Multifunctional nanozymes: enzyme-like catalytic activity combined with magnetism and surface plasmon resonance

Nanozyme-Enabled Biomedical Diagnosis: Advances, Trends, and Challenges

As nanoscale materials with the function of catalyzing substrates through enzymatic kinetics, nanozymes are regarded as potential alternatives to natural enzymes. Compared to protein-based enzymes, nanozymes exhibit attractive characteristics of low preparation cost, robust activity, flexible performance adjustment, and versatile functionalization. These advantages endow them with wide use from biochemical sensing and environmental remediation to medical theranostics. Especially in biomedical diagnosis, the feature of catalytic signal amplification provided by nanozymes makes them function as emerging labels for the detection of biomarkers and diseases, with rapid developments observed in recent years. To provide a comprehensive overview of recent progress made in this dynamic field, here an overview of biomedical diagnosis enabled by nanozymes is provided. This review first summarizes the synthesis of nanozyme materials and then discusses the main strategies applied to enhance their catalytic activity and specificity. Subsequently, representative utilization of nanozymes combined with biological elements in disease diagnosis is reviewed, including the detection of biomarkers related to metabolic, cardiovascular, nervous, and digestive diseases as well as cancers. Finally, some development trends in nanozyme-enabled biomedical diagnosis are highlighted, and corresponding challenges are also pointed out, aiming to inspire future efforts to further advance this promising field.

The Identification of Oral Cariogenic Bacteria through Colorimetric Sensor Array Based on Single-Atom Nanozymes

Effective identification of multiple cariogenic bacteria in saliva samples is important for oral disease prevention and treatment. Here, a simple colorimetric sensor array is developed for the identification of cariogenic bacteria using single-atom nanozymes (SANs) assisted by machine learning. Interestingly, cariogenic bacteria can increase oxidase-like activity of iron (Fe)─nitrogen (N)─carbon (C) SANs by accelerating electron transfer, and inversely reduce the activity of Fe─N─C further reconstruction with urea. Through machine-learning-assisted sensor array, colorimetric responses are developed as "fingerprints" of cariogenic bacteria. Multiple cariogenic bacteria can be well distinguished by linear discriminant analysis and bacteria at different genera can also be distinguished by hierarchical cluster analysis. Furthermore, colorimetric sensor array has demonstrated excellent performance for the identification of mixed cariogenic bacteria in artificial saliva samples. In view of convenience, precise, and high-throughput discrimination, the developed colorimetric sensor array based on SANs assisted by machine learning, has great potential for the identification of oral cariogenic bacteria so as to serve for oral disease prevention and treatment.

Iron-driven self-assembly of dopamine into dumbbell-shaped nanozyme for visual and rapid detection of norfloxacin on a smartphone-assisted platform

Antibiotics in aquatic environments raise health concerns. Therefore, the rapid, on-site, and accurate detection of antibiotic residues is crucial for protecting the environment and human health. Herein, a dumbbell-shaped iron (Fe3+)-dopamine coordination nanozyme (Fe-DCzyme) was developed via an iron-driven self-assembly strategy. It exhibited excellent peroxidase-like activity, which can be quenched by adding l-cysteine to prevent Fe3+/Fe2+ electron transfer but restored by adding norfloxacin. Given the 'On-Off-On' effect of peroxidase-like activity, Fe-DCzyme was used as a colourimetric sensor for norfloxacin detection, and showed a wide linear range from 0.05 to 6.00 μM (R2 = 0.9950) and LOD of 27.0 nM. A portable smartphone-assisted detection platform using Fe-DCzyme was also designed to convert norfloxacin-induced color changes into RGB values as well as to realise the rapid, on-site and quantitative detection of norfloxacin. A good linear relation (0.10-6.00 μM) and high sensitivity (LOD = 79.3 nM) were achieved for the smartphone-assisted Fe-DCzyme detection platform. Its application was verified using norfloxacin spiking methods with satisfactory recoveries (92.66%-119.65%). Therefore, the portable smartphone-assisted Fe-DCzyme detection platform with low cost and easy operation can be used for the rapid, on-site and visual quantitative detection of antibiotic residues in water samples.

Multifunctional nanozymes for disease diagnosis and therapy

The development of nanotechnology has brought about groundbreaking advancements in diseases' diagnostics and therapeutics. Among them, multifunctional nanomaterials with enzyme-like activities (i.e., nanozymes) featured with high stability, large surface area for bioconjugation, and easy storage, offer unprecedented opportunities for disease diagnostics and treatment. Recent years have witnessed the great progress of nanozyme-based theranostics. To highlight these achievements, this review first introduces the recent advancements on nanozymes in biosensing and diagnostics. Then, it summarizes the applications of nanozymes in therapeutics including anti-tumor and antibacterial treatment, anti-inflammatory treatment, and other diseases treatment. In addition, several targeted strategies to improve the therapeutic efficacy of nanozyme are discussed. Finally, the opportunities and challenges in the field of diagnosis and therapy are summarized.

A natural biogenic nanozyme for scavenging superoxide radicals

Biominerals, the inorganic minerals of organisms, are known mainly for their physical property-related functions in modern living organisms. Our recent discovery of the enzyme-like activities of nanomaterials, coined as nanozyme, inspires the hypothesis that nano-biominerals might function as enzyme-like catalyzers in cells. Here we report that the iron cores of biogenic ferritins act as natural nanozymes to scavenge superoxide radicals. Through analyzing eighteen representative ferritins from three living kingdoms, we find that the iron core of prokaryote ferritin possesses higher superoxide-diminishing activity than that of eukaryotes. Further investigation reveals that the differences in catalytic capability result from the iron/phosphate ratio changes in the iron core, which is mainly determined by the structures of ferritins. The phosphate in the iron core switches the iron core from single crystalline to amorphous iron phosphate-like structure, resulting in decreased affinity to the hydrogen proton of the ferrihydrite-like core that facilitates its reaction with superoxide in a manner different from that of ferric ions. Furthermore, overexpression of ferritins with high superoxide-diminishing activities in E. coli increases the resistance to superoxide, whereas bacterioferritin knockout or human ferritin knock-in diminishes free radical tolerance, highlighting the physiological antioxidant role of this type of nanozymes.

