A turn-on anthraquinone-derived colorimetric and fluorometric dual-mode probe for highly selective Hg2+ determination and bioimaging in living organisms

Mercury ion (Hg2+) is considered a harmful neurotoxin, and real-time monitoring of Hg2+ concentrations in environmental and biological samples is critical. Fluorescent probes are a rapidly emerging visualization tool owing to their simple design and good selectivity. Herein, a novel fluorescence (FL) probe 2-(4-((6-((quinolin-8-yloxy)methyl)pyridin-2-yl)methyl)piperazin-1-yl)anthracene-9,10-dione (QPPA) is designed using piperazine as a linker between the anthraquinone group, which serves as a fluorophore, and N4O as the Hg2+ ligand. The probe exhibits FL "turn-on" sensing of Hg2+ because the complex inhibits the photo-induced electron transfer (PET) process. Moreover, QPPA can overcome the invasion by other possible cations, resulting in a clear color change from orange to colorless with the addition Hg2+. The chelation of QPPA with Hg2+ in a 1:1 ratio. Subsequently, the theoretically determined binding sites of the ligand to Hg2+ are validated through 1H NMR titration. The in situQPPA-Hg2+ complex can be subjected to Hg2+ extraction following the introduction of S2- owing to its robust binding capacity. The exceptional limit of detection values for Hg2+ and S2- are obtained as 63.0 and 79.1 nM (S/N = 3), respectively. Moreover, QPPA can display bright red FL in the presence of Hg2+ in different biological specimens such as HeLa cells, zebrafish, onion root tip tissues, and water flea Daphnia carinata, further providing an effective strategy for environmental monitoring and bioimaging of Hg2+ in living organisms.

Anthraquinones-based photocatalysis: A comprehensive review

In recent years, there has been significant interest in photocatalytic technologies utilizing semiconductors and photosensitizers responsive to solar light, owing to their potential for energy and environmental applications. Current efforts are focused on enhancing existing photocatalysts and developing new ones tailored for environmental uses. Anthraquinones (AQs) serve as redox-active electron transfer mediators and photochemically active organic photosensitizers, effectively addressing common issues such as low light utilization and carrier separation efficiency found in conventional semiconductors. AQs offer advantages such as abundant raw materials, controlled preparation, excellent electron transfer capabilities, and photosensitivity, with applications spanning the energy, medical, and environmental sectors. Despite their utility, comprehensive reviews on AQs-based photocatalytic systems in environmental contexts are lacking. In this review, we thoroughly describe the photochemical properties of AQs and their potential applications in photocatalysis, particularly in addressing key environmental challenges like clean energy production, antibacterial action, and pollutant degradation. However, AQs face limitations in practical photocatalytic applications due to their low electrical conductivity and solubility-related secondary contamination. To mitigate these issues, the design and synthesis of graphene-immobilized AQs are highlighted as a solution to enhance practical photocatalytic applications. Additionally, future research directions are proposed to deepen the understanding of AQs' theoretical mechanisms and to provide practical applications for wastewater treatment. This review aims to facilitate mechanistic studies and practical applications of AQs-based photocatalytic technologies and to improve understanding of these technologies.

Folic acid capping Bi3+-doped Ag quantum dots for enzyme-like dual-mode recognition of toxic S2- and visual sensing of NO2. Anal Chim Acta 2024;1319:342963. [PMID: 39122276 DOI: 10.1016/j.aca.2024.342963] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

BACKGROUND

NO2- and S2- are two kinds of common toxic anions widely distributed in environmental water, soil and food products. Human beings have suffered a lot of diseases from intake of excessive NO2- or S2-, i.e., infantile methemoglobin, cancer and even to death. Although tremendous efforts have been afforded to monitor NO2- and S2-, most were high instrument-depended with complex processing procedures. To keep food safety and to protect human health, it will be a huge challenge to develop a convenient and efficient way to monitor S2- and NO2- in practice.

