Electrostatically driven resonance energy transfer in "cationic" biocompatible indium phosphide quantum dots

Ammonia Synthesis with Visible Light and Quantum Dots

Light-assisted synthesis of ammonia from nitrate and nitrite sources is a sustainable approach to reduce the burden of the energy-intensive Haber-Bosch process. However, poor selectivity and the need for UV-active photocatalysts are the current bottlenecks in the synthesis of ammonia from nitrate and nitrite sources. Herein, we introduce selective visible-light-driven ammonia production from nitrate and nitrite ions with indium phosphide quantum dots (InP QDs) as the photocatalyst. The presence of catalytic indium sites and microenvironment modulation through an interplay of catalyst-reactant interactions resulted in efficient and selective ammonia formation under visible light. Ammonia was produced in an attractive yield of ∼94% in both aqueous and gaseous phases within 2 h of visible-light irradiation at room temperature. A decent formation of ammonia was observed under sunlight as well, strengthening the translational prospects of InP QD photocatalysts. Mechanistic investigations ascertained a negligible role of competing hydrogen evolution in direct nitrate reduction, confirming the active participation of photoexcited charge carriers from InP QDs in the ammonia synthesis. Kinetic studies revealed the energetically challenging nitrate-to-nitrite conversion as the rate-determining step, with subsequent reactions proceeding with ∼100% conversion to yield ammonia. A series of experiments concluded that water is the proton source in the InP QD-photocatalyzed synthesis of ammonia. Our study shows the impact of the rationally designed core and surface of InP QD-based photocatalysts in developing sustainable routes to produce ammonia beyond the Haber-Bosch process.

Surfactant-mediated enhanced FRET from a quantum-dot complex for ratiometric sensing of food colorants

Herein we report that a surfactant modified quantum dot-complex (S-QDC; with λem-515 nm) nanocomposite, as a donor fluorophore, exhibits enhanced Förster resonance energy transfer (FRET) efficiency to an acceptor organic dye (λem-576 nm) in comparison to only the QDC. The proposed S-QDC (consisting of a ZnS quantum dot, zinc quinolate inorganic complex and cetyltrimethylammonium bromide (CTAB) surfactant) provides the unique and selective ratiometric visual detection of organic dyes present as food colorants in commercial chili powder, tomato ketchup and mixed fruit jam. Notably, the S-QDC shows a limit of detection (LOD) as low as 2.2 nM in the linear range of 0.17-4.89 μM for food colorants. Furthermore, the present work will bring new possibilities to unravelling the chemistry among surfactants, inorganic complexes and quantum dots to make newer optical materials with futuristic scope of utilization ranging from optical sensors to light emitting devices.

Nanoparticle Self-Assembly: From Design Principles to Complex Matter to Functional Materials

The creation of matter with varying degrees of complexities and desired functions is one of the ultimate targets of self-assembly. The ability to regulate the complex interactions between the individual components is essential in achieving this target. In this direction, the initial success of controlling the pathways and final thermodynamic states of a self-assembly process is promising. Despite the progress made in the field, there has been a growing interest in pushing the limits of self-assembly processes. The main inception of this interest is that the intended self-assembled state, with varying complexities, may not be "at equilibrium (or at global minimum)", rendering free energy minimization unsuitable to form the desired product. Thus, we believe that a thorough understanding of the design principles as well as the ability to predict the outcome of a self-assembly process is essential to form a collection of the next generation of complex matter. The present review highlights the potent role of finely tuned interparticle interactions in nanomaterials to achieve the preferred self-assembled structures with the desired properties. We believe that bringing the design and prediction to nanoparticle self-assembly processes will have a similar effect as retrosynthesis had on the logic of chemical synthesis. Along with the guiding principles, the review gives a summary of the different types of products created from nanoparticle assemblies and the functional properties emerging from them. Finally, we highlight the reasonable expectations from the field and the challenges lying ahead in the creation of complex and evolvable matter.