Bioenzyme-free colorimetric assay for creatinine determination based on Mn3O4 nanoparticles catalyzed oxidation of 3,3',5,5'-tetramethylbenzidine

Mn3O4 nanozyme with good oxidase-like activity was successfully synthesized. The prepared Mn3O4 nanozyme can directly and effectively catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to generate green-blue-colored ox-TMB. Creatinine exhibits distinct inhibition effect on Mn3O4 nanozyme-catalyzed TMB colorimetric reaction system, leading to obvious color fading and absorbance intensity decrease of the reaction system. Furthermore, interference from uric acid can be effectively eliminated by regulating the pH of TMB-Mn3O4 colorimetric reaction system to pH 2.0. Then, a simple and bioenzyme-free colorimetric assay for the determination of creatinine was developed based on TMB-Mn3O4 colorimetric reaction. The linear detection range is from 100 to 800 μM and from 1 to 20 mM. The lowest limit of detection is 35.3 μM. Satisfied results are obtained for the determination of creatinine in real urine and sweat samples. This work provides the synthesis of a good oxidase-like nanozyme Mn3O4 and presents the fabrication of an effective nanozyme-based bioenzyme-free colorimetric assay for the determination of creatinine.

Biomimetic dual-nanozymes with catalytic cascade reactions against diabetic wound infection

Diabetes-related chronic wounds characterized by hyperglycemia and weak alkaline milieu provide numerous advantages for bacteria growth and biofilm formation, setting a myriad of stumbling blocks for wound healing. Therefore, reshaping the spatially and temporally pathological wound microenvironment against bacterial infection is critical to rescue stalled healing progress in diabetes-related chronic wounds. Herein, we demonstrate on the room-temperature construction of a glucose oxidase (GOx)-mimicking and peroxidase (POD)-mimicking dual-nanozymes catalytic cascade system upon the partial reduction of Fe3+ to Fe2+ and the deposition of Au nanoparticles, simultaneously. The as-prepared dual-nanozymes catalytic cascade system possesses the capabilities of reshaping the pathological microenvironments of diabetic wound via glucose consumption and acidification, leading to amplified catalytic cascade activities for sterilization. On the one hand, the GOx-mimicking enzymatic activity of the catalytic cascade system can not only deplete glucose and acidize wound milieu to inhibit bacteria growth, but also utilize the weak alkaline milieu of diabetic wound to provide sufficient H2O2 and a favorable pH for subsequent OH generation. On the other hand, the POD-mimicking enzymatic activity of the catalytic cascade system can continuously produce OH for sterilization under the weak acidic milieu in the presence of abundant H2O2. Benefiting from the simply and mild preparation process and the excellent dual-nanozymes catalytic cascade activities under the deliberate evolved milieus of diabetes-related chronic wounds, our catalytic cascade system exhibits the promising healing effect and clinical translation potential against diabetic wound infection.

RhRu Alloy-Anchored MXene Nanozyme for Synergistic Osteosarcoma Therapy

Noble metal nanozymes hold promise in cancer therapy due to adjustable enzyme-like activities, unique physicochemical properties, etc. But catalytic activities of monometallic nanozyme are confined. In this study, 2D titanium carbide (Ti₃ C₂ T_x )-supported RhRu alloy nanoclusters (RhRu/Ti₃ C₂ T_x ) are prepared by a hydrothermal method and utilized for synergistic therapy of chemodynamic therapy (CDT), photodynamic therapy (PDT), and photothermal therapy (PTT) on osteosarcoma. The nanoclusters are small in size (3.6 nm), uniform in distribution, and have excellent catalase (CAT) and peroxidase (POD)-like activities. Density functional theory calculations show that there is a significant electron transfer interaction between RhRu and Ti₃ C₂ T_x , which has strong adsorption to H₂ O₂ and is beneficial to enhance the enzyme-like activity. Furthermore, RhRu/Ti₃ C₂ T_x nanozyme acts as both PTT agent for converting light into heat, and photosensitizer for catalyzing O₂ to ¹ O₂ . With the NIR-reinforced POD- and CAT-like activity, excellent photothermal and photodynamic performance, the synergistic CDT/PDT/PTT effect of RhRu/Ti₃ C₂ T_x on osteosarcoma is verified by in vitro and in vivo experiments. This study is expected to provide a new research direction for the treatment of osteosarcoma and other tumors.

Highly efficient carbon supported Co-Ir nanozyme for the determination of total antioxidant capacity in foods

Nanozyme-based colorimetric assays have aroused extensive attention in biosensing due to quick response, low cost and simplicity. However, their practical applications are limited by the unsatisfactory stability and catalytic activity of nanozymes in complex detection environments. Herein, using the one-pot chemical vapor deposition method, we successfully prepare a highly efficient and stable carbon supported Co-Ir nanozyme (termed as Co-Ir/C nanozyme) for the determination of total antioxidant capacity (TAC) in food samples. The Co-Ir/C nanozyme shows excellent durability under extensive pH ranges, high temperature and high salt concentration due to the protection of carbon supporter. It can be recycled by simple magnetic separation, and its catalytic activity remains stable after long-term operation and storage. Taking full advantage of the superior peroxidase-like activity of Co-Ir/C nanozyme, it is used for colorimetric detection of ascorbic acid (or known as vitamin C), an important vitamin to adjust body's normal physiological function, with results showing higher sensitivity (detection limit of 0.27 μM) than most of the recently published works. Moreover, the determination of TAC in vitamin C tablets and fruits are further achieved, which are in good agreement with those of commercial colorimetric test kits. This study helps guide the rational preparation of versatile and highly stable nanozymes, and develops a robust TAC determination platform for future food quality monitoring.

Peroxidase-like Nanozymes for Point-of-Care SERS Sensing and Wound Healing

The emergence of nanozymes provides a potential method for combating multidrug-resistant bacteria resulted from the abuse of antibiotics. However, in nanozyme-catalyzed systems, few studies have addressed the actual hydrogen peroxide (H₂O₂) level involved in sterilization. Herein, we designed a high-efficiency peroxidase-mimicking nanozyme with surface-enhanced Raman scattering (SERS) property by assembling gold nanoparticles on single-layer Cu²⁺-C₃N₄ (AuNP-Cu²⁺-C₃N₄). The nanozyme effectively converts the low-active Raman reporter 3,3',5,5'-tetramethylbenzidine (TMB) into its oxidized form with H₂O₂, resulting in SERS signal changes, thereby achieving highly sensitive quantification of H₂O₂ with limit of detection as low as 0.60 μM. More importantly, the nanozyme can specifically catalyze H₂O₂ into antibacterial hydroxyl radicals. In vitro and in vivo evaluations demonstrate the remarkable antibacterial efficacy of the nanozyme/H₂O₂ combination against Staphylococcus aureus (up to 99.9%), which could promote wound healing in mice and allow point-of-care monitoring the amount of H₂O₂ participated in effective sterilization. This study not only displays great potential in combining multiple functionalities of nanomaterials for versatile bioassays but also provides a promising approach to design nanozymes for biomedical and catalytic applications.

