Spindle shaped Fe-Ni metal organic frameworks wrapped with f-MWCNTs for the efficacious sensing of tartrazine

A facile hydrothermal route was employed for the synthesis of iron-nickel bimetal organic frameworks (Fe-Ni bi-MOFs) and composite with an acid functionalized multi-walled carbon nanotubes (Fe-Ni MOF/f-MWCNTs) for electrochemical detection of tartrazine. The as-prepared Fe-Ni MOF/f-MWCNTs was confirmed by the several physicochemical studies. A micro spindle shaped, highly porous, and crystalline Fe-Ni MOF/f-MWCNTs was noticed. The high sensitivity and stability of Fe-Ni MOF/f-MWCNTs/GCE modified electrode was analyzed. Due to its high porosity nature, the analyte molecule effectively gets adsorbed on the modified electrode and undergo electrochemical oxidation effectively. The modified electrode exhibits low limit of detection (LOD) and limit of quantification (LOQ) as 0.04 × 10-6 mol/L and 0.13 × 10-6 mol/L towards tartrazine. These results reveal the potential applications of Fe-Ni MOF/f-MWCNTs/GCE as modified electrode material for sensitive detection of tartrazine along with its robust reproducibility, stability, and effective sensing properties.

Engineering Internal and External Low-Coordination Atoms in Nickel-Organic Framework Nanoarrays to Promote the Electrochemical Oxygen Evolution Reaction

Monometallic nickel-organic frameworks based on a carboxylated ligand [2,6-naphthalenedicarboxylic acid (Ni-NDC)] have abundant and uniformly distributed single-atom Ni sites, enabling superior oxygen evolution reaction (OER) activity. In theory, most of the Ni atoms inside Ni-NDC microcrystals are coordinatively saturated except for the surface. Therefore, there are no accessible low-coordination atoms (LCAs) as electrocatalytic sites for the OER. One effective way is to expose more LCAs by preparing self-supporting Ni-NDC nanoarrays (Ni-NDC NAs) with hierarchical secondary structural units. Another effective method is to create more internal LCAs by removing partial ligands or coordination atoms attached to the Ni atoms. Herein, by combining the two strategies, we engineered LCAs in the interior and exterior of Ni-NDC to synergistically accelerate the OER. In brief, ultrathick "brick-like" Ni-NDC NAs were first prepared with dissolution and coordination effects of NDC on self-sacrificial templates of "agaric-like" nickel hydroxide nanoarrays [Ni(OH)2 NAs]. Subsequently, dual-coordinated NDC was partially replaced by monocoordinated 2-naphthoic acid (NA). The Ni-NDC NAs were further tailed into ultrathin "liner leaf-like" nanoneedle arrays (LCAs-Ni-NDC NAs). As a consequence, the LCAs-Ni-NDC NAs have more internal and external LCAs, which can deliver an OER performance that is superior to that of Ni-NDC NAs.

Bimetallic MOFs-Derived NiFe2O4/Fe2O3 Enabled Dendrite-free Lithium Metal Anodes with Ultra-High Area Capacity Based on An Intermittent Lithium Deposition Model

In practical operating conditions, the lithium deposition behavior is often influenced by multiple coupled factors and there is also a lack of comprehensive and long-term validation for dendrite suppression strategies. Our group previously proposed an intermittent lithiophilic model for high-performance three-dimensional (3D) composite lithium metal anode (LMA), however, the electrodeposition behavior was not discussed. To verify this model, this paper presents a modified 3D carbon cloth (CC) backbone by incorporating NiFe2O4/Fe2O3 (NFFO) nanoparticles derived from bimetallic NiFe-MOFs. Enhanced Li adsorption capacity and lithiophilic modulation were achieved by bimetallic MOFs-derivatives which prompted faster and more homogeneous Li deposition. The intermittent model was further verified in conjunction with the density functional theory (DFT) calculations and electrodeposition behaviors. As a result, the obtained Li-CC@NFFO||Li-CC@NFFO symmetric batteries exhibit prolonged lifespan and low hysteresis voltage even under ultra-high current and capacity conditions (5 mA cm-2, 10 mAh cm-2), what's more, the full battery coupled with a high mass loading (9 mg cm-2) of LiFePO4 cathode can be cycled at a high rate of 5 C, the capacity retention is up to 95.2 % before 700 cycles. This work is of great significance to understand the evolution of lithium dendrites on the 3D intermittent lithiophilic frameworks.

A mixed-ligand Co metal-organic framework and its carbon composites as excellent electrocatalysts for the oxygen evolution reaction in green-energy devices

Oxygen evolution reaction (OER) electrocatalysts are frequently made from noble metal-based oxides like ruthenium/iridium oxides. However, because of their scarcity and high price, researchers are now focusing on creating innovative OER catalysts based on affordable transition metals that have improved electrical conductivity and accessibility to active sites. Metal-organic frameworks (MOFs), a unique class of inorganic materials with excellent physical and chemical properties, have witnessed significant progress in promising green energy systems. In this work, a novel mixed-ligand metal-organic framework [Co(μ-1κN,2κN'-BDP)(μ3-1κoo',2κo''2κo'''-BTC)]n·nH2O (BDP = boron-dipyrromethene or BODIPY; BTC = benzene tricarboxylate) denoted as CoBDPMOF has been synthesized, and its composites with different carbon materials have been designed. Compared to the pristine MOF, the composites showed enhanced electrocatalytic activity toward the oxygen evolution reaction (OER) in alkaline media. In addition, the CoBDPMOF with activated carbon showed the highest OER performance with a low Tafel slope (82 mV dec-1) and the highest j600 (59.8 mA cm-2), outperforming noble metal IrO2, the OER benchmark electrocatalyst. This study presents new insights into the design and application of CoBDPMOF-based materials for energy conversion and suggests promising avenues for further research and development in electrocatalysis.

