The peculiar effect of water on ionic liquids and deep eutectic solvents

Stabilization of Non-Native Folds and Programmable Protein Gelation in Compositionally Designed Deep Eutectic Solvents

Proteins are adjustable units from which biomaterials with designed properties can be developed. However, non-native folded states with controlled topologies are hardly accessible in aqueous environments, limiting their prospects as building blocks. Here, we demonstrate the ability of a series of anhydrous deep eutectic solvents (DESs) to precisely control the conformational landscape of proteins. We reveal that systematic variations in the chemical composition of binary and ternary DESs dictate the stabilization of a wide range of conformations, that is, compact globular folds, intermediate folding states, or unfolded chains, as well as controlling their collective behavior. Besides, different conformational states can be visited by simply adjusting the composition of ternary DESs, allowing for the refolding of unfolded states and vice versa. Notably, we show that these intermediates can trigger the formation of supramolecular gels, also known as eutectogels, where their mechanical properties correlate to the folding state of the protein. Given the inherent vulnerability of proteins outside the native fold in aqueous environments, our findings highlight DESs as tailorable solvents capable of stabilizing various non-native conformations on demand through solvent design.

Scattering approaches to unravel protein solution behaviors in ionic liquids and deep eutectic solvents: From basic principles to recent developments

Proteins in ionic liquids (ILs) and deep eutectic solvents (DESs) have gained significant attention due to their potential applications in various fields, including biocatalysis, bioseparation, biomolecular delivery, and structural biology. Scattering approaches including dynamic light scattering (DLS) and small-angle X-ray and neutron scattering (SAXS and SANS) have been used to understand the solution behavior of proteins at the nanoscale and microscale. This review provides a thorough exploration of the application of these scattering techniques to elucidate protein properties in ILs and DESs. Specifically, the review begins with the theoretical foundations of the relevant scattering approaches and describes the essential solvent properties of ILs and DESs linked to scattering such as refractive index, scattering length density, ion-pairs, liquid nanostructure, solvent aggregation, and specific ion effects. Next, a detailed introduction is provided on protein properties such as type, concentration, size, flexibility and structure as observed through scattering methodologies. This is followed by a review of the literature on the use of scattering for proteins in ILs and DESs. It is highlighted that enhanced data analysis and modeling tools are necessary for assessing protein flexibility and structure, and for understanding protein hydration, aggregation and specific ion effects. It is also noted that complementary approaches are recommended for comprehensively understanding the behavior of proteins in solution due to the complex interplay of factors, including ion-binding, dynamic hydration, intermolecular interactions, and specific ion effects. Finally, the challenges and potential research directions for this field are proposed, including experimental design, data analysis approaches, and supporting methods to obtain fundamental understandings of complex protein behavior and protein systems in solution. We envisage that this review will support further studies of protein interface science, and in particular studies on solvent and ion effects on proteins.

Recent advances in zinc-ion dehydration strategies for optimized Zn-metal batteries

Aqueous Zn-metal batteries have attracted increasing interest for large-scale energy storage owing to their outstanding merits in terms of safety, cost and production. However, they constantly suffer from inadequate energy density and poor cycling stability due to the presence of zinc ions in the fully hydrated solvation state. Thus, designing the dehydrated solvation structure of zinc ions can effectively address the current drawbacks of aqueous Zn-metal batteries. In this case, considering the lack of studies focused on strategies for the dehydration of zinc ions, herein, we present a systematic and comprehensive review to deepen the understanding of zinc-ion solvation regulation. Two fundamental design principles of component regulation and pre-desolvation are summarized in terms of solvation environment formation and interfacial desolvation behavior. Subsequently, specific strategy based distinct principles are carefully discussed, including preparation methods, working mechanisms, analysis approaches and performance improvements. Finally, we present a general summary of the issues addressed using zinc-ion dehydration strategies, and four critical aspects to promote zinc-ion solvation regulation are presented as an outlook, involving updating (de)solvation theories, revealing interfacial evolution, enhancing analysis techniques and developing functional materials. We believe that this review will not only stimulate more creativity in optimizing aqueous electrolytes but also provide valuable insights into designing other battery systems.

Assessing Viscosity in Sustainable Deep Eutectic Solvents and Cosolvent Mixtures: An Artificial Neural Network-Based Molecular Approach

Deep eutectic solvents (DESs) are gaining recognition as environmentally friendly solvent alternatives for diverse chemical processes. Yet, designing DESs tailored to specific applications is a resource-intensive task, which requires an accurate estimation of their physicochemical properties. Among them, viscosity is crucial, as it often dictates a DES's suitability as a solvent. In this study, an artificial neural network (ANN) is introduced to accurately describe the viscosity of DESs and their mixtures with cosolvents. The ANN utilizes molecular parameters derived from σ-profiles, computed using the conductor-like screening model for the real solvent segment activity coefficient (COSMO-SAC). The data set comprises 1891 experimental viscosity measurements for 48 DESs based on choline chloride, encompassing 279 different compositions, along with 1618 data points of DES mixtures with cosolvents as water, methanol, isopropanol, and dimethyl sulfoxide, covering a wide range of viscosity measurements from 0.3862 to 4722 mPa s. The optimal ANN structure for describing the logarithmic viscosity of DESs is configured as 9-19-16-1, achieving an overall average absolute relative deviation of 1.6031%. More importantly, the ANN shows a remarkable extrapolation capacity, as it is capable of predicting the viscosity of systems including solvents (ethanol) and hydrogen bond donors (2,3-butanediol) not considered in the training. The ANN model also demonstrates an extensive applicability domain, covering 94.17% of the entire database. These achievements represent a significant step forward in developing robust, open source, and highly accurate models for DESs using molecular descriptors.

Addressing the Reuse of Deep Eutectic Solvents in Li-Ion Battery Recycling: Insights into Dissolution Mechanism, Metal Recovery, Regeneration and Decomposition

Deep eutectic solvents (DESs) have garnered attention in Li-ion battery (LIB) recycling due to their declared eco-friendly attributes and adjustable metal dissolution selectivity, offering a promising avenue for recycling processes. However, DESs currently lack competitiveness compared to mineral acids, commonly used in industrial-scale LIB recycling. Current research primarily focuses on optimizing DES formulation and experimental conditions to maximize metal dissolution yields in standalone leaching experiments. While achieving yields comparable to traditional leaching systems is important, extensive DES reuse is vital for overall recycling feasibility. To achieve this, evaluating the metal dissolution mechanism can assist in estimating DES consumption rates and assessing process makeup stream costs. The selection of appropriate metal recovery and DES regeneration strategies is essential to enable subsequent reuse over multiple cycles. Finally, decomposition of DES components should be avoided throughout the designed recycling process, as by-products can impact leaching efficiency and compromise the safety and environmental friendliness of DES. In this review, these aspects are emphasized with the aim of directing research efforts away from simply pursuing the maximization of metal dissolution efficiency, towards a broader view focusing on the application of DES beyond the laboratory scale.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Key Experimental Considerations When Evaluating Functional Ionic Liquids for Combined Capture and Electrochemical Conversion of CO2

