Fluorinated PAMAM-Arginine Carrier Prodrugs for pH-Sensitive Sustained Ibuprofen Delivery

OBJECTIVE

The development of an efficient, multifunctional drug delivery system overcoming different obstacles generally associated with drug formulations, including the poor accumulation of the active principle in the target site and its sustained release for prolonged time.

METHODS

Our study proposes the development of a fluorinated poly(amidoamine) (PAMAM) carrier prodrug combining drug release boosted in alkaline environments with a possible implementation in 19F MRI applications. In particular, we functionalized the terminal primary amines of PAMAM G2 and G4 through an ad hoc designed fluorinated ibuprofen-arginine Michael acceptor to obtain multifunctional ibuprofen-PAMAM-Arg conjugates.

RESULTS

These carriers demonstrated pH-dependent and sustained ibuprofen release for more than 5 days. This advantage was observed in both weak alkaline and physiological buffer solutions, allowing to overcome the limits associated to the burst release from similar fluorinated Arg-PAMAM dendrimers with ibuprofen physically encapsulated.

CONCLUSION

These findings, coupled to the high biocompatibility of the system, suggest a potential synergistic biomedical application of our conjugates, serving as vehicles for drug delivery and as 19F magnetic resonance imaging contrast agents.

Understanding Matrix Stiffness in Vinyl Polymer Hydrogels: Implications in Bone Tissue Engineering

Matrix elasticity helps to direct bone cell differentiation, impact healing processes, and modify extracellular matrix deposition, all of which are required for tissue growth and maintenance. In this work, we evaluated the role of inorganic nanocrystals or mineral inducers such as nanohydroxyapatite, alkaline phosphatase, and nanoclay also known as montmorillonite deposited on vinyl-based hydrogels in generating matrices with different stiffness and their role in cell differentiation. Poly-2-(dimethylamino)ethyl methacrylate (PD) and poly-2-hydroxypropylmethacrylamide (PH) are the two types of vinyl polymers chosen for preparing hydrogels via thermal cross-linking. The hydrogels exhibited porosity, which decreased with an increase in stiffness. Each of the compositions is non-cytotoxic and maintains the viability of pre-osteoblasts (MC3T3-E1) and human bone marrow mesenchymal stem cells (hBMSCs). The PD hydrogels in the presence of ALP showed the highest mineralization ability confirmed through the alizarin assay and a better structural environment for their use as scaffolds for tissue engineering. The study reveals that understanding such interactions can generate hydrogels that can serve as efficient 3D models to study biomineralization.

Synthesis and self-assembly of cytidine- and guanosine-based copolymers

The base pairing property and the “melting” behavior of oligonucleotides can take advantage to develop new smart thermoresponsive and programmable materials.

Synthesis, Morphology, and Rheological Evaluation of HPMA (N-2-Hydroxypropyl Methacrylamide)-PCL (Polycaprolactone) Conjugates

The design, synthesis, and physicochemical characterization of conjugates are arduous and tedious processes. Several synthetic pathways for polymeric conjugation have been reported; however, conjugation through monomers with suitable reaction conditions can be a simple and robust approach. In the present study, three different conjugates of hydrophilic N-2-hydroxypropyl methacrylamide (HPMA) and hydrophobic polycaprolactone (PCL) were synthesized. The followed synthetic pathway not only was simple and robust but also reduced the overall synthetic steps as well as harsh reaction conditions significantly. In a nutshell, three conjugates, i.e., N-2-hydroxypropyl methacrylamide and polycaprolactone (HP-PCL), n-butanol-polycaprolactone-N-2-hydroxypropyl methacrylamide (nBu-PCL-HP), and isoamyl alcohol-polycaprolactone-N-2-hydroxypropyl methacrylamide (ISAL-PCL-HP), were synthesized through this simple synthetic strategy following the monomer conjugation approach along with exhaustive spectroscopic and rheological characterization. The conjugates HP-PCL, nBu-PCL-HP, and ISAL-PCL-HP were characterized by Fourier transform infrared (FT-IR) and NMR (¹³C and ¹H) spectroscopies. The size and ζ potential of conjugates were determined through the dynamic light scattering (DLS) method. The nBu-PCL-HP conjugate displayed a hexagonal-like shape, as evidenced by scanning electron microscopy (SEM) with an obtained size of 237.9 ± 0.21 nm. X-ray diffraction (XRD) analysis proved the crystalline nature of nBu-PCL-HP conjugates. The results of smartly synthesized conjugates intrigued us to study their flow properties in detail. Rheological evaluation resulted in their non-Newtonian type of flow with the best-fit behavior for all of the conjugates followed as per the Herschel-Bulkley and power-law models applied herein. Conclusively, the synthesized HPMA and PCL conjugates may have applications in the preparation of blends, fibers, etc. in the future. The study portrayed that the explored synthetic scheme using monomers and initiators could be a suitable approach for the synthesis of HPMA and PCL conjugates.