RESULTS

A kind of folic acid capping Bi3+-doped Ag quantum dots (FA@Bi3+-Ag QDs) was developed for the first time by one-pot homogeneous reduced self-assembly. Not only did FA@Bi3+-Ag QDs possess intrinsic fluorescent property, it expressed synergistic peroxidase-like activity to catalyze the redox of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2 with Km/vmax of 0.087 mM/6.61 × 10-8 M s-1 and 6.42 mM/6.25 × 10-7 M s-1 respectively. Interestingly, trace S2- could exclusively alter its fluorescent property and peroxidase-like activity, exhibiting significant hypochromic and "turn-on" fluorescent effects. While trace NO2- could make FA@Bi3+-Ag QDs-TMB-H2O2 system hyperchromic. Under the optimized conditions, FA@Bi3+-Ag QDs were applied for dual-mode recognition of S2- and visual sensing of NO2- in real food samples with satisfactory recoveries, i.e., 100.7-107.9 %/95.8-104.7 % and 97.2-104.8 % respectively. The synergistic enzyme-mimic mechanism of FA@Bi3+-Ag QDs and its selective response mechanisms to S2- and NO2- were also proposed.

SIGNIFICANCE

This represents the first nanozyme-based FA@Bi3+-Ag QDs system for dual-mode recognition of S2- and visual sensing of NO2-, well meeting the basic requirement in drinking water set by WHO. It will offer a promising way for multi-mode monitoring of different pollution using the same nanozyme-based sensor.

Tuning sensing efficacy of anthraimidazoledione-based charge transfer dyes: nitro group positioning impact

Anthraimidazoledione-based optical sensors have been designed by varying the position of the nitro functional group. All three positional isomers showed highly colored, photostable optical signals owing to intramolecular charge transfer interactions. Despite having the same anion-binding site (imidazole unit), the selectivity and sensitivity of the compounds depend on the positioning of the nitro group. The selectivity was fairly good for the meta isomer, followed by the ortho and para isomers, respectively. In contrast, the sensitivity towards anions followed a completely opposite trend, with the para isomer being the most sensitive one towards anions. Interestingly, the color changing response along the turn-on fluorescence signal was observed only with CN- ions in a semi-aqueous environment. Though the introduction of water as a co-solvent could improve the selectivity, the sensitivity was found to be slightly less than that observed in pure organic medium. Mechanistic studies indicated hydrogen bonding interactions between the imidazole -NH proton and cyanide, which further facilitated the extent of intramolecular charge transfer.

Architecture of Easy-to-Synthesize and Superior Probe Based on Aminoquinoline Appended Naphthoquinone: Instant and On-Site Cu2+ Ion Quantification in Real Samples and Unusual Crystal Structure and Logic Gate Operations

Easy-to-synthesize aminoquinoline (AQ) appended naphthoquinone (NQ)-based colorimetric and ratiometric probe (AQNQ) was successfully synthesized in one step with high yield and low cost, and was utilized to supply an effective solution to critical shortcomings encountered in Cu2+ analysis. The structure of AQNQ and its interaction with Cu2+ forming an unusual AQNQ-Cu complex were enlightened with single-crystal X-ray diffraction analysis and different spectroscopic methods. AQNQ-Cu complex is the first Cu2+ containing dinuclear crystal where the octahedral coordination sphere is fulfilled through the coordination of a NQ oxygen atom. AQNQ exhibited long-term stability (more than 1 month), superior probe ability toward Cu2+ with quite fast response (30 s), high selectivity among many ions, and limit of detection of 12.13 ppb that is significantly below the highest amount of Cu2+ allowed in drinking water established by both WHO and EPA. Ratiometric determination of Cu2+ using AQNQ was performed with high recovery and low RSD values for drinking water, tap water, lake water, cherry, and watermelon samples. Colorimetric on-site determination including smartphone and paper strip applications, IMPLICATION, and INHIBIT logic gate applications were successfully carried out. The reversibility and reusability of the response to Cu2+ ions with the paper strip application were examined for the first time.