Ionic liquids (ILs) are considered functional electrolytes for the electrocatalytic reduction of CO2 (ECO2R) due to their role in the double-layer structure formation and increased CO2 availability at the electrode surface, which reduces the voltage requirement. However, not all ILs are the same, considering the purity and degree of the functionality of the IL. Further, there are critical experimental factors that impact the evaluation of ILs for ECO2R including the reference electrode, working electrode construction, cosolvent selection, cell geometry, and whether the electrochemical cell is a single compartment or a divided cell. Here, we describe improved synthesis methods of imidazolium cyanopyrrolide IL for electrochemical studies in consideration of precursor composition and reaction time. We explored how IL with cosolvents (i.e. acetonitrile, dimethylformamide, dimethyl sulfoxide, propylene carbonate, and n-methyl-2-pyrrolidone) affects conductivity, CO2 mass transport, and ECO2R activation overpotential together with the effects of electrode materials (Sn, Ag, Au, and glassy carbon). Acetonitrile was found to be the best solvent for lowering the onset potential and increasing the catalytic current density for the production of CO owing to the enhanced ion mobility in combination with the silver electrode. Further, the ECO2R activity of molecular catalysts Ni(cyclam)Cl2 and iron tetraphenylsulfonato porphyrin (FeTPPS) on the carbon cloth electrode maintained high Faradaic efficiencies for CO in the presence of the IL. This study presents best practices for examining nontraditional multifunctional electrolytes amenable to integrated CO2 capture and conversion technologies for homogeneous and heterogeneous ECO2R.

Cation Chain Length of Nonhalogenated Ionic Liquids Matters in Enhancing SERS of Cytochrome c on Zr-Al-Co-O Nanotube Arrays

Surface-enhanced Raman scattering (SERS) is a remarkably powerful analytical technique enabling trace-level detection of biological molecules. The interaction of a probe molecule with the SERS substrate shows important distinctions in the SERS spectra, providing inherent fingerprint information on the probe molecule. Herein, nonhalogenated phosphonium-based ionic liquids (ILs) containing cations with varying chain lengths were used as trace additives to amplify the interaction between the cytochrome c (Cyt c) and Zr-Al-Co-O (ZACO) nanotube arrays, strengthening the SERS signals. An increased enhancement factor (EF) by 2.5-41.2 times compared with the system without ILs was achieved. The improvement of the SERS sensitivity with the introduction of these ILs is strongly dependent on the cation chain length, in which the increasing magnitude of EF is more pronounced in the system with a longer alkyl chain length on the cation. Comparing the interaction forces measured by Cyt c-grafted atomic force microscopy (AFM) probes on ZACO substrates with those predicted by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the van der Waals forces became increasingly dominant as the chain length of the cations increased, associated with stronger Cyt c-ZACO XDLVO interaction forces. The major contributing component, van der Waals force, stems from the longer cation chains of the IL, which act as a bridge to connect Cyt c and the ZACO substrate, promoting the anchoring of the Cyt c molecules onto the substrate, thereby benefiting SERS enhancement.

Importance of the Electrostatic Correlations in Surface Tension of Hydrated Reline Deep Eutectic Solvent from Combined Experiments and Molecular Dynamics Simulations

In this study, the surface tension and the structure of hydrated reline are investigated by using diverse methods. Initially, the surface tension displays a nonlinear pattern as water content increases, decreasing until reaching 45 wt %, then gradually matching that of pure water. This fluctuation is associated with strong electrostatic correlations present in pure reline, which decrease as more water is added. Changes in surface tension reflect a shift from charge layering in pure reline to an increased interfacial hydrogen bonding as the water content rises. This shift causes the segregation of urea molecules into the bulk phase and a gradual anchoring of water molecules to the air-reline interface. An interesting observation is the antisurfactant effect, where heightened interfacial anchoring results in an unexpected increase in real contribution of surface tension. This, along with weakened electrostatic correlations beyond 45 wt % due to reinforced interfacial hydrogen bonding, contributes to the complex behavior of surface tension observed in this study.

Do Electrostatics Control the Diffusive Dynamics of Solitary Water? NMR and MD Studies of Water Translation and Rotation in Dipolar and Ionic Solvents

NMR-based measurements of the diffusion coefficients and rotation times of solitary water and benzene at 300 K are reported in a diverse collection of 13 conventional organic solvents and 10 imidazolium ionic liquids. Proton chemical shifts of water are found to be correlated to water OH-stretching frequencies, confirming the importance of electrostatic interactions in these shifts. However, the influence of magnetic interactions in aromatic solvents renders chemical shifts a less reliable indicator of electrostatics. Diffusion coefficients (DB) and rotational correlation times (τB) of benzene in the solvents examined are accurately described as functions of viscosity (η) by DB ∝ η-0.81 and τB ∝ η0.64. Literature values of DB and τB in alkane and normal alcohols, which were not included among the solvents studied here, are systematically faster than predicted by these correlations, indicating that factors beyond solvent viscosity play a role in determining the friction on benzene. In contrast to benzene, water diffusion and rotation are poorly described in terms of viscosity alone, even in the dipolar and ionic solvents measured here. The present data and the substantial literature data already available on dilute water diffusion show a systematic dependence of DW on solvent polarity among isoviscous solvents. The aspect of solvent polarity most relevant to water dynamics is the ability of a solvent to accept hydrogen bonds from water, as conveniently quantified by the frequency of water's OH stretching band, ΔνOH. The friction on translation, ζtr = kBT/DW, and rotation, ζrot = kBTτW, are both well correlated by functions of the form ζ(η, ΔνOH) = a1ηa2 exp (a3ΔνOH), where the ai are adjustable parameters. Molecular dynamics simulations reveal a strong coupling between electrostatic and nonelectrostatic water-solvent interactions, which makes it impossible to dissect the friction on water into additive dielectric and hydrodynamic components. Simulations also provide a tentative explanation for the unusual form of the correlating function ζ(η, ΔνOH), at least in the case of ζrot.

Deep Eutectic Solvents for Efficient and Selective Extraction of α-Glucosidase Inhibitors from Waste Seeds of Refined Betel Nuts

During the production process of refined betel nuts in China, a large amount of processing by-product, betel nut waste seeds, is generated. Betel nut waste seeds are rich in bioactive elements, but they have not been effectively utilized yet. In this study, an ultrasonic-assisted deep eutectic solvent method (DES) was used to selectively extract α-glucosidase inhibitors from waste seeds. Compared with traditional extraction solvents such as water and ethanol, the extraction efficiency of specific DESs is higher, and the content of alkaloids in the extracts is lower. However, it should be noted that some pure DESs exhibit inhibitory activity towards α-glucosidase. DESs, based on choline chloride/urea, were selected due to the high extraction efficiency of α-glucosidase inhibitors and their low alkaloid content as well as low inhibitory activity. The optimal extraction conditions were determined using single-factor experiments as follows: 30% (v/v) water content, a choline chloride/urea ratio of 5:3, a solid-liquid ratio of 1:10, extraction temperature of 40 °C, and a duration of 30 min. Through recovery experiments, it was found that the DES can be reused four times under these conditions, maintaining an inhibition rate comparable to alcohol extraction methods. The IC50 value of the extract was measured at 0.0066 mg/mL, superior to acarbose. In summary, this research has successfully developed an efficient and selective method for extracting α-glucosidase inhibitors from betel nut waste seeds, thereby presenting a promising avenue for future applications.

