Low temperature CO oxidation catalysed by flower-like Ni–Co–O: how physicochemical properties influence catalytic performance

Proactive Effect of Algae-Based Graphene Support on the Oxygen Evolution Reaction Electrocatalytic Activity of NiFe

The preparation of graphene materials from biomass resources is still a challenge, even more so if they are going to be employed as supports for electrocatalysts for water splitting. Herein, we describe the preparation and characterization of graphene oxides (GOs) from solid macroalgae waste obtained after processing an agar-agar residue. The structural and morphological characterization of the obtained GO confirm the presence of a lamellar material that is composed of few layers with an increased number of heteroatoms (including nitrogen) if compared with those observed in a GO obtained from graphite (reference). Three-dimensional electrodes were prepared from these GOs by depositing them onto a fibrous carbon paper, followed by electrodeposition of the catalyst, NiFe. The electrocatalytic performance of these hybrid systems for the oxygen evolution reaction (OER) showed a proactive effect of both graphene materials toward catalysis. Moreover, the electrode prepared from the algae-based graphene showed the highest electrocatalytic activity. This fact could be explained by the different structure of the algae-based graphene which, due to differences in the nucleation growth patterns and electroactive sites developed during the electrodeposition process, produced more reactive NiFe species (higher oxidation state).

Unraveling and leveraging in situ surface amorphization for enhanced hydrogen evolution reaction in alkaline media

Surface amorphization provides electrocatalysts with more active sites and flexibility. However, there is still a lack of experimental observations and mechanistic explanations for the in situ amorphization process and its crucial role. Herein, we propose the concept that by in situ reconstructed amorphous surface, metal phosphorus trichalcogenides could intrinsically offer better catalytic performance for the alkaline hydrogen production. Trace Ru (0.81 wt.%) is doped into NiPS3 nanosheets for alkaline hydrogen production. Using in situ electrochemical transmission electron microscopy technique, we confirmed the amorphization process occurred on the edges of NiPS3 is critical for achieving superior activity. Comprehensive characterizations and theoretical calculations reveal Ru primarily stabilized at edges of NiPS3 through in situ formed amorphous layer containing bridging S22- species, which can effectively reduce the reaction energy barrier. This work emphasizes the critical role of in situ formed active layer and suggests its potential for optimizing catalytic activities of electrocatalysts.

NiFe Alloy Integrated with Amorphous/Crystalline NiFe Oxide as an Electrocatalyst for Alkaline Hydrogen and Oxygen Evolution Reactions

The rational design of efficient and low-cost electrocatalysts based on earth-abundant materials is imperative for large-scale production of hydrogen by water electrolysis. Here we present a strategy to prepare highly active catalyst materials through modifying the crystallinity of the surface/interface of strongly coupled transition metal-metal oxides. We have thermally activated the catalysts to construct amorphous/crystalline Ni-Fe oxide interfaced with a conductive Ni-Fe alloy and systematically investigated their electrocatalytic performance toward the hydrogen evolution and oxygen evolution reactions (HER and OER) in alkaline solution. It was found that the Ni-Fe/oxide material with a crystalline surface oxide phase showed remarkably superior HER activity in comparison with its amorphous or poorly crystalline counterpart. In contrast, interestingly, the amorphous/poorly crystalline oxide significantly facilitated the OER activity in comparison with the more crystalline counterpart. On one hand, the higher HER activity can be ascribed to a favorable platform for water dissociation and H-H bond formation, enabled by the unique crystalline metal/oxide structure. On the other hand, the enhanced OER catalysis on the amorphous Ni-Fe oxide surfaces can be attributed to the facile activation to form the active oxyhydroxides under OER conditions. Both are explained based on density functional theory calculations. These results thus shed light onto the role of crystallinity in the HER and OER catalysis on heterostructured Ni-Fe/oxide catalysts and provide guidance for the design of new catalysts for efficient water electrolysis.

Development of Innovative Structured Catalysts for the Catalytic Decomposition of N2O at Low Temperatures

Nitrous oxide (N2O), produced from several human activities, is considered a greenhouse gas with significant environmental impacts. The most promising abatement technology consists of the catalytic decomposition of N2O into nitrogen and oxygen. Many recently published papers dealing with N2O catalytic decomposition over Ni-substituted Co3O4 are related to the treatment of N2O concentrations less than 2 vol% in the feed stream. The present work is focused on developing catalysts active in the presence of a gaseous stream richer in N2O, up to 20 vol%, both as powder and in structured configurations suitable for industrial application. With this aim, different nickel-cobalt mixed oxides (NixCo1−xCo2O4) were prepared, characterized, and tested. Subsequently, since alumina-based slurries assure successful deposition of the catalytic species on the structured carrier, a screening was performed on three nickel-cobalt-alumina mixed oxides. As the latter samples turned out to be excellent catalysts for the N2O decomposition reaction, the final catalytic formulation was transferred to a silicon carbide monolith. The structured catalyst led to the following very promising results: total N2O conversion and selectivity towards N2 and O2 were reached at 510 °C by feeding 20 vol% of N2O. It represents an important achievement in the view of developing a more concretely applicable catalytic system for industrial processes.