Blue-emitting InP quantum dots participate in an efficient resonance energy transfer process in water

Development of stable blue-emitting materials has always been a challenging task because of the necessity of high crystal quality and good optical properties. We have developed a highly efficient blue-emitter, based on environmentally friendly indium phosphide/zinc sulphide quantum dots (InP/ZnS QDs) in water, by controlling the growth kinetics of the core as well as the shell. A rational combination of less-reactive metal-halides, phosphorus, and sulphur precursors is the key for achieving the uniform growth of the InP core and ZnS shell. The InP/ZnS QDs showed long-term stable photoluminescence (PL) in the pure-blue region (∼462 nm), with an absolute PL quantum yield of ∼50% and a colour purity of ∼80% in water. Cytotoxicity studies revealed that the cells can withstand up to ∼2 micromolar concentration of pure-blue emitting InP/ZnS QDs (∼120 μg mL^-1). Multicolour imaging studies show that the PL of InP/ZnS QDs was well-retained inside the cells as well, without interfering with the fluorescence signal of commercially available biomarkers. Moreover, the ability of InP based pure-blue emitters to participate in an efficient Förster resonance energy transfer (FRET) process is demonstrated. Installing a favorable electrostatic interaction turned out to be crucial in achieving an efficient FRET process (E ∼75%) from blue-emitting InP/ZnS QDs to rhodamine B dye (Rh B) in water. The quenching dynamics fits well with the Perrin formalism and the distance-dependent quenching (DDQ) model, which confirms an electrostatically driven multi-layer assembly of Rh B acceptor molecules around the InP/ZnS QD donor. Furthermore, the process of FRET was successfully translated into the solid state, proving their suitability for device-level studies as well. In short, our study expands the spectrum of aqueous QDs based on InP towards the blue region for future biological and light harvesting studies.

All-quantum dot based Förster resonant energy transfer: key parameters for high-efficiency biosensing

While colloidal quantum dots (QDs) are commonly used as fluorescent donors within biosensors based on Förster resonant energy transfer (FRET), they are hesitantly employed as acceptors. On the sole basis of Förster theory and the well-known behaviour of organic dyes, it is often argued that the QD absorption band over the UV-visible range is too wide. Discarding these preconceptions inherited from classical fluorophores, we experimentally examine the FRET process occurring between donor and acceptor CdTe QDs and provide a mathematical description of it. We evidence that the specific features of QDs unexpectedly lead to the enhancement of acceptors' emission (up to +400%), and are thus suitable for the design of highly efficient all-QD based FRET sensors. Our model enables us to identify the critical parameters maximizing the contrast between positive and negative biosensing readouts: the concentrations of donors and acceptors, their spectral overlap, the densities of their excitonic states, their dissipative coupling with the medium and the statistics of QD-QD chemical pairing emerge as subtle and determinant parameters. We relate them quantitatively to the measured QD-QD FRET efficiency and discuss how they must be optimized for biosensing applications.

Chirality-Dependent Dynamic Evolution of the Protein Corona on the Surface of Quantum Dots

Elucidating the biological behavior of engineered nanoparticles, for example, the protein corona, is important for the development of safe and efficient nanomedicine, but our current understanding is still limited due to its highly dynamic nature and lack of adequate analytical tools. In the present work, we demonstrate the establishment of a fluorescence resonance energy transfer (FRET)-based platform for monitoring the dynamic evolution behavior of the protein corona in complex biological media. With human serum albumin and lysozyme as the model serum proteins, the protein exchange process of the preformed corona on the surface of chiral quantum dots (QDs) upon feeding either individual protein or human serum was monitored in situ by FRET. Important parameters characterizing the evolution process of protein corona could be obtained upon quantitative analysis of FRET data. Further combining real-time FRET monitoring with gel electrophoresis experiments revealed that the nature of the protein initially adsorbed on the surface of QDs significantly affects the subsequent dynamic exchange behavior of the protein corona. Furthermore, our results also revealed that only a limited proportion of proteins are involved in the protein exchange, and the exchange process exhibits a significant dependence on the surface chirality of QDs. This work demonstrates the feasibility of FRET as a powerful tool to exploit the dynamic evolution process of the protein corona, which can provide theoretical guidance for further design of advanced nanomaterials for biomedical applications.

Optoelectronic Neural Interfaces Based on Quantum Dots

Optoelectronic modulation of neural activity is an emerging field for the investigation of neural circuits and the development of neural therapeutics. Among a wide variety of nanomaterials, colloidal quantum dots provide unique optoelectronic features for neural interfaces such as sensitive tuning of electron and hole energy levels via the quantum confinement effect, controlling the carrier localization via band alignment, and engineering the surface by shell growth and ligand engineering. Even though colloidal quantum dots have been frontier nanomaterials for solar energy harvesting and lighting, their application to optoelectronic neural interfaces has remained below their significant potential. However, this potential has recently gained attention with the rise of bioelectronic medicine. In this review, we unravel the fundamentals of quantum-dot-based optoelectronic biointerfaces and discuss their neuromodulation mechanisms starting from the quantum dot level up to electrode-electrolyte interactions and stimulation of neurons with their physiological pathways. We conclude the review by proposing new strategies and possible perspectives toward nanodevices for the optoelectronic stimulation of neural tissue by utilizing the exceptional nanoscale properties of colloidal quantum dots.