Limonene-in-water Pickering emulsion and on-demand separation using thermo-responsive biodegradable nanoparticles

In the last few decades, Pickering emulsions have regained attention due to the possibility of forming stable oil-in-water emulsions with interesting interfacial properties. As an example, the more and more stringent regulations on the products for home and personal care are pushing the market towards the use of biodegradable materials in order to reduce their environmental impact. In this scenario, an appealing opportunity is offered by the use of biodegradable polymeric nanoparticles (NPs) for the stabilization of fragrance oils in water. In this work, modular biodegradable NPs have been synthesized through a combination of ring opening polymerization and reversible addition-fragmentation chain transfer emulsion polymerization and used to produce limonene-in-water Pickering emulsions. This strategy allowed controlling independently the NP size, polymer molecular weight, and hydrophobicity acting on the microstructure of the constituting copolymers. Stable limonene-in-water Pickering emulsions could be obtained, with the size of the oil phase and the wetting by limonene that can be strictly controlled by tuning the NP physico-chemical properties. Finally, the adoption of thermo-responsive polymer chains within the shell of the Pickering emulsifiers enabled the on-demand destabilization of the emulsions and hence the selective dispensing of limonene by simply increasing the temperature.

Influence of the Polymer Microstructure over the Phase Separation of Thermo-Responsive Nanoparticles

Thermo-responsive nanoparticles (NPs), i.e., colloids with a sharp and often reversible phase separation in response to thermal stimuli, are coming to the forefront due to their dynamic behavior, useful in applications ranging from biomedicine to advanced separations and smart optics. What is guiding the macroscopic behavior of these systems above their critical temperature is mainly the microstructure of the polymer chains of which these NPs are comprised. Therefore, a comprehensive understanding of the influence of the polymer properties over the thermal response is highly required to reproducibly target a specific behavior. In this study, we synthesized thermo-responsive NPs with different size, polymeric microstructure and hydrophilic-lipophilic balance (HLB) and investigated the role of these properties over their phase separation. We first synthesized four different thermo-responsive oligomers via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization of poly(ethylene glycol)methyl ether methacrylate. Then, exploiting the RAFT living character, we chain-extended these oligomers with butyl methacrylate obtaining a library of NPs. Finally, we investigated the NP thermo-responsive behavior, their physical state above the cloud point (Tcp) as well as their reversibility once the stimulus is removed. We concluded that the solid content plays a minor role compared to the relative length of the two blocks forming the polymer chains. In particular, the longer the stabilizer, the more favored the formation of a gel. At the same time, the reversibility is mainly achieved at high HLB, independently from the absolute lengths of the block copolymers.

Sequential post-polymerization modification of a pentafluorophenyl ester-containing homopolymer: a convenient route to effective pH-responsive nanocarriers for anticancer drugs

Recently, pH-responsive polymeric micelles have gained significant attention as effective carriers for anti-cancer drug delivery. Herein, pH-responsive polymeric micelles were constructed by a simple post-polymerization modification of a single homopolymer, poly(pentafluorophenyl acrylate) (PPFPA). The PPFPA was first subjected to modification with 1-amino-2-propanol yielding the amphiphilic copolymer of poly(pentafluorophenyl acrylate)-ran-poly(N-(2-hydroxypropyl acrylamide)). A series of amphiphilic random copolymers of different compositions could self-assemble into spherical micelles with a unimodal size distribution in aqueous solution. Then, 1-(3-aminopropyl)imidazole (API), a reagent to introduce charge conversional entities, was reacted with the remaining PPFPA segment in the micellar core resulting in API-modified micelles which can encapsulate doxorubicin (DOX), a hydrophobic anti-cancer drug. As monitored by dynamic light scattering, the API-modified micelles underwent disintegration upon pH switching from 7.4 to 5.0, presumably due to imidazolyl group protonation. This pH-responsiveness of the API-modified micelles was responsible for the faster and greater in vitro DOX release in an acidic environment than neutral pH. Cellular uptake studies revealed that the developed carriers were internalized into MDA-MB-231 cells within 30 min via endocytosis and exhibited cytotoxicity in a dose-dependent manner.

