Zinc Dicyanamide: A Potential High-Capacity Negative Electrode for Li-Ion Batteries

We demonstrate that the β-polymorph of zinc dicyanamide, Zn[N(CN)2]2, can be efficiently used as a negative electrode material for lithium-ion batteries. Zn[N(CN)2]2 exhibits an unconventional increased capacity upon cycling with a maximum capacity of about 650 mAh·g-1 after 250 cycles at 0.5C, an increase of almost 250%, and then maintaining a large reversible capacity of more than 600 mAh·g-1 for 150 cycles. Such an increased capacity is primarily attributed to the increased level of activity in the conversion reaction. A combination of conversion-type and alloy-type mechanisms is revealed in this anode material via advanced characterization studies and theoretical calculations. This mechanism, observed here for the first time in transition-metal dicyanamides, is probably responsible for the outstanding electrochemical performance. We believe that this study guides the development of new high-capacity anode materials.

Optimized Phase and Crystallinity of Cr2(NCN)3 Dominating Electrochemical Lithium Storage Performance

Cr2(NCN)3 is a potentially high-capacity and fast-charge Li-ion anode owing to its abundant and broad tunnels. However, high intrinsic chemical instability severely restricts its capacity output and electrochemical reversibility. Herein we report an effective crystalline engineering method for optimizing its phase and crystallinity. Systematic studies reveal the relevancy between electrochemical performance and crystalline structure; an optimal Cr2(NCN)3 with high phase purity and uniform crystallinity exhibits a high reversible capacity of 590 mAh g-1 and a stable cycling performance of 478 mAh g-1 after 500 cycles. In-operando heating XRD reveals its high thermodynamical stability over 600 °C, and in-operando electrochemical XRD proves its electrochemical Li storage mechanism, consisting of the primary Li-ion intercalation and subsequent conversion reactions. This study introduces a facile and low-cost method for fabricating high-purity Cr2(NCN)3, and it also confirms that the Li storage of Cr2(NCN)3 can be further improved by tuning its phase and crystallinity.

Synthesis of LaCN3, TbCN3, CeCN5, and TbCN5 Polycarbonitrides at Megabar Pressures

Inorganic ternary metal-C-N compounds with covalently bonded C-N anions encompass important classes of solids such as cyanides and carbodiimides, well known at ambient conditions and composed of [CN]- and [CN2]2- anions, as well as the high-pressure formed guanidinates featuring [CN3]5- anion. At still higher pressures, carbon is expected to be 4-fold coordinated by nitrogen atoms, but hitherto, such CN4-built anions are missing. In this study, four polycarbonitride compounds (LaCN3, TbCN3, CeCN5, and TbCN5) are synthesized in laser-heated diamond anvil cells at pressures between 90 and 111 GPa. Synchrotron single-crystal X-ray diffraction (SCXRD) reveals that their crystal structures are built of a previously unobserved anionic single-bonded carbon-nitrogen three-dimensional (3D) framework consisting of CN4 tetrahedra connected via di- or oligo-nitrogen linkers. A crystal-chemical analysis demonstrates that these polycarbonitride compounds have similarities to lanthanide silicon phosphides. Decompression experiments reveal the existence of LaCN3 and CeCN5 compounds over a very large pressure range. Density functional theory (DFT) supports these discoveries and provides further insight into the stability and physical properties of the synthesized compounds.

Stabilization Of The CN3 5- Anion In Recoverable High-pressure Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) Oxoguanidinates

A series of isostructural Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) oxoguanidinates was synthesized under high-pressure (25-54 GPa) high-temperature (2000-3000 K) conditions in laser-heated diamond anvil cells. The crystal structure of this novel class of compounds was determined via synchrotron single-crystal X-ray diffraction (SCXRD) as well as corroborated by X-ray absorption near edge structure (XANES) measurements and density functional theory (DFT) calculations. The Ln3 O2 (CN3 ) solids are composed of the hitherto unknown CN3 5- guanidinate anion-deprotonated guanidine. Changes in unit cell volumes and compressibility of Ln3 O2 (CN3 ) (Ln=La, Eu, Gd, Tb, Ho, Yb) compounds are found to be dictated by the lanthanide contraction phenomenon. Decompression experiments show that Ln3 O2 (CN3 ) compounds are recoverable to ambient conditions. The stabilization of the CN3 5- guanidinate anion at ambient conditions provides new opportunities in inorganic and organic synthetic chemistry.