Electrocatalytic Coenhancement of Bimetallic Polyphthalocyanine-Anchored Ru Nanoclusters Enabling Efficient Overall Water Splitting at Ampere-Level Current Densities

Efficient electrocatalysts capable of operating continuously at industrial ampere-level current densities are crucial for large-scale applications of electrocatalytic water decomposition for hydrogen production. However, long-term industrial overall water splitting using a single electrocatalyst remains a major challenge. Here, bimetallic polyphthalocyanine (FeCoPPc)-anchored Ru nanoclusters, an innovative electrocatalyst comprising the hydrogen evolution reaction (HER) active Ru and the oxygen evolution reaction (OER) active FeCoPPc, engineered for efficient overall water splitting are demonstrated. By density functional theory calculations and systematic experiments, the electrocatalytic coenhancement effect resulting from unique charge redistribution, which synergistically boosts the HER activity of Ru and the OER activity of FeCoPPc by optimizing the adsorption energy of intermediates, is unveiled. As a result, even at a large current density of 2.0 A cm-2 , the catalyst exhibits low overpotentials of 220 and 308 mV, respectively, for HER and OER. It exhibits excellent stability, requiring only 1.88 V of cell voltage to achieve a current density of 2.0 A cm-2 in a 6.0 m KOH electrolyte at 70 °C, with a remarkable operational stability of over 100 h. This work provides a new electrocatalytic coenhancement strategy for the design and synthesis of electrocatalyst, paving the way for industrial-scale overall water splitting applications.

Introducing of Cu(I) in MOFs by In Situ Reduction with Ni as the Catalyst for Efficient Olefin/Paraffin Separation

Olefins can be cracked to provide more low-carbon olefins than paraffins; therefore, separation of olefin/paraffin mixtures is essential for arranging hydrocarbon molecules for directed conversion. In this article, a simple approach for reducing copper atoms in Cu-BTC has been developed to improve olefin/paraffin adsorption capacity and selectivity. Considering that Cu-BTC shows adsorption benefits, its olefin/paraffin adsorption and separation performance were improved further by in situ reduction of Cu(II) to Cu(I) in Cu-BTC using ethanol as the reducing agent and nickel ions as the catalyst. The results revealed that during the reduction process, Cu ion conversion from tetra-ligand to diligand considerably increased their specific surface area, resulting in more active adsorption sites inside the modified sample. The ratio of Cu(I)/Cu(II) in the modified samples varied from 0.57 to 0.96. When Cu(II) of Cu-BTC was reduced to Cu(I), the adsorption capacities of 1-hexene increased from 145.97 to 243.65 mg/g, whereas n-hexane adsorption increased only slightly from 8.18 to 11.43 mg/g, resulting in an acceptable increase in selectivity from 17.84 to 21.32. Cu-BTC, due to its own Cu atoms, minimizes the substantial requirements for the synthesis process as well as the oxygen avoidance conditions for storage when monovalent copper is introduced, compared to other porous materials. Experimental results found that when Cu(I) was introduced, the Lewis acidic sites of the modified Cu-BTC material were increased, and Cu(I) has an electrical structure that makes it susceptible to both accepting and donating too many d electrons, resulting in a stronger adsorption of olefins containing π-electrons to them. Materials Studio simulation revealed that the isosteric heats of modified Cu-BTC increased by 2.7 kJ/mol, indicating that it has a stronger adsorption capacity for olefins.

Ultralow ruthenium modification of cobalt metal-organic frameworks for enhanced efficient bifunctional water splitting

Hydrogen economy has emerged as a promising alternative to the current hydrocarbon economy. It involves harvesting renewable energy to split water into hydrogen and oxygen and then further utilising clean hydrogen fuel for various applications. The rational exploration of advanced non-precious metal bifunctional electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is critical for efficient water splitting. Herein, an ultralow Ru-modified cobalt metal-organic framework (CoRu0.06-MOF/NF) two-dimensional nanosheet array bifunctional catalyst was fabricated through a strategy under mild experimental conditions. The obtained CoRu0.06-MOF/NF exhibited excellent bifunctional electrocatalytic activity and stability in alkaline media, with low overpotentials of 37 and 181 mV and significant durability for more than 95 and 110 h toward the HER and OER at 10 mA cm-2, respectively. The experimental results showed that the two-dimensional nanoarray structure had a large specific surface area and abundant exposed active sites. Additionally, ultralow Ru modification optimized the electronic structure and improved the conductivity of the cobalt metal-organic frameworks, thereby reducing the energy barrier of the rate-limiting step and accelerating the water splitting reaction.

MOF-Based Chemiresistive Gas Sensors: Toward New Functionalities

The sensing performances of gas sensors must be improved and diversified to enhance quality of life by ensuring health, safety, and convenience. Metal-organic frameworks (MOFs), which exhibit an extremely high surface area, abundant porosity, and unique surface chemistry, provide a promising framework for facilitating gas-sensor innovations. Enhanced understanding of conduction mechanisms of MOFs has facilitated their use as gas-sensing materials, and various types of MOFs have been developed by examining the compositional and morphological dependences and implementing catalyst incorporation and light activation. Owing to their inherent separation and absorption properties and catalytic activity, MOFs are applied as molecular sieves, absorptive filtering layers, and heterogeneous catalysts. In addition, oxide- or carbon-based sensing materials with complex structures or catalytic composites can be derived by the appropriate post-treatment of MOFs. This review discusses the effective techniques to design optimal MOFs, in terms of computational screening and synthesis methods. Moreover, the mechanisms through which the distinctive functionalities of MOFs as sensing materials, heterostructures, and derivatives can be incorporated in gas-sensor applications are presented.

