By Introducing Multiple Hydrogen Bonds Endows MOF Electrodes with an Enhanced Structural Stability

Recently, metal-organic frameworks (MOFs) have attracted great interest in energy storage areas. However, the poor structural stability of MOFs derived from weak coordination bonds limits their applications. Here, quadruple hydrogen bonds (H-bonds) were introduced onto the MOFs to enhance their structural stability. Cross-linked networks could be formed between molecules owing to multiple H-bonds, strengthening the framework stability. Moreover, the dynamic reversibility of H-bonds could endow MOFs with self-healing ability. Furthermore, due to lower binding energy compared to coordination bonds, H-bonds break preferentially when subjected to internal stress, thus protecting the MOFs. Consequently, the as-prepared self-healing hybrid (SHH-Cu-MOF@Ti3C2TX) exhibited high capacitance retention (89.4%) after 5000 cycles at 1 A g-1, while that hybrid without dynamic H-bonds (H-Cu-MOF@Ti3C2TX) presented a 79.9% retention, delivering an enhancement in cycling stability. Moreover, an asymmetric supercapacitor (ASC) was fabricated by employing SHH-Cu-MOF@Ti3C2TX and activated carbon (AC) as the electrodes. The ASC delivered a specific capacitance (47.4 F g-1 at 1 A g-1), an energy density (16.9 Wh kg-1), and a power density (800 W kg-1) as well as good rate ability (retains 81% of its initial capacitance from 0.2 A g-1 to 5 A g-1).

"Hard" Emulsion-Induced Interface Super-Assembly: A General Strategy for Two-Dimensional Hierarchically Porous Metal-Organic Framework Nanoarchitectures

Two-dimensional (2D) hierarchically porous metal-organic framework (MOF) nanoarchitectures with tailorable meso-/macropores hold great promise for enhancing mass transfer kinetics, augmenting accessible active sites, and thereby boosting performance in heterogeneous catalysis. However, achieving the general synthesis of 2D free-standing MOF nanosheets with controllable hierarchical porosity and thickness remains a challenging task. Herein, we present an ingenious "hard" emulsion-induced interface super-assembly strategy for preparing 2D hierarchically porous UiO-66-NH2 nanosheets with highly accessible pore channels, tunable meso-/macropore sizes, and adjustable thicknesses. The methodology relies on transforming the geometric shape of oil droplet templates within appropriate oil-in-water emulsions from conventional zero-dimensional (0D) "soft" liquid spheres to 2D "hard" solid sheets below the oil's melting/freezing point. Subsequent surfactant exchange on the surface of 2D "hard" emulsions facilitates the heterogeneous nucleation and interfacial super-assembly of in situ formed mesostructured MOF nanocomposites, serving as structural units, in a loosely packed manner to produce 2D MOF nanosheets with multimodal micro/meso-/macroporous systems. Importantly, this strategy can be extended to prepare other 2D hierarchically porous MOF nanosheets by altering metal-oxo clusters and organic ligands. Benefiting from fast mass transfer and highly accessible Lewis acidic sites, the resultant 2D hierarchically porous UiO-66-NH2 nanosheets deliver a fabulous catalytic yield of approximately 96% on the CO2 cycloaddition of glycidyl-2-methylphenyl ether, far exceeding the yield of approximately 29% achieved using conventional UiO-66-NH2 microporous crystals. This "hard" emulsion-induced interface super-assembly strategy paves a new path toward the rational construction of elaborate 2D nanoarchitecture of hierarchical MOFs with tailored physicochemical properties for diverse potential applications.

Nanoscale Metal-Organic Frameworks as a Photoluminescent Platform for Bioimaging and Biosensing Applications

The tracking of nanomedicines in their concentration and location inside living systems has a pivotal effect on the understanding of the biological processes, early-stage diagnosis, and therapeutic monitoring of diseases. Nanoscale metal-organic frameworks (nano MOFs) possess high surface areas, definite structure, regulated optical properties, rich functionalized sites, and good biocompatibility that allow them to excel in a wide range of biomedical applications. Controllable syntheses and functionalization endow nano MOFs with better properties as imaging agents and sensing units for the diagnosis and treatment of diseases. This minireview summarizes the tunable synthesis strategies of nano MOFs with controllable size, shape, and regulated luminescent performance, and pinpoints their recent advanced applications as optical elements in bioimaging and biosensing. The current limitations and future development directions of nano MOF-contained materials in bioimaging and biosensing applications are also discussed, aiming to expand the biological applications of nano MOF-based nanomedicine and facilitate their production or clinical translation.

Recent research progress of selenotungstate-based biomolecular sensing materials

Polyoxometalates (POMs) have drawn significant attention on account of their structural designability, compositional diversity and great potential applications. As an indispensable branch of POMs, selenotungstates (SeTs) have been synthesized extensively. Some SeTs have been applied as sensing materials for detecting biomarkers (e.g., metabolites, hormones, cancer markers). To gain a comprehensive understanding of advancements in SeT-based sensing materials, we present an overview that encapsulates the sensing performances and mechanisms of SeT-based biosensors. SeT-based biosensors are categorized into electrochemical catalytic biosensors, electrochemical affinity biosensors, "turn-off" fluorescence biosensors and "turn-on" fluorescence biosensors. We anticipate the expansive potential of SeT-based biosensors in wearable and implantable sensing technologies, which promises to catalyze significant breakthroughs in SeT-based biosensors.

Sub-Nanometer Mono-Layered Metal-Organic Frameworks Nanosheets for Simulated Flue Gas Photoreduction

The dilemma between the thickness and accessible active site triggers the design of porous crystalline materials with mono-layered structure for advanced photo-catalysis applications. Here, a kind of sub-nanometer mono-layered nanosheets (Co-MOF MNSs) through the exfoliation of specifically designed Co3 cluster-based metal-organic frameworks (MOFs) is reported. The sub-nanometer thickness and inherent light-sensitivity endow Co-MOF MNSs with fully exposed Janus Co3 sites that can selectively photo-reduce CO2 into formic acid under simulated flue gas. Notably, the production efficiency of formic acid by Co-MOF MNSs (0.85 mmol g-1 h-1) is ≈13 times higher than that of the bulk counterpart (0.065 mmol g-1 h-1) under a simulated flue gas atmosphere, which is the highest in reported works up to date. Theoretical calculations prove that the exposed Janus Co3 sites with simultaneously available sites possess higher activity when compared with single Co site, validating the importance of mono-layered nanosheet morphology. These results may facilitate the development of functional nanosheet materials for CO2 photo-reduction in potential flue gas treatment.

Fabrication of a two-dimensional bi-lanthanide metal-organic framework as a ratiometric fluorescent sensor based on energy competition

Bimetallic lanthanide metal-organic frameworks (bi-Ln-MOFs) exhibit great appeal for ratiometric luminescent sensors due to their unique advantages. Specially, the low-lying energy of the empty 4f band of Ce4+ ions benefits Ce-MOFs with robust and broad fluorescent emission. Therefore, constructing ratiometric sensors based on Ce-MOFs is of significance but remains a challenge. Here, a two-dimensional (2D) bi-Ln-MOF is fabricated using Eu3+/Ce4+ and 5-boronoisophthalic acid (5-bop) via a crystal phase transformation strategy to construct a ratiometric luminescent Hg2+ sensor. Due to the lower energy gap of Ce4+ compared to Eu3+ and the corresponding stronger energy-absorption ability, the Ce4+ in bi-Ln-MOF shows a stronger and broader fluorescent emission than that of Eu3+. The substitution of the boric acid group in the bi-Ln-MOF by Hg2+ amplifies the difference between the two lanthanide ions. Therefore, the fluorescence intensity of Ce4+ increases whereas that of Eu3+ decreases accordingly, a behavior distinct from individual Eu-MOF or Ce-MOF performance. This novel bi-Ln-MOF sensor not only achieves a wide linear response range from 0.5 to 120 μM with a low detection limit of 167 nM for Hg2+, but also demonstrates exceptional selectivity and stability. The intriguing sensing mechanism of energy competition and the novel synthesis approach for 2D bi-Ln-MOF are anticipated to broaden the application possibilities of bi-Ln-MOFs for designing ratiometric sensors.

