Fabrication and application of BN nanoparticles, nanosheets and their nanohybrids

The Synthesis of Three-Dimensional Hexagonal Boron Nitride as the Reinforcing Phase of Polymer-Based Electrolyte for All-Solid-State Li Metal Batteries

Powdery hexagonal boron nitride (h-BN), as an important material for electrochemical energy storage, has been typically synthesized in bulk and one/two-dimensional (1/2D) nanostructured morphologies. However, until now, no method has been developed to synthesize powdery three-dimensional (3D) h-BN. This work introduces a novel NaCl-glucose-assisted strategy to synthesize micron-sized 3D h-BN with a honeycomb-like structure and its proposed formation mechanism. We propose that NaCl acts as the template of 3D structure and promotes the nitridation reaction by adsorbing NH3 . Glucose facilitates the homogeneous coating of boric acid onto the NaCl surface via functionalizing the NaCl surface. During the nitridation reaction, boron oxides (BO4 and BO3 ) form from a dehydration reaction of boric acid, which is then reduced to O2 -B-N and O-B-N2 intermediates before finally being reduced to BN3 by NH3 . When incorporated into polyethylene oxide-based electrolytes for Li metal batteries, 5 wt % of 3D h-BN significantly enhances ionic conductivity and mechanical strength. Consequently, this composite electrolyte demonstrates superior electrochemical stability. It delivers 300 h of stable cycles in the Li//Li cell at 0.1 mA cm-2 and retains 89 % of discharge capacity (138.9 mAh g-1 ) after 100 cycles at 1 C in the LFP//Li full cell.

The Structure of Boron Monoxide

Boron monoxide (BO), prepared by the thermal condensation of tetrahydroxydiboron, was first reported in 1955; however, its structure could not be determined. With the recent attention on boron-based two-dimensional materials, such as borophene and hexagonal boron nitride, there is renewed interest in BO. A large number of stable BO structures have been computationally identified, but none are supported by experiments. The consensus is that the material likely forms a boroxine-based two-dimensional material. Herein, we apply advanced 11B NMR experiments to determine the relative orientations of B(B)O2 centers in BO. We find that the material is composed of D2h-symmetric O2B-BO2 units that organize to form larger B4O2 rings. Further, powder diffraction experiments additionally reveal that these units organize to form two-dimensional layers with a random stacking pattern. This observation is in agreement with earlier density functional theory (DFT) studies that showed B4O2-based structures to be the most stable.

Efficient and Reusable Sorbents Based on Nanostructured BN Coatings for Water Treatment from Antibiotics

Increasing contamination of wastewater with antibiotics used in agriculture, animal husbandry, and medicine is a serious problem for all living things. To address this important issue, we have developed an efficient platform based on a high specific surface area hexagonal boron nitride (BN) coating formed by numerous nanopetals and nanoneedles. The maximum sorption capacity of 1 × 1 cm² BN coatings is 502.78 µg/g (tetracycline, TET), 315.75 µg/g (ciprofloxacin, CIP), 400.17 µg/g (amoxicillin, AMOX), and 269.7 µg/g (amphotericin B, AMP), which exceeds the sorption capacity of many known materials. Unlike nanoparticles, BN-coated Si wafers are easy to place in and remove from antibiotic-contaminated aqueous solutions, and are easy to clean. When reusing the adsorbents, 100% efficiency was observed at the same time intervals as in the first cleaning cycle: 7 days (TET) and 14 days (CIP, AMOX, AMP) at 10 µg/mL, 14 days (TET, CIP, and AMOX) and 28 days (AMP) at 50 µg/mL, and 14 days (TET) and 28 days (CIP, AMOX and AMP) at 100 µg/mL. The results obtained showed that TET and CIP are best adsorbed on the surface of BN, so TET was chosen as an example for further theoretical modeling of the sorption process. It was found that adsorption is the main mechanism, and this process is spontaneous and endothermic. This highlights the importance of a high specific surface area for the efficient removal of antibiotics from aqueous solutions.

