Hierarchical porous activated biochar derived from marine macroalgae wastes (Enteromorpha prolifera): facile synthesis and its application on Methylene Blue removal

Ordered Mesoporous Carbon as Adsorbent for the Removal of a Triphenylmethane Dye from Its Aqueous Solutions

A nanostructured material, ordered mesoporous carbon (OMC), was synthesised in metal- and halide-free form and its use for the sequestration of crystal violet, a hazardous triphenylmethane dye, is reported for the first time. The OMC material is characterised using scanning transmission electron microscopy with energy-dispersive spectroscopy for chemical analysis, by Fourier-transform infrared spectroscopy, and by nitrogen gas physisorption. The ideal conditions for the uptake of crystal violet dye were determined in batch experiments covering the standard parameters: pH, concentration, contact time, and adsorbent dosage. Experimental data are validated by applying Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherms. The thermodynamic parameters, ΔH°, ΔG°, and ΔS°, are calculated and it has been found that the adsorption process is spontaneous and endothermic with increasing disorder. An in-depth analysis of the kinetics of the adsorption process, order of the reaction and corresponding values of the rate constants was performed. The adsorption of crystal violet over OMC has been found to follow pseudo-second-order kinetics through a film diffusion process at all temperatures studied. Continuous flow column operations were performed using fixed bed adsorption. Parameters including percentage saturation of the OMC bed are evaluated. The exhausted column was regenerated through a desorption process and column efficiency was determined.

Effect of citric acid modification on the properties of hydrochar and pyrochar and their adsorption performance toward methylene blue: crucial roles of minerals and oxygen functional groups

Modification is widely used to enhance the adsorption performance of pristine hydrochar (HBC) and pyrochar (BC). However, comparisons between modified HBC and BC toward pollutant removal have rarely been reported. In this study, pristine HBC and BC derived from rice straw were first produced, and then citric acid (CA) was used as a modifier to synthesize CA-modified HBC (CAHBC) and CA-modified BC (CABC). Furthermore, the adsorption performance of biochars toward methylene blue (MB) was investigated. The results showed that BC exhibits relatively rough surfaces and contains more minerals (ash), whereas HBC has plentiful O-containing functional groups and fewer minerals. CA modification partially removed minerals from the surface of BC, which weakened the ion exchange, surface complexation, and n-π interaction, resulting in a lower adsorption ability toward MB. By contrast, CA produced more O-containing functional groups on the surface of HBC, which strengthened the hydrogen bonding and electrostatic interaction, thus increasing the adsorption capacity toward MB. The two-compartment model showed a good fit to the adsorption process of MB on CAHBC, and the isotherm data for MB adsorption by HBC and CAHBC are suitable for the Freundlich model. The highest adsorption amount of MB using CAHBC was 80.13 mg·g-1, which was 27.66% higher than that for CABC. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis indicated that the carboxyl groups in the surface functional groups of CAHBC played a crucial role in the MB adsorption process. In addition, CAHBC showed a good performance for a wide range of pH values (4.0-10.0) and under the interference of coexisting ions, and also presented a recycling ability. Furthermore, the adsorption of MB on CAHBC biochar was a spontaneous, exothermic, degree-of-randomness-increasing process. Consequently, CA modification of HBC is a promising strategy and could be used for MB removal from aquatic environments.

Techno-economic assessment of waste mandarin biochar as a green adsorbent for binary dye wastewater effluents of methylene blue and basic fuchsin: Lab- and large-scale investigations

Treating polluted wastewater effluents on a large-scale requires the development of high performance and cost-effective adsorbents. The recycling of waste mandarin peels, an environmentally friendly, and copiously available waste biomass into biochar (MRBC), has been approached. In the context of finding affordable and effective solutions for depollution of wastewater, MRBC was used for the adsorption of two dyes: methylene blue (MB) as well as basic fuchsin (BF) from their individual solutions and binary combinations. Batch adsorption studies were performed by employing the Box-Behnken (BB) design. The adsorption competency of dyes was analyzed to find the percentage removal (%R) and the adsorption capacity (qe, mg/g). The dependent parameters (qe and %R) were determined as a function of pH, dose of MRBC (AD), contact time (CT), and concentration of methylene blue [MB]/ basic fuchsin [BF]. Removal of 98.14% of MB and 83.18% of BF was successfully achieved. Equilibrium experiments depicted that Langmuir and Freundlich models suit adsorption of dyes. The maximum adsorption capacity (qmax) was 99.11 (MB) and 78.01 mg/g (BF), individually. However, when the dyes are combined, the qmax decreased to 57.09 and 68.52 mg/g for MB and BF, correspondingly. The cost of MRBC was estimated to be ∼ 4 USD/kg, while the overall cost of wastewater treatment was estimated to be 1.06 USD/m3/year.