Exploring the CO2 Electrocatalysis Potential of 2D Metal-Organic Transition Metal-Hexahydroxytriquinoline Frameworks: A DFT Investigation

Metal-organic frameworks have demonstrated great capacity in catalytic CO2 reduction due to their versatile pore structures, diverse active sites, and functionalization capabilities. In this study, a novel electrocatalytic framework for CO2 reduction was designed and implemented using 2D coordination network-type transition metal-hexahydroxytricyclic quinazoline (TM-HHTQ) materials. Density functional theory calculations were carried out to examine the binding energies between the HHTQ substrate and 10 single TM atoms, ranging from Sc to Zn, which revealed a stable distribution of metal atoms on the HHTQ substrate. The majority of the catalysts exhibited high selectivity for CO2 reduction, except for the Mn-HHTQ catalysts, which only exhibited selectivity at pH values above 4.183. Specifically, Ti and Cr primarily produced HCOOH, with corresponding 0.606 V and 0.236 V overpotentials. Vanadium produced CH4 as the main product with an overpotential of 0.675 V, while Fe formed HCHO with an overpotential of 0.342 V. Therefore, V, Cr, Fe, and Ti exhibit promising potential as electrocatalysts for carbon dioxide reduction due to their favorable product selectivity and low overpotential. Cu mainly produces CH3OH as the primary product, with an overpotential of 0.96 V. Zn primarily produces CO with a relatively high overpotential of 1.046 V. In contrast, catalysts such as Sc, Mn, Ni, and Co, among others, produce multiple products simultaneously at the same rate-limiting step and potential threshold.

Construction of Two-Dimensional Organometallic Coordination Networks with Both Organic Kagome and Semiregular Metal Lattices on Au(111)

Two-dimensional metal-organic networks (2D MONs) having heterogeneous coordination nodes (HCNs) could exhibit excellent performance in catalysis and optoelectronics because of the unbalanced electron distribution of the coordinating metals. Therefore, the design and construction of 2D MONs with HCNs are highly desirable but remain challenging. Here, we report the construction of 2D organometallic coordination networks with an organic Kagome lattice and a semiregular metal lattice on Au(111) via the in situ formation of HCNs. Using a bifunctional precursor 1,4-dibromo-2,5-diisocyanobenzene, the coordination of isocyano with Au adatom on a room-temperature Au(111) yielded metal-organic coordination chains with isocyano-Au-isocyano nodes. In contrast, on a high-temperature Au(111), a selective debromination/coordination cascade reaction occurred, affording 2D organometallic coordination networks with phenyl-Au-isocyano nodes. By combining scanning tunneling microscopy and density functional theory calculations, we determined the structures of coordination products and the nature of coordination nodes, demonstrating a thermodynamically favorable pathway for forming the phenyl-Au-isocyano nodes.

Strategies for the Preparation of Single-Atom Catalysts Using Low-Dimensional Metal-Organic Frameworks

As single-atom catalysts are important energy materials, their preparation and synthesis methods have become particularly important. The unique structures of low-dimensional metal-organic frameworks and their derivatives provide various strategies for preparing single-atom catalysts. This paper summarizes various strategies for the preparation of single-atom catalysts based on low-dimensional metal-organic frameworks and their derivatives.

Textural Precursor Compositions Harvested for Independent Signal Generators: Scaling Micron-Sized Flower-Like Metal-Organic Frameworks as Amplifying Units for Dual-Mode Glycoprotein Assay

In this work, a micron-sized flower-like metal-organic frameworks (MOFs)-based boronate-affinity sandwich-type immunoassay was fabricated for the dual-mode glycoprotein assay. For proof of concept, the flower-like MOFs were synthesized from transition Cu nodes and tetrakis (4-carboxyphenyl) porphyrin (TCPP) ligands by spontaneous standing assembly. In addition, the specificity toward glycoprotein involved the antigen recognition as well as covalent bonding via the boronate-glycan affinity, and the immediate signal responses were initiated by textural decomposition of the flower-like MOFs. Intriguingly, Cu nodes, of which the valence state is dominant by CuI species, can endow the Fenton-like catalytic reaction of the fluorogenic substrate for generating fluorescence signals. For benefits, TCPP ligands, in which each TCPP molecule has four guest donors, can provide multiple valences for the assembly of cyclodextrin-capped gold nanoparticles via host-guest interaction for colorimetry output. Albeit important, the scaling micrometer patterns for the flower-like MOFs carrying numerous Cu nodes and TCPP ligands can also function as amplifying units, signifying the output signal. The detection limit of the dual-mode glycoprotein assay can reach 10.5 nM for the fluorescence mode and 18.7 nM for the colorimetry mode, respectively. Furthermore, the merits of harvesting different signal generators toward the multimodal readout patterns can allow the mutual verification and make the analytical results more reliable. Collectively, our proposed assay may offer a new idea in combining the inherent textural merits from MOFs for dual signal generators, which can also emphasize accurate detection capability for glycoprotein assay.

When nanozymes meet enzyme: Unlocking the dual-activity potential of integrated biocomposites

Integrating enzymes and nanozymes in various applications is a topic of significant interest. The researchers have explored the encapsulation of enzymes using diverse nanostructures to create nanomaterial-enzyme hybrids. These nanomaterials introduce unique properties that contribute to the additional activity along with the stabilization of enzymes in immobilized form, enabling a cascade of second-order reactions. This review centers on dual-activity nanozymes, providing insights into their applications in biosensors and biocatalysis. These applications leverage the enhanced catalytic activity and stability offered by dual-activity nanozymes. These nanozymes find promising applications in fields like bioremediation, offering eco-friendly solutions for mitigating environmental pollution while showing potential in medical diagnostics. The review delves into various techniques for creating enzyme-nanozyme hybrid catalysts, including adsorption, encapsulation, and incorporation methods. The review also addresses the challenges that must be overcome, such as overlapping catalytic surfaces and disparities in reaction rates in multi-enzyme cascade reactions. It concludes by presenting strategies to tackle these issues and offers insights into the field's promising future, suggesting that machine learning may drive further advancements in enzyme-nanozyme integration. This comprehensive exploration illuminates the present and charts a promising course for future innovations in the seamless integration of enzymes and nanozymes, heralding a new era of catalytic possibilities.

Metal-organic frameworks as candidates for tumor sonodynamic therapy: Designable structures for targeted multifunctional transformation

Sonodynamic therapy (SDT), utilizing ultrasound (US) as the trigger, has gained popularity recently as a therapeutic approach with significant potential for treating various diseases. Metal-organic frameworks (MOFs), characterized by structural flexibility, are prominently emerging in the SDT realm as an innovative type of sonosensitizer, offering functional tunability and biocompatibility. However, due to the inherent limitations of MOFs, such as low reactivity to reactive oxygen species and challenges posed by the complex tumor microenvironment, MOF-based sonosensitizers with singular functions are unable to demonstrate the desired therapeutic efficacy and may pose risks of toxicity, limiting their biological applications to superficial tissues. MOFs generally possess distinctive crystalline structures and properties, and their controlled coordination environments provide a flexible platform for exploring structure-effect relationships and guiding the design and development of MOF-based nanomaterials to unlock their broader potential in biological fields. The primary focus of this paper is to summarize cases involving the modification of different MOF materials and the innovative strategies developed for various complex conditions. The paper outlines the diverse application areas of functionalized MOF-based sonosensitizers in tumor synergistic therapies, highlighting the extensive prospects of SDT. Additionally, challenges confronting SDT are briefly summarized to stimulate increased scientific interest in the practical application of MOFs and the successful clinical translation of SDT. Through these discussions, we strive to foster advancements that lead to early-stage clinical benefits for patients. STATEMENT OF SIGNIFICANCE: 1. An overview for the progresses in SDT explored from a novel and fundamental perspective. 2. Different modification strategies to improve the MOFs-mediated SDT efficacy are provided. 3. Guidelines for the design of multifunctional MOFs-based sonosensitizers are offered. 4. Powerful tumor ablation potential is reflected in SDT-led synergistic therapies. 5. Future challenges in the field of MOFs-based SDT in clinical translation are suggested.