Aggregation-induced Emission Active Naphthalimide Derived Schiff Base for Detecting Cu2+ and Its Applications

Herein, an aggregation-induced emission (AIE) active Schiff base (NHS) was synthesized by condensing naphthalimide hydrazide with salicylaldehyde. The non-fluorescent solution of NHS in DMSO turned to emissive NHS upon increasing the HEPES fraction in DMSO from 70 to 95%. The UV-Vis absorption and DLS studies supported the self-aggregation of NHS that restricted the intramolecular rotation and activated the ESIPT process. The blue fluorescence of AIE luminogen NHS in DMSO:HEPES (5:95, v/v, pH = 7.4) was examined by adding different metal ions (Al3+, Ca2+, Cd2+, Co2+, Cu2+, Cr2+, Fe2+, Fe3+, Hg2+, Mg2+, Mn2+, Ni2+, Pb2+ and Zn2+). NHS showed a selective fluorescence switch-off response for Cu2+ due to the chelation enhancement quenching effect (CHEQ). The quenching of NHS by Cu2+ was explored by using density functional theory (DFT) and Stern-Volmer plot. The practical utility of NHS was examined by quantitative and qualitative analysis of Cu2+ in real water samples.

Aryl-Phenanthro[9,10-d]imidazole: A Versatile Scaffold for the Design of Optical-Based Sensors

Fluorescent and colorimetric sensors are important tools for investigating the chemical compositions of different matrices, including foods, environmental samples, and water. The high sensitivity, low interference, and low detection limits of these sensors have inspired scientists to investigate this class of sensing molecules for ion and molecule detection. Several examples of fluorescent and colorimetric sensors have been described in the literature; this Review focuses particularly on phenanthro[9,10-d]imidazoles. Different strategies have been developed for obtaining phenanthro[9,10-d]imidazoles, which enable modification of their optical properties upon interaction with specific analytes. These sensing responses usually involve changes in the fluorescence intensity and/or color arising from processes like photoinduced electron transfer, intramolecular charge transfer, intramolecular proton transfer in the excited state, and Förster resonance energy transfer. In this Review, we categorized these sensors into two different groups: those bearing formyl groups and their derivatives and those based on other molecular groups. The different optical responses of phenanthro[9,10-d]imidazole-based sensors upon interaction with specific analytes are discussed.

Click Chemistry Inspired Synthesis of Hydroxyanthracene Triazolyl Glycoconjugates

Novel hydroxyanthracene-based terminal alkynes 3 and 5a/b were synthesized by the acetylide addition reaction at the 9,10-position of anthraquinone 1 under mild conditions. The developed alkynes 3, 5a, and 5b on Huisgen azide-alkyne cycloaddition reaction with azido-sugars 6 in the presence of Cu(I) catalyst provided a series of triazole fasten hydroxyanthracene glycoconjugates 7, 8, and 9, respectively, in good yields. The representative compounds 9 and 7h were successfully deprotected under room-temperature conditions to liberate the corresponding free glycoconjugates 10 and 11, respectively. Further, structures of a few compounds were unmaliciously evidenced by their single-crystal X-ray.

An innovative study on the "on-off-on" detection of sulfur ions based on a TSPP-riboflavin fluorescent probe

In this paper, 5,10,15,20-(4-sulphonatophenyl) porphyrin (TSPP) was synthesized by a facile route and used as a fluorescent probe to construct a sensor system based on the high water solubility and high quantum yield. It was found that when riboflavin (RF) was introduced into the TSPP solution, the fluorescence intensity of TSPP decreased for the peaks at 645 nm and 700 nm based on the principle of the electrostatic attractions and hydrophobic interactions between TSPP and riboflavin. When the fluorescence emission peak of riboflavin appeared at 550 nm, the fluorescence sensor system changed from the "on" state to the "off" state. When sulfur ions (S2-) were further introduced into the TSPP-riboflavin system, the fluorescence intensity of riboflavin was further decreased based on the specific reaction between S2- and riboflavin. However, the fluorescence signal of TSPP was restored and the fluorescence sensing system changed from the "off" state to the "on" state. Therefore, TSPP was used as a fluorescent probe to construct an "on-off-on" fluorescent sensing system, the linear range of S2- detected by this system is 5.0 × 10-9 to 3.6 × 10-5 M, and the detection limit (LOD) is 1.1 × 10-9 M. The sensing system has higher accuracy and sensitivity, and it can be successfully used in the sensing of S2- in real samples.