Unusual Hydration Properties of Choline Fluoride-Based Deep Eutectic Solvents

The hydration properties of the fluoride-based deep eutectic solvent ethalineF [a solution of choline fluoride in ethylene glycol (EG) at a 1:2 molar ratio] are studied and compared to the most common deep eutectic solvent ethaline (the solution of choline chloride in EG at 1:2 molar ratio). The densities of the deep eutectic solvent (DES) based on choline fluoride in EG (ethalineF) and its mixtures with water as cosolvent are measured over the temperature range of 298-323 K. The excess properties, including excess molar volumes, excess partial molar volumes, and viscosity deviations from ideal behavior, are calculated for ethalineF/water and ethaline/water mixtures and compared. The experimental excess molar volumes and viscosity deviations of the studied pseudobinary mixtures are fitted using the Redlich-Kister (R-K) equation. The results of the R-K model successfully reproduced the experimentally calculated values with minimal standard deviations. All excess molar volumes and viscosity deviations had negative values, indicating stronger solvation interactions between the mixture components than between each pure DES or water. The excess partial molar volumes show that water molecules are preferentially solvated by the DES environment. We show that the disruption of the DES interactions (primarily OH...halide interactions) by high mole fractions of water is related to the peak ionic conductivity. The stark differences in hydration behavior between fluoride- and chloride-based ethaline are analyzed and discussed.

Translational and reorientational dynamics in carboxylic acid-based deep eutectic solvents

The glass formation and the dipolar reorientational motions in deep eutectic solvents (DESs) are frequently overlooked, despite their crucial role in defining the room-temperature physiochemical properties. To understand the effects of these dynamics on the ionic conductivity and their relation to the mechanical properties of the DES, we conducted broadband dielectric and rheological spectroscopy over a wide temperature range on three well-established carboxylic acid-based natural DESs. These are the eutectic mixtures of choline chloride with oxalic acid (oxaline), malonic acid (maline), and phenylacetic acid (phenylaceline). In all three DESs, we observe signs of a glass transition in the temperature dependence of their dipolar reorientational and structural dynamics, as well as varying degrees of motional decoupling between the different observed dynamics. Maline and oxaline display a breaking of the Walden rule near the glass-transition temperature, while the relation between the dc conductivity and dipolar relaxation time in both maline and phenylaceline is best described by a power law. The glass-forming properties of the investigated systems not only govern the orientational dipolar motions and rheological properties, which are of interest from a fundamental point of view, but they also affect the dc conductivity, even at room temperature, which is of high technical relevance.

Toxicity test profile for deep eutectic solvents: A detailed review and future prospects

Deep eutectic solvents (DESs) are preferable in terms of starting materials, storage and synthesis, simplicity, and component material affordability. In several industries ranging from chemical, electrochemical, biological, biotechnology, material science, etc., DES has demonstrated remarkable potential. Despite all these accomplishments, the safety issue with DES must be adequately addressed. Different DES interacts with the cellular membranes differently. It is not possible to classify all DES as easily biodegradable. By expanding the current understanding of the toxicity and biodegradation of DES, interactions between organisms and cellular membranes can be linked. The DES toxicity profile varies according to their concentration, the nature of the individual components, and how they interact with living things. Therefore, the results of this review can serve as a baseline for DES development in the future.

Recyclable water-modified deep eutectic solvents for removal of multiple heavy metals from soil

Removing heavy metals from soil has always been a challenge in terms of safety and effectiveness. Deep eutectic solvents (DESs) are recognized as environmentally friendly reagents with great potential in the removal of heavy metals from soil. In this study, water was introduced as a third component to form new ternary deep eutectic water solvents (DEWSs) to improve their performance. The removal capacity, applicable conditions and mechanisms of sixteen DEWSs for heavy metals were systematically investigated. Experimental results showed that the presence of water significantly enhanced the removal efficiency of three DESs (Choline chloride plus Urea, DEU; Choline chloride plus l-lactic acid, DELA; and Choline chloride plus Ethylene glycol, DEEG) for heavy metals. However, as the molar ratio of water increased, the eutectic systems in the DEWSs weakened and eventually disappeared. Under optimum conditions, DEWLA7 (DELA : H2O = 2 : 8) showed the highest removal rate for cadmium, lead, copper and zinc, which were 43.42%, 94.73%, 90.72% and 96.44%, respectively. Hydrogen bonding, adsorption of oxygen functional groups, exchangeable hydrogen substitution, changes in viscosity properties and co-precipitation all contributed to the removal of heavy metals by DEWLA7. Notably, DEWLA7 had no significant effect on the content of major minerals and nutrients in the soil. Furthermore, DEWLA7 proved to be reusable for soil washing, and still retains a high removal rate of 37.32%-83.66% after multi-stage filtration treatment. Therefore, DEWLA7 was an unexplored and excellent soil washing agent with great potential in economic and social benefits.

Effects of Ionic Liquids on the Cylindrical Self-Assemblies Formed by Poly(ethylene oxide)-Poly(propylene oxide)-Poly(ethylene oxide) Block Copolymers in Water

Aiming at the fundamental understanding of solvent effects in amphiphilic polymer systems, we considered poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in water mixed with an ionic liquid-ethylammonium nitrate (EAN), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6), or 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4)-and we investigated the hexagonal lyotropic liquid crystal structures by means of small-angle X-ray scattering (SAXS). At 50% polymer, the hexagonal structure (cylinders of self-assembled block copolymer) was maintained across the solvent mixing ratio. The effects of the ionic liquids were reflected in the characteristic length scales of the hexagonal structure and were interpreted in terms of the location of the ionic liquid in the self-assembled block copolymer domains. The protic ionic liquid EAN was evenly distributed within the aqueous domains and showed no affinity for the interface, whereas BMIMPF6 preferred to swell PEO and was located at the interface so as to reduce contact with water. BMIMBF4 was also interfacially active, but to a lesser extent.

