A defect-enriched PdMo bimetallene for ethanol oxidation reaction and 4-nitrophenol reduction

A defect-enriched PdMo bimetallene (d-PdMo) was prepared by a one-pot wet chemical reaction followed by post-treatment of oxidative etching. The introduction of defects can tailor the electronic structure of PdMo bimetallene and the prepared d-PdMo bimetallene exhibited excellent performance in the ethanol oxidation reaction (EOR) and 4-nitrophenol (4-NP) reduction reaction.

Design and Mechanism Insight of Monodispersed AuCuPt Alloy Nanozyme with Antitumor Activity

The abrogation of the self-adaptive redox evolution of tumors is promising for improving therapeutic outcomes. In this study, we designed a trimetallic alloy nanozyme AuCuPt-PpIX (ACPP), which mimics up to five naturally occurring enzymes: glucose oxidase (GOD), superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and glutathione peroxidase (GPx). Facilitated by these enzyme-mimicking traits, the constructed ACPP nanozymes can not only disrupt the established redox homeostasis in tumors through a series of enzymatic cascade reactions but also achieve cyclic regeneration of the relevant enzyme substrates. Density functional theory (DFT) calculations have theoretically explained the synergistic effect of multimetallic doping and the possible mechanism of enzymatic catalysis. The doped Cu and Pt sites are conducive to the adsorption, activation, and dissociation of reactant molecules, whereas the Au sites are conducive to desorption, which significantly improves catalytic efficiency via a synergistic effect. Additionally, ACPP nanozymes can improve the effect of protoporphyrin (PpIX)-enabled sonodynamic therapy (SDT) by alleviating hypoxia and initiating ferroptosis by inducing lipid peroxidation (LPO) and inhibiting GPX4 activity, thus achieving multimodal synergistic therapy. This study presents a typical paradigm to enable the use of multimetallic alloy nanozymes for the treatment of tumor cells with self-adaptive properties.

Galvanic Replacement Reaction: Enabling the Creation of Active Catalytic Structures

The galvanic replacement reaction (GRR) is recognized as a redox process where one metal undergoes oxidation by the ions of another metal possessing a higher reduction potential. This reaction takes place at the interface between a substrate and a solution containing metal ions. Utilizing metal or metal oxide as sacrificial templates enables the synthesis of metallic nanoparticles, oxide-metal composites, and mixed oxides through GRR. Growing evidence showed that GRR has a direct impact on surface structures and properties. This has generated significant interest in catalysis and opened up new horizons for the application of GRR in energy and chemical transformations. This review provides a comprehensive overview of the synthetic strategies utilizing GRR for the creation of catalytically active structures. It discusses the formation of alloys, intermetallic compounds, single atom alloys, metal-oxide composites, and mixed metal oxides with diverse nanostructures. Additionally, GRR serves as a postsynthesis method to modulate metal-oxide interfaces through the replacement of oxide domains. The review also outlines potential future directions in this field.

Preparation of Ni@Pd Core-Shell Nanoparticles Supported on KIT-6 by Ultrasound-Assisted Galvanic Replacement for Dodecahydro-N-ethylcarbazole Dehydrogenation

Using Ni as a template and reductant, Ni core-Pd shell nanoparticles (Ni@Pd NPs) supported on KIT-6 (Ni@Pd/K6) were prepared by a galvanic replacement reaction under ultrasonic radiation. The characterization results show that the Ni@Pd core-shell NPs with an average diameter of 1.9 ± 0.3 nm are uniformly dispersed on KIT-6. The d-band center position of Pd in Ni@Pd core-shell NPs can be affected by both ligand and strain effects. The relationship between the d-band center of Pd and the selectivity of intermediates is a nearly straight curve. The dehydrogenation efficiency of dodecahydro-N-ethylcarbazole on Ni@Pd(6:1)/K6 is 100% only for 3 h at 180 °C and 95.5% for 6 h at 160 °C, which is better than the reported catalysts. The outstanding catalytic dehydrogenation performance of Ni@Pd(6:1)/K6 can be attributed to the synergistic effect of the ligand and strain effect, the high dispersion of core-shell NPs, and the weak H2 binding ability of the catalyst.