Synergistic Modulation of Electronic Interaction to Enhance Intrinsic Activity and Conductivity of Fe-Co-Ni Hydroxide Nanotube for Highly Efficient Oxygen Evolution Electrocatalyst

The large-scale hydrogen production and application through electrocatalytic water splitting depends crucially on the development of highly efficient, cost-effective electrocatalysts for oxygen evolution reaction (OER), which, however, remains challenging. Here, a new electrocatalyst of trimetallic Fe-Co-Ni hydroxide (denoted as FeCoNiOx Hy ) with a nanotubular structure is developed through an enhanced Kirkendall process under applied potential. The FeCoNiOx Hy features synergistic electronic interaction between Fe, Co, and Ni, which not only notably increases the intrinsic OER activity of FeCoNiOx Hy by facilitating the formation of *OOH intermediate, but also substantially improves the intrinsic conductivity of FeCoNiOx Hy to facilitate charge transfer and activate catalytic sites through electrocatalyst by promoting the formation of abundant Co3+ . Therefore, FeCoNiOx Hy delivers remarkably accelerated OER kinetics and superior apparent activity, indicated by an ultra-low overpotential potential of 257 mV at a high current density of 200 mA cm-2 . This work is of fundamental and practical significance for synergistic catalysis related to advanced energy conversion materials and technologies.

Gel transformation as a general strategy for fabrication of highly porous multiscale MOF architectures

The structure and chemistry of metal-organic frameworks or MOFs dictate their properties and functionalities. However, their architecture and form are essential for facilitating the transport of molecules, the flow of electrons, the conduction of heat, the transmission of light, and the propagation of force, which are vital in many applications. This work explores the transformation of inorganic gels into MOFs as a general strategy to construct complex porous MOF architectures at nano, micro, and millimeter length scales. MOFs can be induced to form along three different pathways governed by gel dissolution, MOF nucleation, and crystallization kinetics. Slow gel dissolution, rapid nucleation, and moderate crystal growth result in a pseudomorphic transformation (pathway 1) that preserves the original network structure and pores, while a comparably faster crystallization displays significant localized structural changes but still preserves network interconnectivity (pathway 2). MOF exfoliates from the gel surface during rapid dissolution, thus inducing nucleation in the pore liquid leading to a dense assembly of percolated MOF particles (pathway 3). Thus, the prepared MOF 3D objects and architectures can be fabricated with superb mechanical strength (>98.7 MPa), excellent permeability (>3.4 × 10^-10 m²), and large surface area (1100 m² g^-1) and mesopore volumes (1.1 cm³ g^-1).

One-step rapid synthesis of Ni0.5Co0.5-CPO-27 nanorod array with oxygen vacancies based on DBD microplasma: As an effective non-enzymatic glucose sensor for beverage and human serum

The rational design of high-efficiency catalysts for non-enzymatic glucose sensing is extremely important for the timely and effective monitoring of glucose content in beverages and human blood. A 3D bimetallic organic framework (Coordination Polymer of Oslo, CPO) nanorod array with oxygen vacancies was green fabricated on carbon cloth (Ni_0.5Co_0.5-CPO-27 NRA/CC) using dielectric barrier discharge (DBD) microplasma for the first time. Density functional theory (DFT) calculations demonstrated that the oxygen vacancy of Ni_0.5Co_0.5-CPO-27 can be effectively induced under DBD microplasma conditions. Based on the 3D nanorod arrays with rich oxygen vacancies and bimetallic synergistic effects, as a non-enzyme glucose sensor, the Ni_0.5Co_0.5-CPO-27 electrode exhibited a sensitivity of 8499.5 μA L/mmol cm^-2 and 3239.2 μA L/mmol cm^-2 and a limit of detection (LOD) of 0.16 μmol/L (S/N = 3). It has been successfully applied to the determination of glucose levels in real samples such as cola, green tea and human serum.

Operando spectroscopies capturing surface reconstruction and interfacial electronic regulation by FeOOH@Fe2O3@Ni(OH)2 heterostructures for robust oxygen evolution reaction

Developing high-performance and low-cost electrocatalysts for oxygen evolution reaction (OER) and understanding the phase evolution in the catalytic process are vital to improving the overall efficiency of electrochemical water splitting. Herein, a hybrid heterogeneous FeOOH@Fe₂O₃@Ni(OH)₂ electrocatalyst with robust OER intrinsic activity and a low overpotential of 269 mV to obtain a current density of 100 mA cm^-2 and a Tafel slope value of 60.15 mV dec^-1 is effectively prepared. The dynamic surface evolution has been detected by in-situ Raman spectroscopy, which exposes that FeOOH@Fe₂O₃@Ni(OH)₂ is reconstituted as Ni(Fe)OOH demonstrated as catalytically active species under high potential. X-ray photoelectron spectroscopy analysis indicates that partial electrons of Ni in the heterogeneous interface transfer to Fe. Furthermore, partial Fe doping of NiOOH under high potential accompanied by the oxidized Ni³⁺ with optimized d-orbit electronic configuration for nearly unity e_g occupancy results in proper chemisorption bonding strength for oxygen reaction intermediates and is conducive to enhancing OER reaction kinetics. This work provides ideas that multicomponent heterostructure can adjust the electronic structure of iron and nickel to enhance the intrinsic activity of OER, which could help with the design and synthesis of high-performance OER catalysts used in energy storage and conversion.

