Chromium complexes for luminescence, solar cells, photoredox catalysis, upconversion, and phototriggered NO release

Ferromagnetically Coupled Chromium(III) Dimer Shows Luminescence and Sensitizes Photon Upconversion

There has been much progress on mononuclear chromium(III) complexes featuring luminescence and photoredox activity, but dinuclear chromium(III) complexes have remained underexplored in these contexts until now. We identified a tridentate chelate ligand able to accommodate both meridional and facial coordination of chromium(III), to either access a mono- or a dinuclear chromium(III) complex depending on reaction conditions. This chelate ligand causes tetragonally distorted primary coordination spheres around chromium(III) in both complexes, entailing comparatively short excited-state lifetimes in the range of 400 to 800 ns in solution at room temperature and making photoluminescence essentially oxygen insensitive. The two chromium(III) ions in the dimer experience ferromagnetic exchange interactions that result in a high spin (S=3) ground state with a coupling constant of +9.3 cm-1. Photoinduced energy transfer from the luminescent ferromagnetically coupled dimer to an anthracene derivative results in sensitized triplet-triplet annihilation upconversion. Based on these proof-of-principle studies, dinuclear chromium(III) complexes seem attractive for the development of fundamentally new types of photophysics and photochemistry enabled by magnetic exchange interactions.

Additional Insights into the Design of Cr(III) Phosphorescent Emitters Using 6-Membered Chelate Ring Bis(imidazolyl) Didentate Ligands

The interest in Cr(III) complexes has been renewed over the past decades for building practical guidelines in the design of efficient earth-abundant phosphorescent near-infrared emitters. In that context, we report the first family of homoleptic tri(didentate) Cr(III) complexes [CrL3]3+ based on polyaromatic ligands inducing 6-membered chelate rings, namely, the bis(1-methylimidazol-2-yl)ketone (L = bik), bis(1-methylimidazol-2-yl)methane (L = bim), and bis(1-methylimidazol-2-yl)ethane (L = bie) ligands. The programmed close-to-perfect octahedral microsymmetry of {CrIIIN6} chromophores found in [Cr(bik)3](OTf)3 (1), [Cr(bim)3](OTf)3 (2), and [Cr(bie)3](BF4)3 (3) ensures a ligand-field strength large enough to induce intense and long-lived Cr-based phosphorescence. Impressive excited-state lifetimes (5.0-8.2 ms) were obtained at low temperatures for the [Cr(L)3]3+ series. Additionally, the photoluminescent quantum yield climbs to 0.8% for compound 1 in deaerated solutions. Moreover, the photophysical features of the three homoleptic complexes are barely influenced by the presence of dioxygen presumably because of the poor overlap between the Cr-based phosphorescence spectra (ca. 14100 cm-1) and the 1Σg+ ← 3Σg- transition in the absorption spectrum of dioxygen (13100 cm-1). The multiredox electrochemical pattern of 1 is evidenced by cyclic voltammetry as well as its strong photooxidant behavior. The pH sensitivity of 2 and 3 luminescence is discussed, along with the reactivity of their β-diketiminate derivatives.

Enhanced Visible Light Absorption in Heteroleptic Cuprous Phenanthrolines

This work presents a series of Cu(I) heteroleptic 1,10-phenanthroline chromophores featuring enhanced UVA and visible-light-harvesting properties manifested through vectorial control of the copper-to-phenanthroline charge-transfer transitions. The molecules were prepared using the HETPHEN strategy, wherein a sterically congested 2,9-dimesityl-1,10-phenanthrolne (mesPhen) ligand was paired with a second phenanthroline ligand incorporating extended π-systems in their 4,7-positions. The combination of electrochemistry, static and time-resolved electronic spectroscopy, 77 K photoluminescence spectra, and time-dependent density functional theory calculations corroborated all of the experimental findings. The model chromophore, [Cu(mesPhen)(phen)]+ (1), lacking 4,7-substitutions preferentially reduces the mesPhen ligand in the lowest energy metal-to-ligand charge-transfer (MLCT) excited state. The remaining cuprous phenanthrolines (2-4) preferentially reduce their π-conjugated ligands in the low-lying MLCT excited state. The absorption cross sections of 2-4 were enhanced (εMLCTmax = 7430-9980 M-1 cm-1) and significantly broadened across the UVA and visible regions of the spectrum compared to 1 (εMLCTmax = 6494 M-1 cm-1). The excited-state decay mechanism mirrored those of long-lived homoleptic Cu(I) phenanthrolines, yielding three distinguishable time constants in ultrafast transient absorption experiments. These represent pseudo-Jahn-Teller distortion (τ1), singlet-triplet intersystem crossing (τ2), and the relaxed MLCT excited-state lifetime (τ3). Effective light-harvesting from Cu(I)-based chromophores can now be rationalized within the HETPHEN strategy while achieving directionality in their respective MLCT transitions, valuable for integration into more complex donor-acceptor architectures and longer-lived photosensitizers.

Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Mechanism of Oxygen Quenching of the Excited States of Heteroleptic Chromium(III) Phenanthroline Derivatives

In this study, we report the synthesis and characterization of some heteroleptic Cr(III) complexes of the form [Cr(Phen)2L](OTf)3, where Phen = 1,10-phenanthroline and L is either 2,2'-bipyridine (bpy) or its derivatives, such as 4,4'-dimethyl-2,2'-bipyridine (4,4'-DMB), 4,4'-dimethoxy-2,2'-bipyridine (4,4'-DMOB), 4,4'-ditert-butyl-2,2'-bipyridine (4,4'-dtbpy), 5,5'-dimethyl-2,2'-bipyridine (5,5'-DMB), 4,4'-dimethoxycarbonyl-2,2'-bipyridine (4,4'-dmcbpy) or 1,10-phenanthroline derivatives, such as 5-methyl-1,10-phenanthroline (5-Me-Phen) and 4,7-dimethyl-1,10-phenanthroline (4,7-DMP). Heteroleptic complexes were prepared in two stages via the intermediate [Cr(Phen)2(CF3SO3)2](CF3SO3) and five examples have been crystallographically characterized. Steady-state absorption and luminescence emission characteristics of these complexes were measured in 1 M HCl solutions. The luminescence quantum yield of these complexes was found to be the lowest for [Cr(Phen)2(4,4'-dmcbpy)](OTf)3 and the highest for [Cr(Phen)2(4,4'-DMB)](OTf)3 with values of 0.31 × 10-2 and 1.48 × 10-2, respectively. The calculated excited state energy, E0-0, was found to vary within the narrow range of 163.1-165.0 kJ mol-1 across the series. Transient absorption spectra in degassed, air-equilibrated, and oxygen-saturated 1 M HCl aqueous solutions were also measured at different time decays and demonstrated no significant differences, indicating the absence of any ion-separated species in the excited state. Excited-state decay traces at the wavelength of maximum absorption were used to calculate oxygen quenching rate constants, kq, which were found to be in the range 3.26-5.27 × 107 M-1 s-1. Singlet oxygen luminescence photosensitized by these complexes was observed in D2O, and its luminescence intensity at 1270 nm was used for the determination of singlet oxygen quantum yields for these complexes, which were in the range of 0.20-0.44, while the fraction of the excited 2E state quenched by oxygen was in the range of 0.22-0.68, and the efficiency of singlet oxygen production was in the range of 0.44-0.90. The mechanism by which the excited 2E state is quenched by oxygen is explained by a spin statistical model that predicts the balance between charge transfer and noncharge transfer deactivation pathways, which was represented by the parameter pCT that was found to vary from 0.35 to 0.68 for this series of Cr(III) complexes.

Modulating Resonance Energy Transfer with Supramolecular Control in a Layered Hybrid Perovskite and Chromium Photosensitizer Assembly

Recently, the low-dimensional organic-inorganic halide perovskites (OIHP) have been exploited heavily for their favorable exciton dynamics, broad-band emission, remarkable stability, and tunable band-edge excited-state energy compared to their 3D counterparts for potential optoelectronic applications. Low-dimensional perovskites are generally good candidates for utilization as room-temperature photoluminescence (PL) materials. Further, doping divalent transition metals like Mn²⁺ into OIHP is expected to introduce a ⁴T₁-⁶A₁-based low-energy luminescence emission around 600 nm; an optical property that is favorable for biomedical optoelectronics. Doping Mn²⁺ in the perovskite lattice is also expected to induce the generation of cytotoxic singlet oxygen species (¹O₂), a ROS that is being exploited for various therapeutic applications. To integrate these optical and therapeutic properties of a 2D (PEA)₂PbBr₄ (Pb PeV; PEA = phenylethylammonium cation) perovskite alloyed with Mn²⁺ ions (Mn:PbPeV) and the option for a photoinduced energy transfer process involving a Cr(III)-based ¹O₂ generating photosensitizer (CrPS), we designed a unique purpose-built nanoassembly (Mn:PbPeV@PCD) using the encapsulation properties of a water-soluble polymer derived from β-cyclodextrin (PCD). Here the PCD is observed to modulate the classical internal energy transfer of Pb²⁺ exciton to alloyed Mn²⁺ orange emission, resulting in the emergence of a new blue emission. The addition of CrPS into the Mn:PbPeV@PCD to generate the CrPS@Mn:PbPeV@PCD assembly results in restoring perovskite luminescence followed by the external energy transfer to CrPS. We have elucidated the mechanism of these cascade energy transfer processes between multiple components using steady-state and time-resolved luminescence techniques. Efficient ROS generation and its potential to induce an oxidation reaction of a biomolecule are realized using guanine as the target molecule. Further photoinduced cleavage studies with biomolecules confirmed the efficacy of the nanoassembly in inducing the cleavage of guanine-rich DNA. The study opens up a new direction in the field of perovskite for biomedical applications.

Direct Determination of the Rate of Intersystem Crossing in a Near-IR Luminescent Cr(III) Triazolyl Complex

A detailed understanding of the dynamics of photoinduced processes occurring in the electronic excited state is essential in informing the rational design of photoactive transition-metal complexes. Here, the rate of intersystem crossing in a Cr(III)-centered spin-flip emitter is directly determined through the use of ultrafast broadband fluorescence upconversion spectroscopy (FLUPS). In this contribution, we combine 1,2,3-triazole-based ligands with a Cr(III) center and report the solution-stable complex [Cr(btmp)₂]³⁺ (btmp = 2,6-bis(4-phenyl-1,2,3-triazol-1-yl-methyl)pyridine) (1³⁺), which displays near-infrared (NIR) luminescence at 760 nm (τ = 13.7 μs, ϕ = 0.1%) in fluid solution. The excited-state properties of 1³⁺ are probed in detail through a combination of ultrafast transient absorption (TA) and femtosecond-to-picosecond FLUPS. Although TA spectroscopy allows us to observe the evolution of phosphorescent excited states within the doublet manifold, more significantly and for the first time for a complex of Cr(III), we utilize FLUPS to capture the short-lived fluorescence from initially populated quartet excited states immediately prior to the intersystem crossing process. The decay of fluorescence from the low-lying ⁴MC state therefore allows us to assign a value of (823 fs)^-1 to the rate of intersystem crossing. Importantly, the sensitivity of FLUPS to only luminescent states allows us to disentangle the rate of intersystem crossing from other closely associated excited-state events, something which has not been possible in the spectroscopic studies previously reported for luminescent Cr(III) systems.