Au/Fe3O4-based nanozymes with peroxidase-like activity integrated in immunochromatographic strips for highly-sensitive biomarker detection

Because of their simplicity, rapidity, and cost-effectiveness, immunochromatographic strips (ICTs) have been widely used as an effective tool in various fields. However, typical strips for the preliminary screening suffer from limited detection sensitivity, particularly in biomarker detection with trace concentration. Herein, to tackle this challenge, we integrated homemade gold-decorated Fe₃O₄ nanoparticles (Au/Fe₃O₄ NPs) with flexible strips, exploring the excellent peroxidase-like activity of this labeled material, and then enhancing the detection sensitivity via signal amplification. The limit of detection (LOD) of the strips is as low as 0.05 mIU mL^-1 when human chorionic gonadotropin (hCG) is as a biomarker model, which is 500 times lower than that of the traditional color-based strip. Overall, our results demonstrated the potential for Au/Fe₃O₄ NP based-ICTs for the rapid detection of the biomarker in an instrument-free and point-of-care testing format.

Magnetic RuCo aerogels with enhanced peroxidase-like activity by regulation of boron and oxygen vacancies for colorimetric biosensing applications

Metallic aerogels (MAs) are self-supported porous nanomaterials with excellent catalytic activity, which could be a promising candidate for high-performance nanozymes. The interface regulation by heteroatom and vacancies is an effective strategy for boosting the enzyme-mimicking activity. Herein, magnetic RuCo aerogels with doping of boron and oxygen vacancies were prepared by a one-pot spontaneous NaBH₄ gelation method under a low temperature. The three-dimensional network structure with high specific surface area and interlinked pores of RuCo aerogels afford abundant active sites to facilitate the interaction with substrates. Moreover, the monolithic structure avoided conventional aggregation, thus enhancing stability during catalysis. Introducing elemtal boron and oxygen vacancies adjusted the electronic structure of RuCo aerogels to achieve enhanced enzyme-like performances. It is found that the RuCo aerogel nanozyme can mimic nature peroxidase, demonstrating their viable applications in the bioassay of H₂O₂ and glucose. The constructed glucose sensor possesses acceptable sensitivity and stability with a linear range of 0.002 ~ 5 mM and a low detection limit (1.66 μM). This work provides insights into the rational design of advanced nanozymes and paves the avenue for the applications of metallic aerogels in the bioassay field. A boron-doped RuCo bimetallic aerogel with rich oxygen vacancies was prepared by a facile self-assembly method under an ice bath. The unique physical and electronic structure of RuCo aerogel results in the improvement of the intrinsic peroxidaselike activity, and thus, a sensitive and robust colorimetric glucose sensor could be developed.

Bifunctional Mn-Doped N-Rich Carbon Dots with Tunable Photoluminescence and Oxidase-Mimetic Activity Enabling Bimodal Ratiometric Colorimetric/Fluorometric Detection of Nitrite

Multimodal detection is a promising paradigm because of its advantages of expanding usage scenarios and improving reliability. However, it is very challenging to design reasonable strategies to achieve the multimodal sensing of targets. Herein, we developed an unprecedented bimodal ratiometric colorimetric/fluorometric method by exploring a novel bifunctional artificial oxidase mimic, Mn-doped N-rich carbon dots (Mn-CDs), to achieve the high-performance determination of nitrite in complicated matrices. The Mn-CDs exhibited both tunable photoluminescence and high oxidase-like activity, effectively catalyzing the colorless 3,3',5,5'-tetramethylbenzidine (TMB) oxidation to generate blue TMB⁺. When nitrite was introduced, the TMB⁺ species generated would specifically react with nitrite to produce diazotized TMB⁺, resulting in a color change from blue to green and finally to yellow. Simultaneously, the fluorescence of Mn-CDs was quenched by the diazotized TMB⁺ product via the inner filter effect. Hence, the existence of nitrite could lead to the simultaneous variations of visual color and photoluminescence, providing the principal basis for the bimodal ratiometric colorimetric/fluorometric quantification of the target. With the method, excellent sensitivity, selectivity, reliability, and practicability for nitrite detection were verified. Our work proposes a new bimodal strategy for nitrite measurement using bifunctional CDs-based enzyme mimics, which will inspire future effort on the exploration of promising multifunctional nanozymes and their advanced applications in biochemical sensing.

Single-Atomic Iron Doped Carbon Dots with Both Photoluminescence and Oxidase-Like Activity

Multifunctional nanozymes can benefit biochemical analysis via expanding sensing modes and enhancing analytical performance, but designing multifunctional nanozymes to realize the desired sensing of targets is challenging. In this work, single-atomic iron doped carbon dots (SA Fe-CDs) are designed and synthesized via a facile in situ pyrolysis process. The small-sized CDs not only maintain their tunable fluorescence, but also serve as a support for loading dispersed active sites. Monoatomic Fe offers SA Fe-CDs exceptional oxidase-mimetic activity to catalyze 3,3',5,5'-tetramethylbenzidine (TMB) oxidation with fast response (V_max  = 10.4 nM s^-1 ) and strong affinity (K_m  = 168 µM). Meanwhile, their photoluminescence is quenched by the oxidation product of TMB due to inner filter effect. Phosphate ions (Pi) can suppress the oxidase-mimicking activity and restore the photoluminescence of SA Fe-CDs by interacting with Fe active sites. Based on this principle, a dual-mode colorimetric and fluorescence assay of Pi with high sensitivity, selectivity, and rapid response is established. This work paves a path to develop multifunctional enzyme-like catalysts, and offers a simple but efficient dual-mode method for phosphate monitoring, which will inspire the exploration of multi-mode sensing strategies based on nanozyme catalysis.

