Hydrosoluble Cu(i)-DAPTA complexes: synthesis, characterization, luminescence thermochromism and catalytic activity for microwave-assisted three-component azide-alkyne cycloaddition click reaction

Strategy for an Effective Eco-Optimized Design of Heteroleptic Cu(I) Coordination Polymers Exhibiting Thermally Activated Delayed Fluorescence

The new series of copper(I) coordination polymers [Cu(N-N)(μ-PTA)]n[PF6]n {N-N = dmbpy (1), bpy (2), ncup (3), and phen (4)} were generated by straightforward reaction in solution or through a mechanochemical route, of [Cu(MeCN)4][PF6] with 1,3,5-triaza-7-phosphaadamantane (PTA) and the corresponding polypyridines, namely, 5,5'-dimethyl-2,2'-bipyridine (dmbpy), 2,2'-bipyridine (bpy), 2,9-dimethyl-1,10-phenanthroline (ncup), and 1,10-phenanthroline (phen). The compounds were obtained as air-stable solids and fully characterized by IR, NMR spectroscopy, and elemental analyses. The molecular structures were confirmed by single-crystal X-ray diffraction analysis (for 1, 2, and 4), revealing infinite one-dimensional (1D) linear chains driven by μ-PTA N,P-linkers. All tested Cu(I) polymeric compounds show emission at room temperature, which was attributed to thermally activated delayed fluorescence (TADF). Evidence of the involvement of the excited singlet state in the emission process is presented. Comparing the photophysical properties of 1 and 2 as well as 3 and 4, of which 1 and 3 have a stiffened structure, by introducing a methyl group to one of the ligands, we demonstrate how TADF properties depend on molecular rigidity. It is shown that stiffening of the structure reduces the flattening distortion around the Cu(I) center in the 3MLCT state. As a result, the ΔE(S1-T1) energy gap becomes smaller and the fluorescence quantum yield increases without significantly extending the emission lifetime. In particular, the ΔE(S1-T1) values for complexes 1 and 3 are among the shortest reported in the scientific literature, 253 and 337 cm-1, and the TADF lifetimes are τ(300 K) = 5.7 and 4.2 μs, respectively. The fluorescence quantum yields for these complexes are measured to be ΦPL(300 K) = 70 and 80%.

Anticancer water-soluble organoruthenium complexes: synthesis and preclinical evaluation

The synthesis, characterisation, and evaluation of the in vitro cytotoxicity of five maleonitriledithiolate‐based ruthenium metal complexes bearing various phosphine ligands towards two ovarian cancer cell lines (A2780 and A2780cisR), one non‐small‐cell lung cancer cell line (H460) and one normal prostate cell line (PNT2) are presented herein. These 18‐electron complexes were designed with four water‐soluble phosphine ligands to increase the water‐solubility character of the corresponding electron‐deficient ruthenium complex which showed great in vitro promises, and triphenylphosphine for comparison. The complexes with triphenylphosphine‐3,3′,3′′‐trisulfonic acid and triphenylphosphine present similar cytotoxicity compared to the 16‐electron precursor, with equal cytotoxicity to both A2780 and A2780cisR. Hints at the mechanism of action suggest an apoptotic pathway based on reactive oxygen species (ROS) production. No toxicity was observed in preliminary in vivo pilot studies for these two complexes in subcutaneous A2780 and A2780cisR xenograft models, with some evidence of tumour growth delay.

Heterogeneous Gold Nanoparticle-Based Catalysts for the Synthesis of Click-Derived Triazoles via the Azide-Alkyne Cycloaddition Reaction

A supported gold nanoparticle-catalyzed strategy has been utilized to promote a click chemistry reaction for the synthesis of 1,2,3-triazoles via the azide-alkyne cycloaddition (AAC) reaction. While the advent of effective non-copper catalysts (i.e., Ru, Ag, Ir) has demonstrated the catalysis of the AAC reaction, additional robust catalytic systems complementary to the copper catalyzed AAC remain in high demand. Herein, Au nanoparticles supported on Al2O3, Fe2O3, TiO2 and ZnO, along with gold reference catalysts (gold on carbon and gold on titania supplied by the World Gold Council) were used as catalysts for the AAC reaction. The supported Au nanoparticles with metal loadings of 0.7–1.6% (w/w relative to support) were able to selectively obtain 1,4-disubstituted-1,2,3-triazoles in moderate yields up to 79% after 15 min, under microwave irradiation at 150 °C using a 0.5–1.0 mol% catalyst loading through a one-pot three-component (terminal alkyne, organohalide and sodium azide) procedure according to the “click” rules. Among the supported Au catalysts, Au/TiO2 gave the best results.

