Multiconfigurational photodynamics simulations reveal the mechanism of photodecarbonylations of cyclopropenones in explicit aqueous environments

Gas-evolving photochemical reactions use light and mild conditions to access strained organic compounds irreversibly. Cyclopropenones are a class of light-responsive molecules used in bioorthogonal photoclick reactions; their excited-state decarbonylation reaction mechanisms are misunderstood due to their ultrafast (<100 femtosecond) lifetimes. We have combined multiconfigurational quantum mechanical (QM) calculations and non-adiabatic molecular dynamics (NAMD) simulations to uncover the excited-state mechanism of cyclopropenone and a photoprotected cyclooctyne-(COT)-precursor in gaseous and explicit aqueous environments. We explore the role of H-bonding with fully quantum mechanical explicitly solvated NAMD simulations for the decarbonylation reaction. The cyclopropenones pass through asynchronous conical intersections and have dynamically concerted photodecarbonylation mechanisms. The COT-precursor has a higher quantum yield of 55% than cyclopropenone (28%) because these trajectories prefer to break a σCC bond to avoid the strained trans-cyclooctene geometries. Our solvated simulations show an increased quantum yield (58%) for the systems studied here.

The Synergistic Effects between Liquid Crystal and Crystalline Phase on Photo-Responsive Elastomers toward Quick Photo-Responsive Performance

Adopting only a small amount of azobenzene molecular to design liquid crystal photo-responsive materials capable of quick response and flexible adjustability is in high demand but is challenging. Herein, azobenzenemolecules into polyurethane elastomer containing crystalline structure for preparing azobenzene liquid-crystal elastomers (ALCEs) are demonstrated and this phenomenon of the synergistic effects between liquid crystal and crystalline phase is discovered. The key point of the work is that the synthetic ALCEs can utilize the reversible isomerism capability of azobenzene molecules under light irradiation, which can pry the motion of the macromolecular crystalline region in system to realize the large macroscopic deformation of the photo-responsive behavior. Obviously, the ALCEs sample containing azobenzene molecule and polyethylene glycol crystallization can quickly bend, illuminated by ultraviolet light and rapidly straighten under green light. Under the same ultraviolet irradiation, the bending speed, final bending angle, recovery rate and recovery ratio of ALCEs are larger than that of ALCEs without any crystalline structure. This ALCEs based on the synergistic effects between liquid crystal and crystalline phase can break through the current dilemma that the application of traditional azobenzene photo-responsive materials is limited by their concentration, greatly expanding the design thought and their scope of application.

Photoliquefiable Azobenzene Surfactants toward Solar Thermal Fuels that Upgrade Photon Energy Storage via Molecular Design

Photoresponsive phase change materials (PPCMs) are capable of storing photon and heat energy simultaneously and releasing the stored energy as heat in a controllable way. While, the azobenzene-based PPCMs exhibit a contradiction between gravimetric energy storage density and photoinduced phase change. Here, a type of azobenzene surfactants with balance between molecular free volume and intermolecular interaction is designed in molecular level, which can address the coharvest of photon energy and low-grade heat energy at room temperature. Such PPCMs gain the total gravimetric energy density up to 131.18 J g^-1 by charging solid sample and 160.50 J g^-1 by charging solution. Notably, the molar isomerization enthalpy upgrades by a factor of up to 2.4 compared to azobenzene. The working mechanism is explained by the computational studies. All the stored energy can release out as heat under Vis light, causing a fast surface temperature rise. This study demonstrates a new molecular designing strategy for developing azobenzene-based PPCMs with high gravimetric energy density by improving the photon energy storage.

Sterically Hindered Stiff-Stilbene Photoswitch Offers Large Motions, 90% Two-Way Photoisomerization, and High Thermal Stability

Molecular photoswitches have been widely used as molecular machines in various fields due to the small structures and simple motions generated in reversible isomerization. However, common photoswitches, as represented by azobenzene (AB), cannot combine both large motions and high thermal stability, which are critically important for some practical applications in addition to high photoisomerization yields. Here, we focus on a promising photoswitch, stiff stilbene (SS), and its derivative, sterically hindered SS (HSS). The detailed investigation of their performance with a comparison to AB demonstrated that HSS is an outstanding photoswitch offering larger motions than AB and SS, ca. 90% photoisomerization in both E-to-Z and Z-to-E directions, and significantly high thermal stability with a half-life of ca. 1000 years at room temperature. The superior performance of HSS promises its use in various applications, even where previous photoswitches have troubles and are unavailable.