Engineering Electrode Rinse Solution Fluidics for Carbon-Based Reverse Electrodialysis Devices

Natural salinity gradients are a promising source of so-called "blue energy", a renewable energy source that utilizes the free energy of mixing for power generation. One promising blue energy technology that converts these salinity gradients directly into electricity is reverse electrodialysis (RED). Used at its full potential, it could provide a substantial portion of the world's electricity consumption. Previous theoretical and experimental works have been done on optimizing RED devices, with the latter often focusing on precious and expensive metal electrodes. However, in order to rationally design and apply RED devices, we need to investigate all related transport phenomena─especially the fluidics of salinity gradient mixing and the redox electrolyte at various concentrations, which can have complex intertwined effects─in a fully functioning and scalable system. Here, guided by fundamental electrochemical and fluid dynamics theories, we work with an iron-based redox electrolyte with carbon electrodes in a RED device with tunable microfluidic environments and study the fundamental effects of electrolyte concentration and flow rate on the potential-driven redox activity and power output. We focus on optimizing the net power output, which is the difference between the gross power output generated by the RED device and the pumping power input, needed for salinity gradient mixing and redox electrolyte reactions. We find through this holistic approach that the electrolyte concentration in the electrode rinse solution is crucial for increasing the electrical current, while the pumping power input depends nonlinearly on the membrane separation distance. Finally, from this understanding, we designed a five cell-pair (CP) RED device that achieved a net power density of 224 mW m-2 CP-1, a 60% improvement compared to the nonoptimized case. This study highlights the importance of the electrode rinse solution fluidics and composition when rationally designing RED devices based on scalable carbon-based electrodes.

Computational Design and Theoretical Properties of WC3N6, an H-Free Melaminate and Potential Multifunctional Material

By means of first-principles theory, existence, synthetic conditions, and structural as well as physicochemical properties have been predicted for the first hydrogen-free melaminate salt of the composition WC₃N₆. We find at least two energetically favorable polymorphs adopting space groups P1 and P3, both of which are layer-like porous materials. In addition to sizable Madelung fields stabilizing saltlike WC₃N₆, the complex C₃N₆^6- anions are connected via perfectly optimized W-N bonds, forming WN₅ in the P1 and WN₆ coordination polyhedra in the P3 polymorphs. The band gaps of the P1 and P3 phases are HSE-predicted as 2.25 and 1.21 eV, respectively, significantly smaller than those of g-C₃N₄ and WO₃. Moreover, both phases have suitable band-edge potentials that may provide sufficient driving force for photocatalytic water splitting; at least for the P1 phase, there is also a reasonable chance for reduced electron-hole recombination. In addition, the polymorphs's large optical absorption coefficients should greatly enhance the photocatalytic performance. WC₃N₆ defines a new class of compounds and has unique structural characteristics, mirrored from its electrical and optical properties, and it should provide another chemical path for preparing efficient photocatalysts and optoelectronic devices.

NiAs-derived cyanamide (carbodiimide) structures – a group-theoretical view

The cyanamide and carbodiimide anions are complex nitrogen-derived one-dimensional species of the type NCN2− (hence, resembling O2− but more covalently bonding) that form a huge number of salt-like phases with a variety of metal cations stemming from the whole Periodic Table. Depending on the coloring (binary, ternary and quaternary salts are known), the cationic size and charge as well as covalent contributions, different distortion (tilting in particular) and/or vacancy ordering variants of cyanamides/carbodiimides occur. Herein we summarize those cyanamide/carbodiimide structures that derive from the aristotype NiAs. The crystal chemistry is discussed on the basis of group-subgroup schemes (Bärnighausen trees).

Controlled phase and crystallinity of FeNCN/NC dominating sodium storage performance

FeNCN is a potentially fast-charging sodium ion anode due to the presence of lots of broad tunnels and its high electronic conductivity. However, FeNCN has been rarely investigated due to its complicated synthetic process and unclear synthetic mechanism, which affect the precise control of its phase and crystallinity. In this work, phase- and crystallinity-controlled FeNCN polyhedrons grown on nitrogen-doped carbon (FeNCN/NC) are successfully fabricated by adjusting the growing time and temperature. Moreover, the synthesis mechanism is disclosed in this paper. High-crystallinity FeNCN grows along the [001] direction, which exposes sufficient broad channels on the {010} planes and significantly improves the diffusion rate of sodium ions. Moreover, high-crystallinity FeNCN exhibits higher mechanical strength, which reduces its pulverization rate and endows it with durable cycling stability. When applied as an anode in a sodium-ion battery, high-crystallinity FeNCN/NC exhibits a high rate capability of 332 mA h g^-1 at 5.0 A g^-1 and a stable cycling performance of 368 mA h g^-1 after 300 cycles at a high current density of 1.0 A g^-1. This work confirms that the sodium-ion storage performance of FeNCN can be further improved by tuning its crystallinity.