Synthesis of a Novel Series of Cu(I) Complexes Bearing Alkylated 1,3,5-Triaza-7-phosphaadamantane as Homogeneous and Carbon-Supported Catalysts for the Synthesis of 1- and 2-Substituted-1,2,3-triazoles

The N-alkylation of 1,3,5-triaza-7-phosphaadamantane (PTA) with ortho-, meta- and para-substituted nitrobenzyl bromide under mild conditions afforded three hydrophilic PTA ammonium salts, which were used to obtain a new set of seven water-soluble copper(I) complexes. The new compounds were fully characterized and their catalytic activity was investigated for the low power microwave assisted one-pot azide-alkyne cycloaddition reaction in homogeneous aqueous medium to obtain disubstituted 1,2,3-triazoles. The most active catalysts were immobilized on activated carbon (AC), multi-walled carbon nanotubes (CNT), as well as surface functionalized AC and CNT, with the most efficient support being the CNT treated with nitric acid and NaOH. In the presence of the immobilized catalyst, several 1,4-disubstituted-1,2,3-triazoles were obtained from the reaction of terminal alkynes, organic halides and sodium azide in moderate yields up to 80%. Furthermore, the catalyzed reaction of terminal alkynes, formaldehyde and sodium azide afforded 2-hydroxymethyl-2H-1,2,3-triazoles in high yields up to 99%. The immobilized catalyst can be recovered and recycled through simple workup steps and reused up to five consecutive cycles without a marked loss in activity. The described catalytic systems proceed with a broad substrate scope, under microwave irradiation in aqueous medium and according to "click rules".

A new amido-phosphane as ligand for copper and silver complexes. Synthesis, characterization and catalytic application for azide-alkyne cycloaddition in glycerol

The new sterically hindered amido-phosphane 1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane-3,7-diylbis(phenylmethanone), DBPTA (1), has been obtained via an open-cage double N-acylation of 1,3,5-triaza-7-phosphadamantane (PTA) using benzoic anhydride. DBPTA is the only acyl derivative of PTA that contains an aromatic appendage. Due to the bulky nature of the benzoyl C(O)Ph groups, they exhibit mutual anti configuration as confirmed by solution NMR and single crystal X-ray diffraction. Compound 1 is readily soluble in common polar organic and green solvents, making it a very versatile ligand that could be used in a variety of reaction systems. To assess the coordination characteristics of the new phosphane, seven copper complexes of formulas [Cu(DBPTA)4]BF4 (2), [CuX(DBPTA)3] {X = Br (3) and I (4)}, [Cu(μ-X)(DBPTA)2]2 {X = Br (5) and I (6)}, [Cu(bpy)(DBPTA)2]Y {Y = BF4 (7) and BPh4 (8)} {bpy = 2,2'-bipyridine}, and three silver complexes with formulas [Ag(DBPTA)4]NO3 (9), [Ag(Tpm*)(DBPTA)]NO3 (10) and [Ag(Tpms)(DBPTA)] (11) {Tpm* = tris(3,5-dimethyl-1-pyrazolyl)methane, Tpms = tris(pyrazol-1-yl)methanesulfonate} have been synthesised. Compounds 1-11 were characterized by elemental analyses and electrospray ionization mass spectrometry (ESI-MS), as well as by FT-IR and NMR (1H, 13C, 31P, COSY and HSQC) spectroscopic techniques. The catalytic activity of the complexes has been investigated for 1,3-dipolar azide-alkyne cycloaddition reaction using glycerol as a reaction medium to afford 1,4-disubstituted-1,2,3-triazoles. Complex 7 was found to be the most efficient catalyst, affording triazoles in yields up to 97% after 18 h under standard bench experimental conditions (at 23 °C, aerobic conditions and in the absence of any additional bases) and up to 98% after 15 minutes under microwave irradiation (125 °C, 30 W). The catalysis proceeds with a broad substrate scope according to "Click" rules providing a significant contribution to "Green Chemistry".