Fabrication of Carboxylate-Functionalized 2D MOF Nanosheet with Caged Cavity for Efficient and Selective Extraction of Uranium from Aqueous Solution

The efficient removal of radioactive uranium from aqueous solution is of great significance for the safe and sustainable development of nuclear power. An ultrathin 2D metal-organic framework (MOF) nanosheet with cavity structures was elaborately fabricated based on a calix[4]arene ligand. Incorporating the permanent cavity structures on MOF nanosheet can fully utilize its structural characteristics of largely exposed surface area and accessible adsorption sites in pollutant removal, achieving ultrafast adsorption kinetics, and the functionalized cavity structure would endow the MOF nanosheets with the ability to achieve preconcentration and extraction of uranium from aqueous solution, affording ultrahigh removal efficiency even in ultra-low concentrations. Thus, more than 97% uranium can be removed from the concentration range of 50-500 µg L-1 within 5 min. Moreover, the 2D nano-material exhibits ultra-high anti-interference ability, which can efficiently remove uranium from groundwater and seawater. The adsorption mechanism was investigated by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) analysis, and density functional theory (DFT) calculations, which revealed that the cavity structure plays an important role in uranium capture. This study not only realizes highly efficient uranium removal from aqueous solution but also opens the door to achieving ultrathin MOF nanosheets with cavity structures, which will greatly expand the applications of MOF nanosheets.

Dimensional Reduction of Metal-Organic Frameworks for Photocatalytic Synthesis of Fused Tetracyclic Heterocycles

Heterogeneous palladium catalysts with high efficiency, high Pd atom utilization, simplified separation, and recycle have attracted considerable attention in the field of synthetic chemistry. Herein, we reported a zirconium-based two-dimensional metal-organic framework (2D-MOF)-based Pd(II) photocatalyst (Zr-Ir-Pd) by merging the Ir photosensitizers and Pd(II) species into the skeletons of the 2D-MOF for the Pd(II)-catalyzed oxidation reaction. Morphological and structural characterization identified that Zr-Ir-Pd with a specific nanoflower-like structure consists of ultrathin 2D-MOF nanosheets (3.85 nm). Due to its excellent visible-light response and absorption capability, faster transfer and separation of photogenerated carriers, more accessible Pd active sites, and low mass transfer resistance, Zr-Ir-Pd exhibited boosted photocatalytic activity in catalyzing sterically hindered isocyanide insertion of diarylalkynes for the construction of fused tetracyclic heterocycles, with up to 12 times the Pd catalyst turnover number than the existing catalytic systems. In addition, Zr-Ir-Pd inhibited the competitive agglomeration of Pd(0) species and could be reused at least five times, owing to the stabilization of 2D-MOF on the single-site Pd and Ir sites. Finally, a possible mechanism of the photocatalytic synthesis of fused tetracyclic heterocycles catalyzed by Zr-Ir-Pd was proposed.

Exfoliatable Layered 2D Honeycomb Crystals of Host-guest Complexes Networked by CH-π Hydrogen Bonds

Studies of graphene show that robust chemical bonds such as covalent bonds with trigonal-planar atoms afford layered atomic 2D crystals possessing unique properties. Although layered molecular crystals are of interest to diversify elements and structures of 2D materials, the structural diversity of molecules as well as weak intermolecular interactions inevitably makes the design to be one-off and individual. We herein report a versatile method to assemble layered molecular crystals. By developing a D3-symmetry host at vertices to form a honeycomb layer, a diverse range of layered 2D host-guest crystals were obtained. Substituents on the host, elements/structures of the guest, the stereochemistry of the host and types of intercalants were diversified, which should allow for 6×32×3×2 combinations for structural diversification.

Two-dimensional metal organic frameworks in cancer treatment

With large specific surface area, controllable pore size, increased active sites, and structural stability, two-dimensional metal organic frameworks (2D MOFs) have emerged as promising nanomedicines in cancer therapy. These distinctive features make 2D MOFs particularly advantageous in cancer treatment and the corresponding application has gained considerable popularity, signifying significant application potential. Herein, recent advances in various applications including drug delivery and chemotherapy, photodynamic therapy, sonodynamic therapy, chemodynamic therapy, catalytic therapy, and combined therapy were summarized, with emphasis on the latest progress of new materials and mechanisms for these processes. Moreover, the current challenges, potential solutions, and possible future directions are discussed as well.

Crystalline nanosheets of three-dimensional supramolecular frameworks with uniform thickness and high stability

Fabricating three dimensional (3D) supramolecular frameworks (SMFs) into stable crystalline nanosheets remains a great challenge due to the homogeneous and weak inter-building block interactions along 3D directions. Herein, crystalline nanosheets of a 3D SMF with a uniform thickness of 4.8 ± 0.1 nm immobilized with Pt nanocrystals on the surface (Q[8]/Pt NSs) were fabricated via the solid-liquid reaction between cucurbit[8]uril/H2PtCl6 single crystals and hydrazine hydrate with the help of gas and heat yielded during the reaction process. A series of experiments and theoretical calculations reveal the ultrahigh stability of Q[8]/Pt NSs due to the high density hydrogen bonding interaction among neighboring Q[8] molecules. This in turn endows Q[8]/Pt NSs with excellent photocatalytic and continuous thermocatalytic CO oxidation performance, representing the thus-far reported best Pt nano-material-based catalysts.

Density Functional Study of Electrocatalytic Carbon Dioxide Reduction in Fourth-Period Transition Metal-Tetrahydroxyquinone Organic Framework

This study investigates the utilisation of organometallic network frameworks composed of fourth-period transition metals and tetrahydroxyquinone (THQ) in electrocatalytic CO2 reduction. Density functional theory (DFT) calculations were employed in analysing binding energies, as well as the stabilities of metal atoms within the THQ frameworks, for transition metal TM-THQs ranging from Y to Cd. The findings demonstrate how metal atoms could be effectively dispersed and held within the THQ frameworks due to sufficiently high binding energies. Most TM-THQ frameworks exhibited favourable selectivity towards CO2 reduction, except for Tc and Ru, which experienced competition from hydrogen evolution reaction (HER) and required solution environments with pH values greater than 5.716 and 8.819, respectively, to exhibit CO2RR selectivity. Notably, the primary product of Y, Ag, and Cd was HCOOH; Mo produced HCHO; Pd yielded CO; and Zr, Nb, Tc, Ru, and Rh predominantly generated CH4. Among the studied frameworks, Zr-THQ displayed values of 1.212 V and 1.043 V, corresponding to the highest limiting potential and overpotential, respectively, while other metal-organic frameworks displayed relatively low ranges of overpotentials from 0.179 V to 0.949 V. Consequently, it is predicted that the TM-THQ framework constructed using a fourth-period transition metal and tetrahydroxyquinone exhibits robust electrocatalytic reduction of CO2 catalytic activity.