Metastable FeCN2@nitrogen-doped carbon with high pseudocapacitance as an anode material for sodium ion batteries

Pseudocapacitive materials are good candidates for fast charging anodes of sodium ion batteries (SIB). However, pseudocapacitive materials with a high surface area face the severe problem of low initial coulombic efficiency. In this work, micro-sized nitrogen-doped carbon (NC) coated and supported polyhedron FeCN₂ networks are designed and synthesized by a facile in situ gel-swelling technique. Impressively, FeCN₂@NC as an SIB anode exhibits excellent rate performance with highly reversible rate capacities of 466 and 303 mA h g^-1 at 0.2 and 10.0 A g^-1, respectively. Furthermore, the FeCN₂@NC anode shows a high initial coulombic efficiency (ICE) of 86% due to a low surface area. Electrochemical tests and density functional theory (DFT) calculation indicate that the metastable character enables the low intercalation/conversion reaction energy for FeCN₂ and further greatly promotes the fast pseudocapacitive storage mechanism for FeCN₂@NC. This work provides evidence that FeCN₂ is a new type of metastability induced pseudocapacitive material with high initial coulombic efficiency.

PbCN2 – an elucidation of its modifications and morphologies

Concerning the crystal structure of PbCN2 there exist two different descriptions in the literature, one based on the non-centrosymmetric structure, space group Pna21, another one on the centrosymmetric one in space group Pnma. To elucidate the conditions for their appearance, comprehensive preparative and structural investigations have been conducted which proved the existence of two distinct modifications of PbCN2. A detailed comparison of the two phases is provided. The growth conditions and crystallization processes of the two PbCN2 structures are reported with focus on the influence of the pH value on the products. Depending on the growth conditions several different morphologies arise, namely PbCN2 in needle-shaped and platelet-shaped crystals, as well as pompon-shaped and lance-shaped crystals.

14N, 13C, and 119Sn solid-state NMR characterization of tin(II) carbodiimide Sn(NCN)

We report the first magic-angle spinning (MAS) nuclear magnetic resonance (NMR) study on Sn(NCN). In this compound the spatially elongated (NCN)2− ion is assumed to develop two distinct forms: either cyanamide (N≡C–N2−) or carbodiimide (−N=C=N−). Our 14N MAS NMR results reveal that in Sn(NCN) the (NCN)2− groups exist exclusively in the form of symmetric carbodiimide ions with two equivalent nitrogen sites, which is in agreement with the X-ray diffraction data. The 14N quadrupolar coupling constant | C Q | $\vert {C}_{\text{Q}}\vert $  ≈ 1.1 MHz for the −N=C=N− ion in Sn(NCN) is low when compared to those observed in molecular compounds that comprise cyano-type N≡C– moieties ( | C Q | $\vert {C}_{\text{Q}}\vert $  > 3.5 MHz). This together with the information from 14N and 13C chemical shifts indicates that solid-state NMR is a powerful tool for providing atomic-level insights into anion species present in these compounds. The experimental NMR results are corroborated by high-level calculations with quantum chemistry methods.

First low-spin carbodiimide, Fe2(NCN)3, predicted from first-principles investigations

The structural stability and physical properties of the Fe(III) carbodiimide Fe2(NCN)3 were studied by use of density functional theory. The results indicate that Fe2(NCN)3 (space group R 3 ‾ c $R‾{3}c$ ) is stable both thermodynamically and mechanically. The electronic structure in combination with the phonon dispersion relations suggest that the title compound should be ferromagnetic and half-metallic, and that the Fe3+ ions are in the low-spin state.