Revealing the enhanced photoelectrochemical water oxidation activity of Fe-based metal-organic polymer-modified BiVO4 photoanode

Metal-organic polymers (MOPs) can enhance the photoelectrochemical (PEC) water oxidation performance of BiVO₄ photoanodes, but their PEC mechanisms have yet to be comprehended. In this work, we constructed an active and stable composite photoelectrode by overlaying a uniform MOP on the BiVO₄ surface using Fe²⁺ as the metal ions and 2,5-dihydroxyterephthalic acid (DHTA) as ligand. Such modification on the BiVO₄ surface yielded a core-shell structure that could effectively enhance the PEC water oxidation activity of the BiVO₄ photoanode. Our intensity-modulated photocurrent spectroscopy analysis revealed that the MOP overlayer could concurrently reduce the surface charge recombination rate constant (k_sr) and enhance the charge transfer rate constant (k_tr), thus accelerating water oxidation activity. These phenomena can be ascribed to the passivation of the surface that inhibits the recombination of the charge carrier and the MOP catalytic layer that improves the hole transfer. Our rate law analysis also demonstrated that the MOP coverage shifted the reaction order of the BiVO₄ photoanode from the third-order to the first-order, resulting in a more favorable rate-determining step where only one hole accumulation is required to overcome water oxidation. This work provides new insights into the reaction mechanism of MOP-modified semiconductor photoanodes.

Rationally Reconstructed Metal-Organic Frameworks as Robust Oxygen Evolution Electrocatalysts

Reconstructing metal-organic framework (MOFs) toward a designed framework structure provides breakthrough opportunities to achieve unprecedented oxygen evolution reaction (OER) electrocatalytic performance, but has rarely, if ever, been proposed and investigated yet. Here, the first successful fabrication of a robust OER electrocatalyst by precision reconstruction of an MOF structure is reported, viz., from MOF-74-Fe to MIL-53(Fe)-2OH with different coordination environments at the active sites. Due to the radically reduced e_g -t_2g crystal-field splitting in Fe-3d and the much suppressed electron-hopping barriers through the synergistic effects of the O species the efficient OER of in MIL-53(Fe)-2OH is guaranteed. Benefiting from this desired electronic structure, the designed MIL-53(Fe)-2OH catalyst exhibits high intrinsic OER activity, including a low overpotential of 215 mV at 10 mA cm^-2 , low Tafel slope of 45.4 mV dec^-1 and high turnover frequency (TOF) of 1.44 s^-1 at 300 mV overpotential, over 80 times that of the commercial IrO₂ catalyst (0.0177 s^-1 ).Consistent with the density functional theory (DFT) calculations, the real-time kinetic simulation reveals that the conversion from O* to OOH* is the rate-determining step on the active sites of MIL-53(Fe)-2OH.

Ni/Co/Co3O4@C nanorods derived from a MOF@MOF hybrid for efficient overall water splitting

The design of nanostructured materials for efficient bifunctional electrocatalysts has gained tremendous attention, yet developing a fast and effective synthesis strategy remains a challenge. Here, we present a fast and scalable synthetic method of Ni/Co/Co₃O₄@C nanorods for efficient overall water splitting. Using microwave synthesis, we first produced a unique Ni-MOF@Co-MOF in a few minutes. Subsequently, we transformed the MOF@MOF into hybrid Ni/Co/Co₃O₄ nanoparticles covered with graphitic carbon in a few seconds using laser-scribing. The prepared bimetallic catalysts showed remarkably low overpotentials of 246 mV for the oxygen evolution reaction (OER) and 143 mV for the hydrogen evolution reaction (HER) at a current density of 30 mA cm^-2. An electrolyzer assembled with the bimetallic catalysts delivered a high current density of 20 mA cm^-2 at a voltage of 1.6 V and exhibited good durability (nearly 91.6% retention even after a long-running operation of 24 h at a voltage of 1.52 V). Our proposed method could serve as a powerful method for creating various multimetallic hybrid nanocatalysts with unique hierarchical structures from diverse MOFs.

Reticular Coordination Induced Interfacial Interstitial Carbon Atoms on Ni Nanocatalysts for Highly Selective Hydrogenation of Bio-Based Furfural under Facile Conditions

A rational design of transition metal catalysts to achieve selective hydrogenation of furfural (FFR) to tetrahydrofurfuryl alcohol (THFA) under facile conditions is a promising option. In this work, a series of Ni catalysts were synthesized by controlled thermal treatment of Ni-based metal-organic frameworks (MOFs), with the purpose of modulating the interface of nickel nanoparticles by the reticular coordination in MOF precursors. The catalytic performance indicates that Ni/C catalyst obtained at 400 °C exhibits efficient conversion of FFR (>99%) and high selectivity to THFA (96.1%), under facile conditions (80 °C, 3 MPa H2, 4.0 h). The decomposition of MOF at low temperatures results in highly dispersed Ni0 particles and interfacial charge transfer from metal to interstitial carbon atoms induced by coordination in MOF. The electron-deficient Ni species on the Ni surface results in an electropositive surface of Ni nanoparticles in Ni/C-400, which ameliorates furfural adsorption and enhances the hydrogen heterolysis process, finally achieving facile hydrogenation of FFR to THFA.