InP-Bovine Serum Albumin Conjugates as Energy Transfer Probes

The use of indium phosphide (InP) quantum dots (QDs) as biological fluorophores is limited by the low photoluminescence quantum yield (ϕ_PL) and the lack of effective bioconjugation strategies. The former issue has been addressed by introducing a strain relaxing intermediate shell such as ZnSe, GaP etc. that significantly enhances the ϕ_PL of InP. Herein, we present an effective strategy for the conjugation of emissive InP/GaP/ZnS QDs with a commonly used globular protein, namely bovine serum albumin (BSA), which generate colloidally stable QD bioconjugates, labeled as InP-BSA and demonstrate its use as energy transfer probes. The conjugate contains one protein per QD, and the circular dichroism spectra of BSA and InP-BSA exhibit similar fractions of α-helix and β-sheet, reflective of the fact that the secondary structure of the protein is intact on binding. More importantly, the fluorescence polarization studies corroborate the fact that the bound protein can hold a variety of chromophoric acceptors. Upon selectively exciting the InP-BSA component in the presence of bound chromophores, a reduction in the emission intensity of the donor is observed with a concomitant increase in emission of the acceptor. Time-resolved investigations further confirm an efficient nonradiative energy transfer from InP-BSA to the bound acceptors.

Interactions of cationic gold nanoclusters with serum proteins and effects on their cellular responses

Cationic nanoparticles (NPs) have shown great potential in biological applications owing to their distinct features such as favorable cellular internalization and easy binding to biomolecules. However, our current knowledge of cationic NPs' biological behavior, i.e., NP-protein interactions, is still rather limited. Herein, we choose ultrasmall-sized fluorescent gold nanoclusters (AuNCs) coated by (11-mercaptoundecyl) - N, N, N - trimethylammonium bromide (MUTAB) as representative cationic NPs, and systematically study their interactions with different serum proteins at nano-bio interfaces. By monitoring the fluorescence intensity of MUTAB-AuNCs, all proteins are observed to bind with roughly micromolar affinities to AuNCs and quench their fluorescence. Transient fluorescence spectroscopy, X-ray photoelectron spectroscopy and isothermal titration calorimetry are also adopted to characterize the physicochemical properties of MUTAB-AuNCs after the protein adsorption. Concomitantly, circular dichroism spectroscopy reveals that cationic AuNCs can exert protein-dependent conformational changes of these serum proteins. Moreover, protein adsorption onto cationic AuNCs can significantly influence their cellular responses such as cytotoxicity and uptake efficiency. These results provide important knowledge towards understanding the biological behaviors of cationic nanoparticles, which will be helpful in further designing and utilizing them for safe and efficient biomedical applications.

Molecular insights and future frontiers in cell photosensitization for solar-driven CO2 conversion

The conversion of CO2 to value-added products powered with solar energy is an ideal solution to establishing a closed carbon cycle. Combining microorganisms with light-harvesting nanomaterials into photosynthetic biohybrid systems (PBSs) presents an approach to reaching this solution. Metabolic pathways precisely evolved for CO2 fixation selectively and reliably generate products. Nanomaterials harvest solar light and biocompatibly associate with microorganisms owing to similar lengths scales. Although this is a nascent field, a variety of approaches have been implemented encompassing different microorganisms and nanomaterials. To advance the field in an impactful manner, it is paramount to understand the molecular underpinnings of PBSs. In this perspective, we highlight studies inspecting charge uptake pathways and singularities in photosensitized cells. We discuss further analyses to more completely elucidate these constructs, and we focus on criteria to be met for designing photosensitizing nanomaterials. As a result, we advocate for the pairing of microorganisms with naturally occurring and highly biocompatible mineral-based semiconductor nanomaterials.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Photoactivated Indium Phosphide Quantum Dots Treat Multidrug-Resistant Bacterial Abscesses In Vivo