Bichromophoric Photosensitizers: How and Where to Attach Pyrene Moieties to Phenanthroline to Generate Copper(I) Complexes

Pyrene is a polycyclic aromatic hydrocarbon and organic dye that can form superior bichromophoric systems when combined with a transition metal-based chromophore. However, little is known about the effect of the type of attachment (i.e., 1- vs 2-pyrenyl) and the individual position of the pyrenyl substituents at the ligand. Therefore, a systematic series of three novel diimine ligands and their respective heteroleptic diimine-diphosphine copper(I) complexes has been designed and extensively studied. Special attention was given to two different substitution strategies: (i) attaching pyrene via its 1-position, which occurs most frequently in the literature, or via its 2-position and (ii) targeting two contrasting substitution patterns at the 1,10-phenanthroline ligand, i.e., the 5,6- and the 4,7-position. In the applied spectroscopic, electrochemical, and theoretical methods (UV/vis, emission, time-resolved luminescence and transient absorption, cyclic voltammetry, density functional theory), it has been shown that the precise choice of the derivatization sites is crucial. Substituting the pyridine rings of phenanthroline in the 4,7-position with the 1-pyrenyl moiety has the strongest impact on the bichromophore. This approach results in the most anodically shifted reduction potential and a drastic increase in the excited state lifetime by more than two orders of magnitude. In addition, it enables the highest singlet oxygen quantum yield of 96% and the most beneficial activity in the photocatalytic oxidation of 1,5-dihydroxy-naphthalene.

Employing Long-Range Inductive Effects to Modulate Metal-to-Ligand Charge Transfer Photoluminescence in Homoleptic Cu(I) Complexes

Four Cu(I) bis(phenanthroline) photosensitizers formulated from a new ligand structural motif (Cu1-Cu4) coded according to their 2,9-substituents were synthesized, structurally characterized, and fully evaluated using steady-state and time-resolved absorption and photoluminescence (PL) measurements as well as electrochemistry. The 2,9-disubstituted-3,4,7,8-tetramethyl-1,10-phenanthroline ligands feature the following six-membered ring systems prepared through photochemical synthesis: 4,4-dimethylcyclohexyl (1), tetrahydro-2H-pyran-4-yl (2), tetrahydro-2H-thiopyran-4-yl (3), and 4,4-difluorocyclohexyl (4). Universally, these Cu(I) metal-to-ligand charge transfer (MLCT) chromophores display excited-state lifetimes on the microsecond time scale at room temperature, including the three longest-lived homoleptic cuprous phenanthroline excited states measured to date in de-aerated CH₂Cl₂, τ = 2.5-4.3 μs. This series of molecules also feature high PL quantum efficiencies (Φ_PL = 5.3-12% in CH₂Cl₂). Temperature-dependent PL lifetime experiments confirmed that all these molecules exhibit reverse intersystem crossing and display thermally activated delayed PL from a ¹MLCT excited state lying slightly above the ³MLCT state, 1050-1490 cm^-1. Ultrafast and conventional transient absorption measurements confirmed that the PL originates from the MLCT excited state, which remains sterically arrested, preventing an excessive flattening distortion even when dissolved in Lewis basic CH₃CN. Combined PL and electrochemical data provided evidence that Cu1-Cu4 are highly potent photoreductants (E_ox* = -1.73 to -1.62 V vs Fc^+/0 in CH₃CN), whose potentials are altered solely based on which heteroatoms or substituents are resident on the 2,9-appended ring derivatives. It is proposed that long-range electronic inductive effects are responsible for the systematic modulation observed in the PL spectra, excited-state lifetimes, and the ground state absorption spectra and redox potentials. Cu1-Cu4 quantitatively follow the energy gap law, correlating well with structurally related cuprous phenanthrolines and are also shown to triplet photosensitize the excited states of 9,10-diphenylanthracene with bimolecular rate constants ranging from 1.61 to 2.82 × 10⁸ M^-1 s^-1. The ability to tailor both photophysical and electrochemical properties using long-range inductive effects imposed by the 2,9-ring platforms advocates new directions for future MLCT chromophore discovery.

Recent Advances of Anticancer Studies Based on Nano-Fluorescent Metal-Organic Frameworks

Nano-fluorescent metal-organic frameworks (NF-MOFs), a kind of newly emerged nano-scaled platform, can provide visual, rapid, and highly sensitive optical imaging of cancer lesions both in vitro and in vivo. Meanwhile, the excellent porosity, structural tunability, and chemical modifiability also enable NF-MOFs to achieve simultaneous loading of targeted molecules and therapeutic agents. These NF-MOFs not only possess excellent targeted imaging ability, but also can guide the carried cargos to perform precise therapy, drawing considerable attention in current framework of anticancer drug design. In this review, we outline the fluorescence types and response mechanisms of NF-MOFs, and highlight their applications in cancer diagnosis and therapy in recent years. Based on this panorama, we also discuss current issues and future trends of NF-MOFs in biomedical fields, attempting to clarify the potential value of fluorescence imaging guided anticancer investigations.