Realizing Fast Charge Diffusion in Oriented Iron Carbodiimide Structure for High-Rate Sodium-Ion Storage Performance

Iron carbodiimide (FeNCN) belongs to a type of metal compounds with a more covalent bonding structure compared to common transition metal oxides. It could provide possibilities for various structural designs with improved charge-transfer kinetics in battery systems. Moreover, these possibilities are still highly expected for promoting enhancement in rate performance of sodium (Na)-ion battery. Herein, oriented FeNCN crystallites were grown on the carbon-based substrate with exposed {010} faces along the [001] direction (O-FeNCN/S). It provides a high Na-ion storage capacity with excellent rate capability (680 mAh g^-1 at 0.2 A g^-1 and 360 mAh g^-1 at 20 A g^-1), presenting rapid charge-transfer kinetics with high contribution of pseudocapacitance during a typical conversion reaction. This high rate performance is attributed to the oriented morphology of FeNCN crystallites. Its orientation along [001] maintains preferred Na-ion diffusion along the two directions in the entire morphology of O-FeNCN/S, supporting fast Na-ion storage kinetics during the charge/discharge process. This study could provide ideas toward the understanding of the rational structural design of metal carbodiimides for attaining high electrochemical performance in future.

Predicting Nitrogen-Based Families of Compounds: Transition-Metal Guanidinates TCN3 (T=V, Nb, Ta) and Ortho-Nitrido Carbonates T'2 CN4 (T'=Ti, Zr, Hf)

Due to its unsurpassed capability to engage in various sp hybridizations or orbital mixings, carbon may contribute in expanding solid-state nitrogen chemistry by allowing for different complex anions, such as the known NCN2- carbodiimide unit, the so far unknown CN3 5- guanidinate anion, and the likewise unknown CN4 8- ortho-nitrido carbonate (onc) entity. Because the latter two complex anions have never been observed before, we have chemically designed them using first-principles structural searches, and we here predict the first hydrogen-free guanidinates TCN3 (T=V, Nb, Ta) and ortho-nitrido carbonates T'2 CN4 (T'=Ti, Zr, Hf) being mechanically stable at normal pressure; the latter should coexist as solid solutions with the stoichiometrically identical nitride carbodiimides and nitride guanidinates. We also suggest favorable exothermic reactions as useful signposts for eventual synthesis, and we trust that the decay of the novel compounds is unlikely due to presumably large kinetic activation barriers (C-N bond breaking) and quite substantial Madelung energies stabilizing the highly charged complex anions. While chemical-bonding analysis reveals the novel CN4 8- to be more covalent compared to NCN2- and CN3 5- within related compounds, further electronic-structure data of onc phases hint at their physicochemical potential in terms of photoelectrochemical water splitting and nonlinear optics.

Metathetic synthesis of lead cyanamide as a p-type semiconductor

Lead cyanamide PbNCN was synthesized by solid-state metathesis between PbCl2 and Na2NCN in a 1 : 1 molar ratio, and its structure was confirmed from Rietveld refinement of X-ray data. Electronic-structure calculations of HSE06 density-functional type reveal PbNCN to be an indirect semiconductor with a band gap of 2.4 eV, in remarkable quantitative agreement with the measured value. Mott-Schottky experiments demonstrate PbNCN to be a p-type semiconductor with a flat-band potential of 2.3 eV vs. the reversible hydrogen electrode (RHE) which is commonly used to estimate the value of the valence band edge position. Moreover, thin films of powderous PbNCN were assembled into a photoelectrode for photoelectrochemical water splitting. On the example of p-type PbNCN, this study provides the first experimental evidence that MNCN compounds can be applied as photocathodes for reductive reactions in photoelectrochemical cells.

Tailoring the Surface Properties of Bi2O2NCN by in Situ Activation for Augmented Photoelectrochemical Water Oxidation on WO3 and CuWO4 Heterojunction Photoanodes

Bismuth(III) oxide-carbodiimide (Bi₂O₂NCN) has been recently discovered as a novel mixed-anion semiconductor, which is structurally related to bismuth oxides and oxysulfides. Given the structural versatility of these layered structures, we investigated the unexplored photochemical properties of the target compound for photoelectrochemical (PEC) water oxidation. Although Bi₂O₂NCN does not generate a noticeable photocurrent as a single photoabsorber, the fabrication of heterojunctions with the WO₃ thin film electrode shows an upsurge of current density from 0.9 to 1.1 mA cm^–2 at 1.23 V vs reversible hydrogen electrode (RHE) under 1 sun (AM 1.5G) illumination in phosphate electrolyte (pH 7.0). Mechanistic analysis and structural analysis using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy energy-dispersive X-ray spectroscopy (STEM EDX) indicate that Bi₂O₂NCN transforms during operating conditions in situ to a core–shell structure Bi₂O₂NCN/BiPO₄. When compared to WO₃/BiPO₄, the in situ electrolyte-activated WO₃/Bi₂O₂NCN photoanode shows a higher photocurrent density due to superior charge separation across the oxide/oxide-carbodiimide interface layer. Changing the electrolyte from phosphate to sulfate results in a lower photocurrent and shows that the electrolyte determines the surface chemistry and mediates the PEC activity of the metal oxide-carbodiimide. A similar trend could be observed for CuWO₄ thin film photoanodes. These results show the potential of metal oxide-carbodiimides as relatively novel representatives of mixed-anion compounds and shed light on the importance of the control over the surface chemistry to enable the in situ activation.