The increasing prevalence of drug-resistant bacterial strains is causing illness and death in an unprecedented number of people around the globe. Currently implemented small-molecule antibiotics are both increasingly less efficacious and perpetuating the evolution of resistance. Here, we propose a new treatment for drug-resistant bacterial infection in the form of indium phosphide quantum dots (InP QDs), semiconductor nanoparticles that are activated by light to produce superoxide. We show that the superoxide generated by InP QDs is able to effectively kill drug-resistant bacteria in vivo to reduce subcutaneous abscess infection in mice without being toxic to the animal. Our InP QDs are activated by near-infrared wavelengths with high transmission through skin and tissues and are composed of biocompatible materials. Body weight and organ tissue histology show that the QDs are nontoxic at a macroscale. Inflammation and oxidative stress markers in serum demonstrate that the InP QD treatment did not result in measurable effects on mouse health at concentrations that reduce drug-resistant bacterial viability in subcutaneous abscesses. The InP QD treatment decreased bacterial viability by over 3 orders of magnitude in subcutaneous abscesses formed in mice. These InP QDs thus provide a promising alternative to traditional small-molecule antibiotics, with the potential to be applied to a wide variety of infection types, including wound, respiratory, and urinary tract infections.

Probing How Various Metal Ions Interact with the Surface of QDs: Implication of the Interaction Event on the Photophysics of QDs

With an aim to understand the mechanism of interaction between quantum dots (QDs) and various metal ions, fluorescence response of less-toxic and water-soluble glutathione-capped Zn-Ag-In-S (GSH@ZAIS) QDs in the presence of different metal ions has been investigated at both ensemble and single-molecule level. Fourier transform infrared (FT-IR) spectroscopy has also been performed to obtain a molecular level understanding of the interaction event. The steady-state data reveal no significant change in QD emission for alkali and alkaline earth metal ions, while there is a decrease in fluorescence intensity for transition metal (TM) and some heavy transition metal (HTM) ions. Interestingly, a significant fluorescent enhancement (FE) (19-96%) of QDs is found for Cd²⁺ ions. Time-resolved fluorescence studies reveal that all the three decay components of QDs decrease in the presence of first-row TM ions. However, in the case of Cd²⁺, the shorter component is found to increase while the longer one decreases. The analysis of data reveals that photoinduced electron transfer is responsible for fluorescence quenching of QDs in the presence of first-row TM ions and destruction/removal of trap/defect states in the case of Cd²⁺ causes the FE. In FT-IR experiments, a prominent peak at 670 cm^-1, corresponding to Cd-S stretching vibrations, indicates strong ground-state interactions between the -SH of GSH and Cd²⁺ ions. Moreover, a decrease in the diffusion coefficient of QDs in the presence of Cd²⁺ ions during fluorescence correlation spectroscopy (FCS) studies further substantiates the removal of GSH by Cd²⁺ from the surface of QDs. The optical output of this study demonstrates that ZAIS can be used for fluorescence signaling of various metal ions and in particular selective detection of Cd²⁺. More importantly, these results also suggest that Cd²⁺ can effectively be used for enhancing the fluorescence quantum yield of thiol-capped QDs such as GSH@ZAIS.

Transferrin-Decorated Niosomes with Integrated InP/ZnS Quantum Dots and Magnetic Iron Oxide Nanoparticles: Dual Targeting and Imaging of Glioma

The development of multifunctional nanoscale systems that can mediate efficient tumor targeting, together with high cellular internalization, is crucial for the diagnosis of glioma. The combination of imaging agents into one platform provides dual imaging and allows further surface modification with targeting ligands for specific glioma detection. Herein, transferrin (Tf)-decorated niosomes with integrated magnetic iron oxide nanoparticles (MIONs) and quantum dots (QDs) were formulated (PEGNIO/QDs/MIONs/Tf) for efficient imaging of glioma, supported by magnetic and active targeting. Transmission electron microscopy confirmed the complete co-encapsulation of MIONs and QDs in the niosomes. Flow cytometry analysis demonstrated enhanced cellular uptake of the niosomal formulation by glioma cells. In vitro imaging studies showed that PEGNIO/QDs/MIONs/Tf produces an obvious negative-contrast enhancement effect on glioma cells by magnetic resonance imaging (MRI) and also improved fluorescence intensity under fluorescence microscopy. This novel platform represents the first niosome-based system which combines magnetic nanoparticles and QDs, and has application potential in dual-targeted imaging of glioma.