A novel, efficient and economical alternative for the removal of toxic organic, inorganic and pathogenic water pollutants using GO-modified PU granular composite

Multicomponent wastewater treatment utilising simple and cost-effective materials and methods is an important research topic. This study has reported the fabrication and utilisation of graphene oxide (GO) embedded granular Polyurethane (PU) (GOPU) adsorbent for the treatment of lead ion (Lead ion (Pb(II)), Methylene blue (MB), and E. coli. PU granules were wrapped with GO flakes to improve hydrophilicity, interaction with polluted water, cation-exchange reaction, and binding of pollutants on its surface. Synthesised GOPU granules were characterised by X-Ray Diffraction (XRD), Raman, Fourier transform infrared (FTIR) spectroscopy, and Scanning electron microscopy (SEM) analysis to ensure the successful synthesis of GO and fabrication of GOPU granules. Further, batch and continuous adsorption processes were studied in different operating conditions to evaluate the performance of GOPU granules in practical applications. The kinetic and isotherm analyses revealed that the adsorption of Lead (Pb(II)) ion and Methylene Blue (MB) dye followed the Freundlich and Langmuir isotherm models, respectively, and they showed good agreement with the Pseudo-second-order kinetic model. The adsorption capacities of GOPU granules for the elimination of Pb(II) and MB dye were about 842 mg/g and 899 mg/g, respectively. Additionally, investigations into the fixed bed column revealed that the adsorption column performed best at a flow rate of 5 mL/min and a bed height of 6 cm. Pb(II) adsorption had a bed uptake capacity (q_bed) of 88 mg/g and percentage removal efficiency (%R) of 76%. Similarly, MB adsorption had a bed uptake capacity of 202 mg/g and a percentage removal efficiency of 71%. A systematic invention on antibacterial activity toward E. coli showed that The GOPU granules have a removal efficiency of about 100% at an exposure of 24 h. These findings indicated the possible use of GOPU granules as promising adsorbents for various water pollutants.

Pseudomonas alcaliphila NEWG-2 as biosorbent agent for methylene blue dye: optimization, equilibrium isotherms, and kinetic processes

In comparison to physicochemical and chemical methods, microbial dye biosorption is regarded as an eco-effective and economically viable alternative and is a widely applied method due to its high efficiency and compatibility with the environment. Therefore, the idea of this study is to clarify to what extent the viable cells and the dry biomass of Pseudomonas alcaliphila NEWG-2 can improve the biosorption of methylene blue (MB) from a synthetic wastewater sample. The array of Taguchi paradigm has been conducted to ascertain five variables affecting the biosorption of MB by broth forms of P. alcaliphila NEWG. The data of MB biosorption were familiar to the predicted ones, indicating the precision of the Taguchi model's prediction. The maximum biosorption of MB (87.14%) was achieved at pH 8, after 60 h, in a medium containing 15 mg/ml MB, 2.5% glucose, and 2% peptone, with sorting the highest signal-to-noise ratio (38.80). FTIR spectra detected various functional groups (primary alcohol, α, β-unsaturated ester, symmetric NH2 bending, and strong C-O stretching) on the bacterial cell wall that participated in the biosorption of MB. Furthermore, the spectacular MB biosorption ability was validated by equilibrium isotherms and kinetic studies (the dry biomass form), which were derived from the Langmuir model (qmax = 68.827 mg/g). The equilibrium time was achieved in about 60 min, with 70.5% of MB removal. The biosorption kinetic profile might be adequately represented by pseudo-second order and Elovich models. The changes in the bacterial cells before and after the biosorption of MB were characterized using a scanning electron microscope. As realized from the aforementioned data, the bacterium is a talented, effective, eco-friendly, and low-cost bio-sorbent for the decolorization and remedy of an industrial effluent containing MB from an aqueous environment. The current outcomes in the biosorption of MB molecules promote the use of the bacterial strain as viable cells and/or dry biomass in ecosystem restoration, environmental cleanup, and bioremediation studies.