Powders to Thin Films: Advances in Conjugated Microporous Polymer Chemical Sensors

Chemical sensing of harmful species released either from natural or anthropogenic activities is critical to ensuring human safety and health. Over the last decade, conjugated microporous polymers (CMPs) have been proven to be potential sensor materials with the possibility of realizing sensing devices for practical applications. CMPs found to be unique among other porous materials such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) due to their high chemical/thermal stability, high surface area, microporosity, efficient host-guest interactions with the analyte, efficient exciton migration along the π-conjugated chains, and tailorable structure to target specific analytes. Several CMP-based optical, electrochemical, colorimetric, and ratiometric sensors with excellent selectivity and sensing performance were reported. This review comprehensively discusses the advances in CMP chemical sensors (powders and thin films) in the detection of nitroaromatic explosives, chemical warfare agents, anions, metal ions, biomolecules, iodine, and volatile organic compounds (VOCs), with simultaneous delineation of design strategy principles guiding the selectivity and sensitivity of CMP. Preceding this, various photophysical mechanisms responsible for chemical sensing are discussed in detail for convenience. Finally, future challenges to be addressed in the field of CMP chemical sensors are discussed.

Electrochemical Synthesis and Electrocatalytic Oxygen-Evolution Performance of Two-Dimensional NiCo-BPDC Materials

Metal-organic frameworks (MOFs) have been widely studied as electrocatalysts, and the research strategy to improve their electrocatalytic oxygen evolution reaction (OER) performance is to modify their structure. In this paper, two-dimensional bimetallic MOFs were constructed to improve electrocatalytic OER performance. Using a mild electrochemical method with Ni and Co as metal sources and 4, 4 '-biphenyl dicarboxylic acid (H2BPDC) as ligand, two-dimensional NiCo-BPDC was synthesized and then deposited on a carbon cloth electrode. The results show that NiCo-BPDC/CC possessed a low overpotential of 356 mV at a current density of 20 mA cm-2 with a small Tafel slope of 86 mV dec-1 in 1.0 M KOH solution. The two-dimensional NiCo-BPDC exhibits excellent electrocatalytic OER performance because the coordination of Ni and Co in the material and the interaction of the two-dimensional materials provide a large electrochemically active surface area and expose more metal active sites for OER, thus improving the reaction efficiency and indicating NiCo-BPDC as potential OER electrocatalyst.

Bottom-Up Construction of Rhombic Lamellar CoNi-MOFs for the Electrochemical Sensing of H2S

Lamellar metal-organic frameworks (MOFs) have attracted significant attention in the field of electrochemical sensing due to their abundant open active sites and specific electron conductivity. Herein, by employing a bottom-up synthesis strategy, rhombic lamellar heterometallic CoNi-MOFs with varying thicknesses are constructed. This is achieved by using 4-methylpyridine as a capping agent based on the (4,6)-linked Co2(azpy)2(bptc) (azpy = 4,4'-azopyridine, bptc = 3,3',5,5'-biphenyltetracarboxylic acid) structure with a fsc topology and by introducing Ni species simultaneously. To mitigate sulfur deposition on electrodes, the triple pulse amperometry (TPA) method is employed. Among the synthesized lamellar CoNi-MOFs, lamellar CoNi-MOF-3 with the minimum thickness exhibits an optimal electrochemical sensing performance toward hydrogen sulfide, with a sensitivity of 119.3 μA·mM-1·cm-2 in the linear range of 2-2000 μM. This study pioneers a new approach to the controlled construction and electrochemical activity modification of lamellar MOF materials.

Electron Storage in Monolayer Tungstate Nanosheets Produced via a Scalable Exfoliation Method

Inorganic nanosheet materials with atomic thinness have been widely studied as (photo)catalytic materials due to their unique electronic states and surface structures. One scalable and reproducible method of producing monolayer nanosheets is a top-down approach based on the exfoliation of layered parent compounds using an alkylammonium solution as a surfactant. However, H2W2O7 layered tungstates dissolve in basic aqueous solutions, making them unsuitable for the exfoliation process. This work proposes a scalable method to obtain monolayer WO3 nanosheets with a very high external field responsiveness. This work shows that H2W2O7 topochemically swells in a concentrated octylamine (C8N17NH2) aqueous solution with a concentration above the solubility of octylamine in water. Water was added for exfoliation of the liquid crystalline phase into isolated W2O72- nanosheets with octylammonium (C8N17NH3+) protection. Crystalline WO3 nanosheets on the n-Si substrate obtained with calcination exhibited electron richness in the conduction band due to static electron transfer at the interface.

Porphyrin-Thiophene Based Conjugated Polymer Cathode with High Capacity for Lithium-Organic Batteries

Organic electrode materials are promising for next-generation energy storage materials due to their environmental friendliness and sustainable renewability. However, problems such as their high solubility in electrolytes and low intrinsic conductivity have always plagued their further application. Polymerization to form conjugated organic polymers can not only inhibit the dissolution of organic electrodes in the electrolyte, but also enhance the intrinsic conductivity of organic molecules. Herein, we synthesized a new conjugated organic polymer (COPs) COP500-CuT2TP (poly [5,10,15,20-tetra(2,2'-bithiophen-5-yl) porphyrinato] copper (II)) by electrochemical polymerization method. Due to the self-exfoliation behavior, the porphyrin cathode exhibited a reversible discharge capacity of 420 mAh g-1, and a high specific energy of 900 Wh Kg-1 with a first coulombic efficiency of 96 % at 100 mA g-1. Excellent cycling stability up to 8000 cycles without capacity loss was achieved even at a high current density of 5 A g-1. This highly conjugated structure promotes COP500-CuT2TP combined high energy density, high power density, and good cycling stability, which would open new opportunity for the designable and versatile organic electrodes for electrochemical energy storage.

A Three-Dimensionally Extended Metal-Organic Ladder Compound Exhibiting Proton Conduction

Ladder systems situated in the dimensional crossover region have attracted much attention because their electronic states and physical properties depend strongly on the electronic correlations among the constituent legs. Generally, two-/three-legged transition metal-oxide ladder compounds are studied as representative ladder systems, but two-/three-dimensional (2D/3D) extensions based on such ladder systems with a few numbers of legs are difficult because of the extreme synthesis conditions. Here, for the first time, we report the successful creation of a 3D extended two-legged ladder compound, [Pt(en)(dpye)I]2(NO3)4 ⋅ 2H2O (en=ethylenediamine; dpye=1,2-Di(4-pyridyl)ethane), which is obtained by simple oxidative polymerization of a small Pt macrocyclic complex using elemental I2. The unique 3D extended lattice consists of 1D mixed-valence halogen-bridged metal chains (⋅⋅⋅Pt-I-Pt-I⋅⋅⋅) and helically arranged macrocyclic units as the constituent legs and rungs, as confirmed by single-crystal X-ray diffraction. Diffuse X-ray scattering analyses and optical measurements revealed that the out-of-phase mixed-valence Pt2+/Pt4+ arrangement arises from the weak interchain correlation among adjacent legs. In addition, this compound shows an increase in proton conductivity by a factor of up to 1000, depending on humidity.

The luminescent principle and sensing mechanism of metal-organic framework for bioanalysis and bioimaging

Metal-organic frameworks (MOFs) porous material have obtained more and more attention during the past decade. Among various MOFs materials, luminescent MOFs with specific chemical characteristics and excellent optical properties have been regarded as promising candidates in the research of cancer biomarkers detection and bioimaging. Therefore, the latest advances and the principal biosensing and imaging strategies based on the luminescent MOFs were discussed in this review. The effective synthesis methods of luminescent MOFs were emphasized firstly. Subsequently, the luminescent principle of MOFs has been summarized. Furthermore, the luminescent MOF-based sensing mechanisms have been highlighted to provide insights into the design of biosensors. The designability of LMOFs was suitable for different needs of biorecognition, detection, and imaging. Typical examples of luminescent MOF in the various cancer biomarkers detection and bioimaging were emphatically introduced. Finally, the future outlooks and challenges of luminescent MOF-based biosensing systems were proposed for clinical cancer diagnosis.