A hydrostable CuII coordination network prepared hydrothermally as a "turn-on" fluorescent sensor for S2- and a selective adsorbent for methylene blue

The effective monitoring of water pollution and further purification are pressing yet challenging issues for guaranteeing the health of human beings and the stabilization of ecological systems. For this purpose, the development of efficient sensing and adsorption materials as a result of supramolecular interactions, including coordination and H-bonding etc., have been attracting increasing attention. With the aid of a coordination-driven self-assembly strategy, a new nonporous 2D CuII coordination network, [Cu2L(H2O)2]n (donated as CuCP), based on H4L, where H4L = 4-(4-(3,5-di-carboxy-pyridin-4-yl)phenyl)pyridine-2,6-dicarboxylic acid, was afforded hydrothermally. Structural analysis indicated that CuCP featured a wrinkled network similar to the ancient Chinese folding screens and constructed by the fully deprotonated ligand L4- with the coordination mode of bis(μ2-η1:η1:η2) and penta-coordinated Cu2+, which could be further upgraded to a supramolecular 3D framework as a result of the synergism of multiple C-H⋯O hydrogen bonds. The hydrostability of CuCP could be maintained within a wide pH range from 2 to 12 as verified by PXRD determination, endowing it with potential environmental applications. Thanks to the combination of the soft Lewis acidity of Cu2+ and its large conjugated structure, CuCP could be used as a turn-on fluorescence sensor for S2- and exhibited a different fluorescence response when Na2S, (NH4)2S or H2S were incorporated, even in actual water samples. The sensing mechanisms were disclosed in detail by the combination of experiments and density functional theory (DFT) calculations. Furthermore, CuCP was shown to be a selective and recoverable adsorbent with a maximum adsorption capacity of 379 mg g-1 in 60 minutes for methylene blue (MB). The adsorption mechanism could be a combination of π⋯π stacking, n⋯π interaction, aggregation effects and Soft and Hard Acid-Base theory (HSAB). The results presented herein open up new perspectives for CuII species in environmental applications.

A coumarin-based reversible fluorescent probe for Cu2+ and S2− and its applicability in vivo and for organism imaging

A highly selective fluorescent probe was designed to detect Cu²⁺ and S²⁻ in HeLa cells, zebrafish, and soybean root tissue.

A turn-on red-emitting fluorescent probe for determination of copper(II) ions in food samples and living zebrafish

Herein, we developed a turn-on red-emitting fluorescent probe for the sensitive and selective detection of copper ions (Cu²⁺) in food samples and living zebrafish. The probe employs a hemicyanine scaffold as the fluorophore and a 2-pyridinecarbonyl group as the recognition receptor and quenching moiety. The 2-pyridinecarbonyl moiety can be specifically cleaved by Cu²⁺ and results in an approximately 18-fold fluorescence enhancement of the probe, thereby providing a fluorescence turn-on assay for Cu²⁺. Additionally, the probe exhibited excellent selectivity, high sensitivity, a broad linear relationship (0.020 to 8.0 μM), and a low limit of detection (4.0 nM, S/N = 3) for Cu²⁺. Concomitantly, the probe exhibited satisfactory analytical performance when used with actual food samples. Moreover, the probe could be used for in situ determination of Cu²⁺ in both living plant tissues and in living zebrafish.