Recent Progress in Fabrication and Application of BN Nanostructures and BN-Based Nanohybrids

Due to its unique physical, chemical, and mechanical properties, such as a low specific density, large specific surface area, excellent thermal stability, oxidation resistance, low friction, good dispersion stability, enhanced adsorbing capacity, large interlayer shear force, and wide bandgap, hexagonal boron nitride (h-BN) nanostructures are of great interest in many fields. These include, but are not limited to, (i) heterogeneous catalysts, (ii) promising nanocarriers for targeted drug delivery to tumor cells and nanoparticles containing therapeutic agents to fight bacterial and fungal infections, (iii) reinforcing phases in metal, ceramics, and polymer matrix composites, (iv) additives to liquid lubricants, (v) substrates for surface enhanced Raman spectroscopy, (vi) agents for boron neutron capture therapy, (vii) water purifiers, (viii) gas and biological sensors, and (ix) quantum dots, single photon emitters, and heterostructures for electronic, plasmonic, optical, optoelectronic, semiconductor, and magnetic devices. All of these areas are developing rapidly. Thus, the goal of this review is to analyze the critical mass of knowledge and the current state-of-the-art in the field of BN-based nanomaterial fabrication and application based on their amazing properties.

Polyaromatic cores for the exfoliation of popular 2D materials

Two-dimensional (2D) nanomaterials have attracted interest from the scientific community due to their unique properties. The production of these materials has been carried out by diverse methodologies, the liquid phase exfoliation being the most promising one due to its simplicity and potential scalability. The use of several stabilizers allows to obtain dispersions of these 2D nanomaterials in solvents with low boiling points. Herein we describe a general exfoliation method for different 2D materials employing a biphasic water/dichloromethane system and two different (poly)aromatic hydrocarbons (PAHs). This method allows us to obtain dispersions of the exfoliated 2D materials with high concentrations in the organic solvent. Due to the low boiling point of dichloromethane, and therefore its easy removal, the obtained dispersions can be employed as additives for different composites. We corroborate that the exfoliation efficiency is improved due to the π-π and van der Waals interactions between the PAHs and the layers of the 2D materials.

Nickel foam supported porous copper oxide catalysts with noble metal-like activity for aqueous phase reactions

Contiguous metal foams offer a multitude of advantages over conventional powders as supports for nanostructured heterogeneous catalysts; most critically a preformed 3-D porous framework ensuring full directional coverage of supported catalyst, and intrinsic ease of handling and recyclability. Nonetheless, metal foams remain comparatively underused in thermal catalysis compared to more conventional supports such as amorphous carbon, metal oxides, zeolites and more recently MOFs. Herein, we demonstrate a facile preparation of highly-reactive, robust, and easy to handle Ni foam-supported Cu-based metal catalysts. The highly sustainable synthesis requires no specialized equipment, no surfactants or additive redox reagents, uses water as solvent, and CuCl2(H2O)2 as precursor. The resulting material seeds as well-separated micro-crystalline Cu2(OH)3Cl evenly covering the Ni foam. Calcination above 400 °C transforms the Cu2(OH)3Cl to highly porous CuO. All materials display promising activity towards the reduction of 4-nitrophenol and methyl orange. Notably, our leading CuO-based material displays 4-nitrophenol reduction activity comparable with very reactive precious-metal based systems. Recyclability studies highlight the intrinsic ease of handling for the Ni foam support, and our results point to a very robust, highly recyclable catalyst system.

Structures and Electromagnetic Properties of Boron Nitride Nanoribbons Doped with Transition Metals

Inspired by the recent discovery of the Ti-doped BN nanocages, here we report the design of novel BN nanoribbons (BNNRs) doped with fourth-row transition metals (Sc-Cu) and the prediction of their structural and electromagnetic properties. First-principles calculations and ab initio molecular dynamics simulations show that Ti-doped BNNR possesses both thermodynamic and kinetic stability at high temperatures for synthesis of BN materials. Metal doping may make the nonmagnetic pristine BNNR ferromagnetic or antiferromagnetic, depending on the metal. The doping with all considered metals reduces substantially the band gap of pristine BNNR. For example, Sc-doped BNNR is ferromagnetic with an indirect band gap of 1.18 eV, while V-doped nanoribbon is antiferromagnetic with a direct gap of 2.50 eV. Remarkably, the carrier mobility in both materials is significantly enhanced compared to the pristine BNNR. Our findings suggest that doping with different metals may endow BNNRs with versatile electronic and magnetic properties.

