Tough and tissue-adhesive polyacrylamide/collagen hydrogel with dopamine-grafted oxidized sodium alginate as crosslinker for cutaneous wound healing

Trilayered nanocellulose-based patches loaded with acyclovir and hyaluronic acid for the treatment of herpetic lesions

This study focuses on the preparation of layered bacterial nanocellulose (BNC) patches for drug delivery and wound healing in the context of herpes labialis. Nanostructured patches were prepared by selective aqueous diffusion of acyclovir (ACV, antiviral drug), hyaluronic acid (HA, skin healing promoter), and glycerol (GLY, plasticizer and humectant) in the BNC network, followed by assembly into trilayered patches with ACV on the central layer of the patch (ACVT) or divided between two layers (ACVH), to modulate drug release. Both patches showed good layers' adhesion and thermal stability (125 °C), UV barrier properties, good static (Young's modulus up to 0.9 GPa (dry) and 0.7 GPa (wet)) and dynamic mechanical performance, and adhesion strength (21 kPa) comparable to or higher than other materials and commercial adhesives for wound healing. In vitro drug dissolution showed faster ACV release from the ACVH patch (77 ± 5 %, 10 min) than from the ACVT one (50 ± 7 %), suggesting efficient drug delivery. ACVH closely resembled a commercial cream formulation in terms of release and permeation profiles. The patches were non-cytotoxic toward L929 fibroblasts, promoting cell adhesion and wound closure (in vitro). These results underscore the dual-action potential of the layered patches for managing herpetic lesions.

Study the effect of different concentrations of polydopamine as a secure and bioactive crosslinker on dual crosslinking of oxidized alginate and gelatin wound dressings

Alginate hydrogels are commonly used in wound care due to their ability to maintain a moist environment, absorb fluids, and aid wound healing. However, their stability and mechanical properties can sometimes limit their effectiveness. This study explores a new approach by creating a dual network system of oxidized alginate and gelatin hydrogel crosslinked with polydopamine in a single step, with the goal of improving the mechanical properties of these hydrogels. The unique aspect of this research is the comprehensive examination of different polydopamine concentrations in dual crosslinking systems. First, alginate was modified with sodium periodate to create additional active groups on its backbone, and various polydopamine concentrations were then tested to assess their impact on the dual crosslinking network and hydrogel properties. The study involved a range of tests, including FTIR, H-NMR, SEM, gelation time, rheology, adhesion, antioxidant activity, swelling ratio, weight loss, drug release, and cell viability. The addition of polydopamine was found to enhance the crosslinking density (0.859 × 109 mol.cm-3). Additionally, the results indicated improvements in properties such as reduced weight loss, enhanced antioxidant and adhesive qualities, and better mechanical properties (2240 kPa). However, the optimal concentration of polydopamine must be determined to achieve the best properties for a wound dressing. Excessive polydopamine can increase the space between polymer chains, leading to a reduction in crosslinking density and storage modulus. Nevertheless, it can also increase the swelling ratio, degradation rate, pore size, porosity, antioxidant activity, and dopamine release. Therefore, identifying the optimal concentration for a functional hydrogel is crucial. Notably, the hydrogel containing 0.5 mg.mL-1 polydopamine exhibited outstanding cell viability (108 % on the third day), swelling capacity (480 %), storage modulus (2240 kPa), gelation time (3 min), antioxidant activity (42.27 %), and skin adherence (11 kPa), making it an optimal choice for advanced wound management. According to the findings, it is emphasized that the application of this particular hydrogel expedites wound healing, as indicated by wound closure and histological studies. ABBREVIATIONS.

Antimicrobial peptide immobilization on catechol-functionalized PCL/alginate wet-spun fibers to combat surgical site infection

Surgical site infection (SSI) caused by pathogenic bacteria leads to delayed wound healing and extended hospitalization. Inappropriate uses of antibiotics have caused a surge in SSI and common antibiotics are proving to be ineffective against SSI. Antimicrobial peptides (AMPs) can be a potential solution to prevent SSI because of their broad spectrum of antimicrobial activities. In this study, naturally sourced AMPs were studied along with microfibers, fabricated by a novel wet-spinning method using sodium alginate and polycaprolactone. Afterward, fibers were functionalized by the catechol groups of dopamine immobilizing nucleophilic AMPs on the surface. Conjugation between PCL and alginate resulted in fibers with smooth surfaces improving their mechanical strength via hydrogen bonds. Having an average diameter of 220 μm, the mechanical properties of the fiber complied with USP standards for suture size 3-0. Engineered microfibers were able to hinder the growth of Proteus spp., a pathogenic bacterium for at least 60 hours whereas antibiotic ceftazidime failed. When subjected to a linear incisional wound model study, accelerated healing was observed when the wound was closed using the engineered fiber compared to Vicryl. The microfibers promoted faster re-epithelialization compared to Vicryl proving their higher wound healing capacity.

Eggshell membrane powder reinforces adhesive polysaccharide hydrogels for wound repair

Multifunctional polysaccharide hydrogels with strong tissue adhesion, and antimicrobial and hemostatic properties are attractive wound healing materials. In this study, a chitosan-based hydrogel (HCS) was designed, and its properties were enhanced by incorporating oxidized eggshell membrane (OEM). Hydrogel characterization and testing results showed that the hydrogel had excellent antimicrobial properties, cytocompatibility, satisfactory adhesion properties on common substrates, and wet-state adhesion capacity. A rat liver injury model confirmed the significant hemostatic effect of the hydrogel. Finally, the ability of the hydrogel to promote wound healing was verified using rat skin wound repair experiments. Our findings indicate that HCS/OEM hydrogels with added eggshell membrane fibers have better self-healing properties, mechanical strength, adhesion, hemostatic properties, and biocompatibility than HCS hydrogels, in addition to having superior repair performance in wound repair experiments. Overall, the multifunctional polysaccharide hydrogels fabricated in this study are ideal for wound repair.