Photoswitches with different numbers of azo chromophores for molecular solar thermal storage

We investigate three azo-chromophore-containing photoswitches (1, 2 and 3) for molecular solar thermal storage (MOST) based on reversible Z-E isomerization. 1, 2 and 3 are photoswitchable compounds that contain one, two and three azo chromophores, respectively. In solution, 1, 2 and 3 were charged via UV-light-induced E-to-Z isomerization. Among these three compounds, 2 exhibited an energy density as high as 272 ± 1.8 J g^-1, which showed the best energy storage performance. This result originated from the low molecular weight, a high degree of photoisomerization, and moderate steric hindrance of 2, which demonstrated the advantages of the meta-bisazobenzene structure for MOST. In addition, we studied the performances of these photoswitches in the solvent-free state. Only 1 showed photoinduced reversible solid-to-liquid transitions, which enabled the charging of 1 in a solvent-free state. The stored energy density for 1 in a solvent-free state was 237 ± 1.5 J g^-1. By contrast, 2 and 3 could not be charged in the solvent-free state due to the lack of solid-state photoisomerization. Our findings provide a better understanding of the structure-performance relationship for azobenzenebased MOST and pave the way for the development of high-density solar thermal fuels.

Light-Responsive Solid-Solid Phase Change Materials for Photon and Thermal Energy Storage

We report a series of adamantane-functionalized azobenzenes that store photon and thermal energy via reversible photoisomerization in the solid state for molecular solar thermal (MOST) energy storage. The adamantane unit serves as a 3D molecular separator that enables the spatial separation of azobenzene groups and results in their facile switching even in the crystalline phase. Upon isomerization, the phase transition from crystalline to amorphous solid occurs and contributes to additional energy storage. The exclusively solid-state MOST compounds with solid-solid phase transition overcome a major challenge of solid-liquid phase transition materials that require encapsulation for practical applications.

Molecular Solar Thermal Systems towards Phase Change and Visible Light Photon Energy Storage

Molecular solar thermal (MOST) systems have attracted tremendous attention for solar energy conversion and storage, which can generate high-energy metastable isomers upon capturing photon energy, and release the stored energy as heat on demand during back conversion. However, the pristine molecular photoswitches are limited by low storage energy density and UV light photon energy storage. Recently, numerous pioneering works have been focused on the development of MOST systems towards phase change (PC) and visible light photon energy storage to increase their properties. On the one hand, the strategy of simultaneously capturing isomerization enthalpy and PC energy between solid and liquid can not only offer high latent heat, but also promote the development of sustainable energy systems. On the other hand, the efficient photon energy storage in the visible light range opens a tremendously fascinating avenue to fabricate MOST systems powered under natural sunlight. Here, the recent advances of MOST systems towards PC and visible light photon energy storage are systematically summarized, the most promising advantages and current challenges are analyzed, and emerging strategies and future research directions are proposed.

Design of phase-transition molecular solar thermal energy storage compounds: compact molecules with high energy densities

A series of compact azobenzene derivatives were investigated as phase-transition molecular solar thermal energy storage compounds that exhibit maximum energy storage densities around 300 J g^-1. The relative size and polarity of the functional groups on azobenzene were manifested to significantly influence the phase of isomers and their energy storage capacity.

Effect of Transition Metal Substitution on the Flexibility and Thermal Properties of MOF-Based Solid-Solid Phase Change Materials

A series of azobenzene-loaded metal-organic frameworks were synthesized with the general formula M₂(BDC)₂(DABCO)(AB)_x (M = Zn, Co, Ni, and Cu; BDC = 1,4-benzenedicarboxylate; DABCO = 1,4-diazabicyclo[2.2.2]octane; and AB = azobenzene), herein named M-1⊃AB_x. Upon occlusion of AB, each framework undergoes guest-induced breathing, whereby the pores contract around the AB molecules forming a narrow-pore (np) framework. The loading level of the framework is found to be very sensitive to the synthetic protocol and although the stable loading level is close to M-1⊃AB_1.0, higher loading levels can be achieved for the Zn, Co, and Ni frameworks prior to vacuum treatment, with a maximum composition for the Zn framework of Zn-1⊃AB_1.3. The degree of pore contraction upon loading is modulated by the inherent flexibility of the metal-carboxylate paddlewheel unit in the framework, with the Zn-1⊃AB_1.0 showing the biggest contraction of 6.2% and the more rigid Cu-1⊃AB_1.0 contracting by only 1.7%. Upon heating, each composite shows a temperature-induced phase transition to an open-pore (op) framework, and the enthalpy and onset temperatures of the phase transition are affected by the framework flexibility. For all composites, UV irradiation causes trans → cis isomerization of the occluded AB molecules. The population of cis-AB at the photostationary state and the thermal stability of the occluded cis-AB molecules are also found to correlate with the flexibility of the framework. Over a full heating-cooling cycle between 0 and 200 °C, the energy stored within the metastable cis-AB molecules is released as heat, with a maximum energy density of 28.9 J g^-1 for Zn-1⊃AB_1.0. These findings suggest that controlled confinement of photoswitches within flexible frameworks is a potential strategy for the development of solid-solid phase change materials for energy storage.