Synthesis of Gold-Platinum Core-Shell Nanoparticles Assembled on a Silica Template and Their Peroxidase Nanozyme Properties

Bimetallic nanoparticles are important materials for synthesizing multifunctional nanozymes. A technique for preparing gold-platinum nanoparticles (NPs) on a silica core template (SiO₂@Au@Pt) using seed-mediated growth is reported in this study. The SiO₂@Au@Pt exhibits peroxidase-like nanozyme activity has several advantages over gold assembled silica core templates (SiO₂@Au@Au), such as stability and catalytic performance. The maximum reaction velocity (V_max) and the Michaelis–Menten constants (K_m) were and 2.1 × 10⁻¹⁰ M⁻¹∙s⁻¹ and 417 µM, respectively. Factors affecting the peroxidase activity, including the quantity of NPs, solution pH, reaction time, and concentration of tetramethyl benzidine, are also investigated in this study. The optimization of SiO₂@Au@Pt NPs for H₂O₂ detection obtained in 0.5 mM TMB; using 5 µg SiO₂@Au@Pt, at pH 4.0 for 15 min incubation. H₂O₂ can be detected in the dynamic liner range of 1.0 to 100 mM with the detection limit of 1.0 mM. This study presents a novel method for controlling the properties of bimetallic NPs assembled on a silica template and increases the understanding of the activity and potential applications of highly efficient multifunctional NP-based nanozymes.

CoO Nanozymes with Multiple Catalytic Activities Regulate Atopic Dermatitis

Herein, we prepared CoO nanozymes with three types of enzyme catalytic activities for the first time, which have SOD-like, CAT-like, and POD-like catalytic activities. This is the first study to report the preparation of CoO nanoparticles with three types of enzyme catalytic activities by the one-pot method. By modifying the surface of CoO nanozymes with a carboxyl group, its biocompatibility enhanced, so it can be used in the field of life sciences. In vitro cytotoxicity and anti-H₂O₂-induced ROS experiments proved that CoO nanozymes can protect HaCaT cells against ROS and cytotoxicity induced by H₂O₂. In addition, an atopic dermatitis (AD) mouse model was established by topical application of MC903, which verified the anti-inflammatory effect of CoO nanozymes on the AD mouse model. Traditional drugs for the treatment of AD, such as dexamethasone, have significant side-effects. The side-effects include skin burns, telangiectasias, and even serious drug dependence. CoO nano-enzymes have a low cytotoxicity and its multiple enzyme-like catalytic activities can effectively protect cells and tissues in ROS environments, which proves that CoO nano-enzymes have high application potential in the field of anti-inflammation.

A novel CuCoS nanozyme for synergistic photothermal and chemodynamic therapy of tumors

Multifunctional CuCoS nanoparticles with photothermal converters and dual enzymatic activities have been designed for the synergistic photothermal and chemodynamic therapy of tumors.

Recent advances in multifunctional nanomaterials for photothermal-enhanced Fenton-based chemodynamic tumor therapy

Photothermal (PT)-enhanced Fenton-based chemodynamic therapy (CDT) has attracted a significant amount of research attention over the last five years as a highly effective, safe, and tumor-specific nanomedicine-based therapy. CDT is a new emerging nanocatalyst-based therapeutic strategy for the in situ treatment of tumors via the Fenton reaction or Fenton-like reaction, which has got fast progress in recent years because of its high specificity and activation by endogenous substances. A variety of multifunctional nanomaterials such as metal-, metal oxide-, and metal-sulfide-based nanocatalysts have been designed and constructed to trigger the in situ Fenton or Fenton-like reaction within the tumor microenvironment (TME) to generate highly cytotoxic hydroxyl radicals (•OH), which is highly efficient for the killing of tumor cells. However, research is still required to enhance the curative outcomes and minimize its side effects. Specifically, the therapeutic efficiency of certain CDTs is still hindered by the TME, including low levels of endogenous hydrogen peroxide (H2O2), overexpression of reduced glutathione (GSH), and low catalytic efficacy of Fenton or Fenton-like reactions (pH 5.6-6.8), which makes it difficult to completely cure cancer using monotherapy. For this reason, photothermal therapy (PTT) has been utilized in combination with CDT to enhance therapeutic efficacy. More interestingly, tumor heating during PTT not only causes damage to the tumor cells but can also accelerate the generation of •OH via the Fenton and Fenton-like reactions, thus enhancing the CDT efficacy, providing more effective cancer treatment when compared with monotherapy. Currently, synergistic PT-enhanced CDT using multifunctional nanomaterials with both PT and chemodynamic properties has made enormous progress in cancer theranostics. However, there has been no comprehensive review on this subject published to date. In this review, we first summarize the recent progress in PT-enhanced Fenton-based CDT for cancer treatment. We then discuss the potential and challenges in the future development of PT-enhanced Fenton-based nanocatalytic tumor therapy for clinical application.

Clinical Trial: Magnetoplasmonic ELISA for Urine-based Active Tuberculosis Detection and Anti-Tuberculosis Therapy Monitoring

The coronavirus disease 2019 (COVID-19) pandemic has proved the importance of fast and widespread diagnostic testing to prevent serious epidemics timely. The first-line weapon against rapidly transmitted disease is a quick and massive screening test to isolate patients immediately, preventing dissemination. Here, we described magnetoplasmonic nanozymes (MagPlas NZs), i.e., hierarchically coassembled Fe₃O₄-Au superparticles, that are capable of integrating magnetic enrichment and catalytic amplification, thereby the assay can be streamlined amenable to high-throughput operation and achieve ultrahigh sensitivity. Combining this advantage with conventional enzyme-linked immunosorbent assay (ELISA), we propose a MagPlas ELISA for urine-based tuberculosis (TB) diagnosis and anti-TB therapy monitoring, which enables fast (<3 h), and highly sensitive (up to pM with naked-eyes, < 10 fM with plate reader) urinary TB antigen detection. A clinical study with a total of 297 urine samples showed robust sensitivity for pulmonary tuberculosis (85.0%) and extra-pulmonary tuberculosis (52.8%) patients with high specificity (96.7% and 96.9%). Furthermore, this methodology offers a great promise of noninvasive therapeutic response monitoring, which is impracticable in the gold-standard culture method. The MagPlas ELISA showed high sensitivity comparable to the PCR assay while retaining a simple and cheap ELISA concept, thus it could be a promising point-of-care test for TB epidemic control and possibly applied to other acute infections.

Controlled Assembly of Plasmonic Nanoparticles: From Static to Dynamic Nanostructures

The spatial arrangement of plasmonic nanoparticles can dramatically affect their interaction with electromagnetic waves, which offers an effective approach to systematically control their optical properties and manifest new phenomena. To this end, significant efforts were made to develop methodologies by which the assembly structure of metal nanoparticles can be controlled with high precision. Herein, recent advances in bottom-up chemical strategies toward the well-controlled assembly of plasmonic nanoparticles, including multicomponent and multifunctional systems are reviewed. Further, it is discussed how the progress in this area has paved the way toward the construction of smart dynamic nanostructures capable of on-demand, reversible structural changes that alter their properties in a predictable and reproducible manner. Finally, this review provides insight into the challenges, future directions, and perspectives in the field of controlled plasmonic assemblies.