Bioarchitectural Design of Bioactive Biopolymers: Structure-Function Paradigm for Diabetic Wound Healing

Chronic wounds such as diabetic ulcers are a major complication in diabetes caused by hyperglycemia, prolonged inflammation, high oxidative stress, and bacterial bioburden. Bioactive biopolymers have been found to have a biological response in wound tissue microenvironments and are used for developing advanced tissue engineering strategies to enhance wound healing. These biopolymers possess innate bioactivity and are biodegradable, with favourable mechanical properties. However, their bioactivity is highly dependent on their structural properties, which need to be carefully considered while developing wound healing strategies. Biopolymers such as alginate, chitosan, hyaluronic acid, and collagen have previously been used in wound healing solutions but the modulation of structural/physico-chemical properties for differential bioactivity have not been the prime focus. Factors such as molecular weight, degree of polymerization, amino acid sequences, and hierarchical structures can have a spectrum of immunomodulatory, anti-bacterial, and anti-oxidant properties that could determine the fate of the wound. The current narrative review addresses the structure-function relationship in bioactive biopolymers for promoting healing in chronic wounds with emphasis on diabetic ulcers. This review highlights the need for characterization of the biopolymers under research while designing biomaterials to maximize the inherent bioactive potency for better tissue regeneration outcomes, especially in the context of diabetic ulcers.

Laminin mimetic angiogenic and collagen peptide hydrogel for enhance dermal wound healing

Laminins are essential in basement membrane architecture and critical in re-epithelialization and angiogenesis. These processes and collagen deposition are vital in skin wound healing. The role of angiogenic peptides in accelerating the wound-healing process has been known. The bioactive peptides could be a potential approach due to their similar effects as growth factors and inherent biocompatible and biodegradable nature with lower cost. They can also recognize ligand-receptor interaction and mimic the extracellular matrix. Here, we report novel angiogenic DYVRLAI, CDYVRLAI, angiogenic-collagen PGPIKVAV, and Ac-PGPIKVAV peptides conjugated sodium carboxymethyl cellulose hydrogel, which was designed from laminin. The designed peptide exhibits a better binding with the α3β1, αvβ3, and α5β1 integrins and CXCR2 receptor, indicating their angiogenic and collagen binding efficiency. The peptides were evaluated to stimulate wound healing in full-thickness excision wounds in normal and diabetic mice (type II). They demonstrated their efficacy in terms of angiogenesis (CD31), re-epithelialization through regeneration of the epidermis (H&E), and collagen deposition (MT). The synthesized peptide hydrogel (DYVRLAI and CDYVRLAI) showed enhanced wound contraction up to 10.1 % and 12.3 % on day 7th compared to standard becaplermin gel (49 %) in a normal wound model. The encouraging results were also observed with the diabetic model, where these peptides showed a significant decrease of 5.20 and 5.17 % in wound size on day 10th compared to the commercial gel (9.27 %). These outcomes signify that the modified angiogenic peptide is a cost effective, novel peptide motif to promote dermal wound healing in both models.

Catecholamines polymerization crosslinking for alginate-based burn wound dressings developed with ciprofloxacin and zinc oxide interactions

There is an increasing demand for stable and durable wound dressings to treat burn injuries and infections. Bioactive electrospun nanofibrous mats with antibacterial properties are promising for wound dressing usage. Electrospinning of biopolymers for wound dressing applications needs post-spinning crosslinking to prevent mat dissolution in moist wound environments. Here, we prepared durable wound dressing by using the Dopamine (DA) polymerization crosslinking in Alginate (ALG)/Polyvinyl alcohol (PVA) nanofibrous mats, which are developed by Ciprofloxacin (CIP) and Zinc oxide (ZO). The nanofibrous mats were investigated by FESEM, FTIR, mechanical strength, water contact angle, degradation, degree of swelling, and WVTR tests. The analyses demonstrate the nanofibrous mats with uniform and unbranched fibers, with a hydrophilic nature, which was porous, durable, and stable. Also, it showed the CIP and ZO addition enhanced their durability by crosslinking reinforcement. In addition, the drug release and antibacterial assays demonstrated the pH-sensitive release with more drug release at higher pH (bacterial invasion) and impressive antibacterial activity (up to 99 %). In the burn wound model in rats, the ALG/PVA/DA/CIP/ZO nanofibrous mats displayed excellent wound healing ability in wound closure and tissue regeneration. Also, complete re-epithelization and remodeling and highest collagen synthesis in histological assessment.

Progress of polysaccharide-based tissue adhesives

Recently, polymer-based tissue adhesives (TAs) have gained the attention of scientists and industries as alternatives to sutures for sealing and closing wounds or incisions because of their ease of use, low cost, minimal tissue damage, and short application time. However, poor mechanical properties and weak adhesion strength limit the application of TAs, although numerous studies have attempted to develop new TAs with enhanced performance. Therefore, next-generation TAs with improved multifunctional properties are required. In this review, we address the requirements of polymeric TAs, adhesive characteristics, adhesion strength assessment methods, adhesion mechanisms, applications, advantages and disadvantages, and commercial products of polysaccharide (PS)-based TAs, including chitosan (CS), alginate (AL), dextran (DE), and hyaluronic acid (HA). Additionally, future perspectives are discussed.

A facile method to fabricate versatile keratin cryogels for tissue engineering applications

Human hair keratin (HHK) has been extensively explored as a biomaterial for soft tissue regeneration due to their excellent bioactivity and biocompatibility. The possibility to fabricate HHK into three-dimensional (3D) hydrogels with physical properties resembling soft tissues has been well demonstrated. However, conventional keratin hydrogels often exhibit a dense architecture that could hinder cell filtration. In the present study, HHK-based cryogels were fabricated using a freeze-thaw (FT) method, where oxidized dopamine (ODA) was employed to covalently crosslink thiol/amine rich-keratin molecules at sub-zero temperatures. The obtained HHK-ODA cryogels have micron-sized pores ranging between 100 and 200 μm and mechanical properties that can be tuned by varying the crosslinking density between ODA and HHK. Through optimization of the weight content of ODA and the number of FT cycles, the compressive strengths and stiffnesses of these cryogels achieved 15-fold increments from ∼1.5 kPa to ∼22 kPa and ∼300 Pa to ∼5000 Pa, respectively. The HHK-ODA cryogels competently supported human dermal fibroblast spreading and proliferation. Overall, this study exhibited a facile method to fabricate mechanically superior keratin-based cryogels with cell compatible microarchitecture, circumventing the need for complicated chemical modifications and the use of cytotoxic crosslinkers.