Physicochemical Properties of Choline Chloride/Acetic Acid as a Deep Eutectic Solvent and Its Binary Solutions with DMSO at 298.15 to 353.15 K

Deep eutectic solvents (DESs) are considered to play an important role in green chemistry and other technological fields as an alternative to organic solvents. The present study reports measurements of density (ρ), speed of sound (u), dynamic viscosity (η), and electrical conductivity (κ) and investigates physicochemical properties of choline chloride/acetic acid (ChCl/AcA DES) and its binary mixtures with dimethyl sulfoxide (DMSO) over the entire composition and temperature (298.15-353.15 K) range. The density data are well fitted by a second-degree polynomial equation in T. DES/DMSO mixtures exhibit negative excess molar volume and isentropic compressibility deviation with a minimum in respective curves at x1 ≈ 0.15 (x1 is the mole fraction of DES in the mixture), which became deeper with increasing temperature. The ChCl/AcA DES and DMSO curves for excess partial molar volume cross each other at x1 ≈ 0.15, showing that the packing effect is dominant over specific interactions. A similar behavior is observed for excess molar viscosity, showing the minima at x1 ≈ 0.62, and substantiates volumetric results. The temperature dependence of viscosity and conductivity is well described by the Vogel-Fulcher-Tammann (VFT) equation.

Ecofriendly Preparation of Rosmarinic Acid-poly(vinyl alcohol) Biofilms Using NADES/DES, Ultrasounds and Optimization via a Mixture-Process Design Strategy

Green chemistry emphasizes the isolation of biologically active compounds from plants and biomass to produce renewable, bio-based products and materials through sustainability and circularity-driven innovation processes. In this work, we have investigated the extraction of rosmarinic acid (RA), a phenolic acid with several biological properties, from aromatic herbs using ultrasounds and low environmental risk natural deep eutectic solvents (NADES). Various solvent mixtures have been investigated, and the parameters influencing the process have been studied by a mixture-process experimental design to identify the optimal RA extraction conditions. The extraction yield has been calculated by HPLC-diode array analysis. The lactic acid:ethylene glycol mixture using an ultrasound-assisted process has been found to be the most versatile solvent system, giving RA yields 127-160% higher than hydroalcoholic extraction (70% ethanol). The deep eutectic solvent nature of lactic acid:ethylene glycol has been demonstrated for the first time by multi-technique characterization (1H-NMR and 13C-NMR, DSC, and W absorption properties). The aqueous raw extract has been directly incorporated into poly(vinyl alcohol) to obtain films with potential antibacterial properties for applications in the field of food and pharmaceutical packaging.

Local and cooperative structural transitions of double-stranded DNA in choline-based deep eutectic solvents

The possibility of using deep eutectic solvents (DESs) as co-solvents for stabilizing and preserving the native structure of DNA provides an attractive opportunity in the field of DNA biotechnology. The rationale of this work is a systematic investigation of the effect of hydrated choline-based DES on the structural stability of a 30-base-pair double-stranded DNA model via a combination of spectroscopic experiments and MD simulations. UV absorption and CD experiments provide evidence of a significant contribution of DESs to the stabilization of the double-stranded canonical (B-form) DNA structure. Multi-wavelength synchrotron UV Resonance Raman (UVRR) measurements indicate that the hydration shell of adenine-thymine pairs is strongly perturbed in the presence of DESs and that the preferential interaction between H-bond sites of guanine residues and DESs is significantly involved in the stabilization of the dsDNA. Finally, MD calculations show that the minor groove of DNA is significantly selective for the choline part of the investigated DESs compared to the major groove. This finding is likely to have a significant impact not only in terms of thermal stability but also in the modulation of ligand-DNA interactions.

Understanding the intricacy of protein in hydrated deep eutectic solvent: Solvation dynamics, conformational fluctuation dynamics, and stability

Deep eutectic solvents (DESs) are potential biocatalytic media due to their easy preparation, fine-tuneability, biocompatibility, and most importantly, due to their ability to keep protein stable and active. However, there are many unanswered questions and gaps in our knowledge about how proteins behave in these alternate media. Herein, we investigated solvation dynamics, conformational fluctuation dynamics, and stability of human serum albumin (HSA) in 0.5 Acetamide/0.3 Urea/0.2 Sorbitol (0.5Ac/0.3Ur/0.2Sor) DES of varying concentrations to understand the intricacy of protein behaviour in DES. Our result revealed a gradual decrease in the side-chain flexibility and thermal stability of HSA beyond 30 % DES. On the other hand, the associated water dynamics around domain-I of HSA decelerate only marginally with increasing DES content, although viscosity rises considerably. We propose that even though macroscopic solvent properties are altered, a protein feels only an aqueous type of environment in the presence of DES. This is probably the first experimental study to delineate the role of the associated water structure of the enzyme for maintaining its stability inside DES. Although considerable effort is necessary to generalize such claims, it might serve as the basis for understanding why proteins remain stable and active in DES.

Porous Core-membrane Microstructured Nanomaterial Composed of Deep Eutectic Solvents and MOF-808 for CO2 Capture

A series of porous core-membrane microstructured nanomaterials, constructed of a deep eutectic solvent (DES) membrane and porous MOF-808 core via liquid surface tensions and electrostatic interactions, are introduced for carbon dioxide capture with the sorption mechanism coupling diffusion, physisorption, and chemisorption. MOF-808 as the porous core considerably improves the diffusion interactions for DES membranes, hence significantly enhancing the sorption performance of DESs. Although the DES consisted by monoethanolamine and tetrapropylammonium chloride (MEA-TPAC-7) has the highest sorption capacity among all DESs, it is only 4.39 mmol g-1 at 2.4 bar and further attenuates by fastidious diffusion interactions when increasing viscosity or dose. The sorption capacities of DES@MOF-120 are 5.18 mmol g-1 at 3.0 bar and 4.78 mmol g-1 at 2.4 bar without apparent sorption hysteresis in pressure swing sorption, which are substantially improved contrasted to MEA-TPAC-7. The sorption isotherms are reconstructed via Sips models considering surface heterogeneity with regression correlation coefficients over 0.9454 to forecast maximum sorption capacity over 6.33 mmol g-1 .

Nature of a Tetrabutylammonium Chloride-Levulinic Acid Deep Eutectic Solvent

A deep eutectic solvent was formed by considering the mixtures of tetrabutylammonium chloride and levulinic acid, and it is studied via a combined theoretical and experimental approach. Physicochemical properties were measured as a function of temperature, providing a macroscopic characterization of the fluid. Quantum chemistry and classical molecular dynamics simulations were carried out for the nanoscopic characterization, providing attention to the nature, extension, and dynamics of the hydrogen bonding network, which is at the root of the properties of the fluid. The reported study allows multiscale characterization of this fluid as an archetypical example of a natural, low-cost, and sustainable fluid.

Fractionation and evaluation of light-colored lignin extracted from bamboo shoot shells using hydrated deep eutectic solvents

In this study, light-colored lignin was extracted from bamboo shoot shells (BSS) using a hydrated deep eutectic solvent (DES) pretreatment. The hydrated DES used in pretreatment consist of formic acid, benzyl triethylammonium chloride (BTEAC) and water. The pretreatment using a hydrated DES containing 30% water (H30) demonstrate efficient delignification (82.9%). Additionally, the hydrated DES protected the β-O-4 linkage from excessive cleavage and recondensation as well as keep the light-colored of lignin. Moreover, the hydrated DES extracted lignin exhibits superior antioxidant performance and tyrosinase inhibitory capacity compared to the control. Notably, incorporating 5% lignin of H30-extracted lignin into a commercial suncream led to a remarkable enhancement of the SPF value, elevating from 14.8 to 32.6. In summary, the proposed hydrated DES pretreatment method offers significant benefits for extracting light-colored lignin, thereby promoting the multifunctional application of lignin in cosmetics.