Broadband and strong visible-light-absorbing cuprous sensitizers for boosting photosynthesis

Rational construction of broadband and strong visible-light-absorbing (BSVLA) earth-abundant complexes is of great importance for efficient and sustainable solar energy utilization. Herein, we explore a universal Cu(I) center to couple with multiple strong visible-light-absorbing antennas to break the energy level limitations of the current noble-metal complexes, resulting in the BSVLA nonprecious complex (Cu-3). Systematic investigations demonstrate that double "ping-pong" energy-transfer processes in Cu-3 involving resonance energy transfer and Dexter mechanism enable a BSVLA between 430 and 620 nm and an antenna-localized long-lived triplet state for efficient intermolecular electron/energy transfer. Impressively, Cu-3 exhibited an outstanding performance for both energy- and electron-transfer reactions. Pseudo-first-order rate constant of photooxidation of 1,5-dihydroxynaphthalene with Cu-3 can achieve a record value of 190.8 × 10^-3 min^-1 among the molecular catalytic systems, over 30 times higher than that with a noble-metal photosensitizer (PS) [Ru(bpy)₃]²⁺. These findings pave the way to develop BSVLA earth-abundant PSs for boosting photosynthesis.

Shedding Light on the Oxidizing Properties of Spin-Flip Excited States in a CrIII Polypyridine Complex and Their Use in Photoredox Catalysis

The photoredox activity of well-known Ru^II complexes stems from metal-to-ligand charge transfer (MLCT) excited states, in which a ligand-based electron can initiate chemical reductions and a metal-centered hole can trigger oxidations. Cr^III polypyridines show similar photoredox properties, although they have fundamentally different electronic structures. Their photoactive excited state is of spin-flip nature, differing from the electronic ground state merely by a change of one electron spin, but with otherwise identical d-orbital occupancy. We find that the driving-force dependence for photoinduced electron transfer from 10 different donors to a spin-flip excited state of a Cr^III complex is very similar to that for a Ru^II polypyridine, and thereby validate the concept of estimating the redox potential of d³ spin-flip excited states in analogous manner as for the MLCT states of d⁶ compounds. Building on this insight, we use our Cr^III complex for photocatalytic reactions not previously explored with this compound class, including the aerobic bromination of methoxyaryls, oxygenation of 1,1,2,2-tetraphenylethylene, aerobic hydroxylation of arylboronic acids, and the vinylation of N-phenyl pyrrolidine. This work contributes to understanding the fundamental photochemical properties of first-row transition-metal complexes in comparison to well-explored precious-metal-based photocatalysts.

Complex-as-Ligand Strategy as a Tool for the Design of a Binuclear Nonsymmetrical Chromium(III) Assembly: Near-Infrared Double Emission and Intramolecular Energy Transfer

The chromium(III) polypyridyl complexes are appealing for their long-lived near-infrared (NIR) emission reaching the millisecond range and for the strong circularly polarized luminescence of their isolated enantiomers. However, harnessing those properties in functional polynuclear Cr^III devices remains mainly inaccessible because of the lack of synthetic methods for their design and functionalization. Even the preparation and investigation of most basic nonsymmetrical Cr^III dyads exhibiting directional intramolecular intermetallic energy transfer remain unexplored. Taking advantage of the inertness of heteroleptic chromium(III) polypyridyl building blocks, we herein adapt the "complex-as-ligand" strategy, largely used with precious 4d and 5d metals, for the preparation of a binuclear nonsymmetrical Cr^III complex (3d metal). The resulting [(phen)₂Cr(L)Cr(tpy)]⁶⁺ dyad shows dual long-lived NIR emission and a directional intermetallic energy transfer that is controlled by the specific arrangements of the different coordination spheres. This strategy opens a route for building predetermined polynuclear assemblies with this earth-abundant metal.

Luminescent Metal Complexes for Bioassays in the Near-Infrared (NIR) Region

Near-infrared (NIR, 700-1700 nm) luminescent imaging is an emerging bioimaging technology with low photon scattering, minimal autofluorescence, deep tissue penetration, and high spatiotemporal resolution that has shown fascinating promise for NIR imaging-guided theranostics. In recent progress, NIR luminescent metal complexes have attracted substantially increased research attention owing to their intrinsic merits, including small size, anti-photobleaching, long lifetime, and metal-centered NIR emission. In the past decade, scientists have contributed to the advancement of NIR metal complexes involving efforts to improve photophysical properties, biocompatibility, specificity, pharmacokinetics, in vivo visualization, and attempts to exploit new ligand platforms. Herein, we summarize recent progress and provide future perspectives for NIR metal complexes, including d-block transition metals and f-block lanthanides (Ln) as NIR optical molecular probes for bioassays.

