Heat-activated growth of metastable and length-defined DNA fibers expands traditional polymer assembly

Biopolymers such as nucleic acids and proteins exhibit dynamic backbone folding, wherein site-specific intramolecular interactions determine overall structure. Proteins then hierarchically assemble into supramolecular polymers such as microtubules, that are robust yet dynamic, constantly growing or shortening to adjust to cellular needs. The combination of dynamic, energy-driven folding and growth with structural stiffness and length control is difficult to achieve in synthetic polymer self-assembly. Here we show that highly charged, monodisperse DNA-oligomers assemble via seeded growth into length-controlled supramolecular fibers during heating; when the temperature is lowered, these metastable fibers slowly disassemble. Furthermore, the specific molecular structures of oligomers that promote fiber formation contradict the typical theory of block copolymer self-assembly. Efficient curling and packing of the oligomers - or 'curlamers' - determine morphology, rather than hydrophobic to hydrophilic ratio. Addition of a small molecule stabilises the DNA fibers, enabling temporal control of polymer lifetime and underscoring their potential use in nucleic-acid delivery, stimuli-responsive biomaterials, and soft robotics.

Sculpting photoproducts with DNA origami

Natural light-harvesting systems spatially organize densely packed dyes in different configurations to either transport excitons or convert them into charge photoproducts, with high efficiency. In contrast, artificial photosystems like organic solar cells and light-emitting diodes lack this fine structural control, limiting their efficiency. Thus, biomimetic multi-dye systems are needed to organize dyes with the sub-nanometer spatial control required to sculpt resulting photoproducts. Here, we synthesize 11 distinct perylene diimide (PDI) dimers integrated into DNA origami nanostructures and identify dimer architectures that offer discrete control over exciton transport versus charge separation. The large structural-space and site-tunability of origami uniquely provides controlled PDI dimer packing to form distinct excimer photoproducts, which are sensitive to interdye configurations. In the future, this platform enables large-scale programmed assembly of dyes mimicking natural systems to sculpt distinct photophysical products needed for a broad range of optoelectronic devices, including solar energy converters and quantum information processors.

Exchanging and Releasing Information in Synthetic Digital Polymers Using a Strand-Displacement Strategy

Toehold-mediated strand displacement (TMSD) was tested as a tool to edit information in synthetic digital polymers. Uniform DNA-polymer biohybrid macromolecules were first synthesized by automated phosphoramidite chemistry and characterized by HPLC, mass spectrometry, and polyacrylamide gel electrophoresis (PAGE). These precursors were diblock structures containing a synthetic poly(phosphodiester) (PPDE) segment covalently attached to a single-stranded DNA sequence. Three types of biohybrids were prepared herein: a substrate containing an accessible toehold as well as input and output macromolecules. The substrate and the input macromolecules contained noncoded PPDE homopolymers, whereas the output macromolecule contained a digitally encoded segment. After hybridization of the substrate with the output, incubation in the presence of the input led to efficient TMSD and the release of the digital segment. TMSD can therefore be used to erase or rewrite information in self-assembled biohybrid superstructures. Furthermore, it was found in this work that the conjugation of DNA single strands to synthetic segments of chosen lengths greatly facilitates the characterization and PAGE visualization of the TMSD process.

Precision Sequence-Defined Polymers: From Sequencing to Biological Functions

Precise sequence-defined polymers (SDPs) with uniform chain-to-chain structure including chain length, unit sequence, and end functionalities represent the pinnacle of sophistication in the realm of polymer science. For example, the absolute control over the unit sequence of SDPs allows for the bottom-up design of polymers with hierarchical microstructures and functions. Accompanied with the development of synthetic techniques towards precision SDPs, the decoding of SDP sequences and construction of advanced functions irreplaceable by other synthetic materials is of central importance. In this Minireview, we focus on recent advances in SDP sequencing techniques including tandem mass spectrometry (MS), chemically assisted primary MS, as well as other non-destructive sequencing methods such as nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD), and nanopore sequencing. Additionally, we delve into the promising prospects of SDP functions in the area of cutting-edge biological research. Topics of exploration include gene delivery systems, the development of hybrid materials combining SDPs and nucleic acids, protein recognition and regulation, as well as the interplay between chirality and biological functions. A brief outlook towards the future directions of SDPs is also presented.