Sensitive detection of iron (II) sulfate with a novel reagent using spectrophotometry

In this study, a novel reagent was developed for sensitive detection of iron (II) sulfate, spectrophotometrically. A novel thio-anthraquinone derivative, 1-(Dodecylthio)anthracene-9,10-dione (3), was synthesized from the chemical reaction of 1-Chloroanthraquinone (1) and 1-Dodecanethiol (2) by an original reaction method and was used in the preparation of the novel reagent called Catal's reagent. A synthesized thio-anthraquinone analogue (3) was purified by column chromatography, and its chemical structure was characterized by spectroscopic methods such as Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry (MS), and ultraviolet (UV)-visible spectrophotometry. The chemical and molecular structure of the developed thio-antraquinone derivative (3) was illuminated using computational methods with the GaussView5 and Gaussian09 programs. Various solvents including ethanol, methanol, and acetonitrile were examined in the preparation of the reagent. A concentration range from 0.2 mg mL^-1 up to 10 mg mL^-1 of iron (II) sulfate heptahydrate solution in distilled water was prepared. The absorption spectra of Catal's reagent (0.816 mM) showed three peaks between 185 nm-700 nm of wavelength. However, after the reaction with H₂O₂ and the 30 mM trisodium citrate dihydrate mixture in the presence of an iron sulfate (II) solution, a single peak was observed, producing a stable and reddish/brownish homogenous solution (λ max = 304 nm). The following concentrations of iron (II) sulfate heptahydrate was examined using developed protocol and the reagent, and the concentrations were measured spectrophotometrically at 304 nm, 0.2-1 mg mL^-1. Absorbances of reaction mixtures of iron (II) sulfate remained stable up to 48 h. The results indicated that the novel Catal's reagent can be used for sensitive spectrophotometric detection of iron (II) sulfate in aqueous solutions.

A novel near-infrared turn-on and ratiometric fluorescent probe capable of copper(ii) ion determination in living cells

A near-infrared ratiometric fluorescent probe CR-Ac based on a coumarin-benzopyrylium platform has been developed for selective detection of Cu2+. The cell imaging data revealed the capabilities of CR-Ac in monitoring the dynamic changes of subcellular Cu2+ and the quantification of Cu2+ levels in living cells.

A highly sensitive and selective bis(salamo)-type fluorescent chemosensor for identification of Cu2+ and the continuous recognition of S2-, Arginine and Lysine

A novel bis(salamo)-type chemosensor H₃L was synthesized and characterized. It was found that the sensor molecule can selectively recognize Cu²⁺, and its L-Cu²⁺ is highly sensitive to the detection of S^2- anion, Arginine and Lysine when dissolved in ethanol solvent. The sensor H₃L can be used to identify a relay sensor for Cu²⁺, while the L-Cu²⁺ recognizes S^2- anion, Arginine and Lysine with high selectivity and sensitivity over an acceptable physiological pH range. The detection line of the sensor molecule H₃L is 1.02 × 10^-6 M, and its binding constant to Cu²⁺ is 1.54 × 10⁶ M^-1. The detection line of L-Cu²⁺ as a sensor is calculated as 5.57 × 10^-7 M, and its binding constants with S^2- anion, Arginine and Lysine are 2.80 × 10⁵ M^-1, 5.32 × 10⁶ M^-1 and 5.94 × 10⁶ M^-1, respectively. The crystal structure of the Cu(II) complex [Cu₄(L)₂(CH₃OH)₂]·2NO₃ with the sensor molecule H₃L has been determined by single crystal X-ray crystallography.

An anthraquinone-imidazole-based colorimetric and fluorescent sensor for the sequential detection of Ag+ and biothiols in living cells

An anthraquinone-imidazole-based highly selective colorimetric and fluorescent sensor for the sequential detection of Ag⁺ and biothiols in living cells is reported.

An o-hydroxyl aldehyde structure based naphthalimide derivative: Reversible photochromic properties and its application in ClO- detection in living cells

A bifunctional organic compound 2-butyl-6-hydroxy-1,3-dioxo-2,3-dihydro-1H-benzo[de] isoquinoline-5-carbaldehyde (BHC) with photochromic properties in solid state and probe detection for ClO^- in complete water solution was synthesized and fully characterized. A 'white-yellow-white' reversible photochromic behavior could be observed when alternating UV/vis light irradiation on the solid BHC powder. Good fatigue resistance and adjustable bleaching rate were shown when heating conditions changes. In addition, BHC displayed a high selectivity and low detection limit (1.16 × 10^-8 M) for ClO^-. The photoluminescent fluorescence "on-off" recognition result can be easily identified and BHC has been tested for safely imaging living cells and detecting hypochlorite anion in vitro and vivo. A better water solubility of BHC effectively reduces damage caused by organic solvent in cell imaging progress.