Nanotechnology in Plant Metabolite Improvement and in Animal Welfare

Plant tissue culture plays an important role in plant biotechnology due to its potential for massive production of improved crop varieties and high yield of important secondary metabolites. Several efforts have been made to ameliorate the effectiveness and production of plant tissue culture, using biotic and abiotic factors. Nowadays, the addition of nanoparticles as elicitors has, for instance, gained worldwide interest because of its success in microbial decontamination and enhancement of secondary metabolites. Nanoparticles are entities in the nanometric dimension range: they possess unique physicochemical properties. Among all nanoparticles, silver-nanoparticles (AgNPs) are well-known for their antimicrobial and hormetic effects, which in appropriate doses, led to the improvement of plant biomass as well as secondary metabolite accumulation. This review is focused on the evaluation of the integration of nanotechnology with plant tissue culture. The highlight is especially conveyed on secondary metabolite enhancement, effects on plant growth and biomass accumulation as well as their possible mechanism of action. In addition, some perspectives of the use of nanomaterials as potential therapeutic agents are also discussed. Thus, the information provided will be a good tool for future research in plant improvement and the large-scale production of important secondary metabolites. Elicitation of silver-nanoparticles, as well as nanomaterials, function as therapeutic agents for animal well-being is expected to play a major role in the process. However, nanosized supramolecular aggregates have received an increased resonance also in other fields of application such as animal welfare. Therefore, the concluding section of this contribution is dedicated to the description and possible potential and usage of different nanoparticles that have been the object of work and expertise also in our laboratories.

Enhanced catalysis through structurally modified hybrid 2-D boron nitride nanosheets comprising of complexed 2-hydroxy-4-methoxybenzophenone motif

Tuning the structural architecture of the pristine two dimensional hexagonal boron nitride (h-BN) nanosheets through rational surface engineering have proven advantageous in the fabrication of competent catalytic materials. Inspired by the performance of h-BN based nanomaterials in expediting key organic transformations, we channelized our research efforts towards engineering the inherent surface properties of the exclusively stacked h-BN nanosheets through the incorporation of a novel competent copper complex of a bidentate chelating ligand 2-hydroxy-4-methoxybenzophenone (BP). Delightfully, this hybrid nanomaterial worked exceptionally well in boosting the [3 + 2] cycloaddition reaction of azide and nitriles, providing a facile access to a diverse variety of highly bioactive tetrazole motifs. A deep insight into the morphology of the covalently crafted h-BN signified the structural integrity of the exfoliated h-BN@OH nanosheets that exhibited lamellar like structures possessing smooth edges and flat surface. This interesting morphology could also be envisioned to augment the catalysis by allowing the desired surface area for the reactants and thus tailoring their activity. The work paves the way towards rational design of h-BN based nanomaterials and adjusting their catalytic potential by the use of suitable complexes for promoting sustainable catalysis, especially in view of the fact that till date only a very few h-BN nanosheets based catalysts have been devised.

Marine organisms: Pioneer natural sources of polysaccharides/proteins for green synthesis of nanoparticles and their potential applications

Current innovations in the marine bionanotechnology arena are supporting and stimulating developments in other fields, including nanomedicine, pharmaceuticals, sensors, environmental trends, food, and agriculture aspects. Many oceanic creatures, particularly algae, plants, bacteria, yeast, fungi, cyanobacteria, actinomyces, invertebrates, animals and sponges can survive under extreme circumstances. They can biogenerate a broad spectrum of phytochemicals/metabolites, including proteins, peptides, alkaloids, flavonoids, polyphenols, carbohydrate polymers, polysaccharides, sulfated polysaccharides, polysaccharide-protein complexes such as carrageenan, fucoidanase, fucoidan, carboxymethyl cellulose, poly-γ-glutamic acid, sugar residues with proteins, melanin, haemocyanin, etc). These products exhibit exclusive advantages that offer pioneering roles in the eco-friendly fabrication of several nanoparticles (NPs) i.e., Ag, Au, Ru, Fe₂O₃, Cobalt (III) Oxide (Co₂O₃), ZnO and Ag@AgCl within a single phase. Importantly, marine organisms can biosynthesize NPs in two modes, namely extracellular and intracellular. Biosynthesized NPs can be characterized using various methodologies among them, ultraviolet-visible spectroscopy, fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Taken together, this review focuses on the green synthesis of metallic, metallic oxides and nonmetallic NPs utilizing extracts/derivatives from marine organisms based on eco-friendly green biogenic procedures. Moreover, significant attention is given to the medicinal and industrial importance of such marine organisms mediated NPs.