Microwave-assisted multicomponent reactions in heterocyclic chemistry and mechanistic aspects

Microwave-assisted (MWA) multicomponent reactions (MCRs) have successfully emerged as one of the useful tools in the synthesis of biologically relevant heterocycles. These reactions are strategically employed for the generation of a variety of heterocycles along with multiple point diversifications. Over the last few decades classical MCRs such as Ugi, Biginelli, etc. have witnessed enhanced yield and efficiency with microwave assistance. The highlights of MWA-MCRs are high yields, reduced reaction time, selectivity, atom economy and simpler purification techniques, such an approach can accelerate the drug discovery process. The present review focuses on the recent advances in MWA-MCRs and their mechanistic insights over the past decade and shed light on its advantage over the conventional approach.

Synthesis of Hydrophilic Phosphorus Ligands and Their Application in Aqueous-Phase Metal-Catalyzed Reactions

Transition metal-catalyzed reactions in aqueous media are experiencing a constant increase in interest. In homogenous catalysis the use of water as a solvent offers advantages in cost, safety, the possibility of two-phase catalysis and simplified separation strategies. In the life sciences, transition metal catalysis in aqueous systems enables the ligation or modification of biopolymers in buffer systems or even in their cellular environment. In biocatalysis, aqueous systems allow the simultaneous use of enzymes and transition metal catalysts in cascade reactions. The use of water-soluble phosphine ligands still represents the most reliable and popular strategy for transferring metal catalysts into the aqueous phase. This review summarizes the recent advancements in this field since 2009 and describes current synthetic strategies for the preparation of hydrophilic phosphines and phosphites. In addition, recent applications of transition metal catalysis in aqueous solvents using these hydrophilic ligands are presented.

The Catalytic Activity of Carbon-Supported Cu(I)-Phosphine Complexes for the Microwave-Assisted Synthesis of 1,2,3-Triazoles

A set of Cu(I) complexes with 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo-[3.3.1]nonane (DAPTA) phosphine ligands viz. [CuX(κP-DAPTA)3] (1: X = Br; 2: X = I) and [Cu(μ-X)(κP-DAPTA)2]2 (3: X = Br; 4: X = I) were immobilized on activated carbon (AC) and multi-walled carbon nanotubes (CNT), as well as on these materials after surface functionalization. The immobilized copper(I) complexes have shown favorable catalytic activity for the one-pot, microwave-assisted synthesis of 1,2,3-triazoles via the azide-alkyne cycloaddition reaction (CuAAC). The heterogenized systems with a copper loading of only 1.5–1.6% (w/w relative to carbon), established quantitative conversions after 15 min, at 80 °C, using 0.5 mol% of catalyst loading (relative to benzyl bromide). The most efficient supports concerning heterogenization were CNT treated with nitric acid and NaOH, and involving complexes 2 and 4 (in the same order, 2_CNT-ox-Na and 4_CNT-ox-Na). The immobilized catalysts can be recovered and recycled by simple workup and reused up to four consecutive cycles although with loss of activity.

Recent Advances in Microwave-Assisted Copper-Catalyzed Cross-Coupling Reactions

Cross-coupling reactions furnishing carbon–carbon (C–C) and carbon–heteroatom (C–X) bond is one of the most challenging tasks in organic syntheses. The early developed reaction protocols by Ullmann, Ullman–Goldberg, Cadiot–Chodkiewicz, Castro–Stephens, and Corey–House, utilizing elemental copper or its salts as catalyst have, for decades, attracted and inspired scientists. However, these reactions were suffering from the range of functional groups tolerated as well as severely restricted by the harsh reaction conditions often required high temperatures (150–200 °C) for extended reaction time. Enormous efforts have been paid to develop and achieve more sustainable reaction conditions by applying the microwave irradiation. The use of controlled microwave heating dramatically reduces the time required and therefore resulting in increase in the yield as well as the efficiency of the reaction. This review is mainly focuses on the recent advances and applications of copper catalyzed cross-coupling generation of carbon–carbon and carbon–heteroatom bond under microwave technology.