Temporal Changes in Interparticle Interactions Drive the Formation of Transiently Stable Nanoparticle Precipitates

We demonstrate the power of fine-tuned interparticle interactions, emanating from appropriately functionalized surfaces, in creating self-assembled structures that show a transient switching between completely precipitated and redispersed stages of nanoparticles (NPs). The pH-dependent temporal changes in the strength of electrostatic interactions are explored to unveil a transient self-assembly response in plasmonic NPs. The assembly process was triggered by the electrostatic attraction between positively charged gold NPs (AuNPs) and an aggregating agent, ethylenediaminetetraacetic acid (EDTA). The autonomous changes in the pH and ionic strength of the solution, under the influence of atmospheric CO₂, weaken the aggregating ability of EDTA and initiate the complete disassembly of [+] AuNP-EDTA precipitates. The use of a nondestructive mode of autonomous disassembly helped in achieving some of the desirable feats in the field of transient self-assembly such as easy removal of waste, formation of a transiently stable precipitate state, and negligible dampness in redispersion. The chemical strategy adopted in the present work, to introduce transientness, can act as a generic tool in creating the next generation of complex matter.

Probing the Interaction of Bovine Serum Albumin with Copper Nanoclusters: Realization of Binding Pathway Different from Protein Corona

With an aim to understand the interaction mechanism of bovine serum albumin (BSA) with copper nanoclusters (CuNCs), three different types CuNCs having chemically different surface ligands, namely, tannic acid (TA), chitosan, and cysteine (Cys), have been fabricated, and investigations are carried out in the absence and presence of protein (BSA) at ensemble-averaged and single-molecule levels. The CuNCs, capped with different surface ligands, are consciously chosen so that the role of surface ligands in the overall protein-NCs interactions is clearly understood, but, more importantly, to find whether these CuNCs can interact with protein in a new pathway without forming the "protein corona", which otherwise has been observed in relatively larger nanoparticles when they are exposed to biological fluids. Analysis of the data obtained from fluorescence, ζ-potential, and ITC measurements has clearly indicated that the BSA protein in the presence of CuNCs does not attain the binding stoichiometry (BSA/CuNCs > 1) that is required for the formation of "protein corona". This conclusion is further substantiated by the outcome of the fluorescence correlation spectroscopy (FCS) study. Further analysis of data and thermodynamic calculations have revealed that the surface ligands of the CuNCs play an important role in the protein-NCs binding events, and they can alter the mode and thermodynamics of the process. Specifically, the data have demonstrated that the binding of BSA with TA-CuNCs and Chitosan-CuNCs follows two types of binding modes; however, the same with Cys-CuNCs goes through only one type of binding mode. Circular dichroism (CD) measurements have indicated that the basic structure of BSA remains almost unaltered in the presence of CuNCs. The outcome of the present study is expected to encourage and enable better application of NCs in biological applications.

Exploring the Biocompatibility of Near-IR CuInSexS2-x/ZnS Quantum Dots for Deep-Tissue Bioimaging

Near-infrared (NIR) emitting quantum dots (QDs) with emission in the biological transparency windows (NIR-I: 650-950 nm and NIR-II: 1000-1350 nm) are promising candidates for deep-tissue bioimaging. However, they typically contain toxic heavy metals such as cadmium, mercury, arsenic, or lead. We report on the biocompatibility of high brightness CuInSe_xS_2-x/ZnS (CISeS/ZnS) QDs with a tunable emission covering the visible to NIR (550-1300 nm peak emission) and quantify the transmission of their photoluminescence through multiple biological components to evaluate their use as imaging agents. In general, CISeS/ZnS QDs were less cytotoxic to mouse fibroblast cells when compared with commercial CdSe/ZnS and InP/ZnS QDs. Surprisingly, InP/ZnS QDs significantly upregulated expression of apoptotic genes in mouse fibroblast cells, while cells exposed to CISeS/ZnS QDs did not. These findings provide insight into biocompatibility and cytotoxicity of CISeS/ZnS QDs that could be used for bioimaging.

Electrostatically Driven Resonance Energy Transfer in an All-Quantum Dot Based Donor-Acceptor System

Demonstration of fundamental photophysical properties in environmentally friendly quantum dots (QDs) is essential to realize their practical use in various light harvesting applications. We accomplish here an efficient light induced resonance energy transfer in all-QD based donor-acceptor system in water, deprived of any commonly used organic dye component. Our nanohybrid system comprises surface engineered indium phosphide/zinc sulfide (InP/ZnS) QD as the donor, and copper indium sulfide/zinc sulfide (CIS/ZnS) QD as the acceptor. The electrostatic attraction between oppositely charged QDs is vital in achieving a strong ground state complexation in the [-] InP/ZnS:::[+] CIS/ZnS QD nanohybrid. A nonlinear Stern-Volmer plot confirms the involvement of both static and dynamic components in the PL quenching of InP/ZnS QD by CIS/ZnS QD. Moreover, a temporal evolution of resonance energy transfer is realized in the solid state as well, which can improve the potential of such "all-green QD" based nanohybrid systems for device level studies.