How the Way a Naphthalimide Unit is Implemented Affects the Photophysical and -catalytic Properties of Cu(I) Photosensitizers

Driven by the great potential of solar energy conversion this study comprises the evaluation and comparison of two different design approaches for the improvement of copper based photosensitizers. In particular, the distinction between the effects of a covalently linked and a directly fused naphthalimide unit was assessed. For this purpose, the two heteroleptic Cu(I) complexes CuNIphen (NIphen = 5-(1,8-naphthalimide)-1,10-phenanthroline) and Cubiipo (biipo = 16H-benzo-[4′,5′]-isoquinolino-[2′,1′,:1,2]-imidazo-[4,5-f]-[1,10]-phenanthroline-16-one) were prepared and compared with the novel unsubstituted reference compound Cuphen (phen = 1,10-phenanthroline). Beside a comprehensive structural characterization, including two-dimensional nuclear magnetic resonance spectroscopy and X-ray analysis, a combination of electrochemistry, steady-state and time-resolved spectroscopy was used to determine the electrochemical and photophysical properties in detail. The nature of the excited states was further examined by (time-dependent) density functional theory (TD-DFT) calculations. It was found that CuNIphen exhibits a greatly enhanced absorption in the visible and a strong dependency of the excited state lifetimes on the chosen solvent. For example, the lifetime of CuNIphen extends from 0.37 µs in CH2Cl2 to 19.24 µs in MeCN, while it decreases from 128.39 to 2.6 µs in Cubiipo. Furthermore, CuNIphen has an exceptional photostability, allowing for an efficient and repetitive production of singlet oxygen with quantum yields of about 32%.

Tuning the photodynamics of sub-nanometer neutral chromium oxide clusters through sequential oxidation

Sub-nanometer neutral chromium oxide clusters were produced in the gas phase through laser ablation and their low-lying excited state lifetimes were measured using femtosecond pump-probe spectroscopy. Time-dependent density functional theory calculations relate the trends in experimental lifetimes to the cluster's electronic structure. The photoexcited (CrO₂)_n (n < 5) cluster transients with the absence of up to four O atoms (Cr_nO_2n-x, x < 5) exhibit a ∼30 fs and sub-ps lifetime, attributed to instantaneous metallic e-e scattering and vibrationally mediated charge carrier relaxation, respectively. A long-lived (>2 ps) response is found in both small and clusters with low O content, indicating that terminal CrO bonds facilitate efficient excited state relaxation. The ∼30 fs transient signal fraction grows nearly linearly with oxidation, matching the amount of O-2p to Cr-3d charge transfer character of the photoexcitation and suggesting a gradual transition between semiconducting and metallic behavior in chromium oxide clusters at the molecular level. The results presented herein suggest that the photocatalytic properties of chromium oxides can be tunable based on size and oxidation.

Long-lived, near-IR emission from Cr(III) under ambient conditions

Bis-terdentate (N^N^N) ligands coordinated to Cr(III) yield complexes that display near-IR emission under aerated solvent conditions at room temperature.

Molecular Rubies in Photoredox Catalysis

The molecular ruby [Cr(tpe) ₂ ] ³⁺ and the tris(bipyridine) chromium(III) complex [Cr(dmcbpy) ₃ ] ³⁺ as well as the tris(bipyrazine)ruthenium(II) complex [Ru(bpz) ₃ ] ²⁺ were employed in the visible light-induced radical cation [4+2] cycloaddition (tpe = 1,1,1-tris(pyrid-2-yl)ethane, dmcbpy = 4,4'-dimethoxycarbonyl-2,2'-bipyridine, bpz = 2,2'-bipyrazine), while [Cr(ddpd) ₂ ] ³⁺ serves as a control system (ddpd = N,N'-dimethyl-N,N'-dipyridin-2-ylpyridine-2,6-diamine). Along with an updated mechanistic proposal for the Cr^III driven catalytic cycle based on redox chemistry, Stern-Volmer analyses, UV/Vis/NIR spectroscopic and nanosecond laser flash photolysis studies, we demonstrate that the very weakly absorbing photocatalyst [Cr(tpe) ₂ ] ³⁺ outcompetes [Cr(dmcbpy) ₃ ] ³⁺ and even [Ru(bpz) ₃ ] ²⁺ in particular at low catalyst loadings, which appears contradictory at first sight. The high photostability, the reversible redoxchemistry and the very long excited state lifetime account for the exceptional performance and even reusability of [Cr(tpe) ₂ ] ³⁺ in this photoredox catalytic system.

Heteroleptic mer-[Cr(N∩N∩N)(CN)3] complexes: synthetic challenge, structural characterization and photophysical properties

The substitution of three water molecules around trivalent chromium in CrBr₃·6H₂O with the tridentate 2,2′:6′,2′′-terpyridine (tpy), N,N′-dimethyl-N,N′-di(pyridine-2-yl)pyridine-2,6-diamine (ddpd) or 2,6-di(quinolin-8-yl)pyridine (dqp) ligands gives the heteroleptic mer-[Cr(L)Br₃] complexes. Stepwise treatments with Ag(CF₃SO₃) and KCN under microwave irradiations provide mer-[Cr(L)(CN)₃] in moderate yields. According to their X-ray crystal structures, the associated six-coordinate meridional [CrN₃C₃] chromophores increasingly deviate from a pseudo-octahedral arrangement according to L = ddpd ≈ dpq ≪ tpy; a trend in line with the replacement of six-membered with five-membered chelate rings around Cr^III. Room-temperature ligand-centered UV-excitation at 18 170 cm⁻¹ (λ_exc = 350 nm), followed by energy transfer and intersystem crossing eventually yield microsecond metal-centered Cr(²E → ⁴A₂) phosphorescence in the red to near infrared domain 13 150–12 650 cm⁻¹ (760 ≤ λ_em ≤ 790 nm). Decreasing the temperature to liquid nitrogen (77 K) extends the emission lifetimes to reach the millisecond regime with a record of 4.02 ms for mer-[Cr(dqp)(CN)₃] in frozen acetonitrile.

The heteroleptic mer-[Cr(L)(CN)₃] (L = tpy, ddpd, dqp) complexes with their C_2v-symmetrical [CrC₃N₃] luminescent chromophores represent the missing links between pseudo-octahedral [CrN₆] and [CrC₆] units found in their well-known homoleptic parents.