Water-Soluble O-, S- and Se-Functionalized Cyclic Acetyl-triaza-phosphines. Synthesis, Characterization and Application in Catalytic Azide-alkyne Cycloaddition

The 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane (DAPTA) derivatives, viz. the already reported 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane 5-oxide (DAPTA=O, 1), the novel 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane-5-sulfide (DAPTA=S, 2), and 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane-5-selenide (DAPTA=Se, 3), have been synthesized under mild conditions. They are soluble in water and most common organic solvents and have been characterized using ¹H and ³¹P NMR spectroscopy and, for 2 and 3, also by single crystal X-ray diffraction. The effect of O, S, or Se at the phosphorus atom on the structural features of the compounds has been investigated, also through the analyses of Hirshfeld surfaces. The presence of 1–3 enhances the activity of copper for the catalytic azide-alkyne cycloaddition reaction in an aqueous medium. The combination of cheaply available copper (II) acetate and compound 1 has been used as a catalyst for the one-pot and 1,4-regioselective procedure to obtain 1,2,3-triazoles with high yields and according to ‘click rules’.

Three thiacalix[4]arene-based Cu(i) coordination polymers: catalytic activities for azide-alkyne cycloaddition reactions and luminescence properties

Three new coordination polymers, [Cu₂(CN)(L)(OCH₃)]·CH₃OH·3H₂O (1), [Cu₃(Br)₃(L)] (2) and [Cu(I)(L)]·1.5H₂O (3), have been solvothermally prepared by reacting L (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[(3-pyridylmethyl)oxy]-2,8,14,20-tetrathiacalix[4]arene) with Cu(i) halide. 1 and 2 exhibit layers. 3 displays a chain, a supramolecular layer constructed by hydrogen bonds. The performance of 1-3 was examined as heterogeneous catalysts for azide-alkyne cycloaddition reactions. Most strikingly, 1 and 2 show predominant efficiency with high regioselectivity and excellent recyclability. Remarkably, solids 1-3 all have luminescence characteristics under irradiation with a UV lamp.

Synthesis, Structural, and Cytotoxic Properties of New Water-Soluble Copper(II) Complexes based on 2,9-Dimethyl-1,10-Phenanthroline and Their One Derivative Containing 1,3,5-Triaza-7-Phosphaadamantane-7-Oxide

A series of water-soluble copper(II) complexes based on 2,9-dimethyl-1,10-phenanthroline (dmphen) and mixed-ligands, containing PTA=O (1,3,5-triaza-7-phosphaadamantane-7-oxide) have been synthesized and fully characterized. Two types of complexes have been obtained, monocationic [Cu(NO₃)(O-PTA=O)(dmphen)][PF₆] (1), [Cu(Cl)(dmphen)₂][PF₆] (2), and neutral [Cu(NO₃)₂(dmphen)] (3). The solid-state structures of all complexes have been determined by single-crystal X-ray diffraction. Magnetic studies for the complex 1–3 indicated a very weak antiferromagnetic interaction between copper(II) ions in crystal lattice. Complexes were successfully evaluated for their cytotoxic activities on the normal human dermal fibroblast (NHDF) cell line and the antitumor activity using the human lung carcinoma (A549), epithelioid cervix carcinoma (HeLa), colon (LoVo), and breast adenocarcinoma (MCF-7) cell lines. Complexes 1 and 3 revealed lower toxicity to NHDF than A549 and HeLa cells, meanwhile compound 2 appeared to be more toxic to NHDF cell line in comparison to all cancer lines. Additionally, interactions between the complexes and human apo-transferrin (apo-Tf) using fluorescence and circular dichroism (CD) spectroscopy were also investigated. All compounds interacted with apo-transferrin, causing same changes of the protein conformation. Electrostatic interactions dominate in the 1/2 – apo- Tf systems and hydrophobic and ionic interactions in the case of 3.

Luminescent phosphine copper(i) complexes with various functionalized bipyridine ligands: synthesis, structures, photophysics and computational study

A new series of luminescent phosphine copper(i) complexes with cyano- and hydroxyl-substituted 2,2′-bipyridine ligands have been synthesized and structurally characterized. Their luminescent properties have also been investigated in detail.