CO2-Philic Nanocomposite Polymer Matrix Incorporated with MXene Nanosheets for Ultraefficient CO2 Capture

The incorporation of two-dimensional (2D) functional nanosheets in polymeric membranes is a promising material strategy to overcome their inherent performance trade-off behavior. Herein, we report a novel nanocomposite membrane design by incorporating MXene, a 2D sheet-like nanoarchitecture known for its advantageous lamellar morphology and surface functionalities, into a cross-linked polyether block amide (Pebax)/poly(ethylene glycol) methyl ether acrylate (PEGMEA) blend matrix, which delivered exceptional CO2/N2 and CO2/H2 separation performances that are critical to industrial CO2 capture applications. The finely dispersed Ti3C2Tx nanosheets in the blend polymer matrix led to an expansion of the free volume within the resultant mixed matrix membrane (MMM), giving rise to a substantially enhanced CO2 permeability of up to 1264.6 barrer, which is 102% higher than that of the pristine polymer. Moreover, these MXene-incorporated MMMs exhibited preferential sorption for CO2 over light gases, which contributed to an exceptional CO2/N2 and CO2/H2 selectivity (64.3 and 19.2, respectively) even at a small loading of only 1 wt %, allowing the overall performance to not only surpass the latest upper bounds but also exceed many previously reported high-performance nanosheet-based nanocomposite membranes. Long-term performance tests have also demonstrated the good stability of these membranes. This composite membrane design strategy reveals the remarkable potential of combining a blend copolymer matrix with ultrathin MXene nanosheets to achieve superior gas separation performance for environmentally important gas separations.

In Situ Exfoliation Growth Strategy Realizing Controlled Synthesis of 3D to 2D MOF Materials as High-Performance Electrochemical Biosensors

Two-dimensional (2D) metal-organic framework (MOF) nanosheets with large surface area, ultrathin thickness, and highly accessible active sites have attracted great research attention. Developing efficient approaches to realize the controllable synthesis of well-defined 2D MOFs with a specific composition and morphology is critical. However, it is still a significant challenge to construct thin and uniform 2D MOF nanosheets and resolve the reagglomeration as well as poor stability of target 2D MOF products. Here, an "in situ exfoliation growth" strategy is proposed, where a one-step synthetic process can realize the successful fabrication of PBA/MIL-53(NiFe)/NF nanosheets on the surface of nickel foam (NF) via in situ conversion and exfoliation growth strategies. The PBA/MIL-53(NiFe)/NF nanosheets combine the individual advantages of MOFs, Prussian blue analogues (PBAs), and 2D materials. As expected, the resulting PBA/MIL-53(NiFe)/NF as a glucose electrode exhibits an extremely high sensitivity of 25.74 mA mM-1 cm-2 in a very wide concentration range of 180 nM to 4.8 μM. The present exciting work provides a simple and effective strategy for the construction of high-performance nonenzymatic glucose electrochemical biosensors.

Unleashing the Power of PET-RAFT Polymerization: Journey from Porphyrin-Based Photocatalysts to Combinatorial Technologies and Advanced Bioapplications

The emergence of photoinduced energy/electron transfer-reversible addition-fragmentation chain transfer polymerization (PET-RAFT) not only revolutionized the field of photopolymerization but also accelerated the development of porphyrin-based photocatalysts and their analogues. The continual expansion of the monomer family compatible with PET-RAFT polymerization enhances the range of light radiation that can be harnessed, providing increased flexibility in polymerization processes. Furthermore, the versatility of PET-RAFT polymerization extends beyond its inherent capabilities, enabling its integration with various technologies in diverse fields. This integration holds considerable promise for the advancement of biomaterials with satisfactory bioapplications. As researchers delve deeper into the possibilities afforded by PET-RAFT polymerization, the collaborative efforts of individuals from diverse disciplines will prove invaluable in unleashing its full potential. This Review presents a concise introduction to the fundamental principles of PET-RAFT, outlines the progress in photocatalyst development, highlights its primary applications, and offers insights for future advancements in this technique, paving the way for exciting innovations and applications.

Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

Size-matching compositing nanoprobe of AIE-type gold nanocluster supramolecular nanogels wrapped by hypergravity-tailored MnO2 nanosheets for cellular glutathione detection

Compositing has been the main approach for material creation via wisely combining material components with different properties. MnO2 nanosheets (MNSs) with thin 2 D morphology are usually applied to composite molecules or nanomaterials for biosensing and bioimaging applications. However, such composition is actually structurally unmatched, albeit performance matching. Here, a series of benefits merely on the basis of structural match have been unearthed via tailoring MNSs with four sizes by synthesis under controllable hypergravity field. The classical fluorophore-quencher couple was utilized as the subject model, where the soft supramolecular nanogels based on aggregation-induced emission (AIE)-active gold nanoclusters were wrapped by MNSs of strong absorption. By comparative study of one-on-one wrapping and one-to-many encapsulation with geometrical selection of different MNSs, we found that the one-on-one wrapping model protected weakly-bonded nanogels from combination-induced distortion and strengthened nanogel networks via endowing exoskeleton. Besides, wrapping pattern and size-match significantly enhanced the quenching efficiency of MNSs towards the emissive nanogels. More importantly, the well-wrapped nanocomposites had considerable enhanced biological compatibility with much lower cytotoxicity and higher transfection capacity than the untailored MNSs composite and could serve as cellular glutathione detection.

Novel Ag-modified vanadate nanosheets for determination of small organic molecules with laser desorption ionization mass spectrometry

Laser desorption ionization mass spectrometry (LDI-MS) aroused intensive concerns for the merits of label-free and high-throughput analysis. Here, we designed a silver nanoparticles (AgNP)-modified indium vanadate nanosheets with doping samarium (AgNP@InVO4:Sm) nanosheets. The developed AgNP@InVO4:Sm nanosheets (AIVON) were synthesized based on the microemulsion-mediated solvothermal method and ultraviolet-assisted in situ formation of AgNP, then for the first time applied as a matrix in LDI-MS analysis. With the advantages including enhanced MS signal, little matrix-related background, high reproducibility, and good salt tolerance, AIVON exhibited much better prospect than non-modified indium vanadate nanosheets with doping samarium (IVON) and traditional organic matrix, thus allowing sensitive MS detection for a wide range of low-molecular-weight (LMW) molecules. Moreover, by coupling with headspace sampling thin-film microextraction (TFME), a kind of representative pollutant chlorophenols were identified and quantified via AIVON-assisted LDI-MS in environmental and biological samples. Volatile LMW pollutants could be preconcentrated after TFME, hence a sensitive and rapid assay with negligible sample matrix effect was realized by using AIVON-assisted LDI-MS. It is anticipated that this novel nano-matrix AIVON and the proposed TFME coupling detection strategy were of competitive merits for LDI-MS analysis in the fields of environment, biomedicine, and agriculture.