Photochemical and Electrochemical Applications of Proton-Coupled Electron Transfer in Organic Synthesis

We present here a review of the photochemical and electrochemical applications of multi-site proton-coupled electron transfer (MS-PCET) in organic synthesis. MS-PCETs are redox mechanisms in which both an electron and a proton are exchanged together, often in a concerted elementary step. As such, MS-PCET can function as a non-classical mechanism for homolytic bond activation, providing opportunities to generate synthetically useful free radical intermediates directly from a wide variety of common organic functional groups. We present an introduction to MS-PCET and a practitioner's guide to reaction design, with an emphasis on the unique energetic and selectivity features that are characteristic of this reaction class. We then present chapters on oxidative N-H, O-H, S-H, and C-H bond homolysis methods, for the generation of the corresponding neutral radical species. Then, chapters for reductive PCET activations involving carbonyl, imine, other X═Y π-systems, and heteroarenes, where neutral ketyl, α-amino, and heteroarene-derived radicals can be generated. Finally, we present chapters on the applications of MS-PCET in asymmetric catalysis and in materials and device applications. Within each chapter, we subdivide by the functional group undergoing homolysis, and thereafter by the type of transformation being promoted. Methods published prior to the end of December 2020 are presented.

Photoactive Metal Carbonyl Complexes Bearing N-Heterocyclic Carbene Ligands: Synthesis, Characterization, and Viability as Photoredox Catalysts

This report details the synthesis and characterization of a small family of previously unreported, structurally related chromium, molybdenum, tungsten, manganese, and iron complexes bearing N-heterocyclic carbene and carbonyl supporting ligands. These complexes have the general form [ML(CO)₃X] or [ML(CO)₃], where X = CO or Br and L = 1-phenyl-3-(2-pyridyl)imidazolin-2-ylidene. Where possible, the solid-state, spectroscopic, electrochemical, and photophysical properties of these molecules were studied using a combination of experiment and theory. Photophysical studies reveal that decarbonylation occurs when these complexes are exposed to ultraviolet light, with the CO ligand being replaced with a labile acetonitrile solvent molecule. To obtain insights into the potential utility, scope, and applications of these complexes in visible-light-mediated photoredox catalysis, their capacity to facilitate a range of photoinduced reactions via the reductive or oxidative functionalization of organic molecules was investigated. These chromium, molybdenum, and manganese catalysts efficiently facilitated atom-transfer radical addition processes. In light of their photolability, these types of catalysts may potentially allow for the development of photoinduced reactions involving less conventional inner-sphere electron-transfer pathways.

Near-Infrared Phosphorescent Hybrid Organic-Inorganic Perovskite with High-Contrast Dielectric and Third-Order Nonlinear Optical Switching Functionalities

Hybrid organic-inorganic perovskites providing integrated functionalities for multimodal switching applications are widely sought-after materials for optoelectronics. Here, we embark on a study of a novel pyrrolidinium-based cyanide perovskite of formula (C4H10N)2KCr(CN)6, which displays thermally driven bimodal switching characteristics associated with an order-disorder phase transition. Dielectric switching combines two features important from an application standpoint: high permittivity contrast (Δε' = 38.5) and very low dielectric losses. Third-order nonlinear optical switching takes advantage of third-harmonic generation (THG) bistability, thus far unprecedented for perovskites and coordination polymers. Structurally, (C4H10N)2KCr(CN)6 stands out as the first example of a three-dimensional stable perovskite among formate-, azide-, and cyanide-based metal-organic frameworks comprising large pyrrolidinium cations. Its stability, reflected also in robust switching characteristics, has been tracked down to the Cr3+ component, the ionic radius of which provides a large enough metal-cyanide cage for the pyrrolidinium cargo. While the presence of polar pyrrolidinium cations leads to excellent switchable dielectric properties, the presence of Cr3+ is also responsible for efficient phosphorescence, which is remarkably shifted to the near-infrared region (770 to 880 nm). The presence of Cr3+ was also found indispensable to the THG switching functionality. It is also found that a closely related cobalt-based analogue doped with Cr3+ ions displays distinct near-infrared phosphorescence as well. Thus, doping with Cr3+ ions is an effective strategy to introduce phosphorescence as an additional functional property into the family of cobalt-cyanide thermally switchable dielectrics.

An Imidazoacridine-Based TADF Material as Effective Organic Photosensitizer for Visible-Light-Promoted [2+2] Cycloaddition

Energy transfer (EnT) is a fundamental activation process in visible-light-promoted photocycloaddition reactions. This work describes the performance of imidazoacridine-based TADF materials for visible-light mediated triplet–triplet EnT photocatalysis. The TADF material ACR-IMAC has been discovered as an inexpensive, high-performance organic alternative to the commonly used metal-based photosensitizers for visible-light EnT photocatalysis. The efficiency of ACR-IMAC as a photosensitizer is comparable with Ir-based photosensitizers in both intra- and intermolecular [2 + 2] cycloadditions. ACR-IMAC mediated both dearomative and non-dearomative [2 + 2] cycloadditions in good yields, with high regio- and diastereocontrol. Cyclobutane-containing bi- tri- and tetracylic scaffolds were successfully prepared, with broad tolerance toward functional groups relevant to drug discovery campaigns. Fluorescence quenching experiments, time-correlated single-photon counting, and transient absorption spectroscopy were also conducted to provide insight into the reaction and evidence for an EnT mechanism.