Hierarchical porous biochar from kelp: Insight into self-template effect and highly efficient removal of methylene blue from water

Biochar is known to efficiently remove dyes especially for biochar with hierarchical pores and partial N-species. Here, a facile pyrolysis is used to yield N-doped biochar from kelp without additives, showing surface areas of 771 m2/g as temperature up to 1000 °C and hierarchical small-sized mesopores (2-4 nm) and wide meso-macropores (8-60 nm). A possible self-template mechanism from inorganics is proposed to form hierarchical pore architecture in biochar and used for methylene blue (MB) removal. Biochar pyrolyzed at 1000 °C is found to be efficient for MB removal with uptake of 379.8 mg/g under ambient conditions, one of the largest ever recorded uptakes for other biochar without activation, owing to synergistic effects of high surface areas, mesopores, and graphitized N-species. These results confirm that a facile pyrolysis for transformation of kelp into efficient dyes adsorbent is a cost-effective process for economic and environmental protection.

Innovative binary sorption of Cobalt(II) and methylene blue by Sargassum latifolium using Taguchi and hybrid artificial neural network paradigms

The present investigation has been designed by Taguchi and hybrid artificial neural network (ANN) paradigms to improve and optimize the binary sorption of Cobalt(II) and methylene blue (MB) from an aqueous solution, depending on modifying physicochemical conditions to generate an appropriate constitution for a highly efficient biosorption by the alga; Sargassum latifolium. Concerning Taguchi's design, the predicted values of the two responses were comparable to actual ones. The biosorption of Cobalt(II) ions was more efficient than MB, the supreme biosorption of Cobalt(II) was verified in run L21 (93.28%), with the highest S/N ratio being 39.40. The highest biosorption of MB was reached in run L22 (74.04%), with a S/N ratio of 37.39. The R2 and adjusted R2 were in reasonable values, indicating the validity of the model. The hybrid ANN model has exclusively emerged herein to optimize the biosorption of both Cobalt(II) and MB simultaneously, therefore, the ANN model was better than the Taguchi design. The predicted values of Cobalt(II) and MB biosorption were more obedience to the ANN model. The SEM analysis of the surface of S. latifolium showed mosaic form with massive particles, as crosslinking of biomolecules of the algal surface in the presence of Cobalt(II) and MB. Viewing FTIR analysis showed active groups e.g., hydroxyl, α, β-unsaturated ester, α, β-unsaturated ketone, N-O, and aromatic amine. To the best of our knowledge, there are no reports deeming the binary sorption of Cobalt(II) and MB ions by S. latifolium during Taguchi orthogonal arrays and hybrid ANN.

A green 3-step combined modification for the preparation of biomass sorbent from waste chestnut thorns shell to efficient removal of methylene blue

Although several green methods for the preparation of biomass adsorbents have been proposed, the low adsorption performance of the biomass adsorbents prepared by these methods has limited the development of this technological route. This is the first work that uses an ultrasound-assisted binary solvent system and low temperature ice crystal fixation to achieve high adsorption performance of a biomass sorbent. Chestnut thorns shell (CTS) sorbent with high adsorption performance on MB was successfully prepared with an adsorption performance of 305.81 mg/g, which is on par with most high temperature carbonized adsorbents. Further reaction kinetics, TEM, XPS and FTIR studies showed that the MB adsorption of CTS was through electrostatic attraction, hydrogen bonding, ion-dipole interaction and π-π interaction. After five cycles, the adsorption capacity of the adsorbent remained at a high level. This work provided an effective strategy for safer and greener preparation of high adsorption performance adsorbents from agroforestry waste.

A review on the treatment of dyes in printing and dyeing wastewater by plant biomass carbon

Printing and dyeing wastewater (PDW) has characteristics of large amount of water, elevated content of residual dyes, poor biodegradability, high alkalinity and large change of water quality, making its treatment difficult. Development of efficient and economic PDW treatment technology has gained considerable interest in the field of environmental protection. Use of plant biomass carbon (PBC) for the adsorption of dyes is a feasible and economical technology. This review summarizes current literature discussing the preparation method and physicochemical characteristics of PBC prepared from different plant species, the effect of PBC on the removal of dyes, influencing factors affecting the removal, and relevant adsorption models. The shortcomings of current research and the direction of future research are also pointed out in the review.