Conception and Evaluation of a Library of Cleavable Mass Tags for Digital Polymers Sequencing

A library of phosphoramidite monomers containing a main-chain cleavable alkoxyamine and a side-chain substituent of variable molar mass (i.e. mass tag) was prepared in this work. These monomers can be used in automated solid-phase phosphoramidite chemistry and therefore incorporated periodically as spacers inside digitally-encoded poly(phosphodiester) chains. Consequently, the formed polymers contain tagged cleavable sites that guide their fragmentation in mass spectrometry sequencing and enhance their digital readability. The spacers were all prepared via a seven steps synthetic procedure. They were afterwards tested for the synthesis and sequencing of model digital polymers. Uniform digitally-encoded polymers were obtained as major species in all cases, even though some minor defects were sometimes detected. Furthermore, the polymers were decoded in pseudo-MS3 conditions, thus confirming the reliability and versatility of the spacers library.

Supramolecular assembly of pyrene-DNA conjugates: influence of pyrene substitution pattern and implications for artificial LHCs

The supramolecular self-assembly of pyrene-DNA conjugates into nanostructures is presented. DNA functionalized with different types of pyrene isomers at the 3'-end self-assemble into nano-objects. The shape of the nanostructures is influenced by the type of pyrene isomer appended to the DNA. Multilamellar vesicles are observed with the 1,6- and 1,8-isomers, whereas conjugates of the 2,7-isomer exclusively assemble into spherical nanoparticles. Self-assembled nano-spheres obtained with the 2,7-dialkynyl pyrene isomer were used for the construction of an artificial light-harvesting complex (LHC) in combination with Cy3 as the energy acceptor.

Two-Dimensional Supramolecular Polymerization of DNA Amphiphiles is Driven by Sequence-Dependent DNA-Chromophore Interactions

Two-dimensional (2D) assemblies of water-soluble block copolymers have been limited by a dearth of systematic studies that relate polymer structure to pathway mechanism and supramolecular morphology. Here, we employ sequence-defined triblock DNA amphiphiles for the supramolecular polymerization of free-standing DNA nanosheets in water. Our systematic modulation of amphiphile sequence shows the alkyl chain core forming a cell membrane-like structure and the distal π-stacking chromophore block folding back to interact with the hydrophilic DNA block on the nanosheet surface. This interaction is crucial to sheet formation, marked by a chiral "signature", and sensitive to DNA sequence, where nanosheets form with a mixed sequence, but not with a homogeneous poly(thymine) sequence. This work opens the possibility of forming well-ordered, bilayer-like assemblies using a single DNA amphiphile for applications in cell sensing, nucleic acid therapeutic delivery and enzyme arrays.

Stabilization of DNA Duplexes and Hairpins by Charge-Transfer Interactions Using DAN:NDI Pairs

Electron-rich 1,5-dialkoxynaphthalene (DAN) and electron-deficient 1,8,4,5-naphthalenetetracarboxylic diimide (NDI) are known to interact through the formation of charge-transfer complexes. The introduction of DAN and NDI into various DNA duplexes and hairpins was investigated by ultraviolet (UV) melting curve analysis. The positioning of the DAN:NDI pair was found to strongly influence the stability of DNA duplex and hairpins. In particular, while the introduction of one DAN/NDI pair in front of each other in the center of a DNA duplex led to a decrease of the thermal stability (ΔTm - 6 °C), the addition of a second pair restored or even increased the stability. In contrast, the introduction of DAN:NDI pairs at the end of a duplex always induced a strong stabilization (ΔTm up to +20 °C). Finally, a DAN:NDI pair positioned in the loop of a hairpin induced a stronger stabilization than a T4 loop (ΔTm + 10 °C). Based on charge-transfer interactions, the strong stabilizations observed allow the preparation of highly stabilized DNA nanostructures opening the way to numerous applications in nanotechnology.

Supramolecular Recognition of Phosphodiester-Based Donor and Acceptor Oligomers Forming Gels in Water

Inspired by automated DNA synthesis, electron-rich dialkoxynaphthalene (DAN) donor and electron-deficient naphthalene-tetracarboxylic diimide (NDI) acceptor phosphodiester-linked homohexamers were synthesized by the phosphoramidite method. Two types of hexamers were prepared, one with only one phosphodiester between the aromatics (i.e., DAN or NDI) and a second with two phosphodiesters around a propanediol between the aromatics, leading to the latter more flexible and more hydrophilic hexamers. The folding properties of these homohexamers alone or mixed together, in water only, were studied by UV-visible absorption spectroscopy and atomic force microscopy (AFM). AFM imaging revealed that a 1:1 mixture of hexaDAN and hexaNDI formed fibers by charge transfer donor-acceptor recognition leading to a hydrogel after drying. The organization of the resulting structures is strongly dependent on the nature of the complementary partner, leading to the formation of mono- or multilayer hydrogel networks with different compactness.