Untapped Potential of Deep Eutectic Solvents for the Synthesis of Bioinspired Inorganic-Organic Materials

Since the discovery of deep eutectic solvents (DESs) in 2003, significant progress has been made in the field, specifically advancing aspects of their preparation and physicochemical characterization. Their low-cost and unique tailored properties are reasons for their growing importance as a sustainable medium for the resource-efficient processing and synthesis of advanced materials. In this paper, the significance of these designer solvents and their beneficial features, in particular with respect to biomimetic materials chemistry, is discussed. Finally, this article explores the unrealized potential and advantageous aspects of DESs, focusing on the development of biomineralization-inspired hybrid materials. It is anticipated that this article can stimulate new concepts and advances providing a reference for breaking down the multidisciplinary borders in the field of bioinspired materials chemistry, especially at the nexus of computation and experiment, and to develop a rigorous materials-by-design paradigm.

Water Induced Alterations in Self-Assembly of a Bio-Surfactant in Deep Eutectic Solvent for Enhanced Enzyme Activity

Deep eutectic solvents (DESs) meet important requirements for green solvent technology, including non-toxicity, biodegradability, sustainability, and affordability. Despite possessing low cohesive energy density than water, DESs have been found to support the self-assembly of amphiphiles. It is very much pertinent to examine the effect of water on self-assembly of surfactants in DESs as the presence of water alters the inherent structure of DES, which is expected to affect the characteristic properties of self-assembly. Following this, we have investigated the self-assembly of amino-acid based surfactant, Sodium N-lauroyl sarcosinate (SLS), in DES-water mixtures (10, 30 and 50 w/w% of water) and explored the catalytic activity of Cytochrome-c (Cyt-c) in the formed colloidal systems. Investigations using surface tension, fluorescence, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC) have shown that DES-water mixtures promote the aggregation of SLS, resulting in the lower critical aggregation concentration (cac ∼1.5-6-fold) of the surfactant as compared to water. The nanoclustering of DES at low water content and it's complete de-structuring at high water content affects the self-assembly in a contrasting manner governed by different set of interactions. Further, Cyt-c dispersed in DES-water colloidal solutions demonstrated 5-fold higher peroxidase activity than that observed in phosphate buffer.

Molecular Architecture Effects on Bulk Nanostructure in Bis(Orthoborate) Ionic Liquids

A series of 19 ionic liquids (ILs) based on phosphonium and imidazolium cations of varying alkyl-chain lengths with the orthoborate anions bis(oxalato)borate [BOB]- , bis(mandelato)borate, [BMB]- and bis(salicylato)borate, [BScB]- , are synthesized and studied using small-angle neutron scattering (SANS). All measured systems display nanostructuring, with 1-methyl-3-n-alkyl imidazolium-orthoborates forming clearly bicontinuous L3 spongelike phases when the alkyl chains are longer than C6 (hexyl). L3 phases are fitted using the Teubner and Strey model, and diffusely-nanostructured systems are primarily fitted using the Ornstein-Zernicke correlation length model. Strongly-nanostructured systems have a strong dependence on the cation, with molecular architecture variation explored to determine the driving forces for self-assembly. The ability to form well-defined complex phases is effectively extinguished in several ways: methylation of the most acidic imidazolium ring proton, replacing the imidazolium 3-methyl group with a longer hydrocarbon chain, substitution of [BOB]- by [BMB]- , or exchanging the imidazolium for phosphonium systems, irrespective of phosphonium architecture. The results suggest there is only a small window of opportunity, in terms of molecular amphiphilicity and cation:anion volume matching, for the formation of stable extensive bicontinuous domains in pure bulk orthoborate-based ILs. Particularly important for self-assembly processes appear to be the ability to form H-bonding networks, which offer additional versatility in imidazolium systems.

Multiscale Conceptual Design of a Scalable and Sustainable Process to Dissolve and Regenerate Keratin from Chicken Feathers

A multiscale strategy was used to conceptually design and economically analyze a scalable and sustainable process for dissolving and regenerating keratin from chicken feathers by using a sodium acetate-urea deep eutectic solvent as the reacting media. In this study, the recovery and recycling of the solvent were also considered. Moreover, molecular modeling of the solvent, keratin and its derivatives, property estimation of the corresponding mixtures, and simulation of the different process alternatives proposed, including the equipment sizing, estimation of energy needs, and economic analysis were presented. A quasi-planar cluster governed by H-bond interactions resulted in the most stable configuration of the deep eutectic solvent. Molecular models having molecular weights higher than 1.400 g/mol were created to represent the keratin species, where the most abundant amino acids in the feathers were included and conveniently ordered in the chain. Property estimations performed with the conductor-like screening model-real solvent succeeded in describing the main features of the interactions between the keratin derivatives and the solvents used. The process analysis performed on several alternatives showed that the process is technically and economically viable at the industrial scale, the costs being strongly dependent on the excess of both the solvent used to dissolve keratin and the water added for its regeneration. Several options to improve the process and reduce the costs are discussed.

Dissolution mechanism of cellulose in a benzyltriethylammonium/urea deep eutectic solvent (DES): DFT-quantum modeling, molecular dynamics and experimental investigation

In this paper, a benzyltriethylammonium/urea DES was investigated as a new green and eco-friendly medium for the progress of organic chemical reactions, particularly the dissolution and the functionalization of cellulose. In this regard, the viscosity-average molecular weight of cellulose (M̄w) during the dissolution/regeneration process was investigated, showing no significant degradation of the polymer chains. Moreover, X-ray diffraction patterns indicated that the cellulose dissolution process in the BTEAB/urea DES decreased the crystallinity index from 87% to 75%, and there was no effect on type I cellulose polymorphism. However, a drastic impact of the cosolvents (water and DMSO) on the melting point of the DES was observed. Besides, to understand the evolution of cellulose-DES interactions, the formation mechanism of the system was studied in terms of H-bond density and radial distribution function (RDF) using molecular dynamics modeling. Furthermore, density functional theory (DFT) was used to evaluate the topological characteristics of the polymeric system such as potential energy density (PED), laplacian electron density (LED), energy density, and kinetic energy density (KED) at bond critical points (BCPs) between the cellulose and the DES. The quantum theory of atoms in molecules (AIM), Bader's quantum theory (BQT), and reduced density gradient (RDG) scatter plots have been exploited to estimate and locate non-covalent interactions (NCIs). The results revealed that the dissolution process is attributed to the physical interactions, mainly the strong H-bond interactions.