A Graphene-Based Supramolecular Nanoreactor for the Fast Synthesis of Imines in Water

The confinement of organic synthesis within waterborne nanoreactors is regarded with increasing attention to improve its yield and reduce the environmental impact. However, many catalysts, such as graphene, are barely dispersible in aqueous media and many chemical reactions cannot be performed in the presence of water due to thermodynamic limitations. Therefore, there is an urgent need to develop novel strategies to carry out these processes in more sustainable conditions. To pursue this goal, in this work, a waterborne supramolecular nanoreactor is developed. The system comprises a polymeric micelle obtained from the self-assembly of pyrrole-based amphiphilic block copolymers. The active catalytic component is represented by few graphene layers, functionalized with pyrrole to enhance their interaction with the micelle core and hence their nanoencapsulation. Using this nanoreactor, it is possible to synthesize imines starting from primary amines and aldehydes or ketones with high yield and in short time (Y = 90% after 5 min) at room temperature. Moreover, an efficient strategy to recycle the reactor is proposed, thus increasing the potential of this technology.

Concentration of Polymer Nanoparticles Through Dialysis: Efficacy and Comparison With Lyophilization for PEGylated and Zwitterionic Systems

Biodegradable polymeric nanoparticles (NPs) are attracting increasing attention as carriers for drug delivery. However, one of the main factors limiting their transition to the market is their premature degradation and release of the payload during the storage. Therefore, for increasing the formulation shelf-life, the removal of water is of paramount importance. In this work, we synthesized both polyethylene glycol (PEG)-stabilized and zwitterionic NPs via Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerization. We demonstrated that lyophilization leads the PEGylated NPs to irreversible aggregation, while the stability of the zwitterionic NPs was preserved only using a cryoprotectant. Therefore, we developed an alternative method for the NP concentration, based on the dialysis against a concentrated PEG solution. This method was optimized in terms of concentration factor (Fc), the ratio between the final and initial NP concentration, by acting on the PEG concentration in the dialysis medium, on its volume and on the initial NP concentration. With this approach, Fc up to 40 can be achieved in less than 10 h, preserving the possibility of redispersing the NPs to their original particle size distribution. Therefore, the dialysis proposed herein is a valuable alternative to lyophilization for the concentration of polymer NPs preserving their stability.

HPMA-based polymeric conjugates in anticancer therapeutics

Polymer therapeutics has gained prominence due to an attractive structural polymer chemistry and its applications in diseases therapy. In this review, we discussed the development and capabilities of N-(2-hydroxypropyl) methacrylamide (HPMA) and HPMA-drug conjugates in cancer therapy. The design, architecture, and structural properties of HPMA make it a versatile system for the synthesis of polymeric conjugations for biomedical applications. Research suggests that HPMA could be a possible alternative for polymers such polyethylene glycol (PEG) in biomedical applications. Although numerous clinical trials of HPMA-drug conjugates are ongoing, yet no product has been successfully brought to the market. Thus, further research is required to develop HPMA-drug conjugates as successful cancer therapeutics.

Surfactant-free and rinsing-resistant biodegradable nanoparticles with high adsorption on natural fibers for the long-lasting release of fragrances

Synthetic polymers are attracting growing attention as additives for laundry and personal care products. In particular, the high volatility of many common fragrances requires the development of polymeric particles for their encapsulation and controlled release. Unfortunately, the vast majority of these carriers is made from polymers that are not biodegradable. This poses severe concerns about the accumulation of nano- and microplastics. Hence, such particles are expected to be banned from the market in the coming years. Therefore, biodegradable particles enabling a long-lasting release of the fragrances are urgently needed. In this work, we produced biodegradable nanoparticles (NPs) that are structurally composed of lactones, i.e. well known perfumes that occur naturally and that are already considered safe by regulatory agencies. We polymerized these lactones via ring opening polymerization (ROP) using an ionizable tertiary amine as initiator to produce in a single step amphiphilic oligoesters able to directly self-assemble into NPs once nanoprecipitated in water. In this way, we can produce biodegradable NPs with a perfume loading up to 85 % w/w without the need for additional surfactants. Subsequently we show that the ionizable group is able to confer a positive charge to our nanoparticles and, in turn, a high adsorption capacity on natural fibers (i.e. hairs and cotton fabric). Finally, we demonstrate the nanoparticle resistance to rinsing and their ability to confer a long-lasting fragrance perception to treated hair swatches for at least 3 weeks.

pH-responsive polymeric nanoparticles with tunable sizes for targeted drug delivery

Biodegradable nanoparticles (NPs) have shown great promise as intracellular imaging probes, nanocarriers and drug delivery vehicles. In this study, we designed and prepared amphiphilic cellulose derivatives via Schiff base reactions between 2,3-dialdehyde cellulose (DAC) and amino compounds. Polymeric NPs were facilely fabricated via the self-assembly of the as-synthesized amphiphilic macromolecules. The size distribution of the obtained NPs can be tuned by changing the amount and length of the grafted hydrophobic side-chains. Anticancer drugs (DOX) were encapsulated in the NPs and the drug-loaded NPs based on cellulose derivatives were stable in neutral and alkaline environments for at least a month. They rapidly decomposed with the efficient release of the drug in acidic tumor microenvironments. These drug-loaded NPs have the potential for application in cancer treatment.