Design, Synthesis and Actual Applications of the Polymers Containing Acidic P-OH Fragments: Part 1. Polyphosphodiesters

Among natural and synthetic polymers, main-chain phosphorus-containing polyacids (PCPAs) (polyphosphodiesters), stand in a unique position at the intersection of chemistry, physics, biology and medicine. The structural similarity of polyphosphodiesters PCPAs to natural nucleic and teichoic acids, their biocompatibility, mimicking to biomolecules providing the 'stealth effect', high bone mineral affinity of polyphosphodiesters resulting in biomineralization at physiological conditions, and adjustable hydrolytic stability of polyphosphodiesters are the basis for various biomedical, industrial and household applications of this type of polymers. In the present review, we discuss the synthesis, properties and actual applications of polyphosphodiesters.

Tetraphenylethylene-DNA conjugates: influence of sticky ends and DNA sequence length on the supramolecular assembly of AIE-active vesicles

The supramolecular assembly of DNA conjugates, functionalized with tetraphenylethylene (TPE) sticky ends, into vesicular structures is described. The aggregation-induced emission (AIE) active TPE units allow monitoring the assembly process by fluorescence spectroscopy. The number of TPE modifications in the overhangs of the conjugates influences the supramolecular assembly behavior. A minimum of two TPE residues on each end are required to ensure a well-defined assembly process. The design of the presented DNA-based nanostructures offers tailored functionalization with applications in DNA nanotechnology.

The supramolecular assembly of tetraphenylethylene (TPE)–DNA conjugates is presented. The length of the TPE sticky ends exerts a pronounced effect on the formation of aggregation-induced emission (AIE)-active vesicles.

Complex DNA Architectonics─Self-Assembly of Amphiphilic Oligonucleotides into Ribbons, Vesicles, and Asterosomes

The precise arrangement of structural subunits is a key factor for the proper shape and function of natural and artificial supramolecular assemblies. In DNA nanotechnology, the geometrically well-defined double-stranded DNA scaffold serves as an element of spatial control for the precise arrangement of functional groups. Here, we describe the supramolecular assembly of chemically modified DNA hybrids into diverse types of architectures. An amphiphilic DNA duplex serves as the sole structural building element of the nanosized supramolecular structures. The morphology of the assemblies is governed by a single subunit of the building block. The chemical nature of this subunit, i.e., polyethylene glycols of different chain length or a carbohydrate moiety, exerts a dramatic influence on the architecture of the assemblies. Cryo-electron microscopy revealed the arrangement of the individual DNA duplexes within the different constructs. Thus, the morphology changes from vesicles to ribbons with increasing length of a linear polyethylene glycol. Astoundingly, attachment of a N-acetylgalactosamine carbohydrate to the DNA duplex moiety produces an unprecedented type of star-shaped architecture. The novel DNA architectures presented herein imply an extension of the current concept of DNA materials and shed new light on the fast-growing field of DNA nanotechnology.

Tuning Exciton Coupling of Merocyanine Nucleoside Dimers by RNA, DNA and GNA Double Helix Conformations

Exciton coupling between two or more chromophores in a specific environment is a key mechanism associated with color tuning and modulation of absorption energies. This concept is well exemplified by natural photosynthetic proteins, and can also be achieved in synthetic nucleic acid nanostructures. Here we report the coupling of barbituric acid merocyanine (BAM) nucleoside analogues and show that exciton coupling can be tuned by the double helix conformation. BAM is a nucleobase mimic that was incorporated in the phosphodiester backbone of RNA, DNA and GNA oligonucleotides. Duplexes with different backbone constitutions and geometries afforded different mutual dye arrangements, leading to distinct optical signatures due to competing modes of chromophore organization via electrostatic, dipolar, π-π-stacking and hydrogen-bonding interactions. The realized supramolecular motifs include hydrogen-bonded BAM-adenine base pairs and antiparallel as well as rotationally stacked BAM dimer aggregates with distinct absorption, CD and fluorescence properties.

Building Blocks of the Protective Suberin Plant Polymer Self-Assemble into Lamellar Structures with Antibacterial Potential

The protection of terrestrial plants from desiccation, mechanical injury, and pathogenic invasion is achieved by waxes and cutin polyesters on leaf and fruit surfaces as well as suberin polymers that are embedded in the cell walls of roots, but the physicochemical principles governing the organization of these biological composites remain incompletely understood. Despite the well-established enzymatic mediation of suberin formation in the skins of potato tubers, cork oak trees, and internal plant tissues, the additional possibility of self-assembly in this system was suggested by our serendipitous finding that solvent extracts from potato phellem tissues form suspended fibers and needles in the absence of such catalysts over a period of several weeks. In the current study, we investigated self-assembly for three-component model chemical mixtures comprised of a hydroxyfatty acid, glycerol, and either of two hydroxycinnamic acids that together typify the building blocks of potato suberin biopolymers. We demonstrate that these mixtures spontaneously form lamellar structures that are reminiscent of suberized plant tissues, incorporate all constituents into self-assemblies, can form covalently bound ester structures, and display antibacterial activity. These findings provide new perspectives on the self-association and reactivity of these classes of organic compounds, insights into agriculturally important suberin formation in food crops, and a starting point for engineering sustainable materials with antimicrobial capabilities.