Metal-Organic Framework-Derived Fe-Doped Ni3Se4/NiSe2 Heterostructure-Embedded Mesoporous Tubes for Boosting Oxygen Evolution Reaction

It is crucial but challenging to promote sluggish kinetics of oxygen evolution reaction (OER) for water splitting via finely tuning the hierarchical nanoarchitecture and electronic structure of the catalyst. To address such issues, herein we present iron-doped Ni₃Se₄/NiSe₂ heterostructure-embedded metal-organic framework-derived mesoporous tubes (Ni-MOF-Fe-Se-400) realized by an interfacial engineering strategy. Due to the hierarchical nanoarchitecture of conductive two-dimensional nanosheet-constructed MOF-derived mesoporous tubes, coupled with fine tuning of the electronic structure via Fe-doping and interactions between Ni₃Se₄/NiSe₂ heterostructures, the Ni-MOF-Fe-Se-400 catalyst delivers superior OER activity: it requires only a low overpotential of 242 mV to achieve 10 mA cm^-2 (E_j=10), surpassing the benchmark RuO₂ (E_j=10 = 286 mV) and displays exceptional durability in the chronoamperometric i-t test with a small current decay (6.2%) after 72 h. Furthermore, the water splitting system comprises a Ni-MOF-Fe-Se-400 anode and a Pt/C cathode requires a low cell voltage of 1.576 V to achieve E_j=10 with an excellent Faradic efficiency (∼100%), outperforming the RuO₂-Pt/C combination. This work presents a novel interfacial engineering strategy to finely adjust the morphology and electronic structure of the non-noble metal-based OER catalyst via a facile fabrication method.

Recent Progress of Advanced Conductive Metal-Organic Frameworks: Precise Synthesis, Electrochemical Energy Storage Applications, and Future Challenges

Metal-organic frameworks (MOFs) with diverse composition, tunable structure, and unique physicochemical properties have emerged as promising materials in various fields. The tunable pore structure, abundant active sites, and ultrahigh specific surface area can facilitate mass transport and provide outstanding capacity, making MOFs an ideal active material for electrochemical energy storage and conversion. However, the poor electrical conductivity of pristine MOFs severely limits their applications in electrochemistry. Developing conductive MOFs has proved to be an effective solution to this problem. This review focuses on the design and synthesis of conductive MOF composites with judiciously chosen conducting materials, pristine MOFs, and assembly methods, as well as the preparation of intrinsically conductive MOFs based on building 2D π-conjugated structures, introducing mixed-valence metal ions/redox-active ligands, designing π-π stacked pathways, and constructing infinite metal-sulfur chains (-M-S-)_∞ . Furthermore, recent progress and challenges of conductive MOFs for energy storage and conversion (supercapacitors, Li-ion batteries, Li-S batteries, and electrochemical water splitting) are summarized.

Fabrication of efficient protein imprinted materials based on pearl necklace-like MOFs bacterial cellulose composites

The acquisition of efficient protein isolation substances is vital for proteomic research, whereas it's still challenging nowadays. Herein, an elaborately designed protein imprinted material based on a bacterial cellulose@ZIF-67 composite carrier (BC@ZIF-67) is proposed for the first time. In particular, due to the ultrafine fiber diameter and abundant hydroxyl functional groups of the bacterial cellulose, BC@ZIF-67 presented a compact arrangement structure similar to a pearl necklace, which greatly promoted template immobilization and mass transfer resistance in protein imprinting technology. Therefore, the protein-imprinted material (BC@ZIF-67@MIPs) fabricated by surface imprinting technology and template immobilization strategy could exhibit ultrahigh adsorption capacity (1017.0 mg g^-1), excellent recognition (IF = 5.98) and rapid adsorption equilibrium time (50 min). In addition, based on the experiment outcomes, our team employed BC@ZIF-67@MIPs to enrich template protein in blended protein solutions and biosamples, identifying them as underlying candidates for isolating and purifying proteins.

Active Sites In Situ Implanted Hybrid Zeolitic Imidazolate Frameworks for a Water Oxidation Catalyst

Metal-organic frameworks (MOFs) have been a focus of research because of their unique porous structure, but they are usually not directly for electrocatalysis. Herein, we prepared a special class of Fe/Zn/Mo-based trimetallic hybrid zeolitic imidazolate frameworks by in situ solvothermal synthesis that have the potential to act directly as highly efficient oxygen evolution reaction electrocatalysts. This work provides a foundation for the preparation of multimetal MOFs and expands the investigation of electrocatalysts.

Introducing a Synergistic Ligand Containing an Exotic Metal in Metal-Organic Framework Nanoarrays Enabling Superior Electrocatalytic Water Oxidation Performance

Designing and fabricating well-aligned metal-organic framework nanoarrays (MOF NAs) with high electrocatalytic activity and durability for water oxidation at large current density remain huge challenges. Here the vertical NiFc-MOF NAs constructed from agaric-like nanosheets were fabricated by introducing a ligand containing an exotic Fe atom to coordinate with Ni ion using Ni(OH)₂ NAs as a self-sacrificing template. The NiFc-MOF NAs exhibited superior water oxidation performance with a very low overpotential of 161 mV at the current density of 10 mA cm^-2. Chronoamperometry was tested at an overpotential of 250 mV, which delivered an initial industrial-grade current density of 702 mA cm^-2 and still remained at 694 mA cm^-2 after 24 h. Furthermore, it possessed fast reaction kinetics with a small Tafel slope of 29.5 mV dec^-1. The superior electrocatalytic performance can be ascribed to the structural advantage of vertically grown agaric-like NAs and the synergistic electron coupling between Ni and Fe atoms, namely, electron transfer from Ni to Fe atoms in NiFc-MOF NAs. The exposed density and valence state of active Ni sites were synchronously increased. Furthermore, the energy barrier for the adsorption/desorption of oxygenated intermediates was ultimately optimized for water oxidation. This work provides a novelty orientation to accelerate electrocatalytic performance of MOF NAs by introducing self-sacrificing templates containing one metal and synergistic ligand containing dissimilar metal.