Phosphate electrolyte activates the metal oxide−Bi₂O₂NCN heterojunction.

Increased photocurrent of CuWO4 photoanodes by modification with the oxide carbodiimide Sn2O(NCN)

Tin(ii) oxide carbodiimide is a novel prospective semiconductor material with a band gap of 2.1 eV and lies chemically between metal oxides and metal carbodiimides. We report on the photochemical properties of this oxide carbodiimide and apply the material to form a heterojunction with CuWO₄ thin films for photoelectrochemical (PEC) water oxidation. Mott-Schottky experiments reveal that the title compound is an n-type semiconductor with a flat-band potential of -0.03 V and, as such, the position of the valence band edge would be suitable for photochemical water oxidation. Sn₂O(NCN) increases the photocurrent of CuWO₄ thin films from 32 μA cm^-2 to 59 μA cm^-2 at 1.23 V vs. reversible hydrogen electrode (RHE) in 0.1 M phosphate buffer (pH 7.0) under backlight AM 1.5G illumination. This upsurge in photocurrent originates in a synergistic effect between the oxide and oxide carbodiimide, because the heterojunction photoanode displays a higher current density than the sum of its individual components. Structural analysis by powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) reveals that Sn₂O(NCN) forms a core-shell structure Sn₂O(NCN)@SnPO_x during the PEC water oxidation in phosphate buffer. The electrochemical activation is similar to the behavior of Mn(NCN) but different from Co(NCN).

Quantum-Chemical Study of the FeNCN Conversion-Reaction Mechanism in Lithium- and Sodium-Ion Batteries

We report a computational study on 3d transition-metal (Cr, Mn, Fe, and Co) carbodiimides in Li- and Na-ion batteries. The obtained cell voltages semi-quantitatively fit the experiments, highlighting the practicality of PBE+U as an approach for modeling the conversion-reaction mechanism of the FeNCN archetype with lithium and sodium. Also, the calculated voltage profiles agree satisfactorily with experiment both for full (Li-ion battery) and partial (Na-ion battery) discharge, even though experimental atomistic knowledge is missing up to now. Moreover, we rationalize the structural preference of intermediate ternaries and their characteristic lowering in the voltage profile using chemical-bonding and Mulliken-charge analysis. The formation of such ternary intermediates for the lithiation of FeNCN and the contribution of at least one ternary intermediate is also confirmed experimentally. This theoretical approach, aided by experimental findings, supports the atomistic exploration of electrode materials governed by conversion reactions.

A new tilt and an old twist on the nickel arsenide structure-type: synthesis and characterisation of the quaternary transition-metal cyanamides A2MnSn2(NCN)6 (A = Li and Na)

In this work, we describe the synthesis and structure of the quaternary transition-metal cyanamides Na2MnSn2(NCN)6 and Li2MnSn2(NCN)6. These phases crystallise isotypically in layered structures, with P3[combining macron]1m symmetry, that comprise hexagonal close-packed arrays of NCN2- anions with metal cations in 5/6 of the octahedral holes, thereby reflecting low-symmetry modifications of the hierarchical [NiAs]-type MNCN structure. The distinct coordination requirements of the metal cations template an ordered decoration across the octahedral sites with corundum-like [Sn2(NCN)3]2+ layers alternating with [A2Mn(NCN)3]2- layers which resemble a portion of the Li2Zr(NCN)3 structure. This motif is also mirrored in the form of the NCN2- anions which adopt N-C[triple bond, length as m-dash]N2- cyanamide shapes with clear single- and triple-bond character. Distortion-mode analysis reveals the importance of K1 octahedral twist and K2 cyanamide tilt displacements in stabilising these phases, the latter of which is only accessible because of the extended nature of the NCN2- anion. These are the first examples of non-binary transition-metal cyanamides to be discovered and this study highlights how the additional flexibility of the NCN2- anion affords a novel structure-type not observed in oxide chemistry.