Sequence-complementarity dependent co-assembly of phosphodiester-linked aromatic donor–acceptor trimers

Sequence-defined trimers of phosphodiester-linked aromatic donor–acceptors self-assemble according to monomer order, and co-assemble into new structures with their complementary sequence.

Probing the adsorption behavior and free energy landscape of single-stranded DNA oligonucleotides on single-layer MoS2with molecular dynamics

Interfacing single-stranded DNA (ssDNA) with 2D transition metal dichalcogenides are important for numerous technological advancements. However, the molecular mechanism of this process, including the nature of intermolecular association and conformational details of the self-assembled hybrids is still not well understood. Here, atomistic molecular dynamics simulation is employed to study the distinct adsorption behavior of ssDNA on a single-layer MoS₂in aqueous environment. The ssDNA sequences [T₁₀, G₁₀, A₁₀, C₁₀, U₁₀, (GT)₅, and (AC)₅] are chosen on the basis that short ssDNA segments can undergo a spontaneous conformational change upon adsorption and allow efficient sampling of the conformational landscape. Differences in hybridization is attributed to the inherent molecular recognition ability of the bases. While the binding appears to be primarily driven by energetically favorable van der Waalsπ-stacking interactions, equilibrium structures are modulated by the ssDNA conformational changes. The poly-purines demonstrate two concurrently competingπ-stacking interactions: nucleobase-nucleobase (intramolecular) and nucleobase-MoS₂(intermolecular). The poly-pyrimidines, on the other hand, reveal enhancedπ-stacking interactions, thereby maximizing the number of contacts. The results provide new molecular-level understanding of ssDNA adsorption on the MoS₂surface and facilitate future studies in design of functional DNA/MoS₂structure-based platforms for DNA sequencing, biosensing (optical, electrochemical, and electronic), and drug delivery.

Stimuli-Responsive Supramolecular Polymers from Amphiphilic Phosphodiester-Linked Azobenzene Trimers

An amphiphilic phosphodiester-linked azobenzene trimer has been exploited in the development of stimuli-responsive, water-soluble supramolecular polymers. The trimer can reversibly undergo thermal and photoisomerization between Z- and E-isomers. Its self-assembly properties in aqueous medium have been investigated by spectroscopic and microscopic techniques, demonstrating that E- and Z-azobenzene trimers form supramolecular nanosheets and toroidal nanostructures, respectively. By virtue of the E/Z photoisomerization of the azobenzene units, the two different supramolecular morphologies can be switched by photoirradiation. The findings pave a way towards stimuli-responsive, water-soluble supramolecular polymers which hold great promise in the development of smart functional materials.

Double-headed nucleic acids condense the molecular information of DNA to half the number of nucleotides

Nucleotide monomers that hold two nucleobases each, i.e. double-headed nucleotides, have been shown to form two sets of functional Watson-Crick base pairs when incorporated into dsDNA, and they hereby behave as dinucleotides. To form the basis for fully modified double-headed nucleic acids (DhNA), we have prepared three new DhNA monomers and can now demonstrate that the molecular information of 10 Watson-Crick base pairs can be condensed to highly stable 5-mer DhNA duplexes.

Layered assembly of cationic and anionic supramolecular polymers

The chemical synthesis and the supramolecular assembly of an aromatic oligoamine are described. The self-assembly of the cationic oligomers in aqueous solution leads to the formation of vesicular objects. The assembly process of the oligomers is monitored by absorption and fluorescence spectroscopy and the formed vesicles are characterized by atomic force and transmission electron microscopy. The electrostatic complementarity of anionic supramolecular polymers sheets and the cationic vesicles is used for a layered assembly process.

Stacked Thiazole Orange Dyes in DNA Capable of Switching Emissive Behavior in Response to Structural Transitions

Functional nucleic acids with the capability of generating fluorescence in response to hybridization events, microenvironment or structural changes are valuable as structural probes and chemical sensors. We now demonstrate the enzyme-assisted preparation of nucleic acids possessing multiple thiazole orange (TO) dyes and their fluorescent behavior, that show a spectral change from the typical monomer emission to the excimer-type red-shifted emission. We found that the fluorescent response and emission wavelength of the TO dyes were dependent on both the state of the DNA structure (single- or double-stranded DNA) and the arrangement of the TO dyes. We showed that the fluorescent behavior of the TO dyes can be applied for the detection of RNA molecules, suggesting that our approach for preparing the fluorescent nucleic acids functionalized with multiple TO dyes could be useful to design a fluorescence bioimaging and detection technique of biomolecules.