This work describes the performance of imidazoacridine-based TADF materials for visible-light mediated triplet–triplet EnT photocatalysis.

Luminescent First-Row Transition Metal Complexes

Precious and rare elements have traditionally dominated inorganic photophysics and photochemistry, but now we are witnessing a paradigm shift toward cheaper and more abundant metals. Even though emissive complexes based on selected first-row transition metals have long been known, recent conceptual breakthroughs revealed that a much broader range of elements in different oxidation states are useable for this purpose. Coordination compounds of V, Cr, Mn, Fe, Co, Ni, and Cu now show electronically excited states with unexpected reactivity and photoluminescence behavior. Aside from providing a compact survey of the recent conceptual key advances in this dynamic field, our Perspective identifies the main design strategies that enabled the discovery of fundamentally new types of 3d-metal-based luminophores and photosensitizers operating in solution at room temperature.

A Near-Infrared-II Emissive Chromium(III) Complex

The combination of π-donating amido with π-accepting pyridine coordination units in a tridentate chelate ligand causes a strong nephelauxetic effect in a homoleptic CrIII complex, which shifts its luminescence to the NIR-II spectral range. Previously explored CrIII polypyridine complexes typically emit between 727 and 778 nm (in the red to NIR-I spectral region), and ligand design strategies have so far concentrated on optimizing the ligand field strength. The present work takes a fundamentally different approach and focusses on increasing metal-ligand bond covalence to shift the ruby-like 2 E emission of CrIII to 1067 nm at 77 K.

Adenine Radical Cation Formation by a Ligand-Centered Excited State of an Intercalated Chromium Polypyridyl Complex Leads to Enhanced DNA Photo-oxidation

Assessment of the DNA photo-oxidation and synthetic photocatalytic activity of chromium polypyridyl complexes is dominated by consideration of their long-lived metal-centered excited states. Here we report the participation of the excited states of [Cr(TMP)₂dppz]³⁺ (1) (TMP = 3,4,7,8-tetramethyl-1,10-phenanthroline; dppz = dipyrido[3,2-a:2′,3′-c]phenazine) in DNA photoreactions. The interactions of enantiomers of 1 with natural DNA or with oligodeoxynucleotides with varying AT content (0–100%) have been studied by steady state UV/visible absorption and luminescence spectroscopic methods, and the emission of 1 is found to be quenched in all systems. The time-resolved infrared (TRIR) and visible absorption spectra (TA) of 1 following excitation in the region between 350 to 400 nm reveal the presence of relatively long-lived dppz-centered states which eventually yield the emissive metal-centered state. The dppz-localized states are fully quenched when bound by GC base pairs and partially so in the presence of an AT base-pair system to generate purine radical cations. The sensitized formation of the adenine radical cation species (A^•+T) is identified by assigning the TRIR spectra with help of DFT calculations. In natural DNA and oligodeoxynucleotides containing a mixture of AT and GC of base pairs, the observed time-resolved spectra are consistent with eventual photo-oxidation occurring predominantly at guanine through hole migration between base pairs. The combined targeting of purines leads to enhanced photo-oxidation of guanine. These results show that DNA photo-oxidation by the intercalated 1, which locates the dppz in contact with the target purines, is dominated by the LC centered excited state. This work has implications for future phototherapeutics and photocatalysis.

Transient FTIR spectroscopy after one- and two-colour excitation on a highly luminescent chromium(III) complex

The development of photoactive transition metal complexes with Earth-abundant metals is a rapidly growing research field, where a deeper understanding of the underlying photophysical processes is of great importance. A multitude of potential applications in the fields of photosensitizing, optical sensing, photoluminescence and photoredox catalysis motivates demanding spectroscopic studies. We applied a series of high-level spectroscopic methods on the previously reported highly luminescent chromium(iii) complex [Cr(ddpd)2](BF4)3 (ddpd = N,N'-dimethyl-N,N'-dipyridine-2-ylpyridine-2,6-diamine) possessing two near-IR emissive doublet states with microsecond lifetimes. Luminescence measurements were performed at temperatures down to about 10 K, showing a remarkable rise of the integrated emission intensity by more than a factor of three. The emissive doublet states were structurally characterized by transient FTIR spectroscopy at 290 K and 20 K, supplemented by ground state FTIR and Raman spectroscopy in combination with density functional theory. According to emission and step-scan FT-IR spectroscopy, the stronger luminescence at lower temperature arises from decreased non-radiative decay via energy transfer to CH vibrational overtones and increased radiative decay based on lowered symmetry. Pump/pump/probe (FTIR) and pump/dump/probe (FTIR) schemes were developed to modulate the excited doublet state populations at 290 and 20 K as a function of specific near-IR pump vs. dump wavelengths. The effect of the second near-IR pulse can be explained by combinations of excited state absorption, ground state absorption and stimulated emission. The successful establishment of these two-colour step-scan FTIR experiments is an important step towards profound studies on further transition metal complexes with energetically close-lying excited states in the near future.