Low temperature catalytic conversion of carbon monoxide by the application of novel perovskite catalysts

Automobile exhaust contributes the largest sources of carbon monoxide (CO) into the environment. To control this CO pollution, the catalytic converters have been discovered. The catalytic converters have been invented for regulating the CO discharge. There are many types of catalysts have been investigated for CO emission control purposes. Inorganic perovskite-type oxides are fascinating nanomaterials for wide applications in catalysis, fuel cells, and electrochemical sensing. Perovskites prepared in the nanoscale have recently received more attention due to their catalytic nature when used as electrode modifiers. Perovskite catalysts show great potential for CO oxidation catalyst in a catalytic converter for their low cost, high thermal stability and tailoring flexibility. It is active for CO oxidation at a lower temperature. The catalytic activity of these oxides is higher than that of many transition metals compounds and even some precious metal oxides. They represents attractive physical and chemical characteristics such as electronic conductivity, electrically active structure, the oxide ions mobility through the crystal lattice, variations on the content of the oxygen, thermal and chemical stability, and supermagnetic, photocatalytic, thermoelectric and dielectric properties. The surface sites and lattice oxygen species present in perovskite catalysts play an important role in chemical transformations. The partial replacement of cations A and B by different elements, which changes the atomic distance, causes unit cell disturbances, stabilizes various oxidation states or added cationic or anionic vacancies inside the lattice. The novel things disturb the solid reactivity by varying the reaction mechanism on the catalyst surface. Thus, the better cations replacement may represent more activity. There are lots of papers available to CO oxidation over perovskite catalysts but no review paper available in the literature that is represented to CO oxidation.

Quality or Quantity? How Structural Parameters Affect Catalytic Activity of Iron Oxides for CO Oxidation

The replacement of noble metal catalysts by abundant iron as an active compound in CO oxidation is of ecologic and economic interest. However, improvement of their catalytic performance to the same level as state-of-the-art noble metal catalysts requires an in depth understanding of their working principle on an atomic level. As a contribution to this aim, a series of iron oxide catalysts with varying Fe loadings from 1 to 20 wt% immobilized on a γ-Al2O3 support is presented here, and a multidimensional structure–activity correlation is established. The CO oxidation activity is correlated to structural details obtained by various spectroscopic, diffraction, and microscopic methods, such as PXRD, PDF analysis, DRUVS, Mössbauer spectroscopy, STEM-EDX, and XAS. Low Fe loadings lead to less agglomerated but high percentual amounts of isolated, tetrahedrally coordinated iron oxide species, while the absolute amount of isolated species reaches its maximum at high Fe loadings. Consequently, the highest CO oxidation activity in terms of turnover frequencies can be correlated to small, finely dispersed iron oxide species with a large amount of tetrahedrally oxygen coordinated iron sites, while the overall amount of isolated iron oxide species correlates with a lower light-off temperature.

Enhancing Hydrogen Adsorption Capacity of Metal Organic Frameworks M(BDC)TED0.5 through Constructing a Bimetallic Structure

Metal organic frameworks (MOFs) have promising application prospects in the field of hydrogen storage. However, the successful application of MOFs in the field is still limited by their hydrogen storage capacity. Herein, a series of M _x M_1-x (BDC)TED_0.5 (M = Zn, Cu, Co, or Ni) with a bimetallic structure was constructed by introducing two metal ions in the synthesis process. The results of X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma showed that the bimetallic structure with different content ratios can be stably constructed by a hydrothermal method. Among them, the Cu-based bimetal MOFs Cu_0.625Ni_0.375(BDC)TED_0.5 exhibited the best hydrogen storage capacity of 2.04 wt% at 77 K and 1 bar, which was 22% higher than that of monometallic Ni(BDC)TED_0.5. The enhanced hydrogen storage capacity can be attributed to the improved specific surface area and micropore volume of bimetal MOFs by introducing an appropriate amount of bimetallic atoms.