Colorimetric pH-responsive and hemostatic hydrogel-based bioadhesives containing functionalized silver nanoparticles

Here we develop and characterize a dual-cross-linked pH-responsive hydrogel based on the carboxyethyl chitosan-oxidized sodium alginate (CAO) containing silver nanoparticles (Ag NPs) functionalized with tannic acid/red cabbage (ATR). This hybrid hydrogel is formed via covalent and non-covalent cross-linking. The adhesive strength measured in contact with cow skin and compression strength is measured more than 3 times higher than that of CAO. Importantly, the incorporation of 1 ​wt% ATR into CAO significantly enhances the compression strength of CAO from 35.1 ​± ​2.1 ​kPa to 97.5 ​± ​2.9 ​kPa. Moreover, the cyclic compression tests confirm significantly higher elastic behavior of CAO after the addition of ATR-functionalized NPs to CAO. The CAO/ATR hydrogel is pH-sensitive and indicated remarkable color changes in different buffer solutions. The CAO/ATR also shows improved hemostatic properties and reduced clotting time compared to the clotting time of blood in contact with CAO hydrogel. In addition, while CAO/ATR is effective in inhibiting the growth of both Gram-positive and Gram-negative bacteria, CAO is only effective in inhibiting the growth of Gram-positive bacteria. Finally, the CAO/ATR hydrogel is cytocompatible with L929 fibroblasts. In summary, the resulting CAO/ATR hydrogel shows promising results in designing and constructing smart wound bioadhesives with high cytocompatibility, antibacterial properties, blood coagulation ability, and fast self-healing properties.

New Accelerated Corrosion Test Method Simulating Atmospheric Corrosion of Complex Phase Steel Combining Cyclic Corrosion Test and Electrochemically Accelerated Corrosion Test

The automobile industry commonly uses cyclic corrosion tests (CCTs) to evaluate the durability of materials. However, the extended evaluation period required by CCTs can pose challenges in this fast-paced industry. To address this issue, a new approach that combines a CCT with an electrochemically accelerated corrosion test has been explored, to shorten the evaluation period. This method involves the formation of a corrosion product layer through a CCT, which leads to localized corrosion, followed by applying an electrochemically accelerated corrosion test using an agar gel electrolyte to preserve the corrosion product layer as much as possible. The results indicate that this approach can achieve comparable localized corrosion resistance, with similar localized corrosion area ratios and maximum localized corrosion depths to those obtained through a conventional CCT in half the time.

Mussel-Inspired Multifunctional Hydrogels with Adhesive, Self-Healing, Antioxidative, and Antibacterial Activity for Wound Healing

Antibacterial hydrogel wound dressings with adhesive and antioxidant activity are desirable for treating skin injuries in clinical care. Hereby, a series of multifunctional hydrogel wound dressings with high adhesive, self-healing, antioxidant, and antibacterial activity were designed and fabricated using dopamine (DA) and quercetin (QT). The multifunctional hydrogels were constructed by the interpenetrated quaternized chitosan chain segments and polyacrylamide network. The catechol groups on DA, QT, and the quaternary ammonium groups in the hydrogel system endow hydrogels with high strength, excellent adhesion, and self-healing ability. The results confirmed the admirable hemocompatibility and remarkable antibacterial activity of the multifunction hydrogels against Staphylococcus aureus and Escherichia coli. Consequently, multifunction hydrogels with satisfactory adhesive and antibacterial activity are appropriate alternative materials in the fields of tissue adhesive and wound dressing applications.

A review on the synthesis and development of alginate hydrogels for wound therapy

Convenient and low-cost dressings can reduce the difficulty of wound treatment. Alginate gel dressings have the advantages of low cost and safe usage, and they have obvious potential for development in biomedical materials. Alginate gel dressings are currently a research area of great interest owing to their versatility, intelligent, and their application attempts in treating complex wounds. We present a detailed summary of the preparation of alginate hydrogels and a study of their performance improvement. Herein, we summarize the various applications of alginate hydrogels. The research focuses in this area mainly include designing multifunctional dressings for the treatment of various wounds and fabricating specialized dressings to assist physicians in the treatment of complex wounds (TOC). This review gives an outlook for future directions in the field of alginate hydrogel dressings. We hope to attract more research interest and studies in alginate hydrogel dressings, thus contributing to the creation of low-cost and highly effective wound treatment materials.

In Situ Nanoarchitectonics of a MOF Hydrogel: A Self-Adhesive and pH-Responsive Smart Platform for Phototherapeutic Delivery

Metal-organic frameworks (MOFs) have dramatically changed the fundamentals of drug delivery, catalysis, and gas storage as a result of their porous geometry, controlled architecture, and ease of postsynthetic modification. However, the biomedical applications of MOFs still remain a less explored area due to the constraints associated with handling, utilizing, and site-specific delivery. The major drawbacks associated with the synthesis of nano-MOFs are related to the lack of control over particle size and inhomogeneous dispersion during doping. Therefore, a smart strategy for the in situ growth of a nano-metal-organic framework (nMOF) has been devised to incorporate it into a biocompatible polyacrylamide/starch hydrogel (PSH) composite for therapeutic applications. In this study, the post-treatment of zinc metal ion cross-linked PSH with the ligand solution generated the nZIF-8@PAM/starch composites (nZIF-8, nano-zeolitic imidazolate framework-8). The ZIF-8 nanocrystals thus formed have been found to be evenly dispersed throughout the composites. This newly designed nanoarchitectonics of an MOF hydrogel was found to be self-adhesive, which also exhibited improved mechanical strength, a viscoelastic nature, and a pH-responsive behavior. Taking advantage of these properties, it has been utilized as a sustained-release drug delivery platform for a potential photosensitizer drug (Rose Bengal). The drug was initially diffused into the in situ hydrogel, and then the entire scaffold was analyzed for its potential in photodynamic therapy against bacterial strains such as E. coli and B. megaterium. The Rose Bengal loaded nano-MOF hydrogel composite exhibited remarkable IC₅₀ values within the range of 7.37 ± 0.04 and 0.51 ± 0.05 μg/mL for E. coli and B. megaterium. Further, reactive oxygen species (ROS) directed antimicrobial potential was validated using a fluorescence-based assay. This smart in situ nanoarchitectonics hydrogel platform can also serve as a potential biomaterial for topical treatment including wound healing, lesions, and melanoma.

Graft Polymerization of Acrylamide in an Aqueous Dispersion of Collagen in the Presence of Tributylborane

Graft copolymers of collagen and polyacrylamide (PAA) were synthesized in a suspension of acetic acid dispersion of fish collagen and acrylamide (AA) in the presence of tributylborane (TBB). The characteristics of the copolymers were determined using infrared spectroscopy and gel permeation chromatography (GPC). Differences in synthesis temperature between 25 and 60 °C had no significant effect on either proportion of graft polyacrylamide generated or its molecular weight. However, photomicrographs taken with the aid of a scanning electron microscope showed a breakdown of the fibrillar structure of the collagen within the copolymer at synthesis temperatures greater than 25 °C. The mechanical properties of the films and the cytotoxicity of the obtained copolymer samples were studied. The sample of a hybrid copolymer of collagen and PAA obtained at 60 °C has stronger mechanical properties compared to other tested samples. Its low cytotoxicity, when the monomer is removed, makes materials based on it promising in scaffold technologies.