Synergistic interactions of cadmium-free quantum dots embedded in a photosensitised polymer surface: efficient killing of multidrug-resistant strains at low ambient light levels

Cadmium-free quantum dots (QD) were combined with crystal violet photosensitising dye and incorporated into medical grade polyurethane via a non-covalent dipping process known as 'swell-encapsulation-shrink'. The antibacterial efficacy of the prepared quantum dot-crystal violet polyurethane substrates (QD + CV PU) was investigated under low power visible light illumination at similar intensities (500 lux) to those present in clinical settings. The antibacterial performance of QD + CV PU was superior to the constituent polymer substrates, eliminating ∼99.9% of an environmental P. aeruginosa strain, a clinical P. aeruginosa strain from a cystic fibrosis patient and a clinical E. coli strain. The nature of the reactive oxygen species (ROS) involved in antibacterial activity of the QD + CV PU surface was investigated using ROS inhibitors and time-resolved optical spectroscopy. The photo-physical interactions of the green-emitting QDs with CV lead to a combination of Type I and II electron transfer and energy transfer processes, with the highly potent ROS singlet oxygen playing a dominant role. This study is the first to demonstrate highly efficient synergistic killing of clinical and environmental strains of intrinsically resistant and multi-drug resistant Gram-negative bacteria using light-activated surfaces containing biocompatible cadmium-free QDs and crystal violet dye at ambient light levels.

Multicolor Luminescent Patterning via Photoregulation of Electron and Energy Transfer Processes in Quantum Dots

Ability to create high-contrast multicolor luminescent patterns is essential to realize the full potential of quantum dots (QDs) in display technologies. The idea of using a nonemissive state is adopted in the present work to enhance the color-contrast of QD-based photopatterns. This is achieved at a multicolor level by the photoregulation of electron and energy transfer processes in a single QD nanohybrid film, composed of one QD donor and two dye acceptors. The dominance of photoinduced electron transfer over the energy transfer process generates a nonluminescent QD nanohybrid film, which provides the black background for multicolor patterning. The superior photostability of QDs over dyes is used for the photoregulation of electron and energy transfer processes. Selective photodegradation of electron acceptor dye triggered the onset of the energy transfer process, thereby imparting a luminescent color to the QD nanohybrid film. Further, a controlled photoregulation of energy transfer process paved the way for multicolor patterning.

Interaction of amphiphilic coumarin with DPPC/DPPS lipid bilayer: effects of concentration and alkyl tail length

In this work, interactions between amphiphilic amino methyl coumarin and dipalmitoyl-sn-glycero-3-phosphocholine/dipalmitoyl-sn-glycero-3-phosphoserine (DPPC/DPPS) lipid bilayer were investigated. A combination of experimental techniques (zeta potential, fluorescence spectroscopy, and differential scanning calorimetry) along with molecular dynamics simulations was employed to examine the influence of alkyl tail length and concentration of the amphiphilic coumarin on the lipid bilayer. Alkyl tails comprising 5(C₅), 9(C₉), and 12(C₁₂) carbon atoms were conjugated to amino methyl coumarin via a single-step process. The binding and insertion mechanisms of the amphiphilic coumarins were studied in increasing concentrations for short-tailed (C₅) and long-tailed (C₁₂) coumarins. The simulation results show that C₅ coumarin molecules penetrate the lipid bilayer, but owing to the short alkyl tail, they interact primarily with the lipid head groups resulting in lipid bilayer thinning; however, at high concentrations, the C₅ coumarins undergo continuous insertion-ejection from the outer leaflet of the lipid bilayer. In contrast, C₁₂ coumarins interact favorably with the hydrophobic lipid tails and lack the ejection-reinsertion behavior. Instead, the C₁₂ coumarin molecules undergo flip-flops between the outer and inner leaflets of the lipid bilayer. At high concentrations, the high-frequency flip-flops lead to lipid destabilization, causing the lipid bilayer to rupture. The simulation results are in excellent agreement with the toxicity of amphiphilic coumarin activity in cancer cells. The efficacy of amphiphilic coumarins in liposomal lipid bilayers demonstrates the promise of these molecules as a tool in the treatment of cancer.