Recent advances in biochar technology for textile dyes wastewater remediation: A review

With the continuous rise of industrialization and agriculture, the concentration of organic contaminants such as dyes in the ecosystem has increased in subsequent years, causing major environmental contamination. Adsorption has been revealed to be a reliable and cost-effective way of eliminating organic pollutants. Biochar technology has the potential of converting trash into treasure when utilized for environmental remediation since it has numerous benefits such as the availability of diverse types of raw materials, low cost, and reusability. The potential of biochar as an adsorbent, support for catalysis, and a composite catalyst for dye degradation and mineralization is summarized in this research. It discusses its current research status in the adsorption and degradation of various dyes, incorporates the pertinent adsorption variables, encapsulates its regeneration techniques, investigates its engineering applications, and finally analyses limitations and discusses future development prospects.

Facile Preparation of Porous Carbon Derived from Pomelo Peel for Efficient Adsorption of Methylene Blue

Pomelo peel waste-derived porous carbon (PPPC) was prepared by a facile one-step ZnCl₂ activation method. The preparation parameters of PPPC were the mass ratio of ZnCl₂ to pomelo peel of 2:1, carbonization temperature of 500 °C, and carbonization time of 1 h. This obtained PPPC possessed abundant macro-,meso-, and micro-porous structures, and a large specific surface area of 939.4 m² g^-1. Surprisingly, it had excellent adsorption ability for methylene blue, including a high adsorption capacity of 602.4 mg g^-1 and good reusability. The adsorption isotherm and kinetic fitted with Langmuir and pseudo-second order kinetic models. This work provides a novel strategy for pomelo peel waste utilization and a potential adsorbent for treating dye wastewater.

How the Carbonization Time of Sugarcane Biomass Affects the Microstructure of Biochar and the Adsorption Process?

Biochars (BCs) are very versatile adsorbents, mainly, in the effectiveness of adsorption of organic and inorganic compounds in aqueous solutions. Here, the sugarcane biomass (SCB) was used to produce biochar at different carbonization times: 1, 2, 3, 4, and 5 h, denominated as BC1, BC2, BC3, BC4, and BC5, respectively. The superficial reactivity was studied with adsorption equilibrium experiments and kinetics models; Methylene Blue (MB) was used as adsorbate at different pH values, concentrations, and temperatures. In summary, the carbonization time provides the increase of superficial area, with exception of BC4, which decreased. Equilibrium studies showed inflection points and fluctuations with different initial dye concentration and temperature; SCB showed the best adsorption capacity compared to the BCs at the three temperatures tested, varying with the increase of MB concentration, suggesting the dependence of these two main factors on the adsorption process. The proposed adsorption mechanism suggests the major influence of Coulomb interactions, H-bonding, and π-interactions on the adsorption of MB onto adsorbents, evidencing that the adsorption is led by physical adsorption. Therefore, the results led to the use of the SCB without carbonization at 200 °C, saving energy and more adsorbent mass, considering that the carbonization influences weight loss. This study has provided insights of the use of SCB in MB dye adsorption as a low-cost and eco-friendly adsorbent.

Adsorptive removal of metformin on specially designed algae-lignocellulosic biochar mix and techno-economic feasibility assessment

