from 4.9% to 10.2% (n = 6) in one batch, from 5.7% to 11.9% (n = 3) among different batches. Under the optimum extraction conditions, the detection limits were 0.15–0.30 ng/mL(S/N = 3), the linear detection ranges were 1–100 ng/mL (R² ≥ 0.9997) for these analytes, and good recoveries (80.3–95.4%) were obtained for the spiked samples.

Conclusion

This is a simple and accurate pretreatment method for the analysis of phenols in aqueous samples.

A Simple in Syringe Low Density Solvent-Dispersive Liquid Liquid Microextraction for Enrichment of Some Metal Ions Prior to Their Determination by High Performance Liquid Chromatography in Food Samples

A simple and highly sensitive method is developed for the simultaneous determination of Ni2+, Cr2O72-, Co2+, and Hg2+ by using in syringe low density solvent-dispersive liquid liquid microextraction (ISLD-DLLME), followed by high performance liquid chromatography with a UV detector. The four metal ions were derivatized with pyrrolidine dithiocarbamate (PDC) based on complexation before their enrichment by ISLD-DLLME in which 1-octanol and methanol were used as the extraction solvent and the dispersive solvent, respectively. The extraction was performed in a commercially available syringe under vortex agitation. Phase separation was achieved without centrifugation, and the extraction phase was easily collected by moving the syringe plunger. Parameters affecting the extraction efficiency were studied and optimized. Under the optimum conditions, the four metal-PDC complexes were detected within 18 min, and ISLD-DLLME could increase the detection sensitivity in the range of 64-230 times compared to the direct HPLC analysis. The obtained limits of detection (LODs) were found to be in the range of 0.011-2.0 µg L-1. The applicability of the method is demonstrated for freshwater fish, shrimp, and shellfish samples. In addition, the results are in good agreement with those obtained by inductively-coupled plasma-optical emission spectrometry (ICP-OES).

Field-amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE-ultraviolet (UV) detection based on the on-line preconcentration strategy of field-amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4-chlorophenol (4-CP), 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and 2,6-dichlorophenol (2,6-DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4-CP, 2-CP, 2,4-DCP, 2,4,6-TCP, and 2,6-DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI-CZE-UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018-0.019 µg/mL and 0.0089-0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006-0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6-TCP, 2,4-DCP, and 2-CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0-119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37-8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.

Organic Analysis of Environmental Samples Using Liquid Chromatography with Diode Array and Fluorescence Detectors: An Overview

This overview is focused to provide an useful guide of the families of organic pollutants that can be determined by liquid chromatography operating in reverse phase and ultraviolet/fluorescence detection. Eight families have been classified as the main groups to be considered: carbonyls, carboxyls, aromatics, phenols, phthalates, isocyanates, pesticides and emerging. The references have been selected based on analytical methods used in the environmental field, including both the well-established procedures and those more recently developed.