Rhodamine-azobenzene based single molecular probe for multiple ions sensing: Cu2+, Al3+, Cr3+ and its imaging in human lymphocyte cells

A photoinduced electron transfer (PET) and chelation-enhanced fluorescence (CHEF) regulated rhodamine-azobenzene chemosensor (L) was synthesized for chemoselective detection of Al³⁺, Cr³⁺, and Cu²⁺ by UV-Visible absorption study whereas Al³⁺ and Cr³⁺ by fluorimetric study in EtOH-H₂O solvent. L showed a clear fluorescence emission enhancement of 21 and 16 fold upon addition of Al³⁺ and Cr³⁺ due to the 1:1 host-guest complexation, respectively. This is first report on rhodamine-azobenzene based Cr³⁺ chemosensor. The complex formation, restricted imine isomerization, inhibition of PET (photo-induced electron transfer) process with the concomitant opening of the spirolactam ring induced a turn-on fluorescence response. The higher binding constants 6.7 × 10³ M^-1 and 3.8 × 10³ M^-1 for Al³⁺ and Cr³⁺, respectively and lower detection limits 1 × 10^-6 M and 2 × 10^-6 M for Al³⁺ and Cr³⁺, respectively in a buffered solution with high reversible nature describes the potential of L as an effective tool for detecting Al³⁺ and Cr³⁺ in a biological system with higher intracellular resolution. Finally, L was used to map the intracellular concentration of Al³⁺ and Cr³⁺ in human lymphocyte cells (HLCs) at physiological pH very effectively. Altogether, our findings will pave the way for designing new chemosensors for multiple analytes and those chemosensors will be effective for cell imaging study.

A coumarin derivative as a "turn-on" fluorescence probe toward Cd2+ in live cells

A novel coumarin-derived Schiff base fluorescence probe (CTB) has been successfully designed and synthesized through exploiting tris-(2-aminothyl)-amine moiety as a recognition unit for the highly selective and sensitive detection of Cd²⁺. It is based on CN isomerization and the photo-induced electron transfer (PET) mechanism. The investigation into the sensing processes showed that CTB exhibited an excellent selectivity for Cd²⁺. The sensitivity exceeded that of other competing metal ions, and had a high sensitivity, a detection limit of 1.16 × 10^-7 M with the association constants of 1.37 × 10¹¹ M^-2. The experiments including Job's plot, UV-Vis titration, ¹H NMR titration and ESI-MS spectrum established that the probe CTB binds to Cd²⁺ in a 1:2 ratio. Further studies also demonstrated that probe CTB can be successfully applied to the fluorescence imaging of Cd²⁺ in HepG-2 cells.

A dansyl-appended N-heterocycle for Cu2+ and S2- recognition via a displacement mode

A novel l-proline based heterocycle 3 of C₂ symmetry has been designed and synthesized for cation and anion recognition in aqueous solution. Ligand 3 shows a strong affinity to Cu²⁺ ion, and their interaction induces a remarkable fluorescence quenching in DMSO:H₂O=9:1 (HEPES buffer, 0.01M, pH7.4) among various metal ions. Both the in-situ generated and isolated 3-Cu²⁺ complex exhibit specific fluorescence recovery upon addition of S^2-, even in the presence of S₂O₃^2-, L-histidine, and thiol-containing amino acids. For this dual functional switch, a combination of ¹H NMR titration, ESI mass and FT-IR spectra suggest that its sensing behavior is via a displacement mode. Sequential "on-off-on" fluorescence bio-imaging of the heterocycle 3 to Cu²⁺ and S^2- was carried out in HeLa cells.