Metallic oxide nanomaterials act as antioxidant nanozymes in higher plants: Trends, meta-analysis, and prospect

Improving plant resistance against various environmental stresses is crucial to gain higher agricultural productivity for meeting future food demands of the fast-growing global population. Nanozymes, nanomaterials (NMs) with enzyme-like activity, have shown the potential to defend environmental stresses via scavenging reactive oxygen species (ROS) and augmenting the inherent antioxidant functions of plants. However, several studies confirmed that NMs could cause oxidative damage triggered by excessive ROS. In this study, the conversion mechanism between antioxidant and oxidant activities of metallic oxidative nanozymes was systematically reviewed and evaluated using meta-analysis approach. Moreover, our work attempts to seek the optimal dose and physicochemical property of antioxidant-functionalized NMs and put forward future research directions. The meta-analysis results indicated that NMs at a low dose (below 20 ppm) exhibited antioxidant activity which could scavenge ROS and alleviate their deleterious impacts. Conversely, their oxidant activity was activated at the exposure dose above 200 ppm which might induce ROS overproduction and lead to oxidative stress. Further, root exposure tends to stimulate the oxidant activity of NMs, and the NMs modification is highly promising for improving their bioavailability. A SWOT analysis was conducted to evaluate the strengths, weaknesses, opportunities, and threats of agro-applied nanozymes. Therefore, the rational design and development of nanozymes for better antioxidant potential will be beneficial to their applications in agriculture.

Low dimensional materials for glucose sensing

Biosensors are essential components for effective healthcare management. Since biological processes occur on molecular scales, nanomaterials and nanosensors intrinsically provide the most appropriate landscapes for developing biosensors. Low-dimensional materials have the advantage of offering high surface areas, increased reactivity and unique physicochemical properties for efficient and selective biosensing. So far, nanomaterials and nanodevices have offered significant prospects for glucose sensing. Targeted glucose biosensing using such low-dimensional materials enables much more effective monitoring of blood glucose levels, thus providing significantly better predictive diabetes diagnostics and management. In this review, recent advances in using low dimensional materials for sensing glucose are summarized. Sensing fundamentals are discussed, as well as invasive, minimally-invasive and non-invasive sensing methods. The effects of morphological characteristics and size-dependent properties of low dimensional materials are explored for glucose sensing, and the key performance parameters such as selectivity, stability and sensitivity are also discussed. Finally, the challenges and future opportunities that low dimensional materials can offer for glucose sensing are outlined.

Tailoring metal-organic frameworks-based nanozymes for bacterial theranostics

Nanozymes are next-generation artificial enzymes having distinguished features such as cost-effective, enhanced surface area, and high stability. However, limited selectivity and moderate activity of nanozymes in the biochemical environment hindered their usage and encouraged researchers to seek alternative catalytic materials. Recently, metal-organic frameworks (MOFs) characterized by distinct crystalline porous structures with large surface area, tunable pores, and uniformly dispersed active sites emerged, that filled the gap between natural enzymes and nanozymes. Moreover, by selecting suitable metal ions and organic linkers, MOFs can be designed for effective bacterial theranostics. In this review, we briefly presented the design and fabrication of MOFs. Then, we demonstrated the applications of MOFs in bacterial theranostics and their safety considerations. Finally, we proposed the major obstacles and opportunities for further development in research on the interface of nanozymes and MOFs. We expect that MOFs based nanozymes with unique physicochemical and intrinsic enzyme-mimicking properties will gain broad interest in both fundamental research and biomedical applications.

Nano-SAR Modeling for Predicting the Cytotoxicity of Metal Oxide Nanoparticles to PaCa2

Nowadays, the impact of engineered nanoparticles (NPs) on human health and environment has aroused widespread attention. It is essential to assess and predict the biological activity, toxicity, and physicochemical properties of NPs. Computation-based methods have been developed to be efficient alternatives for understanding the negative effects of nanoparticles on the environment and human health. Here, a classification-based structure-activity relationship model for nanoparticles (nano-SAR) was developed to predict the cellular uptake of 109 functionalized magneto-fluorescent nanoparticles to pancreatic cancer cells (PaCa2). The norm index descriptors were employed for describing the structure characteristics of the involved nanoparticles. The Random forest algorithm (RF), combining with the Recursive Feature Elimination (RFE) was employed to develop the nano-SAR model. The resulted model showed satisfactory statistical performance, with the accuracy (ACC) of the test set and the training set of 0.950 and 0.966, respectively, demonstrating that the model had satisfactory classification effect. The model was rigorously verified and further extensively compared with models in the literature. The proposed model could be reasonably expected to predict the cellular uptakes of nanoparticles and provide some guidance for the design and manufacture of safer nanomaterials.

Nanozymes go oral: nanocatalytic medicine facilitates dental health

Nanozymes are multi-functional nanomaterials with enzyme-like activity, which rapidly won a place in biomedicine due to their number of nanocatalytic materials types and applications. Yan and Gao first discovered horseradish peroxidase-like activity in ferromagnetic nanoparticles in 2007. With the joint efforts of many scientists, a new concept-nanocatalytic medicine-is emerging. Nanozymes overcome the inherent disadvantages of natural enzymes, such as poor environmental stability, high production costs, difficult storage and so on. Their progress in dentistry is following the advancement of materials science. The oral research and application of nanozymes is becoming a new branch of nanocatalytic medicine. In order to highlight the great contribution of nanozymes facilitating dental health, we first review the overall research progress of multi-functional nanozymes in oral related diseases, including treating dental caries, dental pulp diseases, oral ulcers and peri-implantitis; the monitoring of oral cancer, oral bacteria and ions; and the regeneration of soft and hard tissue. Additionally, we also propose the challenges remaining for nanozymes in terms of their research and application, and mention future concerns. We believe that the new catalytic nanomaterials will play important roles in dentistry in the future.

Superparamagnetic nanoparticles for biomedical applications

In this review, we summarized recent advances in the development and biological applications of polymeric nanoparticles embedded with superparamagnetic iron oxide nanoparticles (SPIONs). Superparamagnetic polymeric nanoparticles include core-shell nanoparticles, superparamagnetic polymeric micelles and superparamagnetic polymersomes. They have potential for various biomedical applications, including magnetic resonance imaging (MRI) contrast agents, drug delivery, detection of bacteria, viruses and proteins, etc. Finally, the challenges in the design and preparation of superparamagnetic nanoparticles towards clinical applications are explored and the prospects in this field are proposed.