A zero-valent palladium cluster-organic framework

Acquiring spatial control of nanoscopic metal clusters is central to their function as efficient multi-electron catalysts. However, dispersing metal clusters on surfaces or in porous hosts is accompanied by an intrinsic heterogeneity that hampers detailed understanding of the chemical structure and its relation to reactivities. Tethering pre-assembled molecular metal clusters into polymeric, crystalline 2D or 3D networks constitutes an unproven approach to realizing ordered arrays of chemically well-defined metal clusters. Herein, we report the facile synthesis of a {Pd3} cluster-based organometallic framework from a molecular triangulo-Pd3(CNXyl)6 (Xyl = xylyl; Pd3) cluster under chemically mild conditions. The formally zero-valent Pd3 cluster readily engages in a complete ligand exchange when exposed to a similar, ditopic isocyanide ligand, resulting in polymerization into a 2D coordination network (Pd3-MOF). The structure of Pd3-MOF could be unambiguously determined by continuous rotation 3D electron diffraction (3D-ED) experiments to a resolution of ~1.0 Å (>99% completeness), showcasing the applicability of 3D-ED to nanocrystalline, organometallic polymers. Pd3-MOF displays Pd03 cluster nodes, which possess significant thermal and aerobic stability, and activity towards hydrogenation catalysis. Importantly, the realization of Pd3-MOF paves the way for the exploitation of metal clusters as building blocks for rigidly interlocked metal nanoparticles at the molecular limit.

Template-controllable rolling circle amplification for dual protein sensitive analysis

Conjoint analysis of multiple protein biomarkers can improve the accuracy of disease analysis. Rolling circle amplification (RCA) generates different products by designing circular templates, which can subsequently bind with specific probes to generate various fluorescence signals; thus, it has potential for application in the analysis of various protein biomarkers. Current RCA approaches to detect proteins commonly follow an indirect primer-controlled RCA mode. And the molecular beacon probe combines with RCA products through free collision to generate signals, resulting in lower reaction efficiency. Herein, we propose a direct template-controlled RCA mode using nanosheets as carriers and quenchers for fluorescent probes to simultaneously detect two protein biomarkers. A dual functional magnetic bead was first designed to recognize and capture two proteins while releasing two templates for subsequent RCA. RCA products compete with probes loaded on two-dimensional metal-organic framework nanosheets for hybridization, completing the transition from single-stranded to double-stranded DNA. Double-stranded DNA is far from the nanosheets, and the recovered fluorescence signal can be used to evaluate the concentration of target proteins. This method exhibits excellent analytical performance and can successfully achieve the analysis of Tau and AβO in Alzheimer's disease clinical cerebrospinal fluid samples.

Two-Dimensional Nickel Porphyrinic Metal-Organic Framework-Modified Electrode for Electrochemical Sensing

Due to their highly exposed active sites and high aspect ratio caused by their substantial lateral dimension and thin thickness, two-dimensional (2D) metal-organic framework (MOF) nanosheets are currently considered a potential hybrid material for electrochemical sensing. Herein, we present a nickel-based porphyrinic MOF nanosheet as a versatile and robust platform with an enhanced electrochemical detection performance. It is important to note that the nickel porphyrin ligand reacted with Cu(NO3)2·3H2O in a solvothermal process, with polyvinylpyrrolidone (PVP) acting as the surfactant to control the anisotropic development of creating a 2D Cu-TCPP(Ni) MOF nanosheet structure. To realize the exceptional selectivity, sensitivity, and stability of the synthesized 2D Cu-TCPP(Ni) MOF nanosheet, a laser-induced graphene electrode was modified with the MOF nanosheet and employed as a sensor for the detection of p-nitrophenol (p-NP). With a detection range of 0.5-200 μM for differential pulse voltammetry (DPV) and 0.9-300 μM for cyclic voltammetry (CV), the proposed sensor demonstrated enhanced electrochemical performance, with the limit of detection (LOD) for DPV and CV as 0.1 and 0.3 μM, respectively. The outstanding outcome of the sensor is attributed to the 2D Cu-TCPP(Ni) MOF nanosheet's substantial active surface area, innate catalytic activity, and superior adsorption capacity. Furthermore, it is anticipated that the proposed electrode sensor will make it possible to create high-performance electrochemical sensors for environmental point-of-care testing since it successfully detected p-NP in real sample analysis.

In situ selective selenization of ZIF-derived CoSe2 nanoparticles on NiMn-layered double hydroxide@CuBr2 heterostructures for high performance supercapacitors

As an emerging energy storage device, the practical application of supercapacitors (SCs) is currently constrained by their low energy density. Enhancing the capacitance of supercapacitors by leveraging the synergistic effect of multiple components in composite electrodes with well-designed structures can effectively increase their energy density. Here, a wire-sheet-particle hierarchical heterostructured CoSe2@NiMn-layered double hydroxide (NiMn-LDH) @Cu1.8Se/Copper foam (CF) electrode is synthesized via phase pseudomorphic transformation process achieved by selective selenization for Cu and Co elements. Benefiting from the stable support structure of CuBr2, the large specific surface area of NiMn-LDH, and the excellent conductivity of CoSe2, the prepared binder-free electrode shows excellent electrochemical properties. The CoSe2@NiMn-LDH@Cu1.8Se hybrid electrode exhibits a superior specific areal capacitance of 7064 mF cm-2 at 2 mA cm-2 and a stable cyclic performance with 80.11 % capacitance retention after 10,000 cycles. Furthermore, the assembled CoSe2@NiMn-LDH@Cu1.8Se/CF//AC (activated carbon) asymmetric supercapacitor (ASC) achieves an energy density of 36.6 Wh kg-1 when the power density is 760.6 W Kg-1 and retains 87.35 % of the initial capacitance after 5000 cycles. Overall, this pioneering research provided new insight for preparing supercapacitor electrode materials by selective selenization and ration design of the structures.

Gas-responsive two-dimensional metal-organic framework composites for trace visualization of volatile organic compounds

Highly sensitive and specific identification of complex volatile organic compound mixtures has always been a huge challenge in the field of gas detection. To address this issue, the gas-responsive two-dimensional metal-organic framework (MOF) composites have been designed for fabricating a colorimetric sensor arrays for extremely sensitive detection of volatile organic compounds (VOCs). The physically exfoliated MOF nanosheets Zn2(bim)4 with large surface area and abundant unsaturated active sites were used for loading various dyes to form dye/Zn2(bim)4 composites. Due to the protective effect on dye activity and preconcentration for VOCs, the dye/Zn2(bim)4 composites-based colorimetric sensor arrays showed significantly enhanced sensitivity compared with the corresponding dyes for the detection of various VOCs. The mechanical flexibility of the dye/MOF nanosheets endowed the excellent film-forming properties on various substrates for fabricating the colorimetric sensor arrays. Besides owing to the hydrophobic property and the protection of the Zn2(bim)4 nanosheets, the dye/Zn2(bim)4 sensor arrays exhibited excellent anti-interference including humidity and temperature influence. On the basis of the fantastic properties of dye/Zn2(bim)4 composites for VOCs detection, the dye/Zn2(bim)4 sensor arrays were applied for the early perception of the plant disease late blight via ultra-sensitive and highly specific sensing the VOCs released from the infected plants.

Size Effect for Inhibiting Polysulfides Shuttle in Lithium-Sulfur Batteries

It is undeniable that the dissolution of polysulfides is beneficial in speeding up the conversion rate of sulfur in electrochemical reactions. But it also brings the bothersome "shuttle effect". Therefore, if polysulfides can be retained on the cathode side, the efficient utilization of the polysulfides can be guaranteed to achieve the excellent performance of lithium-sulfur batteries. Based on this idea, considerable methods have been developed to inhibit the shuttling of polysulfides. It is necessary to emphasize that no matter which method is used, the solvation mechanism, and existence forms of polysulfides are essential to analyze. Especially, it is important to clarify the sizes of different forms of polysulfides when using the size effect to inhibit the shuttling of polysulfides. In this review, a comprehensive summary and in-depth discussion of the solvation mechanism, the existing forms of polysulfides, and the influencing factors affecting polysulfides species are presented. Meanwhile, the size of diverse polysulfide species is sorted out for the first time. Depending on the size of polysulfides, tactics of using size effect in cathode, separator, and interlayer parts are elaborated. Finally, a design idea of materials pore size is proposed to satisfy the use of size effect to inhibit polysulfides shuttle.

