A novel thermo-responsive supramolecular organogel based on dual acylhydrazone: fluorescent detection for Al3+ ions

Exploring the gelation and AIE properties of a tripodal acylhydrazone-based probe: turn-on Zn(II) sensing in HEPES buffer

Two C3-symmetric acylhydrazone-based AIE active probes, TRI-QUI and TRI-NAP, were synthesized with different peripheral substituents. The probe containing a quinoline moiety in the periphery displayed a selective turn-on response towards Zn2+ in HEPES buffer, with a calculated detection limit of 6.45 μM. The probe TRI-QUI was also identified as a supergelator as it formed a gel in DMSO-H2O (2 : 3, v/v) with a minimum gelation concentration of 0.5 mg mL-1. The gelator could interact with various metal ions or anions in the gel phase. Furthermore, the gelator could encapsulate small molecules like methyl orange and bromophenol blue, making the probe a multifunctional smart material.

Development of a novel self-healing Zn(II)-metallohydrogel with wide bandgap semiconducting properties for non-volatile memory device application

A rapid and effective strategy has been devised for the swift development of a Zn(II)-ion-based supramolecular metallohydrogel, termed Zn@PEH, using pentaethylenehexamine as a low molecular weight gelator. This process occurs in an aqueous medium at room temperature and atmospheric pressure. The mechanical strength of the synthesized Zn@PEH metallohydrogel has been assessed through rheological analysis, considering angular frequency and oscillator stress dependencies. Notably, the Zn@PEH metallohydrogel exhibits exceptional self-healing abilities and can bear substantial loads, which have been characterized through thixotropic analysis. Additionally, this metallohydrogel displays injectable properties. The structural arrangement resembling pebbles within the hierarchical network of the supramolecular Zn@PEH metallohydrogel has been explored using FESEM and TEM measurements. EDX elemental mapping has confirmed the primary chemical constituents of the metallohydrogel. The formation mechanism of the metallohydrogel has been analyzed via FT-IR spectroscopy. Furthermore, zinc(II) metallohydrogel (Zn@PEH)-based Schottky diode structure has been fabricated in a lateral metal-semiconductor-metal configuration and  it's charge transport behavior has also been studied. Notably, the zinc(II) metallohydrogel-based resistive random access memory (RRAM) device (Zn@PEH) demonstrates bipolar resistive switching behavior at room temperature. This RRAM device showcases remarkable switching endurance over 1000 consecutive cycles and a high ON/OFF ratio of approximately 270. Further, 2 × 2 crossbar array of the RRAM devices were designed to demonstrate OR and NOT logic circuit operations, which can be extended for performing higher order computing operations. These structures hold promise for applications in non-volatile memory design, neuromorphic and in-memory computing, flexible electronics, and optoelectronic devices due to their straightforward fabrication process, robust resistive switching behavior, and overall system stability.

Novel supramolecular luminescent metallogels containing Tb(iii) and Eu(iii) ions with benzene-1,3,5-tricarboxylic acid gelator: advancing semiconductor applications in microelectronic devices

A novel strategy was employed to create supramolecular metallogels incorporating Tb(iii) and Eu(iii) ions using benzene-1,3,5-tricarboxylic acid (TA) as a gelator in N,N-dimethylformamide (DMF). Rheological analysis demonstrated their mechanical robustness under varying stress levels and angular frequencies. FESEM imaging revealed a flake-like hierarchical network for Tb-TA and a rod-shaped architecture for Eu-TA. EDX analysis confirmed essential chemical constituents within the metallogels. FT-IR, PXRD, Raman spectroscopy, and thermogravimetric analysis assessed their gelation process and material properties, showing semiconducting characteristics, validated by optical band-gap measurements. Metal-semiconductor junction-based devices integrating Al metal with Tb(iii)- and Eu(iii)-metallogels exhibited non-linear charge transport akin to a Schottky diode, indicating potential for advanced electronic device development. Direct utilization of benzene-1,3,5-tricarboxylic acid and Tb(iii)/Eu(iii) sources underscores their suitability as semiconducting materials for device fabrication. This study explores the versatile applications of Tb-TA and Eu-TA metallogels, offering insights for material science researchers.