Beyond Chiral Organic (p-Block) Chromophores for Circularly Polarized Luminescence: The Success of d-Block and f-Block Chiral Complexes

Chiral molecules are essential for the development of advanced technological applications in spintronic and photonic. The best systems should produce large circularly polarized luminescence (CPL) as estimated by their dissymmetry factor (g _lum), which can reach the maximum values of -2 ≤ g _lum ≤ 2 when either pure right- or left-handed polarized light is emitted after standard excitation. For matching this requirement, theoretical considerations indicate that optical transitions with large magnetic and weak electric transition dipole moments represent the holy grail of CPL. Because of their detrimental strong and allowed electric dipole transitions, popular chiral emissive organic molecules display generally moderate dissymmetry factors (10^-5 ≤ g _lum ≤ 10^-3). However, recent efforts in this field show that g _lum can be significantly enhanced when the chiral organic activators are part of chiral supramolecular assemblies or of liquid crystalline materials. At the other extreme, chiral Eu^III- and Sm^III-based complexes, which possess intra-shell parity-forbidden electric but allowed magnetic dipole transitions, have yielded the largest dissymmetry factor reported so far with g _lum ~ 1.38. Consequently, 4f-based metal complexes with strong CPL are currently the best candidates for potential technological applications. They however suffer from the need for highly pure samples and from considerable production costs. In this context, chiral earth-abundant and cheap d-block metal complexes benefit from a renewed interest according that their CPL signal can be optimized despite the larger covalency displayed by d-block cations compared with 4f-block analogs. This essay thus aims at providing a minimum overview of the theoretical aspects rationalizing circularly polarized luminescence and their exploitation for the design of chiral emissive metal complexes with strong CPL. Beyond the corroboration that f-f transitions are ideal candidates for generating large dissymmetry factors, a special attention is focused on the recent attempts to use chiral Cr^III-based complexes that reach values of g _lum up to 0.2. This could pave the way for replacing high-cost rare earths with cheap transition metals for CPL applications.

Synthesis, Structures, and Photoluminescent Properties of Tricyanidonitridorhenium(V) Complexes with Bipyridine-Type Ligands

Tricyanidonitridorhenium(V) complexes with 2,2'-bipyridine (bpy) derivatives in which the 4 and 4' positions were substituted by X, [ReN(CN)₃(X₂bpy)]^- (X = NMe₂, NH₂, OMe, Me, Cl, and Br), were newly synthesized and characterized. The structures of the new complexes were determined by single-crystal X-ray analysis. UV-vis spectra of the complexes in dimethyl sulfoxide (DMSO) showed that the peak maximum wavelengths of rhenium-to-π* bpy-type-ligand charge transfer were in the range of 474-542 nm. Cyclic voltammograms in n-(C₄H₉)₄NPF₆-DMSO showed one-electron oxidation and reduction waves corresponding to the Re(VI/V) and X₂bpy^0/- processes, respectively. The new complexes and [ReN(CN)₃bpy]^- showed photoluminescence in the crystalline phase at 295 and 80 K and in DMSO at 295 K. The origin of the emission in DMSO was attributed to the triplet nature of the rhenium-to-π* bpy-type-ligand charge-transfer transition. Density functional theory calculations showed that the highest occupied and lowest unoccupied molecular orbitals were primarily localized on the d_xy orbital of the rhenium and π* orbitals of the bpy-type ligand, respectively.

Key Strategy for the Rational Incorporation of Long-Lived NIR Emissive Cr(III) Chromophores into Polymetallic Architectures

The Cr^IIIN₆ chromophores are particularly appealing for low-energy sensitization via energy transfer processes since they show extremely long excited state lifetimes reaching the millisecond range in the technologically crucial near-infrared domain. However, their properties were barely harnessed in multimetallic structures because of the lack of both monitoring methods and accessible synthetic pathways. We herein report a remedy to monitor and control the formation of Cr^III-containing assemblies in solution via the design of a Cr^IIIN₆ inert "complex-as-ligand" that can be included into polymetallic architectures. As a proof of concept, these CrN₆ building blocks were reacted in solution with Zn^II or Fe^II to give extended trinuclear linear Cr-M-Cr assemblies, the structure of which could be addressed by NMR spectroscopy despite the presence of two slowly relaxing Cr^III paramagnetic centers. In addition to long Cr^III excited state lifetimes and weak sensitivity to oxygen quenching, these polymetallic assemblies display controlled Cr^III to M^II energy transfers, which pave the way for use of the "complex-as-ligand" strategy for introducing photophysically active Cr^III probes into light-converting polymetallic devices.

Luminescent polypyridyl heteroleptic CrIII complexes with high quantum yields and long excited state lifetimes

Implementing high quantum yields and long-lived excited state lifetimes within heteroleptic luminescent CrIII complexes is a keystone for the design of supramolecular energy-converting devices exploiting this cheap metal. In this contribution, we discuss the stepwise and rational optimization of these two limiting factors within a series of heteroleptic CrIII complexes.

Quantifying Triplet State Formation in Zinc Dipyrrin Complexes

Photocatalysis is a promising method to harness solar energy and use it to form fuels and other high-value chemicals, but most sensitizers used in photocatalytic reactions are complexes of rare and expensive metals such as ruthenium and iridium. Zinc dipyrromethene complexes have potential to be a more earth-abundant alternative, but their photophysical properties are largely unexplored. In this study, triplet state formation was quantified in two zinc dipyrromethene complexes, with and without heavy atoms, by transient absorption spectroscopy. Without heavy atoms, the triplet quantum yield was 16% in toluene and 27% in THF. With the addition of heavy I atoms, the triplet quantum yield increased to 62-63% and was insensitive to solvent polarity. The fact that in the absence of heavy atoms the triplet yield is affected by solvent polarity and in the presence of heavy atoms it is not suggests that triplet formation occurs through different pathways in the two complexes. These triplet yields meet or exceed those of successful organic photosensitizers, illustrating the potential for zinc dipyrromethene complexes as photosensitizers.