The Effect of Water on the 2-Propanol Oxidation Activity of Co-Substituted LaFe1- Cox O3 Perovskites

Perovskites are interesting oxidation catalysts due to their chemical flexibility enabling the tuning of several properties. In this work, we synthesized LaFe_1−xCo_xO₃ catalysts by co‐precipitation and thermal decomposition, characterized them thoroughly and studied their 2‐propanol oxidation activity under dry and wet conditions to bridge the knowledge gap between gas and liquid phase reactions. Transient tests showed a highly active, unstable low‐temperature (LT) reaction channel in conversion profiles and a stable, less‐active high‐temperature (HT) channel. Cobalt incorporation had a positive effect on the activity. The effect of water was negative on the LT channel, whereas the HT channel activity was boosted for x>0.15. The boost may originate from a slower deactivation rate of the Co³⁺ sites under wet conditions and a higher amount of hydroxide species on the surface comparing wet to dry feeds. Water addition resulted in a slower deactivation for Co‐rich catalysts and higher activity in the HT channel state.

Air Stable Nickel-Decorated Black Phosphorus and Its Room-Temperature Chemiresistive Gas Sensor Capabilities

In the rapidly emerging field of layered two-dimensional functional materials, black phosphorus, the P-counterpart of graphene, is a potential candidate for various applications, e.g., nanoscale optoelectronics, rechargeable ion batteries, electrocatalysts, thermoelectrics, solar cells, and sensors. Black phosphorus has shown superior chemical sensing performance; in particular, it is selective for the detection of NO2, an environmental toxic gas, for which black phosphorus has highlighted high sensitivity at a ppb level. In this work, by applying a multiscale characterization approach, we demonstrated a stability and functionality improvement of nickel-decorated black phosphorus films for gas sensing prepared by a simple, reproducible, and affordable deposition technique. Furthermore, we studied the electrical behavior of these films once implemented as functional layers in gas sensors by exposing them to different gaseous compounds and under different relative humidity conditions. Finally, the influence on sensing performance of nickel nanoparticle dimensions and concentration correlated to the decoration technique and film thickness was investigated.

The Effect of Co Incorporation on the CO Oxidation Activity of LaFe1−xCoxO3 Perovskites

Perovskite oxides are versatile materials due to their wide variety of compositions offering promising catalytic properties, especially in oxidation reactions. In the presented study, LaFe1−xCoxO3 perovskites were synthesized by hydroxycarbonate precursor co-precipitation and thermal decomposition thereof. Precursor and calcined materials were studied by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TG), and X-ray powder diffraction (XRD). The calcined catalysts were in addition studied by transmission electron microscopy (TEM) and N2 physisorption. The obtained perovskites were applied as catalysts in transient CO oxidation, and in operando studies of CO oxidation in diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). A pronounced increase in activity was already observed by incorporating 5% cobalt into the structure, which continued, though not linearly, at higher loadings. This could be most likely due to the enhanced redox properties as inferred by H2-temperature programmed reduction (H2-TPR). Catalysts with higher Co contents showing higher activities suffered less from surface deactivation related to carbonate poisoning. Despite the similarity in the crystalline structures upon Co incorporation, we observed a different promotion or suppression of various carbonate-related bands, which could indicate different surface properties of the catalysts, subsequently resulting in the observed non-linear CO oxidation activity trend at higher Co contents.

Plasma-assisted defect engineering of N-doped NiCo2O4 for efficient oxygen reduction

Defect control is a promising way to enhance the electrocatalysis performance of metal oxides. Oxygen vacancy enriched NiCo₂O₄ was successfully prepared using cold plasma. Oxygen as a plasma-forming gas introduces oxygen vacancies via electron etching. The concentration of oxygen vacancies can be controlled by different plasma-forming gas. CoO, which formed on the plasma samples, is beneficial for quick charge transfer and electrocatalytic performance. A high amount of nitrogen atoms of up to 10.1% was doped on NiCo₂O₄ because of the enriched oxygen vacancies and improved the stability of the oxygen defects and the conductivity of the catalyst. Electrocatalytic studies showed that the plasma-induced N-doped NiCo₂O₄ shows enhanced electrocatalytic performance for the oxygen reduction reaction (ORR). It shows a typical four-electron process that considerably improves the current density and onset potential. The HO₂^- % was as low as 0.59% and current density was 4.9 mA cm^-2 at 0.2 V (Vs. RHE) on the plasma-treated NiCo₂O₄. Calculations based on density functional theory reveal the mechanism for the promotion of the catalytic ORR activity via plasma treatment. This increases the electron density near the Fermi level, reducing the work function, and changing the position of the d-band center.