In Situ Grown Mn(II) MOF upon Nickel Foam Acts as a Robust Self-Supporting Bifunctional Electrode for Overall Water Splitting: A Bimetallic Synergistic Collaboration Strategy

The design of highly efficient, cost-effective non-noble metal-based electrocatalysts with superior stability for overall water splitting (OWS) reactions is of great importance as well as of immense challenge for the upcoming sustainable and green energy conversion technologies. Herein, a convenient and simple in situ solvothermal method has been adopted to fabricate a self-supported, binder-free 3D electrode (Mn-MOF/NF) by the direct growth of a newly synthesized carboxylate-based pristine Mn(II)-metal-organic framework (Mn-MOF) upon the conducting substrate nickel foam (NF). The binder-free Mn-MOF/NF electrode exhibits excellent performances toward OWS with ultralow overpotentials of 280 mV@20 mA cm^-2 for the oxygen evolution reaction (OER) and 125 mV@10 mA cm^-2 for the hydrogen evolution reaction (HER) with remarkable durability. Mn-MOF/NF can also attain a current density of 10 mA cm^-2 with a low cell voltage of 1.68 V in a 0.1 M KOH solution in a two-electrode system for OWS. The direct growth of nonconducting electroactive Mn-MOF materials upon conducting substrate NF provides an excellent mass transport of the electrolyte with a relatively low contact resistance due to the strong catalyst-substrate contact and enhances the efficient electron transport for OWS. The redox chemical etching of the self-sacrificial substrate NF during solvothermal synthesis introduces redox-active Ni²⁺ in Mn-MOF/NF. Thus, the excellent OWS electrocatalytic activity can mainly be attributed to the bimetallic synergistic collaboration of the two redox active metal centers (Mn²⁺ and Ni²⁺) along with the excellent support surface of NF, which provides a high specific surface area and maximum utilization of the electroactive metal ion sites by preventing the self-aggregation of the active sites. The Mn-MOF/NF electrode also exhibits superb stability and durability for a prolonged time throughout the multiple cycles of full water splitting reactions. Therefore, this work elucidates a convenient and smart approach for constructing MOF-based bifunctional electrocatalysts for OWS.

In Situ Synthesis of MOF-74 Family for High Areal Energy Density of Aqueous Nickel-Zinc Batteries

Limited by single metal active sites and low electrical conductivity, designing nickel-based metal-organic framework (MOF) materials with high capacity and high energy density remains a challenge. Herein, a series of bi/multimetallic MOF-74 family materials in situ grown on carbon cloth (CC) by doping M^x+ ions in Ni-MOF-74 is fabricated: NiM-MOF@CC (M = Mn²⁺ , Co²⁺ , Cu²⁺ , Zn²⁺ , Al³⁺ , Fe³⁺ ), and NiCoM-MOF@CC (M = Mn²⁺ , Zn²⁺ , Al³⁺ , Fe³⁺ ). The type and ratio of doping metal ions can be adjusted while the original topology is preserved. Different metal ions are confirmed by X-ray absorption fine structure (XAFS). Furthermore, these Ni-based MOF electrodes are directly utilized as cathodes for aqueous nickel-zinc batteries (NZBs). Among all the as-prepared electrodes, NiCo-MOF@CC-3 (NCM@CC-3), with an optimized Co/Ni ratio of 1:1, exhibits the best electrical conductivity, which is according to the density functional theory (DFT) theoretical calculations. The NCM@CC-3//Zn@CC battery achieves a high specific capacity of 1.77 mAh cm^-2 , a high areal energy density of 2.97 mWh cm^-2 , and high cycling stability of 83% capacity retention rate after 6000 cycles. The synthetic strategy based on the coordination effect of metal ions and the concept of binder-free electrodes provide a new direction for the synthesis of high-performance materials in the energy-storage field.

A yolk-shell structure construction for metal-organic frameworks toward an enhanced electrochemical water splitting catalysis

NiFe-based transition metal catalysts are widely used in electrocatalysis, especially in the field of water splitting, due to their excellent electrochemical performance. Herein, a simple method was designed to synthesize a Ni MOF based on nickel foam and it was modified with Fe. After the introduction of Fe, the resulting material exhibits an obvious yolk-shell structure, which greatly increases the specific surface area and facilitates the construction of active sites. At the same time, the synergy between Ni and Fe is conducive to optimizing the electronic structure and effectively improving the poor stability of the MOF. As a result, the synthesized Ni MOF-Fe-2 only needs an overpotential of 229 mV to achieve the OER at a current density of 10 mA cm^-2, which is better than most reported transition metal-based electrocatalysts. To our surprise, it showed extraordinary stability under the voltage used for water splitting.

Construction of superhydrophilic metal-organic frameworks with hierarchical microstructure for efficient overall water splitting

Metal-organic frameworks (MOFs) display promising potential due to their exquisite structural advantages. Carboxylate-based MOFs, such as MIL-53 structures, attract a lot of attention among MOF families because of their remarkable stability in water and even alkaline condition. Hence, the delicate hierarchical microstructure is constructed by introducing MoO₄^2- into NH₂-MIL-53(NiFe) using a straightforward solvothermal strategy. The NiFeMo-MOF/NF electrode manifests a superior OER performance, producing an overpotential of 239 mV at 50 mA cm^-2 and a decent Tafel slope of 87.0 mV dec^-1. Furthermore, in a typical electrodeposition equipment, NiFeMo-MOF/NF is applied as the working electrode and the composite electrode named as (M) Ni-NiOOH/NF is generated by electrodeposition and electrooxidation process to assess HER performance, producing an overpotential of 119 mV at 50 mA cm^-2 and a decent Tafel slope of 58.3 mV dec^-1. The integrated electrolysis device delivers an extraordinarily low cell voltage of 1.50 V at 10 mA cm^-2 while applying NiFeMo-MOF/NF as the anode, (M)Ni-NiOOH/NF as the cathode for overall water splitting, exceeding the noble RuO₂/NF||Pt-C/NF (1.60 V@10 mA cm^-2). This study provides a promising design strategy for future electrolysis catalysts.