Solid phase synthesis of oxidized sodium alginate-tobramycin conjugate and its application for infected wound healing

Although sodium alginate possesses excellent biocompatibility, moisture retention and easy availability, it cannot be directly applied for infected wound treatment. Herein, a solid phase synthesis strategy was proposed to fabricate oxidized sodium alginate-tobramycin conjugate (OSA-TOB) for anti-infection dressing development. 13C nuclear magnetic resonance spectra indicated that the oxidization process does not change the ratio of β-D-mannuronic acid (M) / α-L-guluronic acid (G) in OSA and the oxidization reaction shows no stereoselectivity. Elemental analysis disclosed that the graft ratio of tobramycin in OSA-TOB is 13.8 %. Antibacterial test indicated that OSA-TOB can effectively inhibit four prevalent pathogenic bacterial S.epidermidis, P. aeruginosa, S. aureus and E. coli via a different antibacterial mechanism compared to the original TOB. Hemolysis and cytotoxicity assays shown that OSA-TOB have superior hemocompatibility and cytocompatibility. Infected wound healing assay shown that the healing rate of OSA-TOB is the highest. Further analysis indicated that OSA-TOB can reduce the local inflammatory response, accelerate the form of epithelium and collagen deposition. In conclusions, OSA-TOB synthesized in solid phase can be potentially applied as a promising anti-infection wound dressing.

Enhancing cartilage repair with optimized supramolecular hydrogel-based scaffold and pulsed electromagnetic field

Functional tissue engineering strategies provide innovative approach for the repair and regeneration of damaged cartilage. Hydrogel is widely used because it could provide rapid defect filling and proper structure support, and is biocompatible for cell aggregation and matrix deposition. Efforts have been made to seek suitable scaffolds for cartilage tissue engineering. Here Alg-DA/Ac-β-CD/gelatin hydrogel was designed with the features of physical and chemical multiple crosslinking and self-healing properties. Gelation time, swelling ratio, biodegradability and biocompatibility of the hydrogels were systematically characterized, and the injectable self-healing adhesive hydrogel were demonstrated to exhibit ideal properties for cartilage repair. Furthermore, the new hydrogel design introduces a pre-gel state before photo-crosslinking, where increased viscosity and decreased fluidity allow the gel to remain in a semi-solid condition. This granted multiple administration routes to the hydrogels, which brings hydrogels the ability to adapt to complex clinical situations. Pulsed electromagnetic fields (PEMF) have been recognized as a promising solution to various health problems owing to their noninvasive properties and therapeutic potentials. PEMF treatment offers a better clinical outcome with fewer, if any, side effects, and wildly used in musculoskeletal tissue repair. Thereby we propose PEMF as an effective biophysical stimulation to be 4th key element in cartilage tissue engineering. In this study, the as-prepared Alg-DA/Ac-β-CD/gelatin hydrogels were utilized in the rat osteochondral defect model, and the potential application of PEMF in cartilage tissue engineering were investigated. PEMF treatment were proven to enhance the quality of engineered chondrogenic constructs in vitro, and facilitate chondrogenesis and cartilage repair in vivo. All of the results suggested that with the injectable self-healing adhesive hydrogel and PEMF treatment, this newly proposed tissue engineering strategy revealed superior clinical potential for cartilage defect treatment.

•

The supramolecular Alg-DA/Ac-β-CD/gelatin hydrogel with physical and chemical multiple crosslinking was fabricated.

•

The multi-crosslinked structure of the hydrogels endows strong injection, adhesion abilities and mechanical performance.

•

A pre-gel state of the hydrogel grants it more administration routes and ability to adapt to complex clinical scenarios.

•

Pulsed electromagnetic field (PEMF) serves as the 4^th element in mesenchymal stem cell-based cartilage tissue engineering.

•

Bioinformatics analysis reveal that PEMF regulates chondrogenesis and cell hypertrophy via ERK and p38 MAPK pathways.

A starch-regulated adhesive hydrogel dressing with controllable separation properties for painless dressing change

The development of hydrogel dressings provides unprecedented opportunities for clinical medicine. However, the traditional hydrogel dressings cannot achieve controllable adhesion and separation, which often brings unbearable pain and secondary damage to patients during removal. In this work, a starch-regulated adhesive hydrogel dressing with controllable separation properties is reported. This hydrogel dressing can achieve rapid separation through the dissociation competition mechanism of polar small molecules, which will not cause any damage or discomfort to the skin or tissues, and greatly facilitate dressing replacement. The adhesive strength of the hydrogel reaches 0.06 MPa, and remains relatively stable after repeated utilization. Meanwhile, the inhibition rate of the hydrogel for E. coli, S. aureus and C. albicans is more than 99.9%. At the same time, the hydrogel also has good swelling properties, mechanical properties and biocompatibility, and exhibits a high healing efficiency (95.01 ± 3.76%) in a rat full-thickness skin defect model. This novel hydrogel dressing with controllable separation properties provides a facile and effective method for wound management and treatment, and has great promise for long-term application of wound dressings.

Mussel‐Inspired Biomaterials: From Chemistry to Clinic

After several billions of years, nature still makes decisions on its own to identify, develop, and direct the most effective material for phenomena/challenges faced. Likewise, and inspired by the nature, we learned how to take steps in developing new technologies and materials innovations. Wet and strong adhesion by Mytilidae mussels (among which Mytilus edulis—blue mussel and Mytilus californianus—California mussel are the most well‐known species) has been an inspiration in developing advanced adhesives for the moist condition. The wet adhesion phenomenon is significant in designing tissue adhesives and surgical sealants. However, a deep understanding of engaged chemical moieties, microenvironmental conditions of secreted proteins, and other contributing mechanisms for outstanding wet adhesion mussels are essential for the optimal design of wet glues. In this review, all aspects of wet adhesion of Mytilidae mussels, as well as different strategies needed for designing and fabricating wet adhesives are discussed from a chemistry point of view. Developed muscle‐inspired chemistry is a versatile technique when designing not only wet adhesive, but also, in several more applications, especially in the bioengineering area. The applications of muscle‐inspired biomaterials in various medical applications are summarized for future developments in the field.