Reaction stoichiometry directs the architecture of trimetallic nanostructures produced via galvanic replacement

Galvanic replacement (GR) of monometallic nanoparticles (NPs) provides a versatile route to interesting bimetallic nanostructures, with examples such as nanoboxes, nanocages, nanoshells, nanorings, and heterodimers reported. The replacement of bimetallic templates by a more noble metal can generate trimetallic nanostructures with different architectures, where the specific structure has been shown to depend on the relative reduction potentials of the participating metals and lattice mismatch between the depositing and template metal phases. Now, the role of reaction stoichiometry is shown to direct the overall architecture of multimetallic nanostructures produced by GR with bimetallic templates. Specifically, the number of initial metal islands deposited on a NP template depends on the reaction stoichiometry. This outcome was established by studying the GR process between intermetallic PdCu (i-PdCu) NPs and either AuCl₂^- (Au¹⁺) or AuCl₄^- (Au³⁺), producing i-PdCu-Au heterostructures. Significantly, multiple Au domains form in the case of GR with AuCl₂^- while only single Au domains form in the case of AuCl₄^-. These different NP architectures and their connection to reaction stoichiometry are consistent with Stranski-Krastanov (SK) growth, providing general guidelines on how the conditions of GR processes can be used to achieve multimetallic nanostructures with different defined architectures.

Green Synthesis of Au-NPs on g-C3N4 Hybrid Nanomaterials Based on Supramolecular Pillar[6]arene and Its Applications for Catalysis

Gold nanoparticles (Au NPs) are installed in situ on the surfaces of graphitic carbon nitride (g-C₃N₄) based on supramolecular hydroxylatopillar[6]arene (P6). The Au NPs can be obtained via the redox reaction between HAuCl₄ and P6 without any NH₂-NH₂, NaBH₄, and other reductants, where AuCl₄ ^- is reduced to Au⁰ by the -OH groups in the presence of OH^-, and the -OH groups are oxidized into -COOH. First, P6 is loaded onto the surface of g-C₃N₄ via π-π interaction between P6 and g-C₃N₄, which offers a stabilized and reduced site for in situ anchoring of Au NPs. The hybrid nanomaterial Au-NPs@P6@g-C₃N₄ exhibits higher catalytic capability than the Pd/C catalyst in 4-nitrophenol (4-NP) reduction and methylene blue degradation, which opens a new avenue for designing more efficient hybrid nanomaterials for application in catalysis, sensing, and other fields.

Heterogeneous Trimetallic Nanoparticles as Catalysts

The development and application of trimetallic nanoparticles continues to accelerate rapidly as a result of advances in materials design, synthetic control, and reaction characterization. Following the technological successes of multicomponent materials in automotive exhausts and photovoltaics, synergistic effects are now accessible through the careful preparation of multielement particles, presenting exciting opportunities in the field of catalysis. In this review, we explore the methods currently used in the design, synthesis, analysis, and application of trimetallic nanoparticles across both the experimental and computational realms and provide a critical perspective on the emergent field of trimetallic nanocatalysts. Trimetallic nanoparticles are typically supported on high-surface-area metal oxides for catalytic applications, synthesized via preparative conditions that are comparable to those applied for mono- and bimetallic nanoparticles. However, controlled elemental segregation and subsequent characterization remain challenging because of the heterogeneous nature of the systems. The multielement composition exhibits beneficial synergy for important oxidation, dehydrogenation, and hydrogenation reactions; in some cases, this is realized through higher selectivity, while activity improvements are also observed. However, challenges related to identifying and harnessing influential characteristics for maximum productivity remain. Computation provides support for the experimental endeavors, for example in electrocatalysis, and a clear need is identified for the marriage of simulation, with respect to both combinatorial element screening and optimal reaction design, to experiment in order to maximize productivity from this nascent field. Clear challenges remain with respect to identifying, making, and applying trimetallic catalysts efficiently, but the foundations are now visible, and the outlook is strong for this exciting chemical field.