Modulated construction of Fe-based MOF via formic acid modulator for enhanced degradation of sulfamethoxazole：Design, degradation pathways, and mechanism

Metal-organic frameworks (MOFs) have attracted more attention because of their excellent environmental catalytic capabilities. Modulation approach as an advanced assistant strategy is vital essential to enhancing the performance of MOFs. In this study, the modulated method was used to successfully synthesize a group of Fe-based MOFs, with formic acid as the modulator on the synthesis mixture. The most modulated sample Fe-MOFs-2 exhibit high specific surface areas and higher catalytic activity, which could effectively degrade SMX via PS activation, with almost 95% removal efficiency within 120 min. The results revealed that the % RSE of modulated Fe-MOFs-2 increased from 2.31 to 3.27 when compared with the origin Fe-MOFs. This may be due to the addition of formic acid induces the formation of more coordinatively unsaturated metal sites in the catalyst, resulting in structural defects. In addition, the quenching experiment and EPR analysis verified SO₄^-·and·OH as the major active free radicals in the degradation process. Modulated Fe-MOFs-2 demonstrated good reusability and stability under fifth cycles. Finally, four possible degradation pathways and catalytic mechanism of Fe-MOFs-2 was tentatively proposed. Our work provides insights into the rational design of modulated Fe-MOFs as promising heterogeneous catalysts for advanced wastewater treatment.

Observation of oxygen evolution over a {Ni12}-cluster-based metal-organic framework

The development of efficient electrocatalysts based on non-noble metals for oxygen evolution reaction (OER) remains an important and challenging task. Multinuclear transition-metal clusters with high structural stability are promising OER catalysts but their catalytic role is poorly understood. Here we report the crystallographic observation of OER activity over robust {Ni12}-clusters immobilised in a porous metal-organic framework, NKU-100, by single-crystal X-ray diffraction as a function of external applied potential. We observed the aggregation of confined oxygen species around the {Ni12}-cluster as a function of applied potential during the electrocatalytic process. The refined occupancy of these oxygen species shows a strong correlation with the variation of current density. This study demonstrates that the enrichment of oxygen species in the secondary co-ordination sphere of multinuclear transition-metal clusters can promote the OER activity.

Route to the Structure-Controlled Synthesis of Fe Nanobelts and Their Oxygen Evolution Reaction Application

Belt-shaped metal-organic frameworks (MOFs) have received extensive attention because of their unique structure. In this Communication, Fe-MOF nanobelts were synthesized by a solvothermal method with Fe²⁺ as the metal source and could not be obtained by using Fe³⁺ as the metal source. The final result shows that Fe²⁺ played a transitional role in the process of achieving belt-shaped and cubelike structural changes. Our work provides an idea for the synthesis of belt-shaped MOFs and promotes the development of electrocatalysts.

Two new Ni/Co-MOFs as electrocatalysts for the oxygen evolution reaction in alkaline electrolytes

Two novel Ni/Co-MOFs electrocatalysts were synthesized. Ni-MOF demonstrated a good activity in electrocatalytic OER performances and short-term electrochemical durability.

CO2-assisted synthesis of crystalline/amorphous NiFe-MOF heterostructure for high-efficiency electrocatalytic water oxidation

Modulating the crystalline phase and structure of metal organic frameworks (MOFs) for superior electrocatalytic oxygen evolution reaction (OER) performance is a significant but challenging topic. Herein, a facile CO2-assisted strategy...

Synthesis of FeNiCo Ternary Hydroxides through Green Grinding Method with Metal-Organic Frameworks as Precursors for Oxygen Evolution Reaction

Metal-organic framework (MOF)-derived materials have been widely applied to diversified fields until now due to their flexible processibility. Different kinds of suitable materials can be synthesized by varying MOF templates/precursors and synthesis methods. An appropriate method can skillfully fabricate the materials with excellent performance while meeting the environmentally friendly concept. In this work, a green and flexible grinding method was introduced to synthesize MOF-derived FeNiCo trimetallic materials without solvent-assistance, in which Co-ZIF-L was selected as a sacrificial precursor and Fe³⁺ and Ni²⁺ as etchants and dopants. Surprisingly, the as-prepared FeNiCo ternary hydroxides supported on Ni foam (G-FeNi-Co-ZIF-L/NF) showed superior electrocatalytic performance for the oxygen evolution reaction (OER) with a low overpotential of 248 mV at 10 mA cm^-2 . This work provides a prospective approach to synthesize various MOF-derived multi-metallic materials, which also opens the door for syntheses of OER electrocatalysts.

Rational Design and Growth of MOF-on-MOF Heterostructures

Multiporous metal-organic frameworks (MOFs) have emerged as a subclass of highly crystalline inorganic-organic materials, which are endowed with high surface areas, tunable pores, and fascinating nanostructures. Heterostructured MOF-on-MOF composites are recently becoming a research hotspot in the field of chemistry and materials science, which focus on the assembly of two or more different homogeneous or heterogeneous MOFs with various structures and morphologies. Compared with one single MOF, the dual MOF-on-MOF composites exhibit unprecedented tunability, hierarchical nanostructure, synergistic effect, and enhanced performance. Due to the difference of inorganic metals and organic ligands, the lattice parameters in a, b, and c directions in the single crystal cells could bring about subtle or large structural difference. It will result in the composite material with distinct growth methods to obtain secondary MOF grown from the initial MOF. In this review, the authors wish to mainly outline the latest synthetic strategies of heterostructured MOF-on-MOFs and their derivatives, including ordered epitaxial growth, random epitaxial growth, etc., which show the tutorial guidelines for the further development of various MOF-on-MOFs.