Facile Access to an Active γ-NiOOH Electrocatalyst for Durable Water Oxidation Derived From an Intermetallic Nickel Germanide Precursor

Identifying novel classes of precatalysts for the oxygen evolution reaction (OER by water oxidation) with enhanced catalytic activity and stability is a key strategy to enable chemical energy conversion. The vast chemical space of intermetallic phases offers plenty of opportunities to discover OER electrocatalysts with improved performance. Herein we report intermetallic nickel germanide (NiGe) acting as a superior activity and durable Ni-based electro(pre)catalyst for OER. It is produced from a molecular bis(germylene)-Ni precursor. The ultra-small NiGe nanocrystals deposited on both nickel foam and fluorinated tin oxide (FTO) electrodes showed lower overpotentials and a durability of over three weeks (505 h) in comparison to the state-of-the-art Ni-, Co-, Fe-, and benchmark NiFe-based electrocatalysts under identical alkaline OER conditions. In contrast to other Ni-based intermetallic precatalysts under alkaline OER conditions, an unexpected electroconversion of NiGe into γ-NiIII OOH with intercalated OH- /CO3 2- transpired that served as a highly active structure as shown by various ex situ methods and quasi in situ Raman spectroscopy.

MOF-74-M (M = Mn, Co, Ni, Zn, MnCo, MnNi, and MnZn) for Low-Temperature NH3-SCR and In Situ DRIFTS Study Reaction Mechanism

Monometallic and bimetallic MOF-74-M (M = Mn, Co, Ni, Zn, MnCo, MnNi, and MnZn) catalysts were prepared by the solvothermal method for NH₃-SCR. XRD, BET, SEM, and EDS-mapping tests indicate the successful synthesis of the MOF-74-M catalyst with uniform distribution of metal elements and large specific surface area, and the morphology is almost hexagonal. Adding Mn element to a single-metal catalyst can enhance activity, which is mainly because of the existence of various valence states of Mn so that it has excellent redox properties; the catalytic activity of water and sulfur resistance tests showed that the catalytic activity of MOF-74-M increases after adding a proper amount of SO₂, mainly because of the increase in acidic sites. In situ DRIFTS results indicate that the low-temperature range of MOF-74-MnCo and MOF-74-Mn is dominated by the E-R mechanism and the high-temperature range is dominated by the L-H mechanism. The entire temperature range of MOF-74-Zn is dominated by the L-H mechanism.

Prepared self-growing supported nickel catalyst by recovering Ni (Ⅱ) from metal wastewater using geopolymer microspheres

Here, new and effective microsphere adsorbents were synthesized by NaOH activating slag based geopolymer (Na-SGS). These microsphere adsorbents upset the adsorption equilibrium with the maximum Ni²⁺ adsorption capacity of 414.38 mg/g which is much larger than that of other geopolymer materials. After Ni²⁺ adsorption from simulated nickel electroplating wastewater, more active positions for the adsorption Ni²⁺ ions on Na-SGS were provided as shifts from the average pore diameter of 22.00-7.44 nm, the pore volume of 0.06 to 0.25 cm³/g, the Brunauer-Emmett-Teller (BET) surface area of 10.46-125.35 m²/g and the apparent change of new morphology. Moreover, the adsorbed Ni²⁺ species were distributed uniformly on Na-SGS. Thermodynamic performance reflected an exothermic, spontaneous and molecular disorder adsorption process, which can be easily controlled by the pH, dosage, initial concentration, contact time and temperature. Through the controllable adsorption, Na-SGS after Ni²⁺ adsorption (Na-SGS-Ni) was recycled and then reduced to be directly supported nickel catalysts (red-Na-SGS-Ni), which showed superior catalytic activity for CO₂ methanation. Although the highest percent of CO₂ conversation (XCO₂ =99.54%) and methane selectivity (SCH₄ =99.5%) are both at 300 °C, red-Na-SGS-Ni performed good XCO₂ (99.48%) and SCH₄ (98.2%) at low temperatures (100 °C).

Solvent Effect on the Solvothermal Synthesis of Mesoporous NiO Catalysts for Activation of Peroxymonosulfate to Degrade Organic Dyes