'Multiple and short-range' cross-linking of dialdehyde carboxymethyl cellulose contributes to regulating the physicochemical property of collagen fibril

Collagen fibril hydrogel (CH), with controllable micro-structure, sufficient modifying sites and excellent biocompatibility, has received widely attention in the regulation of biomacromolecules. Herein, dialdehyde carboxymethyl cellulose (DCMC) in different -CHO contents and molecular weights demonstrated two types of cross-linking behaviors to CH, 'limited and long-range' or 'multiple and short range' cross-linking, corresponding to -CHO content ranged from 0 to  53 % and 53- 90 %, respectively. In regard of structure, non-destroying effect of DCMC on collagen was supported by FT-IR and XRD analysis. CH cross-linked by DCMC (CH-DC) showed declining porosity and aggregating fibrils as -CHO content of DCMC rising. In regard of physicochemical properties, DCMC with >53 % -CHO strengthened the hydrophilicity, thermal stability and degradation resistance of CH-DC. Also, there was 110 % growth on gel strength, 86 Pa enhancements on storage modulus, and 4.6 times decrease on the swelling ratio of CH-DC. Results indicated that DCMC with 79 % -CHO remarkably improved the physicochemical properties of CH via developing sufficient Schiff-base bonds with collagen fibril in a short distance. This study distinguished two patterns of DCMC cross-linking from physicochemical view. In other words, DCMC is potential to meet the requirement of protein-based materials with different expectations by adjusting its -CHO content and molecular weight.

Efficient Antimicrobial Effect of Alginate-Catechol/Fe2+ Coating on Hydroxyapatite toward Oral Care Application

Reducing the formation of oral bacterial biofilms is critical to prevent common dental diseases. Though many strategies for restricting bacterial adhesion on tooth surfaces have been reported, a simple method for efficient oral bacteriostasis is still highly expected. Herein, we have proved a soft gel made of an alginate-catechol conjugate (SA-DA) and the ferrous cation (Fe²⁺) as an effective antibacterial coating on hydroxyapatite (HAP, a tooth model). As suggested by quartz crystal microbalance (QCM) measurements, SA-DA/Fe²⁺ coating possessed a high binding affinity to HAP without destruction by either immersion in artificial saliva or simulated tooth brushing. Significantly less protein (bovine serum albumin) and Streptococcus mutans (S. mutans, an oral bacterial model) could be found on HAP after coating with SA-DA/Fe²⁺, indicating that the prepared gel could resist well the adhesion of biofouling and microbes due to its hydrophilicity. Notably, such an antibacterial effect (around 70% S. mutans was inhibited) could be maintained for 3 d, which resulted from the extremely good stability of SA-DA/Fe²⁺ coating, as confirmed by QCM analysis. Our results may offer possibilities for developing applications in order to further improve oral hygiene.

Fabricating Network-Link Acetamiprid-Loading Micelles Based on Dopamine-Functionalized Alginate and Alkyl Polyglucoside To Enhance Folia Deposition and Retention

The development of an eco-friendly nanopesticide formulation can alleviate the problems of low pesticide utilization and environmental pollution. However, the development of green nanopesticide carriers with ideal physical properties and specific bioavailability is still a challenging task at present. In this study, we propose a novel binary additive pesticide carrier system that is a functional polysaccharide-based polymer/surfactant (Alg-DA/APG) to improve the deposition and retention of pesticide droplets. The self-assembled micelle morphology of Alg-DA/APG and its effect on the apparent viscosity were investigated by transmission electron microscopy (TEM) and a Discovery HR-2 rotational rheometer. Surface tension was carried out to investigate the surface activity and critical micelle concentration (CMC) of Alg-DA/APG. The drop impacting experiments exhibited superior antisplash performance of Alg-DA/APG. Furthermore, a binary additive was used as the carrier material and loaded acetamiprid to prepare nanopesticide formulation Ace@Alg-DA/APG. The encapsulation efficiency (EE) and acetamiprid release behavior from Ace@Alg-DA/APG were also studied. Moreover, the dynamic contact angle (DCA) and retention experiment showed that the DCA and wetting radius at 600 s were, respectively, 6.8 ± 2.39° and 4.044 ± 0.0662 mm for the Ace@0.05 wt % Alg-DA/0.05 wt % APG on the banana foliage surface, and its retention rates on foliage surface were up to 74.80% after washing. The novel binary additive as a nanopesticide carrier has the potential to alleviate the problems of low pesticide utilization and environmental pollution in the future.

Polysaccharide-based electroconductive hydrogels: Structure, properties and biomedical applications

Architecting an appropriate platform for biomedical applications requires setting a balance between simplicity and complexity. Polysaccharides (PSAs) play essential roles in our life in food resources, structural materials, and energy storage capacitors. Moreover, the diversity and abundance of PSAs have made them an indispensable part of food ingredients and cosmetics. PSA-based hydrogels have been extensively reviewed in biomedical applications. These hydrogels can be designed in different forms to show optimum performance. For instance, electroactive PSA-based hydrogels respond under an electric stimulus. Such performance can be served in stimulus drug release and determining cell fate. This review classifies and discusses the structure, properties, and applications of the most important polysaccharide-based electroactive hydrogels (agarose, alginate, chitosan, cellulose, and dextran) in medicine, focusing on their usage in tissue engineering, flexible electronics, and drug delivery applications.

Novel dopamine-modified oxidized sodium alginate hydrogels promote angiogenesis and accelerate healing of chronic diabetic wounds

Herein, the dopamine (DA) was grafted with oxidized sodium alginate (OSA) via Schiff base reduction reaction, aiming to fabricate novel DA-grafted OSA (OSA-DA) hydrogels with enhanced biocompatibility and suitable adhesion for clinical applications. The chemical structures of OSA-DA were characterized via UV-Vis, FTIR and ¹H NMR spectroscopy analysis. The hydrogel characteristics, biocompatibility, as well as the chronic diabetic wound healing efficacy were investigated. Our results demonstrated that DA was grafted with OSA successfully with highest grafting rate of 7.50%. Besides, OSA-DA hydrogels possessed suitable swelling ratio and appropriate adhesion characteristics. Additionally, OSA-DA exhibited satisfactory cytocompatibility and cell affinity in L-929 cells, and superior biocompatibility in SD rats. Moreover, OSA-DA exerted remarkable promoting effects on migration and tube formation of human umbilical vein endothelial cells (HUVECs). Studies on full-thickness excision chronic diabetic wounds further revealed that OSA-DA hydrogels could accelerate healing via promoting angiogenesis, reducing inflammation response, and stimulating collagen deposition. Overall, our studies would provide basis for SA-based hydrogels as clinical wound dressings.