A Highly-Efficient Oxygen Evolution Electrocatalyst Derived from a Metal-Organic Framework and Ketjenblack Carbon Material

The composite of the metal-organic framework (MOF) Ni(Fe)-MOF-74 and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the in-situ MOF synthesis in a one-step solvothermal reaction. The composite material features a remarkable electrochemical oxygen evolution reaction (OER) performance where the overpotential at 10 mA/cm2 and the current density at 1.7 VRHE are recorded as 0.274 VRHE and 650 mA/cm2 , respectively, in 1 mol/L KOH. In particular, the activation of nickel-iron clusters from the MOF under an applied anodic bias steadily boosts the OER performance. Although Ni(Fe)-MOF-74 goes through some structural modification during the electrochemical measurements, the stabilized and optimized composite material shows excellent OER performance. This simple strategy to design highly-efficient electrocatalysts, utilizing readily available precursors and carbon materials, will leverage the use of diverse metal-organic complexes into electrode fabrication with a high energy conversion efficiency.

Recent progress in pristine MOF-based catalysts for electrochemical hydrogen evolution, oxygen evolution and oxygen reduction

Among various kinds of materials that have been investigated as electrocatalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), metal-organic frameworks (MOFs) has emerged as a promising material for electrocatalyzing these vital processes owing to their structural merits that integrate advantages of both homogeneous and heterogeneous catalysts; however there is still big room for their improvement in terms of inferior activity and poor conductivity, as well as the ambiguity of real active sites. In this review, advanced strategies with the aim of solving the activity and conductivity problems are summarized as microstructure engineering and conductivity improvement, respectively. The structural evolution of some MOFs and their real active species has also been discussed. Finally, perspectives on the development of MOF materials for HER, OER and ORR electrocatalysis are provided.

Dendrimer-Ni-Based Material: Toward an Efficient Ni-Fe Layered Double Hydroxide for Oxygen-Evolution Reaction

Ni/Fe oxides are among the most widely used catalysts for water splitting. This paper outlines a new approach to synthesize Ni-Fe layered double hydroxides (Ni-Fe LDHs) for oxygen-evolution reaction (OER). Herein, we show that a dendrimer with carboxylate surface groups (generation 3.5) could react with Ni(II) ions to form a precatalyst for OER. During electrochemical OER, this precatalyst converted to Ni-Fe LDH, which is an efficient catalyst toward OER in the presence of Fe(III) ions. The catalyst was characterized by a number of methods and applied for OER using fluorine-doped tin oxide (FTO), Au, Pt, Ni foam, and glassy carbon electrodes. The catalyst shows a current density of 100 mA/cm² on the surface of the Ni foam, using only 297 mV overpotential and with the Tafel slope of 60.8 mV/decade. A current density of 50 mA/cm² on the surface of Au or Pt requires 333 and 317 mV overpotentials, respectively. The slopes of the Tafel plots for the catalyst on Au, GC, and Pt are 52.5, 47.1, and 37.4 mV/decade, respectively. The dendrimer resulted in a large dispersibility and an increase in active sites of Ni-Fe LDH, as well as the formation of Ni-Fe LDH.

Designing MOF Nanoarchitectures for Electrochemical Water Splitting

Electrochemical water splitting has attracted significant attention as a key pathway for the development of renewable energy systems. Fabricating efficient electrocatalysts for these processes is intensely desired to reduce their overpotentials and facilitate practical applications. Recently, metal-organic framework (MOF) nanoarchitectures featuring ultrahigh surface areas, tunable nanostructures, and excellent porosities have emerged as promising materials for the development of highly active catalysts for electrochemical water splitting. Herein, the most pivotal advances in recent research on engineering MOF nanoarchitectures for efficient electrochemical water splitting are presented. First, the design of catalytic centers for MOF-based/derived electrocatalysts is summarized and compared from the aspects of chemical composition optimization and structural functionalization at the atomic and molecular levels. Subsequently, the fast-growing breakthroughs in catalytic activities, identification of highly active sites, and fundamental mechanisms are thoroughly discussed. Finally, a comprehensive commentary on the current primary challenges and future perspectives in water splitting and its commercialization for hydrogen production is provided. Hereby, new insights into the synthetic principles and electrocatalysis for designing MOF nanoarchitectures for the practical utilization of water splitting are offered, thus further promoting their future prosperity for a wide range of applications.

In situ assembly of bimetallic MOF composites on IF as efficient electrocatalysts for the oxygen evolution reaction

Since the complicated multiple electron transfer process and slow kinetics in the OER process seriously hinder the electrochemical decomposition of water, it is urgent to design and develop electrocatalysts with excellent performance and superior stability to reduce overpotential and accelerate the reaction dynamics of the OER. Herein, a unique ultra-thin nanosheet bimetal electrocatalyst NiFe-MOF/IF was synthesized by a one-step hydrothermal method, and characterized by SEM, XRD, TEM, and XPS. NiFe-MOF/IF shows superior OER electrocatalytic activity in 1 M KOH electrolyte solution, and an ultralow overpotential of only 230 and 262 mV was required to achieve a current density of 10 and 100 mA cm^-2, respectively, with a relatively small Tafel slope of 30.46 mV dec^-1 for the OER. No obvious degradation of the current density at 10 mA cm^-2 was observed over about 16 h, which indicates the excellent stability of the catalyst. Favourable activity and benign durability of NiFe-MOF/IF can be attributed to the three-dimensional high porosity conductive substrates, in situ growth of MOF nanosheets, bimetallic synergy, and unique layering. This research provides a promising strategy for the application of MOF materials in the field of electrocatalysis.