Applications of RAFT polymerization for chemical and enzymatic stabilization of l-asparaginase conjugates with well-defined poly(HPMA)

HPMA RAFT polymerization and activation with variable linker chemistry for stabilization of l-asparaginase against pH, temperature, freeze–thaw and proteolytic stresses.

Polymer nanoparticles for the intravenous delivery of anticancer drugs: the checkpoints on the road from the synthesis to clinical translation

In this review article we discuss some of the key aspects concerning the development of a polymer-based nanoparticle formulation for intravenous drug delivery. Since numerous preparations fail before and during clinical trials, our aim is to emphasize the main issues that a nanocarrier has to face once injected into the body. These include biocompatibility and toxicity, drug loading and release, nanoparticle storage and stability, biodistribution, selectivity towards the target organs or tissues, internalization in cells and biodegradability. They represent the main checkpoints to define a polymer-based formulation as safe and effective. Indeed, this review is intended to provide guidelines to be followed in the early development of a new nanotherapeutic to hopefully increase the success rate of polymer-based formulations entering clinical trials. The corresponding requirements and characteristics are discussed in the context of some relevant case studies taken from the literature and mainly related to the delivery of lipophilic anticancer therapeutics.

In Situ Spectroscopic Studies of Highly Transparent Nanoparticle Dispersions Enable Assessment of Trithiocarbonate Chain-End Fidelity during RAFT Dispersion Polymerization in Nonpolar Media

We report the synthesis of highly transparent poly(stearyl methacrylate)-poly(2,2,2-trifluoroethyl methacrylate) (PSMA-PTFEMA) diblock copolymer nanoparticles via polymerization-induced self-assembly (PISA) in nonpolar media at 70 °C. This was achieved by chain-extending a PSMA precursor block via reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of TFEMA in n-tetradecane. This n-alkane has the same refractive index as the PTFEMA core-forming block at 70 °C, which ensures high light transmittance when targeting 33 nm spherical nanoparticles. Such isorefractivity enables visible absorption spectra to be recorded with minimal light scattering even at 30% w/w solids. However, in situ monitoring of the trithiocarbonate RAFT end-groups during PISA requires selection of a weak n → π* band at 446 nm. Conversion of TFEMA into PTFEMA causes a contraction in the reaction solution volume, leading to an initial increase in absorbance that enables the kinetics of polymerization to be monitored via dilatometry. At ∼98% TFEMA conversion, this 446 nm band remains constant for 2 h at 70 °C, indicating surprisingly high RAFT chain-end fidelity (and hence pseudoliving character) under monomer-starved conditions. In situ 19F NMR spectroscopy studies provide evidence for (i) the onset of micellar nucleation, (ii) solvation of the nanoparticle cores by TFEMA monomer, and (iii) surface plasticization of the nanoparticle cores by n-tetradecane at 70 °C. Finally, the kinetics of RAFT chain-end removal can be conveniently monitored by in situ visible absorption spectroscopy: addition of excess initiator at 70 °C causes complete discoloration of the dispersion, with small-angle X-ray scattering studies confirming no change in nanoparticle morphology under these conditions.

Zwitterionic Polyester-Based Nanoparticles with Tunable Size, Polymer Molecular Weight, and Degradation Time

Biodegradable polymer nanoparticles are an important class of materials used in several applications for their unique characteristics. In particular, the ones stabilized by zwitterionic materials are gaining increased interest in medicine as alternative to the more common ones based on poly(ethylene glycol) thanks to their superior stability and ability to avoid both the accelerated blood clearance and allergic reactions. In this work, a novel class of zwitterionic based NPs has been produced, and a method to independently control the nanoparticle size, degradation time, and polymer molecular weight has been developed and demonstrated. This has been possible by the synthesis and the fine-tuning of zwitterionic amphiphilic block copolymers obtained via the combination of ring-opening polymerization and reversible addition-fragmentation chain transfer polymerization. The final results showed that when two block copolymers contain the same number of caprolactone units, the one with longer oligoester lateral chains degrades faster. This phenomenon is in sharp contrast with the one seen so far for the common linear polyester systems where longer chains result in longer degradation times, and it can be used to better tailor the degradation behavior of the nanoparticles.

Strategies to combine ROP with ATRP or RAFT polymerization for the synthesis of biodegradable polymeric nanoparticles for biomedical applications

The available strategies to combine CRPs and ROP in the synthesis of highly engineered polymer nanoparticles are here critically discussed.