Investigations on the Influence of Collagen Type on Physicochemical Properties of PVP/PVA Composites Enriched with Hydroxyapatite Developed for Biomedical Applications

Nowadays, a great attention is directed into development of innovative multifunctional composites which may support bone tissue regeneration. This may be achieved by combining collagen and hydroxyapatite showing bioactivity, osteoconductivity and osteoinductivity with such biocompatible polymers as polyvinylpyrrolidone (PVP) and poly(vinyl alcohol) (PVA). Here PVA/PVP-based composites modified with hydroxyapatite (HAp, 10 wt.%) and collagen (30 wt.%) were obtained via UV radiation while two types of collagen were used (fish and bovine) and crosslinking agents differing in the average molecular weight. Next, their chemical structure was characterized using Fourier transform infrared (FT-IR) spectroscopy, roughness of their surfaces was determined using a stylus contact profilometer while their wettability was evaluated by a sessile drop method followed by the measurements of their surface free energy. Subsequently, swelling properties of composites were verified in simulated physiological liquids as well as the behavior of composites in these liquids by pH measurements. It was proved that collagen-modified composites showed higher swelling ability (even 25% more) compared to unmodified ones, surface roughness, biocompatibility towards simulated physiological liquids and hydrophilicity (contact angles lower than 90°). Considering physicochemical properties of developed materials and a possibility of the preparation of their various shapes and sizes, it may be concluded that developed materials showed great application potential for biomedical use, e.g., as materials filling bone defects supporting their treatments and promoting bone tissue regeneration due to the presence of hydroxyapatite with osteoinductive and osteoconductive properties.

Photocrosslinkable gelatin/collagen based bioinspired polyurethane-acrylate bone adhesives with biocompatibility and biodegradability

Hard or soft tissue adhesives have been presented as a promising candidate to replace traditional wound closure methods. However, there are mechanical strength problems in biological adhesives and biocompatibility problems in synthetic-based adhesives. At this point, we aimed to remove all these disadvantages and produce a single adhesive that contains all the necessary features and acrylate functionalized UV-curable polyurethane formulations were produced with high crosslink density, high adhesion strength, biocompatibility and injectable property for easy application as potential biomedical adhesives. Aliphatic isophorone diisocyanate (IPDI) was used as the isocyanate source and β-cyclodextrin was used for host-guest relationship with gentamicin by crosslinking. Proteins (gelatin (GEL), collagen (COL)) and PEGs of various molecular weight ranges (P200, P400, P600) were selected as the polyol backbone for polyurethane synthesis due to their multiple biological activities such as biocompatibility, biodegradability, biomimetic property. Several techniques have been used to characterize the structural, thermal, morphological, and various other physicochemical properties of the adhesive formulations. Besides, the possibility of its use as a hard tissue adhesive was investigated by evaluating the tissue adhesion strength in vitro and ex vivo via a universal testing analyzer in tensile mode. Corresponding adhesive formulations were evaluated by in vitro and in vivo techniques for biocompatibility. The best adhesion strength results were obtained as 3821.0 ± 214.9, and 3722.2 ± 486.8 kPa, for IPDI-COL-P200 and IPDI-GEL-P200, respectively. Good antibacterial activity capability toward Escherichia coli Pseudomonas aeruginosa, and Staphylococcus aureus were confirmed using disc diffusion method. Moreover, cell viability assay demonstrated that the formulations have no significant cytotoxicity on the L929 fibroblast cells. Most importantly, we finally performed the in vivo biodegradability and in vivo biocompatibility evaluations of the adhesive formulations on rat model. Considering their excellent cell/tissue viability, fast curable, strong adhesion, high antibacterial character, and injectability, these adhesive formulations have significant potential for tissue engineering applications.

Current update on psyllium and alginate incorporate for interpenetrating polymer network (IPN) and their biomedical applications

Natural polysaccharides and their designed structures are extremely valuable due to their intrinsic pharmacological properties and are also used as pharmaceutical aids. These naturally occurring polysaccharides (e.g., psyllium and alginate) are gaining popularity for their use in the preparation of interpenetrating polymer network (IPN) materials with improved swelling ability, biodegradability, stability, non-cytotoxic, biocompatibility, and cost-effectiveness. IPN is prepared sequentially or simultaneously by microwave irradiation, casting evaporation, emulsification cross-linking, miniemulsion/inverse miniemulsion technique, and radiation polymerization methods. In addition, the prepared IPNs have has been extensively characterized using various analytical and imaging techniques before sustainable deployment for multiple applications. Regardless of these multi-characteristic attributes, the current literature lacks a detailed overview of the biomedical aspects of psyllium, alginate, and their engineered IPN structures. Herein, we highlight the unique synthesis, structural, and biomedical considerations of psyllium, alginate, and engineered IPN structures. In this review, a wide range of biomedical applications, such as role as a drug carrier for sustain delivery, wound dressing, tissue engineering, and related miscellaneous application of psyllium, alginate, and their IPN structures described with appropriate examples. Further research will be carried out for the development of IPN using psyllium and alginate, which will be a smart and active carrier for drugs used in the treatment of life-threatening diseases due to their inherent pharmacological potential such as hypoglycemic, immunomodulatory, antineoplastic, and antimicrobial.

Polyglutamic acid grafted dopamine modified collagen-polyvinyl alcohol hydrogel for a potential wound dressing

Natural collagen has good biocompatibility and ability to promote tissue regeneration and repair, but the poor mechanical properties and intolerance of degradation of natural collagen limit its applications in the biomedical field. In this research, we synthesized a skin wound repair hydrogel with good biological activity, high strength and excellent water absorption properties. Inspired by the theory of wet healing, dopamine was introduced into the side chain of the water-absorbing polymer polyglutamic acid to synthesize a cross-linking agent (PGAD) with both water absorption and cell adhesion ablities, and then it was introduced into collagen/polyvinyl alcohol (PVA-COL) system to form a double network hydrogel. Scanning electron microscope observation of the morphological characteristics of the hydrogel showed that after the introduction of PGAD, the hydrogel formed an obvious pore structure, and the swelling rate showed that the introduction of PGAD significantly improved the water absorption rate of the hydrogel.In addition, PVA-COL-PGAD hydrogel has good mechanical properties and water absorption behavior.In vitro experimental results revealed that the hydrogel has good biocompatibility. In vivo wound healing experiments showed that hydrogel can promote wound healing process.These results indicated that our hydrogel has great potential as a medical wound dressing.