Tailoring the growth and proliferation of human dermal fibroblasts by DNA-based polymer films for skin regeneration

The use of DNA as a functional biomaterial for therapeutic, diagnostic, and drug delivery applications has been prominent in recent years, but its use as a scaffold for tissue regeneration is still limited. This study aimed to evaluate the biocompatibility and interaction of DNA-based polymeric films (DNA-PFs) with primary human fibroblasts (PHF) for regenerative medicine and wound healing purposes. The morphological characterization of the films was performed by scanning electron microscopy, SEM-energy-dispersive X-ray spectroscopy, and atomic force microscopy analysis. Cell viability, cell cycle kinetics, oxidative stress, and migration studies were carried out at 48 and 72 hr of incubation and compared to control cells. Cell adhesion was impaired in the first 24 hr, DNA-PFs with higher concentrations of DNA (1.0 and 2.0 g/L) this effect was not seen in DNA-PFs (0.5 g/L), explained by the difference in topography and roughness of DNA-PFs, but it was overcome after 48 hr of incubation. PHF seeded on DNA films showed higher proliferation and migration rates than the control after 48 hr of incubation, with the maintenance of cell morphology and lower cytotoxicity and oxidative stress during the evaluation time. Therefore, these results indicate that DNA-PFs are highly biocompatible and provide a suitable microenvironment for dermal fibroblasts to maintain their activity, helping build new and more complex biomaterials suitable for future tissue repair applications.

Precisely Defined Aptamer-b-Poly(phosphodiester) Conjugates Prepared by Phosphoramidite Polymer Chemistry

Uniform conjugates combining a DNA aptamer (either anti-MUC1 or ATP aptamer) and a synthetic polymer segment were synthesized by automated phosphoramidite chemistry. This multistep growth polymer chemistry enables the use of both natural (i.e., nucleoside phosphoramidites) and non-natural monomers (e.g., alkyl- and oligo(ethylene glycol)-phosphoramidites). Thus, in the present work, six different aptamer-polymer conjugates were synthesized and characterized by ion-exchange HPLC, circular dichroism spectroscopy, and electrospray mass spectrometry. All these methods evidenced the formation of uniform molecules with precisely controlled chain-length and monomer sequences. Furthermore, aptamer folding was not affected by polymer bioconjugation. The method described herein is straightforward and allows covalent attachment of homopolymers and copolymers to biofunctional DNA aptamers.

The Sequence of a Step-Growth Copolymer Can Be Influenced by Its Own Persistence Length

Synthetic copolymer sequences remain challenging to control, and there are features of even simple one-pot, solution-based copolymerizations that are not yet fully understood. In previous simulations on step-growth copolymerizations in solution, we demonstrated that modest variations in the attractions between type A and B monomers could significantly influence copolymer sequence through an emergent aggregation and phase separation initiated by the lengthening of nascent oligomers. Here we investigate how one aspect of a copolymer's geometry-its flexibility-can modulate those effects. Our simulations show the onset of strand alignment within the polymerization-induced aggregates as chain stiffness increases and demonstrate that this alignment can influence the resulting copolymer sequences. For less flexible copolymers, with persistence lengths ≥10 monomers, modest nonbonded attractions of ∼k_BT between monomers of the same type yield A and B blocks of a characteristic length and result in a polydispersity index that grows rapidly, peaks, and then diminishes as the reaction proceeds. These results demonstrate that for copolymer systems with modest variations in intermonomer attractions and physically realistic flexibilities a nascent copolymer's persistence length can influence its own sequence.