Perspective into ion storage of pristine metal-organic frameworks in capacitive deionization

Metal-organic frameworks (MOFs), featuring tunable conductivity, tailored pore/structure and high surface area, have emerged as promising electrode nanomaterials for ion storage in capacitive deionization (CDI) and garnered tremendous attention in recent years. Despite the many advantages, the perspective from which MOFs should be designed and prepared for use as CDI electrode materials still faces various challenges that hinder their practical application. This summary proposes design principles for the pore size, pore environment, structure and dimensions of MOFs to precisely tailor the surface area, selectivity, conductivity, and Faradaic activity of electrode materials based on the ion storage mechanism in the CDI process. The account provides a new perspective to deepen the understanding of the fundamental issues of MOFs electrode materials to further meet the practical applications of CDI.

Ultrafine Iridium Nanoparticles Anchored on Co-Based Metal-Organic Framework Nanosheets for Robust Hydrogen Evolution in Alkaline Media

A highly promising electrocatalyst has been designed and prepared for the hydrogen evolution reaction (HER). This involves incorporating well-dispersed Ir nanoparticles into a cobalt-based metal-organic framework known as Co-BPDC [Co(bpdc)(H2O)2, BPDC: 4,4'-biphenyldicarboxylic acid]. Ir@Co-BPDC demonstrates exceptional HER activity in alkaline media, surpassing both commercial Pt/C and recent noble-metal catalysts. Theoretical results indicate that electron redistribution, induced by interfacial bonds, optimizes the adsorption energy of water and hydrogen, thereby enhancing our understanding of the superior properties of Ir@Co-BPDC for HER.

Highly efficient electrochemical detection of H2O2 utilizing an innovative copper porphyrinic nanosheet decorated bismuth metal-organic framework modified electrode

The ability to detect hydrogen peroxide is important due to the presence in biological systems. Researchers are highly interested in developing efficient electrochemical hydrogen peroxide sensors. Metal-organic frameworks (MOFs) with their composites, an emerging class of porous materials, are ideal candidates for heterogeneous catalysts because of their versatile functionalities. Using a facile solvothermal reaction, we fabricated a 2D Cu-TCPP nanosheet uniformly grown on a 3D Bi-MOF. The process takes advantage of the large surface area and pore volume of the Bi-MOF while maintaining the crystallinity of Bi-BTC when Cu-TCPP is added to the surface. The sensor was fabricated by depositing the Bi-BTC-Cu-TCPP nanocomposites on a glassy carbon electrode to conduct electrochemical measurements such as cyclic voltammetry and electrochemical impedance spectroscopy. Finally, differential pulse voltammetry was utilized to investigate the effect of hydrogen peroxide on the electrochemical activity of Bi-BTC-Cu-TCPP deposited on a glassy carbon electrode. This electrode showed high electrochemical performance activity for the reduction of hydrogen peroxide. The sensor showed a linear response to H2O2 in the 10-120 μM concentration range, with a detection limit of 0.20 μM. The sensor was also stable and selective for H2O2 in the presence of other interfering species. This work demonstrates the potential of nanocomposite-based electrochemical sensors for sensitive and selective detection of H2O2. Besides, the modified electrode has many advantages, including remarkable catalytic activity, long-term stability, good reproducibility, and a good signal response during H2O2 reduction.

Lewis Acidic Metal-Organic Framework Assisted Ambient Liquid Extraction Mass Spectrometry Imaging for Enhancing the Coverage of Poorly Ionizable Lipids in Brain Tissue

The spatial distribution of lipidomes in tissues is of great importance in studies of living processes, diseases, and therapies. Mass spectrometry imaging (MSI) has become a critical technique for spatial lipidomics. However, MSI of low-abundance or poorly ionizable lipids is still challenging because of the ion suppression from high-abundance lipids. Here, a metal-organic framework (MOF) Zr6O4(OH)4(1,3,5-Tris(4-carboxyphenyl) benzene)2(triflate)6(Zr6OTf-BTB) was prepared and used for selective on-tissue adsorption of phospholipids to reduce ion suppression from them to poorly ionizable lipids. The results show that Zr6OTf-BTB with strong Lewis acidic sites and a large specific surface area (647.9 m2·g-1) could selectively adsorb phospholipids under 1% FA-MeOH. Adsorption efficiencies of phospholipids are 88.4-144.9 times higher than those of other neutral lipids. Moreover, the adsorption capacity and the adsorption kinetic rate constant of the new material to phospholipids are higher than those of Zr6-BTB (242.72 vs 73.96 mg·g-1, 0.0442 vs 0.0220 g·mg-1·min-1). A Zr6OTf-BTB sheet was prepared by a lamination technique for on-tissue phospholipid adsorption from brain tissue. Then, the tissue section on the Zr6OTf-BTB sheet was directly imaged via ambient liquid extraction-MSI with 1% FA-MeOH as the sampling solvent. The results showed that phospholipids could be 100% removed directly on tissue, and the detection coverage of the Zr6OTf-BTB-enhanced MSI method to ceramides (Cers) and hexosylceramides (HexCers) was increased by 5-26 times compared with direct tissue MSI (26 vs 1 and 17 vs 3). The new method provides an efficient and convenient way to eliminate the ion suppression from phospholipids in MSI, largely improving the detection coverage of low-abundance and poorly ionizable lipids.

A Cu2(C6O6) metal-organic framework monolayer assembled on silicon carbide grown graphene exhibiting a metallic band structure

We report the self-assembly of a monolayer metal-organic framework of Cu-benzenehexol (BHO) on a graphene/SiC substrate assisted by in situ Cu-catalyzed deprotonation reactions. The density functional theory calculations reveal that the free-standing framework is a semiconductor with a band gap of 0.485 eV. Interestingly, upon adsorption on the substrate, the Fermi level is up-shifted to the conduction band of the free-standing framework due to the n-doped graphene on SiC, while the other band structure features are largely preserved. The metallic nature corroborates the scanning tunneling microscopy images acquired near the Fermi level. This work demonstrates that the graphene substrate, which interacts weakly with the framework, can be used to tune the Fermi level of the metal-organic framework.

Integrating Photoactive Ligands into Crystalline Ultrathin 2D Metal-Organic Framework Nanosheets for Efficient Photoinduced Energy Transfer

3D metal-organic frameworks (MOFs) have gained attention as heterogeneous photocatalysts due to their porosity and unique host-guest interactions. Despite their potential, MOFs face challenges, such as inefficient mass transport and limited light penetration in photoinduced energy transfer processes. Recent advancements in organic photocatalysis have uncovered a variety of photoactive cores, while their heterogenization remains an underexplored area with great potential to build MOFs. This gap is bridged by incorporating photoactive cores into 2D MOF nanosheets, a process that merges the realms of small-molecule photochemistry and MOF chemistry. This approach results in recyclable heterogeneous photocatalysts that exhibit an improved mass transfer efficiency. This research demonstrates a bottom-up synthetic method for embedding photoactive cores into 2D MOF nanosheets, successfully producing variants such as PCN-641-NS, PCN-643-NS, and PCN-644-NS. The synthetic conditions were systematically studied to optimize the crystallinity and morphology of these 2D MOF nanosheets. Enhanced host-guest interactions in these 2D structures were confirmed through various techniques, particularly solid-state NMR studies. Additionally, the efficiency of photoinduced energy transfer in these nanosheets was evidenced through photoborylation reactions and the generation of reactive oxygen species (ROS).