An easy-to-synthesize multi-photoresponse smart sensor for rapidly detecting Zn2+ and quantifying Fe3+ based on the enol/keto binding mode

A readily available salicylaldazine-modified fluorene Schiff base (EASA-F) exhibits fast fluorescent OFF–ON response to Zn²⁺ and OFF–ON–OFF behavior to Fe³⁺ synchronously accompanied the diverse absorption-ratiometric and colorimetric changes.

An efficient biosensor for monitoring Alzheimer's disease risk factors: modulation and disaggregation of the Aβ aggregation process

An efficient biosensor to monitor Alzheimer's disease risk factors and inhibit Alzheimer's disease by disaggregating Aβ aggregation.

A simple Schiff base as dual-responsive fluorescent sensor for bioimaging recognition of Zn2+ and Al3+ in living cells

A simple Schiff base fluorescent sensor (BDNOL) was synthesized from the reaction of picolinohydrazide and 4-(diethylamino)salicylaldehyde, and developed for selective detection of Al³⁺ and Zn²⁺. This non-fluorescent sensor displayed obvious fluorescence enhancement after binding to Al³⁺/Zn²⁺ ions with high sensitivity and selectivity, accompanied by obvious fluorescence emission enhancement (504 nm for Al³⁺ and 575 nm for Zn²⁺). The detection limits were found to be 8.30 × 10^-8 M for Al³⁺ and 1.24 × 10^-7 M for Zn²⁺. The binding mechanisms between BDNOL and Al³⁺/Zn²⁺ ions were supported by ¹H NMR and HR-MS analysis, and a density functional theory (DFT) study. The sensing behavior was also studied with molecular logic functions of OR, AND, and NOT gates. Furthermore, the fluorescent sensor was successfully used to recognize Al³⁺ and Zn²⁺ in living cells, suggesting that this simple biosensor has great potential in biological imaging applications.

A multi-functional chemosensor for highly selective ratiometric fluorescent detection of silver(I) ion and dual turn-on fluorescent and colorimetric detection of sulfide

A multi-functional chemosensor 1 as silver and sulfide detector was synthesized by the combination of octopamine and 4-dimethylaminocinnamaldehyde. Sensor 1 exhibited a ratiometric fluorescence emission for Ag+ from blue to sky. The binding mode of 1 and Ag+ turned out to be a 1 : 1 ratio as determined using Job plot and electrospray ionization (ESI) mass spectral analyses. The sensing mechanism of 1 with silver ion was unravelled by 1H NMR titrations and theoretical calculations. Sensor 1 also discerned sulfide by enhancing fluorescence intensity and changing colour from yellow to colourless in aqueous solution. The sensing properties of 1 toward S2- were investigated by using ESI-mass analysis, Job plot and 1H NMR titrations. Moreover, 1 could be used as a detector for sulfide in a wide pH range.

Highly selective and sensitive determination of Cu2+ in drink and water samples based on a 1,8-diaminonaphthalene derived fluorescent sensor

A new simple and efficient fluorescent sensor L based on 1,8‑diaminonaphthalene Schiff-base for highly sensitive and selective determination of Cu²⁺ in drink and water has been developed. This Cu²⁺-selective detection over other tested metal ions displayed an obvious color change from blue to colorless easily detected by naked eye. The detection limit is determined to be as low as 13.2 nM and the response time is very fast within 30 s. The 1:1 binding mechanism was well confirmed by fluorescence measurements, IR analysis and DFT calculations. Importantly, this sensor L was employed for quick detection of Cu²⁺ in drink and environmental water samples with satisfactory results, providing a simple, rapid, reliable and feasible Cu²⁺-sensing method.

Donor–π–acceptor (D–π–A) dyad for ratiometric detection of Hg2+ and PPi

A donor–π–acceptor (D–π–A) dyad 1 has been successfully synthesized by linking phenanthrenequinone as an electron donor unit and anthraquinone as an electron acceptor unit through a phenyl ring.