Exploration of a wide bandgap semiconducting supramolecular Mg(II)-metallohydrogel derived from an aliphatic amine: a robust resistive switching framework for brain-inspired computing

A rapid metallohydrogelation strategy has been developed of magnesium(II)-ion using trimethylamine as a low molecular weight gelator in water medium at room temperature. The mechanical property of the synthesized metallohydrogel material is established through the rheological analysis. The nano-rose like morphological patterns of Mg(II)-metallohydrogel are characterized through field emission scanning electron microscopic study. The energy dispersive X-ray elemental mapping analysis confirms the primary gel forming elements of Mg(II)-metallohydrogel. The possible metallohydrogel formation strategy has been analyzed through FT-IR spectroscopic study. In this work, magnesium(II) metallohydrogel (Mg@TMA) based metal-semiconductor-metal structures have been developed and charge transport behaviour is studied. Here, it is confirmed that the magnesium(II) metallohydrogel (Mg@TMA) based resistive random access memory (RRAM) device is showing bipolar resistive switching behaviour at room temperature. We have also explored the mechanism of resistive switching behaviour using the formation (rupture) of conductive filaments between the metal electrodes. This RRAM devices exhibit excellent switching endurance over 10,000 switching cycles with a large ON/OFF ratio (~ 100). The easy fabrication techniques, robust resistive switching behaviour and stability of the present system makes these structures preferred candidate for applications in non-volatile memory design, neuromorphic computing, flexible electronics and optoelectronics etc.

A 5-aminoisophthalic acid low molecular weight gelator based novel semiconducting supramolecular Zn(ii)-metallogel: unlocking an efficient Schottky barrier diode for microelectronics

A novel method has been successfully developed for creating supramolecular metallogels using zinc(ii) ions and 5-aminoisophthalic acid as the gelator (low molecular weight gelator) in a dimethylformamide (DMF) solvent at room temperature. Comprehensive rheological investigations confirm the robust mechanical strength of the resulting zinc(ii)-metallogel. Microstructural analysis conducted through field-emission scanning electron microscopy (FESEM) unveils a unique flake-like morphology, with energy-dispersive X-ray (EDX) elemental mapping confirming the prevalence of zinc as the primary constituent of the metallogel. To understand the formation mechanism of this metallogel, Fourier-transform infrared (FT-IR) spectroscopy was employed. Notably, these supramolecular zinc(ii)-metallogel assemblies exhibit electrical conductivity reminiscent of metal-semiconductor (MS) junction electronic components. Surprisingly, the metallogel-based thin film device showcases an impressive electrical conductivity of 1.34 × 10-5 S m-1. The semiconductor characteristics of the synthesized zinc(ii)-metallogel devices, including their Schottky barrier diode properties, have been extensively investigated. This multifaceted study opens up a promising avenue for designing functional materials tailored for electronic applications. It harnesses the synergistic properties of supramolecular metallogels and highlights their significant potential in the development of semiconductor devices. This work represents a novel approach to the creation of advanced materials with unique electronic properties, offering exciting prospects for future innovations in electronic and semiconductor technologies.

Two novel low molecular weight gelator-driven supramolecular metallogels efficient in antimicrobial activity applications