Design of Abiological Digital Poly(phosphodiester)s

In biological systems, the storage and transfer of genetic information rely on sequence-controlled nucleic acids such as DNA and RNA. It has been realized for quite some time that this property is not only crucial for life but could also be very useful in human applications. For instance, DNA has been actively investigated as a digital storage medium over the past decade. Indeed, the "hard-disk of life" is an obvious choice and a highly optimized material for storing data. Through decades of nucleic acids research, technological tools for parallel synthesis and sequencing of DNA have been readily available. Consequently, it has already been demonstrated that different types of documents (e.g., texts, images, videos, and industrial data) can be stored in chemically synthesized DNA libraries. However, DNA is subject to biological constraints, and its molecular structure cannot be easily varied to match technological needs. In fact, DNA is not the only macromolecule that enables data storage. In recent years, it has been demonstrated that a wide variety of synthetic polymers can also be used for such a purpose. Indeed, modern polymer synthesis allows the preparation of synthetic macromolecules with precisely controlled monomer sequences. Altogether, about a dozens of synthetic digital polymers have already been described, and many more can be foreseen. Among them, sequence-defined poly(phosphodiester)s are one of the most promising options. These polymers are prepared by stepwise phosphoramidite chemistry like chemically synthesized oligonucleotides. However, they are constructed with non-natural building blocks and therefore share almost no structural characteristics with nucleic acids, except phosphate repeat units. Still, they contain readable digital messages that can be deciphered by nanopore sequencing or mass spectrometry sequencing. In this Account, we describe our recent research efforts in synthesizing and sequencing optimal abiological digital poly(phosphodiester)s. A major advantage of these polymers over DNA is that their molecular structure can easily be varied to tune their properties. During the last 5 years, we have engineered the molecular structure of these polymers to adjust crucial parameters such as the storage density, storage capacity, erasability, and readability. Consequently, high-capacity PPDE chains, containing hundreds of bits per chains, can now be synthesized and efficiently sequenced using a routine mass spectrometer. Furthermore, sequencing data can be automatically decrypted with the help of decoding software. This new type of coded matter can also be edited using practical physical triggers such as light and organized in space by programmed self-assembly. All of these recent improvements are summarized and discussed herein.

Assembly of Dynamic Supramolecular Polymers on a DNA Origami Platform

Biological processes rely on transient interactions that govern assembly of biomolecules into higher order, multi-component systems. A synthetic platform for the dynamic assembly of multicomponent complexes would provide novel entries to study and modulate the assembly of artificial systems into higher order topologies. Here, we establish a hybrid DNA origami-based approach as an assembly platform that enables dynamic templating of supramolecular architectures. It entails the site-selective recruitment of supramolecular polymers to the platform with preservation of the intrinsic dynamics and reversibility of the assembly process. The composition of the supramolecular assembly on the platform can be tuned dynamically, allowing for monomer rearrangement and inclusion of molecular cargo. This work should aid the study of supramolecular structures in their native environment in real-time and incites new strategies for controlled multicomponent self-assembly of synthetic building blocks.

Chain Entropy Beats Hydrogen Bonds to Unfold and Thread Dialcohol Phosphates inside Cyanostar Macrocycles To Form [3]Pseudorotaxanes

The recognition of substituted phosphates underpins many processes including DNA binding, enantioselective catalysis, and recently template-directed rotaxane synthesis. Beyond ATP and a few commercial substrates, however, little is known about how substituents effect organophosphate recognition. Here, we examined alcohol substituents and their impact on recognition by cyanostar macrocycles. The organophosphates were disubstituted by alcohols of various chain lengths, dipropanol, dihexanol, and didecanol phosphate, each accessed using modular solid-phases syntheses. Based on the known size-selective binding of phosphates by π-stacked dimers of cyanostars, threaded [3]pseudorotaxanes were anticipated. While seen with butyl substituents, pseudorotaxane formation was disrupted by competitive OH···O- hydrogen bonding between both terminal hydroxyls and the anionic phosphate unit. Crystallography also showed formation of a backfolded propanol conformation resulting in an 8-membered ring and a perched cyanostar assembly. Motivated by established entropic penalties accompanying ring formation, we reinstated [3]pseudorotaxanes by extending the size of the substituent to hexanol and decanol. Chain entropy overcomes the enthalpically favored OH···O- contacts to favor random-coil conformations required for seamless, high-fidelity threading of dihexanol and didecanol phosphates inside cyanostars. These studies highlight how chain length and functional groups on phosphate's substituents can be powerful design tools to regulate binding and control assembly formation during phosphate recognition.

DNA building blocks for AFM tip functionalization: An easy, fast and stable strategy

Biosensing atomic force microscopy (AFM) offers the unique feature to determine the energy landscape of a bimolecular interaction at the real single molecule level. Furthermore, simultaneous and label-free mapping of molecular recognition and the determination of sample topography at the nanoscale gets possible. A prerequisite and one of the major parts in biosensing AFM are the bio-functionalized AFM tips. In the past decades, different approaches for tip functionalization have been developed. Using these functionalization strategies, several biological highly relevant interactions at the single molecule level have been explored. For the most common approach, the use of a heterobifunctional poly(ethylenglycol) crosslinker, a broad range of linkers for different chemical coupling strategies is available. Nonetheless, the time consuming functionalization protocol as well as the broad distribution of rupture length reduces the possibility of automation and may reduce the accuracy of the results. Here we present a stable and fast forward approach based on tetra-functional DNA tetrahedra. A fast functionalization and a sharp defined distribution of rupture length gets possible with low effort and high success rate. We tested the performance on the classical avidin biotin system by using tetrahedra with three disulfide legs for stable and site directed coupling to gold coated tips and a biotinylated end at the fourth vertex. A special advantage appears when working with a DNA aptamer as sensing molecule. In this case, the fourth strand can be extended by a certain DNA sequence complementary to the linkage part of an aptamer. This AFM tip functionalization protocol was applied on thrombin using DNA aptamers directed against the fibrinogen binding side of human thrombin.