Batch sorption of metformin hydrochloride (MET) onto a specially designed biochar mix consisting of both macro (MAC) and micro (MIC) algae, rice husk and pine sawdust was conducted. Pyrolysis of both MAC and MIC algae mixture was done followed by chemical activation with hydrogen-peroxide. Additionally, sorption of MET under the influence of pH was separately investigated. Batch studies of isotherms were well described by Freundlich model with high non-linearity and Freundlich exponent values ranged anywhere from 0.12 to 1.54. Heterogeneity of MET adsorption to the bonding sites was attributed to the surface functional groups of the modified biochar. Amongst the four biochars, the activated macroalgae biochar (MACAC) and microalgae biochar (MICAC) depicted favourable adsorption of MET with maximum adsorption at pH 7. Up to 76% of MET removal from the environment was obatained using the MACAC biochar. Scanning electron micrographs coupled with energy dispersive X-ray, as well as elemental analyses confirmed formation of oxygen containing surface functional groups due to activation strengthening chemisorption as the main sorption mechanism. Further, Fourier transform infra-red spectroscopy and other surface functional group analyses along with Zeta potential measurements reinforced our proposed sorption mechanism. Lowest zeta potential observed at pH 7 enhanced the electrostatic force of attraction for both the biochars. Negative zeta potential value of the biochars under different pH indicated potential of the biochars to adsorb other positively charged contaminants. From a techno-economic perspective, capital expenditure cost is not readily available, however, it is envisaged that production of pyrolyzed biochar from algal biomass could make the process economically attractive especially when the biochar could be utilised for high-end applications.

Comparing the sorption of pyrene and its derivatives onto polystyrene microplastics: Insights from experimental and computational studies

In this study, the sorption behaviors and mechanisms between polystyrene microplastics (micro-PS) and 4-rings polycyclic aromatic hydrocarbons (PAHs) pyrene (Pyr) and its derivatives (S-Pyr), including 1-methylpyrene (P-CH₃), 1-hydroxypyrene (P-OH), 1-aminopyrene (P-NH₂), 1-pyrenecarboxylic acid (P-COOH) were investigated at neutrality. The results revealed that the sorption rates of micro-PS for S-Pyr were higher than those for parent Pyr. Meanwhile, -CH₃ could slightly facilitate the sorption, whereas -OH, P-NH₂, and P-COOH intensively inhibit the sorption of S-Pyr onto micro-PS. The sorption capacities of Pyr/S-Pyr increased with decreasing size of micro-PS. Besides, the effects of salinity and temperature on the sorption characteristics of micro-PS for Pyr/S-Pyr depended on their substituents. Combined with experimental and computational methods, it could be concluded that the main sorption mechanisms were possibly hydrophobic interaction, π-π interaction and pore-filling. The observations reported here could improve predictions of environmental behaviors and bioavailability of PAHs and micro-PS.

Hierarchical Porous Catalytic Pyrolysis Char Derived from Oily Sludge for Enhanced Adsorption

A novel pyrolysis char (PC), prepared by H3PO4 catalytic pyrolysis of oily sludge (OS), was presented to remove methylene blue (MB) dye from aqueous solution for the first time. The optimal preparation conditions (catalytic pyrolysis temperature of 411 °C, H3PO4 impregnation ratio of 2.44, and catalytic pyrolysis time of 59 min) were predicted by the response surface methodology. The optimal PC exhibited favorable hierarchical porous properties, which brought a large adsorption capability (322.89 mg/g). The adsorption process fitted well with the Langmuir model and pseudo-second order model. In addition, thermodynamic parameters showed that the adsorption process was endothermic (ΔH 0 > 0) and spontaneous (ΔG 0 < 0). The adsorption capability was strongly influenced by coexisting metal ions due to the competitive adsorption effect. The inhibition for MB adsorption was arranged in the following order: Al3+ > Fe3+ > Mg2+ > Ca2+ > K+ > Na+. The adsorption mechanism of MB onto the OS-derived PC includes pore filling, π-π interactions, and electrostatic interactions. The as-obtained PC adsorbent exhibited good reusability performance, which leads to great potential in practical application for wastewater treatment.

Bioprocess development for biosorption of cobalt ions and Congo red from aquatic mixture using Enteromorpha intestinalis biomass as sustainable biosorbent

Because of the increased amount of cobalt and Congo red dye effluents attributable to the industrial operations, the capacity of Enteromorpha intestinalis biomass as a sustainable source to achieve significant biosorption percent for both pollutants from dual solution was assessed. A fifty batch FCCCD experiments for biosorption of cobalt ions and Congo red dye were performed. The complete removal of Congo red dye was obtained at 36th run using an initial pH value of 10, 1.0 g/L of Enteromorpha intestinalis biomass, 100 and 200 mg/L of Congo red and cobalt for a 20-min incubation time. Meanwhile, a cobalt removal percent of 85.22 was obtained at 35th run using a neutral pH of 7.0, 3.0 g/L of algal biomass, 150 and 120 mg/L of Congo red, and cobalt for a 60-min incubation time. For further illustration and to interpret how the biosorption mechanism was performed, FTIR analysis was conducted to inspect the role of each active group in the biosorption process, it can be inferred that -OH, C-H, C=O, O-SO3- and C-O-C groups were mainly responsible for Co2+ adsorption of from aqueous dual solution. Also, scan electron microscope revealed the appearance of new shiny particles biosorbed on E. intestinalis surface after the biosorption process. EDS analysis proved the presence of Co2+ on the algal surface after the biosorption process.