A Critical Review on Polymeric Biomaterials for Biomedical Applications

Natural and synthetic polymers have been explored for many years in the field of tissue engineering and regeneration. Researchers have developed many new strategies to design successful advanced polymeric biomaterials. In this review, we summarized the recent notable advancements in the preparation of smart polymeric biomaterials with self-healing and shape memory properties. We also discussed novel approaches used to develop different forms of polymeric biomaterials such as films, hydrogels and 3D printable biomaterials. In each part, the applications of the biomaterials in soft and hard tissue engineering with their in vitro and in vivo effects are underlined. The future direction of the polymeric biomaterials that could pave a path towards successful clinical implications is also underlined in this review.

Alginate and alginate composites for biomedical applications

Alginate is an edible heteropolysaccharide that abundantly available in the brown seaweed and the capsule of bacteria such as Azotobacter sp. and Pseudomonas sp. Owing to alginate gel forming capability, it is widely used in food, textile and paper industries; and to a lesser extent in biomedical applications as biomaterial to promote wound healing and tissue regeneration. This is evident from the rising use of alginate-based dressing for heavily exuding wound and their mass availability in the market nowadays. However, alginate also has limitation. When in contact with physiological environment, alginate could gelate into softer structure, consequently limits its potential in the soft tissue regeneration and becomes inappropriate for the usage related to load bearing body parts. To cater this problem, wide range of materials have been added to alginate structure, producing sturdy composite materials. For instance, the incorporation of adhesive peptide and natural polymer or synthetic polymer to alginate moieties creates an improved composite material, which not only possesses better mechanical properties compared to native alginate, but also grants additional healing capability and promote better tissue regeneration. In addition, drug release kinetic and cell viability can be further improved when alginate composite is used as encapsulating agent. In this review, preparation of alginate and alginate composite in various forms (fibre, bead, hydrogel, and 3D-printed matrices) used for biomedical application is described first, followed by the discussion of latest trend related to alginate composite utilization in wound dressing, drug delivery, and tissue engineering applications.

Enhancing Biopolymer Hydrogel Functionality through Interpenetrating Networks

Traditional hydrogels are strong candidates for biomedical applications; however, they may suffer from drawbacks such as weak mechanics, static properties, and an inability to fully replicate aspects of the cellular microenvironment. These challenges can be addressed through the incorporation of second networks to form interpenetrating polymer network (IPN) hydrogels. The objective of this review is to establish clear trends on the enhanced functionality achieved by incorporating secondary networks into traditional, biopolymer-based hydrogels. These include mechanical reinforcement, 'smart' systems that respond to external stimuli, and the ability to tune cell-material interactions. Through attention to network structure and chemistry, IPN hydrogels may advance to meet challenging criteria for a wide range of biomedical fields.

Visible Light-Cured Antibacterial Collagen Hydrogel Containing Water-Solubilized Triclosan for Improved Wound Healing

Infection is one of several factors that can delay normal wound healing. Antibacterial wound dressings can therefore promote normal wound healing. In this study, we prepared an antibacterial wound dressing, consisting of visible light-cured methacrylated collagen (ColMA) hydrogel and a 2-hydroxypropyl-beta-cyclodextrin (HP-β-CD)/triclosan (TCS) complex (CD-ic-TCS), and evaluated its wound healing effects in vivo. The 1H NMR spectra of ColMA and CD-ic-TCS revealed characteristic peaks at 1.73, 5.55, 5.94, 6.43, 6.64, 6.84, 6.95, 7.31, and 7.55 ppm, indicating successful preparation of the two material types. In addition, ultraviolet-visible (UV-vis) spectroscopy proved an inclusion complex formation between HP-β-CD and TCS, judging by a unique peak observed at 280 cm-1. Furthermore, ColMA/CD-ic-TCS exhibited an interconnected porous structure, controlled release of TCS, good biocompatibility, and antibacterial activity. By in vivo animal testing, we found that ColMA/CD-ic-TCS had a superior wound healing capacity, compared to the other hydrocolloids evaluated, due to synergistic interaction between ColMA and CD-ic-TCS. Together, our findings indicate that ColMA/CD-ic-TCS has a clinical potential as an antibacterial wound dressing.

Recent Development of Alginate-Based Materials and Their Versatile Functions in Biomedicine, Flexible Electronics, and Environmental Uses

Alginate is a natural polysaccharide that is easily chemically modified or compounded with other components for various types of functionalities. The alginate derivatives are appealing not only because they are biocompatible so that they can be used in biomedicine or tissue engineering but also because of the prospering bioelectronics that require various biomaterials to interface between human tissues and electronics or to serve as electronic components themselves. The study of alginate-based materials, especially hydrogels, have repeatedly found new frontiers over recent years. In this Review, we document the basic properties of alginate, their chemical modification strategies, and the recent development of alginate-based functional composite materials. The newly thrived functions such as ionically conductive hydrogel or 3D or 4D cell culturing matrix are emphasized among other appealing potential applications. We expect that the documentation of relevant information will stimulate scientific efforts to further develop biocompatible electronics or smart materials and to help the research domain better address the medicine, energy, and environmental challenges faced by human societies.

Mussel-inspired hybrid network hydrogel for continuous adhesion in water

The mussel-inspired catechol-based strategy has been widely used in the development of adhesives. However, the properties of the obtained adhesives were still severely limited in a humid environment, particularly in water. In this study, a facile and versatile approach was proposed to prepare an underwater adhesion hydrogel. First, dopamine (DA) was grafted on oxidized carboxymethylcellulose (OCMC) to obtain dopamine-grafted oxidized carboxymethylcellulose (OCMC-DA). Second, the acrylamide (AM) monomer was conjugated with OCMC-DA by a Schiff base reaction, and then polymerized to form an OCMC-DA/PAM hydrogel. The properties of the resulting hydrogel have been fully characterized. The underwater adhesion strength of the hydrogel can reach as high as 86.3 ± 7.2 kPa and reduced to 43 ± 3.4 kPa after being immersed in water for 9 days. More remarkably, we found that the maximal adhesion strength was shown when the G' and G'' of the hydrogel were very close. Moreover, we demonstrated the mechanical properties of our fabricated hydrogel by compressive tests and rheological analysis. The adhesive hydrogel also exhibits excellent biocompatibility.

Applications of oxidized alginate in regenerative medicine

Because of its ideal degradation rate and features, oxidized alginate (OA) is selected as an appropriate substitute and has been introduced into hydrogels, microspheres, 3D-printed/composite scaffolds, membranes, and electrospinning and coating materials. By taking advantage of OA, the OA-based materials can be easily functionalized and deliver drugs or growth factors to promote tissue regeneration. In 1928, it was first found that alginate could be oxidized using periodate, yielding OA. Since then, considerable progress has been made in the research on the modification and application of alginate after oxidation. In this article, we summarize the key properties and existing applications of OA and various OA-based materials and discuss their prospects in regenerative medicine.