Solvation of quantum dots in 1-alkyl-1-methylpyrrolidinium ionic liquids: toward stably luminescent composites

CdTe nanoparticles capped with a cationic thiolate ligand were stably dispersed in ionic liquids, 1-alkyl-1-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)amides with an alkyl group of n-propyl, butyl and octyl-chain, and in an ionic plastic crystal, 1-ethyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide. Dispersion behavior of CdTe nanoparticles in these ionic media was evaluated, in which the solvation of nanoparticles by the ionic components was particularly interested. The ionic media showed alkyl-chain length-dependent solvation behavior, which was suggested by the thermal analysis of nanocomposites. The longer alkyl-chains led to the greater decrease in the thermal melting enthalpy of ionic media with the introduction of nanoparticles. The ionic liquid with an octyl-chain, which is considered to form a thicker solvation layer, afforded better emission durability of CdTe nanoparticles compared to the ionic liquid with a shorter alkyl chain.

Highly efficient energy transfer from a water soluble zinc silver indium sulphide quantum dot to organic J-aggregates

Highly efficient energy transfer from a water soluble quantum dot to organic J-aggregates in an inorganic–organic nanohybrid associate.

Fluorescence resonance energy transfer in multifunctional nanofibers designed via block copolymer self-assembly

In the present study, we demonstrate the fabrication of multifunctional nanofibers, loaded with CdSe quantum dots (QDs) and sulforhodamine 101 (S101) dye, via the self-assembly process of a polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) block copolymer (BCP). The CdSe QDs and S101 dye were simultaneously incorporated in the cylindrical domains, constituted of P4VP blocks, of the self-assembled BCP structure. The cylindrical domains subsequently were isolated as individual nanofibers via the selective-swelling approach. The confinement imposed due to the nano-dimension geometry of the cylindrical domains enabled the QDs and S101 dye to localize within their Förster radius enabling an efficient fluorescence resonance energy transfer (FRET) between them. The mean lifetime of donor emission varied from 4.56 to 3.38 ns with the change in the ratio of S101 dye and CdSe QDs within the nanofibers. Furthermore, using efficiency measurements and the corresponding Förster distances, donor-acceptor distances were determined. Moreover, the kinetics of energy transfer from CdSe QDs to S101 was studied by the Poisson binding model, to understand the interactions between CdSe QDs and S101 dye molecules. The numbers of dye molecules per CdSe QD were determined, by assuming random distribution of S101 dye molecules around the CdSe QDs in the nanofibers. The results showed that the number of dye molecules per QD increased with increasing concentration of dye molecules in the nanofibers. The resulting multifunctional nanofibers could have potential applications in optoelectronics, photonics and sensors which utilize the FRET process.

Photoactivable Polymers Embedded with Cadmium-Free Quantum Dots and Crystal Violet: Efficient Bactericidal Activity against Clinical Strains of Antibiotic-Resistant Bacteria

The rising incidence of antibiotic-resistant infections from contaminated surfaces in hospitals or implanted medical devices has led to increasing interest in new antibacterial surfaces. Photoactivatable surfaces that can generate cytotoxic reactive oxygen species under exposure to ambient light is a promising approach to inactivation of surface-borne microorganisms. There is growing interest in the use of quantum dots (QDs) as light-harvesting agents for photobactericidal applications, but the cadmium in commonly used QDs will restrict clinical application. Herein, the photobactericidal activity of novel polyurethane substrates containing cadmium-free QDs was tested against clinical multidrug-resistant Gram-positive and Gram-negative bacterial strains: methicillin-resistant Staphylococcus aureus (MRSA) and a carbapenemase-producing strain of Escherichia coli ( E. coli). To enhance the capacity for reactive oxygen species generation, QDs were incorporated into the polymer with a photosensitizing dye, crystal violet. Close proximity between the QD and dye enables electron and energy transfer processes leading to generation of cytotoxic singlet oxygen and superoxide radicals. A QD solution in cyclohexane was premixed with a solution of CV in the more polar solvent, dichloromethane, to promote the formation of QD-CV nanocomposite complexes via CV adsorption. This solution was then used to embed the QDs and crystal violet into medical grade polyurethane via swell-encapsulation. The combination of QD and CV elicited significant synergistic antibacterial activity under visible light against MRSA within 1 h (99.98% reduction) and E. coli within 4 h (99.96% reduction). Photoluminescence lifetime and singlet oxygen phosphorescence measurements demonstrated that interaction between the QDs and the crystal violet occurs within the polymer and leads to enhanced generation of reactive oxygen species. Strong inhibition of kill was observed using the superoxide scavenger, superoxide dismutase. The efficacy of these QD-CV polymer substrates, that can harvest light across the visible spectrum, against multidrug-resistant bacteria demonstrates the feasibility of this approach.

