Bi2SiO5@g-SiO2 upconverting nanoparticles: a bismuth-driven core-shell self-assembly mechanism

Light Conversion upon Photoexcitation of NaBiF4:Yb3+/Ho3+/Ce3+ Nanocrystalline Particles

NaBiF₄ nanocrystalline particles were synthesized by means of a facile precipitation synthesis route to explore upconversion emission properties when doped with lanthanide ions. In particular, the incorporation of the Yb³⁺-Ho³⁺-Ce³⁺ triad with controlled ion concentration facilitates near-IR pumping conversion into visible light, with the possibility of color emission tuning depending on Ce³⁺ doping amount. We observed that introducing a Ce³⁺ content up to 20 at.% in NaBiF₄:Yb³⁺/Ho³⁺, the chromaticity progressively turns from green for the Ce³⁺ undoped system to red. This is due to cross-relaxation mechanisms between Ho³⁺ and Ce³⁺ ions that influence the relative efficiency of the overall upconversion pathways, as discussed on the basis of a theoretical rate equation model. Furthermore, experimental results suggest that the photoexcitation of intra-4f Ho³⁺ transitions with light near the UV-visible edge can promote downconverted Yb³⁺ near-IR emission through quantum cutting triggered by Ho³⁺-Yb³⁺ energy transfer mechanisms. The present study evidences the potentiality of the developed NaBiF₄ particles for applications that exploit lanthanide-based light frequency conversion and multicolor emission tuning.

Phase and Structural Thermal Evolution of Bi-Si-O Catalysts Obtained via Laser Ablation

Laser methods are successfully used to prepare complex functional nanomaterials, especially for biomedicine, optoelectronics, and heterogeneous catalysis. In this paper, we present complex oxide and composite nanomaterials based on Bi and Si produced using laser ablation in liquid followed by subsequent powder annealing. Two synthesis approaches were used, with and without laser post-treatment of mixed (in an atomic ratio of 2:1) laser-generated Bi and Si colloids. A range of methods were used to characterize the samples: UV-Vis diffusion reflection, IR and Raman spectroscopy, synchronous thermal analysis, X-ray diffraction, transmission electron microscopy, as well as specific surface-area evaluation. We also followed the dynamics of phase transformations, as well as composition, structure and morphology of annealed powders up to 800 °C. When heated, the non-irradiated series of samples proceeded from metallic bismuth, through β-Bi₂O₃, and resulted in bismuth silicates of various stoichiometries. At the same time, in their laser-irradiated counterparts, the formation of silicates proceeded immediately from the amorphous Bi₂SiO₅ phase formed after laser treatment of mixed Bi and Si colloids. Finally, we show their ability to decompose persistent organic molecules of Rhodamine B and phenol under irradiation with a soft UV (375 nm) source.

Genotoxicity and Immunotoxicity of Titanium Dioxide-Embedded Mesoporous Silica Nanoparticles (TiO2@MSN) in Primary Peripheral Human Blood Mononuclear Cells (PBMC)

Background: TiO₂ nanoparticles (TiO₂ NPs) are the nanomaterial most produced as an ultraviolet (UV) filter. However, TiO₂ is a semiconductor and, in nanoparticle size, is a strong photocatalyst, raising concerns about photomutagenesis. Mesoporous silica nanoparticles (MSN) were synthetized incorporating TiO₂ NPs (TiO₂@MSN) to develop a cosmetic UV filter. The aim of this study was to assess the toxicity of TiO₂@MSN, compared with bare MSN and commercial TiO₂ NPs, based on several biomarkers. Materials and Methods: Human peripheral blood mononuclear cells (PBMC) were exposed to TiO₂@MSN, bare MSN (network) or commercial TiO₂ NPs for comparison. Exposed PBMC were characterized for cell viability/apoptosis, reactive oxygen species (ROS), nuclear morphology, and cytokines secretion. Results: All the nanoparticles induced apoptosis, but only TiO₂ NPs (alone or assembled into MSN) led to ROS and micronuclei. However, TiO₂@MSN showed lower ROS and cytotoxicity with respect to the P25. Exposure to TiO₂@MSN induced Th2-skewed and pro-fibrotic responses. Conclusions: Geno-cytotoxicity data indicate that TiO₂@MSN are safer than P25 and MSN. Cytokine responses induced by TiO₂@MSN are imputable to both the TiO₂ NPs and MSN, and, therefore, considered of low immunotoxicological relevance. This analytical assessment might provide hints for NPs modification and deep purification to reduce the risk of health effects in the settings of their large-scale manufacturing and everyday usage by consumers.