Click chemistry-based biopolymeric hydrogels for regenerative medicine

Click chemistry is not a single specific reaction, but describes ways of generating products which emulate examples in nature. Click reactions occur in one pot, are not disturbed by water, generate minimal and inoffensive byproducts, and are characterized by a high thermodynamic driving force, driving the reaction quickly and irreversibly towards a high yield of a single reaction product. As a result, over the past 15 years it has become a very useful bio-orthogonal method for the preparation of chemical cross-linked biopolymer-based hydrogel, in the presence of e.g. growth factors and live cells, or in-vivo. Biopolymers are renewable and non-toxic, providing a myriad of potential backbone toolboxes for hydrogel design. The goal of this review is to summarize recent advances in the development of click chemistry-based biopolymeric hydrogels, and their applications in regenerative medicine. In particular, various click chemistry approaches, including copper-catalyzed azide-alkyne cycloaddition reactions, copper-free click reactions (e.g. the Diels-Alder reactions, the strain-promoted azide-alkyne cycloaddition reactions, the radical mediated thiol-ene reactions, and the oxime-forming reactions), and pseudo-click reactions (e.g. the thiol-Michael addition reactions and the Schiff base reactions) are highlighted in the first section. In addition, numerous biopolymers, including proteins (e.g. collagen, gelatin, silk, and mucin), polysaccharides (e.g. hyaluronic acid, alginate, dextran, and chitosan) and polynucleotides (e.g. deoxyribonucleic acid), are discussed. Finally, we discuss biopolymeric hydrogels, cross-linked by click chemistry, intended for the regeneration of skin, bone, spinal cord, cartilage, and cornea. This article provides new insights for readers in terms of the design of regenerative medicine, and the use of biopolymeric hydrogels based on click chemistry reactions.

Polymeric Tissue Adhesives

Polymeric tissue adhesives provide versatile materials for wound management and are widely used in a variety of medical settings ranging from minor to life-threatening tissue injuries. Compared to the traditional methods of wound closure (i.e., suturing and stapling), they are relatively easy to use, enable rapid application, and introduce minimal tissue damage. Furthermore, they can act as hemostats to control bleeding and provide a tissue-healing environment at the wound site. Despite their numerous current applications, tissue adhesives still face several limitations and unresolved challenges (e.g., weak adhesion strength and poor mechanical properties) that limit their use, leaving ample room for future improvements. Successful development of next-generation adhesives will likely require a holistic understanding of the chemical and physical properties of the tissue-adhesive interface, fundamental mechanisms of tissue adhesion, and requirements for specific clinical applications. In this review, we discuss a set of rational guidelines for design of adhesives, recent progress in the field along with examples of commercially available adhesives and those under development, tissue-specific considerations, and finally potential functions for future adhesives. Advances in tissue adhesives will open new avenues for wound care and potentially provide potent therapeutics for various medical applications.

Alginate hydrogel dressings for advanced wound management

Wound healing is a complicated and continuous process affected by several factors, and it needs an appropriate surrounding to achieve accelerated healing. At present, various wound dressings are used for wound management, such as fiber, sponge, hydrogel, foam, hydrocolloid and so on. Hydrogels can provide mechanical support and moist environment for wounds, and are widely used in biomedical field. Alginate is a natural linear polysaccharide derived from brown algae or bacteria, consisting of repeating units of β-1,4-linked D-mannuronic acid (M) and L-guluronic acid (G) in different ratios. It is widely used in biomedical and engineering fields due to its good biocompatibility and liquid absorption capacity. Alginate-based hydrogels have been used in wound dressing, tissue engineering, and drug delivery applications for decades. In this review, we summarize the recent approaches in the chemical and physical preparation and the application of alginate hydrogels in wound dressings.

Innovation inspired by nature: Biocompatible self-healing injectable hydrogels based on modified-β-chitin for wound healing

Remarkable properties of hydrogels are compromised by failure to recover from damage, bringing their intended functions to an end. To address this, hydrogels can be functionalized with self-healing property to enable them to restore themselves after damage, thus, extending their lifetime. Herein, hydrogels were prepared by cross-linking acrylamide-modified β-chitin (Am-β-Chn) with alginate dialdehyde (ADA) to form Schiff base, showing IR characteristic peak at 1650 cm^-1, attributed to the stretching vibration of CN. The dynamic Schiff base and H-bond rendered the double crosslinked hydrogels self-healing as demonstrated by continuous step strain rheology. Characterization of the hydrogels revealed excellent biocompatibility, biodegradability, injectability and self-healing properties. Furthermore, the wound healing property of the hydrogels was investigated in vivo using zebrafish as a model system. Indirect application of Am-β-Chn/ADA hydrogel remarkably led to ~87% wound healing as compared to control which gave ~50%, suggesting that hydrogels are effective in accelerating wound healing. However, a clear understanding of the exact mechanism of its wound healing property remains to be investigated. To the best of our knowledge, this is the first innovation of developing novel double crosslinked Am-β-Chn/ADA hydrogels with both self-healing and accelerated wound healing properties, directly from marine-food wastes.

A high-strength double network polydopamine nanocomposite hydrogel for adhesion under seawater

A mussel-inspired catechol-based strategy has been widely used in the development of underwater adhesives.

Semi-interpenetrating nanosilver doped polysaccharide hydrogel scaffolds for cutaneous wound healing

The extensive advancement with novel wound dressing materials functionalized with desirable properties, often touted as a panacea for cuts and burns afflicting various pathologies. However, it would indeed be a hard task to isolate any such material which perfectly fits the needs of any biomedical issue at hand. Biocompatibility, biodegradability as well as non-toxicity of natural polysaccharide served as a versatile and tunable platform for designing natural polysaccharide based scaffolds as an attractive tool in tissue engineering with a greater degree of acceptability. In this regard, we aimed to fabricate a semi interpenetrating hydrogel via exploiting the nontoxic and immune-stimulatory nature of galacto-xyloglucan (PST001) which was further doped with silver nanoparticles to formulate SNP@PST. The wound healing potential of SNP@PST was then studied both with in vitro and preclinical mice models. The current study gives a formulation for cost effective preparation of polysaccharide hydrogels using acrylamide crosslinking with improved biocompatibility and degradability. Wound healing studies in mice proved the efficiency of gels for the clinical application wherein the incorporation of nanosilver greatly enhanced the antimicrobial activity.