Recent advances in visual detection for cancer biomarkers and infectious pathogens

It is an urgency to detect infectious pathogens or cancer biomarkers using rapid, simple, convenient and cost-effective methods in complex biological samples. Many existing approaches (traditional virus culture, ELISA or PCR) for the pathogen and biomarker assays face several challenges in the clinical applications that require lengthy time, sophisticated sample pre-treatment and expensive instruments. Due to the simple and rapid detection manner as well as no requirement of expensive equipment, many visual detection methods have been considered to resolve the aforementioned problems. Meanwhile, various new materials and colorimetric/fluorescent methods have been tried to construct new biosensors for infectious pathogens and biomarkers. However, the recent progress of these aspects is rarely reviewed, especially in terms of integration of new materials, microdevice and detection mechanism into the visual detection systems. Herein, we provide a broad field of view to discuss the recent progress in the visual detection of infectious pathogens and cancer biomarkers along with the detection mechanism, new materials, novel detection methods, special targets as well as multi-functional microdevices and systems. The novel visual approaches for the infectious pathogens and biomarkers, such as bioluminescence resonance energy transfer (BRET), metal-induced metallization and clustered regularly interspaced short palindromic repeats (CRISPR)-based biosensors, are discussed. Additionally, recent advancements in visual assays utilizing various new materials for proteins, nucleic acids, viruses, exosomes and small molecules are comprehensively reviewed. Future perspectives on the visual sensing systems for infectious pathogens and cancers are also proposed.

Recent Advances in Hyperthermia Therapy-Based Synergistic Immunotherapy

The past decades have witnessed hyperthermia therapy (HTT) as an emerging strategy against malignant tumors. Nanomaterial-based photothermal therapy (PTT) and magnetic hyperthermia (MHT), as highly effective and noninvasive treatment models, offer advantages over other strategies in the treatment of different types of tumors. However, both PTT and MHT cannot completely cure cancer due to recurrence and distal metastasis. In recent years, cancer immunotherapy has attracted widespread attention owing to its capability to activate the body's own natural defense to identify, attack, and eradicate cancer cells. Significant efforts have been devoted to studying the activated immune responses caused by hyperthermia-ablated tumors. In this article, the synergistic mechanism of HTT in immunotherapy, including immunogenic cell death and reversal of the immunosuppressive tumor microenvironment is discussed. The reports of the combination of HTT or HTT-based multimodal therapy with immunotherapy, including immunoadjuvant exploitation, immune checkpoint blockade therapy, and adoptive cellular immunotherapy are summarized. As highlighted, these strategies could achieve synergistically enhanced therapeutic outcomes against both primary tumors and metastatic lesions, prevent cancer recurrence, and prolong the survival period. Finally, current challenges and prospective developments in HTT-synergized immunotherapy are also reviewed.

Metal-Organic-Framework-Engineered Enzyme-Mimetic Catalysts

Nanomaterial-based enzyme-mimetic catalysts (Enz-Cats) have received considerable attention because of their optimized and enhanced catalytic performances and selectivities in diverse physiological environments compared with natural enzymes. Recently, owing to their molecular/atomic-level catalytic centers, high porosity, large surface area, high loading capacity, and homogeneous structure, metal-organic frameworks (MOFs) have emerged as one of the most promising materials in engineering Enz-Cats. Here, the recent advances in the design of MOF-engineered Enz-Cats, including their preparation methods, composite constructions, structural characterizations, and biomedical applications, are highlighted and commented upon. In particular, the performance, selectivities, essential mechanisms, and potential structure-property relations of these MOF-engineered Enz-Cats in accelerating catalytic reactions are discussed. Some potential biomedical applications of these MOF-engineered Enz-Cats are also breifly proposed. These applications include, for example, tumor therapies, bacterial disinfection, tissue regeneration, and biosensors. Finally, the future opportunities and challenges in emerging research frontiers are thoroughly discussed. Thereby, potential pathways and perspectives for designing future state-of-the-art Enz-Cats in biomedical sciences are offered.

Regulation of the Peroxidase-Like Activity of nGO, MoS2 and WS2 Nanozymes by Using Metal Cations

Two dimensional nanoparticles (2D-NPs) along with other nanoscale materials have been deemed to be the next generation of artificial enzymes (nanozymes). The low-cost bulk-scale production, ease of storage and modification of such nanomaterials have given nanozymes an advantage over traditional enzymes. Many studies have been aimed at developing methods to increase the performance of these nanozymes, and also identify interfering agents. To investigate the interference of a number of metal cations, we studied the effect of Ti²⁺ , Fe²⁺ , Ag⁺ , Hg²⁺ , Co²⁺ , Cu²⁺ , Ni²⁺ , Pb²⁺ , Ca²⁺ , Zn²⁺ and Mn²⁺ in a nanozyme assays of 2D-NPs using ABTS radical formation. Ti²⁺ , Co²⁺ , Cu²⁺ , Ni²⁺ , Ca²⁺ , Zn²⁺ and Mn²⁺ ions did not display any notable effect on the peroxidase-like activity of nGO, MoS₂ and WS₂ 2D-NPs. However, Fe²⁺ , Ag⁺ , Hg²⁺ and Pb²⁺ ions' effects on the overall ABTS reaction were significant enough to be visualised by partial least square discriminant analysis (PLSDA). We report that, similar to that of many natural enzymes, the nanozyme activity of 2D-NPs is regulated by a number of metal cations allowing their identification and discrimination by using a statistical analysis tool.

GSH-Depleted Nanozymes with Hyperthermia-Enhanced Dual Enzyme-Mimic Activities for Tumor Nanocatalytic Therapy

Nanocatalytic therapy, using artificial nanoscale enzyme mimics (nanozymes), is an emerging technology for therapeutic treatment of various malignant tumors. However, the relatively deficient catalytic activity of nanozymes in the tumor microenvironment (TME) restrains their biomedical applications. Here, a versatile and bacteria-like PEG/Ce-Bi@DMSN nanozyme is developed by coating uniform Bi₂ S₃ nanorods (NRs) with dendritic mesoporous silica (Bi₂ S₃ @DMSN) and then decorating ultrasmall ceria nanozymes into the large mesopores of Bi₂ S₃ @DMSN. The nanozymes exhibit dual enzyme-mimic catalytic activities (peroxidase-mimic and catalase-mimic) under acidic conditions that can regulate the TME, that is, simultaneously elevate oxidative stress and relieve hypoxia. In addition, the nanozymes can effectively consume the overexpressed glutathione (GSH) through redox reaction. Photothermal therapy (PTT) is introduced to synergistically improve the dual enzyme-mimicking catalytic activities and depletion of the overexpressed GSH in the tumors by photonic hyperthermia. This is achieved by taking advantage of the desirable light absorbance in the second near-infrared (NIR-II) window of the PEG/Ce-Bi@DMSN nanozymes. Subsequently the reactive oxygen species (ROS)-mediated therapeutic efficiency is significantly improved. Therefore, this study provides a proof of concept of hyperthermia-augmented multi-enzymatic activities of nanozymes for tumor ablation.