Carbon Dot with pH Independent Near-Unity Photoluminescence Quantum Yield in an Aqueous Medium: Electrostatics-Induced Förster Resonance Energy Transfer at Submicromolar Concentration

We report the synthesis and dynamical behavior of a carbon dot (CD) with near 100% photoluminescence quantum yield in water for a very large pH range (1-12). This CD exhibits a rotational correlational time of only ∼130 ps, signifying the whole CD is not exhibiting photoluminescence. Unlike most carbon-based nanoparticles (which act as a quencher of fluorescence), this CD could act as a donor, and the Förster model could account for the experimental observables for the resonance energy transfer (RET) experiment quite well. Based on two dynamical measurements, it could be shown that the fluorescing moiety is located inside the core of the CD. Importantly, for this CD, RET experiments could be performed with a very low concentration (500 nM) of the acceptor. This kind of electrostatics-driven RET at very low concentration is quite important in bioimaging. This ultrabright CD is nontoxic and useful for bioimaging in mesenchymal stem cells.

Azophenine as Central Core for Efficient Light Harvesting Devices

The notoriously non-luminescent uncycled azophenine (Q) was harnessed with Bodipy and zinc(II)porphyrin antennas to probe its fluorescence properties, its ability to act as a singlet excited state energy acceptor and to mediate the transfer. Two near-IR emissions are depicted from time-resolved fluorescence spectroscopy, which are most likely due to the presence of tautomers of very similar calculated total energies (350 cm^-1 ; DFT; B3LYP). The rates for energy transfer, k_ET (S₁ ), for ¹ Bodipy*→Q are in the order of 10¹⁰ -10¹¹  s^-1 and are surprisingly fast when considering the low absorptivity properties of the lowest energy charge transfer excited state of azophenine. The rational is provided by the calculated frontier molecular orbitals (MOs) which show atomic contributions in the C₆ H₄ C≡CC₆ H₄ arms, thus favoring the double electron exchange mechanism. In the mixed-antenna Bodipy-porphyrin star molecule, the rate for ¹ Bodipy*→porphyrin has also been evaluated (≈16×10¹⁰  s^-1 ) and is among the fastest rates reported for Bodipy-zinc(II)porphyrin pairs. This astonishing result is again explained from the atomic contributions of the C₆ H₄ C≡CC₆ H₄ and C≡CC₆ H₄ arms thus favouring the Dexter process. Here, for the first time, this process is found to be sensitively temperature-dependent. The azophenine turns out to be excellent for electronic communication.

Evidence of homo-FRET in quantum dot–dye heterostructured assembly

Evidence of homo-FRET in inorganic–organic hybrid hetero-structured assembly is demonstrated

Programmed Self-Assembly of Branched Nanocrystals with an Amphiphilic Surface Pattern

Site-selective surface modification on the shape-controlled nanocrystals is a key approach in the programmed self-assembly of inorganic colloidal materials. This study demonstrates a simple methodology to gain self-assemblies of semiconductor nanocrystals with branched shapes through tip-to-tip attachment. Short-chained water-soluble cationic thiols are employed as a surface ligand for CdSe tetrapods and CdSe/CdS core/shell octapods. Because of the less affinity of arm-tip to the surface ligands compared to the arm-side wall, the tip-surface becomes uncapped to give a hydrophobic nature, affording an amphiphilic surface pattern. The amphiphilic tetrapods aggregated into porous agglomerates through tip-to-tip connection in water, while they afforded a hexagonally arranged Kagome-like two-dimensional (2D) assembly by the simple casting of aqueous dispersion with the aid of a convective self-assembly mechanism. A 2D net-like assembly was similarly obtained from amphiphilic octapods. A dissipative particle dynamics simulation using a planar tripod model with an amphiphilic surface pattern reproduced the formation of the Kagome-like assembly in a 2D confined space, demonstrating that the lateral diffusion of nanoparticles and the firm contacts between the hydrophobic tips play crucial roles in the self-assembly.

InP/ZnSe/ZnS quantum dots with strong dual emissions: visible excitonic emission and near-infrared surface defect emission and their application in in vitro and in vivo bioimaging

Unique oil-soluble InP/ZnSe/ZnS QDs with strong visible excitonic and NIR surface defect emissions were synthesized and used in multi-scale bioimaging.