Arylazopyrazole-Based Dendrimer Solar Thermal Fuels: Stable Visible Light Storage and Controllable Heat Release

Solar thermal fuels offer a closed cycle and a renewable energy storage strategy by harvesting photon energy within the chemical conformations of molecules and retrieving energy by an induced release of heat. However, the majority of reports are limited to the ultraviolet light storage, which potentially interferes with the surrounding environment and reduces the material lifetime. Here, we present a novel arylazopyrazole (AAP)-containing dendrimer that not only addresses the hindrance of visible light storage for solar thermal fuels but also exhibits outstanding performances of abundant energy conversion and stable storage, which are attributed to the substantial absorbance in visible wavelengths of para-thiomethyl-substituted AAP groups and the stability of cis isomers, respectively. The energy density of the dendrimer fuel after efficiently harvesting blue light (405 nm) is as high as 0.14 MJ kg^-1 (67 kJ mol^-1), and the storage half-life of the fabricated dendrimer film can reach up to 12.9 days. Moreover, the heat release of the dendrimer film can be triggered by different stimuli (light and heat). The dendrimer film displays a 6.5 °C temperature difference between trans isomers and cis isomers during green light irradiation. Our work provides a fascinating avenue to fabricate visible light storage solar thermal fuels and unlocks the possibility of developing natural sunlight storage in the future.

Solar-Thermal Energy Conversion and Storage Using Photoresponsive Azobenzene-Containing Polymers

Photoswitchable compounds are promising materials for solar-thermal energy conversion and storage. In particular, photoresponsive azobenzene-containing compounds are proposed as materials for solar-thermal fuels. In this feature article, solar-thermal fuels based on azobenzene-containing polymers (azopolymers) are reviewed. The mechanism of azopolymer-based solar-thermal fuels is introduced, and computer simulations and experimental results on azopolymer-based solar-thermal fuels are highlighted. Different types of azopolymers such as linear azopolymers, 2D azopolymers, and conjugated azopolymers are addressed. The advantages and limitations of these azopolymers for solar-thermal energy conversion and storage, along with the remaining challenges of azopolymer-based solar-thermal fuels, are discussed.

Photoinduced Reversible Solid-to-Liquid Transitions for Photoswitchable Materials

Heating and cooling can induce reversible solid-to-liquid transitions of matter. In contrast, athermal photochemical processes can induce reversible solid-to-liquid transitions of some newly developed azobenzene compounds. Azobenzene is photoswitchable. UV light induces trans-to-cis isomerization; visible light or heat induces cis-to-trans isomerization. Trans and cis isomers usually have different melting points (T_m ) or glass transition temperatures (T_g ). If T_m or T_g of an azobenzene compound in trans and cis forms are above and below room temperature, respectively, light may induce reversible solid-to-liquid transitions. In this Review, we introduce azobenzene compounds that exhibit photoinduced reversible solid-to-liquid transitions, discuss the mechanisms and design principles, and show their potential applications in healable coatings, adhesives, transfer printing, lithography, actuators, fuels, and gas separation. Finally, we discuss remaining challenges in this field.

Excellent Temperature-Control Based on Reversible Thermochromic Materials for Light-Driven Phase Change Materials System

Light-driven phase change materials (PCMs) have received significant attention due to their capacity to convert visible light into thermal energy, storing it as latent heat. However, continuous photo-thermal conversion can cause the PCMs to reach high thermal equilibrium temperatures after phase transition. In our study, a novel light-driven phase change material system with temperature-control properties was constructed using a thermochromic compound. Thermochromic phase change materials (TC-PCMs) were prepared by introducing 2-anilino-6-dibutylamino-3-methylfluoran (ODB-2) and bisphenol A (BPA) into 1-hexadecanol (1-HD) in various proportions. Photo-thermal conversion performance was investigated with solar radiation (low power of 0.09 W/cm²) and a xenon lamp (at a high power of 0.14 W/cm²). The TC-PCMs showed a low equilibrium temperature due to variations in absorbance. Specifically, the temperature of TC-PCM₁₈₀ (ODB-2, bisphenol A and 1-HD ratio 1:2:180) could stabilize at 54 °C approximately. TC-PCMs exhibited reversibility and repeatability after 20 irradiation and cooling cycles.

Light-triggered thermal conductivity switching in azobenzene polymers

Materials that can be switched between low and high thermal conductivity states would advance the control and conversion of thermal energy. Employing in situ time-domain thermoreflectance (TDTR) and in situ synchrotron X-ray scattering, we report a reversible, light-responsive azobenzene polymer that switches between high (0.35 W m-1 K-1) and low thermal conductivity (0.10 W m-1 K-1) states. This threefold change in the thermal conductivity is achieved by modulation of chain alignment resulted from the conformational transition between planar (trans) and nonplanar (cis) azobenzene groups under UV and green light illumination. This conformational transition leads to changes in the π-π stacking geometry and drives the crystal-to-liquid transition, which is fully reversible and occurs on a time scale of tens of seconds at room temperature. This result demonstrates an effective control of the thermophysical properties of polymers by modulating interchain π-π networks by light.