Bifunctional MIL-53(Fe) with pyrophosphate-mediated peroxidase-like activity and oxidation-stimulated fluorescence switching for alkaline phosphatase detection

Alkaline phosphatase (ALP) is extensively used as a clinical biomarker because of its close relevance with a variety of diseases. Thus, exploring reliable and practical methods for ALP analysis is of great significance. In the present work, we explored MIL-53(Fe) as a bifunctional platform with pyrophosphate (PPi)-mediated peroxidase-like activity and oxidation-stimulated fluorescence switching for ALP sensing. The proposed MIL-53(Fe) could exhibit favorable peroxidase-mimicking activity to catalytically decompose H2O2 to hydroxyl radicals, which had strong oxidizing ability to oxidize the terephthalic acid bridging ligand, resulting in the oxidation-stimulated turn-on fluorescence of MIL-53(Fe) itself. Due to the strong coordination interaction between PPi and Fe3+, the former with a relatively large molecular structure was able to inhibit the catalytic activity of MIL-53(Fe) via capping active Fe3+ sites, leading to the suppression of its self-fluorescence response. When ALP was present, it could hydrolyze the PPi inhibitor and restore the dual functions of MIL-53(Fe) to provide fluorescence again. With the above principle, highly sensitive and selective determination of ALP with a linear scope of 2-80 U L-1 and a detection limit down to 0.7 U L-1 was achieved. The MIL-53(Fe) was also demonstrated to be very reliable in measuring the target in human serum, indicating its great promise as an integrated tool for ALP detection in clinical practice.

Atomic engineering of single-atom nanozymes for enzyme-like catalysis

Enzyme mimics, especially nanozymes, play a crucial role in replacing natural enzymes for diverse applications related to bioanalysis, therapeutics and other enzyme-like catalysis. Nanozymes are catalytic nanomaterials with enzyme-like properties, which currently face formidable challenges with respect to their intricate structure, properties and mechanism in comparison with enzymes. The latest emergence of single-atom nanozymes (SAzymes) undoubtedly promoted the nanozyme technologies to the atomic level and provided new opportunities to break through their inherent limitations. In this perspective, we discuss key aspects of SAzymes, including the advantages of the single-site structure, and the derived synergetic enhancements of enzyme-like activity, catalytic selectivity and the mechanism, as well as the superiority in biological and catalytic applications, and then highlight challenges that SAzymes face and provide relevant guidelines from our point of view for the rational design and extensive applications of SAzymes, so that SAzyme may achieve its full potential as the next-generation nanozyme.

The cytotoxicity of nanomaterials: Modeling multiple human cells uptake of functionalized magneto-fluorescent nanoparticles via nano-QSAR

The vast majority of nanomaterials have attracted an upsurge of interest since their discovery and considerable researches are being carried out about their adverse outcomes for human health and the environment. In this study, two regression-based quantitative structure-activity relationship models for nanoparticles (nano-QSAR) were established to predict the cellular uptakes of 109 functionalized magneto-fluorescent nanoparticles to pancreatic cancer cells (PaCa2) and human umbilical vein endothelial cells (HUVEC) lines, respectively. The improved SMILES-based optimal descriptors encoded with certain easily available physicochemical properties were proposed to describe the molecular structure characteristics of the involved nanoparticles, and the Monte Carlo method was used for calculating the improved SMILES-based optimal descriptors. Both developed nano-QSAR models for cellular uptake prediction provided satisfactory statistical results, with the squared correlation coefficient (R²) being 0.852 and 0.905 for training sets, and 0.822 and 0.885 for test sets, respectively. Both models were rigorously validated and further extensively compared to literature models. Predominant physicochemical features responsible for cellular uptake were identified by model interpretation. The proposed models could be reasonably expected to provide guidance for synthesizing or choosing safer, more suitable surface modifiers of desired properties prior to their biomedical applications.

Nanozyme-based electrochemical biosensors for disease biomarker detection

In recent years, a new group of nanomaterials named nanozymes that exhibit enzyme-mimicking catalytic activity has emerged as a promising alternative to natural enzymes. Nanozymes can address some of the intrinsic limitations of natural enzymes such as high cost, low stability, difficulty in storage, and specific working conditions (i.e., narrow substrate, temperature and pH ranges). Thus, synthesis and applications of hybrid and stimuli-responsive advanced nanozymes could revolutionize the current practice in life sciences and biosensor applications. On the other hand, electrochemical biosensors have long been used as an efficient way for quantitative detection of analytes (biomarkers) of interest. As such, the use of nanozymes in electrochemical biosensors is particularly important to achieve low cost and stable biosensors for prognostics, diagnostics, and therapeutic monitoring of diseases. Herein, we summarize the recent advances in the synthesis and classification of common nanozymes and their application in electrochemical biosensor development. After briefly overviewing the applications of nanozymes in non-electrochemical-based biomolecular sensing systems, we thoroughly discuss the state-of-the-art advances in nanozyme-based electrochemical biosensors, including genosensors, immunosensors, cytosensors and aptasensors. The applications of nanozymes in microfluidic-based assays are also discussed separately. We also highlight the challenges of nanozyme-based electrochemical biosensors and provide some possible strategies to address these limitations. Finally, future perspectives on the development of nanozyme-based electrochemical biosensors for disease biomarker detection are presented. We envisage that standardization of nanozymes and their fabrication process may bring a paradigm shift in biomolecular sensing by fabricating highly specific, multi-enzyme mimicking nanozymes for highly sensitive, selective, and low-biofouling electrochemical biosensors.