DNA nanotechnology in ionic liquids and deep eutectic solvents

Nucleic acids have the ability to generate advanced nanostructures in a controlled manner and can interact with target sequences or molecules with high affinity and selectivity. For this reason, they have applications in a variety of nanotechnology applications, from highly specific sensors to smart nanomachines and even in other applications such as enantioselective catalysis or drug delivery systems. However, a common disadvantage is the use of water as the ubiquitous solvent. The use of nucleic acids in non-aqueous solvents offers the opportunity to create a completely new toolbox with unprecedented degrees of freedom. Ionic liquids (ILs) and deep eutectic solvents (DESs) are the most promising alternative solvents due to their unique electrolyte and solvent roles, as well as their ability to maintain the stability and functionality of nucleic acids. This review aims to be a comprehensive, critical, and accessible evaluation of how much this goal has been achieved and what are the most critical parameters for accomplishing a breakthrough.

Ionic liquid as hydrogen bond acceptor in the extraction of nutritional natural products

In-depth studies of the extraction mechanism using deep eutectic solvents (DES), especially extraction through the formation of a deep eutectic system (DESys), revealed commonalities between the DES- and ionic liquids (IL)-based extraction systems. New applications of ILs and DES for extraction of nutritional natural products were presented. In this study, the extraction behavior of choline chloride (ChCl) and 1-(2-hydroxyethyl)-3-methylimidazolium chloride ([HMIm][Cl]) in DES and IL, respectively, in mechanochemical extraction of target compounds from Moringa oleifera leaves was systematically studied. The results suggested that both extraction methods were based on the formation of a DESys, either a normal DESys or an IL DESys. Considering the DESys-based one-step extraction improves the extraction efficiency and reduces the preparation time, the same idea can be used in IL for performance improvement. By formation of a new IL deep eutectic system based on hydrogen bond interaction in extraction, similar improvement was obtained.

Investigation of cellulose dissolution in morpholinium-based solvents: impact of solvent structural features on cellulose dissolution

A series of N-methylmorpholinium salts with varying N-alkyl chains and Cl-, OAc- and OH- as counter ions have been synthesized and investigated for their ability to dissolve cellulose, aiming at elucidating solvent structural features affecting cellulose dissolution. Synthesis procedures have been developed to, to a high extent, rely on conversions in water and microwave-assisted reactions employing a reduced number of work-up steps and ion-exchange resins that can be regenerated. Water solutions of morpholinium hydroxides proved capable of dissolving cellulose, with those of them possessing alkyl chains longer than ethyl showing surprising dissolution ability at room-temperature. Morpholinium acetates behaved as ionic liquids, and were also capable of dissolving cellulose when combined with DMSO. The obtained cellulose solutions were characterized according to their chemical and colloidal stability using 13C NMR spectroscopy, size exclusion chromatography and flow sweep measurements, while the ethanol coagulates were investigated in terms of crystallinity using solid state NMR. In contrast, the morpholinium chlorides obtained were hygroscopic with high melting points and low solubility in common organic solvents e.g., acetone, DMSO and DMAc, thus lacking the ability to swell or dissolve cellulose.

Oral insulin delivery: Barriers, strategies, and formulation approaches: A comprehensive review

Diabetes Mellitus is characterized by a hyperglycemic condition which can either be caused by the destruction of the beta cells or by the resistance developed against insulin in the cells. Insulin is a peptide hormone that regulates the metabolism of carbohydrates, proteins, and fats. Type 1 Diabetes Mellitus needs the use of Insulin for efficient management. However invasive methods of administration may lead to reduced adherence by the patients. Hence there is a need for a non-invasive method of administration. Oral Insulin has several merits over the conventional method including patient compliance, and reduced cost, and it also mimics endogenous insulin and hence reaches the liver by the portal vein at a higher concentration and thereby showing improved efficiency. However oral Insulin must pass through several barriers in the gastrointestinal tract. Some strategies that could be utilized to bypass these barriers include the use of permeation enhancers, absorption enhancers, use of suitable polymers, use of suitable carriers, and other agents. Several formulation types have been explored for the oral delivery of Insulin like hydrogels, capsules, tablets, and patches which have been described briefly by the article. A lot of attempts have been made for developing oral insulin delivery however none of them have been commercialized due to numerous shortcomings. Currently, there are several formulations from the companies that are still in the clinical phase, the success or failure of some is yet to be seen in the future.

Unconventional Electrochemical Behaviors of Cu Underpotential Deposition in a Chloride-Based Deep Eutectic Solvent: High Underpotential Shift and Low Coverage

The (5 × 5) Moiré pattern resulting from coadsorption of Cu atoms and chloride ions on the Au(111) electrode is one of the most classical structures for underpotential deposition (UPD) in electrochemical surface science. Although two models have been proposed to describe the pattern, the details of the structure remain ambiguous and controversial, leading to a question that remains to be answered. In this work, we investigate the UPD behaviors of Cu on the Au(111) electrode in a chloride-based deep eutectic solvent ethaline by in situ scanning tunneling microscopy (STM). Benefiting from the properties of the ultraconcentrated electrolyte, we directly image not only Cu but also Cl adlayers by finely tuning tunneling conditions. The structure is unambiguously determined for both Cu and Cl adlayers, where an incommensurate Cu layer is adsorbed on the Au(111) surface with a Cu coverage of 0.64, while the Cl coverage is 0.32 (only half of the expected value); i.e., the atomic arrangement of the observed (5 × 5) Moiré pattern in ethaline matches neither of the models proposed in the literature. Meanwhile, STM results confirm the origin of the cathodic peak in the cyclic voltammogram, which indicates that the underpotential shift of Cu UPD in ethaline indeed increases by ca. 0.40 V compared to its counterpart in a sulfuric acid solution, resulting in a significant deviation from the linear relation between the underpotential shift and the difference in work functions proposed in the literature. The unconventional electrochemical behaviors of Cu UPD reveal the specialty of both the bulk and the interface in the chloride-based deep eutectic solvent.

Retrospective insights into recent MXene-based catalysts for CO2 electro/photoreduction: how far have we gone?

The electro/photocatalytic CO₂ reduction reaction (CO₂RR) is a long-term avenue toward synthesizing renewable fuels and value-added chemicals, as well as addressing the global energy crisis and environmental challenges. As a result, current research studies have focused on investigating new materials and implementing numerous fabrication approaches to increase the catalytic performances of electro/photocatalysts toward the CO₂RR. MXenes, also known as 2D transition metal carbides, nitrides, and carbonitrides, are intriguing materials with outstanding traits. Since their discovery in 2011, there has been a flurry of interest in MXenes in electrocatalysis and photocatalysis, owing to their several benefits, including high mechanical strength, tunable structure, surface functionality, high specific surface area, and remarkable electrical conductivity. Herein, this review serves as a milestone for the most recent development of MXene-based catalysts for the electrocatalytic and photocatalytic CO₂RR. The overall structure of MXenes is described, followed by a summary of several synthesis pathways classified as top-down and bottom-up approaches, including HF-etching, in situ HF-formation, electrochemical etching, and halogen etching. Additionally, the state-of-the-art development in the field of both the electrocatalytic and photocatalytic CO₂RR is systematically reviewed. Surface termination modulation and heterostructure engineering of MXene-based electro/photocatalysts, and insights into the reaction mechanism for the comprehension of the structure-performance relationship from the CO₂RR via density functional theory (DFT) have been underlined toward activity enhancement. Finally, imperative issues together with future perspectives associated with MXene-based electro/photocatalysts are proposed.