A remarkable ultrasonication technique was successfully employed to create two novel metallogels using citric acid as a low molecular weight gelator, in combination with cadmium(ii)-acetate and mercury(ii)-acetate dissolved in N,N-dimethyl formamide at room temperature and under ambient conditions. The mechanical properties of the resulting Cd(ii)- and Hg(ii)-metallogels were rigorously examined through rheological analyses, which revealed their robust mechanical stability under varying angular frequencies and shear strains. Detailed characterization of the chemical constituents within these metallogels was accomplished through EDX mapping experiments, while microstructural features were visualized using field emission scanning electron microscope (FESEM) images. Additionally, FT-IR spectroscopic analysis was employed to elucidate the metallogel formation mechanism. Significantly, the antimicrobial efficacy of these novel metallogels was assessed against a panel of bacteria, including Gram-positive strains such as Bacillus subtilis and Staphylococcus epidermidis, as well as Gram-negative species like Escherichia coli and Pseudomonas aeruginosa. The results demonstrated substantial antibacterial activity, highlighting the potential of Cd(ii) and Hg(ii)-based citric acid-mediated metallogels as effective agents against a broad spectrum of bacteria. In conclusion, this study provides a comprehensive exploration of the synthesis, characterization, and antimicrobial properties of Cd(ii) and Hg(ii)-based citric acid-mediated metallogels, shedding light on their promising applications in combating both Gram-positive and Gram-negative bacterial infections. These findings open up exciting prospects for the development of advanced materials with multifaceted industrial and biomedical uses.

A novel supramolecular Zn(ii)-metallogel: an efficient microelectronic semiconducting device application

A unique strategy for the synthesis of a supramolecular metallogel employing zinc ions and adipic acid in DMF medium has been established at room temperature. Rheological analysis was used to investigate the mechanical characteristics of the supramolecular Zn(ii)-metallogel. Field emission scanning electron microscopy and transmission electron microscopy were used to analyse the hexagonal shape morphological features of the Zn(ii)-metallogel. Interestingly, the electrical conductivity is observed in the electronic device with Zn(ii)-metallogel based metal-semiconductor (MS) junctions. All aspects of the metallogel's electrical properties were investigated. The electrical conductivity of the metallogel-based thin film device was 7.38 × 10-5 S m-1. The synthesised Zn(ii)-metallogel based device was investigated for its semi-conductive properties, such as its Schottky barrier diode nature.

Construction of Artificial Light-Harvesting Systems Based on Aggregation-Induced Emission Type Supramolecular Self-Assembly Metallogels

A method for preparing new artificial light-harvesting systems (ALHSs) based on supramolecular metallogels was proposed. Various metal ions were introduced into a solution of a bi-benzimidazole compound (P) in ethylene glycol, and P exhibited high selectivity toward Al3+, as indicated by the noticeable red shift (49 nm) observed in the fluorescence spectra of P after the addition of Al3+. Interestingly, the gelator, P, could self-assemble into a stable supramolecular gel (P-gel) that exhibits strong aggregation-induced emission in ethylene glycol. Thus, two ALHSs were successfully prepared in a gel environment. The P-Al3+ assembly acts as the donor in the ALHSs, while BODIPY 505/515 (BDP) and rhodamine 6G (Rh6G), which are loaded onto the P-Al3+ assembly, act as acceptors. In these two diverse systems, the occurrence of an energy transfer process is confirmed from the P-Al3+ assembly to BDP and Rh6G. The findings of this study will enable the design and fabrication of ALHSs.

Artificial light-harvesting systems based on supramolecular self-assembly multi-component metallogels

This paper proposes a strategy for fabricating new artificial light-harvesting systems (ALHSs) based on supramolecular multi-component metallogels. Al³⁺ was introduced into a solution of an acylhydrazone compound (L) in DMSO or DMF to form the L-Al³⁺ assembly. After adding Al³⁺ to the L solution, a noticeable blue shift appeared in the fluorescence spectra of L. Moreover, L could form a gel (L-B-gel) with 1,3:2,4-dibenzylidene sorbitol (B) in a DMSO-H₂O binary solution. Finally, we obtained a multi-component metallogel (L-Al³⁺-B-gel) and successfully fabricated two ALHSs (L-Al³⁺/rhodamine 6G (Rh6G) and L-Al³⁺/rhodamine B (RhB)). In these systems, the L-Al³⁺ supramolecular assembly acts as the donor, while Rh6G and RhB act as acceptors. Additionally, we confirmed an energy-transfer process from the L-Al³⁺ component to Rh6G and RhB separately. The proposed fabrication strategy will facilitate the development of ALHSs.