Rapid aqueous-phase synthesis of highly stable K0.3Bi0.7F2.4 upconversion nanocrystalline particles at low temperature

Lanthanide-doped K_0.3Bi_0.7F_2.4 nanocrystalline particles are synthesized through an ultrafast (only 1 min) and aqueous-phase chemical method at low temperature (room temperature ∼ 90 °C), which can be used as pigments for anti-counterfeiting.

Confined-Melting-Assisted Synthesis of Bismuth Silicate Glass-Ceramic Nanoparticles: Formation and Optical Thermometry Investigation

Bismuth-based (nano)materials have been attracting increasing interest due to appealing properties such as high refractive indexes, intrinsic opacity, and structural distortions due to the stereochemistry of 6s² lone pair electrons of Bi³⁺. However, the control over specific phases and strategies able to stabilize uniform bismuth-based (nano)materials is still a challenge. In this study, we employed the ability of bismuth to lower the melting point of silica to introduce a new synthetic approach able to confine the growth of bismuth-oxide-based materials into nanostructures. Combining in situ temperature-dependent synchrotron radiation X-ray powder diffraction (XRPD) with high-resolution transmission electron microscopy (HR-TEM) analyses, we demonstrate the evolution of a confined Bi₂O₃-SiO₂ nanosystem from Bi₂SiO₅ to Bi₄Si₃O₁₂ through a melting process. The silica shell acts as both a nanoreactor and a silicon source for the stabilization of bismuth silicate glass-ceramic nanocrystals keeping the original spherical shape. The exciton peak of Bi₂SiO₅ is measured for the first time allowing the estimation of its real energy gap. Moreover, based on a detailed spectroscopic investigation, we discuss the potential and the limitations of Nd³⁺-activated bismuth silicate systems as ratiometric thermometers. The synthetic strategy introduced here could be further explored to stabilize other bismuth-oxide-based materials, opening the way toward the growth of well-defined glass-ceramic nanoparticles.

Sodium niobate based hierarchical 3D perovskite nanoparticle clusters

We report a microwave assisted synthesis of NaNbO3 perovskite mesocrystals with a hierarchical morphology formed by the self-assembly of nanoparticles in particle clusters. The synthesis method combines non-aqueous sol-gel synthesis and microwave heating in a single step process that allows us to isolate crystalline single phase NaNbO3 in few minutes. A detailed investigation of the effect of the reaction temperature on the crystallinity and morphology of the product was conducted. The synthesis stabilizes the unusual orthorhombic phase Pmma, a property that can be ascribed to the crystal size (24 nm). TEM and SAED analyses show that the hierarchical polycrystalline particles behave as single crystals, a feature related to a non-classical crystallization mechanism. Moreover, the optical bandgap of this NaNbO3 phase was estimated for the first time. The results suggest the potential of this synthetic procedure for the fast production of high quality tertiary oxide nanocrystals.

Influence of functionalized core-shell structure on the thermodynamic and shape memory properties of nanocomposites

Filler/matrix interfacial cohesion exerts a straightforward effect on stress transfer at the interface in composite structures, thereby significantly affecting their integrated mechanical properties. Thus, controlling the interface interaction of polymers/fillers is essential for the fabrication of high-performance polymer composites. In this work, a functionalized core-shell structured hybrid was prepared via charge attraction and applied as a novel filler in the trans-1,4-polyisoprene matrix to improve the interfacial interaction of the filler/matrix. A series of tests on the micro- and macroscale was performed to investigate its thermal, mechanical and shape memory performances. The obtained results show that while guaranteeing the shape memory properties of the composites, the utilization of the core-shell structured hybrid not only improved the heat resistant performance, but also contributed to better mechanical properties. This provides solid evidence for the potential of the innovative method presented herein, which may shed some light on the improvement of the interface design strategy and the development of composites with high performances.