Electropolishing of Aluminum at Room Temperature Using a Green DES of Choline Chloride and Propylene Glycol

For applications of aluminum where the smoothness or reflectivity of the aluminum matters, electropolishing is necessary to polish the aluminum surface sufficiently. This electropolishing is traditionally done with hazardous solutions in non-ideal conditions, such as low-temperature perchloric acid-ethanol mixtures. Here, we describe electropolishing of aluminum using a deep eutectic system composed of propylene glycol and choline chloride, with polishing accomplished at room temperature and using an inexpensive apparatus. This polishing was performed using both 99.5 and 99.99% pure aluminum, and scanning electron microscopy images show substantial improvement with both purities of aluminum. In addition, reflectivity measurements show significant improvement over sanding of aluminum. This method provides a simple, green method for electropolishing aluminum that can be used in any research where careful polishing of aluminum is necessary.

INSIGHTS INTO THERAPEUTIC LIQUID MIXTURES AND FORMULATIONS TOWARDS TUBERCULOSIS THERAPY

Therapeutic liquid mixtures, as deep eutectic systems, are considered a sustainable strategy that can be useful for the modification and enhancement of the pharmacokinetics and pharmacodynamics of different active ingredients. In this study, we assessed the stability and antibacterial activity of therapeutic liquid formulations prepared with anti-tuberculosis drugs. Tuberculosis therapy presents various pitfalls related, for example, to the administration of prolonged regimens of multiple drugs, different severe adverse effects, low compliance of the patient to treatment and the development of drug resistance. During this study, it was possible to assess the physicochemical stability of the formulations for 6 months, by polarized optical microscopy, ¹H-NMR and FTIR-ATR. Furthermore, the mixtures present an antibacterial effect against a drug-susceptible Mycobacterium tuberculosis strain (H37Rv). This was particularly evident for the mixtures with ethambutol incorporated, making them interesting to pursue with further studies and evaluation of clinical applicability. Upon infection, it was also observed that a single and higher dose appears to be more effective than lower separate doses, which could allow the production of patient-friendly formulations.

"Water-in-Deep Eutectic Solvent" Gel Electrolytes Synergistically Controlled by Solvation Regulation and Gelation Strategies for Flexible Electronic Devices

Recent developments in flexible electronics have heightened the need for electrolytes with high safety, ionic conductivity, and electrochemical stability. However, neither conventional organic electrolytes nor aqueous electrolytes can meet the above requirements simultaneously. Herein, a novel "water-in-deep eutectic solvent" gel (WIDG) electrolyte synergistically controlled by the solvation regulation and gelation strategies is reported. The water molecules introduced into deep eutectic solvent (DES) participate in the solvation structure regulation of Li⁺, thus endowing the WIDG electrolyte with high safety, thermal stability, and outstanding electrochemical performance, including high ionic conductivity (∼1.23 mS cm^-1) and a wide electrochemical window (∼5.4 V). Besides, the polymer in the gel interacts with DES and H₂O, further optimizing the electrolyte with excellent mechanical strength and higher operating voltage. Benefiting from these advantages, the lithium-ion capacitor constructed by WIDG electrolyte presents a high areal capacitance of 246 mF cm^-2 with an energy density of 87.3 μWh cm^-2. The use of the gel enhances the electrode structure stability, resulting in desirable cycling stability (>90% capacity retention after 1400 cycles). Moreover, the WIDG-assembled sensor exhibits high sensitivity and rapid real-time detection of motion. This work will provide guidelines for designing high-safety and high-operating-voltage electrolytes for flexible electronics.

The Role of Water Content of Deep Eutectic Solvent Ethaline in the Anodic Process of Gold Electrode

Traditional coupling of ligands for gold wet etching makes large-scale applications problematic. Deep eutectic solvents (DESs) are a new class of environment-friendly solvents, which could possibly overcome the shortcomings. In this work, the effect of water content on the Au anodic process in DES ethaline was investigated by combining linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Meanwhile, we employed atomic force microscopy (AFM) to image the evolution of the surface morphology of the Au electrode during its dissolution and passivation process. The obtained AFM data help to explain the observations about the effect of water content on the Au anodic process from the microscopic perspective. High water contents make the occurrence of anodic dissolution of gold at higher potential, but enhances the rate of the electron transfer and gold dissolution. AFM results reveal the occurrence of massive exfoliation, which confirms that the gold dissolution reaction is more violent in ethaline with higher water contents. In addition, AFM results illustrate that the passive film and its average roughness could be tailored by changing the water content of ethaline.

β-Diketone-Driven Deep Eutectic Solvent for Ultra-Efficient Natural Stable Lithium-7 Isotope Separation

6Li and 7Li are strategic resources. Because Li+ ions have no outermost electrons and the radii of 6Li and 7Li differ by only one neutron, the separation of the naturally stable isotopes of Li, especially by solvent extraction, is recognized as a difficult problem worldwide. Therefore, in this paper, an advanced β-diketone-driven deep eutectic solvent (DES) extraction system containing 2-thenoyltrifluoroacetone (HTTA) and tri-n-octyl phosphine oxide (TOPO) is introduced to the extraction and separation of 6Li+ and 7Li+ ions. Compared with those of reported HTTA extraction systems and crown ether extraction systems, the separation coefficient (β7Li/6Li) of the β-diketone-driven DES extraction system can reach the best value of 1.068, which is now the highest known β-value reported in the extraction system. From the intramolecular hydrogen bond of HTTA to the intermolecular hydrogen bond of DES, the bond energy increases by 47.8%. Because the active site of the proton in DES provides a higher energy barrier for the separation of 7Li, the β7Li/6Li is significantly increased. The extractions were characterized by spectrum, using 1H nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The mechanism was determined on the basis of the reaction kinetics and density functional theory (DFT). The DES extractant shows excellent cycle performance with regard to stripping and reusability. In conclusion, the highly efficient, economical, and stable β-diketone-driven DES extraction system can be used for the separation of naturally stable Li isotopes, which provides good industrial application prospects.