Molecular Chromophore-DNA Architectures With Fullerenes: Optical Properties and Solar Cells

Supramolecular chemistry allows the construction of complex molecular architectures and the design of collective photophysical properties. DNA is an attractive template to build such supramolecular architectures due to its helical structure, the defined distances between the bases and the canonical base pairing that results in precise control of the chromophore position. The tailored properties of DNA-templated supramolecules eventually allow their implementation into optoelectronic applications. For the generation of free charge carriers from photo-generated excitons, fullerenes can be utilized. We synthesized two fullerene derivates, one of which binds by electrostatic interactions to single-stranded DNA, while the other contains two 2'-deoxyuridine moieties and assembles specifically along oligo-2'-deoxyadenosines (dA20) as DNA template. The DNA-directed assembly of both fullerenes in aqueous solution was investigated by UV/Vis absorbance and circular dichroism (CD) spectroscopy. The specific interactions with DNA make fullerenes with the 2'-deoxyuridine moieties a significantly better component for supramolecular DNA architectures. We studied the fluorescence quenching of both fullerenes with a DNA chromophore assembly. To investigate one of the key properties for optoelectronic applications, that is the supramolecular structure of the DNA-based assemblies in the solid phase, we characterized the CD of supramolecular chromophore-DNA architectures in thin films. Remarkably, the helical chirality of the chromophore assemblies that is induced by the DNA template is conserved even in the solid state. Upon implementation into organic solar cells, the external quantum efficiency measurements showed charge carrier generation on all three chromophore components of the DNA assemblies. The fullerenes with the 2'-deoxyuridine moieties enhance the quantum efficiency of the conversion process significantly, demonstrating the potential of DNA as structural element for ordering chromophores into functional π-systems, which may be employed in future organic solar cells.

Synthesis and sequencing of informational poly(amino phosphodiester)s

The inclusion of main-chain tertiary amines in digital poly(phosphodiester)s allows synthesis of molecularly-defined achiral polymers and simplifies tandem mass spectrometry sequencing.

Combination of DNA with polymers

The preparation and applications of DNA containing polymers are comprehensively reviewed, and they are in the form of DNA−polymer covalent conjugators, supramolecular assemblies and hydrogels for advanced materials with promising features.

Folding of phosphodiester-linked donor–acceptor oligomers into supramolecular nanotubes in water

Water soluble foldamers, synthesized by DNA synthesis with dialkoxynaphthalene and naphthalene-tetracarboxylic diimide blocks, formed supramolecular nanotubes in water.

Chemical conjugation of nucleic acid aptamers and synthetic polymers

This minireview describes the synthesis, characterization and properties of aptamer–polymer conjugates. This new class of polymer bioconjugates combines the advantages of synthetic polymers and folded nucleic acids.

Assembly and functionalization of supramolecular polymers from DNA-conjugated squaraine oligomers

DNA conjugated oligomers of organic molecules are candidates for applications in the materials and medical sciences, in diagnostics, in optical devices, for delivery or for the design of complex molecular architectures. Herein, we describe the synthesis and properties of DNA-conjugated squaraine (Sq) oligomers. The oligomers self-assemble into supramolecular polymers that are amenable to further functionalization via DNA hybridization, as shown by the attachment of gold nanoparticles (AuNPs).

The assembly of supramolecular polymers of DNA-linked squaraine oligomers and their subsequent derivatization is described.

Nonlinear hybridization chain reaction-based functional DNA nanostructure assembly for biosensing, bioimaging applications

Hybridization chain reaction (HCR) can be divided into two categories: linear HCR and nonlinear HCR. In traditional linear HCR, the relatively slow kinetics and less sufficient sensitivity largely limit its scope of application. In the nonlinear HCR system, under the trigger of the initiator, the judicious designed substrate sequences (hairpin or hairpin-free) will self-assembly to dendritic or branched DNA nanostructures with exponential growth kinetics. Given the advantages of its enzyme-free, high-order growth kinetic, high sensitivity, and simple operation, nonlinear HCR is regarded as a powerful signal amplifier for the detection of biomarkers by integrating with versatile sensing platforms in the past few decades. In this review, we describe the basic features of nonlinear HCR mechanism and classify the nonlinear HCR into several categories based on their self-assembly mechanisms: the branched HCR, dendritic HCR, hydrogel-based clamped HCR, and other types of HCR. Then, we summarize the recent development of nonlinear HCR in biosensing, such as nucleic acid, protein, enzyme activities, and cancer cell detection, etc., and we also review the current applications of nonlinear HCR in bioimaging (mRNA in situ imaging). We choose several representative works to further illustrate the analysis mechanisms via various detection platforms, such as fluorescence, electrochemical, colorimetric, etc. At last, we also review the challenges and further perspectives of nonlinear HCR in the use of bioanalysis.