A multistimulus-responsive self-healable supramolecular copper(ii)-metallogel derived from l-(+) tartaric acid: an efficient Schottky barrier diode

A low molecular weight gelator l-(+) tartaric acid- based self-healing supramolecular Cu(ii)-metallogel offers an electronic device of Schottky barrier diode at room temperature.

Reversible coordination-induced spin state switching in a nickel(ii) complex via a crystal-to-crystal transformation

An unprecedented CISSS behavior driven by a single-crystal-to-single-crystal (SCSC) process is found in a dinuclear nickel(ii) complex, which provides a new strategy for developing external-stimuli molecular magnetic materials.

Construction of a hydroxide responsive C3-symmetric supramolecular gel for controlled release of small molecules

A C3-symmetric acylhydrazone-based low molecular weight gelator (BHTP) bearing three pyridine units was synthesized and it was found to form a stable supramolecular gel in the mixture solvent of DMSO-H2O. The morphology of the gel as observed by FE-SEM showed a dense sheet structure. Hydrogen bonding and π-π stacking between the gelators were determined as the non-covalent interactions for the gelation, which were investigated thoroughly using XRD, UV-Vis, 1H NMR and FT-IR instruments. BHTP could form pH tolerant supramolecular gels in the widest range of pH values from 1 to 11. The DMSO-H2O (v : v = 1 : 1) gel exhibited selective response to OH- over a series of other anions through the color change from a white gel to a yellow solution, and the OH- response mechanism was proved by 1H NMR experiments. In solution, the lowest detection limit of BHTP for OH- was calculated to be as low as 1.62 × 10-7 M via UV-Vis titration experiments. Finally, encapsulation and controlled release of small molecules such as rhodamine B, crystal violet and methyl orange have been successfully carried out, demonstrating the potential for drug delivery application of this C3-symmetric supramolecular gel. This work opens a novel avenue for the preparation of supramolecular gel-based multiple functional smart materials.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Intelligent writable material based on a supramolecular self-assembly gel

A simple dual acylhydrazone-functionalized gelator (G1) has been designed and synthesized, and it was found to form a supramolecular organogel (G1-gel) in a mixed solvent of DMF-H2O. The gelator solution shows brilliant blue light upon mixing with Mg2+; this blue light can be erased by saliva or CO32-. Owing to this characteristic, a smart erasable writable material was prepared.

Reversibly Softening and Stiffening Organogels Using a Wavelength-Controlled Disulfide-Diselenide Exchange

Wavelength-dependent light-responsive seleno-sulfide dynamic covalent bonds were used to prepare organogels with reversible changes in stiffness. The disulfide cross-link organogels prepared from norbornene-terminated poly(ethylene glycol) (PEG-diNB) and poly(2-hydroxypropyl methacrylate-stat-mercaptoethyl acrylate) (PEG-diNB-poly(HPMA-stat-MEMA)) polymers underwent exchange reactions with 5,5'-diselenide-bis(2-aminobenzoic acid) upon irradiation with UV light. Following irradiation with visible light, the seleno-sulfide bonds were cleaved, reforming disulfide cross-links and the 5,5'-diselenide-bis(2-aminobenzoic acid). Reduction in G' with disulfide-diselenide exchange was consistent with that observed following a thiol-disulfide exchange reaction. Recovery of G' upon disulfide bond formation was 85-95% of the initial value in the as-prepared gel over five cycles of bond cleaving and reformation. This initial study shows the potential of the wavelength-controlled disulfide-diselenide chemistry to develop light-responsive reversible organogels. These organogels have the potential to be used in functional materials such as polymeric actuators or biomimetic soft robotics.

A C3-symmetrical tripodal acylhydrazone organogelator for the selective recognition of cyanide ions in the gel and solution phases: practical applications in food samples

The method of formation of low-molecular-weight organogelators via modifications in the substituents has been demonstrated. The organogelator formed can selectively sense cyanide ions in the gel and solution phases. Interaction of cyanide with acylhydrazone was noticeably visible to the "naked eye" and was proved using 1H NMR titrations. Notably, the ligand has been successfully explored for the recognition of cyanide ions in food samples. Additionally, low-cost cotton swabs coated with the organogelator showed rapid, on-site recognition of cyanide ions. The structure-property relationship discovered in the given study provides insight into the development of novel, cost-effective multifunctional materials.