Advances in Studies of Boron Nitride Nanosheets and Nanocomposites for Thermal Transport and Related Applications

Hexagonal boron nitride (h-BN) and exfoliated nanosheets (BNNs) not only resemble their carbon counterparts graphite and graphene nanosheets in structural configurations and many excellent materials characteristics, especially the ultra-high thermal conductivity, but also offer other unique properties such as being electrically insulating and extreme chemical stability and oxidation resistance even at elevated temperatures. In fact, BNNs as a special class of 2-D nanomaterials have been widely pursued for technological applications that are beyond the reach of their carbon counterparts. Highlighted in this article are significant recent advances in the development of more effective and efficient exfoliation techniques for high-quality BNNs, the understanding of their characteristic properties, and the use of BNNs in polymeric nanocomposites for thermally conductive yet electrically insulating materials and systems. Major challenges and opportunities for further advances in the relevant research field are also discussed.

Construction of Metal Hydrate-Based Amorphous Magnetic Nanosheets for Enhanced Protein Enrichment and Immobilization

Inspired by the hierarchical fabrication technique, many self-assembly procedures have improved the construction of nanomaterials with unique physicochemical characteristics and multiple functions. The generation of multiple complexes is always accompanied by hierarchical structures and intriguing properties that are distinct from their individual segments. An interesting composite is amorphous magnetic Zn-Zr phosphate hydrated nanosheets (Zn-Zr APHNs), generated using templated synthesis and nanoparticle codeposition. The special porous structure of this construct, together with the abundance of metal ions and hydrate present, endows it with many interaction sites for proteins, provides high loading efficiency, and enhances bioactivity. Then, a series of proteins, including enzymes, was immobilized by the Zn-Zr APHNs by multiple interactions, high ionization, and larger surface of the nanosheets. In this study, novel methods for the enrichment of bioactive proteins while retaining the activity of protein payloads are presented. As a verification method, it is indicated that the Zn-Zr APHNs can deliver enzyme proteins (i.e., Cyt-c) to increase the catalytic activity with their biological function and structural integrity, resulting in a highly increased activity to free proteins.

Theoretical investigation of favipiravir antiviral drug based on fullerene and boron nitride nanocages

Smart implementation of novel advanced nanocarriers such as functionalized C₂₄ and B₁₂N₁₂ nanocages is used supplement for antiviral activity 5-Fluoro-2-hydroxypyrazine-3-carboxamide (Favipiravir; Avigan; T-705), as treatment of COVID-19. The interaction energies of Favipiravir with perfect (B₁₂N₁₂ and C₂₄) and doped (BC₂₃ and CB₁₁N₁₂) nanocages were studied at temperatures equal to 310.15 K and 298.15 K using DFT. Our results have shown that the interaction of the Favipiravir (C[bond, double bond]O group) with BC₂₃ and CB₁₁N₁₂ is more favorable than with the C₂₄ and B₁₂N₁₂ nanocages in the gas and aqueous environments. Additionally, the natural bond orbital, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), energy gap, chemical reactivity, molecular electrostatic potential, and thermodynamic parameters of the optimized structure have been examined. Furthermore, the UV-Vis and infrared spectroscopy have been evaluated for the investigation of the molecular orbitals Participated in the absorption spectrum of the Favipiravir before and after the interaction with the C₂₄, BC₂₃, B₁₂N_12, and CB₁₁N₁₂, sites at maximum wavelength utilizing the time-dependent density functional theory (TD-B3LYP and TD-CAM-B3LYP). The intermolecular interactions have been analyzed by non-covalent interactions (NCI) and also, the electron localization function (ELF) is discussed.

Natural Products from Madagascar, Socio-Cultural Usage, and Potential Applications in Advanced Biomedicine: A Concise Review

Natural products endowed of biological activity represent a primary source of commodities ranging from nutrition to therapeutic agents, as well as cosmetic tools and recreational principles. These natural means have been used by mankind for centuries, if not millennia. They are commonly used all over the world in socio-economical contexts, but are particularly attractive in disadvantaged areas or economically emerging situations all over the world. This is very likely due to the relatively easy recovery of these bioactive principles from the environment, at a low if any cost, as well as ease of administration and the general popular compliance concerning their consumption/ingestion. In this concise review, we focus on some popular bioactive principles of botanical origin which find a wide use in the Madagascan populations. However, due to space limitations, only some of the most common and largely diffused principles in this country are considered. Finally, a possible nanotechnological administration is discussed in the case where a potential therapeutic usage is envisaged.