In this work, we successfully prepared three different mesoporous NiO nanostructures with preferential (111) planes using three different solvents-water, a water-ethanol mixture, and a water-ethylene glycol mixture. The NiO nanosheets prepared from the water-ethylene glycol mixture and denoted as NiO-EG showed a nanosheet morphology thinner than 10 nm, whereas the water-ethanol and water samples were 30-40 nm and above 100 nm thick, respectively. The NiO-EG catalyst was found to exhibit a high catalyzing ability to activate peroxymonosulfate (PMS) for decoloring dyes, by which 94.4% of acid orange 7 (AO7) was degraded under the following reaction conditions: AO7 = 50 mg/L, catalyst = 0.2 g/L, PMS = 0.8 g/L, pH = 7, and 30 min reaction time. The dye degradation rate was investigated as a function of the catalyst dosage, pH, and dye concentration. According to quenching experiments, it was found that SO4 •-, HO•, and O2 •- were the dominant radicals for AO7 degradation, and oxygen vacancies played a significant role in the generation of radicals. High surface area, thin flaky structure, rich oxygen vacancies, fast charge transport, and low diffusion impedance all enhanced the catalytic activity of NiO-EG, which exhibited the highest degradation ability due to its abundant accessible active sites for both adsorption and catalysis.

Leaf-like Co-ZIF-L derivatives embedded on Co2AlO4/Ni foam from hydrotalcites as monolithic catalysts for toluene abatement

Herein, a series of distinctively monolithic catalysts were first synthesized by decorating leaf-like Co-ZIF-L derivatives on Co₂AlO₄ coral-like microspheres from CoAl layered double hydroxides (LDHs), which were coated on three-dimensional porous Ni foam. As a proof of concept application, toluene was chosen as a probe molecule to evaluate their catalytic performances over the as-synthesized catalysts. As a result, the L-12 sample derived from Co₂AlO₄@Co-Co LDHs displayed an excellent catalytic performance, cycling stability and long-term stability for toluene oxidation (T₉₉ = 272 °C, 33 °C lower than that of Co₂AlO₄ sample), where leaf-like Co-ZIF-L served as a sacrificial template to synthesize Co-Co LDHs. The improved catalytic performance was attributed to its distinctive structure, in which leaf-like Co-ZIF-L derivatives on Co₂AlO₄ resulted in its higher specific surface area, lower-temperature reducibility, rich surface oxygen vacancy and high valence Co³⁺ species. This work thus demonstrates a feasible strategy for the design and fabrication of hybrid LDHs/ZIFs-derived composite architectures, which is expected to construct other novel monolithic catalysts with hierarchical structures for other potential applications.

Mn Modified Ni/Bsentonite for CO2 Methanation

To enhance the low-temperature catalytic activity and stability of Ni/bentonite catalyst, Ni-Mn/bentonite catalyst was prepared by introducing Mn into Ni/bentonite catalyst and was used for CO2 methanation. The results indicated that the addition of Mn enhanced the interaction between the NiO and the bentonite carrier, increased the dispersion of the active component Ni and decreased the grain size of the active component Ni, increased the specific surface area and pore volume of the Ni/bentonite catalyst, and decreased the average pore size, which suppressed the aggregation of Ni particles grown during the CO2 methanation process. At the same time, the Mn addition increased the amount of oxygen vacancies on the Ni/bentonite catalyst surface, which promoted the activation of CO2 in the methanation reaction, increasing the low-temperature activity and stability of the Ni/bentonite catalyst. Under the reaction condition of atmospheric pressure, 270 °C, V(H2):V(CO2) = 4, and feed gas space velocity of 3600 mL·gcat−1·h−1, the CO2 conversion on the Ni-Mn/bentonite catalyst with 2wt% Mn was 85.2%, and the selectivity of CH4 was 99.8%. On the other hand, when Mn was not added, the CO2 conversion reached 84.7% and the reaction temperature only raised to 300 °C. During a 150-h stability test, the CO2 conversion of Ni-2wt%Mn/bentonite catalyst decreased by 2.2%, while the CO2 conversion of the Ni/bentonite catalyst decreased by 6.4%.

The production of an efficient visible light photocatalyst for CO oxidation through the surface plasmonic effect of Ag nanoparticles on SiO2@α-Fe2O3 nanocomposites

A process for the photo deposition of noble Ag nanoparticles on a core-shell structure of SiO2@α-Fe2O3 nanocomposite spheres was performed to produce a CO photo oxidation catalyst. The structural analyses were carried out for samples produced using different Ag metal nanoparticle weight percentages on SiO2@α-Fe2O3 nanocomposite spheres by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), UV-vis spectroscopy, Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR). A computational study was also performed to confirm the existence of the synergic effect of surface plasmon resonance (SPR) for different weight percentages of Ag on the SiO2@α-Fe2O3 nanocomposites. The mechanism for CO oxidation on the catalyst was explored using diffuse reflectance infrared Fourier transform spectroscopy (DRFIT). The CO oxidation results for the Ag (2 wt%)-SiO2@α-Fe2O3 nanocomposite spheres showed 48% higher photocatalytic activity than α-Fe2O3 and SiO2@α-Fe2O3 at stable temperature.