Supramolecular assembly of DNA-constructed vesicles

The self-assembly of DNA hybrids possessing tetraphenylethylene sticky ends at both sides into vesicular architectures in aqueous medium is demonstrated. Cryo-electron microscopy reveals the formation of different types of morphologies from the amphiphilic DNA-hybrids. Depending on the conditions, either an extended (sheet-like) or a compact (columnar) alignment of the DNA hybrids is observed. The different modes of DNA arrangement lead to the formation of vesicles appearing either as prolate ellipsoids (type I) or as spheres (type II). The type of packing has a significant effect on the accessibility of the DNA, as evidenced by intercalation and light-harvesting experiments. Only the vesicles exhibiting the sheet-like DNA alignment are accessible for intercalation by ethidium bromide or for the integration of chromophore-labelled DNA via a strand exchange process. The dynamic nature of type I vesicles enables their elaboration into artificial light-harvesting complexes by DNA-guided introduction of Cy3-acceptor chromophores. DNA-constructed vesicles of the kind shown here represent versatile intermediates that are amenable to further modification for tailored nanotechnology applications.

Supramolecular Nanoscaffolds within Cytomimetic Protocells as Signal Localization Hubs

The programmed construction of functional synthetic cells requires spatial control over arrays of biomolecules within the cytomimetic environment. The mimicry of the natural hierarchical assembly of biomolecules remains challenging due to the lack of an appropriate molecular toolbox. Herein, we report the implementation of DNA-decorated supramolecular assemblies as dynamic and responsive nanoscaffolds for the localization of arrays of DNA signal cargo within hierarchically assembled complex coacervate protocells. Protocells stabilized with a semipermeable membrane allow trafficking of single-stranded DNA between neighboring protocells. DNA duplex operations demonstrate the responsiveness of the nanoscaffolds to different input DNA strands via the reversible release of DNA cargo. Moreover, a second population of coacervate protocells with nanoscaffolds featuring a higher affinity for the DNA cargo enabled chemically programmed communication between both protocell populations. This combination of supramolecular structure and function paves the way for the next generation of protocells imbued with programmable, lifelike behaviors.

Control of Energy Transfer Between Pyrene- and Perylene-Nucleosides by the Sequence of DNA-Templated Supramolecular Assemblies

DNA was used as supramolecular scaffold to order chromophores and control their optical properties. Ethynylpyrene as energy donor was attached to 2'-desoxy-2-aminoadenosine that binds selectively to thymidines (T) in the template. Ethynylperylene as acceptor was attached to 2'-desoxyuridine that is complementary to 2'-desoxyadenosine (A). This donor-acceptor pair was assembled along single-stranded DNA templates of different A-T sequences to investigate the sequence control of the energy transfer between the chromophores. The fluorescence intensities increase in the mixed assemblies along the DNA templates from A10T10 over (AATT)5 to (AT)10, although these templates provide equal numbers of potential binding sites for the two different nucleoside chromophore conjugates and exhibit similar absorbances. This shows that the sequence selective assembly of the two building blocks along DNA templates is programmable and alters the fluorescence readout. Such sequence-controlled supramolecular chemistry represents the key element for future functional π-systems in materials for light harvesting of solar energy.

Stepwise Folding and Self-Assembly of a Merocyanine Folda-Pentamer

Here we report a synthetic protocol toward a merocyanine (MC) pentamer 1 which represents the first merocyanine oligomer longer than a dimer. By continuously decreasing the solvent polarity, we demonstrate the stepwise folding from partially folded monomeric and dimeric MC subunits (in chloroform) up to the full pentamer π-stack (in 75% methylcyclohexane/25% chloroform) and a subsequent self-assembly of pentamer 1 into larger aggregates (in 80% methylcyclohexane/20% chloroform). This hierarchical structure formation process became possible due to the predominant dipole-dipole interactions among MC dyes that allowed for a precise modulation of the energy landscape by the solvent polarity. This unprecedented stepwise control of dye assembly via hierarchical dipole-dipole interactions opens the door for a more precise control of dye-dye interactions in artificial multichromophoric ensembles.