Oxidative Strong Metal-Support Interactions between Metals and Inert Boron Nitride

The strong metal-support interaction (SMSI) is one of the most important concepts in heterogeneous catalysis, which has been widely investigated between metals and active oxides triggered by reductive atmospheres. Here, we report the oxidative strong metal-support interaction (O-SMSI) effect between Pt nanoparticles (NPs) and inert hexagonal boron nitride (h-BN) sheets, in which Pt NPs are encapsulated by oxidized boron (BO_x) overlayers derived from the h-BN support under oxidative conditions. De-encapsulation of Pt NPs has been achieved by washing in water, and the residual ultrathin BO_x overlayers work synergistically with surface Pt sites for enhancing CO oxidation reaction. The O-SMSI effect is also present in other h-BN-supported metal catalysts such as Au, Rh, Ru, and Ir within different oxidative atmospheres including O₂ and CO₂, which is determined by metal-boron interaction and O affinity of metals.

A Review on van der Waals Boron Nitride Quantum Dots

Boron nitride quantum dots (BNQDs) have gained increasing attention for their versatile fluorescent, optoelectronic, chemical, and biochemical properties. During the past few years, significant progress has been demonstrated, started from theoretical modeling to actual application. Many interesting properties and applications have been reported, such as excitation-dependent emission (and, in some cases, non-excitation dependent), chemical functionalization, bioimaging, phototherapy, photocatalysis, chemical, and biological sensing. An overview of this early-stage research development of BNQDs is presented in this article. We have prepared un-bias assessments on various synthesis methods, property analysis, and applications of BNQDs here, and provided our perspective on the development of these emerging nanomaterials for years to come.

Boron nitride-based materials for water purification: Progress and outlook

Analogous to the carbon family, boron nitride (BN)-based materials have gained considerable attention in recent times for applications in various fields. Owing to their extraordinary characteristics, i.e., high surface area, low density, superior thermal stability, mechanical strength, and conductivity, excellent corrosion, and oxidation resistance, the BN nanomaterials have been explored in water remediation. This article critically evaluates the latest development in applications of BN-based materials in water purification with focus on adsorption, synthesis of novel membranes and photocatalytic degradation of pollutants. The adsorption of various noxious pollutants, i.e., dyes, organic compounds, antibiotics, and heavy metals from aqueous medium BN-based materials are described in detail by illustrating the adsorption mechanism and regeneration potential. The major hurdles and opportunities related to the synthesis and water purification applications of BN-based materials are underscored. Finally, a roadmap is suggested for future research to assure the effective applications of BN-based materials in water purification. This review is beneficial in understanding the current status of these unique materials in water purification and accelerating the research focusing their future water remediation applications.

Pristine and Antibiotic-Loaded Nanosheets/Nanoneedles-Based Boron Nitride Films as a Promising Platform to Suppress Bacterial and Fungal Infections

In recent years, bacteria inactivation during their direct physical contact with surface nanotopography has become one of the promising strategies for fighting infection. Contact-killing ability has been reported for several nanostructured surfaces, e.g., black silicon, carbon nanotubes, zinc oxide nanorods, and copper oxide nanosheets. Herein, we demonstrate that Gram-negative antibiotic-resistant Escherichia coli (E. coli) bacteria are killed as a result of their physical destruction while contacting nanostructured h-BN surfaces. BN films, made of spherical nanoparticles formed by numerous nanosheets and nanoneedles with a thickness <15 nm, have been obtained through a reaction of ammonia with amorphous boron. The contact-killing bactericidal effect of BN nanostructures has been compared with a toxic effect of gentamicin released from them. For a wider protection against bacterial and fungal infection, the films have been saturated with a mixture of gentamicin and amphotericin B. Such BN films demonstrate a high antibiotic/antimycotic agent loading capacity and a fast initial and sustained release of therapeutic agents for 170-260 h depending on the loaded dose. The pristine BN films possess high antibacterial activity against E. coli K-261 strain at their initial concentration of 10⁴ cells/mL, attaining >99% inactivation of colony forming units after 24 h, same as gentamicin-loaded (150 μg/cm²) BN sample. The BN films loaded with a mixture of gentamicin (150 and 300 μg/cm²) and amphotericin B (100 μg/cm²) effectively inhibit the growth of E. coli K-261 and Neurospora crassa strains. During immersion in the normal saline solution, the BN film generates reactive oxygen species (ROS), which can lead to accelerated oxidative stress at the site of physical cell damage. The obtained results are valuable for further development of nanostructured surfaces having contact killing, ROS, and biocide release abilities.