Tunable Metallogels Based on Bifunctional Ligands: Precursor Metallogels, Spinel Oxides, Dye and CO2 Adsorption

A semisolid gel material is a gift of serendipity via various chemical interactions, and metal incorporation (metallogels) imparts diverse functional properties. In this work, we have synthesized four metallogels from tetrapodal and hexapodal carboxylic acid/amide-based low-molecular-weight gelators with Ni(II) and Cu(II) salts. These metallogels can be tuned to be a low-temperature precursor of porous spinel oxides. These xerogels exhibit impressive water soluble dye and carbon dioxide adsorption, which coupled with the tunability and facile synthesis of porous spinel oxides underscores their potential in environmental remediation and energy applications.

Controlled Sol-Gel and Diversiform Nanostructure Transitions by Photoresponsive Molecular Switching of Tetraphenylethene- and Azobenzene-Functionalized Organogelators

The implementation of stimuli-responsive materials with dynamically controllable features has long been an important objective that challenges chemists in the materials science field. We report here the synthesis and characterization of [2]rotaxanes (R1 and R1-b) with a molecular shuttle and photoresponsive properties. Axles T1 and T1-b were found to be highly efficient and versatile organogelators toward various nonpolar organic solvents, especially p-xylene, with critical gelation concentrations as low as 0.67 and 0.38 w/v %, respectively. The two molecular stations of switchable [2]rotaxanes (R1 and R1-b) can be revealed or concealed by t-butylcalix[4]arene macrocycle, thus inhibiting the gelation processes of the respective axles T1 and T1-b through the control of intermolecular hydrogen-bonding interactions. The sol-gel transition of axles T1 and T1-b could be achieved by the irradiation of UV-visible light, which interconverted between the extended and contracted forms. Interestingly, the morphologies of organogels in p-xylene, including flakes, nanobelts, fibers, and vesicles depending on the molecular structures of axles T1 and T1-b, were induced by UV-visible light irradiation. Further studies revealed that acid-base-controllable and reversible self-assembled nanostructures of these axle molecules were mainly constructed by the interplay of multi-noncovalent interactions, such as intermolecular π-π stacking, CH-π, and intermolecular hydrogen-bonding interactions. Surprisingly, our TPE molecular systems (R1, R1-b, T1, and T1-b) are nonemissive in their aggregated states, suggesting that not only fluorescence resonance energy transfer but also aggregation-caused quenching may have been functioning. Finally, the mechanical strength of these organogels in various solvents was monitored by rheological experiments.

Recent advances in soft functional materials: preparation, functions and applications

Synthetic materials and biomaterials with elastic moduli lower than 10 MPa are generally considered as soft materials. Research studies on soft materials have been boosted due to their intriguing features such as light-weight, low modulus, stretchability, and a diverse range of functions including sensing, actuating, insulating and transporting. They are ideal materials for applications in smart textiles, flexible devices and wearable electronics. On the other hand, benefiting from the advances in materials science and chemistry, novel soft materials with tailored properties and functions could be prepared to fulfil the specific requirements. In this review, the current progress of soft materials, ranging from materials design, preparation and application are critically summarized based on three categories, namely gels, foams and elastomers. The chemical, physical and electrical properties and the applications are elaborated. This review aims to provide a comprehensive overview of soft materials to researchers in different disciplines.