Au2Pt-PEG-Ce6 nanoformulation with dual nanozyme activities for synergistic chemodynamic therapy / phototherapy

Although synergistic therapy for tumors has displayed significant promise for effective treatment of cancer, developing a simple and effective strategy to build a multi-functional nanoplatform is still a huge challenge. By virtue of the characteristics of tumor microenvironment, such as hypoxia, slight acidity and H₂O₂ overexpression, Au₂Pt-PEG-Ce6 nanoformulation is constructed for collaborative chemodynamic/phototherapy of tumors. Specifically, the Au₂Pt nanozymes with multiple functions are synthesized in one step at room temperature. The photosensitizer chlorin e6 (Ce6) is covalently linked to Au₂Pt nanozymes for photodynamic therapy (PDT). Interestingly, the Au₂Pt nanozymes possess catalase- and peroxidase-like activities simultaneously, which not only can generate O₂ for relaxation of tumor hypoxia and enhancement of PDT efficiency but also can produce ∙OH for chemodynamic therapy (CDT). In addition, the high photothermal conversion efficiency (η = 31.5%) of Au₂Pt-PEG-Ce6 nanoformulation provides the possibility for photoacoustic (PA) and photothermal (PT) imaging guided photothermal therapy (PTT). Moreover, the presence of high-Z elements (Au and Pt) in Au₂Pt-PEG-Ce6 nanoformulation endows it with the ability to act as an X-ray computed tomography (CT) imaging contrast agent. All in all, the Au₂Pt-PEG-Ce6 exhibits great potential in multimodal imaging-guided synergistic PTT/PDT/CDT with remarkably tumor specificity and enhanced therapy.

Point-of-care assay for drunken driving with Pd@Pt core-shell nanoparticles-decorated ploy(vinyl alcohol) aerogel assisted by portable pressure meter

Alcohol abuse causes health problems and security accidents. A reliable and sensitive detection system for alcohol has been an instinctive demand in law enforcement and forensic. More efforts are demanded in developing new sensing strategy preferably with portable and non-invasive traits for the pushforward of point-of-care (POC) device popularization.

Methods: We developed a POC diagnosis system for alcohol assay with the aid of alcohol oxidase (AOX) pre-joining in the system as well as Pd@Pt core-shell nanoparticles (abbreviated to Pd@Pt) that were decorated on ploy(vinyl alcohol) aerogel with amphiphilicity. Biological samples like saliva and whole blood can be absorbed by the aerogel in a quick process, in which the analyte would go through a transformation from alcohol, H₂O₂, to a final production of O₂, causing an analyte dose-dependent signal change in the commercial portable pressure meter. The cascade reactions are readily catalyzed by AOX and Pd@Pt, of which the latter one possesses excellent peroxidase-like activity.

Results: Our design has smartness embodied in the aerogel circumvents the interference from methanol which is more ready to be catalyzed by AOX. Under the optimal conditions, the limit of detection for alcohol was 0.50 mM in saliva, and is able to distinguish the driving under the influence (DUI) (1.74 mM in saliva) and driving while impaired (DWI) (6.95 mM in saliva) in the national standard of China.

Conclusion: Our proof-of-concept study provides the possibility for the establishment of POC device for alcohol and other target detection, not only owing to the sensing qualification but also thanks to the architecture of such sensor that has great flexibility by replacing the AOX with glucose oxidase (GOX), thenceforth realizing the accurate detection of glucose in 0.5% whole blood sample. With the advantages of easy accessibility and anti-interference ability, our sensor exhibits great potential for quantitative diagnostics in biological system.

Ultrasonic synthesis of nano-PrO1.8 as nanozyme for colorimetric determination of trans-resveratrol

In this study, nano-PrO1.8 were synthesized successfully in ionic liquids (ILs) as template assisted ultrasonic irradiation method. Various precipitating agents and different types of ILs were investigated to determine their respective effects on the morphology of the end products. Using hydrazine hydrate as a precipitating agent and 1-carboxymethyl-3-methylimidazolium chloride as a template, spherical structure with an average diameter of 250 nm was obtained. It is worth noting that the prepared material exhibits high peroxidase-like activity and weak oxidase activity. Then, the catalytic oxidation capacity of the nano-PrO1.8 was evaluated by the peroxidase substrate 3,3',5,5'-tetramethylbenzidine (TMB). The colorless of TMB can be converted into blue oxidized TMB (oxTMB) in the presence of nano-PrO1.8, but trans-resveratrol inhibited its peroxidase-like activity and weakened the blue color. Hence, we developed a sensitive, selective and simple colorimetric method for trans-resveratrol detection using nano-PrO1.8 as peroxidase-like enzyme. A linear relationship was found in the range of 0.30 µM-16 µM trans-resveratrol with the detection limit of 0.29 µM. Satisfactory results were achieved when the method was submitted to the determination of trans-resveratrol in white wine samples.

Dual responsive magnetic Fe3O4-TiO2/graphene nanocomposite as an artificial nanozyme for the colorimetric detection and photodegradation of pesticide in an aqueous medium

The Fe₃O₄-TiO₂/reduced graphene oxide (Fe₃O₄-TiO₂/rGO) nanocomposite was successfully prepared by one step hydrothermal method and exhibit intrinsic peroxidase mimic activity and photocatalytic efficiency. The as-prepared nanomaterials were characterized by several analytical tools including XRD, HRTEM, FESEM, XPS, VSM, FT-IR, AFM, TGA and zeta potential analysis. The average particle size of Fe₃O₄ and TiO₂ NPs on the rGO nanosheets are found to be 9 ± 0.2 nm. The synthesized nanocomposite showed dual responsive including highly sensitive colorimetric detection of harmful atrazine pesticide in an aqueous medium as well as photocatalytic degradation of atrazine pesticide. The Fe₃O₄-TiO₂/rGO nanocomposite showed the efficient peroxidase-like catalytic activity throughout the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) as a peroxidase substrate to the blue-colored oxidized product (ox-TMB) in presence of H₂O₂. Based on this observation, the colorimetric detection technique is applied for the sensing of atrazine as model pesticides using TMB as a peroxidase substrate molecule and 2.98 μg/L of the limit of detection (LOD) was obtained in the linear range of 2-20 μg/L. Thus the proposed colorimetric sensing technique is simple and low cost for the real-time monitoring of the pesticides in an aqueous medium. Further, the Fe₃O₄-TiO₂/rGO nanocomposite was also successfully utilized towards efficient photocatalytic degradation of atrazine molecule (100 %) under irradiation of natural sunlight. Moreover, Fe₃O₄-TiO₂/rGO nanocomposite was successfully recycled for 10 times without a significant loss of its photocatalytic efficiency. This work delivers a new insight for the dual responsive of the Fe₃O₄-TiO₂/rGO nanocomposite as an artificial nanozyme for colorimetric sensing of the water pollutant and also removal of the water pollutant by simple photocatalytic degradation method under natural sunlight irradiation.