A hydroxy-containing three dimensional covalent organic framework bearing silver nanoparticles for reduction of 4-nitrophenol and degradation of organic dyes

A hydroxy-containing three dimensional covalent organic framework bearing Ag nanoparticles for catalytic reduction of 4-nitrophenol and degradation of methylene blue and Congo red.

Synthesis and potential applications of trimetallic nanostructures

The present review highlights the synthetic strategies and potential applications of TMNs for organic reactions, environmental remediation, and health-related activities.

Facile Synthesis of PdCuRu Porous Nanoplates as Highly Efficient Electrocatalysts for Hydrogen Evolution Reaction in Alkaline Medium

Ru is a key component of electrocatalysts for hydrogen evolution reaction (HER), especially in alkaline media. However, the catalytic activity and durability of Ru-based HER electrocatalysts are still far from satisfactory. Here we report a solvothermal approach for the synthesis of PdCuRu porous nanoplates with different Ru compositions by using Pd nanoplates as the seeds. The PdCuRu porous nanoplates were formed through underpotential deposition (UPD) of Cu on Pd, followed by alloying Cu with Pd through interdiffusion and galvanic replacement between Cu atoms and Ru precursor simultaneously. When evaluated as HER electrocatalysts, the PdCuRu porous nanoplates exhibited excellent catalytic activity and durability. Of them, the Pd24Cu29Ru47/C achieved the lowest overpotential (40.7 mV) and smallest Tafel slope (37.5 mV dec−1) in an alkaline solution (much better than commercial Pt/C). In addition, the Pd24Cu29Ru47/C only lost 17% of its current density during a stability test for 10 h, while commercial Pt/C had a 59.5% drop under the same conditions. We believe that the electron coupling between three metals, unique porous structure, and strong capability of Ru for water dissociation are responsible for such an enhancement in HER performance.

Deciphering the Kinetic Study of Sodium Dodecyl Sulfate on Ag Nanoparticle Synthesis Using Cassia siamea Flower Extract as a Reducing Agent

Silver nanoparticles (Ag NPs) were synthesized using Cassia siamea flower petal extract (CSFE) as a reducing agent for the first time. In its presence and absence, the correlative effects of the anionic surface-active agent sodium dodecyl sulfate (SDS) were studied with respect to the development and texture of Ag NPs. Under different reagent compositions, the Ag NPs were inferred by localized surface plasmon resonance peaks between 419 and 455 nm. In the absence of SDS, there was a small eminence at 290 and around 350 nm, pointing toward the possibility of irregular polytope Ag NPs, which was confirmed in the transmission electron microscopy images. This elevation vanished beyond the cmc of [SDS], resulting in spherical and oval shaped Ag NPs. The effects of reagent concentrations were studied at 25 °C and around 7 and 9 pH in the absence and presence of SDS, respectively. Also, kinetic studies were performed by UV-visible spectrophotometry. Prodigious effects on shape and size were found under different synthesis conditions in terms of hexagonal, rod-, irregular-, and spherical shaped Ag NPs. Furthermore, the antimycotic activity of the synthesized Ag NPs was established on different Candida strains, and best results were found pertaining Candida tropicalis. The ensuing study impels the control of texture and dispersity for Ag NPs by CSFE and SDS, and the resultant polytope Ag NPs could be a future solution for drug-resistant pathogenic fungi.