Influence of water washing treatment on Ulva prolifera-derived biochar properties and sorption characteristics of ofloxacin

The influences of water washing treatment on the properties of Ulva prolifera-derived biochar (U.P-biochar) and its sorption characteristics of ofloxacin (OFL) were investigated. The results showed that the water washing treatment significantly changed the physiochemical structures of U.P-biochars, and improved the sorption capacity of OFL. The sorption capacity of OFL by U.P-biochar was closely dependent on pyrolysis temperature (200-600 °C) and equilibrium solution pH (3-11). Different sorption mechanisms (e.g. cation exchange, electrostatic attraction, H-bond and cationic-π and π-π interactions) were dominant for specific U.P-biochars under various pH regions (acidic, neutral and alkaline). Moreover, the unwashed and washed U.P-biochars prepared at 200 °C (BC200 and BCW200) showed a higher sorption capacity of OFL at pH = 7. The two-compartment first-order model provided an appropriate description of the sorption kinetics of OFL by BC200 and BCW200 (R2 > 0.98), which revealed that the contribution ratios between the fast and slow sorption compartments (ffast/fslow, 1.55 for BC200 and 1.25 for BCW200) reduced after water washing treatment of U.P-biochar. The values of n for the Freundlich model were less than 1, which demonstrated that the sorption of OFL by BC200 and BCW200 was favourable and nonlinear. Also, the sorption of OFL by BC200 and BCW200 increased with an increase in solution temperature and the sorption process was spontaneous and endothermic. This study provides valuable information for being a primary consideration in the production and application of U.P-biochar.

Production and Dry Mechanochemical Activation of Biochars Derived from Moroccan Red Macroalgae Residue and Olive Pomace Biomass for Treating Wastewater: Thermodynamic, Isotherm, and Kinetic Studies

This study aimed to produce activated biochars (BCs) from Moroccan algae residue (AG) and olive pomace (OP) using mechanochemical activation with NaOH and ball milling (BM) for treating artificial textile wastewater containing methylene blue (MeB). The produced OP-activated BC by BM showed the highest absolute value of ζ-potential (-59.7 mV) and high removal efficiency of MeB compared to other activated BCs. The nonlinear pseudo-first-order kinetic model was the most suitable model to describe the kinetics of adsorption of MeB onto biochars produced from AG and the NaOH-activated BC from OP, whereas the nonlinear pseudo-second-order kinetic model suits the OP raw biochar and BM-activated BC. The nonlinear Langmuir isotherm model was the most suitable model for describing MeB adsorption onto BCs, compared to the nonlinear Freundlich isotherm model. The maximum adsorption capacities of AG-activated BCs with NaOH and BM were 13.1 and 9.1 mg/g, respectively, while those of OP-activated BCs were 2.6 and 31.8 mg/g, respectively. The thermodynamic study indicates the spontaneous and endothermic nature of the adsorption process of most activated BCs. In addition, ΔS° values indicate the increase of randomness at the solid-liquid interface during MeB sorption onto BC.

Hierarchical nano-porous biochar prepared by a MgO template method for high performance of PNP adsorption

Hierarchical nano-porous biochar (HNBC) derived from Enteromorpha prolifera (EP) was prepared using a facile MgO templated strategy, which exhibits a remarkable adsorption performance for p-nitrophenol (PNP).

Ginger Straw Waste-Derived Porous Carbons as Effective Adsorbents toward Methylene Blue

In this work, ginger straw waste-derived porous carbons, with high adsorption capacity, high adsorption rate, and good reusability for removing the toxic dye of methylene blue from wastewater, were prepared by a facile method under oxygen-limiting conditions. This study opens a new approach for the utilization of ginger straw waste, and the porous materials can be employed as great potential adsorbents for treating dye wastewater.