Insight into the Molecular Structure, Interaction, and Dynamics of Aqueous Reline Deep Eutectic Solvent: A Nuclear Magnetic Resonance Investigation

Reline, which is composed of choline chloride (ChCl) and urea, is the first and most widely used deep eutectic solvent (DES) described by Abbot and co-workers. Due to the hygroscopic feature, traces of water are unavoidable, which significantly affect the physicochemical properties of reline. At present, the local structure of molecules and the impact from the presence of water are still the most significant questions in this field. Herein, reline and six aqueous dilutions with a controlled amount of water (from 3.2 to 50.0 wt %) were studied mainly by using a combination of nuclear magnetic resonance (NMR) techniques. According to 1D ³⁵Cl NMR, 1D ¹⁵N NMR, and 2D ¹H-¹⁵Cl heteronuclear Overhauser effect spectroscopy, we probed the interactions of urea···Cl^- and Ch⁺···Cl^- in pure reline, which gradually dissociated in the presence of water. Moreover, it was revealed that the dissociation rate altered when the water content reached 9.0 wt %, which is ascribed to the higher preference of hydration for Cl^- ion compared to other species in the system. Furthermore, selected cross peaks in ¹H-¹H correlation spectroscopy spectra were analyzed. Accordingly, an enhanced correlation was observed for urea···Ch⁺ at a lower water fraction within 9.0 wt %. When the water content increased to 24.9 wt %, the water solvation of Ch⁺ and urea was also observed in COSY spectra. The interaction of H₂O···Ch⁺ got continuously stronger when the water content increased from 24.9 to 50.0 wt %, while H₂O···urea got enhanced when the water content reached 33.3 wt % and then diminished gradually from 33.3 to 50.0 wt %. ¹H-¹H nuclear Overhauser effect spectroscopy and ¹H-¹H rotating frame Overhauser effect spectroscopy experiments were also conducted for dynamics investigation. The τ_c value for the species in 9.0 wt % aqueous reline is very close to τ_c^crit of 0.44 ns. For pure reline and the aqueous reline with a water fraction of less than 9.0 wt %, the τ_c value of the species is longer than 0.44 ns, while for the sample with water of 24.9 wt %, the τ_c value is much shorter than 0.44 ns. Based on our NMR study, we revealed that with the water amount increasing from 0 to 50.0 wt %, the species involved in the system behaved as the large molecules or molecules in viscous liquids transiting to the medium-sized molecules in nonviscous liquids and finally to small molecules in nonviscous liquids.

A feasibility study on the use of hydrophobic eutectic solvents as pseudo-stationary phases in capillary electrophoresis for chiral separations

A critical challenge in using deep eutectic solvents (DESs) in capillary electrophoresis (CE) is to develop separation systems in which a DES can really work as a single entity. To achieve this, the authors recently demonstrated a novel strategy that takes advantage of the aqueous dispersibility of hydrophobic DESs (or more accurately hydrophobic eutectic solvents (HESs)). However, the previous work was limited only to the separation of achiral analytes, e.g., analogues, homologues, and isomers. The present study was designed as a follow-up study in order to explore the feasibility of employing HES-type pseudo-stationary phases (PSPs) in CE for chiral separations. By using carboxymethyl-β-cyclodextrin (CM-β-CD) as a model chiral selector, we provide the first evidence that there is a potential synergistic effect between HESs and traditional chiral selectors. Specifically, the combined use of HES (-)-menthol:octanoic acid and CM-β-CD allowed excellent enantioseparations of several basic drugs which were not able to be resolved in the single CM-β-CD system. The enantioresolutions were significantly improved while the migration times of the enantiomers were also shortened due to the hydrophobic mechanism of the HES-type PSP. Critical factors influencing the novel chiral CE system were systematically investigated. Since HESs are considered as "designer" solvents with highly tunable properties, this study demonstrates the potential of employing HESs (or HDES)-type PSPs in CE for chiral separations.

Zinc Electrode Cycling in Deep Eutectic Solvent Electrolytes: An Electrochemical Study

Among post-lithium ion battery technologies, rechargeable chemistries with Zn anodes bear notable technological promise owing to their high theoretical energy density, lower manufacturing cost, availability of raw materials and inherent safety. However, Zn anodes, when employed in aqueous electrolytes, suffer from hydrogen evolution, passivation, and shape changes. Alternative electrolytes can help tackle these issues, preserving the green and safe characteristics of aqueous-based ones. Deep eutectic solvents (DESs) are promising green and low-cost non-aqueous solvents for battery electrolytes. Specifically, the cycling of Zn anodes in DESs is expected to be reversible, chiefly owing to their dendrite-suppression capability. Nevertheless, apart from a few studies on Zn plating, insight into the cathodic-anodic electrochemistry of Zn in DESs is still very limited. In view of developing DES-based battery electrolytes, it is crucial to consider that a potential drawback might be their low ionic conductivity. Water molecules can be added to the eutectic mixtures by up to 40% to increase the diffusion coefficient of the electroactive species and lower the electrolyte viscosity without destroying the eutectic nature. In this study, we address the electrochemistry of Zn in two different hydrated DESs (ChU and ChEG with ~30% H₂O). Fundamental electrokinetic and electrocrystallization studies based on cyclic voltammetry and chronoamperometry at different cathodic substrates are completed with a galvanostatic cycling test of Zn|Zn symmetric CR2032 coin cells, SEM imaging of electrodes and in situ SERS spectroscopy. This investigation concludes with the proposal of a specific DES/H₂O/ZnSO₄-based electrolyte that exhibits optimal functional performance, rationalized on the basis of fundamental electrochemical data, morphology evaluation and modeling of the cycling response.

Dependence of 1H-NMR T 1 relaxation time of trimethylglycine betaine deep eutectic solvents on the molar composition and on the presence of water

¹H-NMR spin lattice relaxation times (T ₁), measured by inversion recovery technique, allowed to establish the stoichiometric coefficient (ratio between the H-bond acceptor and H-bond donor) of a series of trimethylglycine betaine/diol based deep eutectic solvents (DESs); ethylene glycol, triethylene glycol and 1,3-propandiol were selected as H-bond donors. The maximum amount of water tolerated by the DES, before its complete hydration, was determined as well. Finally, the method was validated comparing the eutectic composition of the betaine/glycol system with that determined by means of differential scanning calorimetry analysis; the stoichiometric coefficients were identical.

Preparation and physicochemical characterization of deep eutectic solvents and ionic liquids for the potential absorption and biodegradation of styrene vapors

Styrene emissions can be treated by physicochemical, biological, or physicochemical/biological means. Due to its low solubility in water an alternative to eliminate styrene emissions from air is the use of two-phase partitioning bioreactors (TPPBs) which comprised a hydrophobic non-aqueous phase (NAP) which can improve mass transfer of styrene. This study was devoted to prepare and evaluate the main physicochemical characteristics of novel NAPs such as Ionic liquids (ILs), Deep Eutectic Solvents (DESs) and Natural Deep Eutectic Solvents (NADEs) as well as their toxicity and biodegradability to treat styrene vapors. Absorption experiments of styrene showed that the best NAPs were the DESs formed with Tetrabutylammonium bromide and decanoic acid and the ILs [C₆mim][FAP], [C₄mim] [NTf₂] and [C₄mim] [PF₆], since they presented a styrene partition coefficient between 0.0015 and 0.0041. Finally, the IL [C₆mim][FAP] was used as a NAP in a TPPB batch process given its high styrene affinity, low solubility in water and non-biodegradability; styrene mineralization was three times higher in the TPPB compared with the control. ILs are potential adjuvant phases in biological degradation systems, as well as other solvents like DESs and NADESs.