Precisely tuning the electronic structure of a structurally ordered PtCoFe alloy via a dual-component promoter strategy for oxygen reduction

Optimizing the electronic structure of Pt-based alloys has emerged as an effective strategy to further improve their catalytic oxygen reduction reaction (ORR) performance, yet this remains challenging. Here, we have successfully tuned the electronic structure of ordered PtCoFe nanoparticles by incorporating the third component (Fe) into a bimetallic ordered PtCo alloy and manipulating its content. With the merits of the optimum electronic structure and the favorable composition, as well as the robust ordered structure, the as-prepared ordered PtCoFe-1-0.6 alloy (1 and 0.6 represent the feeding molar ratio of Co to Pt and Fe to Pt, respectively) exhibits enhanced catalytic performance for ORR. The L10-PtCoFe-1-0.6 alloy delivers higher specific activity (2.23 mA cm-2) than bimetallic L10-PtCo-1 (1.34 mA cm-2) and the commercial Pt/C (0.23 mA cm-2) catalyst. Indeed, this dual-catalytic-component promoter strategy gives a significant insight into developing high-performance homogeneous catalysts.

Intriguing hierarchical Co@NC microflowers in situ assembled by nanoneedles: Towards enhanced reduction of nitroaromatic compounds via interfacial synergistic catalysis

Developing highly efficient and cost-effective catalyst with tuned microstructure holds great promise in the reduction of nitroaromatic compounds under mild reaction conditions. Herein, we report a new Co@NC-MF catalyst with a fascinating hierarchical flower-like architecture in situ assembled from uniform Co@NC nanoneedles, which can function as a favorable platform for the efficient reduction of nitroaromatic compounds in the presence of NaBH₄. In addition with the structural advantage, the characterization and experimental results demonstrate the enormous advantage of interfacial synergistic catalysis in enhancing the catalytic performance. The outside electron-rich N-doped carbon layer as Lewis basic sites and the inside Co nanoparticles are responsible for the adsorption of 4-nitrophenol (4-NP) and generation of active hydrogen species, respectively. This work contributes to the construction of well-integrated composites with well-balanced interface synergy to boost the catalytic performance in various heterogeneous reactions.

Bismuth-induced synthesis of Au-X (X = Pt, Pd) nanoalloys for electrocatalytic reactions

Bismuth was introduced as an intermediate to produce Au-X (X = Pt and Pd) bimetallic nanoalloys using the galvanic replacement reaction. The results showed that the Au-X nanoalloys have good activity for electrocatalytic reactions in alkaline media. This strategy can provide an option for the formation of multimetal nanoalloys with similar electrochemical potentials and compositions.

Heterometallic Seed-Mediated Growth of Monodisperse Colloidal Copper Nanorods with Widely Tunable Plasmonic Resonances

We report a heterometallic seed-mediated synthesis method for monodisperse penta-twinned Cu nanorods using Au nanocrystals as seeds. Elemental analyses indicate that resultant nanorods consist predominantly of copper with a gold content typically below 3 atom %. The nanorod aspect ratio can be readily adjusted from 2.8 to 13.1 by varying the molar ratio between Au seeds and Cu precursor, resulting in narrow longitudinal plasmon resonances tunable from 762 to 2201 nm. Studies of reaction intermediates reveal that symmetry-breaking is promoted by rapid nanoscale diffusion in Au-Cu alloys and the formation of a gold-rich surface. The growth pathway features coevolving shape and composition whereby nanocrystals become progressively enriched with Cu concomitant with nanorod growth. The availability of uniform colloidal Cu nanorods with widely tunable aspect ratios opens new avenues toward the synthesis of derivative one-dimensional metal nanostructures, and applications in surface-enhanced spectroscopy, bioimaging, and electrocatalysis, among others.

X (metal: Al, Cu, Sn, Ti)-functionalized tunable 2D-MoS2 nanostructure assembled biosensor arrays for qualitative and quantitative analysis of vital neurological drugs