Organoaluminum Compounds as Catalysts for Monohydroboration of Carbodiimides

The effective catalytic activity of organoaluminum compounds for the monohydroboration of carbodiimides has been demonstrated. Two aluminum complexes, 2 and 3, were synthesized and characterized. The efficient catalytic performances of four aluminum hydride complexes L1 AlH2 (L1 =HC(CMeNAr)2 , Ar=2,6-Et2 C6 H3 ; 1), L2 AlH2 (NMe3 ) (L2 =o-C6 H4 F(CH=N-Ar), Ar=2,6-Et2 C6 H3 ; 2), L3 AlH (L3 =2,6-bis(1-methylethyl)-N-(2-pyridinylmethylene)phenylamine; 3), and L4 AlH(NMe3 ) (L4 =o-C6 H4 (N-Dipp)(CH=N-Dipp), Dipp=2,6-iPr2 C6 H3 ; 4), and an aluminum alkyl complex L1 AlMe2 (5) were used for the monohydroboration of carbodiimides investigated under solvent-free and mild conditions. Compounds 1-3 and 5 can produce monohydroborated N-borylformamidine, whereas 4 can afford the C-borylformamidine product. A suggested mechanism of this reaction was explored, and the aluminum formamidinate compound 6 was characterized by single-crystal X-ray, also a stoichiometric reaction was investigated.

Band Gap Tuning in Bismuth Oxide Carbodiimide Bi2O2NCN

Layered bismuth oxides exhibit a broad range of tunable physical properties as a result of their excellent structural versatility which facilitates compositional substitutions at both cationic and anionic positions. Here we expand this family in a new direction through the preparation of the first example of a bismuth-containing oxide carbodiimide, Bi₂O₂NCN, which assumes an extended variant of the anti-ThCr₂Si₂ structure-type adopted by Bi₂O₂ Ch ( Ch = Se or Te) oxide chalcogenides. Electronic structure calculations reveal the title compound to be an indirect band gap semiconductor with a band gap of approximately 1.4 eV, in good agreement with the measured value of 1.8 eV, and intermediate between that of structurally related Bi₂O₂S (1.12 eV) and β-Bi₂O₃ (2.48 eV). Mott-Schottky experiments demonstrate Bi₂O₂NCN to be an n-type semiconductor with a conduction band edge position of -0.37 V vs reversible hydrogen electrode. This study highlights the pseudochalcogenide nature of the ^-N═C═N^- carbodiimide anion, which may be substituted in place of oxide or chalcogenide anions in this and potentially other structural classes as an effective means of electronic tuning.

Chloride carbodiimide K12Pb51(CN2)30Cl54 with an unprecedented 45 Å unit cell axis and a large birefringence

K₁₂Pb₅₁(CN₂)₃₀Cl₅₄ exhibits a giant birefringence of 0.094 at 1064 nm and a large cell axis due to the rotation of Pb²⁺ cations.

Syntheses and Characterization of Two Dicyanamide Compounds Containing Monovalent Cations: Hg2[N(CN)2]2 and Tl[N(CN)2]

Crystals of Hg2[N(CN)2]2 were grown by a slow diffusion-reaction between aqueous Hg2(NO3)2·2H2O and Na[N(CN)2]. Hg2[N(CN)2]2 adopts the triclinic space group P 1 ¯ (no. 2) with a = 3.7089(5), b = 6.4098(6), c = 8.150(6) Å, α = 81.575(6)°, β = 80.379(7)°, γ = 80.195(7)°, and Z = 1. Crystals of Tl[N(CN)2] were obtained from the reaction of TlBr with Ag[N(CN)2] in water. Single-crystal structure analyses evidence that Tl[N(CN)2] is isotypic to α-K[N(CN)2] and adopts the orthorhombic space group Pbcm (no. 57) with a = 8.5770(17), b = 6.4756(13), c = 7.2306(14) Å, and Z = 4. Regarding volume chemistry, the dicyanamide anion occupies ca. 44 cm3·mol−1, and so it corresponds to a large pseudohalide. The IR spectra of both compounds exhibit vibrational modes that are characteristic of the dicyanamide anion.