Gel Formed by Self-Assembly of a Urea-Modified Monopyrrolotetrathiafulvalene Derivative Displays Multi-Stimuli Responsiveness and Absorption of Rhodamine B

A new monopyrrolotetrathiafulvalene-based derivative containing a urea group was designed, synthesized and thoroughly characterized. It proved to be a non-gelator in a single solvent even when heated or sonicated. However, it could self-assemble in a CHCl₃ (CH₂ Cl₂ )/n-hexane mixture to form a thermo-responsive supramolecular organogel. SEM, FT-IR spectroscopy, UV/Vis absorption spectroscopy, and SAXS revealed that in the organogel system, the gelators self-assembled into supramolecular networks with a J-type aggregation mode under the joint effect of π-π stacking, intermolecular hydrogen-bonding, and van der Waals forces. Interestingly, the gel phase was shown to undergo reversible gel-sol transformation induced by Fe³⁺ -Vitamin C (Vc), trifluoroacetic acid-triethylamine (TFA-TEA) and picric acid (PA)-NaOH. In particular, in the presence of picric acid, the experimental results proposed that charge transfer occurred from the electron-donor gelator to the electron-acceptor picric acid due to the possibility of complex formation. Furthermore, the formed organogel could behave as the matrix for encapsulating cationic fluorescent dye from wastewater, and the adsorption efficiency was directly proportional to the concentration of the gelator.

A highly selective fluorescent probe for Al3+ based on bis(2-hydroxy-1-naphthaldehyde) oxaloyldihydrazone with aggregation-induced emission enhancement and gel properties

An efficient fluorescent probe, bis(2-hydroxy-1-naphthaldehyde) oxaloyldihydrazone (1), has been prepared for the selective sensing of Al³⁺ over other common metal ions in water-containing media. The 1:1 stoichiometry of 1 and Al³⁺ was determined from Job's plot and Benesti-Hildebrand plot. The binding constant was observed as 1.6×10⁵M^-1, and the limit of detection was found to be 0.36μM, which was far below the drinking water restriction of Al³⁺ by EPA (the maximum allowable value is 7.4μM). In addition, the inherent AIEE features of 1 were observed upon addition of water to DMSO solution due to the restriction of the intramolecular motion, which makes the molecular conformations rigid and planar. Moreover, 1 could act as a novel gelator to form thermo-reversible supramolecular organogel with significant green emission in DMSO-H₂O (v/v, 9:1) solution.

Metallogels: Availability, Applicability, and Advanceability

Introducing metal components into gel matrices provides an effective strategy to develop soft materials with advantageous properties such as: optical activity, conductivity, magnetic response activity, self-healing activity, catalytic activity, etc. In this context, a thorough overview of application-oriented metallogels is provided. Considering that many well-established metallogels start from serendipitous discoveries, insights into the structure-gelation relationship will offer a profound impact on the development of metallogels. Initially, design strategies for discovering new metallogels are discussed, then the advanced applications of metallogels are summarized. Finally, perspectives regarding the design of metallogels, the potential applications of metallogels and their derivative materials are briefly proposed.

Stability, Stimuli-Responsiveness, and Versatile Sorption Properties of a Dynamic Covalent Acylhydrazone Gel

Gel adsorbents are promising for pollutant removal from the wastewater. Herein, an acylhydrazone gel is developed from acylhydrazide-terminated pentaerythritol (PAT) and 2,4,6-triformylphloroglucinol (TFP) based on dynamic covalent acylhydrazone chemistry. PAT-TFP gel is stable under various conditions, while it shows reversible Cu2+ adsorption and desorption. PAT-TFP gel is studied as a versatile adsorbent for the capture of a range of (bulky) organic contaminants and heavy metal ions from aqueous solutions. Fast and good adsorption capacities are achieved for various dyes (rhodamine B and methyl orange), amines (aniline, p-chloroaniline, 4-methylaniline, and p-aminobenzoic acid), phenols (phenol, 1-naphthol, p-methylphenol, and bisphenol A), and metal ions (Cu2+, Cr3+, and Hg2+). The maximum adsorption capacity is 107.5 mg g-1 for Cu2+ and the equilibrium adsorption time is 30 min. PAT-TFP gel can be regenerated efficiently and used repeatedly.

Emissive intelligent supramolecular gel for highly selective sensing of Al3+ and writable soft material

A fluorine-containing acylhydrazone was newly designed and found to form gels in a mixed solvent of DMSO-ethylene glycol. The gelator could show brilliant blue light upon mixing with Al3+, which could be erased by F- ions and thus forming an erasable gel.