In this work we report for the first time surface functionalization of 2D MoS2 with X (metals: Al, Cu, Sn, Ti) to develop a low-cost, ultra-selective biosensor array based Electronic Tongue (E-Tongue) for the detection of 4 vital neurological drugs in human saliva. The hydrothermally grown surface functionalized X-MoS2 was integrated onto a single 1 × 1 cm aluminium foil and contacts were defined using Cr electrodes. Detailed characterization revealed the formation of 2-H MoS2 and metal-X (Al, Cu, Sn, Ti)-functionalized MoS2 nanoflower like morphology decorated with nanoflake, nanorod, nanocube and nanostick structures, respectively. The response of the sensor array was recorded for aspirin, nicotine, caffeine and tramadol. Principal Component Analysis (PCA) was performed to reduce the dimension of numerous response data sets from all sensors and predict the likely possible response from various neurological drugs towards each sensor. Pattern-recognition analysis confirmed a definite pattern in response to respective functionalization and could efficiently differentiate neurological drugs from one another. Real-time analysis was performed using saliva samples for monitoring the therapeutic neurological drug concentration in the human body. Furthermore, the biosensor array was exposed to respective neurological drugs to study their sensitivity, selectivity, stability, reproducibility and adhesion onto the device. The strategy outlined can be used to develop lab-on-a-chip devices for the real-time detection of numerous bioanalytes in body fluids.

Hematite/M (M = Au, Pd) Catalysts Derived from a Double-Hollow Prussian Blue Microstructure: Simultaneous Catalytic Reduction of o- and p-Nitrophenols

Present study deals with hematite/M (M = Au, Pd) catalysts converted from a double-hollow Prussian blue microstructure (DHPM). The unique Prussian blue (PB) microstructure (MS) is prepared by a template-free solvothermal synthetic route in a single-step reaction. An amine-functionalized silicate sol-gel matrix (SSG) has served as the structure-directing agent cum stabilizer for making DHPM. Synthesized DHPM is having a unique structure: a hollow core and an in situ etched porous surface. Growth mechanism is explored and revealed by analyzing several experimental parameters such as HCl concentration, Fe source, effect of the added EtOH, silane concentration, and role of silanes' amine groups. It is identified that the superstructure consisted of well-aligned PB cubes growing radially from the core of the superstructure. Metal (Au and Pd) nanoparticles (NPs) are deposited on both interior and exterior of the PB MS through galvanic displacement reaction, and thus metal NP-loaded hematite phase iron oxide (α-Fe₂O₃) nanomaterials were derived by annealing them in air. Catalytic activities of the hematite/M(M = Au, Pd) MS are investigated toward simultaneous catalytic reduction of o-nitrophenol and p-nitrophenol. The resultant hematite/Pd MS showed high structural stability and catalytic active sites than the hematite/Au MS, which enhances the catalytic properties for the simultaneous catalytic reduction of both nitrophenols.

Facile Aqueous-Phase Synthesis of Bimetallic (AgPt, AgPd, and CuPt) and Trimetallic (AgCuPt) Nanoparticles

Multi-metallic nanoparticles continue to attract attention, due to their great potential in various applications. In this paper, we report a facile aqueous-phase synthesis for multi-metallic nanoparticles, including AgPt, AgPd, CuPt, and AgCuPt, by a co-reduction method within a short reaction time of 10 min. The atomic ratio of bimetallic nanoparticles was easily controlled by varying the ratio of each precursor. In addition, we found that AgCuPt trimetallic nanoparticles had a core-shell structure with an Ag core and CuPt shell.

Nanofabrication of hollowed-out Au@AgPt core-frames via selective carving of silver and deposition of platinum

Nanofabrication of a hollowed-out Au@AgPt core-frame is presented, which is based on the selective deposition of Pt atoms on the active edges of the cubes and dissolution of Ag atoms from the {100} facets.

A recyclable heterogeneous nanocatalyst of copper-grafted natural asphalt sulfonate (NAS@Cu): characterization, synthesis and application in the Suzuki–Miyaura coupling reaction

NAS@Cu has synthesis simplicity given the availability of natural materials and has advantages such as being eco-friendly, high reactivity and recyclability.

Borohydride stabilized gold-silver bimetallic nanocatalysts for highly efficient 4-nitrophenol reduction

Bimetallic Au _x Ag_1-x nanoparticles, prepared using sodium borohydride as the sole reducing and capping agent for various NaBH₄ : metal molar ratios, were investigated as catalysts for 4-nitrophenol reduction. This approach yielded the highest catalytic activities observed for this model reaction to date.