Light-stable polypyridine silver(i) complexes of 1,3,5-triaza-7-phosphaadamantane (PTA) and 1,3,5-triaza-7-phosphaadamantane-7-sulfide (PTA[double bond, length as m-dash]S): significant antiproliferative activity of representative examples in aqueous media

A series of novel silver(i) 2,2':6',2''-terpyridine (tpy), 4'-(4-methylphenyl)-2,2':6':2''-terpyridine (tpy-Ph-Me) and 1,10-phenanthroline-5,6-dione (dione) derivatives containing PTA (1,3,5-triaza-7-phosphaadamantane) or 1,3,5-triaza-7-phosphaadamantane-7-sulfide (PTA[double bond, length as m-dash]S) have been synthesized and fully characterized. Two types of complexes have been obtained, monocationic [Ag(tpy)(PTA)](NO₃) (1), [Ag(tpy-Ph-Me)(PTA)](NO₃) (2), [Ag(dione)(PTA[double bond, length as m-dash]S)](BF₄) (4) and [Ag(dione)₂](PF₆) (5) and neutral [Ag(dione)(PTA[double bond, length as m-dash]S)(NO₃)] (3). The solid-state structures of four complexes have been determined by single-crystal X-ray diffraction. Complexes 1 and 2 are luminescent at room temperature and 77 K while 5 shows emission only at 77 K. Compounds 3 and 4 are not emissive. Furthermore, representative light-stable and water-soluble 1 and 3 were evaluated for their cytotoxic activities on the normal human dermal fibroblast (NHDF) cell line and their antitumor activity using the human lung carcinoma (A549), epithelioid cervix carcinoma (HeLa) and human breast adenocarcinoma (MCF-7) cell lines. Interactions between the complexes and human serum albumin (HSA) using UV-Vis, fluorescence and circular dichroism spectroscopy (CD) were also investigated.

Arylhydrazone ligands as Cu-protectors and -catalysis promoters in the azide-alkyne cycloaddition reaction

A series of water soluble copper(ii) complexes, [Cu(κO¹O²N-H₂L¹)(H₂O)₂]·2H₂O (2), [Cu(κO-H₃L¹)₂(H₂O)₄] (3), [Cu(κO-H₄L²)₂(H₂O)₄] (5) and [Cu(H₂O)₆]·2H₂L³·2(CH₃)₂NCHO (7), were prepared by the reaction of Cu(NO₃)₂·3H₂O with sodium (Z)-2-(2-(1-amino-1,3-dioxobutan-2-ylidene)hydrazineyl)benzenesulfonate, [Na(μ₄-1:2κO¹,2κO²,3κO³,4κO⁴-H₃L¹)]_n (1; for 2 and 3), sodium (Z)-3-(2-(1-amino-1,3-dioxobutan-2-ylidene)hydrazineyl)-4-hydroxybenzene-sulfonate, [Na(μ-1κO¹,2κO²-H₄L²)]₂ (4; for 5) or sodium (Z)-2-(2-(1,3-dioxo-1-(phenylamino)butan-2-ylidene)hydrazineyl)naphthalene-1-sulfonate, [Na(μ-1κO¹O²,2κO³-H₂L³)(CH₃OH)₂]₂ (6; for 7). Compounds 1-7 were fully characterized, also by single-crystal X-ray diffraction analysis, and applied as homogeneous catalysts for the azide-alkyne cycloaddition (AAC) reaction to afford 1,4-disubstituted 1,2,3-triazoles. A structure-catalytic activity relationship has been recognized for the first time on the basis of the occurrence of resonance- and charge-assisted hydrogen bond interactions (RAHB and CAHB), in charge and ligand binding modes, enabling the catalytic activity of the compounds to be ordered as follows: Cu(NO₃)₂≪7 (complex salt with RAHB and CAHB) < 3 (with RAHB and CAHB) < 5 (with RAHB) < 2 (neither RAHB nor CAHB). Complex 2, without such non-covalent interactions, was found to be the most efficient catalyst for the AAC reaction, affording up to 98% product yield after being placed for 15 min, at 125 °C, in a water/acetonitrile mixture under low power (10 W) MW irradiation.

Catalytic activity of new heteroleptic [Cu(PPh3)2(β-oxodithioester)] complexes: click derived triazolyl glycoconjugates

Highly efficient and reusable precatalysts of Cu(i) β-oxodithioester PPh₃ complexes for the synthesis of triazolyl glycoconjugates under “click” conditions.

Highly efficient structurally characterised novel precatalysts: di- and mononuclear heteroleptic Cu(i) dixanthate/xanthate–phosphine complexes for azide–alkyne cycloadditions

Prominent catalytic activities of novel di- and mononuclear Cu(i) xanthate/phosphine complexes have been investigated for the synthesis of triazolyl glycoconjugates using Click approach.