Desulfurization on Boron Nitride and Boron Nitride-based Materials

Combustion of liquid fuels containing sulfur compounds is highly unfavorable due to the adverse effects caused by the resultant SO_x emission. Consequently, catalytic and adsorptive materials having the capacity to eliminate the sulfur compounds from liquid fuels are very attractive. Hexagonal boron nitride (BN), with its interesting chemical and physical properties, finds applications in diverse fields, especially in energy and environmental applications. Recently, BN and BN-based materials have gained significant interest in emerging desulfurization processes such as oxidative desulfurization and adsorptive desulfurization. In this review, BN and BN-based materials are elaborately discussed in the context of their use in various desulfurization techniques. A brief description about the different desulfurization processes is provided at the outset. The relationship between the characteristics (the defects, morphology, porosity and surface area) of BN and desulfurization efficiency is also summarized. Furthermore, the mechanistic insights regarding the action of BN materials in the desulfurization processes are discussed. With this review, the synthetic strategies for designing the novel BN-based catalysts/adsorbents for the effective desulfurization of liquid fuels can be grasped.

Dispersion of high-quality boron nitride nanosheets in polyethylene for nanocomposites of superior thermal transport properties

High-quality boron nitride nanosheets (BNNs) characterized by large aspect ratios and less defective surfaces and structures are in demand for thermal management and other uses that exploit the uniquely advantageous properties of boron nitride, such as being highly thermally conductive yet electrically insulating and extreme chemical and thermal stabilities. In this study, an ammonia-assisted exfoliation processing method was developed and applied to the preparation of high-quality BNNs. As a demonstration of the excellent potential of these nanomaterials, the BNNs were dispersed in polyethylene polymers for nanocomposite films of superior thermal transport performance at levels significantly beyond the state of the art in the literature. Effects of crosslinking in the nanocomposite film structure on thermal transport were also explored and favorable outcomes were achieved.

Metal Mimics: Lightweight, Strong, and Tough Nanocomposites and Nanomaterial Assemblies

The ideal structural material would have high strength and stiffness with a tough ductile failure, all with a low density. Historically, no such material exists, and materials engineers have had to sacrifice a desired property during materials selection, with metals (high density), fiber composites (brittle failure), and polymers (low stiffness) having fundamental limitations on at least one front. The ongoing revolution of nanomaterials provides a potential route to build on the potential of fiber-reinforced composites, matching their strength while integrating toughening behaviors akin to metal deformations, all while using low-weight constituents. Here, the challenges, approaches, and recent developments of nanomaterials for structural applications are discussed, with an emphasis on improving toughening mechanisms, which is often the neglected factor in a field that chases strength and stiffness.

Metal/semiconductor interfaces in nanoscale objects: synthesis, emerging properties and applications of hybrid nanostructures

Hybrid nanostructures, composed of multi-component crystals of various shapes, sizes and compositions are much sought-after functional materials. Pairing the ability to tune each material separately and controllably combine two (or more) domains with defined spatial orientation results in new properties. In this review, we discuss the various synthetic mechanisms for the formation of hybrid nanostructures of various complexities containing at least one metal/semiconductor interface, with a focus on colloidal chemistry. Different synthetic approaches, alongside the underlying kinetic and thermodynamic principles are discussed, and future advancement prospects are evaluated. Furthermore, the proved unique properties are reviewed with emphasis on the connection between the synthetic method and the resulting physical, chemical and optical properties with applications in fields such as photocatalysis.

Metal-Free Modified Boron Nitride for Enhanced CO2 Capture

Porous boron nitride is a new class of solid adsorbent with applications in CO2 capture. In order to further enhance the adsorption capacities of materials, new strategies such as porosity tuning, element doping and surface modification have been taken into account. In this work, metal-free modification of porous boron nitride (BN) has been prepared by a structure directing agent via simple heat treatment under N2 flow. We have demonstrated that textural properties of BN play a pivotal role in CO2 adsorption behavior. Therefore, addition of a triblock copolymer surfactant (P123) has been adopted to improve the pore ordering and textural properties of porous BN and its influence on the morphological and structural properties of pristine BN has been characterized. The obtained BN-P123 exhibits a high surface area of 476 m2/g, a large pore volume of 0.83 cm3/g with an abundance of micropores. More importantly, after modification with P123 copolymer, the capacity of pure CO2 on porous BN has improved by about 34.5% compared to pristine BN (2.69 mmol/g for BN-P123 vs. 2.00 mmol/g for pristine BN under ambient condition). The unique characteristics of boron nitride opens up new routes for designing porous BN, which could be employed for optimizing CO2 adsorption.