Dual-functionalized two-dimensional metal-organic framework composite with highly hydrophilicity for effective enrichment of glycopeptides

Protein glycosylation research is currently focused on the development of various functionalized materials that can effectively enrich the levels of glycopeptides in samples. However, most of these materials possess limited glycopeptide-specific recognition sites because of large steric hindrance, unsuitable mass transfer kinetics, and relatively low surface areas. Herein, a highly hydrophilic two-dimensional (2-D) metal-organic framework (MOF) nanosheet modified with glutathione (GSH) and l-cysteine (l-Cys) (denoted as Zr-Fc MOF@Au@GC) has been synthesized for efficient glycopeptide enrichment. Using this composite material, 39 and 44 glycopeptides from horseradish peroxidase (HRP) and human serum immunoglobulin G (IgG) digests were detected, respectively, which represents a higher efficiency for glycopeptide enrichment from model glycoprotein digests than has been previously reported. The material Zr-Fc MOF@Au@GC exhibited ultra-high sensitivity (0.1 fmol/µL), excellent selectivity (weight ratio of HRP tryptic digest to bovine serum albumin (BSA) tryptic digest = 1:2000), good binding capacity (200 mg/g), satisfactory reusability, and long-term storage capacity. In addition, 655 glycopeptides corresponding to 366 glycoproteins were identified from human serum samples. To the best of our knowledge, this is the largest number of glycoproteins detected in human serum samples to date. These results indicated that Zr-Fc MOF@Au@GC has the potential to be used for the enrichment of glycopeptides in biological samples and the analysis of protein glycosylation.

Immobilization of Cyclodextrin glycosyltransferase onto three dimensional- hydrophobic and two dimensional- hydrophilic supports: A comparative study

Cyclodextrin glycosyltransferase (CGTase) degrades starch into cyclodextrin via enzymatic activity. In this study, we immobilize CGTase from Thermoanaerobacter sp. on two supports, namely graphene nanoplatelets (GNP) consisting of short stacks of graphene nanoparticles and a calcium-based two-dimensional metal organic framework (Ca-TMA). The uptakes of CGTase on GNP and Ca-TMA reached 40 and 21 mg g-1 respectively, but immobilized CGTase on Ca-TMA showed a higher specific activity (38 U mg-1 ) than that on GNP (28 U mg-1 ). Analysis of secondary structures of CGTase, shows that immobilization reduces the proportion of β-sheets in CGTase from 56% in the free to 49% and 51.3% for GNP and Ca-TMA respectively, α-helix from 38.5% to 18.1 and 37.5%, but led to increased β-turns from 5.5 to 40% and 11.2% for GNP and Ca-TMA, respectively. Lower levels of conformational changes were observed over the more hydrophilic Ca-TMA compared to hydrophobic GNP, resulting in its better activity. Increased β-turns were found to correlate with lower β-CD production, while more β-sheets and α-helix favored more β-CD. Reusability studies revealed that GNP retains up to 74% of initial CGTase activity, while Ca-TMA dropped to 33% after eight consecutive uses. The results obtained in this work provide insight on the effect of support's surface properties on CGTase performance and can assist in developing robust CGTase-based biocatalysts for industrial application.

Synthesis of Electrical Conductive Metal-Organic Frameworks for Electrochemical Applications

Electrical conductivity is very important property of nanomaterials for using wide range of applications especially energy applications. Metal-organic frameworks (MOFs) are notorious for their low electrical conductivity and less considered for usage in pristine forms. However, the advantages of high surface area, porosity and confined catalytic active sites motivated researchers to improve the conductivity of MOFs. Therefore, 2D electrical conductive MOFs (ECMOF) have been widely synthesized by developing the effective synthetic strategies. In this article, we have summarized the recent trends in developing the 2D ECMOFs, following the summary of potential applications in the various fields with future perspectives.

Recent Progress in 2D Metal-Organic Framework-Related Materials

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

Two-Dimensional Porphyrinic Metal-Organic Framework Composites as a Photocatalytic Platform for Chemoselective Hydrogenation

Chemoselective hydrogenation with high efficiency under ambient conditions remains a great challenge. Herein, an efficient photocatalyst, the 2D porphyrin metal-organic framework composite AmPy/Pd-PPF-1(Cu), featuring AmPy (1-aminopyrene) sitting axially on a paddle-wheel unit, has been rationally fabricated. The 2D AmPy/Pd-PPF-1(Cu) composite acts as a photocatalytic platform, promoting the selective hydrogenation of quinolines to tetrahydroquinolines with a yield up to 99%, in which ammonia borane serves as the hydrogen donor. The AmPy molecules coordinated on a 2D MOF not only enhance the light absorption capacity but also adjust the layer spacing without affecting the network structure of 2D Pd-PPF-1(Cu) nanosheets. Through deuterium-labeling experiments, in situ X-ray photoelectron spectroscopy, electron paramagnetic resonance studies, and density functional theory calculations, it is disclosed that Cu paddle-wheel units in 2D AmPy/Pd-PPF-1(Cu) nanosheets behave as the active site for transfer hydrogenation, and metalloporphyrin ligand and axial aminopyrene molecules can enhance the light absorption capacity and excite photogenerated electrons to Cu paddle-wheel units, assisting in photocatalysis.

Room-Temperature Synthesized Iron/Cobalt Metal-Organic Framework Nanosheets with Highly Efficient Catalytic Activity toward Luminol Chemiluminescence Reaction

Two-dimensional (2D) iron/cobalt metal-organic framework nanosheets (Fe/Co-MOF NSs) were synthesized via the cooperative self-assembly reaction of Fe3+/Co2+ and terephthalic acid at room temperature. The as-prepared 2D Fe/Co-MOF NSs display superior performance in catalysis of the chemiluminescence (CL) reaction between luminol and H2O2. The CL spectrum, UV-vis absorption spectroscopy, radical scavenger experiments, and electron spin resonance (ESR) spectroscopy are utilized to research the possible CL mechanism of the luminol-H2O2-Fe/Co-MOF NSs system. All results indicate that Fe/Co-MOF NSs present outstanding peroxidase-like activity and could catalyze H2O2 to produce 1O2, O2·-, and ·OH, which could react rapidly with the luminol anion radical and result in strong CL. With the highly efficient CL of the luminol-H2O2-Fe/Co-MOF NSs system, a sensitive sensor for the detection of dopamine (DA) is developed based on the inhibitory effect of DA on the CL intensity. Good linearity over the range of 50-800 nM is achieved with a limit of detection of 20.88 nM (S/N = 3). This research demonstrates that 2D Fe/Co-MOF NSs is a highly effective catalyst for luminol CL reaction and has great application potential in the CL field.

Versatile Structural Engineering of Metal-Organic Frameworks Enabling Switchable Catalytic Selectivity

The structure engineering of metal-organic frameworks (MOFs) forms the cornerstone of their applications. Nonetheless, realizing the simultaneous versatile structure engineering of MOFs remains a significant challenge. Herein, a dynamically mediated synthesis strategy to simultaneously engineer the crystal structure, defect structure, and nanostructure of MOFs is proposed. These include amorphous Zr-ODB nanoparticles, crystalline Zr-ODB-hz (ODB = 4,4'-oxalyldibenzoate, hz = hydrazine) nanosheets, and defective d-Zr-ODB-hz nanosheets. Aberration-corrected scanning transmission electron microscopy combined with low-dose high-angle annular dark-field imaging technique vividly portrays these engineered structures. Concurrently, the introduced hydrazine moieties confer self-reduction properties to the respective MOF structures, allowing the in situ installation of catalytic Pd nanoparticles. Remarkably, in the hydrogenation of vanillin-like biomass derivatives, Pd/Zr-ODB-hz yields partially hydrogenated alcohols as the primary products, whereas Pd/d-Zr-ODB-hz exclusively produces fully hydrogenated alkanes. Density functional theory calculations, coupled with experimental evidence, uncover the catalytic selectivity switch triggered by the change in structure type. The proposed strategy of versatile structure engineering of MOFs introduces an innovative pathway for the development of high-performance MOF-based catalysts for various reactions.