Yolk–shell structured Bi2SiO5:Yb3+,Ln3+ (Ln = Er, Ho, Tm) upconversion nanophosphors for optical thermometry and solid-state lighting

Bi₂SiO₅:Yb³⁺,Er³⁺ yolk–shell nanophosphors have been successfully synthesized, which are expected to find important applications in optical thermometry and solid-state lighting.

Development of functionalized core-shell nanohybrid/synthetic rubber nanocomposites with enhanced performance

Regulating the interfacial interaction between fillers and matrices is crucial for fabricating high-performance polymer composites. In this research, a functionalized core-shell hybrid silica@graphene oxide was produced by the charge attraction method, and then added to a trans-1,4-polyisoprene matrix as a neoteric filler to obtain a brand-new silica@graphene oxide/trans-1,4-polyisoprene polymer nanocomposite. The hybrid incorporation simultaneously improved the fracture toughness, mechanical strength and heat resistance of the nanocomposites. We examined the thermal, mechanical and shape memory properties of the nanocomposites via methodical measurements from the microscale to the macroscale. The experimental results demonstrated that, compared with other samples, the nanocomposite sample with 1.0 wt% silica@graphene oxide exhibited the best mechanical and thermal performance, and the fabricated nanocomposites showed good shape memory properties. This new and feasible approach is likely to enable a new strategy for the design of interfaces for developing nanocomposites with high performance.

Bismuth titanate-based UV filters embedded mesoporous silica nanoparticles: Role of bismuth concentration in the self-sealing process

The development of new safe inorganic UV filters to effectively protect the skin from ultraviolet (UV) radiation effects is an emerging issue. Bismuth titanate-based UV filters embedded into mesoporous silica nanoparticles (MSN) represent a new class of inorganic sunscreens, with excellent UVA and UVB shielding properties. In addition, the presence of bismuth ions promotes a self-sealing process, allowing (i) the entrapment of the active phases in the deepest core of the system and (ii) the formation of an external glassy silica layer with a consequent suppression of the photocatalytic activity. In this work, aimed at studying in detail the self-sealing mechanism and accessing the role of bismuth ions in the formation of the system, a series of samples impregnated with a different amount of bismuth were investigated. The self-sealing process already occurs at the lowest content of bismuth and the mechanism is demonstrated to be triggered by the ability of Bi to work as a low-melting point agent for silica. Finally, a sunscreen formulation containing the new UV filter was prepared and the Sun Protection Factor (SPF), the pH and the viscosity were measured, demonstrating the potential of the proposed material for large-scale applications.

Lanthanide-doped mesoporous MCM-41 nanoparticles as a novel optical–magnetic multifunctional nanobioprobe

To research and develop potential multifunctional nanoprobes for biological application, lanthanide-doped MCM-41 (Ln-MCM-41, Ln = Gd/Eu) silica nanoparticles with excellent pore structure and optical–magnetic properties were synthesized via a facile and economical sol–gel method. The microstructure and pore distribution of Ln-MCM-41 nanoparticles were obviously affected by the Ln-doping. As the Ln/Si mole ratio increased, the specific surface area and total pore volume of Ln-MCM-41 nanoparticles rapidly decreased. However, the Ln-MCM-41 nanoparticles still retained the typical well-ordered mesoporous structure, and exhibited excellent drug release behavior. Moreover, the drug release rate of Ln-MCM-41 was remarkably pH-dependent and increased gradually upon decreasing pH. Additionally, these nanoparticles also exhibit considerable photoluminescence properties, living cells photoluminescence imaging in vitro, and paramagnetism behavior at room temperature due to the Ln³⁺-ions doping. Our research shows the possibility of our Ln-MCM-41 nanoparticles as multifunctional nanoprobes for application in bioseparation, bioimaging, and drug delivery.

Mesoporous Ln-MCM-41 nanoparticles with optical–magnetic dual-modal properties can be used as a multifunctional nanoprobe for application in bioseparation, optical–magnetic bioimaging, and drug delivery.