Ratiometric red-emission fluorescence detection of Al3+ in pure aqueous solution and live cells by a fluorescent peptidyl probe using aggregation-induced emission

The development of a fluorescence method for the selective ratiometric detection of Al3+ ions in pure aqueous solutions and live cells is still a significant challenge. In the present study, we synthesized a new type of fluorescent probe using an Al3+-triggered self-assembly based on the dipeptide receptor and an aggregation-induced emission fluorophore. The fluorescent probe (1) bearing cyanostilbene with excitation by visible light detected Al3+ ions sensitively in pure aqueous buffered solution by ratiometric red-emission at 600 nm. 1 provided a highly selective ratiometric detection of Al3+ among 16 metal ions in aqueous solution. 1 exhibited sensitive ratiometric response to Al3+ in aqueous buffered solutions at pH ranging from 5 to 7.4. The detection limit (145 nM, R2 = 0.999) for Al3+ ions in pure aqueous solution was much lower than the maximum allowable level of Al3+ in drinking water demanded by the Environmental Protection Agency (EPA). The probe provided an efficient approach to detect low concentrations of Al3+ in ground water, tap water, and live cells by ratiometric red-emissions at 600 nm. The binding study using dynamic light scattering, NMR, IR, and TEM revealed that the complex between 1 and Al3+ self-assembled to form nanoparticles, resulting in the enhancement of the emission at 600 nm and a concomitant decrease in the emission at 535 nm.

A novel pillar[5]arene-based supramolecular organic framework gel to achieve an ultrasensitive response by introducing the competition of cationπ and ππ interactions

Ultrasensitive response properties are an intriguing concern for stimuli-responsive materials. Herein, we report a novel method to achieve an ultrasensitive response by introducing the competition of cationπ and ππ interactions into a pillar[5]arene-based supramolecular organic framework (SOF-AMP). SOF-AMP was constructed with a novel bis-naphthalimide functionalized pillar[5]arene, which was able to form a stable supramolecular gel (SOF-AMP-G) in cyclohexanol. Interestingly, SOF-AMP-G shows an ultrasensitive response to Fe3+ through the competition of cationπ and ππ interactions. Meanwhile, the Fe3+ coordinated SOF (MSOF-Fe) shows an ultrasensitive response to H2PO4-. SOF-AMP-G displayed yellow fluorescence whereas, after the addition of 0.5 equiv. of Fe3+ to SOF-AMP-G, the yellow fluorescence was quenched. The detection limit of SOF-AMP-G for Fe3+ is 7.54 × 10-9 M. More interestingly, the Fe3+ coordinated SOF gel (MSOF-Fe-G) could sense H2PO4- with a fluorescence "turn-on". The detection limit of MSOF-Fe-G for H2PO4- is 4.21 × 10-9 M. Simultaneously, the Fe3+ and H2PO4- responsive thin films based on these SOF gels were prepared. Moreover, these SOF gels could be used as ultrasensitive ion sensors, fluorescent display materials and sensitive logic gates.

Photoirradiation-generated radicals in two-component supramolecular gel for polymerization

While supramolecular gels have been attracting great interest due to their easy design and fabrication, development of new applications based on these gels is always a challenging topic. Here, we report a two-component supramolecular gel that can generate and stabilize radicals through photo-irradiation, which can be subsequently used for polymerization. It has been found that the electrostatic interactions between a cationic amphiphile and anionic sulfonate could afford co-assembly into a two-component supramolecular gel. Upon photo-irradiation, the gel changed colour and produced the radicals, as verified from the EPR measurements. The radical thus formed in the supramolecular gel is relatively stable and could be used to polymerize acrylic acid directly without deoxygenation. In contrast, acrylic acid could not be polymerized in solution under the same conditions. This work expands the application scope of supramolecular gels.

A supramolecular Cd(ii)-metallogel: an efficient semiconductive electronic device

A supramolecular Cd(ii)-metallogel with oxalic acid in DMF medium has been achieved, and the semi-conductive characteristics such as the Schottky barrier diode nature of the metallogel were explored.