A Combined Mechanochemical and Calcination Route to Mixed Cobalt Oxides for the Selective Catalytic Reduction of Nitrophenols

Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.

Modification of boron nitride nanocages by titanium doping results unexpectedly in exohedral complexes

Despite their early experimental production and observation, the unambiguous molecular structures of metal-containing boron nitride (BN) nanocages still remain mysterious. It has been commonly assumed that this family of compounds has the metal atom confined inside the cage, just like their isoelectronic cousins, carbon metallofullerenes do. Here, we demonstrate that Ti(BN)_n (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$n$$\end{document}n = 12–24) complexes have, unexpectedly, an exohedral structure instead of an endohedral one, which could be verified by collision-induced dissociation experiments. The predicted global minimum structures exhibit some common bonding features accounting for their high stability, and could be readily synthesized under typical conditions for generating BN nanoclusters. The Ti doping dramatically changes not only the cage topology, but the arrangement of B and N atoms, endowing the resultant compounds with potential for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathrm{CO}}_{2}$$\end{document}CO2 capture and nitrogen fixation. These findings may expand or alter the understanding of BN nanostructures functionalized with other transition metals.

Although isolated experimentally, the molecular structures of metal-containing boron nitride cages are still unknown. Here the authors show via DFT calculations that externally bound complexes of boron nitride fullerenes doped with a single titanium atom are strikingly more stable than the endohedral ones.

Tribological and Thermophysical Properties of Environmentally-Friendly Lubricants Based on Trimethylolpropane Trioleate with Hexagonal Boron Nitride Nanoparticles as an Additive

Dispersions based on hexagonal boron nitride, h-BN, nanoparticles, at 0.50, 0.75 and 1.0 wt.% mass concentrations, in an ester base oil composed mainly of trimethylolpropane trioleate, were investigated as potential nanolubricants. The stability of the dispersions was assessed to determine the reliability of the tribological, thermophysical and rheological measurements. Density and viscosity were measured from 278.15 to 373.15 K, while rheological behavior was analyzed at shear rates from 1 to 1000 s−1 at 283.15 K. Newtonian behavior was exhibited by all nanolubricants at the explored conditions, with the exception of the highest concentration at the lowest shear rates, where possible non-Newtonian behavior was observed. Tribological tests were performed under a normal load of 2.5 N. Wear was evaluated by means of a 3D profiler, scanning electron microscopy and confocal Raman microscopy. The best tribological performance was achieved by the 0.75 wt.% nanolubricant, with reductions of 25% in the friction coefficient, 9% in the scar width, 14% in the scar depth, and 22% of the transversal area, all with respect to the neat oil. It was observed that physical protective tribofilms are created between rubbing surfaces.

Interfacial Characteristics of Boron Nitride Nanosheet/Epoxy Resin Nanocomposites: A Molecular Dynamics Simulation

The interface between nanofillers and matrix plays a key role in determining the properties of nanocomposites, but the interfacial characteristics of nanocomposites such as molecular structure and interaction strength are not fully understood yet. In this work, the interfacial features of a typical nanocomposite, namely epoxy resin (EP) filled with boron nitride nanosheet (BNNS) are investigated by utilizing molecular dynamics simulation, and the effect of surface functionalization is analyzed. The radial distribution density (RDD) and interfacial binding energy (IBE) are used to explore the structure and bonding strength of nanocomposites interface. Besides, the interface compatibility and molecular chain mobility (MCM) of BNNS/EP nanocomposites are analyzed by cohesive energy density (CED), free volume fraction (FFV), and radial mean square displacement (RMSD). The results indicate that the interface region of BNNS/EP is composed of three regions including compact region, buffer region, and normal region. The structure at the interfacial region of nanocomposite is more compact, and the chain mobility is significantly lower than that of the EP away from the interface. Moreover, the interfacial interaction strength and compatibility increase with the functional density of BNNS functionalized by CH3–(CH2)4–O– radicals. These results adequately illustrate interfacial characteristics of nanocomposites from atomic level.